EverFocus Paragon264 2TB manual
- Consulta online o descarga el manual de instrucciones
- 134 páginas
- N/A
Ir a la página of
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones EverFocus Paragon264 2TB. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica EverFocus Paragon264 2TB o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual EverFocus Paragon264 2TB se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales EverFocus Paragon264 2TB, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones EverFocus Paragon264 2TB debe contener:
- información acerca de las especificaciones técnicas del dispositivo EverFocus Paragon264 2TB
- nombre de fabricante y año de fabricación del dispositivo EverFocus Paragon264 2TB
- condiciones de uso, configuración y mantenimiento del dispositivo EverFocus Paragon264 2TB
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de EverFocus Paragon264 2TB no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de EverFocus Paragon264 2TB y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico EverFocus en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de EverFocus Paragon264 2TB, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo EverFocus Paragon264 2TB, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual EverFocus Paragon264 2TB. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
I n s t r u c t i o n M a n u a l P P A A R R A A G G O O N N 2 2 6 6 4 4 x x 4 4 / / 2 2 6 6 4 4 x x 2 2 S S e e r r i i e e s s D D V V R R[...]
-
Página 2
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N P A R A G O N 2 6 4 x 4 / 2 6 4 x 2 S e r i e s D V R I n s t r u c t i o n M a n u a l 2 01 0 E ve rFo cus El ect roni cs C o rp www .e ve rfoc us. co m Al l rig ht s r ese rve d. No p art o f t he conte nt s o f t hi s manu al may b e rep rod uce d or tra ns mi tte d in any for m o[...]
-
Página 3
ii ii ii ii Safety Precautions • To avoid an y damage, please consider the following safe ty warnings: • Never place the re corder near to heaters, fu rnaces, other heat sources or under direct solar irradiation. • Operate the device only in locations providing the tolerable operating temperature range 0°C~40°C/32°F ~ +104°F. • Make sur[...]
-
Página 4
iii iii iii iii This Product is Ro HS compliant . WEEE The inform ation in this manua l was curren t upon publication. The manufactu rer reserves the right to re vise and improve h is products. Therefor e, all specifications are subject to cha nge without prior notice. Misp rints reserved. Please read this m anual careful ly before installing and u[...]
-
Página 5
iv iv iv iv TABLE OF CONT ENTS 1 PRODUCT OVERVIEW ............................................ ......................................................... 1 1.1 FEATURES ............ ........................................................... ................................................ 1 1.2 PACKAGE CONTENTS ........................ ............[...]
-
Página 6
v v v v 4.1 RECORD ................ ............................................................ ............................................. 27 4.2 LOGIN ............................. ............................................................ .................................... 27 4.3 SELECT CAMERA OPERAT ION ..................................[...]
-
Página 7
vi vi vi vi 5.8.2 Main M/T S EQ .......... .......... .......... .......... .......... ......... .......... .......... .......... .......... ......... .......... .......... ...... 79 5.8.3 Call M/T SEQ . ......... .......... .......... .......... .......... ......... .......... .......... .......... .......... ......... .......... .......... ......[...]
-
Página 8
1 1 P R O D U C T O V E R V I E W The latest E verFocus digital video recorder generation is based on H.264 compression technology, resulting in enhance d recording capacity and improved net work image transmission speed with high image quality. Compreh ensive features and extended e vent recording settings enab le the almost universal application [...]
-
Página 9
2 Ex p r es s Pl ay ba c k : S i m p ly p oi nt, cl ic k a n d dr ag t h e pl ay bac k ba r t o v i ew pr ev io us r e c or di n gs Ex p r es s Se ar ch : U se i nt ui tiv e pl a y ba c k ba r wi th a s i m pl e dr ag & dr op op er ati on Re m o te co nfi gu ra t i o n s u p po r t fr o m b uil t- in w e b i n te r fac e Gi ga b[...]
-
Página 10
3 M ou s e x 1 DV R x 1 Us er man ual x 1[...]
-
Página 11
4 1 . 3 S PE C I F I C A T I ON S Paragon264x4 Paragon264x2 Channel Numb er 16 8 16 Compression Format H.264 HDMI Video Output (1080p) Yes Recording Rate/Resolution 480 NTSC /400 PAL (D1) 240 NTSC / 200 PAL (Half D1) 240 NTSC /200 PAL (D1) 480 NTSC / 400 PAL (Half D1) 240 NTSC /200 PAL (D1) Playback Rate/Resolution 480 NTSC /400 PAL (D1) 240 NTSC /[...]
-
Página 12
5 RS-485 1 RS485 (3 Terminal connector) Power Source 100VAC~240VAC Dimensions (L x W x H) 410 x 430 x 88 mm / 16.2" x 16.9" x 3.5" Temperatu re 0°C~40°C / 32°F~104°F (20~80% humidity) Certificates CE, FCC, UL Support PTZ Prot ocol EverFocus, Pe lco D, Pelco P, Samsung, Transparent 1 . 4 F R O N T P A N E L Your primary interactio[...]
-
Página 13
6 16x 4x 9x 13x 10 x PiP The LED will show the selected screen layout. NOTE: The Multiview ke ys are only active in Main monitor - opera tion. 3) DVD+RW Burner: DVD+RW drive for video data export. (for D model only) 4) Channel keys 1~16 / 1~8 for full screen disp lay of selected channel. The LED will sho w the active channel. 5) DISP LAY: The DISPL[...]
-
Página 14
7 16) ENTER: En ter Key for menu operation and alarm acknowledge Turn camera au dio ON/OFF when viewing full screen camera. For more details, please refer to Chapter 3.2.1. 17) COPY: The CO PY key opens the menu for video data e xport, details in chapter 4.14 COPY. 18) JOG/SHUTTLE: Shuttle (outer wh eel): In playback mode, use the SHUTTLE fo r fast[...]
