Ir a la página of
manuales de instrucciones parecidos
-
Automobile
Dodge 3500
202 páginas 1.71 mb -
Automobile
Dodge 2009 Dakota
449 páginas 10.96 mb -
Automobile
Dodge 2004 Sprinter Carb & Chassis
272 páginas 22.71 mb -
Automobile
Dodge 2008 LX-48 Charger SRT8
442 páginas 5.32 mb -
Automobile
Dodge 2005 Sprinter Cargo
288 páginas 27.89 mb -
Automobile
Dodge 2004 HB Durango
386 páginas 6.22 mb -
Automobile
Dodge 2004 Ram 2500
426 páginas 7.22 mb -
Automobile
Dodge 2009 Charger SRT8
443 páginas 6.57 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Dodge 2009 Aspen. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Dodge 2009 Aspen o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Dodge 2009 Aspen se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Dodge 2009 Aspen, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Dodge 2009 Aspen debe contener:
- información acerca de las especificaciones técnicas del dispositivo Dodge 2009 Aspen
- nombre de fabricante y año de fabricación del dispositivo Dodge 2009 Aspen
- condiciones de uso, configuración y mantenimiento del dispositivo Dodge 2009 Aspen
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Dodge 2009 Aspen no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Dodge 2009 Aspen y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Dodge en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Dodge 2009 Aspen, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Dodge 2009 Aspen, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Dodge 2009 Aspen. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Chrysler LLC 81-326-0937 Second Edition Printed in U.S.A. Aspen/Dur ango OWNER’S MANUAL Hybrid Supplement 2009 149032 Aspen-Durango_Supp.qxd:149032cov 6/12/08 8:19 AM Page 1[...]
-
Página 2
VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor . DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. Y our driving ability can be seriously impaired with blood alcohol levels f[...]
-
Página 3
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 5 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................... 1 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]
-
Página 4
[...]
-
Página 5
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 1[...]
-
Página 6
INTRODUCTION This booklet is a supplement to the Owner’s Manual. This manual was prepar ed with the assistance of service and engineering specialists and is intended to aid the operators of Hybrid vehicles in understanding the opera- tion and requir ed maintenance procedures for such ve- hicles. This supplement applies to Hybrid vehicles only . Y[...]
-
Página 7
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 6 䡵 Hybrid System Operation .................. 7 ▫ Hybrid Operation ...................... 7 ▫ Hybrid V ehicle Operating Characteristics .... 1 0 ▫ Driving T o Achieve Maximum Fuel Economy ........................... 1 1 䡵 Important Hybr[...]
-
Página 8
A WORD ABOUT YOUR KEYS It is not recommended to leave the ignition switch in the ACC position for extended periods of time. This will discharge the 12-V olt battery and may degrade the bat- tery life and/or prevent the vehicle fr om starting. For information on using the vehicles accessories (radio, video system or power outlets) refer to “Electr[...]
-
Página 9
HYBRID SYSTEM OPERA TION Y our Hybrid vehicle combines the power of a gasoline engine and electric motors to minimize fuel consumption and emissions. This vehicle requir es no special fuels and never has to be plugged in to rechar ge. Understanding the unique characteristics of your vehicle will help ensure maximum performance and best fuel economy[...]
-
Página 10
• Climbing a hill • Charge level of high voltage battery • Engine temperature, transmission temperatur e or coolant temperature • Hybrid System malfunction (Hybrid service lamp on) • T ow/Haul activated • Hood is ajar • Shift lever position 2 or 1 NOTE: The gas engine can also automatically shut off with the shift lever in P ARK, REVE[...]
-
Página 11
green ⬙ READY ⬙ light illuminated in the instr ument clus- ter , but, again, the gas engine is not running. When you experience a “Silent Start” leave the key in the ON/RUN position, then simply place your foot on the brake pedal, move the shift lever into REVERSE or DRIVE and press the accelerator pedal to drive the Hybrid vehicle in the e[...]
-
Página 12
CAUTION! Car wash equipment damage, vehicle damage or a potential accident event could result if the car wash facility instructions for P ARK, NEUTRAL, DRIVE and REVERSE are not followed. Hybrid V ehicle Operating Characteristics Y our Hybrid vehicle operates differ ently compared to a Non-Hybrid vehicle. The following is a description of the major[...]
-
Página 13
function. The brake pedal has a lighter effort (longer travel) than during normal driving but provides full power assist. Climate Control (HV AC System) Y our Hybrid vehicle uses automatic temperature contr ol (A TC) HV AC system with specialized components. This HV AC system utilizes a humidity sensor , cabin infrared (IR) sensor , sun sensor , an[...]
-
Página 14
Moderate braking is particularly important since it al- lows you to maximize the energy converted and stor ed from the vehicle’s momentum by the Regenerative Brak- ing System (RBS). Additional T ips: • Observe posted speed limits. • Do not carry extra loads, when it is not necessary . • Perform all scheduled maintenance. IMPORT ANT HYBRID S[...]
