Dodge 2010 Journey manual

Journey OWNER’ S MANUAL 2010[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 8 9 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with [...]

1 INTRODUCTION 5[...]

W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e Owners Manual, you may miss important information. Observe all W arnings and Cau[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 1 INTRODUCTION 7[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ T ip Start Feature ...................... 1 4 ▫ Removing Key FOB From Ignition ......... 1 4 ▫ Key-In-Ignition Reminder ............... [...]

▫ Using The Panic Alarm ................. 2 3 ▫ Remote Open W indow Featuree ........... 2 3 ▫ Programming Additional T ransmitters ...... 2 3 ▫ T ransmitter Battery Replacement .......... 2 4 ▫ General Information ................... 2 5 䡵 Remote Starting System — If Equipped ....... 2 5 ▫ How T o Use Remote Start ............... 2[...]

▫ Seat Belts And Pregnant W omen .......... 5 3 ▫ Seat Belt Extender ..................... 5 3 ▫ Supplemental Restraint System (SRS) — Airbags ............................ 5 4 ▫ Advanced Front Airbag Features .......... 5 6 ▫ Airbag Deployment Sensors And Controls . . . 61 ▫ Event Data Recorder (EDR) .............. 6 9 ▫ Child Restr[...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The W ireless Ignition Node (WIN)[...]

Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. Y ou can keep the emer gency key with you when valet parking. T o[...]

Tip Start Feature Do not press the accelerator . Use the Key Fob to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the k[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is LOCK or ACC, a chime will sound to remind you to r emove the key . NOTE: Th[...]

If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electr onics. Should this occur , have the vehicle serviced as soon as possible by an authorized dealer . NOTE: The Sentry Key 威 Immobilizer system is not compatible with aftermarket rem[...]

Customer Key Programming Programming Key Fobs or RKE transmitters may be performed at an authorized dealer . General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must acc[...]

3. Close all doors. The V ehicle Security Light in the instrument cluster will flash to signal that the system is arming. During this period, opening any door or the liftgate will cancel the arming process. NOTE: For added security , whenever the Security Alarm is armed, the HomeLink 威 /Garage Door Opener (if equipped) is disabled as well. T o Di[...]

This feature also turns on the appr oach lighting (if equipped). Refer to “Electronic V ehicle Information Cen- ter (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understanding Y our Instrument Panel” for further information. The interior lights will fade to off after appr oximately 30 seconds or they will immediately fade [...]

T o Unlock the Doors and Liftgate Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors F[...]

Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This feature can be turned on or turned of f. T o change the current setting, pr oceed as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center [...]

Information Center (EVIC)/Personal Settings (Customer- Programmable Featur es)” in “Understanding Y our In- strument Panel” for further information. T o Lock the Doors and Liftgate Press and r elease the LOCK button on the RKE transmit- ter to lock all doors and liftgate. The turn signal lights will flash and the horn will chirp to acknowledg[...]

Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. Using the Panic Alarm T o turn the Panic Alarm featur e ON or OFF , press and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights a[...]

T ransmitter Battery Replacement The recommended r eplacement battery is one CR2032 battery . NOTE: • Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. Battery access is through a door located o[...]

3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, includi[...]

• Hood closed • Liftgate closed • HAZARD switch off • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed fr om ignition switch • Battery at an acceptable charge level, and • RKE P ANIC button not pressed. W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mo[...]

• For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter . However , the ignition switch must be cycled to the ON position before you can r epeat the start sequence for a t[...]

DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock the front doors, pull the inside door handle to the first detent. T o unlock the rear doors, pull the door lock plunger on the door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock.[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Unsuper- vised use of vehicle equipment may cause severe personal injuries and death. • Nev[...]

T o prevent you from locking your Key Fob in the vehicle, the power door lock switch will not operate when the Key Fob is in the ignition and either front door is open. A chime will sound as a reminder to r emove the Key Fob. Automatic Door Locks — If Equipped The auto door lock feature can be enabled or disabled by your authorized dealer . See y[...]

5. The doors were not previously unlocked 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable [...]

Child Protection Door Lock System (Rear Doors) T o provide a safer environment for small childr en riding in the rear seats, the r ear doors are equipped with a Child Protection Door Lock system. T o Engage the Child Protection Door Lock System 1. Open the rear door . 2. Insert the tip of the emergency key (or alike) into the child lock control and[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Failure to follow this warning may result in serious injury or death. NOTE: • After engaging the Child Protection Door Lock sys- tem, always test the door from the inside to ma[...]

3. Repeat Steps 1 and 2 for the opposite rear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door trim panel control all of the door windows. There ar e single window controls on each[...]

NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Open- ing either front door will cancel this featur e. • For vehicles equipped with the EVIC, the power window switches will remain active[...]

Auto-Up Feature with Anti-Pinch Protection — If Equipped On some models, the driver’s and front passenger’s power window switch has an Auto-up featur e. Pull the window switch up to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the Auto-up operation, push down on the[...]

position). T o enable the window controls, press and release the window lockout button again (setting it in the up position). Reset It may be necessary at some point in time to reactivate the Auto-up/Auto-down feature. T o do so, perform the following steps: 1. Pull the window switch up to close window com- pletely and continue to hold the switch u[...]

the rear windows open, then open the fr ont and rear windows together to minimize the buffeting. If the buffeting occurs with the sunr oof open, adjust the sun- roof opening to minimize the buf feting or open any window . LIFTGA TE The liftgate can be unlocked or locked with the Remote Keyless Entry (RKE) transmitter or by activating the power door[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. These fumes could injure you and your passengers. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate contro[...]

• All seat belt systems (except the driver ’s) include Automatic Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to r estrain a child seat or secure a lar ge item in a seat — if equipped If you will be carrying children too small [...]

Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thr own from the vehicle. Seat belts r educe the possibility of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at[...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bones will [...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job properly . In a collision, it could even cut into you. Be sure the[...]

depress the button above the webbing to r elease the anchorage, then move it up or down to the position that fits you best. As a guide, if you are shorter than average you will prefer a lower position and if you ar e taller than average you will prefer a higher position. When you r elease the anchorage try to move it up and down to make sure that i[...]

4. Continue to slide the latch plate up until it clears the folded webbing. Automatic Locking Retractors (ALR) Mode — If Equipped In this mode, the shoulder belt is automatically pre- locked. The belt will still retract to r emove any slack in the shoulder belt. The Automatic Locking Mode is avail- able on all passenger-seating positions with a c[...]

NOTE: These devices are not a substitute for pr oper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly . The pretensioners ar e triggered by the Occupant Re- straint Controller (ORC). Like the airbags, the pr etension- ers are single use items. A deployed pretensioner or a deployed airbag, must be [...]

CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision. NOTE: For more information on pr operly adjusting and positioning the head restraint, r efer to “Adjusti[...]

1. Grasp the deployed AHR fr om the rear seat. 2. Position the hands on the top of the deployed AHR at a comfortable position. 3. Pull down then rearward towards the r ear of the vehicle then down to engage the locking mechanism. Hand Positioning Points On AHR 1 — Downward Movement 2 — Rearward Movement 50 THINGS TO KNOW BEFORE ST ARTING YOUR V[...]

4. The AHR fr ont soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have difficulties or pr oblems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer . 3 — Final Downward Movemen[...]

Enhanced Seat Belt Use Reminder System (BeltAlert 姞 ) If the driver ’s or front passenger ’s (if equipped with belt alert) seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert 威 ) will alert the driver or front passenger to b[...]

2. T urn the ignition switch to the ON position, (do not start the engine). W ait for the Seat Belt Reminder Light to turn off and then pr oceed to the next step. 3. Unbuckle the driver’s seat belt, allow the seat belt to retract, and then r e-buckle the driver’s seat belt at least three times, ending with the seat belt buckled. NOTE: W atch fo[...]

extender should be used only if the existing belt is not long enough. When it is not requir ed, remove the ex- tender and store it. W ARNING! Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug and in the recommended seating posi- tion[...]

The Advanced Fr ont Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position[...]

• Instrument Panel • Knee Impact Bolster • Driver Advanced Front Airbag • Passenger Advanced Front Airbag • Supplemental Seat-Mounted Side Airbags (SAB) • Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pr etensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors ?[...]

W ARNING! (Continued) • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured because the airbags may no longer be functional. The protective covers for the airbag cushions are designed to open only when the airbags are inflat- ing. • Do not drill, cut or tampe[...]

deploys independently , that is a left side impact deploys the left airbag only and a right-side impact deploys only the right airbag. Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may offer side-impact and vehicle r ollover protection to fr ont and rear seat outboar d occupants in addition to that provided by th[...]

The system includes side impact sensors adjacent to both front and r ear seat occupants that are calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection. W ARNING! • If your vehicle is equipped with left and right Supplemental Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up hig[...]

W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion. Children that ar e not big enough to wear the vehicle seat belt properly (see Section on Child Restraints) should be secured i[...]

If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are pr ovided under ⬙ If Y ou Need Assistance ⬙ . W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In[...]

ORC deploys the Advanced Fr ont Airbags, SABIC air- bags — if equipped, Supplemental Seat-Mounted Side Airbags — if equipped, and front seat belt pr etensioners — if equipped, as requir ed, depending on the severity and type of impact. Advanced Front Airbags ar e designed to provide addi- tional protection by supplementing the seat belts in c[...]

in the ACC position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the ORC turns on the Airbag W arning Light in the instrument panel for appr oxi- ma[...]

separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and fr ont passenger . The Advanced Front Airbag gas is vented through the vent holes [...]

deploy the SABIC airbags, depending on the severity and type of collision. In these events, the ORC will deploy the SABIC only on the impact side of the vehicle. A quantity of non-toxic gas is generated to inflate the side curtain airbag. The inflating side curtain airbag pushes the outside edge of the headliner out of the way and covers the window[...]

• T urn on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlock the doors automatically . If a Deployment Occurs The front airbags ar e designed to deflate immediately after deployment. NOTE: Front and/or side airbags will not deploy in all collisions. This does not mean something [...]

Do not drive your vehicle after the airbags have de- ployed. If you are involved in another collision, the airbags will not be in place to protect you. W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly replac[...]

W ARNING! (Continued) • Do not attempt to modify any part of your ad- vanced airbag system. The airbag may inflate accidentally or may not function properly if modi- fications are made. T ake your vehicle to an autho- rized dealer for any advanced airbag system ser- vice. If your seat, including your trim cover and cushion, needs to be serviced i[...]

check the fuse block for blown fuses. Refer to the label located on the inside of the fuse block cover for the proper airbag fuses. See your authorized dealer if the fuse is good. Event Data Recorder (EDR) In the event of a collision, your vehicle is designed to recor d up to five seconds of specific vehicle data param- eters (see list below) in an[...]

In the event that an investigation is undertaken by Chrysler Group LLC (r egardless of initiative), the com- pany or its designated repr esentative will first obtain permission of the appropriate custodial entity for the vehicle (usually the vehicle owner or lessee) before accessing the electronic data stor ed, unless order ed to image the data by [...]

• Pedal position • And other parameters depending on vehicle configuration Child Restraints Everyone in your vehicle needs to be buckled up all the time, including babies and children. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be pros[...]

