DynaScan DS47LT3 manual

User Manual Vers ion 1.0 3 The use of diagram s and illustrations i n the manual for reference only, actual product may be different. Product design and specifications are subject to change w ithout notice Professional LCDs[...]

DS47LT3, LT4 User Manual 1 Contents Safety Pr ecautions ............................................................................................................. ...........................................3 Important Safety Information ................................................................................................... ..........[...]

DS47LT3, LT4 User Manual 2 RS-232 Input ...........................................................................................................................................................22 Troubleshooting ........................................................................................................................................[...]

DS47LT3, LT4 User Manual 3 Safety Precautions CAUTION Do not install display in a wet environment or place anything on the top of the display filled with liquid, such as vase or beverage. Do not install near flammable objects, such a s gasoline or other volatile liquids. Do not install near any heat sources such as radiators or other heating device[...]

DS47LT3, LT4 User Manual 4 Important Safety Information z Disassembling the LCD is stri ctly prohibited. Opening the cover may expose the use r to shock or other hazards. Please contact DynaScan ce rtified service professio nals fo r all maintenance requi rements. z Do not allow any liquid to enter the LCD. Also avoid placing the LCD close to water[...]

DS47LT3, LT4 User Manual 5 Cleaning the Panel z Use a soft, lint-free cloth to gently wipe dust off the screen panel. z Please do not use any hard material to wipe the pan el. z Please do not poke the panel with your h and or any sh arp object (such as a pen or a nail) or exert excessive pressure to the panel to prevent damage to the panel. z Pleas[...]

DS47LT3, LT4 User Manual 6 Declaration of Conformity FCC Verification This device complies with Part 15 of the FCC Rule s. Operat ion is subject to the following two conditions: (1) this device may not cause harmful interference, and (2 ) this device must accept any interference received, including interference that may cause undesired operatio n. [...]

DS47LT3, LT4 User Manual 7 Getting Started Contents Confirm the accessories below are includ ed with the display. If any item is missing, please contact your dealer. The color and shape of the acce ssories may vary by product. • DS47LTx Professional L CD • Remote Control x1 pcs • Batteries (1.5V / AAA) x2 pcs • Quick Start Guide x1 pcs • [...]

DS47LT3, LT4 User Manual 8 Installing and Replacing Re mote Control Batteries 1. Open the battery compartment cover. 2. Insert 2 new AAA batteries. 3. Close the battery compartm ent cover. Warning: • Incorrect usage of batteries may cause leakage or explosion. • Pay attention to the polarity when installing batteries. • Do not use batteries f[...]

DS47LT3, LT4 User Manual 9 Installation The LCD must be properly installed using a wall m ount. Incorrect installation may cause injury o r damage the equipment. Product warranty does not cover damages cau sed by improper inst allation and DynaScan sh all not be held responsi ble in such incident. Mounting z Hanging the Professional LCD from the ce[...]

DS47LT3, LT4 User Manual 10 Orientation z When used in the portrait orientation, the LCD sho uld be rotated clockwise such that the left edge becomes the top edge. A B[...]

DS47LT3, LT4 User Manual 11 Installation Location z The ceiling or the wall must have enough str ength to support the LCD and its accessori es. z Do not install in a location with strong vibrations or is dusty. z Do not install near the building’s main ele ctric panel. z Do not install at a location where the LC D can be ea sily removed by the ge[...]

DS47LT3, LT4 User Manual 12 Connecting To a Power Source Using the power cabl e provided, insert the female connector into the back of the displ ay shown the in the diagram below. Connect the male end of the power cabl e to a 100-240 volt, 50 / 60Hz AC power outlet. Insert the plug completely into the socket. A loose power co nne ction may cause de[...]

DS47LT3, LT4 User Manual 13 Connecting Multiple Displays for Video Wall Applications To daisy chain more than one display for a video wa ll application, connect a video source to the first display in the chain. Connect the DVI-OUT of the 1 st display to the DVI-IN of the 2 nd display. Using the RS-232 cable provided, connect the RS-232 OUT of the 1[...]

DS47LT3, LT4 User Manual 14 Connector Positions X Y Z [ ] RS-232 (IN) DVI (IN) DVI (OUT) RS-232 (OUT) AC (IN) AC (OUT) X Y Z [ ] [...]

DS47LT3, LT4 User Manual 15 Operating Instructions Powering On/Off the Display To turn on/off the display, press the po wer switch on the back of the display as shown in the diagram belo w. Using the Remote Control When using the remote control, aim the remote at the IR receiver on the display. The sensitive range is 100 degree a s shown in the fig[...]

