Edimax IC-7001W manual

I IC -7001W User Manual 10 -2013 / v1.0[...]

I Copyright ＠ Edimax Technology Co., Ltd. all rights reserved . No part of this publication may be rep roduced, transmitted, tran scribed, stored in a retrieval system , or translated into any language or computer language, in any form or by any means, electronic, mechan ical, magnetic, optical, chemical, manual or otherwise, without the prior wr[...]

II I. Product Informatio n .............................................................................. 1 I- 1. Package Conten ts .................................................................................................................... 1 I- 2. System Requirements .........................................................................[...]

III IV - 4. Pan & Tilt ............................................................................................................................... 51 IV -4- 1. Pan & Tilt Settings ................................................................................................................. 51 IV-4- 2. Preset .........................[...]

1 I. Product Information I- 1. Package Contents IC -7001W QIG CD -R OM Power Adapter Eth ernet Cable I-2. System Requirements - Intel Pentium 4 2.4GHz ( above o r similar) - VGA card (1024*768 or ab ove) - CD -ROM Drive - At least 128MB hard disk spa ce (256 MB recomm ended) - Windows 2000, XP, Vista, 7 or 8 - Web browser (Inte rnet Explorer 7.0, F[...]

2 I-3. Back Panel Antenna LED LAN Port Power Port WPS/Reset Butto n Audio Output[...]

3 I-4. LED Status I-5. Product Label The product label located on the bottom of the camera displa ys the MAC address and cloud ID of your n etwork camera. The MAC address and cloud ID are the same for easy reference. The cloud ID allow s you to view a live stream from your network camera remotely (from any Internet c onnection) as des cribed later [...]

4 I-6. Reset If you experience problems wit h your network cam era, you can reset the camera back to its factory defaul t setting s. This resets all setting s back to default. 1. Press and hold the WPS b utton found on the back panel for at least 10 seconds 2. Release the but ton when the ora nge LED is flashing quickly. 3. Wait for the netw ork ca[...]

5 II. Hardware Installatio n Follow the instruct ions below to ensu re your camera is prope rly connected and ready for setup. 1. Use an Ethernet cable to connect the network camera’s LAN port t o a router/s witch/access point ’s LAN port, as sho wn below. 2. Connect the powe r adapter to the n etwork camera’s p ower port and to a power suppl[...]

6 III. Camera Setup & EdiView Finder Your network cam era can be up and runni ng in just a few minut es. First, please follow the instructi ons below for Windows or Mac i n III-1. Installing & Using EdiView Finder to inst all the EdiView Finde r software and connect your camera to your wireless n etwork. Or you can follow III-3. WPS as an a[...]

7 3. Click “ Next ” and follow the on- screen instructions to instal l the EdiView Finder software ut ility. 4. When in stallation is complete , s elec t “Launch EdiView Finder Utility” before clicking “Finish” . O r double click the ”Edi View Finder Utili ty” i con on your desktop to launch Edi View Finder. 5. EdiView Finde r will [...]

8 The network camera’s IP address is displayed on this screen. After setup, you can enter this IP address into the URL bar of a web browser on the same local network to access your network camera’s web -based configuration interface. 6. Double click you r camera and then c hoose “Yes” or “N o” if you wish to set up a wireless conn ectio[...]

9 7. Select your wireless networ k from the list an d enter the correct password in the “Password” field, before clic king “OK”. This is t he wireless network which your camer a will connect to. 8. Unplug the Et hernet cable from you r network camera a nd click “Next”. Please wait a moment f or the camera to detect t he connecti on.[...]

10 9. When the conn ection is d etected as shown below, please click “N ext”. 10. Ent er a name and pa ssword for your came ra. The password wil l be used later to log in to your camera remotely via it s cloud ID , web int erface or via the EdiView smartph one app. Click “OK” to cont inue.[...]

11 11. Th e next screen will in dicate that setup is complete. Th e camera is operational and read y for use. Click “OK” and a preview window sho wing a live stream from your ca mera may open.[...]

12 I II -1-2. Mac EdiView Finder for Mac will not set up your network ca mera’s wireless connection. After this chapter, please continue to IV -1-2. Wireless to set up the camera’s wireless connection. 1. Insert the include d CD into your CD - ROM drive and br owse to the “Mac” folder. 2. Copy the “Edi View Finder” fi le to your d eskto[...]