-
Página 15
8 1 . 5 R E A R P A N E L During initial setup you will be connecting your DV R to multiple input and out put de vices. This is d one through the rear panel. Figure 1- 2 Rear Panel ○ ○ ○ ○ 1 POWER: Powe r socket for external power supply, 100~240VAC power source ○ ○ ○ ○ 2 eSATA port: Used for external SATA HDD ba y ○ ○ ○ ○ 3[...]
-
Página 16
9 ○ ○ ○ ○ 9 HDMI: Conne ct to an HDMI-compatible unit. This HDMI-compa tible unit will be treated as another call monitor. Please use HDMI cables that have the HDMI logo . ○ ○ ○ ○ 10 VGA: Connect to the monitor that has VGA input. ○ ○ ○ ○ 11 MAIN monitor: Main monitor for live and playback display and on -screen display ○ [...]
-
Página 17
10 1 . 6 H D D I N S T A L L A T IO N Before installing the HDDs, ple ase check the location to install HDDs. The following picture shows the location of built-in HDDs. All other screw holes are re ser ved for ho t-swappable HDDs.[...]
-
Página 18
11 2 I N S T A L L A T I O N 2 . 1 V I D EO IN P U TS / O U T PU T S I N S T A LL A T I O N Cameras ha ve to be cabled with 75 Ohm video cable, e.g. RG-59, RG-12 and suitable BNC p lugs. Due to inappro priate absorbability, 50 Ohm coax cable (e.g. RG58), antenna cable and further types of coax cable a re not suitable. C h a p t e r 2[...]
-
Página 19
12 All connected vid eo sources must provide a 1 V pp NTSC/EIA or PAL/CCIR sta ndard video signal (depending on DV R version PAL / NTSC). When interconne cting transmission lines (twisted pair, f ibre optics, radio) to the video inputs, ma ke sure all receivers are accu rately calibrated. The Main monito r can be connected to BNC, Composite, or VGA[...]
-
Página 20
13 2 . 2 A U D I O IN S T A L L A T IO N The DVRs p rovide 16/8 audio inputs and 1 audio outpu t. The inputs are desig ned for max. 1 V pp @ 20 KOhm input. The installation h as to be effected with audio coax ca ble and RCA plugs. The output p rovides a max. 1 V pp @ 20 KOhm output line audio signal and may be connected to e.g. a monitor‘s audio [...]
-
Página 21
14 2 . 3 A LA R M / C O N T R O L C ON T A C T S I N S T A L LA T I O N The alarm input s can be used for recording start or recording rate adjustment. Furthermore, alarm reactions such as camera switching to monitors, buzzer, e -mail and network alarm are available. 4 a larm output relays can be switched if required. Additionally the DVR provides [...]
-
Página 22
15 CTRL IN GND CTRL IN GND Idle state Playback 2. Record: The input switches to Record (or Record Standby) as long the contact is closed. CTRL IN GND CTRL IN GND Idle state Record / Record Standby 3. Armed / Dis armed: If the contact is closed, the DVR will switch of f alarm (alarm contact and motion alarm) operat ion. System alarm events are alway[...]
-
Página 23
16 2. 4.1 Ge ne r al R S- 48 5 bu s ins ta ll at io n The EKB-500 ke yboard uses an RS-485 simp lex wiring; the signal is transferred via a sing le twisted pair line. CAT5 ne twork cable is recommended, UPT version (unsh ielded) is sufficient for normal applicat ion. A shielded cab le should be used if the installed cables a re expected to be highl[...]
-
Página 24
17 An RS-485 d istributor can also be used to increase the maximum nu mber of devices on the bus as well a s the total range. Each distributor output provides another RS-485 bus. This allows each output to extend an additional 1200m, and it also enables the additio nal connection of 31 further devices to each ou tput (the output itself rep resents [...]
-
Página 25
18 2. 4.5 Sp ee d D om e I nst all at io n Speed dome or te lemetry receiver pan/tilt/zoom co ntrol is available through web b rowser or the optional PowerCon software if the DVR is connected to a network. Loca l telemetry control is provided by USB - mouse control or by the optional EKB-500 keyboard. Supported pro tocols: EverFocus, Pelco-D, Pelco[...]
-
Página 26
19 2 . 7 N E T W OR K C ON NE C T I O N This section on ly describes physical conne ction to an Ethernet network. This step must be completed before the DVR’s c an connect to the network. There a re two basic types of connection: 2. 7.1 Di r ec t P C C on n e ct io n th ro u g h Cr os s o ve r N et wor k Ca b le The point-to-po int co nnection of[...]
-
Página 27
20 Figure 2- 2 Network Connection through Patch Cable Pinout of straight patchcable 2 . 8 F I N A L I N S T A L L P R O C E S S Once you have completed the basic wiring con nections, you are ready to t urn on the DVR. Simply plug in the power sou rce. The POWER L ED will light up if power is normal. Once the system has finished loadin g, you can be[...]
-
Página 28
21 3 M O U S E A N D F R O N T P A N E L O P E R A T I O N Paragon 264x4/264x2 se ries DVR suppo rts mu ltiple sources to control t he DVR. It can b e controlled with a mouse, the fron t panel, an EKB500, the handheld remote control, or serial command f rom RS232 port. This chapter will cov er the basic operation usin g mouse and front panel. 3 . 1[...]
-
Página 29
22 Figure 3- 2 OSD Menu ○ 1 In section 1, the re are ten setup options availab le. Move the mouse over an icon and click to select it. ○ 2 In section 2, the categories for the selected icon will be displayed. Click on a wo rd to select it. ○ 3 In section 3, a ll the details for the selected option will be av ailable. Click on a field to make [...]
-
Página 30
23 * Note about on-scr een keyboard: Click on a button to input that character. The buttons on the right and bottom have the following funct ions: Delete Dele te the letter Done Co nfirm the selection All Caps Switch to capital letters Space Enter a space ← Move to left → Move to right Cancel Cance l and exit from the keyboard[...]
-
Página 31
24 3 . 2 G E N E R A L FR O N T P A N E L OP E R A T I O N 3. 2.1 Ho w t o se l e ct a ch a nn el / E n ab l e au di o 1. In a view consisting of more t han one channel, tu rning Jog or Shuttle can scro ll through e ach channe l that is displayed. The selected channel will be high lighted by white frame. 2. While one channel is selected, click “E[...]
