Dodge Challenger SRT (2010) manual

OWNER’ S MANUAL 2010 Challenger SRT[...]

291686.ps 11Y532-126-AA Chrysler 1" gutter 07/14/2010 08:26:13 VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. [...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 7 7 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with t[...]

1 INTRODUCTION 5[...]

W ARNINGS AND CAUTIONS This Owner’s Manual contains W ARNINGS against op- erating procedur es that could result in a collision or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e manual, you may miss important information. Observe all W arnings and Caution[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. 1 INTRODUCTION 7[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ Removing Key FOB From Ignition ......... 1 4 ▫ Key-In-Ignition Reminder ............... 1 5 䡵 Sentry Key 威 .......................... 1[...]

▫ T o Open The T runk .................... 2 5 ▫ Using The Panic Alarm ................. 2 5 ▫ Programming Additional T ransmitters ...... 2 5 ▫ T ransmitter Battery Replacement .......... 2 5 ▫ General Information ................... 2 6 䡵 Remote Starting System .................. 2 7 ▫ How T o Use Remote Start ............... 2 7 ?[...]

▫ Supplemental Restraint System (SRS) - Airbags ............................ 4 8 ▫ Airbag Deployment Sensors And Controls . . . 54 ▫ Event Data Recorder (EDR) .............. 6 1 ▫ Child Restraints ...................... 6 2 䡵 Engine Break-In Recommendations .......... 7 1 䡵 Safety T ips ........................... 7 2 ▫ T ransporting [...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up. Keyless Enter-N-Go Feature This vehicle may be equipped with t[...]

Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. The emergency key is also for locking the glove box. Y ou can kee[...]

T o remove the emer gency key , slide the mechanical latch at the top of the Key Fob sideways with your thumb and then pull the key out with your other hand. NOTE: Y ou can insert the double-sided emergency key into the lock cylinders with either side up. Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the Key Fob to the OFF po[...]

W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Do not leave the Key Fob in the ignition or a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode. A child could operate power windows, other co[...]

SENTR Y KEY 姞 The Sentry Key 威 Immobilizer System prevents unauthor - ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regar dless of whether the vehicle is locked or unlocked. The system uses Key Fob with factory-mated Remote Keyless Entry (RKE) transmitter and W ireless[...]

Replacement Keys NOTE: Only Key Fobs that are pr ogrammed to the vehicle electronics can be used to start and operate the vehicle. Once a Key Fob is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! • Always remove the Key Fobs from the vehicle and lock all doors when leaving the vehicle unat- tended. • For vehicle[...]

• This device must accept any interference that may be received, including interfer ence that may cause unde- sired operation. VEHICLE SECURITY ALARM The V ehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition switch for unau- thorized operation. While the V ehicle Security Alarm is armed, interior switches for [...]

V ehicles Equipped with Keyless Enter-N-Go Press the Keyless Enter -N-Go Start/Stop button until the Electronic V ehicle Information Center (EVIC) indicates that the vehicle ignition is ⬙ OFF ⬙ (refer to “Starting Procedur es” in “Starting And Operating” for further information). Then either press the power door LOCK switch while the dr[...]

If the V ehicle Security Alarm is armed and the battery becomes disconnected, the V ehicle Security Alarm will remain armed when the battery is r econnected. The exterior lights will flash, and the horn will sound. If this occurs, disarm the V ehicle Security Alarm. V ehicles Equipped with Keyless Enter-N-Go Either press the UNLOCK button on the RK[...]

REMOTE KEYLESS ENTR Y (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from dis- tances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter . The RKE transmitter does not need to be pointed at the vehicle to activate the system. NOTE: Inserting the Key Fob with RKE [...]

Remote Key Unlock, Driver Door/All Doors First This feature lets you pr ogram the system to unlock either the driver’s door or both doors on the first press of the UNLOCK button on the RKE transmitter . Refer to “Elec- tronic V ehicle Information Center (EVIC)/Personal Set- tings (Customer-Pr ogrammable Features)” in “Under- standing Y our [...]

• When not using the EVIC, perform the following steps: 1. Press and hold the UNLOCK button on a pr ogrammed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the LOCK button while still holding the UNLOCK button. 2. Release both buttons at the same time. 3. T est the feature while outside of the vehicle [...]

Sound Horn with Remote Key Lock This feature will cause the horn to chirp when the doors are locked with the RKE transmitter . This feature can be turned on or turned off. Refer to “Electr onic V ehicle Information Center (EVIC)/Personal Settings (Customer- Programmable Featur es)” in “Understanding Y our In- strument Panel” for further inf[...]

T o Open The T runk Press the TRUNK button on the RKE transmitter two times within five seconds to open the trunk. Using The Panic Alarm T o turn the Panic Alarm featur e ON or OFF , press and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights and park lights will flash, the[...]

2. Remove and replace the battery . When replacing the battery , match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover . A void touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery , clean it with rubbing alcohol. 3. T o reassemble the RKE [...]

REMOTE ST ARTING SYSTEM This system uses the Remote Keyless Entry (RKE) transmitter to start the engine conve- niently from outside the vehicle while still maintaining security . The system has a range of approximately 300 ft (91 m). NOTE: The vehicle must be equipped with an auto- matic transmission to be equipped with Remote Start. How T o Use Re[...]

T o Enter Remote Start Mode Press and r elease the REMOTE ST AR T button on the RKE transmitter twice, within five sec- onds. The parking lights will flash and the horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. NOTE: • If an engine fault is present the[...]

equipped). Then, prior to the end of the 15 minute cycle, press and r elease the ST AR T/STOP button. If the ST ART/ST OP button is not present, insert the Key Fob into the ignition switch and turn the switch to the ON/RUN position. NOTE: • For vehicles not equipped with Keyless Enter-N-Go feature, the ignition switch must be in the ON/RUN positi[...]

If the door lock knob is down when you shut the door , the door will lock. Therefor e, make sure the key is not inside the vehicle before closing the door . W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle,[...]

If you press the power door lock switch while the Key Fob is in the ignition, and either door is open, the power locks will not operate. This prevents you fr om acciden- tally locking the Key Fob in the vehicle. Removing the Key Fob or closing the door will allow the locks to operate. If a door is open, the Key Fob is in the ignition, and the ignit[...]

6. The vehicle speed is 0 mph (0 km/h) Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled. Refer to “Electronic V ehicle Infor- mation Center (EVIC)/Personal Settings (Customer- Programmable Featur es)” in “Understanding Y our In- strument Panel” for further information. • When[...]

WINDOWS Power Windows The window controls on the driver’s door contr ol both of the door windows. There is a single window contr ol on the passenger’s door trim panel that operates the window on the passenger’s door . The window controls will operate only when the ignition switch is in the ON/RUN or ACC position. NOTE: • The door window wil[...]

AUTO-Down Feature The driver’s door power window switch and passenger door power window switch have an AUTO-down fea- ture. Pr ess the window switch to the second detent, release, and the window will go down automatically . T o open the window part way , press the window switch to the first detent and release it when you want the window to stop. [...]

NOTE: The transmission must be in P ARK before the button will operate. If equipped with a manual transmis- sion, the vehicle speed must be under 5 mph (8 km/h) before the button will operate. The trunk lid can be r eleased from outside the vehicle by pressing the T runk Release button on the Re- mote Keyless Entry (RKE) trans- mitter twice within [...]

T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the tr unk lid, near the latch, and is coated so that it glows in a darkened trunk. Pull on the handle to open the trunk. OCCUP ANT RESTRAINTS Some of the most important safety features in your vehicle are the r estraint [...]

If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also can be used to hold infant and child restraint systems. For mor e information on LA TCH, see Lower Anchors and T ether for CHildren (LA TCH). NOTE: The Advanced Front Airbags have a multistage inf[...]

of ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows the shoulde[...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in an accident much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instruc- tions to wear your seat belt safely and to keep your passengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in an accident, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs are not as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bones will t[...]

5. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The r etractor will withdraw any slack in the belt. 6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to re[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to cr eate a fold that begins immediately above the latch plate. 3[...]

How T o Disengage The Automatic Locking Mode Unbuckle the combination lap/shoulder belt and allow it to retract completely to disengage the Automatic Locking Mode and activate the vehicle sensitive (emergency) locking mode. Energy Management Feature This vehicle has a safety belt system with an Energy Management feature in the fr ont seating positi[...]

NOTE: These devices are not a substitute for pr oper seat belt placement by the occupant. The seat belt still must be worn snugly and positioned properly . The pretensioners ar e triggered by the Occupant Re- straint Controller (ORC). Like the airbags, the pr etension- ers are single use items. A deployed pretensioner or a deployed airbag must be r[...]

BeltAlert 威 Programming The BeltAlert 威 can be enabled or disabled by your authorized dealer or by performing the following steps: NOTE: Chrysler Group LLC does not r ecommend de- activating the BeltAlert 威 . 1. W ith both doors closed, and the ignition switch in any position except ON/RUN or ST ART , buckle the driver’s seat belt. 2. T urn[...]

Seat Belts and Pregnant Women W e recommend that pr egnant women use the seat belts throughout their pr egnancy . Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen[...]

Supplemental Restraint System (SRS) - Airbags This vehicle has Advanced Front Airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s Advanced Front Air- bag is mounted in the center of the steering wheel. The passenger’s Advanced Front Airbag is mounted in the instrument panel, above the[...]

The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Airbags based upon seat position.[...]

• Supplemental Side Airbag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pr etensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Airbag Features The Advanced Front Airbag system has multistage driver and front passenger airbags. This system pr ovides output appropriate to the se[...]

W ARNING! (Continued) • Do not mount any accessories to the knee bolster such as alarm lights, stereos, citizen band radios, etc. Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags may offer side-impact and vehicle r ollover protection to fr ont and rear seat outboard occupants in addition to that provided by the bo[...]

• Being too close to the SABIC airbags during deploy- ment could cause you to be severely injur ed or killed. The system includes side impact sensors adjacent to both front and r ear seat occupants that are calibrated to deploy the SABIC airbags during impacts that requir e airbag occupant protection. W ARNING! • If your vehicle is equipped wit[...]

W ARNING! Infants in rear-facing child restraints should never ride in the front seat of a vehicle with a passenger Advanced Front Airbag. An airbag deployment can cause severe injury or death to infants in that posi- tion. Children that ar e not big enough to wear the vehicle seat belt properly (see Section on Child Restraints) should be secured i[...]

Do not lean against the door or window . If your vehicle has side airbags, and deployment occurs, the side airbags will inflate forcefully into the space between you and the door . If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under ⬙ If Y ou Ne[...]

The ORC determines if deployment of the front and/or side airbags in a frontal or side collision is r equired. Based on the impact sensors signals, a central electronic ORC deploys the Advanced Fr ont Airbags, SABIC air - bags — if equipped, and front seat belt pr etensioners — if equipped, as requir ed, depending on the severity and type of im[...]

position, in the ACC position, or not in the ignition, the airbag system is not on and the airbags will not inflate. The ORC contains a backup power supply system that may deploy the airbags even if the battery loses power or it becomes disconnected prior to deployment. Also, the ORC turns on the Airbag W arning Light in the instrument panel for ap[...]

wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the airbags inflate to their full size. The airbags fully inflate in about 50 to 70 milliseconds. This is about half of the time it takes to blink your eyes. The airbags then quickly deflate while helping to restrain the driver and fr ont passe[...]

