Eiki LC-SD12 manual

MODEL LC-SD12 MUL TIMEDIA PR OJECT OR O WNER’S MANU AL[...]

2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Outstanding Compatibility This projector widely accepts various video[...]

3 T able of Contents TRADEMARKS • Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc. • IBM, VGA, XGA, and PS/2 are trademarks or registered trademarks of International Business Machines, Inc. • Windows and PowerPoint are registered trademarks of Microsoft Corporation. • Each name of corporations o[...]

4 CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPE[...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instruction CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR –D o not drop or bump a projector, otherwise damages or malfunctions may result. – When carrying a projector, use a suitable carrying case. – Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a pr[...]

7 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Po wer Cord f or the United Stat es and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has [...]

8 q Zoom Lever ( ☞ P20 ) w Infrared Remote Receiver ( ☞ P11 ) e Focus Ring ( ☞ P20 ) r Projection Lens ( ☞ P41 ) t Lens Cover ( ☞ P40 ) y Air Intake Vent ( ☞ P40 ) u Exhaust Vent o Air Intake Vent ( ☞ P40 ) !0 Terminals and Connectors ( ☞ P9, 15, 16 ) !1 Power Cord Connector ( ☞ P14 ) !2 Exhaust Vent !5 Air Filters ( ☞ P40 ) !6 [...]

9 S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET ✽ RESET button A microprocessor included in the projector may occasionally malfunction and need to be reset. If necessary, press this button with a sharp tool to restart the unit. Do not use it excessively. y AUDIO IN COMPUTER/ COMPONENT Connect a[...]

10 Parts Names and Functions T op Contr ols and Indicators POWER LAMP REPLACE WARNING INPUT MENU ON - OFF SELECT V O L U M E – V O L U M E + e w q u y t r i i POWER indicator Flash red until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode. It remains green while the projector is in operation. ( ?[...]

11 P - TIMER FREEZE C OMPUTER OMPUTER VIDEO P AGE SELECT D.ZOOM MUTE VOLUME - MENU N O SHOW IMAGE VOLUME + KE Y S TONE AUT O P C ON - OFF Parts Name and Functions To insure safe operation, please observe the following precautions : – Do not bend, drop the remote control, or expose the Remote Control to moisture or heat. – For cleaning, use a so[...]

12 Parts Names and Functions To insure safe operation, please observe the following precautions : – Use (2) AAA, SUM-4 or LR03 type alkaline batteries. – Replace two batteries at the same time. – Do not use a new battery with a used battery. – Avoid contact with water or liquid. – Do not expose the remote control to moisture, or heat. –[...]

13 – This projector is designed to project on a flat projection surface. – The projector can be focused from 4.3’(1.3m) to 21.3’(6.5m). – Refer to the figure below to adjust the screen size. 40” 100” 150” 200” 169” 127” 83” 34” A B 21.3’ (6.5m) 16.1’ (4.9m) 10.6’ (3.2m) 4.3’ (1.3m) Max. Zoom Min. Zoom A : B = 9 : 1[...]

14 This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or[...]

15 S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET Connecting t o a Computer IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector [...]

16 Installation Connecting t o Video Equipment S-VIDEO COMPUTER IN / COMPONENT IN / COMPUTER / COMPONENT AV AUDIO IN VIDEO USB SERVICE PORT RESET Video Source (example) Video Cassette Recorder Video Disc Player Video Cable ✽ (RCA x 1) S-VIDEO Cable ✽ Note : – If both the S-VIDEO jack and the VIDEO jack are connected at the same time when AUTO[...]

17 Connect the projector's AC Power Cord into an AC outlet. The POWER indicator flashes in a moment and then turns red. Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator turns green, and the cooling fans start to operate. The starting display appears on the screen and the count-down starts. 2 3 Tu r[...]