-
Página 32
25 Figure 3- 3 (OSD Menu) ○ 1 In section 1, the re are ten setup options availab le. Use Jog or Shuttle to highligh t an icon and press “ Enter ” to select it. ○ 2 In section 2, the main options for the selected icon will be displayed. Use Jog to highligh t an option and press “ Enter ” to se lect it. ○ 3 In section 3, a ll the detail[...]
-
Página 33
26 Bar : Press “ Enter ” key to activat e the slider, then use Jog to adjust the setting. Press “ Enter ” again to finalize the changes.[...]
-
Página 34
27 4 G E N E R A L D V R O P E R A T I O N S This ch apter introduces the operations o n major functions including playback, layout change, sequence, triplex operatio ns, copy, and search. 4 . 1 R E C OR D By default, the DV R will always be in record mode. When the DVR is turned on, it will start to record. The exceptions are: 1. DVR will no t rec[...]
-
Página 35
28 + To input passwo rd using front panel: press “ Enter ” key to show the on-screen keyboard (see Figure 4 -2 On-screen Keyboa rd). Use Jog or Shuttle to highligh t each character and press “ Enter ” key on f ront panel to input the selected characters. When finished, high light “ Done ” and press “ Enter ” key on front panel to co[...]
-
Página 36
29 By front pane l: Press key to enter P layback Setup Menu . A playback bar will sho w as the figure below: 2009/05/25 09 :09:30PM 2009/05/25 09 :09:40PM 2009/05/25 09 :10:30PM 1. Sto p key: press to stop playback 2. Slow Reverse key: press to slow reverse p layback 3. Pa use key: press to pause playback 4. Slow Forward key: press to slow forwa rd[...]
-
Página 37
30 4 . 6 P TZ 4. 6.1 Ge ne r al P T Z con t r ol Right-click to b ring up the menu bar and click on to enter PTZ Menu . The following actio ns can be performed using the PTZ Menu : 1. Use Direct ion Arrows (up, down, left, right) to move th e camera to the desired direction and angle . 2. In Zoom option , Click “ Z+” to zoom closer or “ Z-”[...]
-
Página 38
31 Click “ C ” to clear th e digit in cell Click “ X ” at top -right corner to close PTZ menu. Click “ Exit ” to leave PTZ function. 4. 6.2 E x pr e s s con t r ol P T Z When PTZ menu is c losed, the mouse curso r will chan ge to a d ifferent icon in different areas of the sc reen. User can contro l PTZ direction, zoom, and focus by cli[...]
-
Página 39
32 4 . 7 L A Y O U T The DVR has a to tal of seven display modes available . The different available layouts a re shown below: (Full screen) (PIP) (4 screen s) (9 screens) (10 screens) (13 scree ns) (16 screens) NOTE: PIP d isplay is not available in Playback mode To change layout, follow the steps below: By mouse: Righ t-click to bring up the menu[...]
-
Página 40
33 By front pane l: Press any channel key to bring that channel to full screen mode. 4 . 8 C HA NN E L S W I T C H I N G Use this function to change channel position 1. Se lect one camera 2. Press Channel button . 3. Click on the channel number you wish to switch on cha nnel bar. The display of channel will be switched. EX: S elect c amera1 and ent[...]
-
Página 41
34 4. Press again t o show both status information and camera information. 5. Press again t o hide all information. 4 . 1 0 S E Q U EN C E 1. By mouse: Click Sequence button to enter the auto sequential switching mode. 2. By front panel: Click Sequence button on front panel to enter the auto sequential switching mode. 4 . 1 1 M O NI T O R The DVR c[...]
-
Página 42
35 4 . 1 2 Z O O M 1. Make sure no cameras are in p layback mode 2. Se lect one camera 3. Right -click to bring up the menu bar and click button, or press ”Zoom” key on front panel. 4. When in ZOO M mode, the mouse cursor will change to a different icon in diffe rent areas of the screen. User can contro l PTZ direction, zoom, and focus by click[...]
-
Página 43
36 4 . 1 3 S E A R C H By mouse: Righ t-click to bring up the menu bar and click to enter Search Menu . By front pane l: Press ” Search ” key to enter Search Menu directly. 4. 13. 1 Ti me S ea r ch Figure 4- 5 Search Menu – T ime Search Play From : Select the time to be searched by choo sing the Date and Time. Click on the “Play” butt on [...]
-
Página 44
37 4. 13. 2 Ev en t Se a r ch Figure 4- 6 Search Menu – Even t Search From: Select starting date and time To: Select end ing date and time. Camera: Select which cameras to search for. Event: Sele ct which event type(s) to search for. Choose f rom Alarm, Motion, Video Loss, or Others. Click on the “Search” but ton to start search ing. The sear[...]
-
Página 45
38 Prev Page : Go to previous page. Next Page : Go to next page Unlock : Unlo ck the item if the item is locked Lock : Lock the item (After click Lock button, the selec ted item will show Locked or Partia l) Delete : De lete item if it is not locked Play : Playback selected item Copy : Copy select ed item In Lock s tatus, there will show “Partial[...]
-
Página 46
39 Figure 4- 7 Search Menu – Motion Search From: Select motion search starting date/time. To: Select mot ion search ending date/time. Camera: Select camera number to be searched. Figure 4- 8 Search Menu – Set Grid Grid Setting:[...]
-
Página 47
40 Choose which areas of the mo tion g rid will be included in the search . The areas you set in motion search must also be active in the motion settings of the Camera Setting Menu . Use the mouse to drag your desire d area. P ress “ Set All ” b utton to select the entire area. Press “ Clear All ” to d eselect the ent ire area. Press “ Sa[...]
-
Página 48
41 Archive To: Sele ct whether you want to copy to USB or DVD. Data S ize: Shows the estimated to tal size for the selected t ime period. (Paragon DVR is Linux base DVR, when you check the space of USB sticker by DVR or PC, the space may have a little bit different between PC and DVR) Archive Now : Press “ Archive ” button to start archiving. 4[...]
