EnGenius Technologies 3616A-SN1302 manual

~2~ Table of Contents Safety Inst ructions ........................................................................................ 4 General Safety Instructions ...................................................................... 4 Product Safety Instruct ions ...................................................................... 4 Battery Safet[...]

~3~ Advanced Oper ations ................................................................................. 31 Handset Regi stration.............................................................................. 31 Handset Group Su bscription .................................................................. 32 Registration of A dditional Base ......[...]

~5~ 3. Changes or modifications to this product not expressively approve d by the manufacturer will void the warr anty and the FCC authorization to operate the equipment. Use only manu facturer provided accessories. 4. Do not use the telephone near water. Never spill liquid of any kind on this product. 5. Unplug the product from the wall telephone [...]

~7~ Regulatory Information DuraFon 1X FCC ID: NI3-SN1302 IC: 3616A-SN1302 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause ha rmful interference, and 2) this device must accept any interferenc e received, including interference that may cause undesired opera tion.[...]

~9~ Equipment Checklist 1. In a Base + Handset package, plea se find the following component s: a. Base Station x 1 b. Base Antenna x 1 c. Base AC/DC Adaptor x 1 d. Handset x 1 e. Low Profile Handset Antenna x 1 f. Optimal Performance Handset Antenna x 1 g. 1700mA Li-ion Battery Pack x 1 h. C harger x 1 i. Charger AC/DC Adaptor x 1 j. Telephone Cor[...]

~11~ Handset Features Basic Handset Features 1. 4-lin e LCD (Liquid Crystal Display) a. The LCD display has LED (Light Emitting Diode) for ba cklighting. b. The 1 st line of LCD consists of icon s. c. Icons explanation from left to right (1) RSSI (Receive Signal Strength Indicator) During a call, the number of bars is proportional to the radio sign[...]

~13~ a. Five-level ringer volume selectio ns (high/ low/ vibrate/ vibrate-the n- ring/ off) b. Four ringer type selections 3. Caller ID a. Displays incoming call phone number and name on the LCD (nee ds Caller ID service from local telephone company) 4. Call waiting with caller ID a. Displays 2 nd incoming call information on the same p hone line w[...]

~15~ a. Allow user to pre-program the most frequ ently used PBX feature along with its feature code into Du raFon which is adjunct to the PBX system b. Up to 9 entries can be saved c. Once the feature and featur e codes being progra mmed, you can quick perform those functions du ring the call by pressing OPTION soft key. Administrator Features Hand[...]

~17~ Base Features Basic Base Station Features 1. Antenna a. The antenna port has a reverse thread connector ; to remove antenna or cable, turn clockwi se; to install, turn counterclockwi se. Improper installation may damage the connector b. When using an outdoor antenna, locate the antenna (not the base station itself) as high as po ssible for a c[...]

~19~ Charger Features 1. DC In Connects to Charger AC Adaptor. 2. Handset Chargi ng Slot a. Charge handset battery when handset is placed in cradle. b. Refer to the handset LCD for charging status (1) Charging: LCD screen showed “Charging” (2) Fully Charged: battery status bar stands still and the LCD s creen would display “Fully Charged” ([...]

~21~ Handset and Charger Ins tallation 1. Plug the tran sformer end of the Cha rger AC/DC adaptor into a standa rd AC electric power outlet, plug the other end into the “DC In ” jack on the back of the Charger. 2. Install battery pack onto the handset. 3. Install han dset antenna. 4. Place h andset onto the charger front sl ot. 5. The ph one sy[...]

~23~ Making a Telephone Call 1. Press TALK, wait for dial tone, and then enter phone number. 2. Alternatively, you can enter phone number first then press TALK key. When using this method, you can use the CLEAR (Left) and DELETE (Right) soft keys to edit the number entered. “Delete ” erases the last digit entered. “Clear” erases the ent ire[...]

~25~ handset responds. 4. Before a handset answers, the INTERCOM can be cancelled from the base by pressing INTERCOM again. Ho wever, once a hand set answers, only the answering handset can end the call. C. Intercom/2-Way fr om Handset to Base 1. Press Intercom key followe d by a two-digit base ID [Note: Base 1 ID as 10, Base 2 ID as 20, Bas e 3 ID[...]

~27~ [Note] Intercom numbers (Handset ID ) are not stored in the last 1 0 numbers dialed log. Receiving a Telephone Call 1. When an incoming call arrives, the ri nger will ring or vibrate unless the ringer has been turned off. 2. If the handset is on the charger cradl e (ringer will be t emporarily switched to “Ring” if it has been se t to “V[...]

~29~ effective only for the current call. Do Not Disturb (Silent Ri ng) 1. Enter the key sequence M ENU – Sounds – Ring Volume, then select “Off”. Press SAVE to confirm your choice. This will turn off the ringer until it is turn on again from the menu. 2. For temporary silencing th e ringer when an incoming call arrives, pre ss SILENT (Left[...]

~31~ Advanced Operations Handset Registration 1. If your handset(s) is purchased as part of a system, it has bee n pre- registered with the base st ation at the factory. 2. If Handset ID as “00,” that means it is a new handset or the ID has been erased. You need to register the handset with the base station. 3. Registration: a. Press MENU-6 to [...]

~33~ 3 rd , and 4 th base unit. 3. Registration: a. Press MENU-6 from HS 11 to enter the registration mode b. Press and hold the Registration (REG) button on that additional base unit, which you want to add into the system) for 2 seconds until 4 LEDs light up. c. Press handset key “3”, then enter the base ID i.e. 20 for 2 nd base, 30 for 3 rd b[...]

~35~ a. Press Menu-9 and enter the two-digit base ID to enter the System mode. b. Press 1 to enter Tone selection c. You can adjust the dial mode between Tone and Pulse. The default setting is Tone. d. The default setting is Tone. 2. Flash Time a. Press Menu-9 and enter the two-digit base ID to enter the System mode. b. Press 2 to enter Flash selec[...]

~37~ Notes: 1. When enter a phone number, the cursor aut omatically advances to the n ext digit field. Use ¿ or À scrolling key to move the cursor backward or forward to insert or delete. 2. When entering a name, the cursor aut omatic ally advances to the next character field if you press a different ke y for the next character. If you need to en[...]

~39~ confirm your selection. 3. To edit the Call barring code a. Once turn on the call barring feature, you can key in the “call barring” cod e. (1) Up to 5 digit can be edit to be call barring code. For example, if you want to block all call dialin g to Manhanttan, NY area, y ou can enter 1212 a s the call barring code. (2) If y ou base statio[...]

~41~ 2. Up to 9 most frequent ly used PBX feature codes can be pre-programmed. 3. Name and enter PBX feature codes: a. Press Menu (Right) soft key while the handset is in standby. b. Press “5” following by “0” to enter “PBX Options” menu. c. Press ADD soft key to edit a PBX feature to be memorized. d. Key in the name of the PBX features[...]

~43~ (2) Save: press “2” to edit and save or save without editing into the phonebook. (3) View Number: press “3” to view the complete number if the phone number is longer than 14 digit s. b. Press “2” to view the last 10 phone numbers received, starting from the most recent one. Use ¿ or À to scroll through the list. Press OPTION for [...]

~45~ (2) When finished; press SAVE to save change. g. Press “7” to change the LCD backlight: (1) Use ¿ or À to scroll through options: On, Off, and 8 Seconds. Default = 8 seconds, meaning that the backlight will turn off the backlight after 8 seconds of inactivity. (2) When finished; press SAVE to save change. h. Press “8” to edit Call Ba[...]

~47~[...]