-
Página 15
Additional Hybrid System electrical components: • Electric Power Steering Pump (12-V olt) • Electric A/C Compressor W ARNING! Y our vehicle has both a high voltage DC and AC system as well as a 12-V olt system. DC and AC high voltage are both extremely dangerous and can cause severe burns, electric shock, serious injury or even death. In order [...]
-
Página 16
High V oltage Battery Y our Hybrid vehicle is equipped with a maintenance free Nickel Metal-Hydride (NiMH) battery rated at approxi- mately 300-V olts. The high voltage battery is located under the second row seat. The high voltage battery has an internal electric fan and an interior air inlet to keep the battery cool. High V oltage Battery Locatio[...]
-
Página 17
NOTE: • Be sure to keep the battery air inlet vent (located within the interior of the vehicle along the front of the second row seats) fr ee from blockage to avoid over- heating the high voltage battery . • Stow all cargo, par cels, and luggage securely fastened in the rear of vehicle and not along the second r ow seat floor . If your vehicle [...]
-
Página 18
W ARNING! Never try to remove the high voltage service discon- nect. The high voltage service disconnect is used when your vehicle requires service by a trained technician at an authorized dealer . Failure to follow this warning can cause severe burns or electrical shock that may result in serious injury or death. Charge Assist — High V oltage Ba[...]
-
Página 19
W ARNING! • In order to avoid personal injuries or death, DO NOT TOUCH ANY EXPOSED HIGH VOL T AGE WIRING (ORANGE COLORED) inside or outside of your vehicle, an electric shock may occur . NEVER TOUCH THE ELECTRIC WIRING. • If fluid is leaking on the ground or leaks in some parts of the vehicle, never touch it because it may be Electrolyte (stron[...]
-
Página 20
[...]
-
Página 21
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Electrical Power Outlets .................. 2 0 3[...]
-
Página 22
ELECTRICAL POWER OUTLETS Using the vehicles accessories (radio, video system or power outlets) can discharge the 12-V olt battery , degrade the battery life and/or prevent the vehicle fr om starting. It is recommended to limit the use of the ACC mode to approximately 15 minutes to avoid dischar ging the 12- V olt battery . Refer to “Electric Powe[...]
-
Página 23
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Hybrid Instrument Cluster ................ 2 2 䡵 Instrument Cluster Description ............. 2 3 䡵 Hybrid Gauge ......................... 3 5 䡵 Hybrid Energy Center ................... 3 6 ▫ Hybrid System Operating Conditions ....... 3 6 䡵 Climate Controls ....................... 4 2 ▫[...]
-
Página 24
HYBRID INSTRUMENT CLUSTER 22 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]
-
Página 25
INSTRUMENT CLUSTER DESCRIPTION 1. Fuel Gauge The fuel gauge shows the level of fuel in the tank when ignition switch is in the ON position. 2. T emperature Gauge The temperature gauge indicates engine coolant tem- perature. Any reading within the normal range indicates that the cooling system is operating satisfactory . The temperature gauge will l[...]
-
Página 26
activated when the left/right turn signal is left on with the engine RPM vehicle speed greater than 15 mph (24 km/h) for more than 1 mile (1 km). 4. Low Fuel Light This indicator illuminates when the fuel gauge reads 1/16 of a tank or less. After the Low Fuel W arning Light turns on, some changes in driveability like reduced power and high idle may[...]
-
Página 27
CAUTION! Driving with a hot engine cooling system could damage your vehicle. If the temperature light is on, safely pull over and stop the vehicle. Press the TOW/HAUL button and idle the vehicle in NEU- TRAL with the air conditioner turned of f until the light turns off. If the light remains on, turn the engine off immediately and call for service.[...]
-
Página 28
The V ehicle Security Light will also illuminate for ap- proximately thr ee seconds when the ignition is first turned ON. 12. Anti-Lock Brake (ABS) W arning Light This light monitors the Anti-Lock Brake System (ABS) which is described in the Owner’s Manual. This light will come on when the ignition key is turned to the ON position and may stay on[...]
-
Página 29
15. Shift Lever Indicator The electronic shift lever indicator is self-contained within the instrument cluster . It displays the position of the transmission shift lever , and the relation of each position to all other positions. For a good signal the display will place a box around the selected transmission range (PRND21). If the PRND21 displays a[...]
-
Página 30
The outside temperature will display in the odometer for non-EVIC equipped vehicles. Pressing the trip odometer RESET button toggles the feature back to the odometer . Change Oil Message Y our vehicle is equipped with an engine oil change indicator system. The “Change Oil” message will flash in the instrument cluster odometer for appr oximately[...]
-
Página 31
U.S. Federal regulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. Ther e- fore, if the odometer r eading is changed during repair or replacement, be sur e to keep a record of the r eading before and after the service so that the corr ect mileage can b[...]
