Electrolux 78001KF-N manual

7800 1KF-N Cer amic glass induction hob Installation and Oper ating Instructions[...]

2 Dear Customer , Please read these user in stru ctions caref ully and keep them to refer to later . Please pass the user instructions on to any future owner of the appli- ance. The following symbols ar e used in the text: 1 Safety instructions War ni ng ! Notes that concern your personal sa fety . Important! Notes that show how to avoid damage to [...]

3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Cooking surface layo[...]

4 Oper ating Instructions 1 Safety instructions 3 Please comply with thes e instructions. If you do not, any damage re- sulting is not covered by the warranty . 5 This appliance conforms with the following EU Dir ectives: – 73/23/EEC dated 19.02.1973 Low Voltage Dir ective – 89/336/EEC dated 03.05.1989 EMC Dire ctive inclusive of Amending Direc[...]

5 Safety during use • Remove stickers and film fr om the glass ceramic. • There is the risk of burns fr om the appliance if used carelessly . • Cables from electrical appliances must not touch t he hot surface of the appliance or hot cookware. • Overheated fat and oil can ignite qu ickly . When cooking with fat or oil (e.g. frying chips) do[...]

6 Description of the Appliance Cooking surface layout The cooking surface is divided into four cooking zones. In each cooking zone under the glass cer amic is an induction heating element, the mid- dle of each one being marked with a cross on the glass cer amic surface. Cookware can be placed on any of the cooking zones. But the cross must be compl[...]

7 Contr ol panel layout T ouch Control sensor fields The appliance is operated using T ouc h Control sensor fields. Functions are controll ed by touching sensor fi elds and confirmed by displays and acoustic signals. Touch the sensor fields fr om abov e, without covering other sensor fields. 1 War ni ng ! Risk of burns fr om heat emi tted. Lengthy [...]

8 Displays Residual heat indicator 1 War ni ng ! Risk of burns from r esidual he at. After being switched off, the cooking zones need some time to cool down. Look at the r esidual heat indicator h . 3 Residual heat can be used for melting and keeping food warm. The induction cooking zones cr eate the heat requir ed for cooking di- rec tl y i n t he[...]

9 Oper ating the appliance 3 Use the induction cooking zone s with suitable cookware. Switching the appliance on and off 3 After switching on, within appr ox. 1 0 seconds a heat setting or a func- tion must be set, otherwise the appl iance automatically switches itself off. Selecting the heat setting 3 The keep warm setting u lies between ¾ and ¿[...]

10 Switching the ST OP+GO function on and off The ST OP+GO function simultaneously swit ches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was pr eviously set. This function can be used to briefly in- terrupt and then continue the cookin g pr ocess e.g. to take a telephone call. 3 Timer funct[...]

11 Using the automatic warm-up function All cooking zones are equipped with an automati c warm-up function. The automatic warm-up function sets the c ooking zone to the hi ghest setting for a certain period of time and then automatically switches back to the cooking settin g that was originally set. 3 If during the automatic warm up a a higher heat[...]

12 Locking/unlocking the contr ol panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. 3 When you switch the appliance off, the locking function is automati- cally switched off. Control panel Display Switch o[...]

13 Using the child safety device The child safety device prevents unintentional use of the app liance. Setting the child safety device Releasing the child safety device Overriding the child safety device The child safety device can be releas ed in this way for a single cooking session; it remains activated afterwar ds. Step Control panel Display/Si[...]

14 Switching the power function on and off The power function makes mor e power available to the induction cooking zones, e.g. to bring a lar ge quantity of water to the boil quick- ly . The power function is activated for 1 0 minutes. After that the induc- tion cooking zone automatically sw itches back to heat setting 9. 3 If the power function ha[...]

15 Using the timer All cooking zones can use each use one of the two timer functions at the same time. 3 If a cooking zone is switched off, th e timer function set is also switched off. 3 If a heat setting is set on this cook ing zone in addition to a countdown timer , the cooking zone is switched off after the time set has elapsed. Selecting a coo[...]

16 3 If the pilot light is flashing more slowly , the heat setting indicator ap- pears again and the heat setting can be r e-set or modified. 3 If other timer func tions ar e set, af ter a few seconds the shortest re- maining time of all the timer func tions is displayed and the corre- sponding pilot light flashes. Setting the time Switching off th[...]