Infants and Child Restraints • Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing, infant carriers and convertible child seats. • The infant carrier is only used rearwar d-facing in the veh[...]

the vehicle’s seat belts properly . If the child cannot sit with knees bent over the vehicle’s seat cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt. Integrated Child Booster Seat — If Equippe[...]

3. Lift the seat cushion up and push back to lock it in the booster seat position. 4. Place the child upright in the seat with their back firmly against the seatback. 5. Grasp the latch plate and pull out the seat belt. 6. Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around the child’s lap. NOTE: The lap p[...]

8. T o remove the slack fr om the lap belt, pull upward on the shoulder portion of the seat belt. 9. T o release the seat belt, push the r ed button on the buckle. W ARNING! Be certain that the seat cushion is locked securely into position before using the seat. Otherwise, the seat will not provide the proper stability for child seats and/or passen[...]

W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer’s directions ex- actly when installing an infant or child restraint. • A rearward-facing child restraint should only be used in a rear seat. A rearward-f[...]

LA TCH — Child Seat Anchor System (Lower Anchors and T ether for CHildren) Y our vehicle’s second row passenger seats are equipped with the child restraint anchor system called LA TCH. The LA TCH system provides for the installation of the child restraint without using the vehicle’s seat belts, instead securing the child restraint using lower[...]

All three second-r ow passenger seating positions have lower anchors that are capable of accommodating LA TCH-compatible child seats. Y ou should NEVER in- stall LA TCH-compatible child seats so that two seats share a common lower anchorage. If installing child seats in adjacent seating positions, or if your child restraints are not LA TCH-compatib[...]

Installing the LA TCH-Compatible Child Restraint System W e urge you to follow the manufacturer’s dir ections carefully when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that are pr ovided with the child restraint system. NOTE: When i[...]

hook for attachment to the tether strap anchor and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchors. Next, attach the lower hooks or connectors over the top of the seatcover material. Then [...]

W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing Child Restraints Using the V ehicle Seat Belt The seat belts in the pas[...]

T o attach a child restraint tether strap: • Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat, preferably between the head r estraint posts underneath the head restraint. • If necessary , move the seat forward to provide better access to the tether anchor . • Attach the tether strap h[...]

NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ra[...]

A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the br eak-in and not inter- preted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • Do not leave children or animals inside p[...]

W ARNING! (Continued) • On seven passenger models, do not allow a pas- senger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. Exhaust Gas W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide [...]

damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil[...]

they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place [...]

W ARNING! (Continued) Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle. Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 9 4 ▫ Inside Day/Night Mirror ................ 9 4 ▫ Automatic Dimming Mirror — If Equipped . . . 95 ▫ Outside Mirrors ...................... 9 5 ▫ Outside Mirrors Folding Featur e — If Equipped ........................... 9 6 ▫ Power Mirr[...]

▫ Power Seat — If Equipped .............. 1 0 4 ▫ Adjusting Active Head Restraints ......... 1 0 5 ▫ Second Row Passenger Seats ............ 1 0 8 ▫ Third Row Passenger Seats — Seven Passenger Models .................... 1 0 8 ▫ Heated Seats — If Equipped ............ 1 0 8 ▫ 60/40 Split Second-Row Passenger Seats .... 1 0 9 ▫ 5[...]

▫ Battery Saver Feature ................. 1 2 8 ▫ Cargo Light ........................ 1 2 8 䡵 W indshield W ipers And W ashers .......... 1 2 8 ▫ W indshield W iper Operation ............ 1 2 9 ▫ Intermittent W iper System .............. 1 3 0 ▫ W indshield W ashers .................. 1 3 1 ▫ Mist Feature ........................ 1 3[...]

▫ Power Sunroof Switch — If Equipped ...... 1 4 0 䡵 Garage Door Opener — If Equipped ........ 1 4 0 ▫ Programming HomeLink 威 .............. 1 4 2 ▫ Gate Operator/Canadian Programming .... 1 4 4 ▫ Using HomeLink 威 ................... 1 4 5 ▫ Reprogramming A Single HomeLink 威 Button ............................ 1 4 5 ▫ Securit[...]

䡵 Storage ............................. 1 5 8 ▫ Instrument Panel Storage Compartment — If Equipped ........................ 1 5 8 ▫ Console Storage ..................... 1 5 8 ▫ Flip ’n Stow™ Front Passenger Seat Storage — If Equipped ...................... 1 6 0 ▫ Second-Row Passenger Seat T emporary Storage Bin .................[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle). The mirr or should be adjusted while s[...]

Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the featur e on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror durin[...]

W ARNING! V ehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger sid[...]

Models without Express W indow Featur e Press the mirr or select button marked L (left) or R (right) and then press one of the four arr ow buttons to move the mirror in the dir ection the arrow is pointing. Models with Express W indow Featur e Press and r elease the mirror select button marked L (left) or R (right) and then press one of the four ar[...]

Sun V isor “Slide-On Rod” Feature — If Equipped This feature allows for additional flexibility in position- ing the visor to block out the sun. 1. Fold down the sun visor . 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirr or to extend it. Uconnect™ Phone — IF EQUIPPED Refer to “Uconnect™ [...]

Manual Front Seat Adjustments The manual seat adjustment bar is at the front of the seat, near the floor . Pull the bar upward to move the seat forward or r earward. Release the bar once the seat is in the position desired. Using body pr essure, move forwar d and rearwar d on the seat to be sure that the seat adjusters have latched. W ARNING! Adjus[...]

Recliner Adjustment The control lever is on the outboar d side of the seat. T o recline the seat, lean forwar d slightly , lift the lever , lean back to the desired position and r elease the lever . T o return the seatback to its normal upright position, lean forward and lift the lever . Release the lever once the seatback is in the upright positio[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

Driver’s Seat Height Adjustment — If Equipped The control lever is located on the outboar d side of the seat. Raise the lever to raise the seat. Lower the lever to lower the seat. The total seat travel is approximately 2.15 in (55 mm). Fold Flat Front Passenger Seat — If Equipped This feature allows for extended car go space. When the seat is[...]

Pull upward on the lever to fold or unfold the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. Adjust any seat only while the vehicle is parked. Fold-Flat Seat Seatback Release 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 103[...]

Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor . Use this switch to move the seat up, down, forward, r earward or to tilt the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adju[...]

Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear . T o raise the head restraint, pull upward on the head restraint (on some models, you may need to pr ess the push but[...]

For comfort the Active Head Restraints can be tilted forward and backwar d. T o tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push r earward on the bottom of the head restraint to move the head r estraint away from your head. NOTE: • The head restraints should only be r emoved by quali-[...]

• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Y our V ehicle” for further information. W ARNING! • Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the eve[...]

Second Row Passenger Seats These head restraints ar e non-adjustable and non-removable. Third Row Passenger Seats — Seven Passenger Models These head restraints ar e non-adjustable and non- removable. However , you can fold them forward when they are not in use by passengers. Refer to “50/50 Split Third-Row Passenger Seats with Fold-Flat Featur[...]

indicator light off after an additional 30 minutes of continuous operation. If Low-level heating is selected, the system automatically turns the heater and the indi- cator light off after appr oximately 30 minutes of continu- ous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. W ARNING! • Persons wh[...]

NOTE: Prior to folding the second-row passenger seat, make sure the fr ont seatback is not in a reclined position. This will allow the seat to fold easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed[...]

2. Place one hand on the seatback and apply a gentle pressur e. 3. Lift the control lever with the other hand, allow the seatback to move forward slightly , and then release the lever . W ARNING! T o prevent personal injury or damage to objects, keep your head, arms, and objects out of the folding path of the seatback. 4. Gently guide the seatback [...]

Forward and Rearward Adjustment The control lever is on the outboar d side of the seat. Lift the lever to move the seat forward or r earward. Release the lever once the seat is in the position desired. Then, using body pressur e, move forward and r earward on the seat to be sure that the seat adjusters have latched. W ARNING! Adjusting a seat while[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

Seatback/Armrest — Second Row Passenger Seat The latch release-loop is located at the top of the seatback/armrest. Pull the r elease-loop upward to r e- lease the latch and then downward to lower the seatback/armrest. Raise the seatback/armrest and lock it in place when not in use or when additional seating area is r equired. W ARNING! Keep the l[...]

Move the control lever on the upper outboar d side of the seatback forward, and in one fluid motion, the seat cushion flips upward and the seat moves forwar d on its tracks. T ip ’n Slide™ Control Lever T ip n Slide Seat™ 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 15[...]

NOTE: A hand-grip is molded into the front of each quarter trim panel near the door opening to assist entry and exit from the thir d-row passenger seats. W ARNING! Do not drive the vehicle with the seat in this posi- tion, as it is only intended for entering and exiting the third row seats. Failure to follow this warning may result in personal inju[...]

W ARNING! Be certain that the seatback and seat are locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury . 50/50 Split Third-Row Passenger Seats with Fold-Flat Feature — Seven Passenger Models T o provide additional storage[...]

T o Unfold the Seat Grasp the assist strap loop on the seatback and pull it toward you to raise the seatback. Continue to raise the seatback until it locks in place. Raise the head restraint to lock it in place. The seatback can also be locked in a reclined position. T o do so, pull the latch release-loop located at the top of the seatback upward, [...]

W ARNING! (Continued) • Do not allow a passenger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. 1. Pull the hood release lever located unde[...]

2. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood opening. Push the safety latch lever to the right and then raise the hood. Use the hood prop r od to secure the hood in the open position. Place the upper end of the prop r od in the hole on the underside of the hood. Underhood Safety [...]

CAUTION! T o prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both latch[...]

Headlights and Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn the end of the lever to the second detent for headlight operation. Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. T o turn the system on, turn[...]

NOTE: The engine must be running befor e the head- lights will turn on in the automatic mode. Headlights with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the multifunction lever is placed in the AUT O position. In addition, th[...]

If you turn the headlights, or parking lights, or ignition switch ON again, the system will cancel the delay . If you turn the headlights off befor e the ignition, they will turn off in the normal manner . The headlight delay time is programmable on vehicles equipped with the EVIC. Refer to “Electronic V ehicle Information Center (EVIC)/Customer-[...]

Daytime Running Lights — If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at DRL (lower) inten- sity , whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is of f, the turn signal is off, and the shift lever is in any position except P ARK. NOTE: The DRL?[...]

NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the fr ont fog lights. T urn Signals Move the multifunction lever upward or downwar d and the corresponding turn signal indicator on the instr u- ment panel will flash to show proper operation of the front and r ear turn signal[...]

Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn of f. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the lever toward you, to switch the headlights back to low beam. Fla[...]

manually . A courtesy light is also mounted in the head- liner above the second row passenger seats. Pr ess and release the lens to turn ON or turn OFF the light manually . These lights also turn on when you press the UNLOCK button on the RKE transmitter , open a door or the liftgate, or turn the dimmer control completely up- ward to the second det[...]

Windshield Wiper Operation Rotate the end of the lever upward to the LO position for low-speed wiper operation. Rotate the end of the lever upward to the HI position for high-speed wiper operation. NOTE: The wipers will automatically return to the “park” position if you turn OFF the ignition switch while they are operating. The wipers will r es[...]

CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the park position. If the windshield wiper control is turned OFF and the blades cannot return to the park position, damage to the wiper motor may occur . Intermittent Wiper System Use the intermittent wiper system when weather cond[...]

to a maximum of approximately 18 seconds between cycles at vehicle speeds greater than 10 mph (16 km/h). NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield W ashers T o use the washer , pull the windshield wiper/washer control lever towar d you and hold i[...]

Mist Feature Push downward on the windshield wiper/washer con- trol lever to activate a single wipe cycle to clear the windshield of road mist or spray fr om a passing vehicle. The wipers will continue to operate until you release the lever . Headlights With Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlig[...]

TIL T/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. T o unlock the steering column, push the control handle d[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever is located on the right side of the steering wheel. NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designe[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system off when you are not using it. T o Set a Desired Speed When the vehicle reaches the speed desir ed, press down- wa[...]

T o V ary the Speed Setting When the Electronic Speed Contr ol is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping RESUME ACCEL once[...]

W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery . P ARKVIEW 姞 R[...]

CAUTION! (Continued) • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew 威 to be able to stop in time when an obstacle is seen. It is recom- mended that the driver look frequently over his/ her shoulder when using ParkV iew 威 . NOTE: If snow , ice, mud, or anything else builds up on the camera lens, clean the le[...]

4. When the vehicle is shifted into REVERSE, an image of the rear of the vehicle will appear with a caution note to “check entire surr oundings” displayed across the top of the screen. 5. When the vehicle is shifted out of REVERSE, the rear camera mode is exited and the audio screen appears again. OVERHEAD CONSOLE The overhead console contains [...]

Sunglasses Storage T o access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downwar d. Interior Observation Mirror The convex interior observation mirror pr ovides the driver and front seat passenger a wide field of view to conveniently view passengers sitt[...]

NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that ha[...]

Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the handheld transmitter of the device that is being c[...]

• After training a HomeLink 威 channel, if the garage door does not operate with HomeLink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Pr ogramming A Rolling Code System.” 4. Press and hold the just-trained HomeLink 威 button and observe the indi[...]

6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two seconds each time). If th[...]

successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, press and release the pr ogrammed Ho[...]

T roubleshooting Tips If you are having tr ouble programming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for training, and remember to plug it back in? [...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may [...]

Opening Sunroof — Manually Press and hold the switch in the r earward position. Release the switch when the sunroof is in the position desired and it will stop moving. If you continue to hold the switch in the rearwar d position, the sunroof will open fully and then stop automatically . Release the switch once the sunroof stops moving. Opening Su[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof — Express Press and r elease the ⬙ V ⬙[...]

Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power sunroof switch will remain ac[...]

A third fused 12 V olt power outlet is located on the back of the center console. This power outlet has power available when the ignition switch is in the LOCK, ON or ACC position. Front Power Outlets 1 — Switched Power 2 — Battery Power Rear Power Outlet 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 151[...]

A fourth fused 12 V olt power outlet is located on the left quarter trim panel in the cargo ar ea. This power outlet has power available when the ignition switch is in the ON or ACC position. NOTE: • T o ensure proper operation a MOP AR 威 knob and element must be used. • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If[...]

W ARNING! (Continued) • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e., cellular phones, etc.). Event[...]

electronics and other low power devices r equiring power up to 150 W atts. Certain high-end video games, such as Playstation3 and XBox360 will exceed this power limit, as will most power tools. The power inverter is designed with built-in overload protection. If the power rating of 150 W atts is exceeded, the power inverter will automatically shut [...]

Press and r elease the switch once to turn on the power outlet. A status indicator in the switch will illuminate in approximately one second to indicate that power is available at the outlet. Press and r elease the switch again to turn off the power outlet. The status indicator will also turn off. NOTE: Due to built-in overload protection, the powe[...]

CUPHOLDERS There ar e two cupholders, located in the center floor console, for the front passengers. For passengers in the second row ther e are two cuphold- ers, located in the center armrest between the two seats. Center Console Cupholders Armrest Cupholders 156 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

For vehicles equipped with third r ow seating, there ar e additional cupholders located in the trim panels. In addition to cupholders, vehicles may also be equipped with bottle holders. The bottle holders are located on the door trim panels. W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is clos[...]

STORAGE Instrument Panel Storage Compartment — If Equipped Press and r elease the button on the door to open it. The door swings upward to allow easy access to the compart- ment. Console Storage Open storage areas, or cubby bins, ar e located in the floor console and center console. Instrument Panel Storage Compartment Floor Console Cubby Bin 158[...]

There is additional storage under the center console armrest. Pull upwar d on the release lever , located on the front of the lid. NOTE: The sliding armrest (if equipped) must be in the rearwar d position to access the release button on the front of the bin door . Center Console Cubby Bin Center Console Storage Bin 3 UNDERST ANDING THE FEA TURES OF[...]

Flip ’n Stow™ Front Passenger Seat Storage — If Equipped The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback. Pull the loop upward to r elease the latch and then forward to open the seat to the detent position. NOTE: Make sure that objects inside the bin do not interfere with the [...]

Second-Row Passenger Seat T emporary Storage Bin This is a temporary storage bin designed for use when the seatback/armrest is down. Be sur e to remove all items from this bin befor e raising the seatback/armrest. Second-Row Map Pocket and Grocery Retainers — If Equipped A map storage pocket and grocery r etainers are located on the back of the d[...]

In-Floor Storage Bin with Removable Liner NOTE: Position the front seat to at least a mid-track position to provide easier access to the storage bin. An in-floor storage bin is located behind each front seat. Each 1.6 gal (5.9 l) bin can hold up to 12, 12 oz (0.35 l) cans, plus ice, or other items. The removable bin liner allows for easy filling, e[...]

CHILL ZONE 姞 BEVERAGE COOLER STORAGE COMP ARTMENT The Chill Zone 威 Beverage Cooler Storage Compartment can keep chilled beverages cool depending on ambient temperature and climate contr ol setting. Chill Zone 威 is intended for nonperishable beverages only . The Chill Zone 威 compartment is located on the passenger side of the instrument pane[...]

Press and r elease the button on the door to open it. the large door will swing upwar d to allow easy access to the compartment contents. Chill Zone 姞 Beverage Cooler Operation The blower speed setting on the climate control sets the rate at which the air flows into the compartment. The airflow control valve inside the compartment determines how [...]

The compartment cools when the airflow is open, the engine is running and the Air Conditioning (A/C) is on or the Automatic T emperature Control (A TC) system is set for automatic operation (if equipped). This allows you to cool the compartment when the climate control is in the cooling or heating mode. NOTE: Whether operating a Manual Heating and [...]

Cargo Management System Five Passenger System Features • A raised load floor that sits on top of a large built-in storage bin. • A tri-fold door built into the load floor that allows easy access to items in the built-in storage bin. • 60/40 split second-row passenger seats with fold flat feature, which allows for extended car go space. Refer [...]

Cargo T ie-Downs W ARNING! Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. Cargo tie-downs ar e located on both rear trim panels. These tie-downs[...]

W ARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. T o avoid loss of control resulting in per- sonal injury , follow these guidelines for loading your vehicle: • Do not carry loads that exceed the load limits de- scribed on the label attached to the left door or left door cente[...]

The cover , when extended, covers the cargo ar ea to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended cover in place. The cover rolls away neatly inside its housing when not in use. Y ou can also remove the cover from the vehicle to make more r oom in the cargo ar ea. T o install the cover , position[...]

Grab the cover handle and pull it toward you. As the cover nears the liftgate opening, guide the rear attach- ment posts (on both ends of the cover) into the notches in the trim panels. Lower the cover to position the posts into the bottom of the notches and release the handle. W ARNING! A cargo cover that is unsecured in the vehicle could cause in[...]

REAR WINDOW FEA TURES Rear Window Wiper/W asher The rear window wiper/washer contr ol is located on the right side of the steering column. Rotate the switch upward to the “On” position will activate the rear wiper . Rotate the switch upward to the “washer” position will activate that rear washer . The washer pump will continue to operate as[...]

CAUTION! • T urn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper switch is left in the on position. • In cold weather , always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine. If the rear wiper switch is left[...]

CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with w[...]

T o Move the Cross Rails 1. Loosen the knobs on top of each cross rail approxi- mately six turns to disengage the clamp tooth from the side rail. 2. Relocate the cross rails, aligning the cross rail stan- chions (end pieces) with one of the vertical marks on the outboard surface of the side rail for pr oper positioning. There ar e four frontwar d m[...]

• T o help reduce the amount of wind noise when the cross rails ar e not in use, fasten the front cr oss rail in the fourth position from the fr ont and the rear cr oss rail in the eighth position. The tie down holes on the cross rail ends should always be used to tie down the load. Check the straps frequently to be sure that the load r emains se[...]

W ARNING! Cargo must be securely tied before driving your vehicle. Improperly secured loads can fly off the vehicle, particularly at high speeds, resulting in per- sonal injury or property damage. Follow the Roof Rack Cautions when carrying cargo on your roof rack. 176 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 8 1 䡵 Instrument Cluster .................... 1 8 2 䡵 Instrument Cluster Descriptions ........... 1 8 3 䡵 Compass Mini-T rip Computer (CMTC) — If Equipped ............................ 1 9 8 ▫ CMTC Reset Buttons .................. 1 9 8 ▫ Comp[...]

▫ Operating Instructions - Radio Mode ...... 2 1 4 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 222 ▫ Notes On Playing MP3/WMA Files ....... 2 2 4 ▫ List Button (Disc Mode For MP3/WMA Play) .................... 2 2 7 ▫ Info Button (Disc Mode For MP3/WMA Play) ............................. 2 2 7 ?[...]

▫ Operating Instructions — Uconnect™ Phone .................... 2 5 2 ▫ Clock Setting Procedur e ............... 2 5 2 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/REQ/RER/RES/REU/RBZ Radios Only) ......................... 2 5 6 ▫ System Activation .................... 2 5 6 ▫ Electronic Serial Number/Sirius Identif[...]

▫ List Or Browse Mode ................. 2 6 5 䡵 Remote Sound System Controls — If Equipped .......................... 2 6 7 ▫ Right-Hand Switch Functions ............ 2 6 7 ▫ Left-Hand Switch Functions For Radio Operation .......................... 2 6 8 ▫ Left-Hand Switch Functions For Media (i.e., CD) Operation ...................... [...]

INSTRUMENT P ANEL FEA TURES 1 — Side W indow Demist Outlet 5 — Hazard Switch 9 — Climate Control 2 — Air Outlet 6 — Switch Bank 10 — Radio 3 — Instrument Cluster 7 — Beverage Cooler/Storage Compartment* 1 1 — Ignition Switch 4 — Storage Compartment or Remote Display Panel* 8 — Glove Box * If Equipped 4 UNDERST ANDING YOUR INST[...]

INSTRUMENT CLUSTER 182 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Coolant T emperature Gauge The temperature gauge indicates engine coolant tem- perature. Any reading within the normal range indicates that the cooling system is operating satisfactorily . The gauge pointer will likely indicate a high temperature when driving in hot weather , up mountain grades, in heavy traffic, [...]

and idle the vehicle. If the temperature r eading does not return to normal, turn the engine of f immediately and call for service. NOTE: As the coolant temperature gauge appr oaches ⬙ H, ⬙ this indicator will illuminate and a single chime will sound. Further overheating will cause the temperatur e gauge to pass ⬙ H. ⬙ In this case, the ind[...]