-
Página 32
21. Electronic Throttle Contr ol (ETC) This light informs you of a problem with the Electronic Thr ottle Control (ETC) system. If a problem is detected, the light will come on while the engine is running. If the light r emains on with the engine running your vehicle will usually be drivable, however , see your authorized dealer for service as soon [...]
-
Página 33
23. READY When the ignition key is turned to the ST ART position, the “READY” lamp in the cluster will illuminate to indicate the Hybrid System has “started”. When the “READY” lamp is illuminated, your Hybrid vehicle can be driven under electric power even though the internal combustion engine may not be running. 24. Electronic Stabilit[...]
-
Página 34
If this light comes on and remains on while driving, it suggests a potential engine control pr oblem and the need for system service. See your authorized dealer as soon as possible. Although your vehicle will usually be drivable and not need towing, see your authorized dealer for service as soon as possible. CAUTION! • Prolonged driving with the [...]
-
Página 35
reduces fuel ef ficiency and tire tread life, and may af fect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to maintain correct tir e pressure, even if under -inflation has not reached the level to trigger illumination of the TPMS l[...]
-
Página 36
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]
-
Página 37
31. TOW/HAUL The TOW/HAUL button is located at the end of the shift lever . This light will illuminate when the TOW/HAUL button has been selected. Refer to “When T o Use TOW/ HAUL Mode” under “2-Mode Hybrid T ransmission Ranges” in Section 5 of this supplement for further information. 32. Odometer/T rip Odometer Button Press this button to [...]
-
Página 38
HYBRID ENERGY CENTER Hybrid System Operating Conditions The Hybrid System performs various functions depend- ing on the operating condition, such as starting the gas engine, when charging is r equired, etc. The following Hybrid System information screens will be displayed on your vehicle’s MyGIG radio based on the which mode the Hybrid System is [...]
-
Página 39
This screen will display when the vehicle has been started and the Hybrid System is active. This display will appear when the vehicle is slowing down with the gasoline engine running and the high voltage battery is being charged. The engine will be illuminated on the radio screen. Charging — Engine Power System Off UNDERST ANDING YOUR INSTRUMENT [...]
-
Página 40
This display appears when the Hybrid system is off. The engine will not be illuminated on the radio screen. This display appears when the engine is at or near wide open throttle. The engine will be illuminated on the radio screen. Engine Power Battery Power 38 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]
-
Página 41
This display appears when the vehicle is driving in electric mode only . The engine will not be running or illuminated on the radio screen. This display appears when the vehicle is driving in Hybrid mode (both the electric motors and gasoline engine running). The engine will be illuminated on the radio screen. Engine And Battery Power Charging Batt[...]
-
Página 42
This display appears when the high voltage battery is being charged during braking or coasting down and the engine is not running. The engine will not be illuminated on the radio screen. This display appears when the high voltage battery is being charged during braking or coasting down and the engine is running. The engine will be illuminated on th[...]
-
Página 43
This display appears when the engine is idling and the high voltage battery is charging. The engine will be illuminated on the radio screen. This display appears when the vehicle is operating in Hybrid mode and the Multi-Displacement System (MDS) is active. Half of the engine will appear illuminated on the radio screen. Refer to “Multi-Displaceme[...]
-
Página 44
CLIMA TE CONTROLS Automatic T emperature Control (A TC) The control can be turned on by pr essing the power knob. When the control is turned on, it will be in the last mode prior to being turned off. Pr essing the power knob a second time will turn off the contr ol. The control can also be turned on by pressing any button and it will display the co[...]
-
Página 45
Automatic Control The A TC system can maintain a steady comfort level in various weather conditions with a simple operation: • Select your desired temperatur e setting by pressing the + or - side of the T emp rocker switches. A digital temperature setting for driver and passenger will be displayed. The A TC system uses an infrared sensor located [...]
-
Página 46
Level Of Automatic Control 72°F (22°C) is the recommended setting for maximum comfort for the average person, however , this may vary . NOTE: • The temperature setting can be adjusted at any time without affecting automatic contr ol operation. It is not necessary to move the temperature setting for cold or hot vehicles. The system automatically[...]
-
Página 47
temperature is adjusted automatically to maintain the desired comfort level. Y ou can adjust the temperature by pressing the + or - T emp rocker switches. F AN Control Use this knob to regulate the amount of air deliver ed through the system in any mode you select. Rotation of the knob to increase (clockwise) or decr ease (counter- clockwise) fan s[...]
-
Página 48
Manual control of r ecirculation is possible only in Panel, Floor , and Bi-Level modes. It will not operate in Mix, or Defrost modes. The r ecirculation symbol will flash three times indicating recir culation is not available in these modes. NOTE: If the interior of the windows begin to fog, press the RECIRCULA TE button to return to outside air . [...]
-
Página 49
Defrost Outside air is directed to the windshield thr ough the defroster outlet located at the base of the windshield and side window demist outlets. NOTE: The air conditioning compressor operates in both Mix and Defrost or a blend of these modes, even if the A/C snowflake button has not been pressed. This dehumidifies the air to help dry the winds[...]
