Eiki Multimedia Projector LC-XT5 manual

MUL TIMEDIA PROJECT OR MODEL LC-XT5 O WNER ’S MANU AL ✽ Projection lens is optional.[...]

2 This Multimedia Projector is designed with most advanced technology for portabilit y , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palet te of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Simple Computer S ystem Set ting The projector has the Mul[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . . [...]

4 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L T AG E C O N ST I T UT I N G A R I S K O F E L E C T R I C SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBO[...]

5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all warnings and instr uctions marked on the p[...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flam[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. Installing the Projector in Proper Directions A void positioning the projector as described below when installing . Positioning Precautions Do not roll the projector more than 1 0 degrees from side to si[...]

8 Moving the Projector CA UTION IN CARR YING OR TRANSPORTING THE PR OJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuit able transport case. This m[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an A ST A approv ed BS 1362 fuse must be used of the same rating , marked thus AS A . If the fuse cover is det ac hable, never use the p[...]

1 0 u e r t Front o q w y i Bottom Back q Infr ar ed Remote Receiver (F ront) w Lens Cap (Option) e Projection Lens (Option) r Lev el and Pitch Adjust Handle !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !0 Exhaust V ent !1 Infr ar ed Remote Receiver (Rear) !2 Lamp Cover !3 I[...]

1 1 Input / Output T erminals and Jacks e  R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable. r USB CONNECT OR (Ser ies B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector[...]

12 y FOCUS but tons Adjust the f ocus. (p.27) q ZOOM but tons Zoom in and out the images. (p.27) t ON/ST AND-B Y butt on T urn the projector on or of f . (p.24) i INPUT 1/2 but ton Select an input source either INPU T 1 or INPU T 2. (pp.30-32) r A UT O PC ADJ . butt on Automatically adjusts the computer image to its optimum set ting.[...]

13 Indicators READ Y LAMP LAMP REPLA CE W ARNING TEMP . W ARNING TEMP . READ Y LAMP REPLA CE LAMP READ Y LAMP LAMP REPLA CE W ARNING TEMP . W ARNING TEMP . READ Y LAMP REPLA CE LAMP Fr ont Indicat ors Rear Indicators q w e r q w e r e W ARNING TEMP . indicat or This indicator flashes red when internal projector temperat ure is too high. (pp.61, [...]

Remote Control q t e !0 i !4 r !5 !3 !1 w y u o !7 !2 !8 !6 !9 @0 e LIGHT but ton Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU. (pp.25-26) t POINT ed 7 8 butt ons – Select an item or adjust the value in The ON-SCREEN MENU. –P an the image in DIGIT AL ZOOM +/– mode. (p.39) y[...]

Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size batter ies F or correct polarit y (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o insure safe operation, please observe the follo wing precauti[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when several projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first bef ore c hanging[...]

1 7 Installation Lens Installation Bef ore set ting up a projector , inst all Projection L ens on a Projector . 1 . Bef ore inst allation, c hec k where a projector is used and prepare a suitable lens. For the specifications of Projection L ens, ref er to the manual at tac hed separately or cont act sales dealer where you purc hased the projector .[...]

1 8 Picture Level and Pitch Adjustment Installation Picture tilt and projection angle can be adjusted with handles on both sides of a projector . Projection angle can be adjusted to 5.7 degrees upward. 1 2 3 LEVEL AND PI TCH AD JUST HANDLE AD JUST ABLE FEET Height of front f eet can be adjusted by t urning handles. Press the knob on the handle. The[...]

1 9 T erminals of Projector This projector applies v arious input/output terminals and 4 terminal slots for e xpansion to tune to diversity of signals from computers and video equipment. 4-built-in T erminal Slots enable you to arrange desired combinations of input sources just by c hanging T erminal Boards. F or T erminal Boards, contact sales dea[...]

20 Installation ANALOG vG B R H/HV V DIGITAL （ DVI-D) INPUT 1 R/C JACK USB RESET INPUT 2 INPUT 3 INPUT 4 SERIAL PORT IN SERIAL PORT OUT S-VIDEO VIDEO/Y Pb/Cb Pr/Cr Connecting to Computer V GA Cable Monitor Output Desktop type Laptop type T erminals of a Project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p l u g th e p ow e r co[...]

21 Installation Connecting to V ideo Equipment ANALOG G B R H/HV V DIGITAL(DVI-D) INPUT 1 R/C JACK USB RESET INPUT 2 INPUT 3 INPUT 4 SERIAL PORT IN SERIAL PORT OUT R S-VIDEO VIDEO/Y Pb/Cb Pr/Cr Video Source (e xample) Video Casset te Recorder Video Disc Pla yer RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment.[...]

22 NOTE ON THE POWER COR D A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C power cord must be used. If the supplied A C pow er cord does not match y our A C outlet, cont act your sales dealer . Pr ojector side A C Outlet side T o PO WER CORD CON[...]