7. T urn Signal Indicator Light The left or right arrow will flash in unison with the corresponding fr ont and rear turn signal lights when the turn signal switch is operated. NOTE: • A chime will sound if the vehicle is driven more than 1 mi (1.6 km) with either turn signal on. • Check for an inoperative outside light bulb if either indicator [...]

When blinking: The A WD system is temporarily dis- abled due to overload condition. 12. T achometer This gauge measures engine r evolutions per minute (RPM x 1000). Before the pointer r eaches the red ar ea, ease up on the accelerator to prevent engine damage. 13. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrume[...]

V ehicle Odometer Messages When the appropriate conditions exist, the following messages will display in the odometer: ECO ................... Fuel Saver Indicator Off ECO-on ................. Fuel Saver Indicator On door ............................. Door Ajar gA TE ........................... Liftgate Ajar gASCAP ....................... Fuel Cap [...]

“clicking” sound is heard. Then pr ess the TRIP ODOM- ETER button to turn off the message. If the pr oblem persists, the message will appear the next time the vehicle is started. A loose, impr operly installed, or damaged fuel filler cap may also turn on the MIL. LoW tirE When the appropriate tir e pressur e is low , the odometer display will t[...]

1. T urn the ignition switch to the ON position. (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary , repeat this p[...]

If the light does not turn on during starting, have the system checked by an authorized dealer . If the light turns on and remains on while driving, safely bring the vehicle to a stop and shut off the engine. DO NOT OPERA TE THE VEHICLE UNTIL THE CAUSE IS CORRECTED. This light does not show the quantity of oil in the engine. The engine oil level mu[...]

Resetting the T rip Odometer Display the trip mileage that you want to reset, “T rip A” or “T rip B.” Then push and hold the button (approxi- mately two seconds) until the display resets to 0. The odometer must be in T rip Mode to reset the trip odom- eter . 21. T ire Pressur e Monitoring T elltale Light — If Equipped Each tire, including[...]

Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly . The TPMS malfunction indicator is combined with the low tire pr essure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then r emain continuously illuminated. This se[...]

22. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that[...]

Certain conditions such as a loose or missing gas cap, poor fuel quality , etc., may illuminate the MIL after engine start. The vehicle should be serviced if the MIL stays on through several of your typical driving cycles. In most situations, the vehicle will drive normally and will not requir e towing. CAUTION! Prolonged driving with the MIL on co[...]

Light” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible. W ARNING! If a warning [...]

The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the Brake W arning Light, which will turn on when the brake fluid level in the master cylinder has dropped below a specified level. The light will remain on until[...]

The light also will turn on when the parking brake is applied with the ignition switch in the ON position. NOTE: This light shows only that the parking brake is applied. It does not show the degree of brake application. 27. Airbag W arning Light This light will turn on for four to six seconds as a bulb check when the ignition switch is first turned[...]

COMP ASS MINI-TRIP COMPUTER (CMTC) — IF EQUIPPED NOTE: • The compass on your vehicle is self-calibrating, elimi- nating the need to manually calibrate the compass. • If the vehicle is equipped with a Chrysler 威 gps (Navigation Radio), the NA V system will provide the compass direction, and the variance and calibration menus will be unavaila[...]

When the appropriate conditions exist, the following messages will display: NE ....... Eight-point compass headings are display ed (N, S, E, W , NE, NW , SE, SW) 14°F ............ T emperature (F ahrenheit or Celsius) AV G ....... A v e r a g e Fuel Econom y (English or Metric) DTE ....................... Distance to Empty ET .....................[...]

Compass/T emperature Display Compass V ariance Compass V ariance is the difference between Magnetic North and Geographic North. T o ensure compass accu- racy , the compass variance should be properly set accord- ing to the variance map for the zone where the vehicle will be driven. When properly set, the compass will automatically account for this [...]

reset button (for appr oximately ten seconds) until the current variance zone number is displayed. T o change the zone, press and r elease the CMTC reset button to incr ease the variance one step. Repeat as necessary until the desired variance is achieved. NOTE: The factory default zone is 8. During program- ming, the zone value will wrap around fr[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the instrument cluster below the fuel and temperatur e gauges. V ehicles equipped with steering wheel-mounted buttons are also equipped with the EVIC. The EVIC consists of the fo[...]

Press and r elease this button and the mode displayed will change between Compass/ Outside T emperature, T rip Functions, System Status, and Personal Settings. Press this button to r eset T rip Functions and change Personal Settings. Press this button to scr oll through T rip Func- tions (A verage Fuel Economy , Distance T o Empty [DTE], Elapsed T [...]

Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • T urn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.6 km] with either turn signal on) • Left Front T urn Signal Light Out (with a single chime) • Left Rear T urn Si[...]

• Left Rear Low Pressur e (with a single chime). Refer to information on “T ire Pressur e” and “T ire Pressur e Monitor” in “Starting And Operating”. • Right Front Low Pr essure (with a single chime). Refer to information on “T ire Pressur e” and “T ire Pressur e Monitor” in “Starting And Operating”. • Right Rear Low P[...]

MENU button. T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedur e: 1. T urn the ignition switch to the ON position (Do not start the engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the [...]

and average fuel economy , according to the current fuel tank level. DTE cannot be reset thr ough the RESET button. NOTE: Significant changes in driving style or vehicle loading will greatly af fect the actual drivable distance of the vehicle, regar dless of the DTE displayed value. • When the DTE value is less than 30 miles (48 km) estimated dri[...]

Compass Display / ECO (Fuel Saver Mode) — If Equipped Press and r elease this button to display one of eight compass readings and the outside temperature. The compass readings indicate the dir ection the ve- hicle is facing. NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven severa[...]

Manual Compass Calibration If the compass appears erratic or is inaccurate, you can calibrate the compass manually by performing the fol- lowing steps. 1. T urn the ignition switch ON. 2. Pr ess and release the MENU button until Personal Settings displays in the EVIC. 3. Press the SCROLL button until “CALIBRA TE COM- P ASS” displays in the EVIC[...]

• Magnetic materials should be kept away from the top of the instrument panel, as this is wher e the compass sensor is located. 1. T urn the ignition switch ON. 2. Pr ess and release the MENU button until Personal Settings displays in the EVIC. 3. Press the SCROLL button until “COMP ASS V ARI- ANCE” message and the last variance zone number d[...]

“Language” When in this display you may select one of three lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the RESET button while in this display to select English, French, or Spanish. Then, as you continue, the informa- tion will display in the selected language. NOTE: The [...]

“Flash Lamp W ith Lock” When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the RKE transmitter . This feature may be selected with or without the sound horn on lock feature selected. T o make your selection, press and r elease the RESET button until “ON” or “OFF” appears. “Headl[...]

“ILLUMIN Approach” When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors ar e unlocked with the RKE transmitter . T o make your selec- tion, press and hold the RESET button until “Of f,” “30 sec,” “60 sec,” or “90 sec” appears. Display ECO — If Equipped The “ECO” mess[...]

MEDIA CENTER 230 (REQ) — AM/FM STEREO RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOL[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. SCAN Button P[...]

2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Pr ess the TUNE/SCROLL control knob to save the time change. 5. T o exit, pre[...]

Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treble tones. Push the rotary TUNE/SCROLL control knob a fourth time and BALANCE will display . T urn the TUNE/ SCROLL control knob to the right or left to adjust the sound level from [...]

Program T ype 16-Digit Character Display Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Sof tR&B Sports Sports T alk T alk Program T ype 16-Digit Character Display T [...]

SETUP Button Pressing the SETUP button allows you to select between the following items: NOTE: T urn the TUNE/SCROLL contr ol knob to scroll through the entries. Push the AUDIO/SELECT button to select an entry and make changes. • DVD Enter - When the disc is in DVD Menu mode, selecting DVD Enter will allow you to play the current highlighted sele[...]

• VES™ Lock - Locks out rear VES™ r emote controls (if equipped). • VES™ CH1/CH2 - Allows the user to change the mode of either the IR1 or IR2 wireless headphones by pressing the AUDIO/SELECT button (if equipped). • Set Home Clock - Pressing the SELECT button allows you to set the clock. T urn the TUNE/SCROLL contr ol knob to adjust the[...]

the TUNE/SCROLL control knob to scr oll up and down to select the number and then push to select. Subtitles — If Equipped Selecting this item allows you to choose between subtitle Off or On. Audio DRC — If Equipped Selecting this item allows you to limit maximum audio dynamic range. The default is set to ⬙ High, ⬙ and under this setting, di[...]

Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Pr ess the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM, 12 FM, and 12 Satellite (if equipped) stations to be stored into pushbutton memory[...]

NOTE: The ignition switch must be in the ON or ACC position to operate the radio. LOAD Button — Loading Compact Disc(s) Press the LOAD button and the pushbutton with the corresponding number (1-6) wher e the CD is being loaded. The radio will display PLEASE W AIT and prompt when to INSER T DISC. After the radio displays ⬙ INSER T DISC, ⬙ inse[...]

SCAN Button (CD MODE) Press the SCAN button to scan thr ough each track on the CD currently playing. TIME Button (CD MODE) Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF (CD MODE) Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r el[...]

The radio uses the following limits for file systems: • Maximum number of directory levels: 8 • Maximum number of files: 255 • Maximum number of folders: 100 • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ⬙ . ⬙[...]

MPEG Specification Sampling requency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48 WMA Specification Sampling Frequency (kHz) Bit Rate (kbps) WMA 44.1 and 48 48, 64, 96, 128, 160, 192 VBR ID3 T ag information f[...]

T o increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. T o create a single-session disc, enable the “Disc at Once” option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is d[...]

NOTE: The AUX device must be turned on and the device’s volume set to the proper level. If the AUX audio is not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No functio[...]

Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions - Uconnect™ Multimedia (Satellite Radio) (If Equipped) Refer to “Uconnect™ Multimedia (Satellite Radio)”. Operating Instructions - V ideo Entertainment System (VES)™ (If Eq[...]

MEDIA CENTER 130 (RES) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control kn[...]

to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping, until you release it. TIME Button Press the TIME button to alternate display of the time and radio frequency . Clock Setting Procedure 1. Press and hold the TIME b[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treb[...]

SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commi[...]

If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4-3/4 in (12 cm) discs only . The use of o[...]

the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold the FF (Fast Forwar d) button and the CD player will begin to fast forw[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of di[...]

MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Comman[...]

3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Pr ess the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressin[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a thir d time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the treb[...]

Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Program T ype 16-Digit Character D[...]

SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the[...]

Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode. Operation Instructions — CD MODE for CD and MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC positio[...]

CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (on[...]

R W/FF Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased or R W or another CD button is pressed. The R W (Reverse) button works in a similar manner . AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activa[...]

The radio uses the following limits for file systems: • Maximum number of folder levels: 8 • Maximum number of files: 255 • Maximum number of folders. (The radio display of file names and folder names is limited. For large numbers of files and/or folders, the radio may be unable to display the file name and folder name and will assign a numbe[...]

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. [...]

LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection[...]

TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features If Y our V ehicle”. Operating Instructions - Uconnect™ Multimed[...]