13 3. EdiView Finde r will list a ll cameras on your local netwo rk, along with eac h camera’s name, model, I P address an d MAC address. Click the search icon to refresh the list if your camera is not displayed. The network camera’s IP address is displayed on this sc reen. After setup, you can enter this IP address into the URL bar of a web br[...]

14 5. Enter a na me and password for your camera. The pa ssword will be used later to log in to your came ra remotely via its cloud I D, web interface or v ia the EdiView smart phone app. Cli ck “ Next ” to continue. 6. The next sc reen will in dicate that setup is complete. The camera is operational and read y to be configu red for a wireless [...]

15 I II -2. Using EdiView Finder You can also use E diView Finder to fi nd your network c amera’s IP address, view a live stream, or modif y the network ca mera’s IP a ddress. Doubl e click the TV icon on the right side to view a l ive stream in a pop -up wi ndow, or cli ck the wrench icon to open a new wind ow with the netw ork camera’s IP a[...]

16 EdiView Finder will locate your network camera as long as you are on the same local network. Static IP users who may be using a different IP address subnet to the network camera should still be able to locate the network camera with EdiView Finder. If you encounter difficulties, it is recommended that you use a D HCP server – though you can ma[...]

17 II I-3. W PS (Wi-Fi Protected Set up) The WPS button is a qu ick and eas y method to esta blish a secure wireless connection between you r network camera and your wireless route r/access point. 1. Press and hol d the WPS button on y our wi reless router/ac cess point for the correct length of ti me to activate its WPS. Please check the instructi[...]

18 IV. Web-Based Management Interface When you are usin g the same local n etwork as your camera, y ou can us e the web-based management i nterface to view or configure t he camera. You can access the web -based mana gement interface with a web browse r on a smartphone o r computer. For smartphone use rs, the appearance of t he interface will vary [...]

19 2. You may be p rompted to al low a Java add -on to run. Please click t he message where it says “cli ck here” and then cli ck “Run Add - on” . If any other security warnings/prompts appear, please select “Run” or “Allow” or similar, depending on your browser . 3. Enter the u sername and passwo rd for your networ k camera (defaul[...]

20 4. For comput er users, t he “Li ve View” screen will be di splayed, as sho wn below. On the live view screen you can see a live stream from your camera and utilize various camera control using th e icons down the lef t side. Remote Control Use the remote cont rol to pan/tilt the camera and adjust the viewing position. Preset Adjust the came[...]

21 your keyboard to exit full screen. Digital Zoom Click to open the d igital zoom window: Adjust the level of z oom from 100% to 400% using the “Zoom F actor” slide bar and mov e the green box to the section of the image you wish to zoom on. T he enlarged /zoomed view will be displayed in th e main window. Mode Click the icon to reverse the di[...]

22 6. After making an y changes, click “Sav e Settings” to save the settings and bring the changes int o effect.[...]

23 IV-1. Basic The “Basic” menu opens a submenu with eight categories of setti ngs for your netw ork camera’s basic operation. Select a category and refer to the appropriate chapt er. IV -1-1. Ne twork Local network setti ng s are displayed on this pa ge, as shown below :[...]

24 Network Type Select “DHCP” to a utomatically assign an I P address to your net work camera from your router, or “Static IP ” to manually set a stat ic IP address. IP Address Specify an IP address he re, which will be the IP address of your networ k camer a. Subnet Mask Enter the subnet mask of the IP address. Gateway Enter the gateway ad[...]

25 IV -1-2. W ireless The wireless page al lows you to configure settings for y our network camera’ s wireless connection. For Windows users, you r wireless conne ction should have been set up a lready using EdiView Finder, t hough you can st ill use this page to revise the settings if you nee d. Mac users need to configure these set tings manual[...]

26 IV-1-2-1. Smartphone 1. Select “Basic” fr om the menu on the left sid e and then select “Wireless” . 2. Configu re the wireless settings A – E shown in the ta ble below: A B C[...]

27 D E[...]

28 3. After the settings are save d, remove the Ethernet cable from you r network camera. Your camera should n ow be connected t o your Wi -Fi. A Wireless Connectio n Select “Enable” to enable the wireless connecti on. B Available Network (1) Click “Refresh” to di splay all available Wi -Fi networks. C Available Network (2) Select your Wi-F[...]

29 IV-1-2-2. Computer 1. Configu re the wireless settings A – E shown in the tab le below: 2. After the setting s are saved, remove the Ethern et cable from your network camera. Your ca mera should now be connected to you r Wi -Fi. A Wireless Connectio n Select “Enable” to enable the wireless connecti on. B Available Network Click “Refresh?[...]