-
Página 49
42 5 D V R C O N F I G U R A T I O N This chap ter will wa lk you thro ugh the DVR Men u Settings step b y step and sho w yo u how to se t the DVR for your specific app lication. 5 . 1 C ON F I G U R A T I O N ME N U 1. To b ring up the Main Menu, press the “ Menu/Esc ” key on the front pa nel or right-click with the USB mouse to bring u p the [...]
-
Página 50
43 Date: Set the current date of DVR. Time: Set the cu rrent time of DVR. Resolution: Sele ct recording resolution based on vid eo format. NTSC: 704 x480 / 704x240 / 352x240 PAL: 704x576 / 704x288 / 352x288 Record Mode: Blank: No change for Record mode Normal+Event : Normal recording plus event recording . Event Only: Event recording only. Schedule[...]
-
Página 51
44 DHCP: DHCP server in LAN will automatically assign IP fo r network connection. PPPoE: IP Addres s: This field shows th e current IP Address for the DV R. A Fixed IP address must be se t manually. If DHCP or PPPo E is selected, this value will be assig ned automatically. Subnet Mask: This f ield shows the subnet mask fo r your network so the DVR [...]
-
Página 52
45 5 . 3 C A M E R A S E T T I NG Figure 5-2 is a screen sh ot of the CAMERA SETTING MENU . This menu is used to configu re individual camera set tings. Figure 5- 2 Camera Menu -Basic Setting 5. 3.1 Ba si c S ett in g Camera: Select the camera number. Title: The title setting allows you to assign a title t o selected camera. Each title supports up [...]
-
Página 53
46 Covert: Check t he box to hide the ca mera picture in live and se quence modes. However, th e image will still be recorded and can be played back by any use r who has playback rights. Record Mode: 2 record modes are available. Normal + Event: This recording mode includes continuous a nd event recording. Event Only: Video will be recorded only wh[...]
-
Página 54
47 5. 3.2 Vi de o A dj u st Figure 5- 3 Camera Men u – Video Adjust Camera: Select the camera you wish to adjust. “Title” will cha nge to the name of the sele cted camera. Brightness: Ad justs how bright/dark the p icture appears. If d etails appear to be lo st in the shadows or darker regions, t ry increasing t he Brightness. If the image ap[...]
-
Página 55
48 5. 3.3 Mo t i on Figure 5- 4 Camera Men u – Motion Camera: Select the camera you wish to adjust. “Title” will cha nge to the title name of the sele cted camera. Enable: Check b ox to enable mot ion detection. Other motion options will not be a vailable unless this feature is sele cted. Log: Check bo x to record motion events in the log. Ma[...]
-
Página 56
49 Auto Lock: Check the box an d the events will be recorded in the write protec ted segment of the Hard Disk. (DVR will lock a pe riod of time when alarm happen, the length of time will depend on DV R setting) Alarm Output: This will transmit a signal through o ne of t he alarm outputs. It can be set to e ither “ NONE ” (not active), “ 1 ”[...]
-
Página 57
50 Figure 5- 5 Camera Menu – Motion Grid Settin g Apply To: This bu tton can be u sed to copy the motion set tings t o other came ras. Se lect which c ameras you wish to copy to. "Select All" selects all cameras, “Unselect All” de selects all cameras. Click “OK” to copy the settin gs or "Cancel" to exit without copying[...]
-
Página 58
51 5. 3.4 Vi de o L os s Figure 5- 6 Camera Menu – Video Loss Camera: Select the camera you wish to adjust, “Title” will cha nge to the title name of the sele cted camera. Enable: Check box to enable Video Loss. Log: Check bo x to record video loss events in the log. Pre-alarm Record: Ch eck bo x to record several moments before the vid eo lo[...]
-
Página 59
52 Apply To: This b utton can b e used to copy the video loss settings to other cameras. Se lect which cameras you wish to copy to. "Select All" selects all cameras, “Unselect All” de selects all cameras. Click “OK” to copy the settin gs or "Cancel" to exit without copying. 5 . 4 R E C OR D & P L A Y S E T T I N G Fi[...]
-
Página 60
53 For Schedule recording, t he o nly wa y to stop schedule recording is to turn schedule recordin g off. Pressing any keypad on front panel to ch ange sched ule recordin g will no t work during scheduling record mode. When schedu le recording is disabled, DVR will auto turn on recording Time Stam p: Select if the time and date will display while r[...]
-
Página 61
54 5. 4.3 Pl a y Figure 5- 9 Record & Play Menu - Play Quick Playback: Ch eck the box to enable quick playback funct ion. Playback From X Seconds ago: When the DVR is put into playback, it will begin playing from the se lec ted time. Choo se from 60 to 3600 seconds.[...]
-
Página 62
55 5 . 5 A LA R M & EV E N T S E T TI N G Figure 5-10 is a screen shot of th e ALARM & EV ENT SETTING MENU . Th is menu will walk you through alarm and event setup. Figure 5- 10 Alarm & Event Menu - Alarm 5. 5.1 Al ar m Alarm: Sele ct the alarm number from 1 to 16. Enable: Check box to enable alarm. Log: Check bo x to record alarm event[...]
-
Página 63
56 Recording: Se lect which cameras will start record ing when alarm happens. Email Notify: Check box to enable email notification when an alarm occurs. Input Type: This fie ld is to change the type of alarm trigg er. N.O.: Normal Open contact. N.C.: Normal Close contact. Network Alarm: Che ck box to send out a n etwork alarm to client PC when moti[...]
-
Página 64
57 5. 5.2 Ev en t This section cov ers internal system event warn ings. Figure 5- 11 Alarm & Event Menu – Event Event: Sele ct from the following event types. Fan Failure: The internal fans are equipped with rotation detection. Any fault of a fan will cause "Fan Failure" event. HD Temperatu re: Hard drive is over the safety warning [...]