17 Changing the time Displaying the time r emaining for a cooking zone Switching off the acoustic signal Step Control panel field Display 1. Select cooking zone Pilot light of the cooking zone select- ed flashes faster The time r emaining is displayed 2. Touch or for the cooking zone se- lected 01 to 99 minutes After a few seconds the pilot light f[...]

18 Cooking over two cooking zones Large cookwar e can be heated with two cooking zones simultaneously . Either the two cooking zones on th e left-hand side or on the right- hand side of the cooking surface ar e suitable for this. 1. Place cookware centr ally on the two zones. The cookware must cover at least the middle of the two crosses. 2. Set th[...]

19 Induction cooking zones • In the event of overheating (e.g. when a pan boils dry) the cooking zone automatically switches itself off. _ is displayed. Before being used again, the cooking zone must be set to 0 and allowed to cool down. • If cookware that is not suitable is used, f flashes in the display and after 2 minutes the display for the[...]

20 Tips on cooking and frying 3 Information about acrylamides According to the latest scientific r esearch, inte nsive browning of food, especially in products containing st ar ch, may present a health risk due to acrylamide. Therefor e we recomm end cooking at low temperatur es and not browning foods too much.[...]

21 Cookwar e for induction cooking zones Cookware mat erial 3 Cookware for induction cooking zone s is labelled as suitable by the manufacturer . Suitability test Cookwar e is suitable fo r induction cooking, if … • ... a little water on an induction c ooking zone set to heat setting 9 is heated within a short time. • ... a magnet sticks to t[...]

22 Examples of cooking applications The information given in the following table is for guidance only . The power function is suitable for heating large quantities of liquid. Heat set- ting Cooking process suitable for Cook time Tips/Hints 0 Off position V Keeping food warm Keeping cooked foods warm as required Cover 1-2 Melting Hollandaise sauce, [...]

23 Cleaning and car e 1 Tak e c are ! Risk of burns from r esidual heat. 1 Important Sharp objects and abrasive clea ning materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after eac[...]

24 What to do if … Problem Possible cause Remedy The appliance cannot be switched on or is not oper- ating Mor e than 1 0 seconds have passed since th e appliance was switch ed on Switch the applia nce on again. The lock is switched on l Swit ch off the lock (See the section “Locking/un- locking the cont r ol panel”) The child safety device i[...]

25 If you ar e unable to r emedy the pro blem by following the above suggestions , please contact your local Service For ce Centr e. 1 War ni ng ! Repairs to the appliance ar e only to be carried out by quali- fied service engineers. Considerable danger to the user may r esult fr om improper r epair s. 3 If the appliance has been operated inco rr e[...]

26 Disposal 2 Packaging material The packaging materials are envir onmentally friendly and can be r ecy- cled. The plastic components are id entified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pa ckaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance The symbol W on the prod[...]

27 Installation Instructions Safety instructions The laws, or dinances, directives and st and ard s i n f orc e in th e c oun tr y o f use are to be followed (safety r egula tions, proper r ecycling in accord- ance with the regulations, etc.) Installation may only be carrie d out by a qualified electrician. The minimum distances to other a ppliance[...]

28 A device must be provided in the elec trical installation w hich allows the appliance to be disconnected fr om th e mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line pr otecting cut-outs, fuses (scr ew type fuses are to be r emoved from the holder), earth leakage trips and contactors. Sticki[...]

29 Assembly[...]

30[...]

31[...]

32 Rating Plate Induction 7,4 kW 55GDDD4AG 7800 1KF-N 2,2 kW 949 592 5 1 0 230 V 50 Hz AEG-ELECTROLUX[...]

33 W arr anty conditions Gr eat Britain Standard guar antee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG applian ce or any part thereof is proved to be defective by r eas on only of faulty workmanship or materials, we will, at our discretion r epair or replace the same FREE OF CHARGE for labour , mater[...]

34 Service and Spar e P arts If the event of your appliance requir ing service, or if you wish to pur- chase spare parts, please contac t Service For ce by telephoning: Y our telephone call will be automatically r outed to the Service Force Centre covering your post code ar ea. For the address of your local Servic e For ce Centre and further inform[...]

35[...]

www.electrolux.com www.aeg-electrolux.co.uk 822 930 186-B-061206-03 Subject to change without notice[...]