Front and Side Impact Sensors In front and side impacts, impact sensors can aid the ORC in determining appropriate r esponse to impact events. Additional sensors in the ORC determine the level of airbag deployment and provide verification. Enhanced Accident Response System In the event of an impact causing airbag deployment, if the communication ne[...]

floor . They are not caused by contact with chemicals. They are not permanent and normally heal quickly . However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-pr oduct of the pro[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. The airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the airbag system immediately . • The Airbag W arning Light does not come on during the four to eight seconds when the[...]

• How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, • How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur . NOTE: EDR data are r ecorded by your vehicle only if a non-trivial crash situation occurs; no data are r ecor[...]

W ARNING! In an collision, an unrestrained child, even a tiny baby , can become a projectile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a pro[...]

W ARNING! Rearward-facing child seats must never be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off. An airbag deployment could cause severe injury or death to infants in this position. Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year [...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer to www .seatcheck.org [...]

Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. Chrysler Gr oup LLC also recommends that you make sure that you can install the child r estraint in the vehicle where you will use it befor e you buy it.[...]

available for some time. For some older child restraints, many child restraint manufactur ers offer add-on tether strap kits or retr ofit kits. Y ou are ur ged to take advantage of all the available attachments provided with your child restraint in any vehicle. All three r ear-seating positions have lower anchorages that are capable of accommodatin[...]

Installing the LA TCH-Compatible Child Restraint System W e urge you to follow the manufactur er’s directions carefully when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that are pr ovided with the child restraint system. The rear sea[...]

provide the most dir ect path between the anchor and the child restraint. Finally , tighten all three straps as you push the child restraint r earward and downward into the seat, removing slack in the straps accor ding to the child restraint manufactur er’s instructions. NOTE: • Ensure that the tether strap does not slip into the opening betwee[...]

Installing Child Restraints Using the V ehicle Seat Belt The seat belts in the passenger seating positions are equipped with either an Automatic Locking Retractor (ALR) or a cinching latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat belt tight around the child r estraint so that it is not necessary to us[...]

3. Attach the tether strap hook (A) of the child restraint to the anchor (B) and remove slack in the tether strap according to the child r estraint manufacturer’s instruc- tions. NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap [...]

While cruising, brief full-thr ottle acceleration within the limits of local traffic laws contributes to a good br eak-in. However , wide-open throttle acceleration in low gear can be detrimental and should be avoided. The engine oil, transmission fluid, and axle lubricant installed at the factory is high-quality and energy- conserving. Oil, fluid,[...]

W ARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using a seat belt properly . Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it [...]

damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for br oken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, inspect the exhaust system each time the vehicle is raised for lubrication or oil[...]

they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways. W ARNING! Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious per- sonal injury . • Always make sure that floor mats are properly attached to the floor mat fasteners. • Never place [...]

W ARNING! (Continued) Failure to properly follow floor mat installation or mounting can cause interference with the brake pedal and accelerator pedal operation causing loss of control of the vehicle. Periodic Safety Checks Y ou Should Make Outside the V ehicle T ires Examine tires for excessive tr ead wear and uneven wear patterns. Check for stones[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 8 1 ▫ Automatic Dimming Mirror .............. 8 1 ▫ Outside Mirrors ...................... 8 2 ▫ Outside Mirrors Folding Featur e .......... 8 2 ▫ Power Mirrors ....................... 8 3 ▫ Heated Mirrors — If Equipped ............ 8 3 ▫ [...]

▫ V oice Command System Operation ........ 1 1 4 ▫ Commands ........................ 1 1 6 ▫ V oice T raining ...................... 1 1 9 䡵 Seats .............................. 1 1 9 ▫ Power Seats ........................ 1 1 9 ▫ Manual Front Seatback Recline ........... 1 2 1 ▫ Lumbar Support ..................... 1 2 2 ▫ Head Res[...]

▫ Overhead Console Map/Reading Lights .... 1 3 2 ▫ Interior Lights ...................... 1 3 3 䡵 W indshield W ipers And W ashers .......... 1 3 4 ▫ Intermittent W iper System .............. 1 3 5 ▫ Mist Feature ........................ 1 3 5 ▫ W indshield W ashers .................. 1 3 5 ▫ Headlights On W ith W ipers (A vailable W [...]

▫ T roubleshooting T ips .................. 1 4 7 ▫ General Information .................. 1 4 8 䡵 Power Sunroof — If Equipped ............ 1 4 8 ▫ Opening Sunroof — Partially ............ 1 4 9 ▫ Opening Sunroof — Expr ess ............ 1 5 0 ▫ Closing Sunroof — Partially ............. 1 5 0 ▫ Closing Sunroof — Expr ess ....[...]

MIRRORS Automatic Dimming Mirror This mirror automatically adjusts for headlight glar e from vehicles behind you. Y ou can turn the feature on or off by pr essing the button at the base of the mirror . A light next to the button will illuminate to indicate when the dimming feature is activated. CAUTION! T o avoid damage to the mirror during cleanin[...]

Outside Mirrors T o receive maximum benefit, adjust the outside mirr or(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the inside mirr or . NOTE: The passenger side convex outside mirror will give a much wider view to the rear , and especially of the lane next to your vehicle. W ARNING! V ehicles and oth[...]

Power Mirrors The power mirror switch is located on the driver’s door trim panel next to the power door lock switch. A rotary knob selects the left mirror , right mirror or of f position. After selecting a mirror , move the knob in the same direction you want the mirr or to move. Use the center off position to guard against accidentally moving a [...]

Illuminated V anity Mirrors An illuminated vanity mirror is located on the sun visor . T o use the mirror , rotate the sun visor downwar d and swing the mirror cover upwar d. The light turns on automatically . Close the mirror cover to turn off the light. “Slide-On-Rod” and Extender Features of Sun Visor T o use the “Slide-On-Rod” feature o[...]

Uconnect™ Phone — IF EQUIPPED Uconnect™ Phone is a voice-activated, hands-free, in- vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your cellular phone using simple voice commands (e.g., ⬙ Call” ѧ “Mike” ѧ ”W ork ⬙ or ⬙ Dial” ѧ “248-555-1212 ⬙ ). Y our cellular phone’s audio i[...]

Uconnect™ Phone allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect™ Phone is driven through your Bluetooth 威 “Hands-Free Pr ofile” cellular phone. Uconnect™ features Bluetooth 威 technology - t[...]

The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetooth 威 cellular phone. See the Uconnect™ website for supported phones. If your cellu- lar phone supports a differ ent profile (e.g., Headset Profile) you may not be able to use any Uconnect™ Phone features. Refer to your cellular service pr ovider or the phone manufa[...]

⬙ Phonebook ⬙ and ⬙ New Entry . ⬙ Please remember , the Uconnect™ Phone works best when you talk in a normal conversational tone, as if speaking to someone sitting a few feet/meters away from you. V oice Command T ree Refer to “V oice T ree” in this section. Help Command If you need assistance at any prompt, or if you want to know you[...]

The following are general phone to Uconnect™ Phone pairing instructions: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the beep, say ⬙ Pair a Phone ⬙ and follow the audible prompts. • Y ou will be asked to say a four-digit Personal Identi- [...]

Dial by Saying a Number • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Dial. ⬙ • The system will prompt you to say the number you want to call. • For example, you can say ⬙ 234-567-8901 ⬙ . • The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in th[...]

• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook New Entry . ⬙ • When prompted, say the name of the new entry . Use of long names helps the V oice Command and it is recom- mended. For example, say ⬙ Robert Smith ⬙ or ⬙ Robert ⬙ instead of ⬙ Bob. ⬙ • When prompted, enter the number designation (e.g., ⬙[...]

• Automatic download and update, if supported, begins as soon as the Bluetooth 威 wireless phone connection is made to the Uconnect™ Phone, for example, after you start the vehicle. • A maximum of 1000 entries per phone will be down- loaded and updated every time a phone is connected to the Uconnect™ Phone. • Depending on the maximum num[...]

NOTE: • The phone handset must support Bluetooth 威 OBEX transfers of phonebook entries to use this feature. • Some phones cannot send phonebook entries if they are alr eady connected to any system via Bluetooth 威 , and you may see a message on the phone display that the Bluetooth 威 link is busy . In this case, the user must first disconne[...]

After you are finished editing an entry in the phonebook, you will be given the opportunity to edit another entry in the phonebook, call the number you just edited, or return to the main menu. ⬙ Phonebook Edit ⬙ can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have[...]

Delete/Erase “All” Uconnect™ Phonebook Entries • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Erase All. ⬙ • The Uconnect™ Phone will ask you to verify that you wish to delete all the entries from the phonebook. • After confirmation, the phonebook entries will be deleted. ?[...]

Phone Call Features The following features can be accessed thr ough the Uconnect™ Phone if the feature(s) ar e available on your cellular service plan. For example, if your cellular service plan provides thr ee-way calling, this feature can be accessed through the Uconnect™ Phone. Check with your cellular service provider for the featur es that[...]

in progr ess. T o go back to the first call, refer to ⬙ T oggling Between Calls ⬙ in this section. T o combine two calls, refer to ⬙ Conference Call ⬙ in this section. Place/Retrieve a Call From Hold T o put a call on hold, press the button until you hear a single beep. This indicates that the call is on hold. T o bring the call back from h[...]

Call T ermination T o end a call in progr ess, momentarily press the button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. If the active call is terminated by the phone far end, a call on hold may not become active automatically . This is cell phone-dependent. T o bring the call back [...]

Uconnect™ Phone Features Language Selection T o change the language that the Uconnect™ Phone is using: • Press the button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to English, Espanol, or Francais. • Continue to follow the system prompts to complete the language sele[...]

Canada and 060 for Mexico). The number dialed may not be applicable with the available cellular service and area. • If supported, this number may be programmable on some systems. T o do this, press the button and say ‘Setup’, followed by ‘Emergency’. • The Uconnect™ Phone does slightly lower your chances of successfully making a phone[...]

Paging T o learn how to page, refer to ⬙ W orking with Automated Systems. ⬙ Paging works properly except for pagers of certain companies, which time out a little too soon to work properly with the Uconnect™ Phone. V oice Mail Calling T o learn how to access your voice mail, refer to ⬙ W orking with Automated Systems. ⬙ W orking with Autom[...]

The Uconnect™ Phone will then send the corresponding phone number associated with the phonebook entry , as tones over the phone. NOTE: • Y ou may not hear all of the tones due to cellular phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the us[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the Uconnect™ Phone (while dialing via the cellular phone keypad, the user must exercise caution and take precautionary safety measur es). By dialing a number with your paired Bluetooth 威 cellular phone, the audio will be played th[...]

from your Uconnect™ Phone pair ed cellular phone to the Uconnect™ Phone or vice versa, press the button and say ⬙ T ransfer Call. ⬙ Connect or Disconnect Link Between the Uconnect™ Phone and Cellular Phone Y our cellular phone can be paired with many dif ferent electronic devices, but can only be actively ⬙ connected ⬙ with one electr[...]