An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the V ideo Entertainment System (VES)™, separate audio outputs allow passengers to listen to the vehicle speakers while differ ent audio tracks play through the system’s wir eless headphones. This means rear[...]

Changing the T ime Zone NOTE: Y ou can skip Steps 2 and 3 by pressing and holding the “TIME” button on the radio for three sec- onds. 1. T urn on the multimedia system. 2. Press and release the “SETUP” button on the radio. 3. If “T ime Setup” is highlighted on the menu, press and release the joystick in the center of the radio. Otherwis[...]

turn the knob surrounding the joystick to select “T ime Setup,” and then press and r elease the joystick. 4. T urn the knob surrounding the joystick to scr oll to “Daylight Savings,” and then press and r elease the joystick. 5. If the desir ed setting has a check mark next to it, proceed to the next step. Otherwise, turn the knob surroundin[...]

6. T urn the knob surrounding the joystick to set the hour highlighted on the clock on the screen. Pr ess and release the joystick when done. 7. T urn the knob surrounding the joystick to select “Set Minutes,” and then press and r elease the joystick. 8. T urn the knob surrounding the joystick to set the minutes highlighted on the clock on the [...]

Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES/REU/RBZ RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, enter[...]

Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER/RBZ Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will dis[...]

• Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. Operating Instructions — Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must [...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the channel. MUSIC TYPE Button — Except REU Radio Pressing this button once will turn [...]

SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription. SET Button – T o Set the Pushbutton Memory When you are r eceiving a channel that you wis[...]

Operating Instructions — Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” Uconnect™ Multimedia (SIRIUS BACKSEA T TV™) — IF EQU[...]

• The LCD Screen swings down fr om the console to allow the rear seat passenger(s) to view the display . • The touch screen radio and DVD player contr ols allow front seat operation for easy setup in the case of younger rear seat passengers. • A battery-power ed infrared r emote control that snaps into a molded compartment in the center conso[...]

UNIVERSAL CONSUMER INTERF ACE (UCI) 0.5 — IF EQUIPPED NOTE: This section is for sales code RES/REL and REQ/RET radios only with uconnect 威 . For sales code RBZ/REN/REZ touch screen radio and REU/REX/RE1 radio, refer to the separate User’s Manual. This feature allows an iPod 威 mobile digital device to be plugged into the vehicle’s sound sy[...]

Play Mode When switched to UCI mode, the iPod 威 automatically starts Play mode. In Play mode, use the following buttons on the radio faceplate to control the iPod 威 and display data: T une/Scroll Knob Use the T une/Scroll knob to go to the next or previous track. The T une/Scroll knob functions similar to the scroll wheel on the iPod 威 mobile[...]

previous track in the list; pr essing this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the INFO button while a track is playing to see the information (T rack T itle, Artist, Album, etc.)[...]

T une/Scroll Knob In the List mode, the T une/Scroll knob functions in a similar manner as the scroll wheel on the iPod 威 . T urning the T une/Scroll knob clockwise (forwar d) and counterclockwise (backwar d) scrolls thr ough lists, dis- playing the track detail on the radio display . Once the track to be played is highlighted on the radio displa[...]

LIST Button Pressing the LIST button will take the iPod 威 to the top level menu. T urn the T une/Scroll knob to list the top menu item to be selected and then press the T une/Scroll knob. This will take jump to the next sub menu list item of the iPod 威 and follow the same steps to go to the desired track in that list. Not all iPod 威 sub menu [...]

Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the curr ent setting. • Press the bottom of the switch to SEEK the next listenable station down from the curr ent setting. • Press the button in the center of the switch to tune to the next preset that you have pr ogrammed.[...]

3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as benzene, thinner , cleaners, or anti-static sprays. 5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high. NOTE: If you experience difficulty in [...]

Manual Heating and Air Conditioning System Blower Control There ar e four blower speeds. Use this control to r egulate the amount of air forced thr ough the system in any mode you select. The blower speed increases as you move the contr ol clockwise from the of f position. NOTE: For vehicles equipped with Remote Start, the climate controls will not[...]

Fabric front fascia pr otectors may reduce airflow to the condenser , reducing air conditioning performance. Mode Control Mode control allows you to choose from several selections of air distribu- tion. Y ou can select either a primary mode, as identified by the symbols, or a blend of two of these modes. The closer the control is to a particular mo[...]

Defrost Mode Air is directed thr ough the windshield and side window demist outlets. Use DEFROST mode with maximum blower and temperature settings for best windshield and side window defrosting. NOTE: The air conditioning compressor operates in MIX and DEFROST , or a blend of these modes even if the A/C button is not pressed. This dehumidifies the [...]

• In order to pr event fogging, when the RECIRCULA- TION button is pressed and the mode contr ol is set to P ANEL, the A/C will engage automatically . • The A/C can be deselected manually without disturb- ing the mode control selection. Economy Mode If ECONOMY mode is desir ed, press the A/C button to turn off the indicator light and the A/C co[...]

Three-Zone Manual Air Conditioning and Heating Systems — If Equipped W ith the Three-Zone T emperature Control System, each front seat occupant can independently contr ol the Heat- ing, V entilation, and Air Conditioning operations coming from the outlets on their side of the vehicle. Three-Zone Manual Climate Control 1 — Left T emperature 7 ?[...]

The Three-Zone T emperature Control bottom panel contr ols rear Heating, V entilation, and Air Conditioning operations. The primary control for the r ear blower is on the front climate control unit located on the instr ument panel. Rear Manual Climate Control (Overhead) The Three-Zone T emperature Control bottom panel has five positions; off, r ear[...]

Rear Blower Control The primary control for the r ear blower is on the front climate control unit, located on the instr ument panel. Only when the front contr ol for the rear blower is in the RR position do the second row seat occupants have control of the r ear blower speed. The rear blower contr ol, located in the rear over head console, has an o[...]

Rear Mode Control Headliner Mode Air comes from the outlets in the headliner . Each of these outlets can be individually adjusted to direct the flow of air . Moving the air vanes of the outlets to one side will shut off the airflow . Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, [...]

The T wo- and Three-Zone A TC System automatically maintain the interior comfort level desired by the driver and all passengers. The system automatically adjusts the air temperature, the airflow volume, amount of outside air recir culation and the airflow direction. This maintains a comfortable temperature, even under changing condi- tions. T wo-Zo[...]

Three-Zone A TC 1 — System On/Off 7 — Front MODE 2 — Left Front T emperature 8 — RECIRCULA TE 3 — Display Screen 9 — Front DEFROST 4 — Right Front T emperature 10 — Front Blower Speed 5 — Air Conditioning (A/C) On/Off 1 1 — SYNC 6 — AUTO Mode / Blower Three-Zone A TC Lower Control Panel 1 — Rear Blower Speed 4 — Rear A TC [...]

Automatic Operation 1. Press the AUT O button on the Front Upper A TC Panel and the word AUTO will illuminate in the fr ont A TC display , along with three temperatures for driver , front passenger , and rear seats. The system will then automati- cally regulate the amount of airflow . 2. Next, adjust the temperature you would like the system to mai[...]

Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the fr ont A TC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other . If any one feature is controlled manually , the temperature doors will continue to ope[...]

Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfort- able, while keeping the windshield clear . Defrost Mode Ai[...]

Recirculation Control When outside air contains smoke, odors, or high humidity , or if rapid cooling is desired, you may wish to recir culate interior air by pressing the RECIRCULA TION mode control button. RECIRCULA TION mode should only be used temporarily . The recirculation symbol will illuminate in the display when this button is selected. Pus[...]

The Three-Zone A TC Climate control is located in the headliner , near the center of the vehicle. The Rear-Zone A TC for the rear passengers is in the overhead console above the second r ow passenger seats. 1. Press the REAR LOCK button on the front lower A TC panel. This turns off the REAR LOCK icon in the r ear temperature knob. 2. Rotate the Rea[...]

NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to pr ovide comfort as quickly as possible. • The temperature can be displayed in English or Metric units by selecting the “Display Units of Measure in” customer-pr ogrammable feature. R[...]

When rear contr ols are locked by the fr ont system, the LOCK symbol on the temperature knob is illuminated and any rear over head adjustments are ignor ed. Rear Mode Control Auto Mode The rear system automatically maintains the corr ect mode and comfort level desired by the r ear seat occu- pants. Headliner Mode Air comes from the outlets in the h[...]

under “Maintenance Procedur es” and to “Fluids, Lubri- cants, and Genuine Parts” in “Maintaining Y our V ehicle” for information pertaining to the cooling system and coolant selection. W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Anyti[...]

Outside Air Intake Make sure the air intake, located dir ectly in front of the windshield, is free of obstr uctions such as leaves. Leaves collected in the air intake may reduce airflow , and if they enter the plenum, they could plug the water drains. In W inter months, make sure the air intake is clear of ice, slush, and snow . A/C Air Filter — [...]

Control Setting Suggestions for V arious W eather Conditions 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 289[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 9 5 ▫ Automatic T ransmission ............... 2 9 5 ▫ Normal Starting (T ip Start) ............. 2 9 6 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............................ 2 9 6 ▫ If Engine Fails T o Start ................ 2 9 6 ▫ After Starti[...]

䡵 All Wheel Drive (A WD) — If Equipped ...... 3 0 7 䡵 Driving On Slippery Surfaces ............. 3 0 7 ▫ Acceleration ........................ 3 0 7 ▫ T raction ........................... 3 0 8 䡵 Driving Through W ater ................. 3 0 8 ▫ Flowing/Rising W ater ................. 3 0 9 䡵 Power Steering ....................... 3[...]

▫ T ire Inflation Pressur es ................ 3 3 6 ▫ Radial-Ply T ires ..................... 3 3 8 ▫ Compact Spare T ire ................... 3 3 8 ▫ T ire Spinning ....................... 3 3 9 ▫ T read W ear Indicators ................. 3 4 0 ▫ Life Of T ire ........................ 3 4 1 ▫ Replacement T ires .................... 3 [...]

䡵 V ehicle Loading ...................... 3 5 9 ▫ V ehicle Certification Label .............. 3 5 9 ▫ Gross V ehicle W eight Rating (GVWR) ...... 3 6 0 ▫ Gross Axle W eight Rating (GA WR) ........ 3 6 0 ▫ Overloading ........................ 3 6 0 ▫ Loading ........................... 3 6 1 䡵 T railer T owing ........................ [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or othe[...]

Normal Starting (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue t[...]

W ARNING! (Continued) • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a dis- charged battery , booster cab[...]

The engine block heater cord is bundled under the hood between the headlight assembly and the T otally Inte- grated Power Module (Fuse Box) on the driver’s side of the vehicle. W ARNING! Remember to disconnect the cord before driving. Damage to the 1 10-1 15 V olt electrical cord could cause electrocution. AUTOMA TIC TRANSMISSION CAUTION! Damage [...]

W ARNING! • It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling no[...]

Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requir es the shift lever to be placed in P ARK prior to rotating the key fob to the LOCK position. The key fob can only be removed fr om the ignition when the ignition is in the LOCK position and once removed the shift lever is locked in P ARK. Brake/T [...]