-
Página 65
58 Fan Failure : Figure 5- 12 Alarm & Event Menu – Event-Fan Failure Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when a fan fails t o w ork. Email Notify: Check box to enable email notification when a fan fails to work. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rCon [...]
-
Página 66
59 HD Temperature : Figure 5- 13 Alarm & Event Menu – Event - HD Te mperature Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when hard drive’s temp erature is over the “Temp. Warning Limit” . Email Notify: Check box to enable email notification when temperature is over the “Temp. Warnin g Limit”. Net[...]
-
Página 67
60 HD Failure: Figure 5- 14 Alarm & Event Menu – Event - HD Fa ilure Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when no hard d rive is detected. Email Notify: Check box to enable email notification function when HD fails. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rC[...]
-
Página 68
61 HD Full: Figure 5- 15 Alarm & Event Men u – Event - HD F ull Buzzer: Check box to enable buzzer when hard drive is full. Email Notify: Check box to enable email notification when HD is full. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rCon software and setting up Alarm S erver in Network Setup menu) A[...]
-
Página 69
62 HD Off: Figure 5- 16 Alarm & Event Menu – Event - HD Off Buzzer: Check box to enable buzzer when hard drive is off. Email Notify: Check box to enable email notification when HD is off. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rCon software and setting up Alarm S erver in Network Setup menu) Alarm O[...]
-
Página 70
63 Power Loss: Figure 5- 17 Alarm & Event Menu – Event – Po wer Loss Log: LOG is pe rmanently checked for this featu re. Power Loss events are always recorded by the DVR. Email Notify: Check box to enable email notification when HD is off. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rCon software and s[...]
-
Página 71
64 Record Stop: Figure 5- 18 Alarm & Event Menu – Event – Recor d Stop Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when DVR stops recording. Email Notify: Check box to enable email notification when DVR stops recording. Network Alarm: Check box to send out a network a larm to client PC. (requires Powe rCo[...]
-
Página 72
65 Network Loss : Figure 5- 19 Alarm & Event Menu – Event – Networ k Loss Log: Check bo x to record events in the log. Buzzer: Check box to enable buzzer when network is lost. Alarm Output: This will transmit a signal through o ne of t he alarm outputs. It can be set to e ither “ NONE ” (not active), “ 1 ”, “ 2 ”, “ 3 ”, or [...]
-
Página 73
66 5 . 6 S C H E D U LE S ET T IN G Figure 5- 20 is a screen shot o f the SCHEDULE SETTING MENU . In t his menu you ca n set a unique timer to start re cording du ring a specified time p eriod. This menu is used to conf igure Express Setup, Ho lidays and Schedule settings. Figure 5- 20 Schedule Menu- Express Setup 5. 6.1 Ex pr ess S et up Weekend S[...]
-
Página 74
67 Event Action: Check this b ox to enable Buzzer, Alarm out, E-mail and Network actions when an event occurs on the se lected time period. Apply: Pre ss App ly button bring up a confirmation window. Select “Yes” t o conf irm and apply exp ress schedule se ttings or “No” to cancel changes. 5. 6.2 Ho l id a y s In addition to se tting a week[...]
-
Página 75
68 Month/weekday: Repeats recording on a specific day of the month/week. Details: Specif ies the date to be recorded. Prev: Previous Page (30 Holidays Total) Next: Next Page (30 Holidays Total) 5. 6.3 Sc he d u le Figure 5- 22 Schedule Menu- Schedule Camera: Select a n umber to change the schedule for that camera . Each camera can be set on a 24 ho[...]
-
Página 76
69 2. Cha nge t he section to different mode (with different color) by clicking on the first block of each section . The color s watches from gray -> orange -> blue, every time user clicks the first block of a section. Schedule Se tting from front panel 1. Enter s chedule se tting mode : press Enter button to en ter schedule setting mode. At [...]
-
Página 77
70 6. Editing blocks in a time bar : when a time bar is selected (highlighted in red fra me), press Enter button, then the first block of this bar will be se lected (highlighted in blue frame). Turning Jog knob to switch to d esired b lock as starting time, an d press Ente r button again to conf ir m. At this time, the current a nd all following bl[...]
-
Página 78
71 Press “ Edit Timezone ” but ton to edit the time zone . Figure 5- 23 Schedule Menu- Schedule-Edit Tim ezone Editing Timezone : From: Displays sche dule start time To: Displays schedule end time Record: Displays Re cord mode Resolution: Sele ct recording resolution. NTSC: 704x480; 704x240; 352x240 PAL: 704x576, 70 4x288, 352x288 Normal: Frame[...]
-
Página 79
72 Apply to Cam eras: This button can b e used to copy sche dules to other cameras. Select wh ich cameras you wish to copy to. "Select All" se lects all cameras, “Clear All” dese lects all cameras. Click “OK” to copy the settings or "Ca ncel" to exit without copying.[...]
-
Página 80
73 5 . 7 N E T W OR K S E TT I N G Figure 5-24 is a screen shot o f the NETWORK SE TTING MENU . This men u is for configuring the DVR for a network connectio n. NOTE: Since every Network Configu ration is different, please check with your Network Administrat or or ISP to see if your DVR requires specific IP addresses and/or port numbers. Figure 5- [...]
-
Página 81
74 HTTP Port: Port numb er for HTTP/WEB commun ication. Bandwidth Limit: Allows user to limit the bandwidth u sed by the DVR. 5. 7.2 EM A IL Figure 5- 25 Network Menu – Email SMTP Server : Assign the SMTP (e-mail) server’s name. NOTE: For more re liable email service, use the server’s IP add ress. SMTP Port: Assign the port number used by the[...]
-
Página 82
75 5. 7.3 DD NS DDNS Server: Select either “EverfocusDDNS” or “www.d yndns.org” as the DDNS provider. If DDNS will not be used , simply select “Disable”. Everfocus DDNS Figure 5- 26 EverfocusDDNS DVR Name: Inpu t the desired name for the DVR Register/Upda te: Click the button to submit and reg iste r the name to the Everfocus server.[...]