-
Página 50
AUTO REAR This mode places the rear system in automatic tempera- ture contr ol. Rear temperature can be set as desired (72°F [22°C] recommended for average person) and will be displayed digitally on the front contr ol when in rear mode. Rear W indow Defrosting and Rear Window W asher/Wiper Refer to “Rear W indow Features” in Section 4 of the [...]
-
Página 51
The rear compartment contr ol uses two rotary knobs: one for the temperature contr ol and the other for the fan speed control. The mode for the r ear air conditioning and heating system is always controlled by the fr ont control unit. Fan and temperature can be contr olled from the front contr ol unit or the rear control unit. Rear Rotary Blower Co[...]
-
Página 52
NOTE: For best operation, make sure that ventilation grilles located in the rear storage ar ea are not obstructed by stowed articles. Front Unit to Rear Unit Chart If the Front Control is selected Rear Airflow will come from Panel Headliner Bi-Level Headliner Floor Floor Mix Floor Defrost Floor Operating Tips Fast Cooldown It is recommended to use [...]
-
Página 53
press the Snowflake button to turn on the air condition- ing, and drive with the windows open for the first few minutes. Once the hot air has been expelled, close the windows and set the mode selector to the Recirculation panel or Recirculation Bi-level position. When a comfort- able condition has been reached, choose a mode position and adjust the[...]
-
Página 54
W inter Operation When operating the system during the W inter months, make sure the air intake, located dir ectly in front of the windshield, is free of ice, slush, snow , or other obstruc- tions. This will also prevent snow ingestion into the ducts. 52 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]
-
Página 55
Operating Tips Chart Operating T ips UNDERST ANDING YOUR INSTRUMENT P ANEL 53 4[...]
-
Página 56
[...]
-
Página 57
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 5 6 ▫ Starting ............................ 5 6 䡵 2-Mode Hybrid T ransmission .............. 5 8 ▫ Brake/T ransmission Interlock System ....... 5 8 ▫ 2-Mode Hybrid T ransmission Ranges ....... 5 8 䡵 Four-Wheel Drive Operation .............. 6 2 ▫ MP 3010 ?[...]
-
Página 58
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. NOTE: This vehicle is not compatible with any after- market remote starting systems. The installation of after - market remote starting systems is NOT r ecommended. W ARNING! • Never leave children alone in a ve[...]
-
Página 59
“READY” light is illuminated, your Hybrid vehicle can be driven under electric power even though the internal combustion engine may not be running. If the “READY” light fails to illuminate after you have followed the normal starting procedur e contact your authorized dealer . W ARNING! • Never pour fuel or other flammable liquid into the [...]
-
Página 60
2-MODE HYBRID TRANSMISSION The electronic PRND21 on the instr ument cluster indi- cates the transmission range that has been selected. The shift lever is mounted on the right side of the steering column. T o drive the vehicle, move the shift lever from P ARK or NEUTRAL to the desired drive position. Pull the shift lever toward you when shifting int[...]
-
Página 61
W ARNING! • Y our vehicle could move and injure you and others if it is not completely in P ARK. Check by trying to move the shift lever back and forth without first pulling the shift lever toward you, after you have set it in P ARK. Make sure it is in P ARK before leaving the vehicle. • Never use P ARK position on an automatic trans- mission a[...]
-
Página 62
NOTE: T owing the vehicle (except as specified under “T owing A Disabled V ehicle”), coasting, or otherwise driving the vehicle while in NEUTRAL can cause severe transmission damage. DRIVE For most city and highway driving. This is the preferr ed operating mode for this vehicle. The best fuel economy is achieved by operating the vehicle in DRIV[...]
-
Página 63
• the transmission has reached normal operating tem- perature. • the high voltage battery has reached normal operating temperature. • a sufficient state of char ge in the high voltage battery . NOTE: • If the vehicle is started in extremely cold temperatur es, the 2-Mode Hybrid T ransmission will automatically select the most desirable gear[...]
-
Página 64
When operating in TOW/HAUL mode, the 2-Mode Hybrid T ransmission will select gear ratios that maxi- mize towing power , with less emphasis on fuel economy . NOTE: Electric only mode and engine stop-start are disabled then TOW/HAUL is activated. The TOW/HAUL light will illuminate in the instrument cluster to indicate when the switch has been activat[...]
-
Página 65
W ARNING! Always engage the parking brake when powering down the vehicle if the ⴖ SVC 4WD ⴖ light is illumi- nated. Not engaging the parking brake may allow the vehicle to roll, which may cause personal injury . POWER STEERING Y our vehicle is equipped with an electro-hydraulic power steering system that will give you good vehicle response and [...]
-
Página 66
Upon initial start-up in cold weather , the power steering pump may make noise for a short period of time. This noise should be considered normal, and does not in any way damage the steering system. W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as[...]
-
Página 67
system will release brake pr essure in proportion to amount of throttle applied as the vehicle starts to move in the intended direction of travel. HSA Activation The following must be met in order for HSA to activate: • V ehicle must be stopped. • V ehicle must be on a 8% grade or greater hill. • Gear selection matches vehicle uphill directio[...]