• The selected phone will be used for the next phone call. If the selected phone is not available, the Uconnect™ Phone will return to using the highest priority phone present in or near (appr oximately within 30 ft (9 m)) the vehicle. Delete Uconnect™ Phone Paired Cellular Phones • Press the button to begin. • After the ⬙ Ready ⬙ prom[...]

Repeat the words and phrases when pr ompted by the Uconnect™ Phone. For best results, the V oice T raining session should be completed when the vehicle is parked with the engine running, all windows closed, and the blower fan switched off. This procedur e may be repeated with a new user . The system will adapt to the last trained voice only . T o[...]

• When navigating through an automated system such as voice mail, or when sending a page, at the end of speaking the digit string, make sure to say ⬙ Send. ⬙ • Storing names in the phonebook when the vehicle is not in motion is recommended. • It is not recommended to stor e similar sounding names in the Uconnect™ Phonebook. • Phoneboo[...]

• Performance, such as audio clarity , echo, and loudness to a large degr ee rely on the phone and network, and not the Uconnect™ Phone. • Echo at the phone far end can sometimes be reduced by lowering the in-vehicle audio volume. • In a convertible vehicle, system performance may be compromised with the convertible top down. Bluetooth 威 [...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 109[...]

1 10 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 1 1[...]

V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts continue delete dial download edit emergency English erase all Espanol Francais help home 1 12 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oice Commands Primary Alternate(s) return to main menu return or main menu select phone select send set up phone settings or phone set up towing assistan[...]

General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly appr oved by the party responsible for compliance could void the user’s authority to operate the equipment. • This device may not cause harmful interf[...]

NOTE: If you do not say a command within a few seconds, the system will present you with a list of options. If you ever wish to interrupt the system while it lists options, press the V oice Command button, listen for the beep, and say your command. Pressing the V oice Command button while the system is speaking is known as “barging in.” The sys[...]

Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button. 2. Say a command (e.g., “Help”). 3. Use the ON/OFF VOLUME rotary knob to adjust t[...]

Radio FM T o switch to the FM band, say “FM” or “Radio FM”. In this mode, you may say the following commands: • “Frequency” (to change the fr equency) • “Next Station” (to select the next station) • “Previous Station” (to select the pr evious station) • “Radio Menu” (to switch to the radio menu) • “Main Menu” ([...]

Memo T o switch to the voice recor der mode, say “Memo”. In this mode, you may say the following commands: • “New Memo” (to recor d a new memo) — During the recor ding, you may press the V oice Command button to stop recor ding. Y ou proceed by saying one of the following commands: − “Save” (to save the memo) − “Continue” (t[...]

NOTE: Keep in mind that you have to press the V oice Command button first and wait for the beep before speaking the “Bar ge In” commands. V oice T raining For users experiencing difficulty with the system r ecog- nizing their voice commands or numbers the Uconnect™ V oice “V oice T raining” feature may be used. 1. Press the V oice Command[...]

switch is used to adjust the angle of the seatback. Push forward or r earward on the switch to change the position of the seatback. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the se[...]

Manual Front Seatback Recline T o recline: 1. Lean forward in the seat and lift the handle, then lean back to the desired position and r elease the handle. 2. Lift the handle to return the seatback to an upright position. W ARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collisi[...]

Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support. Head Restraints Head restraints can r educe the risk of injury in the event of a rear impact. The head r estraints should be adjusted so the top[...]

W ARNING! Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the event of a collision. The head restraints should always be checked prior to operating the vehicle and never adjusted while the vehicle is in motion. Always adjust the head restraints when the vehicle is in P ARK. Heated Sea[...]

Press the switch once to select High-level heat- ing. Press the switch a second time to select Low-level heating. Press the switch a thir d time to shut the heating elements Off. If high level heating is selected, the system will automati- cally switch to the low level after 30 minutes of continu- ous operation. At that time, the number of indicato[...]

CAUTION! Repeated overheating of the seat could damage the heating element and/or degrade the material of the seat. Easy Entry Seats Pulling upward on the lever , located on the seatback, allows the seatback to dump forward and the seat to slide forward. Y ou can also temporarily remove the seat belt from the guide loop on the seat and allow the se[...]

Folding Rear Seat The rear seatbacks can be folded forwar d to provide an additional storage area. Pull on the loops shown in the illustration to fold down either or both seatbacks. These loops can be tucked away when not in use. When the seatback is folded to the upright position, make sure it is latched by str ongly pulling on the top of the seat[...]

TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Hood Release Lever Hood Safety Catch 3 UNDERS[...]

CAUTION! T o prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approxi- mately 6 in (15 cm), and then drop it. This should secure both latches. Never drive your vehicle unless the hood is fully closed, with both latches engaged. W ARNING! Be sure the hood is fully latched before driving your vehicle. If the [...]

Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. T urn it to the second detent for headlight, parking light and instrument panel light operation. Automatic Headlights This system automatically turns the headlights on or off according to ambient light levels. T o turn the system on, ro[...]

T o activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn of f the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off. If you turn the headlights or parking lights, or place the ignition in the RUN position, the system will cancel the delay . If [...]

An indicator light in the instrument cluster illuminates when the fog lights are turned on. NOTE: The fog lights will operate with the low beam headlights or parking lights on. However , selecting the high beam headlights will turn off the fog lights. Multifunction Lever The multifunction lever controls the operation of the turn signals, headlight [...]

NOTE: • If either light remains on and does not flash, or ther e is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective. • A “T urn Signal On” message will appear in the Elec- tronic V ehicle Information Center (EVIC) [...]

Interior Lights The interior lights come on when a door is opened. T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition is placed in the OFF position. This will occur if the interior lights were switched on manually or ar e on because a door is open. This includes the glove box light, but not the t[...]

Interior Light Defeat (OFF) Rotate the dimmer control to the extr eme bottom off position. The interior lights will remain of f when the doors are open. Parade Mode (Daytime Brightness Feature) Rotate the dimmer control upwar d to the first detent. This feature brightens all text displays such as the odometer , Electronic V ehicle Information Cente[...]

CAUTION! T urn the windshield wipers off when driving through an automatic car wash. Damage to the wind- shield wipers may result if the wiper switch is left in any position other than off. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle with a variable pause be- tween cycles desirable. Rotate[...]

W ARNING! Sudden loss of visibility through the windshield could lead to a collision. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with the defroster before and during windshield washer use. Headlights On With Wipers (A vailable with Automatic Headlights[...]

T o unlock the steering column, pull the control handle outward. T o tilt the steering column, move the steering wheel upward or downwar d as desired. T o lengthen or shorten the steering column, pull the steering wheel outward or push it inwar d as desired. T o lock the steering column in position, push the control handle inwar d until fully engag[...]

ELECTRONIC SPEED CONTROL When engaged, Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever , located on the right- side of the steering wheel, operates the system. NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been design[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have a collision. Always leave the system OFF when you are not using it. T o Set A Desired Speed T urn the Electronic Speed Contr ol ON. When the vehicle re[...]

previous set speed. T o do so, push the lever upward to RESUME ACCEL and release. Then remove your foot from the accelerator pedal. T o V ary the Speed Setting When the Electronic Speed Contr ol is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set [...]

On steep hills, a greater speed loss or gain may occur , so it may be preferable to drive without Electr onic Speed Control. W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control and have a collision. Do not use Electron[...]

These lights also turn on when a door is opened, when the UNLOCK button on the Remote Keyless Entry (RKE) transmitter is pressed, or when the dimmer contr ol is turned fully upward, past the second detent. Sunglasses Storage At the rear of the console, a compartment is pr ovided for the storage of a pair of sunglasses. The storage compartment acces[...]

W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse” feature as required by federal safety standards. T[...]

2. Place the handheld transmitter 1 to 3 in (3 to 8 cm) from the HomeLink 威 buttons while keeping the EVIC display in view . For optimal training, point the battery end of the hand- held transmitter away from the HomeLink 威 . 3. Simultaneously , press and hold both the chosen HomeLink 威 button and the handheld transmitter button until the EVI[...]

This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open and close the door). 1. Firmly press and r elease the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step aft[...]

Gate Operator/Canadian Programming Canadian radio-frequency laws r equire transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink 威 to pick up the signal during programming. Similar to this Canadian law , some U.S. gate operators are designed to “time-out” in the sa[...]

Reprogramming A Single HomeLink 姞 Button T o repr ogram a channel that has been previously trained, follow these steps: 1. Place the ignition in the RUN position. 2. Press and hold the desir ed HomeLink 威 button for 20 seconds until the EVIC display states “CHANNEL # TRAINING.” Do not release the button. 3. W ithout releasing the button, pr[...]

General Information This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: The transmitter has b[...]

W ARNING! • Never leave children in a vehicle with the key in the ignition switch (or with the ignition in the Accessory or Run position, for vehicles equipped with Keyless Go™). Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in seriou[...]

Opening Sunroof — Express Press the switch r earward and release, and the sunr oof will open automatically from any position. The sunr oof will open fully and then stop automatically . This is called “Express Open”. During Expr ess Open operation, any movement of the sunroof switch will stop the sunr oof. Closing Sunroof — Partially Press a[...]

V enting Sunroof — Express Press and r elease the V ent button in the center of the switch, and the sunroof will open to the vent position. This is called “Express V ent”, which operates regar dless of sunroof position. During Expr ess V ent operation, any movement of the sunroof switch will stop the sunr oof. Sunshade Operation The sunshade [...]

ELECTRICAL POWER OUTLETS There ar e two 12 V olt (13 Amp) electrical power outlets on this vehicle. Both of the outlets are pr otected by a fuse. The front 12 V olt power outlet has power available only when the ignition is placed in the ACC or RUN position. This power outlet will also operate a conventional cigar lighter unit. If desired, the fr o[...]

W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessori[...]

CAUTION! (Continued) • Power outlets are designed for accessory plugs only . Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Improper use of the power outlet can cause damage not covered by your warranty . CUPHOLDERS Front Cupholders The front cupholders ar e located in the center console. Illu[...]

Rear Cupholders The rear seat cupholders ar e located in the center armrest between the rear seats. The cupholders ar e positioned forward in the armr est and side-by-side to provide convenient access to beverage cans or bottles while maintaining a resting place for the r ear occupants’ el- bows. Rear Cupholders 3 UNDERST ANDING THE FEA TURES OF [...]

CONSOLE FEA TURES Sliding Center Console Armrest The center console armrest slides forwar d with three detents to provide flexibility for comfort, cupholder use and shifting ease. Console Storage The center console has a storage compartment located underneath the armrest, and also contains a 12 V olt power outlet, a molded-in coin holder (designed [...]

REAR WINDOW FEA TURES Rear Window Defroster The rear window defr oster button is located on the climate control (Mode) knob. Pr ess this button to turn on the rear window defr oster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defr oster is on. The rear window defr oster automatically[...]