-
Página 83
76 www.dyndns .org Figure 5- 27 www.dyndns.org Host name: Host name created through the dyndn s account. User name: User n ame of the dyndns account. Password: Pa ssword of the dyndns account. Confirm : Re-ent er password. Note: For more de tails on DDNS setup, please see “Chapter 8 - Everfocus DDNS Set up”.[...]
-
Página 84
77 5. 7.4 Al ar m Se r v er Figure 5- 28 Network Menu – Alarm Server Server IP1~3 : IP address of client PC with installed PowerCon S oftware. The network alarm can be transmitted to up to 3 addresses. Protocol: Sele ct the protocol type for alarm transmission: UDP: User Datagra m Protocol TCP: Transmission Control Protocol Port: Select the trans[...]
-
Página 85
78 5 . 8 D I S P L A Y S E T T IN G Figure 5-29 is a screen shot of the DISPLAY SETTING ME NU . This menu will walk you through Monitor On-Screen Display (OSD) and Sequential setup. Figure 5- 29 Display Menu – M onitor OSD 5. 8.1 Mo ni tor O S D These are the display options for the Main Monitor. Main Monitor Camera Ti tle: Check the box to displ[...]
-
Página 86
79 5. 8.2 Ma i n M/T S E Q Figure 5- 30 Display Menu – M ain M/T SEQ Step: Sequen ce order. Cannot be changed. Camera: Select which camera appears on the curren t step. Dwell (sec): Se t the dwell time for each step. Sequence d well time can be set from 0 to 99 second s. 5. 8.3 Ca ll M /T S E Q Figure 5- 31 Display Menu – Ca ll M/T SEQ Step: Se[...]
-
Página 87
80 5 . 9 D I S K S E T TI N G Figure 5-32 is a s creen shot of the DISK SETTING MENU . This menu is used to revie w and manage the DVR’s hard d rive settings. Figure 5- 32 Disk Menu 5. 9.1 Di s k Disk: Select the disk n umber. Health Status: Disp lays current status of the selected disk. Disk Tem perature: Displays current disk temperatu re. Disk[...]
-
Página 88
81 5. 9.2 Loc k/ F or m at Figure 5- 33 Lock/Form at Menu Maximum Lock (%): User ca n set the ma ximum lock percentage of th e HDD volume. After settin g lock percentage, it can be enabled/disabled in three places 1. “Camera > B asic Setting > Motion > Auto Lock” 2. “Alarm & Eve nt > Alarm > Auto Lock”. 3. Lo ck or unlock[...]
-
Página 89
82 Note : the followin g rules apply to Hot Swappable model on ly 1. If use r takes out the HDD and put it back (with the same HDD) to the same DVR. It will be fin e. 2 . If user takes out the HDD-A o f Paragon-A, then put it into another P aragon-B which already has a HDD-B. The data of HDD-A will be cleaned in Paragon-B. If user hopes to keep the[...]
-
Página 90
83 5 . 1 0 SY S T E M S E T T I N G Figure 5-34 is a screen shot of the SYSTEM SETTING MENU . Th is menu is for sett ing up the syste m configuration s of the DVR. Figure 5- 34 System Menu – Date/Time 5. 10. 1 Dat e /T im e Date: Set current Date. Time: Set curren t Time. Date Format: Cho ose date format from yyyy/mm/dd, dd/mm/yyyy, an d mm/dd/yy[...]
-
Página 91
84 5. 10. 2 Day l i gh t S av i n g Figure 5- 35 System Menu – Daylight Saving Daylight Saving: Ch eck the box to enable daylight sa ving time. Start Date: Set the start date of daylight saving time. Start Time (hh:mm): S et the time when daylight saving time begins. Set To (hh:mm): This is wh at the time will change to when daylight saving begin[...]
-
Página 92
85 5. 10. 3 Us er User Menu is where you can add or delete different users on the system as well as set administrato r rights. Figure 5- 36 System Menu – Use r Add Click “Add” bu tton to add a n ew user. Set the na me (case-sensitive), password, a nd access level. P ress “Add” button to co nfirm a new user or “Cancel” to exit without [...]
-
Página 93
86 Edit Click “Edit” b utton to make changes to an existing user accou nt. Press “Save” button to sa ve changes or “Cancel” to exit with out making changes. Figure 5- 38 System Menu – Use r - Edit User Login: Ch eck this box to activate user log in. When this is d isabled, no username or pa ssword is required to acces s the system, an[...]
-
Página 94
87 5. 10. 4 I/O Co n t r ol Figure 5-39 is a screen shot of the I/O Control Setting Menu. This menu is used to define the se ttings for controlling the DVR through RS232 or RS485. Figure 5- 39 System Menu – I /O Control RS232 Baud Rate : Th e speed u sed to transmit instru ction or in formation t hrough the RS232 po rt on the DV R. Choose from th[...]
-
Página 95
88 5. 10. 5 Mi sc . Figure 5- 40 System Menu – F irmware & Misc. Firmware Current Firmwa re Version: Displays the current version. Firmware Upgrade : Press “Upgrade” to upgrade the firmware. NOTE: To perform a Firmware Upgrade, you will need to connect a USB flash device with the latest version o f the firmware. Do not disconne ct USB dev[...]
-
Página 96
89 5 . 1 1 I N F O R M A T I ON SE T TI N G Figure 5- 41 is a screen shot of the INFORMATION SETTING MENU . This menu displays important system information . Figure 5- 41 Information Menu – System 5. 11. 1 Sy st em System Version: Displa ys firmware version number. Model: Displays DVR mo del number. NTSC/PAL: Displays cu rrent video format. Netwo[...]
-
Página 97
90 5. 11. 2 Log Figure 5- 42 Information Menu – Log Log Type: Event: to see log sorted by event. User: to see log so rted by user. Operation: to s ee log sorted by operation. View Log: P ress “View Log” butto n to view the log. See Figure 5- 43 for more detail. Clear Log: Pre ss “Clear Log” button to clear the log. Export Log to USB: Exp [...]