-
Página 68
W ARNING! • If you use a trailer brake controller with your trailer , your trailer brakes may be activated and deactivated with the brake switch. If so, when the brake pedal is released there may not be enough brake pressure to hold the vehicle and trailer on a hill and this could cause a collision with another vehicle or object behind you. In or[...]
-
Página 69
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Jacking Instructions ..................... 6 8 ▫ Jack Location ........................ 6 8 ▫ Removing The Spare T ire ................ 6 9 ▫ T ire Changing Pr ocedure ................ 7 0 䡵 Jump-Starting Procedur es ................. 7 7 ▫ Charge Assist Procedur e — High V oltage Battery .......[...]
-
Página 70
JACKING INSTRUCTIONS W ARNING! • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never put any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service [...]
-
Página 71
Removing The Spare Tire The spare tir e on your vehicle is located underneath the vehicle in the rear . Remove the spare tir e before attempting to jack the vehicle. 1. Remove the rubber plug from the floor in the car go area. 2. Engage the jack wrench extension to the spar e tire winch through the hole in the floor . Spare T ire Location Spare T i[...]
-
Página 72
3. T urn the wrench counterclockwise to lower the spar e tire. Continue to turn the wr ench until the spare tire can be pulled out from under the vehicle. It is recommended that you stow the flat tir e or spare to avoid tangling the loose cable. CAUTION! The winch mechanism is designed for use with the jack extension tube only . Use of an air wrenc[...]
-
Página 73
Preparations 1. Park the vehicle on a firm level surface. A void ice or slippery areas. W ARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough of f the road to avoid the danger of being hit when operating the jack or changing the wheel. 2. Set the parking brake. 3. Place the shift lever in P AR[...]
-
Página 74
Instructions W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Set the parking brake firmly and set [...]
-
Página 75
2. Using the wheel wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground. 3. When changing a front wheel, place the jack under the frame rail behind the wheel. Locate the jack as far forward as possible on the straight part of the frame (prior to inboard transition). Opera[...]
-
Página 76
When changing a rear wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the rear . Connect the jack tube extension and wheel wrench. Before raising the wheel off the ground, make sure that the jack will not[...]
-
Página 77
W ARNING! Raising the vehicle higher than necessary can make the vehicle unstable and cause an accident. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts and pull the wheel off. Install the spare wheel and wheel nuts with the cone shaped end of the nuts toward the wheel.[...]
-
Página 78
W ARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from the edge of the roadway as possible before raising the vehicle. • Block the wheel diagonally opposite the wheel to be raised. • Apply the parking brake firmly before jacking. •[...]
-
Página 79
JUMP-ST ARTING PROCEDURES Y our Hybrid vehicle is equipped with both a 12-V olt battery and a high voltage battery . Either battery may become discharged and cause a no crank condition as a result of low voltage. If the 12-V olt battery’s state of charge is to low and the engine will not crank, the 12-V olt battery light located in the cluster ma[...]
-
Página 80
This message indicates that the vehicle is in “Charge Assist” mode, and can be charged by following the “Charge Assist” procedure. NOTE: • Depending on the high voltage battery’s state of charge, it may take up to 60 minutes for the system to become adequately charged to start the engine. • There ar e remote battery posts located unde[...]
-
Página 81
• Depending on the condition of the second running vehicles alternator and the number of accessories operating on both vehicles, it could take up to 60 min- utes to charge the high voltage battery . T o minimize the charging time ensur e that a minimum amount of accessories are being used. Always wear eye protection and r emove all metal jewelry [...]
-
Página 82
5. Connect the negative cable clamp of the 12-V olt bat- tery charger to the r emote negative post located near the driver’s side fender underhood. W ARNING! During cold weather when temperatures are below freezing point, electrolyte in a discharged battery may freeze. Do not attempt jump-starting because the battery could rupture or explode. The[...]
-
Página 83
CAUTION! Charging the high voltage battery at a rate higher then 70 Amps could damage the 12-V olt battery . 7. If the 12-V olt battery charger has been pr operly con- nected and the system determines that the conditions are correct for char ging, the Navigation radio will display a message “CHARGING in Progr ess”. CAUTION! Do not leave the veh[...]
-
Página 84
NOTE: • T o minimize the charging time, it is r ecommended to leave the key in the OFF position while in the “CHARGING in Progr ess” mode, however the key may be turned to the ON/RUN position to use an accessory . • Do not use the accessory mode for a long period of time, since the charging system will not maintain either the 12-V olt or hi[...]
-
Página 85
CAUTION! Be careful of the moving belt and fan blades. 10. Remove the 12-V olt battery charger positive clamp. NOTE: Allow the vehicle to idle for a minimum of 10 minutes before attempting to drive. W ARNING! Any procedure other than above could result in: • Personal injury caused by electrolyte squirting out the battery vent. • Personal injury[...]