23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet and t urn the MAIN ON/OFF Switc h to ON. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. The[...]

24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f . Af ter the projector is turned of f [...]

25 MENU AUTO PC ADJ. IMAGE SEL. SELECT ZOOM FOCUS LENS SHIFT ON/STAND-BY INPUT 1/2 INPUT 3/4 Side Contr ol SELECT butt on How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sect[...]

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 33). Used to select an image lev el among St andard, Real, and Image 1–1 0(p. 37). Used to adjust the size of the image. [Normal/T rue/Wide/ F ull screen/Custom/Ke ystone/Ceiling/Rear/R eset/Digit al zoom +/–] (pp.38[...]

27 Operating with Projector Control Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo ved up or do wn to 50 percent, or sidew ay s up to 1 0 percent from the central axis of the lens shif t. Lens Shif t Adjustment ✔ Note: • [...]

28 Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE function,[...]

29 Press the NO SH O W but ton on the remote control to blac k out the image. T o restore to normal, press the NO SHO W but ton again or press any other but ton. NO SHOW but t on KEY ST ONE butt on Reduce the upper width with P oint e but ton. Reduce the low er width with P oint d but ton. Reduce the lef t part with P oint 7 but ton. Reduce the rig[...]

30 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but tons on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPU T 4 as you press the INPU T but ton. Bef ore using the INPU T but ton on the remote control, you must select a correct input source b y On-Screen Menu and the latest input sou[...]

31 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. The Source Select Menu appears. 1 2 Use the P oint ed but tons to select the desired source an[...]

32 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. [...]

33 Computer System Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXGA+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 70–71). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a pr[...]

34 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T ot al dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed buttons t[...]

35 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It allo[...]

36 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Mov e the red arrow pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select Reset and press the SELECT but ton. A confirmation bo x appears and then select [Y es][...]

37 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Standard Pic[...]

38 ✔ Note: • T rue, Full screen, and Digital z oom +/– cannot be selected when no signal is detected in the PC System Menu. (p.33) • The projector cannot display and resolution higher than 160 0 x 1200. If your computer ’ s sc r e en r es o lu t i on i s h i gh e r t h an 16 0 0 x 12 0 0, lower the resolution before connecting the project[...]

39 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT button to e xpand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digital zoom + mode by pressing the D .ZOOM but ton on th[...]

40 A V S YS TEM MENU (VIDEO OR S-VIDEO) A V S YS TEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then press the SELECT [...]

41 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the des[...]

42 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note: • Wide cannot be operated when “720p, ” “1035i,[...]

43 Ke ystone This function is used to store or reset the k eystone cor rection when the A C pow er cord is unplugged. Use the P oint 7 8 but tons to switc h bet ween eac h option. Store . . . Keep the k eystone cor rection even when the A C pow er cord is unplugged. Reset . . Release the ke ystone correction when the A C power cord is unplugged. T [...]

44 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set t[...]

45 A uto pictur e control Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not want to apply the adjusted color[...]

46 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressive mode. Pres[...]

47 Pictur e Image Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, Korean, or J apanese. Use t[...]

48 This function allo ws you to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image. (pp. 37 , 41) • A signal from a computer can be captured up to XGA (1 024 X 7 68). • Certain signals m[...]

49 Change the Log o PIN code lock setting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 buttons to switc h On/Off , This function pre vents an unauthorized person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo canno[...]

50 Lamp control Choose the running speed of cooling f ans from the following options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control Remote contr ol Remote contr ol When pressing the SELECT but ton at Remote control, the R emote control code menu appears. The eight dif ferent remote control codes (Code 1–C[...]

51 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C power cord to the wall outlet. ✔ Note: • Make sure that the main switc h is ON, otherwise the On start function does not work. • Be sure to turn of f the projector properly (see “T urning Off the Projector” on pag[...]

52 Secur ity Ke y lock Ke y lock Secur ity Select Ke y lock and this box appears. Choose one of the alternatives with the P oint ed buttons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthorized persons. . . . . . Unloc ked. . . . . . Loc k the side control but tons.[...]

53 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 75, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST ARTED. The PIN code can be c hanged to your desired four -digit number . Press the P oint d bu[...]

54 F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the ne xt box appears. T est p[...]

55 Maint enance and Car e Air Filter Care and Cleaning T urn off the projector , and unplug the A C power cord from the A C outlet. 1 2 3 4 Pull out the air filter from the projector . Clean the filter with brush out dust and particles. Replace the air filter in a projector . AIR FIL TER CA UTION Do not operate the projector with the Air Filter(s) [...]

56 Lamp Management This P rojector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of all lamps and shows the status on screen or on the LAMP REPLA CE indicator . This function also automatically controls the Lamp Mode whe[...]

57 Maint enance and Care Chec k the number of lamp to be replaced on the Lamp Status Display . Remo ve the two scre ws on the Lamp Cover and press the but ton to open the Lamp Cov er . (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector and unplug the A C P ow er Cord. L[...]