30 IV -1-2- 3. WPS WPS (Wi-Fi Protec ted Setup) is a qui ck and easy way to set up w ireless connections betw een compatible devices. Us e the “Start PBC” o r “Start PIN” button to activat e WPS on your network cam era. Your networ k camera’s WPS PIN code is also listed next to “Self PinCode”. Self PinCode Your network cam era’s WPS[...]

31 IV -1-3. Dynamic DNS Dynamic DNS (DD NS) is a service which provides a host name- to -IP service for dynamic IP users. I f your Internet se rvice provider didn ’ t issue a fi xed IP address, you can u se a third-pa rty dynamic DNS p rovider to map your current IP address to a fix ed IP address. Several free or paid DD NS services are available[...]

32 IV -1-4. RTSP Real Time Streaming Protocol (RTSP) enables the net work camera to be u sed with a streaming media se rver. Ente r the required RTSP sett ings. RTSP Port Enter the RTSP por t. MJPEG RTSP Path Enter the MJPEG RTSP pat h. RTP Port Range Enter the RTSP por t range. Verification Select a verification t ype from the drop down menu.[...]

33 IV -1-5. Da te & Time You can set and ad just the n etwork camera ’ s system t ime and date on this page. Maint aining a correct system time is particularly i mportant for recorded video organizat ion/playback. Mode Select ”NTP” or “Manua l Setting”. NTP (Network Time Protocol) can set an d maintain the time and date automati cally[...]

34 IV -1-6. Users In addition t o the default admini strator account, you can configu re several different login accounts for the n etwork camera, wit h two different levels of access – operato r and guest. Operator accounts can configu re all functio ns of the network camera in t he same way as the a dministrator account , whil e guest accounts [...]

35 Authority Select the user ’ s authority : Operators can view video and configu re all settings, while g uests can only view v ideo. Add Add a new user. Modi fy Save the changes to an existing , selected user. Remove Remove selected user. Anonymous Login Enable or disable a nonymous logi n . Anonymous login allows anyone to l ogin to the networ[...]

36 IV -1-7. UPnP Universal plug-and -play (UPnP) is a set of netwo rking protocols which enables network devices to co mmunicate and aut omatically establi sh working configurations wit h each other. When enabled, Windows comput ers can automatically discover th e network camera on the lo cal area network. T he network camera also suppo rts IGD. En[...]

37 IV -1-8. Bo njour Bonjour is a featur e of Mac computers which allows Safari web b rowser to discover devices a nd services on th e local network and provide a quick shortcut for access . When enabled , Safari users on the local network can find a shortcut to the networ k camera under Safari’s “ Bonjour” menu. Select “Enable” or “Dis[...]

38 IV-2. Video The “Video” menu consists of three categories for configuring the ne twork camera’s video settings. Select an item fro m the submenu an d refer to the appropriate follow ing chapt er. IV -2-1. Vi deo Settings The “Video Setting s” page enables y ou t o modi fy the network cam era’s resolution and frame ra te setting s. Re[...]

39 camera will automatically lower the frame rate to provide a better vi deo quality, by using a longer exposure time. Power frequency Adjust the power f requency to 50 Hz or 60 Hz frequency depending on your local regi on, in order to reduce flicker/impro ve playback in your videos. Rotate Image Select 180 to rotate you r network camera’s video [...]

40 IV -2-2. Image A ppearance The “Image Appearance” page al lows you to adjust various param eters relating to t he network camera’s ima ge appearance using th e sliders shown below. Brightness/ Contrast/ Saturation/ Sharpness / Hue Click and drag the bl ue lever to chan ge the value according to your prefe rence for each category. Reset to [...]

41 IV -2-3. Ni ght Vision Night-visi on allows your network cam era to capture images i n dark environments by u sing infra -red LEDs. Auto-switch wil l detect light levels in your network camera’s environ ment and aut omatically switch to ni ght - vision in low light. Sele ct “Enable” or “Disable” f or night -vision auto-swit ch.[...]

42 IV-3. Events Select an item fro m the “Events” menu a nd refer to the appropriate foll owing chapter. You can conf igure settings for motio n detection, schedul ing, SMTP and FTP. IV -3-1. Moti on Detection The network came ra features a motion detection funct ion and various op tions for (motion detection) event s notificati on. On this pag[...]