-
Página 86
“Charge Assist” can be aborted by the following items: • The key is turned to the ST ART position while the system is being charged. • Incorrect installation of the 12-V olt battery charger . • Poor cable clamp contact. • The Hybrid Control Module determines conditions ar e not suitable for charging. If the “Charge Aborted” message [...]
-
Página 87
2. Park the booster vehicle within cable reach but with- out letting the vehicles touch. Set the parking brake, place the shift lever in P ARK and turn the ignition OFF on both vehicles. 3. T urn OFF heater , radio and all unnecessary electrical loads. 4. Connect one end of a jumper cable to the positive terminal of the booster battery . Connect th[...]
-
Página 88
5. Connect the other cable, first to the negative terminal of the booster battery and then to the engine of the vehicle with the discharged battery . Make sure you have a good contact on the engine. W ARNING! • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explod[...]
-
Página 89
MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 5.7L HEMI V -8 ...... 8 8 䡵 Maintenance Procedur es .................. 8 9 ▫ T raction Power Inverter Module Cooling System ............................. 8 9 ▫ 2-Mode Hybrid T ransmission ............. 9 5 ▫ T ransfer Case (All Wheel Drive) ........... 9 6 ▫ Axles .............[...]
-
Página 90
ENGINE COMP ARTMENT — 5.7L HEMI V -8 1 — T raction Power Inverter Module (TPIM) Coolant Bottle 8 — W asher Fluid Bottle 2 — Air Cleaner Filter 9 — Engine Coolant Bottle 3 — Engine Oil fill 10 — Fuses (Integrated Power Module) 4 — Engine Oil Dipstick 1 1 — Power Steering Fluid 5 — Brake Fluid Reservoir 12 — Remote Jump-Start Po[...]
-
Página 91
MAINTENANCE PROCEDURES W ARNING! Y our vehicle has both a high voltage DC and AC system as well as a 12-V olt system. DC and AC high voltage are both extremely dangerous and can cause severe burns, electric shock, serious injury or even death. In order to avoid personal injuries: • DO NOT TOUCH THE HIGH VOL T AGE CABLES (ORANGE COLORED) AND/OR TH[...]
-
Página 92
T raction Power Inverter Module (TPIM) Cooling System – Coolant Level Check Check the TPIM coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). Check the coolant bottle tubing for brittle rubber , crack- ing, tears, cuts and tightness of the connection at the bottle and radiator . Inspect th[...]
-
Página 93
W ARNING! • The warning graphic that appears on the cooling system pressure cap is a safety precaution for “DO NOT OPEN HOT”. Never add coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do no[...]
-
Página 94
If the coolant (antifreeze) is dirty or contains a consider - able amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals. Pr operly dispose of old coolant (antifreeze) solution. Selection Of Coolant Refer to “Fluids, Lubricants, and Genuine Parts” in this[...]
-
Página 95
Please review these r ecommendations for using Hybrid Organic Additive T echnology (HOA T) coolant (anti- freeze). When adding coolant (antifreeze): • The manufacturer r ecommends using MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology). • Mix a minimum solution of 50% HOA T coolant (anti- fre[...]
-
Página 96
Disposal of Used TPIM Coolant Used ethylene glycol based TPIM coolant (antifreeze) is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by ani- mals or children, do not stor e ethylene glycol based TPIM coolant (antifreeze) in open container[...]
-
Página 97
• Maintain coolant (antifreeze) concentration at 50% HOA T coolant (antifreeze) (minimum) and distilled/ deionized water for proper corr osion protection of your engine which contains aluminum components. • Make sure that the TPIM cooler and coolant r ecovery bottle overflow hoses are not kinked or obstr ucted. • Keep the front of the TPIM co[...]
-
Página 98
use of special dyes to aid in detecting fluid leaks. In addition, avoid using transmission sealers as they may adversely affect seals. T ransfer Case (All Wheel Drive) Inspect the transfer case for fluid leaks. If a fluid leak is evident the transfer case fluid level may be low . Have the transfer case serviced immediately . CAUTION! Damage may res[...]
-
Página 99
Front Axle Front axle fluid level should be 3/4 in (20 mm) +/- 1/8 in (3 mm) below the level of the fill hole. The total lubricant volume is 55 oz (1.6 L). Appearance Care and Protection From Corrosion W ashing • W ash your vehicle regularly . Always wash your ve- hicle in the shade using a mild car wash soap, and rinse the panels completely with[...]
-
Página 100
• A Hybrid vehicle that is in DRIVE with the “READY” light illuminated and gas engine stopped, is NOT a substitute for the NEUTRAL position. The vehicle can creep in DRIVE or REVERSE when the “READY” light is illuminated. CAUTION! Car wash equipment damage, vehicle damage or a potential accident event could result if the car wash facility[...]