CAUTION! Failure to follow these cautions can cause damage to the heating elements: • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with w[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 6 2 䡵 Instrument Cluster .................... 1 6 3 䡵 Instrument Cluster Descriptions ........... 1 6 4 䡵 Electronic V ehicle Information Center (EVIC) . . 175 ▫ Electronic V ehicle Information Center (EVIC) Displays ........................... 1[...]

䡵 Media Center 730N/430 (RER/RBZ) — AM/FM Stereo Radio And CD/DVD/HDD/ NA V — If Equipped .................... 1 9 2 ▫ Operating Instructions — V oice Command System (VR) — If Equipped ............. 1 9 2 ▫ Operating Instructions — Uconnect™ Phone — If Equipped ...................... 1 9 2 ▫ Clock Setting Procedur e — RBZ Ra[...]

▫ Play Mode ......................... 2 1 9 ▫ List Or Browse Mode ................. 2 2 1 䡵 Uconnect™ Multimedia (Satellite Radio) — If Equipped (REN/REQ/RER/RES Radios Only) ......................... 2 2 3 ▫ System Activation .................... 2 2 3 ▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) ......... 2 2 3 [...]

INSTRUMENT P ANEL FEA TURES 1 — Air Outlets 5 — Heated Seat Switch 9 — Ignition Switch 2 — Instrument Cluster 6 — ESP OFF Switch 10 — T runk Release Button 3 — Glove Compartment 7 — Hazard W arning Switch 1 1 — Headlight Switch 4 — Radio 8 — Climate Control 162 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 163[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when the ignition switch is in the ON/RUN position. 2. T rip Odometer Button Press this button to change the display fr om odometer to either of two trip odometer settings. The letter “A” or “B” will appear when in the trip odometer mode. Push[...]

7. Electronic Thr ottle Control (ETC) W arning Light This light will turn on briefly as a bulb check when the ignition switch is placed in ON/ RUN. This light will also turn on while the engine is running if ther e is a problem with the Electronic Thr ottle Control (ETC) system. If the light comes on while the engine is running, safely bring the ve[...]

CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads 240°F (1 16°C) or greater , pull over and stop the vehicle. Idle the vehicle with the air conditioner turned off until the pointer drops back into the normal range 200– 230°F (93–1 10°C). If the pointer remains at 240°F (1 16°C) or greater[...]

NOTE: • A continuous chime will sound if the vehicle is driven more than 1 mile (1.6 km) with either turn signal on. • Check for an inoperative outside light bulb if either indicator flashes at a rapid rate. 10. Airbag W arning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to th[...]

the BAS system. If this light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at speeds greater than 30 mph (48 km/h), see an authorized dealer as soon as possible. W ARNING! If the warning light remains on, the system may not be working and you will not have the benefit of ESP or BAS. Y ou shoul[...]

17. Shift Lever Indicator — Automatic T ransmission Only The Shift Lever Indicator is self-contained within the instrument cluster . It displays the gear position of the automatic transmission. 18. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 19. Odometer / Electronic V ehicle Informat[...]

press the TRIP ODOMETER button to turn of f the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the Malfunction Indicator Light (MIL). 20. Brake W arning Light This light monitors various brake functions, including brake fluid[...]

W ARNING! Driving a vehicle with the brake light on is danger- ous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have a collision. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD). In the[...]

vehicle placard or tir e inflation pressure label, you should determine the proper tir e inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a T ire Pr essure Monitoring System (TPMS) that illuminates a low tire pr essure telltale when one or more of your tir es is significantly under-inflated. Accor[...]

tires or wheels on your vehicle, to ensur e that the replacement or alternate tir es and wheels allow the TPMS to continue to function properly . CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tio[...]

24. Low Fuel Light This light will turn on and a single chime will sound when the fuel level drops to 1/8 tank. 25. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system called OBD. The OBD system monitors engine and automatic transmission control systems. The MIL will turn on when the ignit[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display that is located in the instrument cluster . This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the fol[...]

• Surround Sound modes (if equipped with Driver - Selectable Surround [DSS]) • Performance Features The system allows the driver to select information by pressing the following buttons mounted on the steering wheel. MENU Button Press and r elease the MENU button and the mode displayed will change between T rip Functions, Performance Pages, Ucon[...]

Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the EVIC displays the following messages: • T urn Signal On (with a continuous warning chime if the vehicle is driven more than 1 mile [1.6 km] with either turn signal on) • Left Front T urn Signal Light Out (with a single chime) • Left Rear T urn Si[...]

• Right Front Low Pr essure (with a single chime) • Right Rear Low Pressur e (with a single chime) • Check TPM System (with a single chime) • ESP Off • Check Gascap • Key Fob Battery Low • Service Keyless System • W rong Key • Push Button or Insert Key/T urn T o Run (refer to “Remote Starting System” in “Things T o Know Befo[...]

Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. T o turn off the message temporarily , press and release the MENU button. T o reset the oil change indica- tor system (after performing the scheduled maintenance) refer to the following pr ocedure. 1. T urn the ignition switch to the O[...]

history information will be erased, and the averaging will continue from the last fuel average r eading before the reset. Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy , accordin[...]

T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the FUNCTION SELECT button once to clear the resettable function being dis- played. T o reset all r esettable functions, press and release the FUNCTION SELECT button a second time within three seconds of r esetting the currently-displayed [...]

The Performance Features include the following: • 0-60 mph (0-100 km/h) • Braking Distance • 1/8 Mile • 1/4 Mile • Instantaneous G-Force • Peak G-Force • Digital Speedometer T o access, press and r elease the MENU button until Performance Features displays in the EVIC. Pr ess the SCROLL button to cycle through the featur es. Press the[...]

Braking Distance When selected, this screen displays the vehicle’s braking distance and the speed at which the brake pedal was depressed. • This feature will only function when applying the brakes at speeds above 30 mph (48 km/h). • Engaging the parking brake will disable this feature. • The word “READY” will flash when conditions ar e [...]

• The time and speed will continue to display until the FUNCTION SELECT button is pressed. • Pressing the FUNCTION SELECT button will clear the current r un and display the vehicle’s best 1/8 mile (1/4 mile) run. • T o clear the vehicle’s best 1/8 mile (1/4 mile) run, press and hold the FUNCTION SELECT button for five seconds. Instantaneo[...]

Keyless Enter-N-Go Display — If Equipped When the ENGINE ST ART/ST OP button is pressed to change ignition switch positions, the Keyless Enter-N-Go icon momentarily appears in the EVIC display showing the new ignition switch position. The round symbol in the middle r otates to point at the new ignition switch position. If desired, the ignition sw[...]

• V ideo Surround • Audio Surround While in the Surround Sound menu, pr ess the FUNC- TION SELECT button to change surround modes. The V ideo Surround Mode will only be available for video media sources (DVDs, V ideo CDs, or other video media supported by the radio). Compass Display The compass readings indicate the dir ection the vehicle is fa[...]

2. Press and hold the HOME button for appr oximately two seconds. 3. Press the SCROLL button until “Calibrate Compass” displays in the EVIC. 4. Press and r elease the FUNCTION SELECT button to start the calibration. The message “CAL” will display in the EVIC. 5. Complete one or more 360 degr ee turns (in an area free from lar ge metal or me[...]

2. Press and hold the HOME button for appr oximately two seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected accor ding to the map. 5. Press and r elease the HOME button to exit. Syste[...]

FUNCTION SELECT button while in this display to select English, Espanol, or Francais. Then, as you con- tinue, the information will display in the selected lan- guage. NOTE: The EVIC will not change the Uconnect™ lan- guage selection. Refer to “Uconnect™ Phone” in “Under- standing The Features Of Y our V ehicle” for further information.[...]

lock/unlock feature. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” appears. Flash Lights with Remote Key Lock When ON is selected, the front and r ear turn signals will flash when the doors are locked or unlocked with the RKE transmitter . This feature may be selected with or without the sound hor[...]

Operating” for system function and operating informa- tion. T o make your selection, press and r elease the FUNCTION SELECT button until “ON” or “OFF” appears. T urn Headlights On with Remote Key Unlock When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors ar e unlocked with the RKE [...]

MEDIA CENTER 730N/430 (RER/RBZ) — AM/FM STEREO RADIO AND CD/DVD/HDD/NA V — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The RER and RBZ radios contain a CD/DVD player , USB port, and a 30-gigabyte hard drive (HDD). Sirius Satellite Radio is optional. The 6.5 in (16.5 cm) touch screen allows for [...]

displayed. T o move the minute backward, touch the screen wher e the word “Min” with the arrow pointing downward is displayed. 5. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as f[...]

3. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 4. Select a time zone by touching the screen wher e your selection appears. If you do not see a time zone that you want to select, touch the screen wher e the word “Page” is displayed to view additional time zones in[...]

6. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the radio. 2. T ouch the screen wher e “User Clock” is displayed, the clock s[...]

4. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen wher e your selection appears. If you do not see a time zone that you want to select, touch the screen wher e the word “Page” is displayed to view additional time zones in[...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection, without stopping. T urning the ON/VOLUME control knob to the right incr ease[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL control knob clockwise to increase or counter clockwise to decrease the frequency . Setting the T one, Balan[...]

SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five s[...]

discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than [...]

If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the [...]

Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Format[...]

Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extensi[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Comman[...]

Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control kn[...]

Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL contr ol knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or [...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype 16[...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

Y ou may add a second station to each pushbutton by repeating the above pr ocedure with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into pushbutton memory . The stations stored in [...]

If you insert a disc with the ignition ON/RUN and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4–3/4 in (12 cm) discs only . The us[...]

the current selection. Pr essing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display fr om a large CD playing time display to a small CD playing time display . R W/FF Press and hold FF (Fast Forwar d) and the CD player will begin to fast forward until F[...]

Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs r ecorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor - mally . UDF and Apple HFS formats[...]

Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file. When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and[...]

Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than CD-R media • Medium formats - Multisession discs may take longer to load than non-multisession discs • Number of files and folders - Loading times will increase with mor e files and folders T o increase the speed of di[...]

Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3 player or cassette player and utilize the vehicle’s audio system to amplify the source and play thr ough the vehicle speakers. Pressing the AUX button will change the mode to auxil- iary device [...]

This feature allows an iPod 威 to be plugged into the vehicle’s sound system through a 16–pin connector , using the provided interface cable. UCI supports Mini, 4G, Photo, Nano, 5G iPod 威 and iPhone 威 devices. Some iPod 威 software versions may not fully support the UCI features. Please visit Apple’s website for software updates. NOTE: [...]

Using This Feature By using the provided connection cable to connect an iPod 威 to the vehicle’s UCI 16–pin connector port: • The iPod 威 audio can be played on the vehicle’s sound system, providing metadata (artist, track title, album, etc.) information on the radio display . • The iPod 威 can be controlled using the radio buttons to [...]

• Jump backward in the curr ent track by pressing and holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current track. • Jump forward in the curr ent track by pressing and holding the FF >> button. • A single press backward << RW or forwar d FF >> will jump backward [...]

Shuffle OFF modes for the iPod 威 .I ft h e RND icon is showing on the radio display , then the shuffle mode is ON. List Or Browse Mode During Play mode, pressing any of the buttons described below , will bring up List mode. List mode enables scrolling thr ough the list of menus and tracks on the iPod 威 . • TUNE control knob: The TUNE contr ol[...]

