Electrolux EWF 147540 manual

EWF 147540 W .............................. .................. ................ ............ .......... ....... EN WA SHING MACHINE USER MANUAL[...]

Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Product description 4 Control panel 5 First use 7 Personalisation 8 Daily use 8 Helpful hints and tips 11 Washing programmes 12 Care and cleaning 15 What to do if… 19 Technical data 21 Consumption v alues 22 Installation 22 Electrical conne[...]

INSTALLATION • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be re- moved before use. Serious damage can occur to the product and to property if this is not adhered to. S[...]

PRODUCT DESCRIPTION Your new appliance meets all modern requir ements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows to- tal use of detergent and reduces wa ter consumption so saving energy. 4 5 1 2 3 6 1 Detergent dispenser drawer 2 Control panel 3 Door opening hand le 4 Rating Pl[...]

CONTROL PANEL Below is a picture of the control panel. It shows the program me sel ector dial as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages. 1 2 3 4 5 6 7 8 9 1 Programme selector dial 2 Display 3 TEMPERATURE button 4 SPIN reduction button 5 PREWASH button 6 EXTRA RINSE button 7[...]

DISPLAY 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.12 2.11 2.10 The display shows the following informa- tion: 2.1: Temperature value 2.2: Temperature icons , Cold . During the washing cy cle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub. 2.3: Spin value 2.4: Spin spe[...]

In the event of operating problems, some alarm codes can be displayed, for exam- ple (see paragraph «What to do if...»). • Delay Time value 2.10: Soil degree icons • Intensive • Normal • Daily • Light • Quick • Super Quick • Refresh • Super Refresh (see paragraph «Select Time Manager op- tion»). 2.11: Cloc k icon After the pro[...]

PERSONALISATION ACOUSTIC SIG NALS The machine is prov id ed with an acoustic device, which sounds in the following ca- ses: • at the end of the cycle • if there is a fault. By pressing the 5 and 6 buttons simultane- ously for about 6 seconds , the acoustic signal is deactivated (except if there is a fault). By press ing these 2 buttons again, t[...]

SELECT THE REQUIRED PROGRAMME BY TURNING THE PROGRAMME SELECTOR DIAL (1) Turn the programme selector dial to the re- quired programme. The washing machine will propose a temperature and automati- cally select the maximum spin value provi- ded for the programm e you have chosen. You can change these values by operating the corresponding buttons. The[...]

START THE PROGRAMME BY PRESSING BUTTON 8 To start the selected programme, press the button 8 , the green pil ot light of th e button 8 stops blinking. The icon 2.8 appears on the display to indicat e that the appliance starts operating and the door is locked. To interrupt a programme which is running, press the button 8 : the green pilot light star[...]

AT THE END OF THE PROGRAMME The machine stops au tomati cally. Three blinking zeros ( ) appear on the dis- play. The pilot light of button 8 goes off. Some acoustic signals sound for a few minutes. If a programme or an option that ends with water left in the tub has been set, the icon 2.8 remains displayed to indicate that the water must be emptie [...]

then rinse. Treat any residual marks with bleach. Ink: depending on the ty pe of ink, moisten the fabric first with acetone 1) , then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. DETERGENTS [...]

Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment SYNTHE TICS 60° - Cold Main wash - Rinses Maximum spin speed 900 rpm Max. load 3,5 kg - Reduced load 2 kg 1) Synthetic or mixed fabrics : underwear, coloured garments, non-shrink shirts, blouses. SPIN[...]

Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment DRAIN Draining of water Max. load 7 kg For emptying out the water of the last rinse in p ro- grammes with the Rinse Hold and Night Cycle option selec ted. SPIN Drain and long spin Maximum spin speed 14[...]

Programme Maximum and Minimum Te mperature Cycle Descriptio n Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Deterge nt Compartment SPORT LIGHT 30° Main wash - Rinses Maximum spin speed 700 rpm Max. load 2,5 kg Short programme for lightly soiled mixed fabric sports clothes. SPIN REDUCTION NO SPIN COOL CLEAN Cold Main wash - Rinses[...]

EXTERNAL CLEANING Clean the exterior cabin et of the applianc e with soap and water only, and then dry thoroughly. Important! Do not use meth ylated spirits, solvents or similar pr oducts to clean the cabinet. CLEANING THE DISPENSER DRAWER The detergent dispenser drawer should be cleaned regularly. The washing powder and additive dispens- er drawer[...]

Warning! 1. Disconnect the mains plug f rom the mains socket. 2. Do not remov e the filter while the appliance operates. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. To clean the drain pump: 1. Open the pump door. 2. Put a container below the recess of the drain pump to co[...]

11. Close the drain pump door. Warning! Never remove the pump cov er during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is se- curely re-tightened so as to stop leaks and young children being able to remove it. CLEANING THE WATER INLET FILTERS If you notice that the ma[...]

Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures. WHAT TO DO IF… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engi- neer. Before contactin g your local Service C[...]

Problem Possible ca use/Solution The machine doe s not empty and/or doe s not spin: The drain hose is squashed or kinked . • Check the drain hose connection. The drain filter is clogged. • Clean the drain filter. An option or a programme that e nds with the water stil l in the tub or that eliminates al l the spinning phas es has been selected. [...]

Problem Possible ca use/Solution The machine makes an un- usual noise: The machine is fitted with a type of motor which makes an unusual noise compared with ot her traditional motors. This new motor en- sures a softer start and more even distribution of the l aundry in the drum when spinning, as well as increased stability of t he machine. No water[...]

Average annual water consump- tion 1) litres 7899 Washing noise on normal 60° C cotton programme dB/A 54 Spinning noise on normal 60° C cotton programme dB/A 78 1) Complies with EN60456. CONSUMPTION VALUES Programme 1) Energy consumpti on (KWh) 2) Water consumption (litre) 2) White Cottons 95 °C 2.10 62 Cottons 60 °C 1.35 58 Cottons 40 °C 0.75[...]

2. Remove the power supply cabl e and the draining and inlet hose from the hose holders on the rear of the appl i- ance. 3. Unscrew the three bolts. 4. Slide out the relevant plastic spacers. 5. Open the porthole and remove the pol- ystyrene block fitted on the door seal. 1 2 6. Fill the smaller upper h ole and the two large ones with the correspon[...]

The rubber feet are pa rticularly recommen- ded on floating, slippe ry and wooden floors. Mount the rubber feet to prevent vibration, noises and displacement of the appliance during operation. Read carefully the inst ructions supplied with the kit. WATER INLET Warning! This appliance must be connected to a cold water supply. 1. Connect the water in[...]

The drain hose may be extended to a maxi mum of 4 metres. An additional drain hose and joining piece is available fr om your local Service Centre. ELECTRICAL CONNECTION Information on the el ectrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domest ic electrical installa- tion can take the ma x[...]

26 electrolux[...]

electrolux 27[...]

www.electrolux.com/shop 132949650-B -472011[...]