43 Upload Event File to FTP A snapshot image of a detected event can be sent to a designated FTP se rver. Select “Enable” or “D isable ” for this function. When enabled, you need to confi gure the FTP serv er information on th e “FTP” pa ge of the “Events” menu. Send Event File to Email A snapshot image of a detected event can be se[...]

44 IV -3-2. Detec tion Region When using the ne twork camera’s moti on detection function, y ou can specify the area in the vid eo where the net work camera shou ld be sensit ive to motion. Motion outside of the detection region w ill be ignored by the network camera. Thi s is useful to a void false alarm s. It em Description Region 1 / Region 2 [...]

45 of each box accord ing to your prefere nce by clicking and dragging in side the box (move) or on the edges (resize). Sensitivity Adjust the sensitivit y level of motion detection for each region . A higher val ue wi ll trigger the alarm f or minor motion in t he video and vice-versa . You can reduce th e sensitivity level if you receive u nneces[...]

46 IV -3-3. Sc hedule Settings The network came ra can be schedule d to record autom atically at/on specifi ed times and days. Select “En abl e” to enable this feature and t hen define at which times the networ k camera will record using the t able below. For each day, click and drag across the timeline on th e times which you want to record. A[...]

47 Delete Delete the selected blue recording bl ock on the timeline. Delete All Delete all blue recording blocks on t he timeline. Select All Select all blue recording blocks. Store Store the recording sett ings on the timeline. Note: Schedule set tings must also be enab led for the schedule t o come into effect.[...]

48 IV -3-4. SMTP A snapshot image of a motion- detected event can be s ent to a desig nated email recipient. This functi on mus t be enabl ed in “Motion Detection” setting s in the “Events” menu. Enter the required informati on about your send er and recipient email accounts below. Email Service Provider Select “Manual Set tings” to ent[...]

49 service provider. Recipient E-Mail Address Enter the email re cipient’ s email address here. Sender E-Mail Address Enter the sender’s email ad dress here to avoid spam filter issues. SSL/TLS Select ‘ SSL or TLS ’ when your SMTP s erver requires encryption. Consult your mail server administrat or when in doubt. SMTP Authentication Select [...]

50 IV -3-5. FTP A snapshot image of a detected event can be sent t o a designa ted FTP serve r. This function must be enabl ed in “Moti on Detection” sett ings in the “Events” menu. Enter the requi red information about you r FTP server below. FTP Server Enter the IP address or host n ame of th e FTP server. User Name Enter the user name re[...]

51 IV -4. Pa n & Tilt The network came ra features pan an d tilt capability which can be confi gured using the “P an & Tilt” menu. Select a category f rom the submenu an d refer to the appropriate followi ng chapter. IV -4-1. Pa n & Tilt Settings Adjust the settings for yo ur network camera’s pan /tilt function acco rd ing to your[...]

52 few minutes. Manual Calibration Click here to command t he camera to calibrate itself immediately. IV -4-2. P reset The network came ra can save up to f our preset points wit hin it s range of motion, which can then be view ed using the 1 – 4 shortcut i cons in “ Live View”. This funct ion allows you to avoid manuall y adjusting the camera[...]

53 to your preference, and then cli ck “Store Position Information” (above) to sav e the position as a select ed preset. Set Initial Position Reset the preview win dow/viewing position back to the network came ra’s default position.[...]

54 IV -5. System The “System” men u consists of thr ee categories, “Basic”, “Advanced” an d “Cloud Servi ce”. Select a category and follow th e appropriate chapt er for more information. IV -5-1. Ba sic The “Basic” menu enables you to set t he camera’ s name and a dministrator password, as well as switch the LED( s) on/off acc[...]

55 IV -5-2. A dvanced The “Advanced” p age allows you to upg rade the network camera’s fi rmware, backup or restore the networ k camera’s settings, and r eset or restart the network camera. Please che ck the Edimax websit e for the latest f irmw are for your network camera. Do not switch off or disconnect the device during a firmware upgrad[...]

56 Reset to default Select “Keep Netwo rk Settings” or “D efault Settings” and t hen click “Reset to Defau lt”. When the camera resets, “Keep Network Settings” will reset all settings but keep the current network sett ings. The network camera’s IP addres s will remain the same. “Default Setti ngs” will reset all of t he camera[...]