• Pressing a PRESET button will display the curr ent list on the top line and the first item in that list on the second line. • T o Exit List mode without selecting a track, press the same PRESET button again to go back to Play mode . • LIST button: The LIST button will display the top level menu of the iPod 威 . T urn the TUNE control knob [...]

Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, entertainment[...]

Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will display[...]

Operating Instructions - Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. SEEK Buttons Press and r elease the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the n[...]

MUSIC TYPE Button Pressing this button once will turn on the Music T ype mode for five seconds. Pressing the MUSIC TYPE button or turning the TUNE/SCROLL control knob within five seconds will allow the program format type to be se- lected. T oggle the MUSIC TYPE button again to select the music type. By pressing the SEEK button when the Music T ype[...]

pushbutton memory . The channels stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corr esponding button number will display . Button s1-6 These buttons tune the radio to the channels that you commit to pushbutton memory (12 Satellite stations). Operating Instructions - Uconnect™ Phone [...]

“Audio Surround” is optimized for fr ont seat passengers for any audio source. This surr ound effect is available for audio from any sour ce – AM/FM/CD/ Satellite Radio or AUX – and is activated through the Electr onic V ehicle Information Center (EVIC). Refer to “Driver-Selectable Surr ound Sound (DSS)” under “Electronic V ehicle Inf[...]

V ehicles equipped with steering wheel-mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC). The EVIC features a driver -interactive display which is located in the instrument cluster . VOLUME Button The VOLUME button controls the sound level of the sound system. Press the top of the VOLUME button to increase th[...]

CD/DVD DISC MAINTENANCE T o keep a CD/DVD in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge. 3. Do not apply paper or tape to the disc; avoid scratch- ing the disc. 4. Do not use solvents such as be[...]

CLIMA TE CONTROLS Manual Air Conditioning and Heating System The controls for the manual system in this vehicle contain a series of outer rotary dials and inner push knobs. These comfort controls can be set to obtain desir ed interior conditions. Front Blower Control There ar e four blower speeds. Use this control to r egulate the amount of air for[...]

T emperature Control Use this control to r egulate the tem- perature of the air inside the passenger compartment. Rotating the knob coun- terclockwise, fr om top center into the blue area indicates cooler tempera- tures. Rotating the knob clockwise, into the red ar ea, indicates warmer temperatures. NOTE: If your air conditioning performance seems [...]

Bi-Level Mode Air is directed thr ough the panel and floor outlets. NOTE: There is a dif ference in temperature (in any conditions other than full cold or full hot), between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives impr oved comfort during sunny but cool conditions. Floor Mode Air i[...]

NOTE: • If the RECIRCULA TION button is pressed when the system is in MIX, DEFROST , or FLOOR mode the RECIRCULA TION LED indicator will flash 3 times and then turn off to indicate RECIRCULA TION mode is not allowed. • Continuous use of the RECIRCULA TION mode may make the inside air stuffy and window fogging may occur . Extended use of this mo[...]

Max A/C For maximum cooling use the A/C and RECIRCULA- TION mode buttons at the same time. Remote Start — If Equipped During remote start operation, the climate contr ol soft- ware may override the climate contr ol settings depend- ing on the outside ambient temperature. The table below explains the differ ent scenarios that could occur during re[...]

Operating Tips NOTE: Refer to the chart at the end of this section for suggested control settings for various weather condi- tions. Summer Operation The engine cooling system in air-conditioned vehicles must be protected with a high-quality antifr eeze coolant to provide pr oper corrosion protection and to pr otect against engine overheating. A sol[...]

Side W indow Demisters A side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets dir ect air toward the side windows when the system is in the Floor , Mix, or Defrost mode. The air is directed at the ar ea of the windows through which you view the outside mirrors. Outside Air Intake Make sure the air[...]

Control Setting Suggestions for V arious W eather Conditions 238 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 4 3 ▫ Manual T ransmission – If Equipped ....... 2 4 3 ▫ Automatic T ransmission – If Equipped ..... 2 4 4 ▫ Keyless Go™ ....................... 2 4 5 ▫ Normal Starting ..................... 2 4 6 ▫ Extreme Cold W eather (Below −20°F Or −29°C) ..[...]

▫ Five-Speed Automatic T ransmission ....... 2 6 0 ▫ Gear Ranges ........................ 2 6 0 䡵 AutoStick 威 .......................... 2 6 4 ▫ Operation ......................... 2 6 4 ▫ General Information .................. 2 6 5 䡵 Driving On Slippery Surfaces ............. 2 6 5 ▫ Acceleration ........................ 2 6 5 ▫[...]

䡵 T ire Safety Information ................. 2 8 6 ▫ T ire Markings ....................... 2 8 6 ▫ T ire T erminology And Definitions ......... 2 9 1 ▫ T ire Loading And T ire Pressur e .......... 2 9 2 䡵 T ires — General Information ............. 2 9 6 ▫ T ire Pr essure ....................... 2 9 6 ▫ T ire Inflation Pr essures ..[...]

▫ Fuel System Cautions ................. 3 1 3 ▫ Carbon Monoxide W arnings ............ 3 1 4 䡵 Adding Fuel ......................... 3 1 5 ▫ Fuel Filler Cap (Gas Cap) .............. 3 1 5 ▫ Loose Fuel Filler Cap Message ........... 3 1 7 䡵 V ehicle Loading ...................... 3 1 7 ▫ V ehicle Certification Label .............. 3 1[...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or othe[...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. Unburned fuel could enter the catalytic con- verter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to obtain a start from another vehicle. This type of start can be dangerous if [...]

Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST ART position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 [...]

NOTE: The ENGINE ST ART/ST OP button should only be removed or inserted with the ignition in the OFF position. Normal Starting Using the ENGINE ST AR T/STOP Button – Automatic T ransmission Only NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. T o start the engine, the transmis[...]

2. The ignition switch will return to the OFF position. 3. If the shift lever is not in P ARK, the ENGINE ST ART/ STOP button must be held for two seconds and vehicle speed must be above 5 mph (8 km/h) before the engine will shut off. The ignition switch position will r emain in the ACC position until the shift lever is in P ARK and the button is p[...]

• If the vehicle speed is above 5 mph (8 km/h), the ENGINE ST ART/ST OP button must be held for two seconds before the engine will shut of f. The ignition switch position will remain in the ACC position until the vehicle is stopped and the button is pressed twice to the OFF position. Keyless Go™ Functions – W ith Driver ’ s Foot OFF the Bra[...]

If Engine Fails T o Start W ARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury . • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- mission cann[...]

the way to the floor and hold it, then press and hold the ENGINE ST ART/ST OP button for no more than 15 sec- onds. Release the accelerator pedal and the clutch pedal, wait 10 to 15 seconds, then repeat the “Normal Starting” procedur e. Clearing A Flooded Engine (Using Fob W ith Integrated Key) If the engine fails to start after you have follow[...]

The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine. W ARNING! Remember to disconnect the engine block heater cord before driving. Damage to the 1 10-115 V olt electrical cord could cause electrocution. MANUAL TRANSMISSION — IF EQUIPPED Six-Speed Manual T ransmission W ARNING! Y ou or othe[...]

NOTE: During cold weather , you may experience in- creased ef fort in shifting until the transmission fluid warms up. This is normal. Shifting Fully press the clutch pedal befor e shifting gears. As you release the clutch pedal, lightly pr ess the accelerator pedal. The six-speed manual transmission has a spring that centers the shift lever near th[...]

CAUTION! Always make sure the vehicle comes to a complete stop before shifting into REVERSE. Failure to do so may result in transmission damage. Y ou must always use first gear (or Reverse) when starting from a standing position. Recommended Shift Speeds T o utilize your manual transmission efficiently for fuel economy , it should be upshifted as l[...]

with the clutch engaged (clutch pedal released), but it may also be heard when driving at low engine RPM. Also, this may be more noticeable when the transmis- sion is warm. This is a normal condition and is not an indication of a problem with your clutch or transmission. 1–4 Skip Shift There ar e times when you must shift the transmission directl[...]

CAUTION! • If you skip more than one gear while downshift- ing or downshift at too high an engine speed, you could damage the engine, transmission, or clutch. • Do not downshift into first gear when the vehicle is moving faster than 15 mph (24 km/h), as you could damage the engine and/or clutch. AUTOMA TIC TRANSMISSION — IF EQUIPPED CAUTION! [...]

W ARNING! It is dangerous to move the shift lever out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in reverse. Y ou could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normal[...]

• The electronically-contr olled transmission provides a precise shift schedule. The transmission electr onics are self-calibrating. Therefor e, the first few shifts on a new vehicle may be somewhat abrupt or soft until after the break-in period. This is a normal condition, and pr e- cision shifts will develop within a few shift cycles. The shift[...]

Over-T emperature Mode The transmission electronics constantly monitor the transmission oil temperature. If the transmission exceeds normal operating temperature, the transmission will change the way it shifts to help control the condition. This may result in a slightly dif ferent feeling or response during normal operation in DRIVE position. After[...]

1. T urn the ignition switch to the ACC or ON position (RUN position with Keyless Go™) without starting the engine. 2. Firmly set the parking brake. 3. Press and maintain firm pr essure on the brake pedal. 4. Using the screwdriver , press and hold the override tab through the access port on the center console. 5. Move the shift lever into the NEU[...]

W ith Keyless Go™ If the engine is running, pr ess the ST ART/ST OP button to turn it off. Release the brake pedal and pr ess the ST AR T/ STOP button once or twice to go to the ACC or RUN position. Do not start the engine. Then, follow the in- structions shown above to activate the override. Five-Speed Automatic T ransmission Shifting from DRIVE[...]

When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK. As an adde[...]

REVERSE This range is used for moving the vehicle rearwar d. Always stop before moving the shift lever to REVERSE. NEUTRAL This range is used when the vehicle is standing for prolonged periods with the engine r unning. The engine may be started in this range. Set the parking brake if you must leave the vehicle. CAUTION! Coasting the vehicle or driv[...]

under heavy loading conditions (in hilly terrain, travel- ing into strong head winds, or while towing heavy trailers, use the AutoStick 威 mode and select the “3” range. Delayed Shifts in Cold T emperatures During cold temperature operation, you may notice delayed upshifts depending on engine and transmission temperature as well as vehicle spe[...]

NOTE: Even if the transmission can be reset, we r ecom- mend that you visit your authorized dealer at your earliest possible convenience. Y our authorized dealer has diagnostic equipment to determine if the problem could recur . Have the transmission checked at your authorized dealer as soon as possible. If the problem has been momentary , the tran[...]

Y ou can shift in or out of the AutoStick 威 mode at any time without taking your foot off the accelerator pedal. When you wish to engage AutoStick 威 , simply move the shift lever to the right (D+) or left (D-) while in the DRIVE position. The transmission will remain in the curr ent gear until an upshift or downshift is chosen. When you wish to[...]

W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have a collision. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.). T raction When driving on wet or slu[...]

