Edimax Technology IC-1520POE manual

IC-1520DP / IC-1520DPg / IC-1520POE Wire / Wireless / Power over Ethernet Digital Pan/Tilt Internet Camera Quick Installation Guide Version: 1.0 (October, 2007)[...]

Multi-Languages QIG on the CD = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Č Č e e s s k k ý ý: Č eského pr ů vodce rychlou instalací naleznete na p ř iloženém CD s ovlada č i D D e e u u t t s s c c h h : : Finden Sie bitte das deutsche S.A.L[...]

Content 1. Check your package contents ......................................................................... 1 1.1. System Requirement ............................................................................ 2 2. Hardware Installation ..................................................................................... 2 2.1. LED and Focusi[...]

English Copyright © by Edimax T e chnology Co, L TD. all right s reserved. No part of this publication may be reproduced, transmitted, tr anscribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, c hemical, manual or otherwise, without the [...]

1 Thank you for purchasing Edimax Internet IP camera! This IP camera is an ideal product for all kinds of video-surveillance purposes, like home/office safety , kid/pet monitoring, and remote video acquire etc. Unlink conventional close-circuit vide camera, you’re not limited to the length of c able! Once this IP camera is connected to Internet, [...]

2 1.1. System Requirement System requirement for PC, MAC or Not ebook PC to access the Internet Camera are:  OS System: Windows 98, ME , 2000, XP + SP2, Server 2003  CPU: Intel Pentium III 750MHz abov e or Intel Celeron 1GHz above  Memory Size: 128MB (256MB recommended)  VGA Card Resolution: 800 x 600 or above 2. Hardware Installation 2[...]

y Power When the camera is power on and ready for access, the LED will light. y LAN When the Internet Camera is linking to wired network, the LED is lighting. The LED is flashing when video is transmitted or received through wired network. y WLAN ( For IC-1520DPg only ) When the Internet Camera is linking to wir eless network, the LED is lighting. [...]

The Camera features two ports and a Reset button. y Antenna Standard reverse SMA connector wher e any antennas with reverse SMA connector can connect to the Internet Camera. y Power The Power jack is where you can connect the power adapter. y LAN The LAN jack is where you can connect the Ethernet network cable. y Reset 1. If problems occur with you[...]

5 2.2. Inst allation Procedure 1. Unpack the Internet Camera p ackage and ve rify that all the items listed in the Chapter 1 are provided. 2. Connect the Internet Camera to your net work by attached the network cable from the switch/router to the LAN por t of the Internet Camera. 3. Connect the power adapter to the Inter net Camera and plug the pow[...]

2.3. Locate the IP Address Default IP address of this IP camera is 192.168.2.3. If you wish to assign another IP address to this IP camera, you have to log onto the web configuration interface of the camera first. If the left three fields of the IP address of your comput er is not 192.168.2.XXX , you’ll have to change the IP address of your compu[...]

2. Double-click ‘Network Connections’ icon. 3. Right-click ‘Local Area Connec tion’, and click ‘Properties’. 7[...]

4. Select ‘Internet Protocol (T CP/IP)’, then click ‘Properties’. 8[...]

5. In ‘IP address’ field, please fill in any IP address begins with ‘192.168.2’, and ends with a value greater than 2 and less than 254 (Y ou can us e the example in the picture ‘192.168.2.239’). In Subnet mask fiel d, please fill ‘255.255.255.0’. Please keep all other fields empty , and click ‘OK’. If you changed the IP address[...]

3. Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch Internet Explorer and type the IP address of the IP camera in address bar of Internet Explorer . Y ou should be prompted to input the user name and password: Default user name is ‘admin’ (in lower case) and password is ‘1234’. Click ?[...]

This IP camera requires a special ActiveX control (A.K.A. ‘Plugin’) to work. Please click on the message, and select ‘Install ActiveX Control…’: When you’re prompted, click ‘Install’ to continue. 11[...]

Y ou should be able to see the image from camera now: Note: If you see one of these messages (or both): OR Y our computer may not have the display cap ability that this IP camera requires, or you don’t have Microsof t DirectX® install ed. Please download Microsof t DirectX® from Microsof t’ s website ( http://www .microsof t.com ), and try ag[...]

4. Software Installation Follow the simple steps below to run the Install Wizard to guide you quickly through the Installation process. The following in stallation is implemented in Windows XP. The installation procedures in Wi ndows 2000/XP/Server 2003 are similar. 1. Insert the CD shipped along with the Inte rnet Camera into your CD-ROM drive. Th[...]

3. The system will start the installation procedures. Click “Next” to continue installation. 14 4. If you wish to install the software program in an alter nate location, click “Change”; otherwise click “Next” to move on to the next step.[...]

5. Click “Install” to star t installing the program. 6. The system will install t he program automatically. 15[...]

7. Click “Finish” to complete the software installation. 8. If you have Windows Defender (Windows XP) or other 3 rd party firewall softw are, you may see the fo llowing (or similar) message: Please click ‘Unblock’ (or similar opti on) to let IP came ra Utility pass the firewall, or the IP camera utility ma y not be able to function properly[...]

9. A new folder named ‘IP Camera’ in ‘All Programs’ will be created: Admin Utility , Camera Viewer , and Uninst a ll. Y ou can use these 3 utilities to connect to the IP camera and use the functions of the camera without web browser . 17[...]

10. When the installation is completed. T he system will auto run ”Adm inistrator Utility“. On the Internet Camera first page, the ca meras found in the network are listed in the left window. Choose the one you want to configure and click “Setting Wizard” to proceed. “N” means the camera is new and not 18 If you want to change these set[...]

11. Internet Camera is working through the network (TCP/IP Protocol). The IP address setting must be correct, or you c annot access to the camera. The wizard program will detect the IP address status of your network automatically and suggest a free IP address for the Camera. You can accept the suggested value or enter the value manually. If you ent[...]

13. The “Camera Viewer” will show the video automatically. Congratulations, you can use the camera through the network to view the video from now on. 20[...]

4.1 Firmware Upgrade Here provides several tools to upgrade t he firmware of this IP camera, clear all settings, or switch LED notification off. 21[...]

22 The descriptions of every setting in this menu will be given below: Item Description Upgrade Firmware If you downloaded latest firmware file from our website, you can click this button to start to upload the firmware file to the IP camera, and you’ll be prompted to provide the lo cation of firmware file. Click ‘Open’ to start upl oading ne[...]

23 R&TTE Compliance St atement This equipment complies with all the requi rements of DIRECTIVE 1999/5/EC OF THE EUROPEAN P ARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal E quipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and repl aces in the directi[...]