Epson PowerLite G6870 XGA manual

PowerLite ® Pro G6070W/G6170/G6270W/G6470WU/ G6570WU/G6770WU/G6870/G6970WU User's Guide[...]

[...]

Contents PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU/ G6870/G6970WU User 's Guide .......................................................................................................................................................... 11 Introduction to Your Projector ............................................................[...]

Connecting to a Component-to-BNC Video Source .................................................................. 40 Connecting to a Component-to-VGA Video Source .................................................................. 41 Connecting to an S-Video Video Source ................................................................................[...]

Network Projector E-mail Alert Messages ..................................................................................... 79 Setting Up Monitoring Using SNMP ................................................................................................... 80 Selecting Other Network Settings.....................................................[...]

Image Aspect Ratio .......................................................................................................................... 129 Changing the Image Aspect Ratio ............................................................................................... 130 Available Image Aspect Ratios ..........................................[...]

Viewing 3D Images ......................................................................................................................... 162 Saving Settings to Memory and Using Saved Settings .................................................................... 162 Saving a Scheduled Event .........................................................[...]

Solving Problems .................................................................................................................................... 213 Projection Problem Tips ................................................................................................................... 213 Projector Light Status .............................[...]

Supported Video Display Formats .................................................................................................... 238 Notices ..................................................................................................................................................... 242 Recycling..........................................[...]

[...]

PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU/ G6870/G6970WU User's Guide Welcome to the PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU/G6870/G6970WU User's Guide . 11[...]

Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information Projector Part Locations Projector Features The PowerLite Pro G6070W, G6170, G6270W, G6470WU, G6570WU, G6770WU, G6870, and G6970WU projectors include[...]

• Wired network support for monitoring and control via remote network computer (PowerLite Pro G6870/G6970WU) • Variety of connection methods to a computer or video device including HDMI, BNC, DisplayPort, HDBaseT, and SDI (PowerLite Pro G6970WU) • Ports for connecting an external monitor and external speakers Easy-to-use setup and operation f[...]

Make sure your projector box included all of these parts: 1 Projector with standard zoom lens 1 2 Cable cover 3 Cable clip 2 4 Remote control 5 Remote control batteries (two AA alkaline) 6 Power cord 7 VGA computer cable 8 Lens unit screw 1 9 Projector documentation CD 10 Projector software CD (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G677[...]

1 Lens and lens unit screw not included with the PowerLite Pro G6070WNL/G6170NL/G6270WNL/G6470WUNL/G6570WUNL/G6770WUNL/G6870NL/G6970WUNL 2 2 clips included with the PowerLite Pro G6870/G6970WU Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain the following additional compon[...]

Epson offers the following optional accessories and replacement parts for your projector: Option or part Part number Genuine Epson replacement lamp (ELPLP76) V13H010L76 Air filter (ELPAF43) V13H134A43 Quick Wireless Connection USB key (ELPAP09; PowerLite Pro V12H005M09 G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) Wireless LAN module (ELPAP07; Power[...]

Option or part Part number HDMI audio video cable 6 feet (1.8 m) length AV22300-06 HDMI audio video cable 12 feet (3.6 m) length AV22300-12 Short throw zoom lens (ELPLU01) V12H004U01 Rear projection wide lens (ELPLR03) V12H004R03 Standard zoom lens (ELPLS07) V12H004S07 Middle throw zoom lens #1 (ELPLM04) V12H004M04 Middle throw zoom lens #2 (ELPLM0[...]

Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector. • Tips contain additional projection information[...]

Note: The PowerLite G6970WU projector is shown in most illustrations in this manual, unless noted otherwise. Projector Parts - Front/Top Projector Parts - Rear Projector Parts - Interface Ports Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front[...]

5 Lens unit release button 6 Remote receiver 7 Projector status lights 8 Wireless LAN indicator light (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) 9 Air filter/intake vent 10 Speaker (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) 11 Air filter cover latch 12 Cable cover 13 Vertical lens shift dial 14 Lens shift dial lock[...]

3 AC input port 4 Control panel 5 Cable clip slot Parent topic: Projector Part Locations Projector Parts - Interface Ports 1 Audio1 port 2 Computer port 3 BNC ports 4 Audio2 port 5 RS-232C port 6 Remote port 7 Audio L-R ports 8 Video port 9 S-Video port 10 Audio Out port 11 Monitor Out port 12 DisplayPort connector 21[...]

13 HDMI port 14 Audio3 port 15 HDBaseT port 16 Network LAN port 17 SDI port (PowerLite Pro G6970WU) 18 Service port Parent topic: Projector Part Locations Projector Parts - Base 22[...]

1 Front adjustable foot 2 Rear feet 3 Screw holes for cable cover 4 Security cable attachment point 5 Mounting bracket holes 6 Screw hole for lens unit release button Parent topic: Projector Part Locations Projector Parts - Control Panel 1 Power button 2 Source Search button (searches for connected sources) 3 Left arrow button and displays the Cont[...]

8 Esc button (cancels/exits functions) 9 Up arrow button and displays screen adjustment options 10 Menu button (accesses projector menu system) Parent topic: Projector Part Locations Related references Projector Light Status 24[...]

Projector Parts - Remote Control 25[...]

1 On button (turns power on) 2 Standby button (turns power off) 3 Source buttons (changes input source; some buttons may not function depending on the model) 4 Auto button (automatically adjusts position, tracking, and sync settings when projecting analog RGB signals from the Computer or BNC ports) 5 Aspect button (selects the image aspect ratio) 6[...]

27 Light button (lights up the buttons temporarily) 28 Indicator light (lights up when the remote control is in use) 29 Remote control signal emitter (emits remote control signals) Parent topic: Projector Part Locations 27[...]

Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Attaching and Removing a Lens Attaching and Removing the Cable Cover Attaching and Removing the Cable Clips Installing Batteries in the Remote Control Projector Placement You can place the projector on almos[...]

Front Rear Front ceiling 29[...]

Rear ceiling Note: Be sure to leave at least 20 inches (50 cm) of space in front of the air exhaust and intake vents and, when setting up multiple projectors, 20 inches (50 cm) of space between the projectors. 30[...]

If you mount the projector to the ceiling, install it within the following angles: • Vertically : Any angle in a complete 360 degree circle. • Horizontally : Within the adjustment range of the rear adjustable feet. If you project from the ceiling or from the rear, select the correct Projection setting and, if necessary, turn on the Inv Directio[...]

Use the tables here to determine approximately how far to place the projector from the screen based on the size of the projected image. (Conversion figures may have been rounded up or down.) You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada). 32[...]

1 Projection distance 2 Distance from the center of the lens to the base of the image (varies depending on vertical lens shift) 3 Center of lens PowerLite Pro G6170/G6870 4:3 Aspect Ratio Image or Screen with Standard Zoom Lens Screen or image size Projection distance (1) Vertical lens shift (2) Wide to Tele (Minimum to Top to Bottom Maximum) 30 in[...]