CAUTION! • Due to lower ground clearance, driving your ve- hicle up steep driveways, approach ramps or near parking blocks may cause damage to the front fascia and ground effects. • Driving through snow more than 4 inches (100 mm) deep may cause damage to the front fascia and ground effects. Flowing/Rising W ater W ARNING! Do not drive on, or c[...]

CAUTION! • Always check the depth of the standing water before driving through it. Never drive through standing water that is deeper than the bottom of the tire rims mounted on the vehicle. • Determine the condition of the road or the path that is under water , and if there are any obstacles in the way , before driving through the standing wate[...]

W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stop- ping distances. Therefore, after driving through standing water , drive slowly and[...]

system. This noise should be considered normal, and it does not in any way damage the steering system. W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolonged operation of the steering system at the end of the steering wheel [...]

If necessary , add fluid to restore to the pr oper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. P ARKING BRAKE Before leaving the vehicle, make sur e that the parking brake is fully applied and place t[...]

Manual T ransmission – If Equipped The foot operated parking brake is positioned below the lower left corner of the instrument panel. T o r elease the parking brake, pull the parking brake release handle. Automatic T ransmission – If Equipped The foot operated parking brake is located below the lower left corner of the instrument panel. T o app[...]

W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be ser[...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. There will be some loss of overall braking effectiveness. This may be evident by increased pedal travel during application, gr eater pedal force r equired to slow or sto[...]

Y ou also may experience the following when the brake system goes into Anti-Lock: • The ABS motor running (it may continue to run for a short time after the stop), • The clicking sound of solenoid valves, • Brake pedal pulsations, and • A slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristic[...]

W ARNING! (Continued) • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded. • The Anti-Lock Brake System (ABS) cannot prevent collisions, includin[...]

If both the “Brake W arning Light” and the “ABS W arning Light” remain on, the ABS and EBD systems are not functioning. Immediate repair to the ABS system is requir ed. ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system commonly r eferred to as ESP . This system includes the Anti-Lock [...]

T raction Control System (TCS) This system monitors the amount of wheel spin of each driven wheel. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to pr ovide enhanced acceleration and stability . A feature of the TCS system functions similar to a limited-slip differ ential and controls the[...]

W ARNING! The BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The BAS cannot prevent accidents, including those re- sulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. The capa- bilities of a BAS-equipped vehicl[...]

W ARNING! There may be situations on minor hills (i.e., less than 8%), with a loaded vehicle, or while pulling a trailer , when the system will not activate and slight rolling may occur . This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle. Disabling/Enabling HSA If you wish[...]

8. Rotate the steering wheel back to center and then an additional half-turn to the right. 9. T urn the ignition switch to the OFF position and then back to the ON position. If the sequence was completed properly , the “ESP/TCS Indicator Light” will blink sev- eral times to confirm HSA is disabled. 10. Repeat these steps if you want to return t[...]

accelerator and apply as little throttle as possible. Be sur e to adapt your speed and driving to the prevailing r oad conditions. W ARNING! The ESP cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. The ESP cannot prevent accidents, including those result-[...]

switch and the “ESP/TCS Indicator Light” will illumi- nate. T o turn the ESP ON again, momentarily pr ess the “ESP OFF” switch and the “ESP/TCS Indicator Light” will turn off. NOTE: T o improve the vehicle’s traction when driving with snow chains, or when starting off in deep snow , sand, or gravel, it may be desirable to switch to th[...]

“Electronic V ehicle Information Center (EVIC)” in “Un- derstanding Y our Instrument Panel” for further informa- tion. T o turn ESP ON again, momentarily pr ess the “ESP OFF” switch. NOTE: The ⬙ ESP OFF ⬙ message will display and the audible chime will sound when the shift lever is moved into the P ARK position from any position oth[...]

Synchronizing ESP The Malfunction Indicator Light for the ESP is combined with BAS indicator . If the power supply is interrupted (battery disconnected or discharged), the “ESP/BAS Malfunction Indi- cator Light” may illuminate with the engine running. If this should occur , turn the steering wheel completely to the left and then to the right. T[...]

NOTE: • The “ESP/TCS Indicator Light” and the “ESP/BAS Malfunction Indicator Light” will turn on momen- tarily each time the ignition switch is turned ON. • Each time the ignition is turned ON, the ESP System will be ON even if it was turned OFF previously . • The ESP Contr ol System will make buzzing or clicking sounds when it is act[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standard have the tire size molded into the sidew[...]

=T ire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary spare tir e 31 = Overall diameter in inches (in) 215 = Section width in millimeters ([...]

TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should [...]

T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) running from the sill to the r oof. Cold T ire Pressure Cold tire inflation pr essure is defined as the tire pr essure after the vehicle has not been driven for at leas[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size des[...]

axles must not be exceeded. For further information on GA WRs, vehicle loading, and trailer towing, refer to “V ehicle Loading” in this section. T o determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on the T ire and Loading Infor[...]

NOTE: • The following table shows examples on how to calcu- late total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and size of occupants. This table is for illustration purposes only and may not be accurate for the seating and load carry capacity of your vehicle. • For the following [...]

5 ST ARTING AND OPERA TING 295[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressure is essential to the safe and satisfactory o[...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “cold tire inflation pr essure.” Cold tire inflation pr essure is defined as the tire pr es[...]

loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) for more than 30 seconds continu- ously when you are stuck, and do not let anyone near a spinning wheel, no matte[...]

Life Of Tire The service life of a tire is dependent upon varying factors including, but not limited to: • Driving style • T ire pr essure • Distance driven W ARNING! T ires and the spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could los[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

SNOW TIRES Some areas of the country r equire the use of snow tires during the winter . Standard tires ar e of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire sidewall. If you need snow tires, select tir es equivalent in size and type to the original equipment tires. Use snow tir es only in sets of [...]

Tire Rotation – Four Season/RSA Tires The suggested rotation method for vehicles equipped with all season tires is the “forwar d-cross” as shown in the following diagram. Tire Rotation – F1 Three Season T ires The suggested rotation method is the “side-to-side” as shown in the following diagram. This method is requir ed due to differ en[...]

TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pr essure Monitor System (TPMS) will warn the driver of a low tire pr essure based on the vehicle recom- mended cold placard pr essure. The tire pr essure will vary with temperature by about 1 psi (6.9 kPa) for every 12°F (6.5°C). This means that when the outside temperature decr eases, the tire press[...]

For example, your vehicle may have a recommended cold (parked for more than thr ee hours) placard pressur e of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressure is 27 psi (186 kPa), a temperature dr op to 20°F (-7°C) will decrease the tire pressur e to approximately 23 psi (158 kPa). This tire pressur e[...]

NOTE: • The TPMS is not intended to replace normal tir e care and maintenance or to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure. • Driving on a significantly under-inflated tir e causes the tire to over heat and can lead to tire failure. Under-inf[...]

• V arious TPMS messages, which display in the Elec- tronic V ehicle Information Center (EVIC), and • TPM T elltale Light T ire Pressure Monitoring Low Pressure W arnings The “TPM T elltale Light” will illuminate in the instrument cluster and a chime will sound when tire pr essure is low in one or more of the four active road tir es. In add[...]

will turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning If a system fault is detected, the “TPM T elltale Light” will flash on and off for 75 seconds and then r emain on solid. The system fault will also sound a chime. In addition, the EV[...]

1. Signal interference due to electr onic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. 3. Accumulation of snow or ice around the wheels or wheel housings. 4. Using wheels/tires not equipped with TPM se[...]

Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experi- ence these symptoms, try another brand of gasoline before considerin[...]

CAUTION! Do not use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system components. Problems that r esult from using methanol/gasoline or E85 ethanol blends are not the r esponsibility of the manufacturer . While MTBE is an oxygenate made from methano[...]

MMT In Gasoline MMT is a manganese-containing metallic additive that is blended into some gasoline to increase octane. Gasoline blended with MMT provides no performance advantage beyond gasoline of the same octane number without MMT . Gasoline blended with MMT reduces spark plug life and reduces emissions system performance in some vehicles. The ma[...]

CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition malfunctions can cause the catalytic converter to overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. Contact your authorized dealer for service assistance. • The use of fue[...]

W ARNING! (Continued) • Guard against carbon monoxide with proper maintenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnor- mal conditions repaired promptly . Until repaired, drive with all side windows fully open. • Keep the trunk closed when driving your vehicle to prevent carbon monoxide and other poiso[...]

CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the “Malfunc- tion Indicator Light (MIL)” to turn on. • T o avoid fuel spillage and overfilli[...]

• When the fuel nozzle “clicks” or shuts off, the fuel tank is full. Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “Check Gascap” message will display in the Electronic V ehicle Information Center (EVIC). If this occurs, tighten the fuel fil[...]

• T ype of V ehicle • Month Day and Hour of Manufacture (MDH) The bar code allows a computer scanner to read the VIN. Gross V ehicle Weight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, and cargo. The total load must be limited so that you do not exceed the GVWR. Gross Axle Weight Ratin[...]

Figure out the weight on the fr ont and rear of the vehicle separately . It is important that you distribute the load evenly over the front and r ear axles. Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s GVWR. Loading T o load your ve[...]

The parking brake must be firmly engaged and the wheels chocked during driveshaft removal and installa- tion. The parking brake must remain engaged unless the vehicle is securely and pr operly connected to the tow vehicle, or the driveshaft is completely reinstalled. See your authorized dealer for proper driveshaft r emoval and reinstallation pr oc[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 2 2 䡵 If Y our Engine Overheats ................ 3 2 2 䡵 TIREFIT Kit ......................... 3 2 3 ▫ TIREFIT Storage ..................... 3 2 4 ▫ TIREFIT Kit Components And Operation . . . 324 ▫ TIREFIT Usage Precautions ............. 3 2 6 ▫ Sealing [...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the switch bank near the bottom center of the instrument panel. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency . Press the switch a second tim[...]

• Y ou can also turn the temperature contr ol to maximum heat, the mode control to floor and the blower contr ol to high. This allows the heater core to act as a supplement to the radiator and aids in removing heat from the engine cooling system. CAUTION! Driving with a hot cooling system could damage your vehicle. If the temperature gauge reads [...]

TIREFIT Storage The TIREFIT kit is located in the trunk. TIREFIT Kit Components and Operation 1. Sealant Bottle 2. Deflation Button — If Equipped 3. Pressur e Gauge 4. Power Button TIREFIT Location 324 WHA T TO DO IN EMERGENCIES[...]

5. Mode Select Knob 6. Sealant Hose (Clear with Y ellow Cap) 7. Air Pump Hose (Black) 8. Power Plug Using the Mode Select Knob and Hoses Y our TIREFIT kit may be equipped with either of the following symbols to indicate the air or sealant mode. Selecting Air Mode T urn the Mode Select Knob (5) to this position for air pump operation only . Use the [...]

TIREFIT Usage Precautions • Replace the TIREFIT Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the sys- tem. Refer to “Sealing a T ire with TIREFIT” section (F) “Sealant Bottle and Hose Replacement”. • The Sealant Bottle (1) and Sealant Hose (6) is a one [...]