-
Página 98
91 Figure 5- 43 Log List Prev Page : Go to the previous page of log. Next Page : Go to the next page of log. Clos e: Close the win dow[...]
-
Página 99
92 6 N e t w o r k i n g O v e rv i e w This ch apter will give you a basic in struction on ho w to se t up the DV R for network co nnection. It is highly recommended t hat yo u have a wo rking knowledge of what a netwo rk is a nd h ow it works. This will be helpful in co mpleting the networking process. 6 . 1 I n t r o d uc t i o n t o T C P / I P[...]
-
Página 100
93 6 . 4 V i r t u a l P o r t s A port number represents a "channel" or en tryway for n etwork co mmunications. Port n umbers allow different applications on the same co mputer t o utilize network resources without interfering with each ot her. Port numbers most com monly appear in network prog ramming, particularly so cket programming. [...]
-
Página 101
94 Do you have a static IP address? _____ _________ A Static IP ad dress means you use the same IP addre ss e very time you connect to the Internet. With a static IP address, other Internet users always know the a ddress of your location and can easily connect with it. This makes it much simp ler to host a website , email server, or other type of s[...]
-
Página 102
95 6 . 7 S i m p l e O n e t o O n e C on n e ct i o n Crossover Ethe rnet Cable Pin outs: The Figure be low shows the pin configurations fo r a cross-over cable. Connection Proc edure: Th e First step is to purchase or make a cross-over cable. We recommend purcha sing o ne if you have neve r made a cross-over cable. Please remember you can not[...]
-
Página 103
96 A ssign an I P of 192.168.001.003, a Subnet Mask of 2 55.255.255.000, and a Gateway of 192.168.001.001 . You can ignore DNS Server. Th e next step is to set the computer’s network set tings to match those of the DVR. You will need Administrato r privileges on your Windows machine to do this. To assign a fixed IP address in Wind ows[...]
-
Página 104
97[...]
-
Página 105
98[...]
-
Página 106
99 Click o n the option that sa ys “ Use the following IP address” A ssign an IP address of 192.168.1.2, a Subnet Mask of 255.255.255 .0, and a Default Gateway o f 192.168.1.1, the n click OK. Re start both the computer and the DVR. To access the DVR from the computer, simply open Interne t Explorer and in the address ba r type:[...]
-
Página 107
100 6 . 8 D i re c t H i g h S pe ed Mo d e m C o n n ec t i o n Straight Through Ethe rnet Cable Pin outs: The Figure be low shows the pin configurations fo r a straight cable. Connection Proc edure: Th e first step is to purchase or make a straight through cable. We recommend purch asing one if you have ne ver made a straight through cable. P[...]
-
Página 108
101 O nce yo u have a stra ight through cable p lug one end into the LAN port on the b ack of the recorder and the other in to the high speed modem. L og into the EverFocus DVR menu and go to the Network Setting Menu. I nput the Static IP address, t he Subnet Mask, and the Gateway that you obtained from t he internet service provide r. [...]
-
Página 109
102 6 . 9 R o u t e r o r L A N C on n e c t i o n Straight Through Ethe rnet Cable Pin outs: The Figure be low shows the pin configurations fo r a straight cable. Connection Proc edure: Th e First step is to purcha se or make a straight through ca ble. We recommend purchasing o ne if you have ne ver made a straight through cable. Please rememb[...]
-
Página 110
103 O nce yo u have a stra ight through cable p lug one end into the LAN port on the b ack of the recorder and the other in to the router. L og into the EverFocus DVR menu and go to the Network Setting Menu. To let the router automatically assign an address: Set the Network Typ e to DHCP. Make sure to write do wn the IP address and [...]
-
Página 111
104 number o f the IP address. For example, if th e IP address of the computer is 192 .168.2.101, the DVR’s IP address should be 192.168.002.050. To access the DVR from a computer simply open Internet E xplorer and in the address bar type: http:// (IP address of the DVR) Note: The DVR’s IP address will only work at the location of t he [...]
-
Página 112
105 7 R E M O T E O P E R A T I O N F R O M B R O W S E R 7 . 1 C ON N E C T I N G T O D V R To access the DVR from a computer, open an Internet Explorer window and in the address bar type: Local connectio n: http:// (IP address from the DVR’s Ne twork Menu) Internet connectio n: http:// (IP address given by you r Internet Service Provider) T[...]
-
Página 113
106 7 . 2 B R O W S E R S E C U R I T Y S E T T IN G 7. 2.1 In st al li ng Act i v eX con t r ol s When you first c onnect to the DVR’s IP addre ss, you should see a screen like the one below. If you do not see a yellow bar like the one the arrow is pointing at, your se curity settings may be too high. If so, go to “Section 7.2.2 - Enabling Act[...]
-
Página 114
107 Install the ePlus DVR.cab file when prompted to do so. Once the file fin ishes installing, you will return to the same login page as before. Type in the use rname and password and click Login to view the cameras. Default username: admin Default passwo rd: 11111111[...]
-
Página 115
108 7. 2.2 En ab l i ng A c ti veX C o nt rol s Note: This section is only necessary if you DO NOT see the yellow ActiveX bar at the top of your browse r screen when you first connect to the DVR. At the top of the Internet Explorer Window, click on Tools, then select Internet Options. Click the Se curity tab at the top of the window, then ch oose C[...]
-
Página 116
109 In the Security Set tings window, scroll to “ActiveX con trols and plug-ins” Set the cont rols as follows: “ Enable ”: Allow previou sly unused ActiveX controls to run withou t prompt ( Internet Explorer 7 only ) Allow scriptlets ( IE 7 only ) Automatic promp ting for ActiveX controls Binary and script behaviors Disp[...]
-
Página 117
110 Close the window so you are back at the login screen. Click the Refre sh button to reload the page. Install the ePlus DVR.cab file when prompted to do so. Once the file fin ishes installing, you will return to the same login page as before. Type in the use r name and password and click Lo gin to view the cameras. Default user name : admin Defau[...]