4:3 Aspect Ratio Image or Screen with Standard Zoom Lens Screen or image size Projection distance (1) Vertical lens shift (2) Wide to Tele (Minimum to Top to Bottom Maximum) 250 inches 200.0 × 150.0 263 to 474 inches –11.4 to 161.4 inches inches (669 to 1205 cm) (–29 to 410 cm) (508 × 381 cm) 300 inches 241.2 × 179.9 316 to 570 inches –13.[...]

16:10 Aspect Ratio Image or Screen with Standard Zoom Lens Screen or image size Projection distance (1) Vertical lens shift (2) Wide to Tele (Minimum to Top to Bottom Maximum) 250 inches 211.8 × 132.7 274 to 492 inches –23.4 to 155.9 inches inches (695 to 1251 cm) (–59 to 396 cm) (538 × 337 cm) 300 inches 254.3 × 159.1 329 to 591 inches –2[...]

Product Box Contents Connecting to Computer Sources Follow the instructions in these sections to connect a computer to the projector. Connecting to a Computer for VGA Video Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for DisplayPort Video and Audio Connecting to a Computer for 5 BNC Video Connecting to a Computer for [...]

Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable. Note: To connect a Mac that includes only a Thunderbolt port or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact App[...]

2. Connect the other end to the projector's DisplayPort connector. Note: If you have problems hearing audio through the DisplayPort connection, you can use the Audio3 port instead to play sound. Connect one end of an optional 3.5 mm stereo mini-jack audio cable to the projector's Audio3 port and the other end to your computer's audio[...]

Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it to the projector's DisplayPort or HDMI port, you can still play sound through the projector's speaker system (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU). Just connect an optional 3.5 mm stereo mini-jack audio cable as[...]

Connecting to an HDMI Video Source If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1. Connect the HDMI cable to your video source's HDMI output port. 2. Connect the other end to the projector's HDMI port. Note: The projector conve[...]

2. Connect the BNC connectors to the projector's R/Cr/Pr , G/Y , B/Cb/Pb ports. Parent topic: Connecting to Video Sources Related tasks Connecting to a Video Source for Sound Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video[...]

Related tasks Connecting to a Video Source for Sound Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using an optional S-Video cable. 1. Connect the S-Video cable to your video source's S-Video output port. 2. Connect the other end to the projector's S-Video port. Parent [...]

Related tasks Connecting to a Video Source for Sound Connecting to an SDI Video Source If your video source has an SDI port, you can connect it to the projector using an optional BNC video cable (PowerLite Pro G6970WU). 1. Connect the BNC video cable to your video source's SDI output port. 2. Connect the other end to the projector's SDI p[...]

2. Do one of the following: • Connect the other end of the cable to the projector's Audio port that corresponds to the Computer or BNC port you are using for video. • Connect the red and white plugs on the other end of the cable to the projector's Audio L-R ports. Parent topic: Connecting to Video Sources Related tasks Connecting to E[...]

See the documentation that came with the HDBaseT transmitter for instructions on connecting it to your video device or computer. 4. Turn on the projector and HDBaseT transmitter. Note: To enable communication from the Ethernet and serial ports on the transmitter, select On as the Control Communications setting in the projector's Extended menu.[...]

Parent topic: Projector Connections Related references Projector Setup Settings - Extended Menu Connecting to External Speakers To enhance the sound from your presentation, you can connect the projector to external self-powered speakers. You can control the volume using the projector's remote control. You can also connect the projector to an a[...]

Attaching and Removing a Lens Follow the instructions in these sections to attach or remove a compatible lens. Attaching the Lens Unit Removing the Lens Unit Parent topic: Setting Up the Projector Attaching the Lens Unit You can attach a compatible lens to the projector. Caution: Place the projector so it faces to the side or down to attach a lens [...]

1 Tighten 2 Loosen 2. Hold the lens unit with the white dot facing up. Insert the lens unit straight into the projector's lens socket and turn it clockwise until you hear it click into place. 48[...]

3. Insert the screw that came with the projector or the lens unit, and tighten it. This secures the lens unit release button and prevents the lens from accidentally being removed. 4. Set the Lens Type setting to the correct option in the projector's Extended menu. Parent topic: Attaching and Removing a Lens Related tasks Setting the Lens Type [...]

2. Remove the screw securing the lens unit release button. 3. Press and hold the lens unit release button as you turn the lens unit counterclockwise until you hear it click. 4. Gently pull the lens unit straight out of the projector. 50[...]

Parent topic: Attaching and Removing a Lens Attaching and Removing the Cable Cover You can attach the cable cover that came with your projector to hide the attached cables from view. 1. Bundle the cables together using a band or other fastener (not provided). 2. Place the cable cover on the projector as shown, guiding the cables through the notch o[...]

3. Tighten both cable cover screws. To remove the cover, loosen both screws and pull the cover off of the projector. Parent topic: Setting Up the Projector Attaching and Removing the Cable Clips You can install the cable clips that came with your projector to provide additional support to the power and HDMI cables. Note: The PowerLite Pro G6070W/G6[...]

2. Insert the end of the cable clip anchors into the cable clip slots near the power inlet and HDMI port. 1 Cable clip slot 2 Cable clip anchor 3 Cable clip 3. Place the open cable clips around the power and HDMI cables, but don't lock them into place. 4. Slide each cable clip onto the anchors and lock the clips onto the power and HDMI connect[...]

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries. 1. Remove the battery cover. 2. Insert the batteries with the + and – ends facing as shown. 54[...]

3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed. Parent topic: Setting Up the Projector 55[...]

Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Registering a Digital Certificate on the Projector Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Selecting Other Network Settings Controlling a N[...]

Note: If your projector is connected via a LAN cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the EasyMP Network Projection software (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU). Connecting to a Wired Network Selecting Wired Network Settings Parent [...]

3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 58[...]

6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Web Remote Password (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) or Web Control Password (PowerLite Pro G6870/G6970WU) lets you enter a password up to 8 alp[...]

• If you must set addresses manually, turn off DHCP and enter the projector's IP Address , Subnet Mask , and Gateway Address as needed. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter . 9. To prevent display of the IP address on th[...]

Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Selecting Wireless Network Settings in OS X Enabling WPA or EAP Security Parent topic: Using the Projector on a Network Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module. Do not[...]

3. Remove the screw securing the wireless LAN module stopper, then remove the stopper. 4. Insert the wireless LAN module into the port. 62[...]

5. Replace the wireless LAN module stopper and secure it using the screw you removed. 6. Close the air filter cover. 7. Plug in and turn on the projector. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB [...]

You see a screen like this: 3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector. 4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module. You see a projected message that the network information update is complete. 5. Remove the USB key. 6. Reinsert [...]

7. Connect the USB key to a USB port on your computer or laptop. Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe , then select Allow on the next screen. 8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yes to disable the firewal[...]

3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 66[...]

6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network. • Web Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web. (Default user name is EPSONWEB ; default passw[...]

Wireless LAN Menu Settings Parent topic: Wireless Network Projection Wireless LAN Menu Settings Setting Options Description Wireless LAN Power On Turns wireless LAN support on and off Off Wi-Fi Protected Setup To Setup Wizard Select To Setup Wizard to start the WPS Connection Setup utility Wireless LAN System 802.11b/g Sets the type of wireless LAN[...]