57 IV -5-3. Cloud Se rvice Edimax Plug & View is a fu nction to allow you to view your netwo rk camera remotely via a cloud server (see V. Myedimax.com ) and EdiView App. You can enable or disable thi s feature here.[...]

58 IV -6. Status The “Status” menu provides important information about the status of th e network camera. Thi s information is useful for troubl eshooting purposes or for network configura tion. IV -6-1. System Information A summary of syst em-wide informat ion about th e network camera is displayed on this page, displ ayed under fou r categor[...]

59[...]

60 IV -6-2. System Log A system log provid es information about the netwo rk camera ’ s usage an d actions. The syste m log can also be s ent to a remote se rver for archiving. Log Level Select a level of det ail for the log from the dropdown list , from 0 - 4 . 0 (minimum) wil l only log critical informati on, while 4 (maximum) will l og everyth[...]

61 V. Myedimax.com You can use your n etwork camera’s Myedimax.com cloud I D to monitor your camera remotely using a web br owser from any I nternet connecti on. The network camera’s green LED must display on to indi cate a successful clou d connection, in order for th is function to work. 1. Identi fy your network camera’s cloud I D. The clo[...]

62 2. Enter clou dID.myedimax.com into th e URL bar of a web brow ser. For example, if your cloud ID i s 801f02c46242 then enter http:// 801f02c462 42.myedimax.com into your web b rowser. Internet Explorer is recommended. 3. You may be p rompted to al low a Java add -on to run. Please click t he message where it says “click here” a nd then clic[...]

63 4. Enter your came ra’s password ( default pass word: 1234 ) and click “OK” to see a live stream from you r network camera. 5. The netwo rk camera can be operate d an d configured usi ng the icons in the toolbar located below the i mage. To configure the n etwork camera, click to show the co nfiguration menu window:[...]

64 6. Use the sli der controls to change the image brightness, saturation, sharpness, video q uality and pan & tilt speed. Use the d ropdown lists to change the video resolut ion and oper ating language , and cl ick “Apply” when finished.[...]

65 VI. 16 Channel Viewer for Windows Besides using web brows er to operate this networ k camera, you can also use the Windows uti lity, which provide s faster access to all functi ons of this network camera. VI -1. Installation 1. Insert the include d CD into your CD - ROM drive and if the setup utility does not automaticall y open, please locate a[...]

66 4. Check the inst allation locati on and c lick ‘Next’ to continue. 5. C lick “Next” to co ntinue.[...]

67 6. A summary of your installation wi ll be displayed. Please check everyt hing is correct and click “Instal l” to begin the installation. 7. Please wait a moment for the in stallation t o complete.[...]

68 8. Click “Finish” and then double click the “I PCam Surveillance Softwar e” icon on your desktop t o open the softwa re.[...]

69 VI -2. Using the 16 Chan nel Viewer You can select the ‘IPCam Surveillance Software ’ icon from your d esktop, quick launch bar, or start me nu to start th e 1 6 channel v iewer software. Note: The network camera surveillance software will only work when your monitor ’ s resolution is ‘ 1024 x 768 ’ . Please change the resolution befor[...]

70 Hold your mouse curso r over any icon for a des cription of it s function . Descriptions are also includ ed below: Item Description Video display area The image of all connected ca meras wil l be displayed here. Langu age Select a language from this d ropdown menu to change the display language. Display layout Change camera imag e display layout[...]

71 Close window (stop surveillance) Terminates netwo rk camera surveillan ce software. Minimize window Minimizes networ k camera surveillance software window.[...]

72 VI -3. Configuring the 1 6 Channel Viewer VI -3-1. Camera Configuratio n In order to use th e 16 channel view er software, you must configu re the camera(s) you wis h to connect. Please click the wrench icon ( ) and a popup menu will ap pear: Please select ‘ Cam era Configuration ’ to configure came ras: Note: If you ’ re prompted by a Win[...]

73 VI -3-1-1. Camera In this t ab you can configure all the cameras you wish to connect to . Up to 16 cameras can be connected simult aneously: Here are the descri ptions of all settin gs : Item Description Channel Select the channel nu mber you wish to set. Camera Search All cameras found on your local netw ork will be displayed in t he ‘Camera [...]

74 the camera’s location or purpose eas ily. Model Displays the model of the selected camera, this field cannot be chang ed. IP* Input the IP address of the camera. Username* Input the user name of the cam era. Web Port* Input the web port of t he camera. By defaul t it’s ‘80’. Password Input the password of the cam era. Default password is[...]