58 Maint enance and Care ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing information to the dealer . ● Model No. of your pr ojector : LC-XT5 ● Replacement Lamp T ype No. : PO A -LMP1 09 (Service Parts No. 61 0 334 6267) Resetting the Lamp Counter Be sure to reset[...]

59 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. There is no guarantee of the same lif etime for eac h lamp. Some lamps may fail or termina[...]

60 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A void using an ex cessive amount of cleaner . Abrasiv e cleaners, solvents, or other harsh c h[...]

61 Maint enance and Care The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING indicators and the READ Y indicator to t ake proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector [...]

62 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Mak e sure you hav e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and pow er cords are properly connecte[...]

63 Pictur e is not br ight enough. – Chec k if “Contrast” or “Brightness” are adjusted properly . (See page 44) – Chec k if “Image lev el” is selected properly . (See pages 37 , 41) – Chec k the Lamp control function. ( See “SETTING” section on page 50) – Chec k the Lamp replace indicator . If it lights, the end of lamp lif [...]

64 W ARNING: High voltag es ar e used to oper ate this pr ojector . Do not at tempt to open the cabinet. If problems still persist after follo wing all operating instructions, cont act the dealer where y ou purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you how to obtain ser[...]

65 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. PIN code loc k Infor mation Ke y lock Screen Language Lamp mo[...]

66 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ Sy[...]

67 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided. Menu Logo Lamp control Both/F ront/Bac k Normal/Max P ower management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Ready Of f Shut down 1–30 Min. Q[...]

68 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red LAMP REPLA CE orang e The projector is of f . (The main switc h is OFF position or the A C power cord is unplugged.) The projector is in stand-by mode. P ress the ON/ST AND-B Y but ton t[...]

69 Indicat ors Pr ojector Condition LAMP red READ Y green W ARNING TEMP . red LAMP REPLA CE orang e The temperat ure inside the projector is elev ated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The projector cannot be t urned on. When the projector is cooled down enough and the temperat ure return[...]

70 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment is limited when selecting these modes. Appendix ✽ T rue cannot be selected when UXG A2, UXGA3, UXG A4 and UXGA5 are selected (p.38) ON-SCREEN DISP[...]

71 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. • Specifications are subject to c hange without notice. ON-SCREEN DISPLA Y RESOLUTION H-Fr eq.(kHz) V -Fr eq.(Hz) D-V GA 64[...]

72 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 22.87” x 9.902” x 32.1 1” (581 mm x 251 .5 mm x 81 5.5 mm) (Not including adjustable feet) Net Weight 80.3 lbs (36.5 kg) F eet Adjustment 0˚ to 5.7˚ P anel Resolution LCD Panel S ystem 1 .8” TFT A ctive Matrix type, 3 panels [...]

73 Optional Parts Model No. Option Slot Board (DVI) : AH-720 03 Option Slot Board (5-BNC) : AH-720 1 5 Option Slot Board (D-sub 15) : AH-72031 Option Slot Board (Dual-SDI) : AH-721 62 Option Slot Board (Network board) : AH-721 42 The parts listed belo w are optionally av ailable. When ordering those parts, specify the item name and Model No. to the[...]

7 4 Configurations of T erminals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Sense 0 V ert. sync. DDC Cloc k 9 13 1 0 12 1 1 14 15 CONTROL POR T CONNECTOR[...]

75 W rite down the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , contact the ser vice station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid.[...]

7 6 Dimensions Appendix 161 ° 14.74 (374.5) 1.38 (35) 10.61 (269.5) 7.01 (178) 7.01 (178) 8.27 (210) 1.57 (40) 8.27 (210) 3.66 (93) 22.93 (582.5) 17.56 (446) 3.26 (82.8) 9.72 (247) 9.9 (251.5) 2.36 (60) 5.7 ° 9.90 (251.5) 20.58 (522.7) 1.28 (32.5) 9.90 (251.5) 5.18 (131.5) 22.87 (581) 32.1 1 (815.5) 6.81 (173) Unit : inc h (mm) Appendix[...]

77 Serial Control Interface This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.1 1) Launc h a communication sof tware provided with PC and setup the communication condit[...]

78 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (ref er to the command table below . The projector decodes the command and ret urns the 'Charactor string' with the format belo w; For mat Command F unction Projector Ret urn [...]

U .S.A. EIKI International, Inc. 30251 Esperanza Ranc ho Sant a Margarit a CA 92688-21 32 U .S.A. T el : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457 -7878 E-Mail : usa@eiki.com Deutschland & Öst er r eich EIKI Deutsc hland GmbH Am F rauwald 1 2 6551 0 Idstein Deutsc hland T el : 061 26-9371 -0 Fax : 061 26-9371 -1 4 E-Mail : info@[...]