Setting Options Description SSID Up 32 alphanumeric characters Sets the SSID (network name) of the wireless LAN system the projector is connecting to Search Access Point To Search View Search for available wireless network access points in Advanced connection mode Channel 1ch In Quick connection mode, selects the frequency band 6ch (channel) used b[...]

2. Do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. 3. Click Connect . Parent topic: Wireless Network Projection Selecting Wireless Network Settings in OS X Before connecting to the pr[...]

3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Security menu and press Enter . 6. Select a WPA or EAP setting from the drop-down menu. 71[...]

7. Select the settings on the security menu as necessary for your network. 8. When you finish selecting settings, select Setup complete and follow the on-screen instructions to save your settings and exit the menus. Wireless Security Menu Settings Parent topic: Wireless Network Projection Wireless Security Menu Settings Settings on the Security men[...]

Setting Options Description User name Various user names up to 64 For WPA/WPA2-EAP security, characters selects the user name; automatically detected when using the PEAP-TLS or EAP- TLS EAP methods (You can enter up to 32 characters in the projector menu. To input more than 32 characters, use your Web browser. ) Password Various passwords up to 64 [...]

Setting Options Description Setting RADIUS Server Name On For WPA/WPA2-EAP security, selects whether to verify the Off authentication server name during certificate verification RADIUS Server Name Various server names up to 32 For WPA/WPA2-EAP security, characters selects the server name to verify Verify Exp. date of Server Cert. On For WPA/WPA2-EA[...]

Registering Digital Certificates from a Web Browser You can register the digital certificates on the projector for wireless LAN authentication. 1. Make sure your digital certificate file is compatible with projector registration. 2. Make sure the projector is turned on. 3. Start your web browser on a computer connected to the network. 4. Type the p[...]

7. Click the Browse button, select the certificate file, and click Open . 8. Enter a password in the Password box. 9. Click Set to adjust the certificate validity period. 10. When you finish registering the certificate, click Apply to finalize your changes and complete the registration. Digital Certificate Types for Registration via Web Control Par[...]

Specification Description Format PKCS#12 Extension PFX/P12 Encryption RSA Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512 Key length 512/1024/2048/4096 bit Common name Network host name Organization Optional Password Up to 32 alphanumeric characters; required Parent topic: Registering Digital Certificates from a Web Browser Setting Up Projector Network E-[...]

PowerLite Pro G6870/G6970WU • Select the Administrator Settings menu and press Enter , then select Mail Notification and press Enter . Turn on Mail Notification . PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU 78[...]

5. Enter the IP address for the SMTP Server option. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255). 6. Select a number for the SMTP server Port Number , from 1 to 65535 (default i[...]

Setting Up Monitoring Using SNMP Network administrators can install SNMP (Simple Network Management Protocol) software on network computers so they can monitor projectors. If your network uses this software, you can set up the projector for SNMP monitoring. 1. Press the Menu button. 2. Select the Network menu and press Enter . 3. Select Network Con[...]

PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x[...]

4. Do one of the following: • Select the Others menu and press Enter . PowerLite Pro G6870/G6970WU • Select the Administrator Setting menu and press Enter . PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU 82[...]

5. If available, select the Priority Gateway setting for your network. 6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to allow the projector to be detected. 7. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView setting to allow the projector to be detected.[...]

You see the Web Control screen. Note: If you connect from a web browser on a smartphone or tablet, a screen with two options is displayed. Select remote to display the Web Remote page, or select config to display the Web Control page. 4. To select projector menu settings, select the name of the menu and follow the on-screen instructions. 5. To cont[...]

1 Power on button control 2 Input source selection controls (some buttons may not be available depending on your available projector ports) 3 Freeze button control 4 A/V Mute button control 5 Page Up and Page Down button controls 6 Closed caption control 7 Volume button controls 8 Source search control 9 Standby button control 6. Select the icon co[...]

Note: If you want to use the Crestron RoomView system when the projector is turned off, you need to adjust the Standby Mode settings in the Extended menu. 1. Press the Menu button. 2. Select the Network menu and press Enter . 3. Select Network Configuration and press Enter . 4. Select the Others menu (PowerLite Pro G6870/G6970WU) or the Administrat[...]

PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU 5. Set the Crestron RoomView setting to On to allow the projector to be detected. Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the EasyMP Monitor software. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to s[...]

You see this screen: 3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons. You can scroll through button options at th[...]

Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Resizing the Image with the Zoom Ring Focusing the Image Using the Focus Ring Setting the Lens Type Setting the Screen Type Adjusting [...]

1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's power light turns orange. This indicates that the projector is receiving power, but is not yet turned on (it is in standby mode). Note: With Direct Power On turned on, the projector turns on as soon as you plug it in[...]

Parent topic: Using Basic Projector Features Related tasks Turning On the Projector Turning Off the Projector Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown. Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending up[...]

Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Extended menu and press Enter . 4. Select the Language setting and press Enter . 5. Select the language you want to use[...]

Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. To enlarge or reduce the image size, rotate the projector's zoom ring. Parent topic: Using Basic Projector Features Related references Projector Setup Settings - Extended Menu Related tasks Displaying a Test Patt[...]

2. To sharpen the image focus, rotate the projector’s focus ring. Focusing the Image with the Optional Short Throw Lens Parent topic: Using Basic Projector Features Related references Projector Setup Settings - Extended Menu Related tasks Displaying a Test Pattern Focusing the Image with the Optional Short Throw Lens If you installed the optional[...]

2. Carefully rotate the distortion ring all the way counter-clockwise. Note: Be careful not to shift the short throw lens when adjusting it to prevent the projected image from shifting. 3. Support the front of the lens with one hand and use the other to carefully rotate the focus ring until the center of the image is focused. 95[...]

4. Rotate the distortion ring until the edges of the image are also focused. 5. Rotate the focus ring again to focus the entire screen image. 6. If the center of the image out of focus, rotate the distortion ring again to bring the area into focus. Parent topic: Focusing the Image Using the Focus Ring Related references Projector Setup Settings - E[...]

You see this screen: 6. Select your model number and press Enter . 7. Press the Menu button to accept the changes. Parent topic: Using Basic Projector Features Setting the Screen Type You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you are using. 1. Turn on the projector and display an image. 2. Pr[...]

7. Adjust the aspect ratio for the projected image, if necessary. Parent topic: Using Basic Projector Features Related concepts Image Aspect Ratio Adjusting the Image Position Using Screen Position You can adjust the image position if there are margins between the edge of the image and the projected screen frame. Note: You cannot adjust the screen [...]

Setting the Screen Type Adjusting the Image Position Using Lens Shift If you cannot install the projector directly in front of the screen, you can adjust the position of the projected image using the lens shift feature. Follow these guidelines when using lens shift to adjust your images: • When adjusting the image height, position the image lower[...]

3. Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image as necessary. Note: You can move the image within the ranges shown below. You cannot move the image to both the horizontal and vertical maximum values. PowerLite Pro G6070W/G6270W/G6470WU/G6570WU/G6770WU/G6970WU 100[...]

PowerLite Pro G6170/G6870 1 Center of lens 2 Projected image when lens shift is set in the center 3 Maximum vertical adjustment range: V × 67% (PowerLite Pro G6070W/G6270W/G6470WU/G6570WU/G6770WU/G6970WU) V× 57% (PowerLite Pro G6170/G6870) 4 Maximum vertical adjustment range with maximum horizontal adjustment: V × 27% (PowerLite Pro G6070W/G6270[...]

4. When you are finished, slide the lens shift dial lock as shown to lock the dials. Parent topic: Using Basic Projector Features Displaying a Test Pattern You can display a test pattern to adjust the projected image without connecting a computer or video device. Note: The test pattern's shape is determined by the Screen Type setting. Be sure [...]

3. Press the left or right arrow buttons on the remote control or press Enter on the control panel to cycle through the available test patterns. 4. Adjust the image as necessary. 5. Press the Esc to exit the test pattern. Available Test Pattern Image Adjustments Parent topic: Using Basic Projector Features Available Test Pattern Image Adjustments Y[...]

Menu Settings Extended Multi-Projection • Brightness Level • Edge Blending 2 • Multi-screen 1 Except for custom Gamma settings 2 Except for the Black Level setting (PowerLite Pro G6870/G6970WU) Parent topic: Displaying a Test Pattern Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high[...]

3. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the [...]

Correcting Image Shape with H/V Keystone You can use the projector's H/V Keystone setting to correct the shape of an image that is unevenly rectangular on the sides. Note: For the best results, make sure the Lens Type setting in the projector's Extended menu is set correctly before making any keystone adjustments. 1. Turn on the projector[...]

3. Select the Settings menu and press Enter . 4. Select the Geometric Correction setting and press Enter . 5. Select the H/V-Keystone setting and press Enter . Then press Enter again. You see the H/V-Keystone adjustment screen: 107[...]

6. Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone correction and to adjust the image shape as necessary. V-Keystone H-Keystone 7. When you are finished, press Esc . After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Setting[...]

Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display[...]

4. Select the Geometric Correction setting and press Enter . 5. Select the Quick Corner setting and press Enter . Then press Enter again. You see the Quick Corner adjustment screen: Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes . 6. Use the arrow buttons on the projector or th[...]

1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menu button. 3. Select the Settings menu and press Enter . 4. S[...]

You see the Arc Correction adjustment screen. Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes . 6. Use the arrow buttons on the projector or the remote control to select the corner or side of the image you want to adjust. Then press Enter . 7. Press the arrow buttons to adjust t[...]

Correcting Image Shape with Curved Surface You can use the projector's Curved Surface setting to adjust the shape of an image projected on a curved surface (PowerLite Pro G6870/G6970WU). Note: For the best results, project from the front of the screen onto a surface with a uniform arc radius and with the lens centered horizontally using lens s[...]

3. Select the Settings menu and press Enter . 4. Select the Geometric Correction setting and press Enter . 5. Select the Curved Surface setting and press Enter . Note: If you see a confirmation message, press Enter . You see this screen: 6. Select the Correct Shape setting and press Enter . 114[...]

7. Use the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter . Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes . 8. Use the arrow buttons on the projector to adjust the image shape. Note: If the adjustment triangle turns[...]

9. Press the Esc button to return to the Curved Surface menu screen. 10. Repeat the previous three steps as necessary to adjust other image areas. If the image expands or contracts, continue with the next step to adjust the linearity. 11. Select one of the following from the Curved Surface menu screen: • Horizontal Linearity : Adjusts horizontal [...]

Related references Projector Setup Settings - Extended Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Point Correction Correcting Image Shape with Point Correction You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid. This is useful for adjusting overlapping areas in[...]

You see this screen: 6. Select the Point Correction setting and press Enter . 7. Select the number of grid lines to display and press Enter . Note: If you need to change the color of the grid lines, select the Pattern Color setting and select a suitable color. 8. Use the arrow buttons on the projector or remote control to move to the point on the g[...]

9. Use the arrow buttons to correct the image shape in all necessary directions. Note: You can press Enter to show or hide the image and grid to check the results. 10. Press Esc to return to the previous screen and select another point to correct, if necessary. 11. When you are finished, press Menu . Parent topic: Image Shape Related references Pro[...]

1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menu button. 3. Select the Settings menu and press Enter . 4. S[...]

You see this screen: 6. Select the Corner Type setting and press Enter . 7. Select one of the following: • Horizontal Corner when the surfaces line up horizontally • Vertical Corner when the surfaces line up vertically 8. Press the Esc button to return to the Corner Wall menu screen. 9. Select the Correct Shape setting and press Enter . 121[...]

10. Adjust the projector's position and use the lens shift option to center the image over the point where the two surfaces meet. (The rest of these steps show Horizontal Corner as the selected Corner Type but the steps are the same for Vertical Corner.) Note: You can press Enter to show or hide the image and grid to check the results. 122[...]

11. Use the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter . • For horizontal corners, adjust the top area using the lowest point (indicated by the blue arrow) as your reference. Adjust the lower area using the highest point (indicated by the pink arrow) as your reference. • For vert[...]

Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes . 12. Press and hold the arrow buttons on the projector or remote control to adjust the image shape. 13. Repeat the previous two steps as necessary to adjust other image areas. If the image expands or contracts, continue with the n[...]

Related references Projector Setup Settings - Extended Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Point Correction Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 49 feet (15 m) away. You can point it at the front or rear of the projector. Make sure tha[...]

4 ±30° 5 +10° to +50° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries. Parent topic: Using Basic Projector Features Related tasks Replacing the Remote Control Batteri[...]

• Press the button for the source you want on the remote control. 1 Computer port source 2 BNC port source 3 Video port source (composite video) 4 S-Video port source 5 Network source 6 DisplayPort source 7 HDMI port source 8 SDI port source (PowerLite Pro G6970WU) 9 HDBaseT port source Parent topic: Using Basic Projector Features Projection Mode[...]

Changing the Projection Mode Using the Remote Control Changing the Projection Mode Using the Menus Parent topic: Using Basic Projector Features Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. 1. Turn on the projector and display an image. 2. Hold down the A/V Mute button[...]

3. Select the Extended menu and press Enter . 4. Select the Projection setting and press Enter . 5. Select a projection mode and press Enter . 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal [...]

Changing the Image Aspect Ratio You can change the aspect ratio of the displayed image to resize it. Note: Set the Screen Type setting in the projector's Extended menu before changing the aspect ratio. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. The shape and size o[...]

Screen Type setting Available aspect ratios 16:10 Auto or Normal, 16:9, Full, Zoom, Native *Available only when projecting computer images, or from sources connected to the HDMI or HDBaseT port Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images in the same aspect ratio of [...]

Parent topic: Using Basic Projector Features Related references Image Quality Settings - Image Menu Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from[...]