75 VI -3-1-2. Scheduled Recording In this tab, you ca n setup scheduled video recording, s o you can record t he video captured by al l cameras you have according to a pre-defined s chedule.[...]

76 Here are the descr iptions of all settings: Item Description Channel Select the channel nu mber you wish to set. One Time Schedules You can specify the one- time schedule for a selected camera; this schedul e will be executed once only. New (One Time Schedul es) Click this button an d a new window will appear: Please specify the time durati on o[...]

77 You can define the recording schedule tha t will be executed at the specifi ed time of certain weekday(s) in a week. Please check all weekdays that appl y, and set the start time in the ‘From’ fi eld. You can set the duration of video r ecording in the ‘Period’ field (format is HH:MM: SS), and the end ti me will be calculated automati ca[...]

78 VI -3-1-3. Audio For cameras that s upport audio, you can use t his tab to decide if you wish to hear the audio captured by the select ed camera. Here are the descri ptions of all settings: Item Description Channel Select the channel nu mber you wish to set. Mute Audio Check this box and the netwo rk camera surveillan ce software will not p lay [...]

79 VI -3-1-4. Motion Recording With this funct ion activated, only mo tions captured by the cam era will be recorded, so you don’t ha ve to waste hard disk sto rage space on i mages you don’t need to pay at tention to. Here are the descri ptions of all settings: Item Description Channel Select the channel nu mber you wish to set. Enable Enable [...]

80 is triggered Send mail when motion is triggered Send an email to a pre -defined add ress when a motion has been detected by the cam era. OK Save settings in this ta b. Cancel Discard all setting s in this tab.[...]

81 VI -3-2. General Options Click the wrench icon( ) and a popup menu will ap pear: When you select “ General Options”, pl ease refer to the appropriate foll owing chapter: VI -3-2-1. General All general settings such as t he file st orage directory an d recording spaces can be set here.[...]

82 Item Description Data Directory Set the directory (f older) you wish to store the recorded video and capture d image. You can cli ck the ‘Brow se’ button to pick a di rectory on your hard disk. Free Recording Space Displays remaining storage spac e. Max Video File Size Defines the maximum fi le size of every video fil e. When the size of the[...]

83 VI -3-2-2. Email Setting If you want to use the motion dete ction function and wi sh to receive an e mail that contains the image captur ed by the camera, p leas e set up your emai l related parameters here fi rst. Item Description E-Mail Subject Specify the subject of the sent email. Recipient E- Mail Address Lists all email addresses you s et.[...]

84 Edit Select an email address f rom the ‘Recipient E - Mail Address’ box, and click ‘Edit’ to edit the email address. Delete Delete the selecte d email address. Sender E-Mail Address Specify the email address that wil l appear as the sende r. SMTP Server Specify the IP address o r host name of th e SMTP server you wish to use. Most I SPs [...]

85 VI -3-2-3. Security You’ll need to inpu t the password every time you wish to use thi s networ k camera surveillance software: To set the password , please use the ‘Security’ tab in the ‘General Options’ menu: Here are the descri ptions of all settings:[...]

86 Item Description Enable Requires password a uthentication when thi s software starts. Disable Password authenti cation is not requi red when this software starts. Password Input the password you wish t o use here. Confirm Password Input the password you wish t o use here again.[...]

87 VI -3-2-4. About Software version is di splayed in this tab.[...]

88 VI -4. Changing the Displa y Layout This network cam era surveillance sof tware provid es 8 display la youts: Every layout displays a di fferent number of cameras in different arrangement s , you can click the icon tha t re pr esents a specific layout , and the video disp lay area will change accordingl y. Layout style 1: 1 Camera only Di splays[...]

89 Layout style 3: 6 Cameras Displays the video of u p to 6 cameras. Layout style 4: 8 Cameras Displays the video of up to 8 cameras . Layout style 5: 9 Cameras Displays the video of u p to 9 cameras. Layout style 6: 10 Cameras Displays the video of u p to 10 cameras.[...]

90 Layout style 7: 13 Cameras Displays the video of u p to 13 cameras. Layout style 8: 16 Cameras Displays the video of u p to 16 cameras.[...]

91 VI -5. Fu ll Screen Mode If you want to use al l available space on your monit or to display the surveillance image, you can cli ck the ‘Full Screen’ butto n to switch the displ ay mode to full -screen mode. To exit full -screen mode, press the ‘ESC’ key.[...]