18 The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages regarding each adjustment and setting procedure. Press the Point 7 8 buttons to select a Menu icon to adjust. Press the Point ed buttons to select an item to adjust. Press the SELECT button to show the item data. Press the Point 7 8 buttons to adjust the da[...]

19 Basic Operation Menu Bar For Computer Source PC System Menu Used to select the computer system. ( ☞ P23 ) Image Adjust Menu Used to adjust computer image. [Contrast / Brightness / Color temp. / White balance (R/G/B) / Gamma / Auto grayscale] ( ☞ P28 ) Setting Menu Used to change settings of the projector or reset the Lamp replace counter. ( [...]

20 Press the FREEZE button on the remote control to freeze the picture on-screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Pictur e Fr eeze F unction Ke yst one Adjustment 1 Press the KEYSTONE button on the remote control or select Keystone on the Setting menu ( ☞ P36 ) to display the Keystone dialog[...]

21 Basic Operation Message disappears after 4 seconds. Press the P-TIMER button on the remote control. The timer display “00 : 00” appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-Timer display, press the P-TIMER button. And then, press the P-TIMER button again to cancel P-Timer function. 1 2 Press the MEN[...]

22 Menu Operation Direct Operation Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the r[...]

23 Computer Input Comput er Syst em Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additiona[...]

24 Computer Input Au to PC Adjustment Auto PC Adjustment function is provided to automatically conform Fine sync, Total dots and Picture Position to your computer. This function can be operated as follows. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon. 1 2 P[...]

25 Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non- synchronized picture, a non-centered picture or a skewed picture. The Manual PC[...]

26 Computer Input Note: Display area, Display area (H/V) and Full screen cannot be adjusted when 480p, 575p, 480i, 575i, 720i(HDTV) , 1035i(HDTV) or 1080i(HDTV) is selected on PC SYSTEM Menu. ( ☞ P23 ). Select area displayed with this projector. Select the resolution at the Display area dialog box. Display area Adjust the horizontal area displaye[...]

27 Computer Input Menu Operation Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button. Move the red frame pointer to the level and pres[...]

28 Computer Input Image Level Menu Move the red frame pointer to any of Image 1 to 4 where you want to set and then press the SELECT button. Reset all adjustments to previous figures. Reset Store Close the Image Adjust Menu. Quit To store manually preset image, move the red frame pointer to the Store icon and press the SELECT button to display the [...]

29 Computer Input Scr een Size A djustment This projector has a picture screen resize function, which enables you to customize the image size. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. When Digital zoom + is selected, the On-Screen Menu disappears and the [...]

30 Input Sour ce Selection ( Video , S-Video ) Menu Operation Direct Operation Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button to display the On-Screen Menu. Pre[...]

31 V ideo input Input Sour ce Selection ( Component, RGB Scar t 21 -pin ) Menu Operation Direct Operation Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button t[...]

32 Vi deo Input AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. Press the Point d button to move the red arrow pointer to the system that you want to select and then p[...]

33 Vi deo Input Menu Operation Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 1 2 Press the Point d d button to move the red frame pointer to the level that you want to set and then press the SELECT button. Move the red frame pointer to the level and pres[...]

34 Vi deo Input Press the Point 7 8 buttons to adjust the value. Press the MENU button to display the On-Screen Menu. Press the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 1 2 Press the Point d button to move the red frame pointer to the item you want to adjust and then press the SELECT button. The level of each i[...]

35 Vi deo Input To store the adjusted data, move the red frame pointer to the Store icon and press the SELECT button to display the Image Level Menu. Move the red frame pointer to the Image Level 1 to 4 and then press the SELECT button. A confirmation box will appear and select [Yes]. Image Level Menu Move the red frame pointer to the image icon to[...]

36 Keystone This function corrects distortion of a projected image. Select either Store or Reset with the Point 7 8 buttons, and then press the Select button. The keystone dialog box appears. Adjust keystone with the Point e e d d 7 8 buttons. Store . . . . . stores the keystone adjustment even if the AC power cord is disconnected. Reset . . . . .r[...]