Color Mode Description DICOM SIM 1 Best for projecting X-ray photographs and other medical images Multi-Projection Best for projecting from multiple projectors (reduces the color tone difference between images) 1 Available only when inputting RGB signals Note: The DICOM SIM Color Mode is for reference purposes only and should not be used to make me[...]

4. Select the Auto Iris setting and select High Speed . Note: Select Normal for quieter performance. You can turn Auto Iris on or off for each Color Mode that supports the feature. You cannot change the Auto Iris setting when you are using a Closed Caption setting. 5. Press Menu or Esc to exit the menus. Parent topic: Color Mode Controlling the Vol[...]

1. Press the Menu button. 2. Select the Extended menu and press Enter . 3. Select the Operation setting and press Enter . 4. Select the Date & Time setting and press Enter . You see a screen like this: 5. Select the Date & Time setting and press Enter . 6. Use the displayed keyboard to enter the date and time. 7. When you are finished, pres[...]

Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projecting Two Images Simultaneously Using Multiple Projectors Viewing 3D Images Saving S[...]

Parent topic: Adjusting Projector Features Related references Projector Setup Settings - Extended Menu Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point t[...]

2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into. • Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary. Press and hold the E-Zoom + button to zoom in more quickly. • To pan around the[...]

• Time/Schedule Protection password prevents anyone from changing the projector's time or schedule settings. Setting a Password Selecting Password Security Types Entering a Password to Use the Projector Saving a User's Logo Image to Display Parent topic: Projector Security Features Setting a Password To use password security, you must s[...]

4. Press and hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted." 6. Press Esc to return to the menu. 7. Make a note of the password [...]

1. To prevent unauthorized use of the projector, select Power On Protection , press Enter , select On , press Enter again, and press Esc . 2. To prevent changes to the User's Logo screen or related display settings, select User's Logo Protection , press Enter , select On , press Enter again, and press Esc . 3. To prevent changes to networ[...]

1. Press and hold down the Num button on the remote control while you enter the password using the numeric buttons. Note: The default password is 0000 . The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again. Enter the correct password to proc[...]

2. Press the Menu button, select the Extended menu, and press Enter . 3. Select the User's Logo setting and press Enter . You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter . You see a selection box overlaying your image. 5. Use the arrow buttons on the remote control to surround[...]

You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter . You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter . You see a completion message. 9. Press Esc to exit the message screen. 10. Select the Extended menu and press Enter . 11. Select Display and press[...]

2. Select the Settings menu and press Enter . 3. Select the Control Panel Lock setting and press Enter . 4. Select one of these lock types and press Enter : • To lock all of the projector's buttons, select Full Lock . • To lock all buttons except the power button, select Partial Lock . You see a confirmation prompt. 5. Select Yes and press[...]

• Use the security slot on the projector to attach a Kensington lock. See your local computer or electronics dealer for purchase information. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture. Note: Do not pass drop-prevention cables through the security cable at[...]

1. Press the Split button on the remote control. The currently selected input source moves to the left side of the screen. 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter , select the input source, select Execute , and press Enter . (You can also change image so[...]

7. To exit the split screen feature, press the Split or Esc button. Parent topic: Adjusting Projector Features Using Multiple Projectors You can combine the projected images from two or more projectors to create one large image. The following two options are available: • Project different images from each projector and create one seamless image ?[...]

Follow the instructions in these sections to setup and project from multiple projectors. Projector Identification System for Multiple Projector Control Adjusting the Position of the Projected Image From Multiple Projectors Scaling an Image Adjusting the Lamp's Brightness Blending the Image Edges Adjusting the Black Level Matching the Image Col[...]

4. Select Projector ID and press Enter . 5. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter . Repeat these steps for all the other projectors you want to operate from one remote control. Parent topic: Projector Identification System for Multiple Projector Control Se[...]

3. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. Note: If you don't know the projector's ID, hold down the ID button and press the Help button to temporarily display the projector's ID on the screen. If the batteries are left out of the[...]

Parent topic: Using Multiple Projectors Related concepts Projector Placement Related tasks Displaying a Test Pattern Adjusting the Image Position Using Lens Shift Resizing the Image with the Zoom Ring Correcting Image Shape with Quick Corner Correcting Image Shape with Point Correction Scaling an Image You can project the same image from multiple p[...]

5. Select the Scale Mode setting and select one of the following options: • Zoom Display : Maintains the image aspect ratio as you scale the image • Full Display : Adjusts the image to the projector's screen size as you scale the image 6. Select one or more of the following scaling options and adjust it as necessary: • – or + : Scales [...]

Parent topic: Using Multiple Projectors Adjusting the Lamp's Brightness When projecting with multiple projectors, you must adjust the brightness setting so that all projectors are as bright as the darkest lamp. Note: Even after adjusting the brightness levels, the brightness of each lamp may not match exactly. 1. Turn on all the projectors and[...]

1. Press the Menu button. 2. Select the Extended menu and press Enter . 3. Select the Multi-Projection setting and press Enter . 4. Select the Edge Blending setting and press Enter . You see this screen: 5. Turn on the Edge Blending , Guide Display , and Pattern Guide settings. Note: If the projected guide is unclear, try changing the Guide Colors [...]

8. Select the Blend Range setting and select the width of the blended area. Set the range so that the displayed guides are at the edges of the overlapping area between the two images. 9. Press Esc to go back to the previous screen. 10. Select the Blend Curve setting (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) and select a gradient f[...]

Adjusting the Black Level When two images overlap, the overlapping area can be different in brightness and tone from the areas that do not overlap. You can use the projector's Black Level setting to reduce this difference and make it less noticeable (PowerLite Pro G6870/G6970WU). Note: • You cannot adjust the black level when a test pattern [...]

You see this screen: 5. Select the Black Level setting and press Enter . You see this screen: 6. Select the Area Correction setting and press Enter . 158[...]

The points you can use to set the range for black level adjustments are displayed. Note: The points displayed differ depending on the edge settings ( Top Edge , Bottom Edge , Right Edge , Left Edge ) and the selected Geometric Correction setting. For example, if Left Edge is set and 5 × 5 is selected for the Point Correction setting, you see a scr[...]

8. Use the arrow buttons to move the point to the edge of the blending area. 9. To move another point, press the Esc button and repeat the previous two steps. 10. When you are finished, press the Esc button twice and select Yes when you see the confirmation message to return to the Black Level menu screen. Note: Changing any of the Top Edge , Botto[...]

13. When you are finished, press the Menu button to exit. Parent topic: Using Multiple Projectors Matching the Image Colors You can match the display quality of multiple projectors that will project next to each other. Note: Make sure you select Multi-Projection or 3D Multi-Projection (for 3D images) for the color mode. Brightness and colors may no[...]

11. Adjust the Color Correct. settings for green-to-red ( G/R ) and blue-to-yellow ( B/Y ) balance for all the levels on both projectors in the same way. 12. If you need to match more projectors, repeat these steps matching projector 3 to projector 2, 4 to 3, and so on. Parent topic: Using Multiple Projectors Related concepts Color Mode Viewing 3D [...]