W ARNING! (Continued) • Do not use TIREFIT or drive the vehicle under the following circumstances: − If the cut or puncture in the tire tread is approxi- mately 0.24 in. (6 mm) or larger . − If the tire has any sidewall damage. − If the tire has any damage from driving with extremely low tire pressure. − If the tire has any damage from dr[...]

W ARNING! (Continued) • TIREFIT Sealant solution contains latex. In case of allergic reaction or rash, consult a physician im- mediately . Keep TIREFIT out of reach of children. If swallowed, rinse mouth immediately with plenty of water and drink plenty of water . Do not induce vomiting! Consult a physician immedi- ately . • Use the gloves prov[...]

3. Uncoil the Sealant Hose (6) and then remove the yellow cap from the fitting at the end of the hose. 4. Place the TIREFIT kit flat on the ground next to the deflated tire. 5. Remove the cap from the valve stem and then scr ew the fitting at the end of the Sealant Hose (6) onto the valve stem. 6. Uncoil the Power Plug (8) and then insert the plug [...]

2. Connect the Power Plug (8) to a differ ent 12 V olt power outlet in your vehicle or another vehicle, if avail- able. Make sure the engine is r unning before turning ON the TIREFIT kit. 3. The Sealant Bottle (1) may be empty due to previous use. Call for assistance. NOTE: If the Mode Select Knob (5) is on air mode and pump is operating, air will [...]

If the tire inflates to the recommended pressure or is at least 26 psi (1.8 Bar) pressure within 15 minutes: 1. Press the Power Button (4) to turn of f the TIREFIT kit. 2. Remove the Speed Limit sticker from the top of the Sealant Bottle (1) and place the sticker on the instrument panel. 3. Immediately disconnect the Sealant Hose (6) from the valve[...]

W ARNING! TIREFIT is not a permanent flat tire repair . Have the tire inspected and repaired or replaced after using TIREFIT . Do not exceed 55 mph (88 km/h) until having the tire repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. (E) After Securing T[...]

4. Have the tire inspected and r epaired or replaced at the earliest opportunity at an authorized dealer or tire ser - vice center . 5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as possible. Refer to “(F) Sealant Bottle and Hose Replacement.” NOTE: When having the tire serviced advise the aut[...]

JUMP-ST ARTING PROCEDURES If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done impr operly so please follow the procedur es in this section carefully . NOTE: When using a portable battery boos[...]

Remote Battery Posts W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. •[...]

3. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF . W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure W ARNING! Failure to follow this [...]

W ARNING! Do not connect the cable to the negative post (-) of the discharged battery . The resulting electrical spark could cause the battery to explode and could result in personal injury . 5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the dischar[...]

FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand, or snow , it can often be moved by a rocking motion. T urn your steering wheel right and left to clear the area ar ound the front wheels. Then shift back and forth between RE- VERSE and DRIVE. Using minimal accelerator pedal pressur e to maintain the rocking motion, without spin- n[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping when you are stuck and do not[...]

If the transmission is not operative or if the vehicle is to be towed more than 15 miles (24 km) or faster than 30 mph (48 km/h), the vehicle must be transported using a flatbed truck. CAUTION! • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • If the transmission is n[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 6.1L ............. 3 4 3 䡵 Onboard Diagnostic System — OBD II ...... 3 4 4 ▫ Loose Fuel Filler Cap ................. 3 4 4 䡵 Emissions Inspection And Maintenance Programs ............................ 3 4 5 䡵 Replacement Parts ..................... 3 4 6 䡵 Dealer Service .....[...]

▫ Clutch Hydraulic System (Manual T ransmission) – If Equipped ............. 3 6 6 ▫ Manual T ransmission – If Equipped ....... 3 6 6 ▫ Automatic T ransmission – If Equipped ..... 3 6 7 ▫ Rear Axle .......................... 3 6 8 ▫ Appearance Care And Protection From Corrosion .......................... 3 6 9 䡵 Fuses ............[...]

ENGINE COMP ARTMENT — 6.1L 1 — Remote Jump Start (Positive Battery Post) 6 — Power Steering Fluid Reservoir 2 — Integrated Power Module 7 — Air Cleaner Filter 3 — Coolant Pressur e Cap 8 — Engine Oil Fill 4 — Brake Fluid Reservoir Access Cover 9 — Engine Oil Dipstick 5 — Engine Coolant Reservoir 10 — W asher Fluid Reservoir 7 [...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

T rip Odometer button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started. A loose, improperly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of this vehi[...]

5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all a[...]

DEALER SERVICE Y our authorized dealer has the qualified service person- nel, special tools, and equipment to perform all service operations in an expert manner . Service manuals are available which include detailed service information for your vehicle. Refer to these service manuals before attempting any procedur e yourself. NOTE: Intentional tamp[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transmission, power steering or air condi- tioning. Such damage is not covered [...]

NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, whichever occurs first. Engine Oil Selection For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the requir ements of Chrysler Material Standard[...]

environment. Contact your authorized dealer , service station, or governmental agency for advice on how and where used oil and oil filters can be safely discar ded in your area. Engine Oil Filter The engine oil filter should be replaced with a new filter at every engine oil change. Engine Oil Filter Selection This manufacturer’s engines have a fu[...]

Engine Air Cleaner Filter Selection The quality of replacement engine air cleaner filters varies considerably . Only high quality filters should be used to assure most ef ficient service. MOP AR 威 engine air cleaner filters are a high quality filter and ar e recommended. Maintenance-Free Battery Y our vehicle is equipped with a maintenance-free b[...]

W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water . • Battery gas is flammable and explosive. Kee[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. CAUTION! Do not use chemical flushes in yo[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor o- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product. How- ever , the manufacturer recommends that air conditioning service be performed by authorized dealers or other service facilities using recovery and r ecycl[...]

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. A void using the wiper blades to remove fr ost or ice from the windshield. Keep the blade rubber out of contact with petroleum pr oducts such as engine oil, ga[...]

W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sou[...]

CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions con- trol device and may seriously reduce engine per- formance and cause serious damage to the engine. • Damage to the catalytic converter can result if your vehicle is not kept in proper o[...]

T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interr upt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagno[...]

Coolant Checks Check the engine coolant (antifreeze) pr otection every 12 months (before the onset of fr eezing weather , where applicable). If coolant is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh coolant. Check the fr ont of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty , c[...]

CAUTION! • Mixing of coolants other than specified HOA T engine coolants may result in engine damage and may decrease corrosion protection. If a non-HOA T coolant is introduced into the cooling system in an emergency , it should be replaced with the speci- fied coolant as soon as possible. • Do not use plain water alone or alcohol-based engine [...]

• Mix a minimum solution of 50% HOA T engine coolant and distilled water . Use higher concentrations (not to exceed 70%) if temperatures below −34°F (−37°C) ar e anticipated. • Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water will r[...]

W ARNING! (Continued) • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result. Disposal of Used Coolant Used ethylene glycol-based engine coolant is a regulated substance requiring pr oper disposal. Check with your local authorities to determine the disposal rules for your community[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bottle. • Check the [...]

Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Refer to “Maintenance Schedule” for further information. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally hi[...]

W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter or moisture. Clutch Hydraulic[...]

Automatic T ransmission – If Equipped Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this reason, the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level. CAUTION! • Using a transmission fluid other than the manufac- t[...]

Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor - mance. Use only manufacturer ’s recommended transmis- sion fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further informa- tion. It is important that the transmis[...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and chemicals that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your [...]

• Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax or equivalent to remove r oad film, stains and to protect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! • Do not use abrasive or strong cleaning ma[...]

• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR 威 T ouch Up Paint or equivalent on scratches as soon as possible. Y our authorized dealer has[...]

• For grease stains, apply MOP AR 威 Multi-Purpose Cleaner or equivalent to a clean, damp cloth and remove the stain. Use a fr esh, damp towel to remove soap residue. • Do not use any harsh solvents or any other form of protectants on Stain Repel pr oducts. Interior Care Use MOP AR 威 Fabric Cleaner or equivalent to clean fabric upholstery an[...]

Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass; and ther efore, differ ent lens cleaning procedures must be followed. T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with[...]

Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use MOP AR 威 T otal Clean or equivalent, a mild soap solution, or lukewarm water . Do not remove the belts fr om the vehicle to wash them. Replace[...]

CAUTION! • When installing the integrated power module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the integrated power module and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the [...]

Cavity Car- tridge Fuse Mini- Fuse Description 9 ——— 10 30 Amp Pink — W indshield W iper 1 1 30 Amp Pink — Anti-Lock Brake System (ABS) V alves 12 40 Amp Green — Radiator Fan Lo/High 13 50 Amp Red — Anti-Lock Brake System (ABS) Pump Motor 1 4——— 15 50 Amp Red — Radiator Fan Cavity Car- tridge Fuse Mini- Fuse Description 1 6—[...]

Rear Power Distribution Center There is also a power distribution center located in the trunk under the spar e tire access panel. This center contains fuses and relays. Access Panel Rear Power Distribution Center 7 MAINT AINING YOUR VEHICLE 377[...]

CAUTION! • When installing the power distribution center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the power distribution center and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having [...]

Cavity Car- tridge Fuse Mini- Fuse Description 5 30 Amp Pink — Heated Seats – If Equipped 6 — 20 Amp Y ellow Fuel Pump 7 — 15 Amp Blue Sub Amp – If Equipped 8 — 15 Amp Blue Diagnostic Link Connec- tor (DLC)/W ireless Con- trol Module (WCM)/ W ireless Ignition Node (WIN) 9 — 20 Amp Y ellow Power Outlet 1 0——— 11 * ——— 12 * [...]

Cavity Car- tridge Fuse Mini- Fuse Description 2 3——— 2 4——— 2 5——— 2 6——— 27 — 10 Amp Red Occupant Restraint Con- troller (ORC) 28 — 10 Amp Red Ignition Run, AC Heater Control/Occupant Re- straint Controller (ORC) 29 — 5 Amp Orange Cluster/Electronic Sta- bility Program (ESP)/ Powertrain Control Module (PCM)/STOP LIGH[...]

Cavity Car- tridge Fuse Mini- Fuse Description 38 — 10 Amp Red Cargo Light/V ehicle In- formation Module – If Equipped 39 — 10 Amp Red Heated Mirrors – If Equipped 40 — 5 Amp Orange Auto Inside Rearview Mirror/Heated Seats – If Equipped/Switch Bank 4 1——— 42 30 Amp Pink — Front Blower Motor 43 30 Amp Pink — Rear W indow Defros[...]

in the fresh air and high blower setting. This will ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT BULBS LIGHT BULBS – Interior Bulb Number Rear Courtesy/Reading Lamps ............. W 5 W Rear Compartment (T runk) Lamp ............. 5 6 2 Overhead Console Reading L[...]

BULB REPLACEMENT Low Beam Headlamp, High Beam Headlamp, Park/T urn Lamp — Models with Halogen Headlamps — If Equipped See your authorized dealer for bulb replacement. Low Beam Headlamp, High Beam Headlamp, and Park/T urn Lamp — Models with High Intensity Discharge (HID) Headlamps — If Equipped HID Headlamps The headlamps are a type of high [...]