Automatic T ransmission Ignition Interlock System This system prevents the key fob fr om being removed unless the shift lever is in P ARK. It also prevents shifting out of P ARK unless the ignition switch is in the ON position and the brake pedal is applied. Four-Speed or Six-Speed Automatic T ransmission The electronically contr olled transmission[...]

When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK. As an adde[...]

NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. W ARNING! Do not coast in NEUTRAL and never turn of f the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or[...]

“3” (Drive) — Four-Speed T ransmission This range eliminates shifts into “D” (Overdrive). The transmission will operate normally in first, second, and third gear while in this range. The “3” (Drive) range should also be used when descending steep grades to prevent brake system distr ess. NOTE: Using the “3” (Drive) range while ope[...]

the vehicle to be driven to an authorized dealer for service without damaging the transmission. In the event of a momentary problem, the transmission can be reset to r egain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift into P ARK. 3. T urn the ignition switch to the LOCK position. 4. Restart the engine. 5. Shif[...]

and to the right (+) an upshift. The gear position will display in the instrument cluster on the transmission range indicator . NOTE: In AutoStick 威 mode, the transmission will only shift up or down when the driver moves the shift lever to the right (+) or left (-). AutoStick 威 is deactivated when the shift lever is moved out of the AutoStick ?[...]

− If the system detects powertrain overheating, the transmission will revert to the automatic shift mode and remain in that mode until the powertrain cools of f. − If the system detects a problem, it will disable the AutoStick 威 mode and the transmission will return to the automatic mode until the problem is corr ected. ALL WHEEL DRIVE (A WD)[...]

W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.). T raction When driving on wet or s[...]

Flowing/Rising W ater W ARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly . Failure to follow this warn[...]

CAUTION! • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not con- tinue to operate the vehicl[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical [...]

The foot operated parking brake is located below the lower left corner of the instrument panel. T o apply the park brake, firmly push the park brake pedal fully . T o release the parking brake, pr ess the park brake pedal a second time and let your foot up as you feel the brake disengage. When the parking brake is applied with the ignition switch O[...]

difficult to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave chil[...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. However , there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal for ce requir ed [...]

Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System (ABS)” under “Elec- tronic Brake Contr ol System” in thi[...]

ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system commonly r eferred to as ESP . This system includes Anti-Lock Brake System (ABS), Brake Assist System (BAS), T raction Control System (TCS), Electronic Roll Mitigation (ERM), and Electr onic Stability Program (ESP). These systems work together[...]

These are all normal characteristics of ABS. W ARNING! • The ABS contains sophisticated electronic equip- ment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capa- bility . Installation of such equipment should be pe[...]

Anti-Lock Brake Light The Anti-Lock Brake Light monitors the ABS. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS Light r emains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir [...]

W ARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can preve[...]

driving maneuvers. It cannot prevent wheel lift due to other factors, such as road conditions, leaving the r oad- way , or striking objects or other vehicles. W ARNING! Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all wheel lift or r[...]

ESP/TCS Indicator Light The ESP/TCS Indicator Light located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little [...]

Full On This is the normal operating mode for ESP . Whenever the vehicle is started the system will be in this mode. This mode should be used for most driving situations. ESP should only be turned to “Partial Off” for specific r easons as noted. Refer to “Partial Off” for additional informa- tion. Partial Of f The ESP OFF button is located [...]

ESP/BAS W arning Light and ESP/TCS Indicator Light The malfunction indicator for the ESP is com- bined with the BAS indicator . The ESP/BAS Malfunction Indicator Light and the ESP/TCS Indicator Light in the instrument cluster both turn on when the ignition switch is turned to the ON position. They should both turn off with the engine running. If th[...]

NOTE: The TSC is disabled when the ESP system is in the “Partial Off” mode. W ARNING! • TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to ”V e- hicle Loading” and “T railer T owing” in “Starting and Operating” for further information. • If T[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the side[...]

T ire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm[...]

TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should [...]

T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof. Cold T ire Pressure Cold tir e inflation pr essure is defined as the tir e pressur e after the vehicle has not been driven for at l[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size de[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the T ire and Loading Information placard and in the “V ehicle Loading”[...]

available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer[...]

334 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tir e inflation pressur e is defined as the tire pr [...]

loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure t[...]

Refer to “Freeing A Stuck V ehicle” in “What T o Do In Emergencies” for further information. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more [...]

Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose con[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tir es during the winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire[...]

Refer to “Maintenance Schedule” for the proper mainte- nance intervals. More fr equent rotation is permissible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being performed. The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Mon[...]

The TPMS will warn the driver of a low tire pr essure if the tire pr essure falls below the low-pr essure warning limit for any reason, including low temperatur e effects and natural pressur e loss through the tir e. The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tir [...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause [...]

• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit t[...]

sequence will repeat, pr oviding the system fault still exists. The T ire Pressur e Monitoring T elltale light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPMS sensors. 2. I[...]

T elltale light will turn off, as long as no tire pr essure is below the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Premium System – If Equipped The T ire Pressur e Monitor System (TPMS) uses wir[...]

Should this occur , you should stop as soon as possible and inflate the tires with low pr essure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pr essure value. Once the system r eceives the updated tire pr essures, the system will automatically update, the graphic display in the EVIC will stop flash- ing, and the [...]

If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressur e Monitoring T elltale light will no longer flash, and the ⬙ CHECK TPM SYS- TEM ⬙ message will no longer display , and a pressure value will display in place of the dashes. A system fault [...]

T elltale light will remain on and a chime will sound. In addition, the graphic in the EVIC will still display a flashing pressur e value. 3. After driving the vehicle for up to 20 minutes above 15 mph (25 km/h), the TPMS T elltale light will flash on and off for 75 seconds and then r emain on solid. In addition, the EVIC will display a ⬙ CHECK T[...]

The tire pr essure sensors ar e covered under one of the following licenses: United States ..................... KR5S120123 Canada ........................ 2671-S120123 FUEL REQUIREMENTS 2.4L Engine All engines are designed to meet all emis- sions regulations and pr ovide excellent fuel economy and performance when us- ing high-quality unleaded “[...]

Over 40 auto manufacturers worldwide have issued and endorsed consistent gasoline specifications (the W orld W ide Fuel Charter , WWFC) which define fuel properties necessary to deliver enhanced emissions, performance, and durability for your vehicle. The manufacturer r ecom- mends the use of gasolines that meet the WWFC speci- fications, if they a[...]

MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emission system performance in some vehicles. The man[...]

CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your authorized dealer for service assistance. • The use of fue[...]

W ARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other po[...]

CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. • T o avoid fuel spillage and overfilli[...]

• When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the word “gASCAP” will display in the odometer . If this occurs, tighten the fuel filler cap until a “clicking” sound is hea[...]

• T ype of V ehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the VIN. Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Ratin[...]

Figure out the weight on the fr ont and rear of the vehicle separately . It is important that you distribute the load evenly over the front and r ear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR. Loading T o load your ve[...]

exceed the GVWR. Refer to “V ehicle Loading/V ehicle Certification Label” in “Starting and Operating” for further information. Gross T railer W eight (GTW) The GTW is the weight of the trailer plus the weight of all cargo, consumables, and equipment (permanent or tem- porary) loaded in or on the trailer in its ⬙ loaded and ready for opera[...]

Frontal Area The frontal ar ea is the maximum height multiplied by the maximum width of the front of a trailer . T railer Sway Control – Electronic Refer to “Electronic Brake Contr ol System/T railer Sway Control (TSC)” in “Starting and Operating” for further information. T railer Sway Control – Mechanical The trailer sway control is a [...]

W ARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability , braking performance, and could result in an accident. • W eight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable rec- reational vehicle dealer for additional [...]

W ith W eight-Distributing Hitch (Correct) Improper Adjustment of W eight-Distributing Hitch (Incorrect) 5 ST ARTING AND OPERA TING 365[...]

T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your authorized dealer for package content. The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and shou[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission GCWR (Gross Com - bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 2.4L/Automatic 6,000 lbs (2 722 kg) 22 sq ft (2.0 sq m) 1,000 lbs (454 kg) [...]

Engine/T ransmission GCWR (Gross Com - bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.5L/Automatic (with T railer T ow Prep Package 8,300 lbs (3 765 kg) 40 sq ft (3.7 sq m) 3,500 lbs (1 588 kg) which includes 1 to 2 persons & Luggage 350 lbs (159 kg) 8,300 lbs (3 765 kg) 40 sq ft (3.7 sq m) 3,000 lbs (1 361 kg) [...]

NOTE: • The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight refer enced on the T ire and Loading Information placard. Refer to “T ire Safety Information” in “Starting and Operating” for further information. • * For All Wheel Drive (A WD) models carrying 5[...]

Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. [...]

W ARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to c[...]

W ARNING! (Continued) 3. GA WR 4. T ongue weight rating for the trailer hitch utilized. (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight.) T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e infl[...]

actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired. − T railer brakes are recommended for trailers over 1,000 lbs (454 kg) and requir ed for trailers in excess of 2,000 lbs (907 kg). CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it sh[...]

T owing Requirements – T railer Lights and Wiring Whenever you pull a trailer , regar dless of the trailer size, stoplights and turn signals on the trailer are r equired for motoring safety . The T railer T ow Package may include a four- and seven- pin wiring harness. Use a factory approved trailer har - ness and connector . NOTE: Do not cut or s[...]

T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away fr om heavy traffic. Automatic T ransmission The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, select the “3” range for four-speed automatic or the “5” range for si[...]

“police, taxi, fleet, or frequent trailer towing.” Refer to “Maintenance Schedule” for the proper maintenance intervals. NOTE: Check the four-speed transmission fluid level before towing. The six-speed transmission is sealed and the fluid level cannot be checked. See your authorized dealer for assistance. Electronic Speed Control – If Equ[...]

Cooling System T o reduce potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) T[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 8 0 䡵 If Y our Engine Overheats ................ 3 8 0 䡵 Jacking And T ire Changing ............... 3 8 1 ▫ Jack Location ....................... 3 8 2 ▫ Spare T ire Location ................... 3 8 3 ▫ Preparations For Jacking ............... 3 8 3 ▫ Sp[...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the instrument panel switch bank, above the climate contr ols. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency . Press the switch a second time[...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat. • Y ou can also turn the temperature control to maximum heat, the mode control to floor and the blower[...]

W ARNING! (Continued) • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service center [...]

Spare Tire Location The spare tir e is stowed underneath the rear of the vehicle and is held in place by means of a cable winch mechanism. Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible, avoid icy or slippery areas. W ARNING! Do not attempt to change a tire on the side of the veh[...]

1. Remove the jack-handle components 1, 2 and 3 from storage and assemble them. NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together . Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward [...]

4. T ilt the r etainer at the end of the winch cable and remove it fr om the center of the wheel. Spare Tire Stowage NOTE: On seven-passenger models, fold the third-r ow passenger seats flat. This will provide mor e space when accessing the jacking tools and when operating the winch mechanism. 1. Remove the jack-handle components 1, 2, and 3 from s[...]

NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together . Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward when seated on component 2. This will make it easier to rotate the assembly when[...]

4. T ilt the retainer at the end of the winch cable and dr op it through the center of the wheel. Then place the spar e tire with the cable and r etainer underneath the vehicle. 5. Fit the assembled jack-handle over the winch drive nut. Rotate the jack-handle assembly clockwise to raise the spare tir e into the storage area. Continue to r otate the[...]