You see this screen: 5. Select one of the following options: • Load Memory : Overwrites your current settings with saved settings • Save Memory : Saves your current settings to memory (10 memories with different names are available) Note: A memory name that has already been used is indicated by a green mark. Saving over a previously saved memor[...]

3. Select the Schedule Settings setting and press Enter . The Schedule Settings screen appears. 4. Select the Schedule menu and press Enter . 5. Select Add New and press Enter . 6. In the Event Settings section, select the events you want to have occur. (Select No Change for events that you do not want to occur.) 7. In the Date/Time Settings sectio[...]

One-time event Reoccurring event Communication is on/off Event is invalid Parent topic: Saving a Scheduled Event Editing a Scheduled Event You can edit any currently scheduled event. 1. Press the Menu button. 2. Select the Extended menu and press Enter . 3. Select the Schedule Settings setting and press Enter . You see a screen like this: 4. Press [...]

7. When you are finished, select Return and press Enter . 8. Select Setup complete and select Yes to save your changes. Note: To delete all scheduled events, select Schedule Reset and select Yes . Parent topic: Saving a Scheduled Event Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them [...]

Saving Settings to a USB Flash Drive You can save the projector settings you want to transfer to a USB flash drive (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU). Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly. 1. Turn off the projector and unplug the power cord from the proje[...]

4. When the power, Lamp, and Temp lights turn orange, release the Esc button. The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the power light turns orange and the projector enters standby mode. Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing[...]

2. Insert the flash drive into the wireless LAN module port. Note: Connect the flash drive directly to the projector. Do not use a hub. 3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When the power, Lamp, and Temp lights turn orange, release the Menu but[...]

5. Once the projector enters standby mode, remove the flash drive. Parent topic: Copying Menu Settings Between Projectors Related references Projector Light Status Saving Settings To a Computer You can save the projector settings you want to transfer to a computer (PowerLite Pro G6870/G6970WU). Your computer must be running one of the following ope[...]

3. Connect the other end to any available USB port on your computer. 4. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet. 5. When the power, Lamp, and Temp lights turn orange, release the Esc button. The projector shows up as a removable disk on your computer. 6. [...]

• OS X 10.6.x • OS X 10.7.x • OS X 10.8.x • OS X 10.9.x • OS X 10.10.x Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have to repeat your adjustments. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector&[...]

5. When the power, Lamp, and Temp lights turn orange, release the Menu button. The projector shows up as a removable disk on your computer. 6. Copy the pjconfdata.bin file from your computer to the removable disk. Note: Do not copy any other files to the removable disk. 7. Once the file has copied, do one of the following: • Windows: Open the My [...]

Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settin[...]

You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter . 4. Press the up or down arro[...]

Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Colo[...]

Setting Options Description Sharpness Varying levels available Adjusts the sharpness or softness of image details Color Temp. (absolute color Varying levels available Sets the color tone based on temperature) color temperature Advanced Various options available Adjusts the gamma levels and intensity of individual hues in the image Auto Iris Off Adj[...]

Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. Note: You can restore the default settings of the Position , Tracking , and Sync settings [...]

Setting Options Description Resolution Auto Sets the input signal resolution from an analog RGB computer Normal connection Wide Auto : detects the resolution Manual automatically Normal : for 4:3 or 5:4 screens Wide : for widescreen Manual : allows you to specify a resolution Tracking Varying levels available Adjusts signal to eliminate vertical st[...]

Setting Options Description Frame Interpolation Off Smooths fast moving video by comparing consecutive frames (PowerLite Pro G6470WU/ Low and inserting an intermediate G6570WU/G6770WU/G6970WU Normal frame between them ) High Noise Reduction Off Reduces flickering in analog images in two levels; cannot be NR1 set if Image Processing is set to NR2 Fa[...]

Setting Options Description Video Signal Auto Specifies the signal type from the input sources connected to the Various video standards video ports Auto : detects signals automatically Aspect See the list of available aspect Sets the aspect ratio (width-to- ratios height ratio) for the selected input source Scale Various scale options When using mu[...]

Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. 182[...]

Setting Options Description Geometric Correction H/V-Keystone Adjusts the projected image shape Quick Corner H/V Keystone : lets you manually Arc Correction correct the angles of the (PowerLite Pro horizontal and vertical sides G6070W/G6170/G6270W/G6470 Quick Corner : select to adjust WU/G6570WU/G6770WU/) the position of the four corners Point Corr[...]

Setting Options Description Power Consumption Normal Selects the brightness mode of the projector lamp Temp Interlock Normal : sets maximum lamp ECO brightness Temp Interlock : automatically dims the lamp if the surrounding temperature is too high for normal operation ECO : reduces lamp brightness and fan noise, and saves power and lamp life Volume[...]

Parent topic: Adjusting the Menu Settings Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Display — See the next table in this topic Closed Caption Off Controls use of closed captions and selects the closed caption CC1[...]

Setting Options Description Projection Front Selects the way the projector faces the screen so the image is Front/Ceiling oriented correctly Rear Rear Ceiling Direction Varying levels available Selects the installation angle for the projector; the projector's fan may get louder depending on the direction angle selected Operation — See the la[...]

Setting Options Description Standby Mode Communication On Enable this setting to allow the following operations to occur Communication Off when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On ) • Communication from the HDBa[...]

Setting Options Description Multi-Projection Brightness Level Select various options when projecting from multiple (not available for PowerLite Pro projectors G6470WU) Brightness Level : adjusts the Edge Blending brightness of the lamp; Power Multi-screen Consumption in the Settings menu must be set to Normal to Projector ID use this setting Edge B[...]

Setting Description Display Background Selects the screen color or logo to display when no signal is received Startup Screen Controls whether a special screen appears when the projector starts up A/V Mute Selects the screen color or logo to display when A/V Mute is turned on Standby Confirmation Displays a confirmation message after pressing the St[...]

Setting Options Description BNC Sync Termination — Sets the termination for the signal from the BNC port (normally should be off unless analog termination such as for switchers is necessary) Remote Control Type Normal Select Normal to use the remote control that came with the Simple projector or Simple to use a different Epson projector remote co[...]

Setting Options Description Date & Time — Adjusts the projector's system time and date settings Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. 191[...]

Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details (PowerLite Pro Antenna level G6070W/G6170/G6270W/ Projector Name G6470WU/G6570WU/G6770WU SSID ) DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code Net. Info - Wired LAN Projector Name Displays wired network status and d[...]

Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source. 1[...]

Setting Options Description Projector Info Lamp Hours Displays the number of hours ( H ) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is connected Input Signal Displays t[...]

Parent topic: Adjusting the Menu Settings Related references Optional Equipment and Replacement Parts Projector Lamp Specifications Event ID Code List If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the solution to the projector problem associated with the code. Event ID code Cause and solution [...]

Event ID code Cause and solution 0898 Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are not using DHCP, turn off the DHCP setting in the Network menus. 0899 Communication error. Restart the EasyMP Network Projection program. 089A The projector's EAP authentication type does not match the network. Check the wi[...]