DS47LT3, LT4 User Manual 16 Using the Remote Control (cont.) Color and shape may vary by model. ITEM DESCRIPTION X POWER Power On / Off Y MENU OSD On / Off Z UP Move the cursor up or change the setting of the sele cted item [ LEFT Exit the current selection RIGHT Select the highlighted item ] DOWN Move the cursor down or chang e the set ting of t[...]

DS47LT3, LT4 User Manual 17 Using the Rear Panel Controls ITEM DESCRIPTION MENU OSD On / Off UP Move the cursor up or change the setting of the sele cted item DOWN Move the cursor down or chang e the set ting of the selected item LEFT Exit the current selection RIGHT Select the highlighted item[...]

DS47LT3, LT4 User Manual 18 Navigating the On Screen Display (OSD) Menu Press the MENU button on either the real panel control or remote control to display the OSD. Use the navigation arrows to select and adjust menu items. ITEM DEFAULT DESCRIPTION DISPLAY MODE LAN. Change the orientation of the Menu. The Menu can be displayed in either LANDSCAPE o[...]

DS47LT3, LT4 User Manual 19 ROW POSITION 1 Vertical position in video wall. COLUMN POSITION 1 Horizontal position in video wall. LOCAL DIMMING OFF Adjusts the contrast. MODE 1 is the highest contras. OFF is the lowest contrast. GAMMA NATIVE Adjusts the Gamma value. IR CONTROL ON Enables / disables the ability to use the remote to control the Menu. [...]

DS47LT3, LT4 User Manual 20 Specifications MODEL DS47LT3 / DS47LT4 LCD Panel Size 47 inches Native Resolution 1920 x 1080 DS47LT3 1500 cd/m² (Typ.) Brightness DS47LT4 2500 cd/m² (Typ.) Contrast Ratio 3000:1 (Static) 1000000:1 (Dynamic) Response Time 9ms (Typ.) Viewing Angle 178 ° / 178 ° Life Time 50,000 hrs (Typ.) PANEL Panel Surface AG, 3H Po[...]

DS47LT3, LT4 User Manual 21 Pin Assignments Digital RGB Output (DVI-D): DVI PIN ASSIGNMENT OF DVI CONNECTOR 01 TX2- 09 TX1- 17 TX0- 02 TX2+ 10 TX1+ 18 TX0+ 03 Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5) 04 NC 12 NC 20 NC 05 NC 13 NC 21 NC 06 DDC-Serial Clock 14 +5V power 22 Shield (TXC) 07 DDC-Serial Data 15 Ground 23 TXC+ 08 NC [...]

DS47LT3, LT4 User Manual 22 RS-232 Output PIN No. NAME 01 connected to 7&8 02 RXD 03 TXD 04 connected to 6 05 GND 06 connected to 4 07 connected to 1&8 08 connected to 1&7 09 NC RS-232 Input PIN No. NAME 01 connected to 7&8 02 TXD 03 RXD 04 connected to 6 05 GND 06 connected to 4 07 connected to 1&8 08 connected to 1&7 09 NC[...]

DS47LT3, LT4 User Manual 23 Troubleshooting ISSUE RECOMMEN DED SOLUTION No image is displayed • Check whether the DVI in cabl e is completely plugged in. • Check whether the main switch is in the ON position, and the power cord is completely plugged in. • Check whether the imag e source’s resolution is set to 1920 × 10 80 (1080P). • Chec[...]

DS47LT3, LT4 User Manual 24 Recycling and Energy Information DynaScan is firmly committed to its environmental protection effort s and we believe that reducing o ur products’ impact on the environment is of the utmost importance . We are dedicated to meet the latest environmental protection regulations. Energy usage Mode Energy consumption Normal[...]

DS47LT3, LT4 User Manual 25 Material Contents Declaration Hazardous Substance s Lead Mercury Cadmium Hexavalent Chromium Polybrominated Biphenyls Polybromodiphenyl Ethers Part Name Pb Hg Cd Cr 6+ PBB PBDE PCBA O O O O O O CHASSIS O O O O O O ACCESSORY O O O O O O PACKAGE O O O O O O “O” indicates that the level of the specified chemical substa [...]

DS47LT3, LT4 User Manual 26 Limited Warranty WARRANTY COVERAGE DynaScan's warranty obligations are limited to the te rms set forth below: DynaScan warrants its produ ct against defects in materials and workmanship for a period of TWO (2) YEARS from the date of initial installation. If a defect exists, DynaScan will repair the product at no cha[...]

DS47LT3, LT4 User Manual 27 PROGRAM OR DATA STORED IN OR USED WITH DYNASCAN PRODUCTS , AND ANY F AILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. DY NASCAN SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA.[...]

www.dynascanusa.com Copyright © DynaScan Technology, Inc. All Rights Reserved.[...]