Encore electronic ENLWI-NX2 manual

ENLWI-NX2 IEEE 802.11n 2.0 Draft Wireless LAN PCI Adapter User’s Guide[...]

Federal Communication Commi ssion Interference Statement This equipment has been tested and found to comply with the limits for a Class B dig ital device, pursuant to Part 15 of the FCC Rules. These limits are de signed to pr ovide reasonable protection against harmful interference in a residential installation . This equ ipment generates, uses and[...]

Electromagnetic compatibility and Rad io spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipm ent This device is a 2.4 GHz wideban d transm ission system (transceiver), i ntended for use in [...]

[Hungarian] követelm ényeknek és az 19 99/5/EC iránye lv egyéb el õírásainak. Polski [Polish] Niniejszym Encore Electronics Inc o ś wiadcza, ż e ENLWI-NX2 jest z godny z zasadniczymi wym ogami oraz pozosta ł ymi stosownymi postanowieniami Dyrektyw y 1999/5/EC. Português [Portuguese] Encore Electronics Inc declara que este ENLWI-NX2 est?[...]

INTRODUCTION Congratulations on your pu rchase of the ENLWI-NX2 802.11n Wireless LAN PCI Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the ENLWI-NX2 802.11n Wireless L AN PCI Adapter, a desktop or laptop computer can communicate w ith another comput er[...]

UNPACKING AND SETUP This section provides unpacking and setup information for the ENLWI-NX2 Wireless 802.11n PCI Adapter. Unpacking The box should contain the following items:  One ENLWI-NX2 PCI Adapter  One Driver & Utility CD-ROM If any item is found missing or damaged, please contact your local reseller for replacement. Setup Before in[...]

IDENTIFYING EXTERNAL COMPONENTS LED Link The Link LED indicator light ed green when the ENLWI- NX2 802.11n Wireless LAN PCI Adapter is connected to wireless network s uccessfully. ACT (Activity) The ACT LED indicator when blinking gr een, the ENLWI-NX2 802.11n Wireless LAN Adapter is transmittin g or receiving data. Check the installation The LEDs [...]

SOFTWARE INSTALLATION This section describes how to install the driver and utility for the ENLWI-NX2 802.11n Wireless LAN PCI Adapter. This can be done prior to the hardware installation. Windows Based Utility Installation 1) Insert the Utility and Driver CD -ROM into your computer’s C 2) Follow the Instal l Shield Wiza rd Instruction s below 4[...]

5[...]

3) Click Finish to finish the installation and to restart the computer. 4) Plug the Wireless N PCI Adapter in to an available PCI slot on your computer. 6[...]

ENLWI-NX2 WIRELESS UTILITY SETTING The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double -click the utility icon that appears in the taskbar. The Wireless Adapter Config uration Utility is divided in to six sections: Link Info, Configuration, Site Survey , Profile, WPS and About. Link Information This[...]

Link Quality : Shows the link quality of the Wireless N PCI Adapter with the Access Point when operating under Infrastructure mode. Signal Strength: Shows the wireless signal stre ngth of the connection between the ENLWI-NX2 Wireless 802.11n PCI Adapter w ith the Acc ess Point. Data Rate: Shows the statistics of data transfer , and the calculation [...]

Authentication: The following options are available: Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA- TLS . Select Open System, Shared Ke y for WEP data encryption feat ure. Open or Shared Key Open System and Shar ed Key require the user to set a WEP key to exchange data with other wi reless clients that have the same WEP key . z [...]

WP A EAP-TLS If using the WPA/WPA2 EAP-TLS authenti cation method, please sel ect the Encryption type for TKIP or AE S then select the WPA/WPA2 Certificate from drop down list. 10[...]

Site Survey This screen allo ws the user to scan for available wireless networks ( wireless clients and Access Points). It als o allows the us er t o establish wireless communicati o ns with an available wireless network. Available Network – displays the wireless networks (wireles s clients and access points) that are within range. Select any one[...]

Profile Profile – The user can create an d manage the created prof iles for home, work or public areas. By double-click ing on one of the created pr ofile, the setting will adjust to the specific setting such as SSID, channel, and encry ption as saved by that particular profile. Add: Adds a profile. The f ollowing screen will appear. The user can[...]

WPS WiFi Protected Setup (WPS) is an optiona l certification prog ram from the Wi-Fi Alliance that is designed to ease the task of setting up an d configuring security on a wireless network. There ar e two methods used in the WPS as below instruction. Push the button on my access point Using the WPS configuration with the “Push the button on my a[...]

4) If the WPS configuration was successful , the follow window will show on. 5) If the WPS configuration was failed , the follow window will show on. 14[...]

Enter a PIN into my access point Using the WPS configuration with the “Enter a PIN into my acce ss point” method, the configuration steps as below: 1) Selected the “Enter a PIN into my access point”, th e PIN will be show on the button of the wi ndows. 2) Enter the PIN code into the WPS “Clin t PIN number” of you wireless access point o[...]

4) If the WPS configuration was successful , the follow window will show on. 5) If the WPS configuration was failed , the follow window will show on. 16[...]

About This screen d isplays in formatio n about th e Wireless N PCI Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be abl e to identify by version numbers. 17[...]

TECHNICAL SPECIFICATIONS Hardware Interface 32-bit PCI bus Standards IEEE 802.11n draft v2.0, IEEE 802.11b and IEEE 802.11g Antenna Two 2 dBi dipole ante nnas with SMA connector LED Indicator Link/ Activity Supported OS Windows XP, Vista Dimensions (LxWxH) 119.91x81x1.6 mm Temperature Operating: 0 ° ~ 40 ° C (32 ° ~ 104 ° F) Storage: -10 ° ~ 7[...]