You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset Lamp Hours option, or reset the saved names and settings in the Save Memory list using the Reset Memory option. You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network [...]

Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best. You may need to clean the lens periodically, and clean the a[...]

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Do not spray any liquid directly on the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner or any harsh materials to clean th[...]

Cleaning the Air Filter You need to clean the projector's air filter in the following situations: • The filter or vents get dusty. • You see a message telling you to clean it. • The projector's filter light flashes green. 1. Turn off the projector and unplug the power cord. 2. Slide the air filter cover latch and open the air filter[...]

3. Pull the air filter out of the projector. 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not use canned air; the gases may leave[...]

5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 6. Place the air filter back in the projector as shown and push gently until it clicks into place. 7. Close the air filter cover. Parent topic: Air Filter and Vent Ma[...]

Related references Projector Light Status Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a t[...]

3. Pull the air filter out of the projector. Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover. 204[...]

Parent topic: Air Filter and Vent Maintenance Related references Projector Light Status Optional Equipment and Replacement Parts Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system. Replace the lamp as soon as possible when the following occur[...]

3. Use the screwdriver included with the replacement lamp to loosen the screws securing the lamp cover, and then remove the lamp cover. Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful removing any broken glass to avoid injury. 4. Loosen the screws securing the lamp to the projector. The screws do not[...]

5. Hold the lamp by its handle and gently pull it out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. 207[...]

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure. 7. Push in the lamp firmly and tighten the screws to secure it. 8. Replace the lamp cover and tighten the screws to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new la[...]

Related references Optional Equipment and Replacement Parts Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly. Note: Do not reset the lamp timer if you have not replaced the lamp to av[...]

Parent topic: Projector Lamp Maintenance Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and [...]

3. Insert the batteries with the + and – ends facing as shown. 4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallow[...]

Transporting the Projector The projector contains precision parts, some of which are glass. Follow these guidelines to transport, ship, or store the projector safely: • Remove any equipment connected to the projector. • Use two ore more people to unpack or lift the projector. • Do one of the following: • If you are using the standard zoom l[...]

Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or Sound Problems Solving Projector or Remote Control Operation Problems Solving Network Problems Where to Get Help Projection Problem Tips If the project[...]

Projector Light Status The lights on the projector's control panel indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. 1 Power light 2 Lamp light 3 Temp (temperature) light 4 Filter light Power light Lamp Temp light Filter light Status and sol[...]

Power light Lamp Temp light Filter light Status and solution light Flashing red Off Flashing Off Projector is too hot. orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • Make sure the environmental temperature is not too hot. Red Off Red Off Projecto[...]

Power light Lamp Temp light Filter light Status and solution light On Off Off Flashing Low air flow through the projector. orange • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. Re[...]

Power light Lamp Temp light Filter light Status and solution light Flashing orange Flashing Flashing Off When transferring settings between rapidly orange orange rapidly projectors, writing may have failed and a rapidly projector error may have occurred. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pa[...]

Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound. Solutions When No Image Appears Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears Solutions When Only a Partial Image Appears Solutions When the Image is Not Recta[...]

• For sources connected to the DisplayPort , change the DisplayPort EQ Setting in the Signal menu. Parent topic: Solving Image or Sound Problems Related concepts Projector Connections Related references Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Related tasks Unlocking the Pr[...]

3. If the same image is not displayed by the laptop and projector, check the Windows Display utility to make sure the external monitor port is enabled and extended desktop mode is disabled. (See your computer or Windows manual for instructions.) 4. If necessary, check your video card settings and set the multiple display option to Mirror or Duplica[...]

• Try adjusting the image position using the Screen Position menu setting. • Press the Aspect button on the remote control to select a different image aspect ratio. • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the projector returns to a full display. • Check the cables connecting the computer[...]

Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: • Separated from the power cord to prevent interference • Securely connected at both end[...]

Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Position the projector close enough to the screen. • Position the projector so the keystone adjustment angle is not so wide that it distorts the image. • Adjust the Sharpness setting[...]

• If you are using the ECO Power Consumption setting, try selecting Normal or Temp Interlock in the projector's menus. • Position the projector close enough to the screen. • If the image has been progressively darkening, you may need to replace the projector lamp soon. Parent topic: Solving Image or Sound Problems Related concepts Projec[...]

Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Related tasks Connecting to a Computer for Sound Connecting to a Video Source for Sound Connecting to External Speakers Solving Projector or Remote Control Operation Problems Check the solutions in these sections if you have problems operating [...]

Projector Light Status Related tasks Unlocking the Projector's Buttons Solutions to Problems with the Remote Control If the projector does not respond to remote control commands, try the following solutions: • Check that the remote control batteries are installed correctly and have power. If necessary, replace the batteries. • Make sure yo[...]

Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control. • If you have entered an incorrect password too many times and see a message displaying a request code, write down the [...]

Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make sure the projector is turned on and connected to the network correctly. (If an error shut down the projector, it cannot send an e-mail.) • Make sure you set up the [...]

Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Frid[...]

Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dimension Specifications Projector Electrical Specifications Projector Environmental Specifications Projector Safety and Approvals Specifications Supporte[...]

PowerLite Pro G6170 : Normal or Temp Interlock Power Consumption mode: White light output 6500 lumens (ISO 21118 standard) Color light output 6500 lumens ECO Power Consumption mode: White light output 4940 lumens (ISO 21118 standard) PowerLite Pro G6270W : Normal or Temp Interlock Power Consumption mode: White light output 6500 lumens (ISO 21118 st[...]

PowerLite Pro G6770WU/G6970WU : Normal or Temp Interlock Power Consumption mode: White light output 6000 lumens (ISO 21118 standard) Color light output 6000 lumens ECO Power Consumption mode: White light output 4200 lumens (ISO 21118 standard) PowerLite Pro G6870 : Normal or Temp Interlock Power Consumption mode: White light output 7000 lumens (ISO[...]

Focus adjustment Manual Zoom adjustment Manual Zoom ratio 1:1.8 (Tele-to-Wide) Internal sound system PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU : 10 W monaural PowerLite Pro G6870/G6970WU : N/A Noise level PowerLite Pro G6070W/G6170/G6570WU : 37 dB (Normal Power Consumption mode) 31 dB (ECO Power Consumption mode) PowerLite Pro G6470[...]

Projector Lamp Specifications Type UHE (Ultra High Efficiency) Power consumption 380 W Lamp life PowerLite Pro G6070W/G6470WU : Normal Power Consumption mode: Up to about 3000 hours ECO Power Consumption mode: Up to about 4000 hours PowerLite Pro G6170/G6570WU : Normal Power Consumption mode: Up to about 2500 hours ECO Power Consumption mode: Up to[...]

Projector Dimension Specifications Height (excluding feet) 5.7 inches (144 mm) Width 19.9 inches (505 mm) Depth 15.0 inches (382 mm) Weight PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU : (with standard lens and without cable cover) 21.8 lb (9.9 kg) PowerLite Pro G6870/G6970WU : 21.4 lb (9.7 kg) (The standard lens weighs approximately 1[...]