NOTE: • If a screwdriver is used, make sur e a soft material is placed between the vehicle body and tool so not to scratch the paint. 2. Rotate the bulb’s socket counterclockwise, and r emove the bulb and socket assembly from the housing. 3. Pull the bulb out of the socket and insert the replace- ment bulb. 4. Install the bulb and socket assemb[...]

3. Remove the fasteners from the back of the tail lamp assembly . 4. Pull back the trunk liner . 5. Remove the remaining fasteners fr om the back of the tail lamp assembly . 6. Pull the tail lamp assembly clear from the vehicle to access the bulbs. 7. Push the electrical connector locking tab to the side. 8. Disconnect the electrical connector . 7 [...]

9. T urn the appropriate bulb and socket assembly coun- terclockwise to r emove it from the tail lamp assembly . 10. Disconnect the bulb from the socket assembly and install the replacement bulb. 1 1. Reinstall the bulb and socket assembly into the tail lamp assembly , and then turn it clockwise. 12. Reinstall the tail lamp assembly , fasteners, el[...]

Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately . The CHMSL must be r eplaced as an assembly , see your authorized dealer . License Lamp 1. Remove the screws securing the lamp to the r ear fascia. 2. Remove the bulb and socket assembly . 3. Disconnect the bulb fr om the socket assembly and install [...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) 19 Gallons 72 Liters Engine Oil with Filter 6.1 Liter Engine (SAE 5W -40, API Certified) 7 Quarts 6.6 Liters Cooling System * 6.1 Liter Engine (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent) 15 Quarts 14.4 Liters * Includes heater and coolant recovery bottle filled to MAX l[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil For best performance and maximum protection under all types of operat- ing conditions, the manufacturer only r eco[...]

Chassis Component Fluid, Lubricant, or Genuine Part Manual T ransmission – If Equipped MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Automatic T ransmission – If Equipped MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Brake Master Cylinder MOP AR ?[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 9 2 䡵 Maintenance Schedule .................. 3 9 2 ▫ Required Maintenance Intervals .......... 3 9 4 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emission Contr ol System. These, and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliabilit[...]

NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been six months since your last oil change, even if the oil change indicator message is NOT illuminated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • U[...]

• Check the fluid levels of the coolant reservoir , brake master cylinder , and power steering, and add as needed. • Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 36,000 Mil[...]

42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 8 M A I N T E N A N C E S C H E D U L E S 398 MAINTENANCE SCHEDULES[...]

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary . ❏ Inspect the brake linings, and replace if necessary . ❏ Inspect the CV join[...]

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil an[...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Inspect and replace the PCV V alve if necessary .* ❏ Inspect the rear axle fluid. ❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. Odomete[...]

102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the spark plugs. ❏ Flush and replace the engine coolant if not done at 60 months. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 108,000 Miles (180,000 km) or [...]

1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ [...]

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Inspect the rear axle fluid. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine o[...]

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 8 M A I N T E N A N C E S C H E D U L E S MAINTENANCE SCHEDULES 407[...]

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ If you are using your vehicle in dusty or off-road conditions, inspect the engine air cleaner filter , and replace if necessary . ❏ Inspect the brake linings, and replace if necessary . ❏ Inspect the CV j[...]

* This maintenance is recommended by the manufactur er to the owner , but is not required to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, tak[...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 1 3 ▫ Prepar e For The Appointment ........... 4 1 3 ▫ Prepar e A List ...................... 4 1 3 ▫ Be Reasonable W ith Requests ............ 4 1 3 䡵 If Y ou Need Assistance ................. 4 1 3 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 4 1 7 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 1 9 ▫ T readwear ......................... 4 1 9 ▫ T raction Grades ..................... 4 1 9 ▫ T emperature Grades .................. 4 2 0 412 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its customer center . Any hearing or speech impair ed customer , who has access to a TDD or a conventional teletypewriter (TTY) in th[...]

W e appreciate that you have made a major investment when you purchased the vehicle. An authorized dealer has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or related concerns.[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and remedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Auto[...]

LLC vehicles. A complete working knowledge of the vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and te[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to F[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe tir[...]

INDEX 10[...]

About Y our Brakes .................... 271,274 ABS (Anti-Lock Brake System) ............ 274,277 Adding Engine Coolant (Antifreeze) .......... 3 6 0 Adding Fuel ........................... 3 1 5 Adding W asher Fluid ..................... 3 5 5 Additives, Fuel ......................... 3 1 3 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 35[...]

Automatic Headlights .................... 1 2 9 Automatic T ransaxle Special Additives ...................... 3 6 8 Automatic T ransmission ................ 260,367 Adding Fluid ...................... 367,390 Autostick ............................ 2 6 4 Fluid and Filter Changes ................. 3 6 7 Fluid Change ......................... 3 6 7 Fl[...]

Bulbs, Light .......................... 76,382 Calibration, Compass ..................... 1 8 6 Capacities, Fluid ........................ 3 8 8 Caps, Filler Fuel ............................... 3 1 5 Oil (Engine) .......................... 3 4 9 Power Steering ........................ 2 7 0 Radiator (Coolant Pressur e) ............... 3 6 1 Car W [...]

Console, Overhead ....................... 1 4 1 Contract, Service ........................ 4 1 5 Coolant Pressur e Cap (Radiator Cap) .......... 3 6 1 Cooling System ......................... 3 5 8 Adding Coolant (Antifreeze) .............. 3 6 0 Coolant Capacity ...................... 3 8 8 Coolant Level ...................... 359,362 Disposal of [...]

Door Locks, Automatic .................... 3 1 Door Opener , Garage ..................... 1 4 2 Driving On Slippery Surfaces ................... 2 6 5 Through Flowing, Rising, or Shallow Standing W ater ........................ 2 6 6 Electric Remote Mirrors .................... 8 3 Electrical Power Outlets ................... 1 5 2 Electronic Brake[...]

Oil Change Interval .................... 3 4 8 Oil Filler Cap ......................... 3 4 9 Oil Filter ............................ 3 5 0 Oil Filter Disposal ..................... 3 4 9 Oil Selection ....................... 349,388 Overheating .......................... 3 2 2 Starting ............................. 2 4 3 T emperature Gauge .......[...]

Fluids ................................ 3 8 9 Fluids, Lubricants and Genuine Parts .......... 3 8 9 Fog Lights .......................... 130,169 Folding Rear Seat ........................ 1 2 6 Freeing A Stuck V ehicle ................... 3 3 8 Fuel ................................. 3 1 0 Adding ............................. 3 1 5 Additives ......[...]

GVWR ............................... 3 1 8 Hands-Free Phone (Uconnect™) .............. 8 5 Hazard Driving Through Flowing, Rising, or Shallow Stand- ing W ater ............................ 2 6 6 Hazard W arning Flasher ................... 3 2 2 Head Restraints ......................... 1 2 2 Headlight W ashers ....................... 3 5 5 Headli[...]

Instrument Cluster .................... 163,164 Instrument Panel and Contr ols .............. 1 6 2 Instrument Panel Lens Cleaning ............. 3 7 3 Integrated Power Module (Fuses) ............ 3 7 4 Interior Appearance Care .................. 3 7 2 Interior Lights .......................... 1 3 3 Intermittent W ipers (Delay W ipers) ........... [...]

Brake Assist W arning ................... 2 8 5 Brake W arning ..................... 170,274 Bulb Replacement ................... 382,383 Center Mounted Stop ................... 3 8 7 Courtesy/Reading ................... 132,141 Cruise .............................. 1 6 4 Daytime Running ...................... 1 3 0 Dimmer Switch, Headlight .......[...]

Theft Alarm (Security Alarm) .............. 1 7 1 T ire Pr essure Monitoring (TPMS) ........ 171,305 T raction Control ....................... 2 8 5 T urn Signal ...................... 76,131,166 V anity Mirror .......................... 8 4 V oltage ............................. 1 6 4 W arning (Instrument Cluster Description) ..... 1 6 4 Loading V[...]

Electric Remote ........................ 8 3 Exterior Folding ........................ 8 2 Heated .............................. 8 3 Outside .............................. 8 2 V anity ............................... 8 4 Modifications/Alterations, V ehicle ............. 7 Monitor , T ire Pressur e System ............... 3 0 5 Mopar Parts ...........[...]

Overhead Console ....................... 1 4 1 Overheating, Engine ...................... 3 2 2 Owner’s Manual (Operator Manual) ......... 4,417 Paint Care ............................. 3 6 9 Panic Alarm ............................ 2 5 Parking Brake .......................... 2 7 1 Passing Light ........................... 1 3 2 Personal Setting[...]

Rear Seat, Folding ....................... 1 2 6 Rear W indow Defroster ................... 1 5 7 Rear W indow Features .................... 1 5 7 Recorder , Event Data ...................... 6 1 Recreational T owing ...................... 3 1 9 Reformulated Gasoline .................... 3 1 1 Refrigerant ............................ 3 5 4 Release,[...]

Seat Belts .......................... 36,38,74 And Pregnant W omen ................... 4 7 Child Restraint ................... 62,63,64,70 Extender ............................. 4 7 Front Seat .......................... 38,39 Inspection ............................ 7 4 Operating Instructions ................... 3 9 Pretensioners ...................[...]

Automatic T ransmission .............. 255,260 Shoulder Belts ........................... 3 8 Side W indow Demisters (Defrosters) .......... 2 3 7 Signals, T urn ...................... 76,131,166 Slippery Surfaces, Driving On ............... 2 6 5 Snow T ires ............................ 3 0 3 Sound System Kicker .............................. 2 2 [...]

System, Remote Starting .................... 2 7 T achometer ............................ 1 6 4 T elescoping Steering Column ............... 1 3 6 T emperature Gauge, Engine Coolant ..... 165,166,323 T ether Anchor , Child Restraint ............... 6 6 Theft Alarm (Security Alarm) ................ 1 8 Theft System (Security Alarm) ............... 1[...]

Disabled V ehicle ....................... 3 3 9 Recreational .......................... 3 1 9 T owing Assistance ....................... 1 0 0 T owing V ehicle Behind a Motor Home ......... 3 1 9 T raction Control ......................... 2 7 8 T railer T owing .......................... 3 1 9 T ransmission ........................... 3 6 7 Automa[...]

V ehicle Storage ....................... 236,381 V ehicle Theft Alarm (Security Alarm) .......... 1 8 V iscosity , Engine Oil ...................... 3 4 9 V oice Recognition System (VR) .............. 1 1 4 W arning Flasher , Hazard .................. 3 2 2 W arning Lights (Instrument Cluster Description) ............. 1 6 4 W arnings and Cautions [...]

291686.ps 11Y532-126-AA Chrysler 1" gutter 07/14/2010 08:26:13 VEHICLES SOLD IN CANADA W ith respect to any V ehicles Sold in Canada, the name Chrysler Group LLC shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefor e. DRIVING AND ALCOHOL Drunken driving is one of the most fr equent causes of accidents. [...]

Chrysler Group LL C 10D49 2 -126-AD 4th Edition Printed in U.S.A.[...]