W ARNING! (Continued) • Never start or run the engine with the vehicle on a jack. • Do not let anyone sit in the vehicle when it is on a jack. • Do not get under the vehicle when it is on a jack. • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway , be extreme[...]

4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tir e. Minimum tire lift pr ovides maximum stability . Front Jacking Location Rear Jacking Location 6 WHA T TO DO IN EMERGENCIES 389[...]

W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts. For vehicles so equipped, remove the wheel cover fr om the wheel by hand. Do not pry the wheel cover off. Then pull the wheel of f the [...]

W ARNING! T o avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury or death. 8. Lower the vehicle by turning the jack screw counter- clockwise with the jack handle. 9. Finish tightening the wheel nuts. Push down on the[...]

14. Check the tire pressur e as soon as possible. Adjust the tire pr essure as r equired. Wheel Nuts T ighten all wheel nuts occasionally to eliminate the possibility of wheel studs being sheared or the bolt holes in the wheels becoming elongated. This is especially important during the first few hundred miles (kilome- ters) of operation and after [...]

W ARNING! Do not attempt jump-starting if the battery is frozen. It could rupture or explode and cause personal injury . Preparations for Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left fr ont wheel splash shield. T o allow jump-starting there are r emote battery posts located on the left sid[...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure W ARNING! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion. CAUTION! Failure to follow these procedures could result in damage to th[...]

5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery . Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with th[...]

front wheels. Then shift back and forth between RE- VERSE and 1st gear . Using the least accelerator pedal pressur e to maintain the rocking motion without spin- ning the wheels is most effective. NOTE: If your vehicle is equipped with T raction Con- trol, turn the system OFF befor e attempting to “rock” the vehicle. Refer to “Electr onic Sta[...]

TOWING A DISABLED VEHICLE Without The Ignition Key Front Wheel Drive (FWD) Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferr ed towing method. However , if a flatbed towing vehicle is not available, a wheel lift towing vehicle may be used. Furthermore, r ear towing is not reco[...]

CAUTION! (Continued) • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and trans- axle may result. If you must use the accessories (wipers, defrosters, etc.) while being towed, the key[...]

• The distance to be traveled must not exceed 15 miles (25 km). • The towing speed must not exceed 25 mph (40 km/h), and both front and r ear wheels must be on the ground. CAUTION! Exceeding these towing limits may cause a transaxle failure. Such damage is not covered by the New V ehicle Limited W arranty . If the transaxle is not operative, or[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L ............. 4 0 3 䡵 Engine Compartment — 3.5L ............. 4 0 4 䡵 Onboard Diagnostic System — OBD II ...... 4 0 5 ▫ Loose Fuel Filler Cap Message ........... 4 0 5 䡵 Emissions Inspection And Maintenance Programs ............................ 4 0 6 䡵 Replacement Part[...]

▫ Exhaust System ..................... 4 2 1 ▫ Cooling System ..................... 4 2 4 ▫ Brake System ....................... 4 3 0 ▫ Automatic T ransmission ............... 4 3 2 ▫ Appearance Care And Protection Fr om Corrosion .......................... 4 3 5 ▫ Cleaning The Cupholders .............. 4 4 0 䡵 Fuses ................[...]

ENGINE COMP ARTMENT — 2.4L 1 — Engine Coolant Reservoir 7 — T otally Integrated Power Module (TIPM) 2 — Power Steering Fluid Reservoir 8 — Automatic T ransmission Dipstick 3 — Engine Oil Fill 9 — W asher Fluid Reservoir 4 — Brake Fluid Reservoir 10 — Coolant Pressur e Cap 5 — Remote Jump Start (Positive Battery Post) 1 1 — Eng[...]

ENGINE COMP ARTMENT — 3.5L 1 — Engine Coolant Reservoir 6 — T otally Integrated Power Module (TIPM) 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Brake Fluid Reservoir 8 — W asher Fluid Reservoir 4 — Remote Jump Start (Positive Battery Post) 9 — Engine Oil Dipstick 5 — Remote Jump Start (Negative Battery Post) 10[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

A loose, impr operly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of this vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states that requir e an Inspection and Main[...]

the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will r emain fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is ready , and you can proceed to t[...]

NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perfor[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Sc[...]

Engine Oil V iscosity (SAE Grade) – 2.4L Engine SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on the engine oil filler cap location, refer t[...]

Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your authorized dealer , service station, or governmental agency for advice on how and where used oil and oil fi[...]

used to assure most ef ficient service. MOP AR 威 engine air cleaner filters are a high quality filter and ar e recommended. Maintenance-Free Battery Y our vehicle is equipped with a maintenance-free battery . Y ou will never have to add water , nor is periodic main- tenance requir ed. NOTE: The battery is stored in a compartment that is located b[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and are identified on the battery case. Cable clamps should be tight on the terminal posts and free of corros[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to W arranty Information Book, located on t[...]

A/C Air Filter – If Equipped Refer to “Maintenance Schedule” for further information. W ARNING! Do not remove the A/C air filter while the blower is operating or personal injury may result. The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following steps to replace the filter: 1. Open the glove box and re[...]

5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arr ow on the filter pointing toward the floor . When installing the filter cover , make sure the r etaining tabs fully engage the cover . CAUTION! The A/C air filter is labeled with an arrow to indicate airflow direction through the filte[...]

grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure pr oper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a yea[...]

Rear W iper Removal/Installation 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised of f of the liftgate glass. NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first. 2. Lift the rear wiper arm upwar d to raise the wiper blade off of the liftgate glass. 1 — W[...]

3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin fr om the wiper blade holder . 4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place. Adding W asher [...]

T o prevent freeze-up of your windshield washer system in cold weather , select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers. The fluid reservoir will hold nearly 1 gal (4 l) of washer fluid when the message “LoW ASH” appears in the instru[...]

W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO, refer to “Safety T ips/Exhaust Gas” in “Things T o Know Before Starting Y our V ehicle” for further information. • A hot exhaust sy[...]

Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e proper catalyst operation and pr event possible catalyst damage. NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. In [...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you[...]

Cooling System – Drain, Flush and Refill Refer to “Maintenance Schedule” for further information. If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to remove all deposits and chemicals. Pr operly dispose of the old [...]

CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals. This engine [...]

Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area wher e the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifr eeze) and will requir e more fr equent engine co[...]

Disposal of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by ani- mals or children, do not stor e ethylene glycol-based engine coolant (antifreeze) in open containers[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot engine coolant (antifreeze) to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bo[...]

Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Refer to “Maintenance Schedule” for further information. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally hi[...]

W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic T ransmission The automatic transmission and differ ential assembly are contained within a single housing. The fluid level in th[...]

a. If the fluid is hot, the r eading should be in the crosshatched ar ea marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD.” If the fluid level is low , add sufficient fluid through the filler (dipstick) tube to bring it to the [...]

Fluid Level Check – 3.5L Engine The automatic transmission has no dipstick and is dealer serviced only . Fluid and Filter Changes Refer to “Maintenance Schedule” for further information. In addition, change the fluid and filter if the transmission is disassembled for any reason. Selection of Lubricant It is important that the proper lubricant[...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and r oad surfaces during other seasons are highly corrosive to the metal in your vehicl[...]

• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR 威 Super Kleen Bug and T ar Remover or equivalent to remove. • Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax to remove road film, stains and to pr otect your paint finish. T ake care never to scratch the paint. • A void using abrasi[...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR 威 T ouch Up Paint or equivalent on scratches as soon as possible. Y our authorized dealer has[...]

• Do not use any harsh solvents or any other form of protectants on Stain Repel pr oducts. Interior Care Instrument Panel Cover The instrument panel cover has a low glar e surface, which minimizes reflections in the windshield. Do not use protectants or other pr oducts, which may cause undesirable reflections. Use soap and warm water to restor e [...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore[...]

1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can [...]

CAUTION! • When installing the power module cover , it is important to ensure the cover is properly posi- tioned and fully latched. Failure to do so may allow water to get into the TIPM, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The [...]

Cavity Cartridge Fuse Mini- Fuse Description J1 40 Amp Green — Power Folding Seat J2 30 Amp Pink — T ransfer Case Module – If Equipped J3 30 Amp Pink — Rear Door Module J4 25 Amp Natural — Driver Door Node J5 25 Amp Natural — Passenger Door Node J6 40 Amp Green — Anti-Lock Brake Sys- tem (ABS) Pump/ Electronic Stability Program (ESP) [...]

Cavity Cartridge Fuse Mini- Fuse Description J13 60 Amp Y ellow — Ignition Off Draw (IOD) Main J14 40 Amp Green — Electric Back Light (EBL) J15 30 Amp Pink — Rear Blower – If Equipped J17 40 Amp Green — Starter Solenoid J18 20 Amp Blue — NGC (Powertrain Control Module)/ T ransmission Range J19 60 Amp Y ellow — Radiator Fan Motor J20 3[...]

Cavity Cartridge Fuse Mini- Fuse Description M7 — 20 Amp Y ellow Power Outlet #2 (Bat- tery or Accessory (ACC) Selectable) M8 — 20 Amp Y ellow Front Heated Seats – If Equipped M9 — 20 Amp Y ellow Rear Heated Seats – If Equipped Cavity Cartridge Fuse Mini- Fuse Description M10 — 15 Amp Blue V anity Lamps/ Hands-Free Module (HFM) – If E[...]

Cavity Cartridge Fuse Mini- Fuse Description M12 — 30 Amp Green Radio, Amplifier (AMP) M13 — 20 Amp Y ellow Cabin Compartment Node (CCN), Multi- function Switch/Siren Module, ITM M14 — 20 Amp Y ellow T railer T ow (BUX) – If Equipped M15 — 20 Amp Y ellow Auto Dim Rearview Mirror – If Equipped, Infrared Sensor (IR) – If Equipped, Multi[...]

Cavity Cartridge Fuse Mini- Fuse Description M20 — 15 Amp Blue Electronic V ehicle In- formation Center (EVIC) – If Equipped, Interior Lighting, Steering Wheel Switches – If Equipped, Switch Bank M21 — 20 Amp Y ellow Auto Shut Down (ASD) #3 M22 — 10 Amp Red Right Horn M23 — 10 Amp Red Left Horn M24 — 25 Amp Natural Rear W iper Cavity [...]

Cavity Cartridge Fuse Mini- Fuse Description M30 — 15 Amp Blue Rear W iper Module Module/Power Fold- ing Mirror , J1962 Diag Feed M31 — 20 Amp Y ellow Back-Up Lights M32 — 10 Amp Red Occupant Restraint Controller (ORC) M33 — 10 Amp Red NGC (Powertrain Control Module) Bat- tery Feed/TCM Cavity Cartridge Fuse Mini- Fuse Description M34 — 10[...]

Cavity Cartridge Fuse Mini- Fuse Description M38 — 25 Amp Natural Lock/Unlock Motors K1 — — Ignition Run/ Accessory Relay K2 — — Ignition Run Relay K3 — — Starter Solenoid Relay K4 — — Ignition Run/Start Relay K5 — — (NGC) Powertrain Control Module Relay/PCM K6 — — Electric Back Light (EBL) Relay K7 — — — K8 — — [...]