Power consumption Operating: (100 to 120 V) PowerLite Pro G6070W : Normal Power Consumption mode: 498 W ECO Power Consumption mode: 421 W PowerLite Pro G6170/G6570WU : Normal Power Consumption mode: 528 W ECO Power Consumption mode: 421 W PowerLite Pro G6470WU : Normal Power Consumption mode: 468 W ECO Power Consumption mode: 421 W PowerLite Pro G6[...]

Power consumption Operating: (220 to 240 V) PowerLite Pro G6070W : Normal Power Consumption mode: 477 W ECO Power Consumption mode: 405 W PowerLite Pro G6170/G6570WU : Normal Power Consumption mode: 504 W ECO Power Consumption mode: 405 W PowerLite Pro G6470WU : Normal Power Consumption mode: 449 W ECO Power Consumption mode: 405 W PowerLite Pro G6[...]

Projector Safety and Approvals Specifications United States FCC Part 15 Class B (DoC) UL60950-1 2nd edition (cTUVus Mark) Canada ICES-003 Class B CSA C22.2 No. 60950-1 Parent topic: Technical Specifications Supported Video Display Formats For best results, your computer's monitor port or video card resolution should be set to display in the pr[...]

Display format Refresh rate (in Hz) Resolution (in pixels) SXGA+ 60/75 1400 × 1050 WSXGA+ 1 60 1680 × 1050 UXGA 60 1600 × 1200 WUXGA 2, 3 60 1920 × 1200 MAC13" 67 640 × 480 MAC16" 75 832 × 624 MAC19" 75 1024 × 768 59 1024 × 768 MAC21" 75 1152 × 870 Composite video TV (NTSC) 60 720 × 480 TV (PAL) 50/60 720 × 576 TV (SE[...]

Display format Refresh rate (in Hz) Resolution (in pixels) WXGA 60 1280 × 768 5 60 1280 × 800 60 1366 × 768 WXGA+ 60 1440 × 900 WXGA++ 60 1600 × 900 WSXGA+ 6 60 1680 × 1050 SXGA 60 1280 × 960 60 1280 × 1024 SXGA+ 60 1400 × 1050 UXGA 60 1600 × 1200 WUXGA 3, 7 60 1920 × 1200 SDTV (480i 8 /480p) 60 720 × 480 SDTV (576i 8 /576p) 50 720 × 5[...]

4 Input signals only from the Computer port (PowerLite Pro G6070W/G6170/G6270W/G6870) 5 DisplayPort input only 6 PowerLite Pro G6070W/G6270W/G6470WU/G6570WU/G6770WU/G6970WU only 7 Input signals only from the HDMI port (PowerLite Pro G6070W/G6170/G6270W/G6870) 8 HDMI input only Parent topic: Technical Specifications 241[...]

Notices Check these sections for important notices about your projector. Recycling Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Open Source Software License Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return y[...]

Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. • Do not place the projector on an unstable cart, stand, [...]

• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 20 inches (50 cm) of space between the projectors to allow for proper ventilat[...]

• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage to the case. • Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not bring your hands or face close to the vents while projec[...]

Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and r[...]

For Canadian Users This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Parent topic: Notices Trademarks EPSON ® , EasyMP ® , Instant Off ® , PowerLite ® , and Quick Corner ® are registered trademarks, and EPSON Exceed Your Vision is a registered logo[...]

These GPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. The list of GPL Programs is as follows and the names of author are described in the source code of the GPL Programs The list of GPL Programs busybox-1.13.4 iptab[...]

this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These rest[...]

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, prov[...]

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software inte[...]

For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable u[...]

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE [...]

Gnomovision version 69, Copyright (c) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type 'show w'. This is free software, and you are welcome to redistribute it under certain conditions; type 'show c' for details. The hypothetical commands 'show w' and 'show c' should show the[...]

The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright ©) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is p[...]

have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restric[...]

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" me[...]

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square [...]

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. Wh[...]

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above sp[...]

the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the c[...]

exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT [...]

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or [...]

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPL[...]

The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its quality and accuracy. This software is copyright (c) 1991-1998, Thomas[...]

that very many implementations will support it.) So far as we are aware, there are no patent restrictions on the remaining code. The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce[...]

Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all fa[...]

Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incident[...]

minzip 1.01e (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU) License terms of conditions of each program which are provided by owner of the copyright to the "zlib" are as follows. Copyright notice: (c) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty[...]

Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner[...]

the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work. 2[...]

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in [...]

The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives. Copyright [yyyy] [name of copyright owner] Licensed under the Apache[...]

code or documentation are not subject to the BSD License and may only be used or replicated with the express permission of Red Hat, Inc. (2) University of California, Berkeley Copyright (c) 1981-2000 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are[...]

The author of this software is David M. Gay. Copyright (c) 1998-2001 by Lucent Technologies All Rights Reserved Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that the copyright notice a[...]

Copyright (C) 1993 C.W. Sandmann This file may be freely distributed as long as the author's name remains. (6) Eric Backus (C) Copyright 1992 Eric Backus This software may be used freely so long as this copyright notice is left intact. There is no warrantee on this software. (7) Sun Microsystems Copyright (C) 1993 by Sun Microsystems, Inc. All[...]

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. T[...]

All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above[...]

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (15) Andrey A. Chernov Copyright (C) 1997 by Andrey A. Chernov, Moscow, Russia. All rights reserved. Redistribution and use in source and b[...]

DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT[...]

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (19) Todd C. Miller Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com> All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the [...]

Intel hereby grants you permission to copy, modify, and distribute this software and its documentation. Intel grants this permission provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation. In addition, Intel grants this permission provided that [...]

(27) Konstantin Chuguev (--enable-newlib-iconv) Copyright (c) 1999, 2000 Konstantin Chuguev. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of condit[...]

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (30) - Alex Tatmanjants (targets using libc/posix) Copyright[...]

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLAR[...]

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS[...]

Copyright (c) 2009 CodeSourcery, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in [...]

* * Neither the name of MIPS Technologies Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO[...]

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS [...]

LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM MIT License This projector product includes the open source software program which applies the terms and conditions provided by owner of the copyright to the "MIT License". The "MIT License&q[...]

jsp-1.4.3 License terms of conditions of each program which are provided by owner of the copyright to the "TOPPERS/JSP" are as follows. TOPPERS/JSP Kernel Toyohashi Open Platform for Embedded Real-Time Systems/ Just Standard Profile Kernel Copyright (C) 2000-2003 by Embedded and Real-Time Systems Laboratory Toyohashi Univ. of Technology, [...]

Note: The TOPPERS License has been revised several times; what is shown above is the latest version that is to be applied to software made public hereafter. TINET This projector product includes the open source software program "TINET" which applies the terms and conditions provided by owner of the copyright to the "TINET". The [...]

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (6) TINET and TOPPERS TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 by Dep. of Computer Science and Engineering Tomakomai National College of Technology, JAPAN TINET (TCP/IP Protocol Stack) Copyright (C) 2001-2006 [...]

Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with [...]