-
Página 118
111 7 . 3 R E M O T E L I V E V IE W 1. In the main page, you will see live images in a 16-screen display (or 8 screens, depending on the model). 2. The status of each camera is represente d by different colors on the left side of the screen. Green means normal; o range indicates a Motion; blue indica tes Vloss, red indicates an alarm even t. Click[...]
-
Página 119
112 7 . 4 R E M O T E P T Z C O N T R OL 1. Use Direction A rrows (up, down, left, right) to mo ve the camera to the desired direction and a ngle. 2. In Zoom option , Click “ Z+” to zoom closer or “ Z-” to zoom fa rther away. 3. In Focus op tion, click “ F+ ” to increa se the focus or click “ F- ” to d ecrease the focus. 4. In Iris [...]
-
Página 120
113 a. Click “ Tour ” button b. Click the number of the desired t our c. Click “ Go ” button 12. Steps to remove a tour a. Click “ Tour ” button b. Click the number of the desired t our c. Click “ Delete ” button[...]
-
Página 121
114 7 . 5 R E M O T E P LA YB A C K To playba ck the video, p ress “Search” bu tton. Select from “Time Se arch”, “Event Search”, o r “Motion Search”. For more details about Search setting, please refer t o “4.13 Search Setting”. “Event Search ” and “M otion S earch” will show maximum 40 0 search result items(near sta rt [...]
-
Página 122
115 8 E V E R F O C U S D D N S S E T U P Setup Steps: Step 1. S et up the Network Menu according to the in structions detailed in th e Networking chap ter. (Make sure that DNS Server 1 is set correctly or DDNS will not work) Step 2. Go t o the website http://everfocusddns .com and check for an available name. Note: This step is optional, as it is [...]
-
Página 123
116 9 L I N K S Y S & D - L I N K P O R T F O R W A R D I N G 9 . 1 L I N K S Y S P O R T FO R WA R D I N G This section will co ver a few simple configurations for the Linksys router. Th is chapt er is only to offer some help to the installer and end user. Please unde rstand we DO NOT support this product a nd will not give tech support on it.[...]
-
Página 124
117 Applications an d Gaming allows you to se t up public services on your netwo rk, su ch as web se rvers, ftp servers, e-mail servers, o r other spec ialized Internet applica tions. (Some Interne t applications ma y not require any fo rwarding) To forward a port, e nter the info rmation on each line fo r the criteria required. Descriptions of eac[...]
-
Página 125
118 9 . 2 D - L I N K P O R T F OR W AR D IN G This section will cover a few simple config urations f or the D-Link router. This chapter is only t o offer some help to the installer and end user. Please unde rstand we DO NOT support this product a nd will not give tech support on it. If you need additional techn ical support on this router you must[...]
-
Página 126
119 Click Virtual Se rvers on the left to bring up the fo llowing screen. Virtual Se rvers allows users who are connecting re motely to access services on the route r’s Local Network. The functions o f each field are described below. Virtual Server - S elect Enabled or Disabled Name - Enter the name referencing the virtual service Private IP - Th[...]
-
Página 127
120 Here is an exa mple of the information for each service: Name Private IP Protocol Private Port Public Port Schedule HTTP 192 .168.1.50 Both 80 80 Enable CTRL 192 .168.1.50 Both 1600 1600 Enable Note: If you changed port 80 in the DVR’s Network Menu, op en that port instead of 80.[...]
-
Página 128
121 1 0 T R O U B L E S H O O T I N G If you h ave problems with the system, run through the followin g checklist to see if you can solve the problem. The DVR w ill not go into record mode. Bring up the DVR’s Menu and check under the Camera Menu. Verify that all connected cameras are checked as “Installed” and that Record Mode is set [...]
-
Página 129
122 A P P E N D I X A : T I M I N G O F A L A R M M O D E S Transparent Mo de Input Event Alarm Duration t t Event = t Reaction t Event : Duration of a larm input source (motion, contact, system events...) t reaction : Re sulting duration for th is alarm mode, related to event record, alarm outputs, OSD message, buzzer Timeout + Transp arent Mode t[...]
-
Página 130
123 Timeout Mode t Input Event Alarm Duration t Duration = t Reaction t Event t Event : Duration of a larm input source (motion, contact, system events...) t Duration : Alarm duration f or timeout, defined in the event setup menu s t reaction : Re sulting duration for th is alarm mode, related to event record, alarm outputs, OSD message, buzzer Per[...]
-
Página 131
124 Timeout Mode: Retrigger of Alarms t Event : Duration of a larm input source (motion, contact, system events...) t Duration : Alarm duration f or timeout, defined in the event setup menu s t reaction : Resu lting duration for this alarm mod e, related to event record, a larm outputs, OSD message, buzzer Timeout+Tran sparent Mode: Retrigger of Al[...]
-
Página 132
125 A P P E N D I X B : C H A N G I N G R U L E F O R E X P R E S S S E T U P Case 1: Record Mode: Normal + Event Record With: Recording days DVR wil l Auto adjus t Quality and E vent frame ra te to match the Recording days which user selected: According to resolution, event hours and assumption above, DVR will select one set of suitable quality a [...]
-
Página 133
126 Case 3: Record Mode: Normal + Event or Event Only Record With: Preset Setting DVR will apply se tting in below table to all camera s according to different Preset Setting. Preset Sett ing Option Camera Item Apply value Quality Superior Normal Fram e Rate Max recordi ng frame rate of DVR Best Quali ty Event Fra me Rate 30 Quality Standard Normal[...]
-
Página 134
127 Headquarte r Office 12F, No.79 Sec.1 Shin- Tai W u Road, Hsi-Chi, Tai pei, Taiwan Tel: +886-2- 26982334 Fax: +886-2-2 6982380 Beijing office Room 609,T echnolog y Trade Build ing. Shangdi Inf ormation Indus try Base, Haidian Distr ict,Beijing Ch ina Tel: +86-10- 62971096 Fax: +86-10-6 2971423 European O ffice Albert-Einste in-Strass e 1, D-4644[...]