REPLACEMENT BULBS All the inside bulbs are brass or glass wedge base. Aluminum base bulbs are not appr oved and should not be used for replacement. LIGHT BULBS – Interior Bulb Number Courtesy/Reading Lamps (Incandescent) ........ 5 7 8 Courtesy/Reading Lamps (Optional LED) ......................... L E D (Serviced at Authorized Dealer) Glove Box [...]

BULB REPLACEMENT Low Beam Headlamp, High Beam Headlamp, Front T urn Signal/Park Lamp, Side Marker Lamp 1. Open the hood. NOTE: It may be necessary to remove the air cleaner filter housing and position the T otally Integrated Power Module (TIPM) aside to replace certain lamps in the left headlamp housing. 2. Rotate the applicable bulb and connector [...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the headlamp housing and rotate it 1 ⁄ 4 turn clockwise to lock it in place. Front Fog Lamp NOTE: T urn th[...]

CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the fog lamp housing and rotate the connector 1 ⁄ 4 turn clockwise to lock it in place. 5. Reinstall the fr[...]

6. Install the bulb and connector assembly into the taillamp housing and rotate the connector 1 ⁄ 4 turn clock- wise to lock it in place. 7. Reinstall the taillamp housing and fasteners. Changing the T ail Lamp or Backup Lamp 1. Open the liftgate. 2. Remove the two fasteners retaining the taillamp hous- ing to the liftgate from the inboar d face [...]

7. Reinstall the taillamp housing and fasteners. License Plate Lamp 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position. 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing and then pivot the tool to separate the lens[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) Front Wheel Drive (FWD) Models with 2.4L PZEV Engine 18.5 Gallons 70 Liters Front Wheel Drive (FWD) Models without 2.4L PZEV and 3.5L Engine 20.5 Gallons 77.6 Liters All-Wheel Drive Models 21 Gallons 79.8 Liters Engine Oil with Filter 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters 3.5[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil – 2.4L Engine Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard M[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransmission MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Power T ransfer Unit (PTU) MOP AR 威 Gear Lubricant 75W -90 or equivalent. Rear Drive Assembly (RDA) MOP AR 威 Gear Lubricant 75W -90 or equivalent. Brake Master Cylinder MOP AR[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 6 0 䡵 Maintenance Schedule .................. 4 6 0 ▫ Required Maintenance Intervals .......... 4 6 2 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabili[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under[...]

Once a Month • Check tire pr essure and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , and transmission and add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change ?[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 36,000 Miles (60,000 km) or 36 Months Main[...]

42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate [...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine). ❏ Inspect and replace PCV valve if necessary .† Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrys[...]

102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Flush and replace the engine coolant. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the[...]

1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ [...]

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Ro[...]

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Ro[...]

† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 7 9 ▫ Prepar e For The Appointment ........... 4 7 9 ▫ Prepar e A List ...................... 4 7 9 ▫ Be Reasonable W ith Requests ............ 4 7 9 䡵 If Y ou Need Assistance ................. 4 7 9 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 4 8 3 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 8 5 ▫ T readwear ......................... 4 8 5 ▫ T raction Grades ..................... 4 8 5 ▫ T emperature Grades .................. 4 8 6 478 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in the[...]

W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -co[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to F[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe ti[...]

INDEX 10[...]

About Y our Brakes .................... 312,315 ABS (Anti-Lock Brake System) ......... 193,316,317 Adding Engine Coolant (Antifreeze) .......... 4 2 6 Adding Fuel ........................... 3 5 7 Adding W asher Fluid ..................... 4 2 0 Additives, Fuel ......................... 3 5 5 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 4[...]

Auto Unlock, Doors ....................... 3 0 Automatic Dimming Mirror ................. 9 5 Automatic Door Locks ..................... 3 0 Automatic Headlights .................... 1 2 2 Automatic Oil Change Indicator .......... 188,205 Automatic T emperature Control (A TC) ......... 2 7 7 Automatic T ransaxle ................... 298,432 Adding F[...]

W arning Light ........................ 1 9 5 Brakes ............................. 315,430 Brake/T ransaxle Interlock .................. 3 0 0 Break-In Recommendations, New V ehicle ........ 8 3 Bulb Replacement ..................... 449,450 Bulbs, Light .......................... 88,449 Calibration, Compass .................. 201,209 Camera, Rear [...]

Checking Y our V ehicle For Safety ............. 8 4 Checks, Safety ........................... 8 4 Child Booster Seat ........................ 7 3 Child Restraint .................. 71,72,75,79,81 Child Restraint T ether Anchors ............. 77,79 Child Safety Locks ........................ 3 2 Clean Air Gasoline ....................... 3 5 4 Cle[...]

Selection of Coolant (Antifreeze) ...... 425,455,456 T emperature Gauge .................... 1 8 3 Corrosion Pr otection ..................... 4 3 5 Cruise Contr ol (Speed Control) .............. 1 3 4 Cruise Light ........................... 1 9 0 Cupholders ......................... 156,440 Customer Assistance ..................... 4 7 9 Customer[...]

Anti-Lock Brake System ................. 3 1 6 Brake Assist System .................... 3 1 9 Electronic Roll Mitigation ................ 3 2 0 Electronic Stability Pr ogram ............... 3 2 1 T raction Control System ................. 3 2 0 Electronic Roll Mitigation (ERM) ............. 3 2 0 Electronic Speed Contr ol (Cruise Contr ol) ...... 1[...]

Oil Synthetic ......................... 4 1 1 Operation ............................ 8 3 Overheating .......................... 3 8 0 Starting ............................. 2 9 5 T emperature Gauge .................... 1 8 3 Engine Oil V iscosity ...................... 4 1 1 Enhanced Accident Response Feature .......... 6 5 Entry System, Illuminate[...]

Engine Oil ........................... 4 0 9 Power Steering ..................... 312,457 Fluids ................................ 4 5 6 Fluids, Lubricants and Genuine Parts .......... 4 5 6 Fog Light Service ........................ 4 5 1 Fog Lights .................... 121,125,184,451 Folding Rear Seat ..................... 1 17,109 Freeing A Stuc[...]

Odometer ........................... 1 8 6 Speedometer ......................... 1 8 5 T achometer .......................... 1 8 6 Gear Ranges ........................... 3 0 1 Gearshift .............................. 3 0 1 General Information ............... 17,25,306,352 General Maintenance ..................... 4 0 8 Glass Cleaning ............[...]

Hitches T railer T owing ........................ 3 6 6 Holder , Coin ........................... 1 5 8 Holder , Cup ........................... 1 5 6 HomeLink 威 (Garage Door Opener) T ransmitter . . . 140 Hood Release .......................... 1 1 9 Ignition ............................... 1 4 K e y ............................... 12,14 Ignitio[...]

Keys ................................. 1 2 Knee Bolster ............................ 5 4 Lane Change and T urn Signals .............. 1 2 6 Lap/Shoulder Belts ....................... 4 1 LA TCH (Lower Anchors and T ether for CHildren) ............................ 77,79 Latch Plate ............................. 4 2 Latches ..........................[...]

Headlight Switch ................... 121,122 Headlights ........................ 122,450 Headlights On Reminder ................. 1 2 5 Headlights On W ith W ipers ............ 123,132 High Beam ..................... 127,185,450 High Beam Indicator .................... 1 8 5 High Beam/Low Beam Select ............. 1 2 7 Illuminated Entry ..........[...]

Power Door ........................... 2 9 Low T ire Pressur e System .................. 3 4 4 Lower Anchors and T ether for CHildren (LA TCH) ............................ 77,79 Lubrication, Body ....................... 4 1 7 Luggage Rack (Roof Rack) ................. 1 7 3 Lumbar Support ........................ 1 0 1 Maintenance Free Battery ....[...]

Navigation Radio (Uconnect 威 gps) ........... 2 5 1 Navigation System (Uuconnect 威 gps) ....... 137,251 New V ehicle Break-In Period ................ 8 3 Occupant Restraints ................... 39,61,66 Occupant Restraints (Sedan) ........... 57,58,61,64 Octane Rating, Gasoline (Fuel) ............ 353,456 Odometer T r i p ......................[...]

Passenger Seat Back T ilt (Easy Entry System) .... 1 1 4 Passing Light ........................... 1 2 7 Personal Settings ........................ 2 1 0 Pets .................................. 8 3 Phone, Cellular .................... 98,251,252 Phone, Hands-Free (Uconnect™) ........ 98,251,252 Placard, T ire and Loading Information ......... 3 3[...]

Rear Air Conditioning .................... 2 8 3 Rear Camera ........................... 1 3 7 Rear Cupholder ......................... 1 5 6 Rear Liftgate ............................ 3 8 Rear Seat, Folding .................... 109,1 17 Rear W indow Defroster ................... 1 7 2 Rear W indow Features .................... 1 7 1 Rear W iper/W [...]

Safety Checks Outside V ehicle ............... 8 8 Safety Defects, Reporting .................. 4 8 2 Safety , Exhaust Gas ..................... 39,85 Safety Information, T ire ................... 3 2 5 Safety T ips ............................. 8 4 Satellite Radio Antenna ................... 2 5 7 Satellite Radio (Uconnect 威 studios) . . . 251,2[...]

Sentry Key (Immobilizer) ................... 1 5 Sentry Key Programming ................... 1 7 Sentry Key Replacement ................... 1 6 Service Assistance ....................... 4 7 9 Service Contract ......................... 4 8 1 Service Engine Soon Light (Malfunction Indicator) .................... 1 9 3 Service Manuals ................[...]

Steering Column Lock ......................... 1 3 3 Power ........................... 3 1 1,312 T ilt Column .......................... 1 3 3 Wheel, T ilt ........................... 1 3 3 Steering Wheel Mounted Sound System Controls ......................... 2 6 7 Storage ............................ 158,448 Storage, V ehicle ....................[...]

Chains .............................. 3 4 3 Changing ............................ 3 8 1 Compact Spare ........................ 3 3 8 General Information .................... 3 3 5 High Speed .......................... 3 3 7 Inflation Pressur es ..................... 3 3 6 Jacking ............................. 3 8 1 Life of T ires ..................[...]

T railer and T ongue W eight ............... 3 6 9 W iring .............................. 3 7 4 T railer T owing Guide ..................... 3 6 7 T railer W eight .......................... 3 6 7 T ransaxle Additives ............................ 4 3 4 Automatic ........................ 298,432 Autostick ............................ 3 0 5 Filter ..[...]

V anity Mirrors ........................... 9 7 V ariance, Compass .................... 200,209 V ehicle Certification Label ................. 3 5 9 V ehicle Identification Number (VIN) ............ 6 V ehicle Loading ................... 332,359,361 V ehicle Modifications/Alterations .............. 7 V ehicle Storage ....................... 287,448[...]

W indshield W iper Blades .................. 4 1 8 W indshield W ipers ....................... 1 2 8 W iper Blade Replacement .................. 4 1 8 W iper , Delay ........................... 1 3 0 W iper , Rear ............................ 1 7 1 W ipers, Intermittent ...................... 1 3 0 W recker T owing ......................... 3 9 8 5[...]

Chrysler Group LL C 10D41-126-A C 3rd Edition Printed in U.S.A.[...]