-
Página 101
fuse to be disconnected without removing it fr om the fuse block. Pressing the I.O.D. fuse back into the cavity reconnects it. Interior Fuses The fuse block contains blade-type mini-fuses, relays, and circuit br eakers for high-current circuits. It is located in the left kick panel. It is accessible through a snap-in cover . Interior Fuse Location [...]
-
Página 102
Cavity Mini-Fuse/ Color Description F1 15 Amp Blue Mod_Clock;Analog/ Mod_Cluster;Illumination F2 10 Amp Red Sunroof Power Feed F3 10 Amp Red HEV Assy T rans/DTCM/ ESP/ PCM/TPIM/T rans Pump Controller/HV AC AUX Pump/Power Steer- ing Pump/Fuel Pump Re- lay F4 10 Amp Red Sw_Pwr_Mirror/ Mod_W indow_FT_L T/ Mod_W indow_FT_R T F5 (2) 10 Amp Red Airbags ([...]
-
Página 103
F14 10 Amp Red Clockspring/Stop Lamp Switch Relay/TPMS T ran- sponder F15 15 Amp Blue Compass/EVIC Module/ W ireless_SKREEM VT A/ HEV Diagnostic Port F16 20 Amp Y el- low Reconfigurable Power Outlets F17 20 Amp Y el- low Rear Park Assist F18 20 Amp Y el- low Cigar Lighter Ignition F19 Spare Fuse Spare Fuse F20 15 Amp Blue Heating & Air Conditio[...]
-
Página 104
stamped on the inside cover , otherwise the cavity num- ber of each fuse is stamped on the inside cover that corresponds to the following chart. These fuses and relays can be obtained fr om your authorized dealer . Cavity Cartridge Fuse/ Relay Mini- Fuse Description 1 Spare Fuse N/A 2 30 Amp Pink Front W ipers 3 40 Amp Green Electric Brake Feed 4 5[...]
-
Página 105
Cavity Cartridge Fuse/ Relay Mini- Fuse Description 15 60 Amp Y ellow JB Feed (Interior) 16 Spare N/A 17 10 Amp Red TPIM (T raction Power Inverter Module) Pump 18 20 Amp Y ellow Fuel Pump Relay Feed 19 20 Amp Y ellow HGM (Hybrid Gate - way Module) 20 25 Amp Clear Power Inverter 21 30 Amp Green RBS (Regenerative Brake System) Mod- ule Feed 22 20 Amp[...]
-
Página 106
Cavity Cartridge Fuse/ Relay Mini- Fuse Description 32 Micro- Relay Fuel Pump-2 33 Micro- Relay Stop Lamp Switch 34 Spare Micro- Relay N/A 35 Micro- Relay Fuel Pump 36 Spare- Micro- Relay N/A 37 Spare- Micro- Relay N/A 38 20 Amp Y ellow BPCM Fan Cavity Cartridge Fuse/ Relay Mini- Fuse Description 39 10 Amp Red BPCM Logic 40 20 Amp Y ellow ASSY TRAN[...]
-
Página 107
Power Distribution Center 2 Y our vehicle is equipped with a second electrical power distribution center located in the left side of the engine compartment. This center contains maxi fuses and a relay . A description of each fuse and component may be stamped on the inside cover , otherwise the cavity number of each fuse is stamped on the inside cov[...]
-
Página 108
Integrated Power Module An integrated power module is located in the left side of the engine compartment. This center contains cartridge fuses, mini-fuses and re- lays. A description of each fuse and component may be stamped on the inside cover , otherwise the cavity num- ber of each fuse is stamped on the inside cover that corresponds to the follo[...]
-
Página 109
Cav- ity Cartridge Fuse/ Relay Mini-Fuse Description 9 10 Amp Red T railer-T ow Park Lamps 10 10 Amp Red Rt Park Lamps 1 1 Relay Radiator Fan Hi Rly 12 20 Amp Y ellow Front Contr ol Module (FCM) Batt #4 13 20 Amp Y ellow Front Contr ol Module (FCM) Batt #2 14 Spare Spar e 15 20 Amp Y ellow Ft Fog Lamps 16 20 Amp Y ellow Horn Cav- ity Cartridge Fuse[...]
-
Página 110
Cav- ity Cartridge Fuse/ Relay Mini-Fuse Description 25 Relay Ft Fog Lamps Rly 26 Relay Adjustable Pedal Rly 27 30 Amp Green Ignition Off Draw (IOD) #1 28 30 Amp Green Ignition Off Draw (IOD) #2 Cav- ity Cartridge Fuse/ Relay Mini-Fuse Description 29 Spare 30 Spare 108 MAINT AINING YOUR VEHICLE[...]
-
Página 111
FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 27 Gallons 102 Liters Engine Oil with Filter SAE 5W -20, API Certified 7 Quarts 6.6 Liters Cooling System (Includes 2.1 Qts./2 L for Coolant Bottle) 5.7L with Rear Heat (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula) 16.6 Quarts 15.8 Liters TPIM Coolant System 2.3 Quarts 2.2 Liters [...]