92 VI -6. Scan If you have more than one ca mera configu red, and you wish t o switch the display image between cameras, you can click the ‘S can’ button to switc h between all configured came ras. Click the ‘Scan’ bu tton once to activa te the scan f unction (t he scan icon wi ll become blue ), click again to stop sca nning ( the scan icon[...]

93 VI -7. Pan & Tilt For cameras that s upport pan - tilt function s, you can chang e the direction that the camera p oints to, to see different places that fal l within the cam era’s view. Please select a camera in t he video di splay area by clicki ng on its image, an d then click the directi ons you wish the camera to move to (total 4 dire[...]

94 VI -8. Snap shot You can take a sna pshot of a selected camera and sav e it to a ‘Snapshot’ sub - folder in a pre-defi ned data directory. Click the snapshot button once to ta ke a snapshot; you can take as many snapshots as you want until the ha rd disk is full.[...]

95 VI -9. Recording You can start video recordi ng a se lected camera ’ s imag e by clicking the ‘Start Recording’ button: When recording starts, you ’ll see a message displayed i n the mes sage display box, such as ‘1/1 1 0:00:00, Camera 2 Sta rt Manual’, which means cam era 2 start ed recording manually on 1 /1 at 10:00:00. To stop re[...]

96 VI -10. Video Playback You can playback al l recorded video by click ing th is button. A new window will ap pear: You have to searc h the video file bef ore you can play it . There are two kin ds of video search: Time Search (s earch all videos file tha t fall within a specific period of time) and M otion Search (sear ch all videos recorded by t[...]

97 VII. EdiView App You can use the free EdiVie w smartphone app to monitor your camera remotely using a smartph one from a ny Internet connecti on . The network camera’s green LE D must display on to indicate a successf ul cloud connec tion, in order for this fu nction to work. EdiView app screens may vary slightly according to version and futur[...]

98 2. Run the Edi View app. iOS users selec t “Add new camer a” an d Android users select “Yes ” to search for available cameras. 3. Select your n etwork camera, ent er the password when prompted (d efault password is 1234 ) and tap “OK”. iOS:[...]

99 Android: 4. Android us ers select the camera na me and tap “D one”. iOS users tap “Live” from the menu acr oss the bottom of the s creen .[...]

100 Android: iOS:[...]

101 Federal Communication Commission Interference Statement This equipment has b een tested and found t o comply with the limits for a Class B digital device, pursuan t to Part 15 of FCC Rules. These limits are de signed to provide reasonable prot ection against harmful interference in a residential install ation. This equip ment generates, use s, [...]

102 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC. French: Cet équipement est conforme aux exigences essentielles e t autres dispositions de la directive 2004/108/EC, 2006/95/EC, 2009/125/EC Czechian: Toto zaříz[...]

103 Declaration of Conformity We, Edimax Tec hnology Co., L td ., dec lare under our sole responsibility, th at the equipmen t described below c omplies with the requiremen ts of the European R&TTE directive 2006 /95/EC, and directive 2011/65/EC( RoHS) . Equipment: Wireless Day & Night Pan & T ilt Ne twork Camera Model No.: IC - 7001W T[...]

104 Notice Accord ing to GNU General Pu blic License Version 2 This product includes software that is subject to the GNU G eneral Public License version 2. The pro gram is free soft ware and distributed without an y warranty o f the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of phy sically per[...]

105 intact all the notices that refer to this License and to the absence of any warra nty; and give any o ther recipients of the Program a copy of th is Licens e along with the Program. You may charge a fee for th e physical act of transferring a c opy, and you may at your option offer warranty p rotection i n exchange for a fee. 2. You may modify [...]

106 6. Each time you redistribu te the Program (or a ny work bas ed on the Program), th e recipient automatically receives a license from the original licensor to cop y, distribute or modify t he Program subject to the se terms and condition s. You may no t impose any further restriction s on the recipient s’ exercise of th e rights granted herei[...]

107[...]

108    Your  existing  static  IP  address  will  be  displayed  in  the  “IP  address”  field  before  you  replace  it.  Please  make  a  note  of  this  IP  address,  subnet  mask,  default  gateway  and  DNS  server  addresses.   5[...]

109  6.  Click  “Apply”  to  save  the  changes.    [...]

110  IV ‐ 1 ‐ 3.  How  to  Find  Your  Network  Security  Key   To  find  your  network  security  key,  please  follow  the  instructions  appropriate  for  your  operating  system.   If  you  are  using  Windows  XP  or  earlier,  please  [...]