37 Setting For reducing power consumption as well as maintaining the lamp life, Power management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more. If the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message " No[...]

38 Setting Remote control This projector has two different remote control codes; the factory- set normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in “Code 2,” both the projector a[...]

39 Wa r n i ng Indicator The WARNING indicator shows the state of the function which protects the projector. Check the state of the WARNING indicator and the POWER indicator to take proper maintenance. POWER LAMP REPLACE WARNING IN F WARNING flashing red Top Control The projector is shut down and the WARNING indicator is flashing red When the tempe[...]

40 Maintenance and Cleaning Turn off the projector, and disconnect AC power cord from the AC outlet. Turn the projector upside down and remove air filters by pulling the latches upward. 1 2 Removable air filters prevent dust from accumulating on the surface of optical elements inside the projector. Should air filters become clogged with dust partic[...]

41 Maintenance and Cleaning Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover. 2 4 Lightly wipe Projection Lens with a cleaning cloth. 3 Follow these[...]

42 When the life of the projection lamp draws to an end, LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. • Model No. [...]

43 Maintenance and Cleaning Lamp Replace Count er Be sure to reset the lamp replace counter after Lamp Assembly is replaced. When the lamp replace counter is reset, the LAMP REPLACE Indicator stops lighting. Note : – Do not reset the Lamp Replace Counter until after the projection lamp is replaced. Turn projector on, press the MENU button to disp[...]

44 Tr oubleshooting Before calling your dealer or service center for assistance, check the matters below once again. – Make sure you have properly connected the projector to peripheral equipment as described in the section "Installation" on P15-16. – Make sure all equipment is connected to AC outlet and turned on the power. – When y[...]

45 This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. Appendix W ARNING : High voltag es are used t o operat e this project or . Do not at tempt t o open the cabinet. If the problem still[...]

46 Appendix Check the indicators for projector condition. • • • lights green. • • • lights red. • • • off • • • flashes green. ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the L[...]

47 Appendix Menu T ree MODE 1 MODE 2 SVGA 1 - - - - Auto PC Adj. Fine sync Total dots Horizontal Vertical Current mode Clamp Display area Display area H Display area V Full screen Reset Store Quit Standard Real Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness Color temp. Red Green Blue Gamma Store Quit Normal True Wide Digital zoom [...]

48 Appendix Auto PAL SECAM NTSC NTSC4.43 PAL-M PAL-N Main menu V ideo Input Auto 1080i 1035i 720p 575p 480p 575i 480i Standard Cinema Image 1 Image 2 Image 3 Image 4 Quit Normal Wide 0 - 63 0 - 63 0 - 63 0 - 63 On / Off Main menu Set tings Volume Mute Quit On / Off Language Image Select Image Adjust Contrast Brightness Color Tint Red Green Blue Sha[...]

49 Appendix Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. Note: – Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 4[...]

50 Appendix Te c hnical Specifications 0.5" TFT Active Matrix type, 3 panels Multi-media Projector 4.6lbs (2.1 kg) 10.63" x 3.07" x 7.48" (270mm x 78.0mm x 190mm) (not including Adjustable Feet) 800 x 600 dots 1,440,000 (800 x 600 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Ad[...]

51 Appendix COMPUTER INPUT TERMINAL (ANALOG) Terminal : Analog RGB (Mini D-sub 15-PIN) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Pin Configuration Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration SERVICE PORT CONNECTOR ----- ----- ----- GND ----- ----- ----- ----- R X D ----- ----- GND ----- T X D ----- ----- ----- ----- ----- GND ----- ----- [...]

Part No. 610 321 9899 (1AA6P1P4799-A MP3BD-A) Printed in China © 2004 Eiki International, Inc. A-key to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-24-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com Canada Deutschland & Österreich EIKI[...]