-
Página 112
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part TPIM Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Additive T echnology) Engine Oil Filter MOP AR 威 Engine Oil Filter (P/N 04884899AB) or equivalent. Spark Plugs PLZFR5B—13EG (Gap 0.050 in [1.3 mm]) Fuel Selection [...]
-
Página 113
Chassis Component Fluid, Lubricant, or Genuine Part 2-Mode Hybrid T ransmission Dexron 威 VI Automatic T ransmission Fluid T ransfer Case MOP AR 威 A TF+4 Automatic T ransmission Fluid Front Axle SAE 75W -90 Multi-Purpose T ype, GL-5 Gear Lubricant or equivalent Rear Axle SAE 75W -90 Multi-Purpose T ype, GL-5 Gear Lubricant or equivalent Brake Ma[...]
-
Página 114
[...]
-
Página 115
MAINTENANCE SCHEDULES CONTENTS 䡵 Maintenance Schedule .................. 1 1 4 ▫ Required Maintenance Intervals .......... 1 1 5 8[...]
-
Página 116
MAINTENANCE SCHEDULE The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. On Electronic V ehicle Information Center (EVIC) equipped vehicle’s “Oil Change Required” will be dis- played in the EVIC and a single chime will sound, indicating that an oil change is necessary . On non-EVI[...]
-
Página 117
At Each Stop for Fuel • Check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accuracy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark. • Check the windshield washer solvent and add if requir ed[...]
-
Página 118
6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]
-
Página 119
18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid; change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler De[...]
-
Página 120
36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Inspect the f[...]
-
Página 121
54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid; change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler De[...]
-
Página 122
66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]
-
Página 123
78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]
-
Página 124
96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Inspect the [...]
-
Página 125
1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ [...]
-
Página 126
126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the front and rear axle fluid; change if using your vehicle for police, taxi, fleet, off-road or frequent trailer towing. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler[...]
-
Página 127
144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary . ❏ Inspect the brake linings; replace if necessary . ❏ Inspect th[...]
-
Página 128
† This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]
-
Página 129
INDEX 9[...]
-
Página 130
ABS (Anti-Lock Brake System) ............... 2 6 Air Conditioning ......................... 4 2 Air Conditioning, Operating T ips ............. 5 0 Air Filter .............................. 8 8 Airbag ................................ 3 4 Alarm (Security Alarm) .................... 2 5 Antifreeze (Engine Coolant) ................ 1 0 9 Anti-Lock W a[...]
-
Página 131
Climate Control, Rear Zone ................. 4 8 Coolant Pressur e Cap (Radiator Cap) .......... 8 8 Cooling System Coolant Capacity ...................... 1 0 9 Selection of Coolant (Antifreeze) ......... 109,1 10 T emperature Gauge ..................... 2 3 Defroster , W indshield .................... 46,47 Dimmer Switch, Headlight ..............[...]
-
Página 132
Fluid Capacities ......................... 1 0 9 Fluid Level Checks Automatic T ransmission .................. 9 5 T ransfer Case .......................... 9 6 Fluids, Lubricants and Genuine Parts .......... 1 1 0 Four Wheel Drive ........................ 6 2 Operation ............................ 6 2 Front Axle (Differential) ....................[...]
-
Página 133
Interior Fuses ........................... 9 9 Introduction ............................. 4 Jack Operation ........................ 68,70 Jacking Instructions ....................... 7 2 Jump Assist .......................... 16,77 Jump Assist Procedure ................... 16,77 Jump Starting ........................... 1 6 Keys ...................[...]
-
Página 134
Filter ............................... 1 1 0 Recommendation ...................... 1 0 9 V iscosity ............................ 1 0 9 Overdrive .............................. 2 7 Overheating, Engine ...................... 2 5 Power Distribution Center (Fuses) .......... 88,101,105 Outlet (Auxiliary Electrical Outlet) ........... 2 0 Steering .....[...]
-
Página 135
Ti r e s Changing ............................ 6 8 Jacking .............................. 7 0 Pressur e W arning Light .................. 3 2 Spare T ire ............................ 6 9 Wheel Mounting ....................... 7 0 Wheel Nut T orque ...................... 7 5 T owing ................................ 8 6 Disabled V ehicle ............[...]
-
Página 136
INTRODUCTION INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS HYBRID SYSTEM OPERATION Hybrid OperationHybrid Vehicle Operating CharacteristicsDriving T o Achieve Maximum Fuel Economy IMPORTANT HYBRID SYSTEM INFORMA TION Hybrid System Components High Voltage BatteryDisposal of High Voltage BatteryHigh Voltage Battery S[...]
-
Página 137
INST ALLA TION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this vehicle’s electronic system to pr ovide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be observed during installation. The positive power[...]
-
Página 138
Chrysler LLC 81-326-0937 Second Edition Printed in U.S.A. Aspen/Dur ango OWNER’S MANUAL Hybrid Supplement 2009 149032 Aspen-Durango_Supp.qxd:149032cov 6/12/08 8:19 AM Page 1[...]