111    4.  You  should  see  the  profile  of  your  Wi ‐ Fi  network  in  the  list.  Right  click  on  your  Wi ‐ Fi  network  and  then  click  on  “Properties”.     5. Click  on  the  “Security”  tab,  and  then  check  [...]

112  IV ‐ 1 ‐ 3 ‐ 2.  Mac   1.  Open  a  new  Finder  window,  and  select  “Applications”  from  the  menu  on  the  left  side.  Open  the  folder  labeled  “Utilities”  and  then  open  the  application  “Keychain  Access”.    [...]

113    3.  Double  click  the  SSID  of  your  network  and  you  will  see  the  following  window.     4.  Check  the  box  labeled  “Show  password”  and  you  will  be  asked  to  enter  your  administrative  password,  which ?[...]

114     Your  network  security  password  will  now  be  displayed  in  the  field  next  to  the  box  labeled  “Show  password”.  In  the  example  below,  the  network  security  password  is  “edimax1234”.  Please  make  a  note [...]

115  IV ‐ 1 ‐ 4.  How  to  Find  Your  Router’s  IP  Address   To  find  your  router’s  IP  address,  please  follow  the  instructions  appropriate  for  your  operating  system.   IV ‐ 1 ‐ 4 ‐ 1.  Windows  XP,  Vista  &  7   1. ?[...]

116    3.  Your  router’s  IP  address  will  be  displayed  next  to  “Default  Gateway”.    [...]

117  IV ‐ 1 ‐ 4 ‐ 2.  Windows  8   1.  From  the  Windows  8  Start  screen,  move  your  curser  to  the  top  right  corner  of  the  screen  to  display  the  Charms  bar.     2.  Click  “Search”  and  enter  “cmd”  into ?[...]

[...]

[...]

120  IV ‐ 1 ‐ 4 ‐ 3.  Mac   1.  Launch  “System  Preferences”  and  click  on  “Network”.   2.  If  you  are  using  an  Ethernet  cable  to  connect  to  your  network,  your  router’s  IP  address  will  be  displayed  next  to ?[...]

121    4.  Click  the  “TCP/IP”  tab  and  your  router’s  IP  address  will  be  displayed  next  to  “Router”.    [...]

122  IV ‐ 2.  Connecting  to  a  Wi ‐ Fi  network   For  help  connecting  to  your  device’s  Edimax.Setup  SSID  for  initial  setup,  or  to  connect  to  your  device’s  new  Wi ‐ Fi  network  (SSID)  after  setup  is  complete,  follow [...]

[...]

124  IV ‐ 3.  Troubleshooting   If  you  are  experiencing  problems  with  your  BR ‐ 6228nS  V2/nC  V2,  please  check  below  before  contacting  your  dealer  of  purchase  for  help.   If  you  are  experiencing  problems  immediately  after [...]

[...]

126   Router  Login  Enter  this  URL  in  a  web  browser  to  run  iQ  Setup  or  configure  advanced  settings.  You  must  be  connected  to  the  device  by  Wi ‐ Fi  or  Ethernet  cable.  Username/Password  This  is  the  default  use[...]

127  7. Do  the  WAN  and  LAN  ports  work  the  same  when  the  device  is  in  different  modes?  No,  the  WAN  and  LAN  ports  have  slightly  different  functions  depending  on  the  operating  mode  of  the  device.   a. In  Wi ?[...]

128  IV ‐ 4.  Glossary   Default  Gateway  (Wireless  bridge):  Every  non ‐ access  point  IP  device  needs  to  configure  a  default  gateway’s  IP  address.  When  the  device  sends  out  an  IP  packet,  if  the  destination  is  not  [...]

129  A  network  mask  is  also  a  32 ‐ bit  binary  pattern,  and  consists  of  consecutive  leading  1’s  followed  by  consecutive  trailing  0’s,  such  as  11111111.11111111.11111111.00000000.  Therefore  sometimes  a  network  mask  can  also [...]

130  Application  Protocol  Port  Number Telnet  TCP  23  FTP  TCP  21  SMTP  TCP  25  POP3  TCP  110  H.323  TCP  1720  SNMP  UCP  161  SNMP  Trap  UDP  162  HTTP  TCP  80  PPTP  TCP  1723  PC  Anywhere  TCP  5631  PC  Anywhere  UDP ?[...]