Extron electronic DVS 605 manual

User Guide DVS 605 HDCP-Compliant Scaler (with Seamless Switching) 68-2110-01 Rev . B 05 13 SCALERS AND SIGNAL PROCESSORS DVS 605 DVS 605 AD[...]

Safety Instructions • English W ARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated danger ous voltage within the product’ s enclosur e that may present a risk of electric shock. A TTENTION: This symbol, , when used on the pr oduct, is intended to alert the user of important operating an[...]

FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rules. The ClassA limits provide r easonable protection against harmful interference when the equipment is operated in a commer cial environment. This equipment generates, uses, and can radiate radi[...]

Conventions Used in this Guide Notifications The following notifications are used in this guide: DANGER: A danger indicates a situation that will result in death or sever e injury . W ARNING: A warning indicates a situation that has the potential to result in death or severe injury . CAUTION: A caution indicates a situation that may result in minor[...]

Contents Introduction ............................................................ 1 DVS 605 Series Description ................................ 1 Licensed Third‑party Softwar e Used in the DVS 605 ................................................................... 2 Key Features ...................................................... 3 Video Inpu[...]

Mounting ............................................................... 90 Mounting the DVS 605 ..................................... 90 T abletop Placement ...................................... 90 UL Guidelines for Rack Mounted Devices .... 90 Rack Mounting ............................................. 91 Furniture Mounting......................[...]

Intr oduction This manual contains information about the Extron DVS 605 scalers with instructions for experienced installers on how to install, configure, and operate the equipment. In this manual the terms “DVS,” “digital video scaler ,” and “scaler” ar e used interchangeably and r efer to any DVS 605 model. DVS 605 Series Description [...]

Licensed Thir d-party Software Used in the DVS 605 The DVS 605 uses various licensed third‑party softwar e during operation. T o view details about third‑party packages and associated licensing, click the License Information button on the Unit Information page of the Default web pages ( see the Unit Information Page on page 82). The DVS605 L[...]

Key Featur es Video Inputs • Three HDMI and two universal analog video inputs — The two universal 15‑pin HD inputs automatically detect incoming RGB, HD component video, YUVi, S‑video, or composite video signals. The DVS 605 allows for seamless switching between HDMI and analog video sources. • Auto input format detection — For th[...]

Audio • Audio switching — The DVS 605 A and DVS 605 AD feature audio switching for five analog stereo balanced or unbalanced inputs. • Output volume control — DVS 605 audio models pr ovide master volume control. Fixed and variable line level outputs are available, and each output can be balanced or unbalanced. Stereo input signals can[...]

• AFL - Accu-RA TE Frame Lock — A patented technology exclusive to Extr on that eliminates image tearing caused by frame rate conversion. • Image freeze contr ol — A live image can be frozen using contr ol via USB, RS‑232 serial, Ethernet, or IR control. • Auto-Image setup — When activated, the unit automatically detects the [...]

• RS-232 control port — Using serial commands, the DVS 605 can be contr olled and configured via the embedded web pages, or integrated into a contr ol system. Extron products use the SIS ‑ Simple Instruction Set command pr otocol, a set of basic ASCII code commands that allow for quick and easy programming. • Front panel USB configura[...]

Rear Panel Connections This section describes how to connect cables to a DVS 605 scaler . Rear Panel Cabling The illustration below shows all the possible rear panel featur es of the audio (DVS 605 A and DVS 605 AD) and the non‑audio (DVS 605 and DVS 605 D) models. RGB/R-Y, Y, B-Y 1 5 2 3 4 UNIVERSAL AUX HDMI HDMI GENLOCK 3G/HD - SDI RS-232 IR Tx[...]

a Power input — Connect the standard IEC power cor d from a 100 to 240 V AC, 50‑60 Hz power source into this connector . The front panel control and input selection buttons light in sequence during power ‑up. b Inputs 1 and 2 — Connect suitable inputs to these two universal analog input ports (15‑pin HD [VGA] connectors) for auto‑detect[...]

5. While holding the connector securely against the lacing bracket, tighten the tie wrap, then remove any excess length. The LockIt bracket can also be used in a stacked formation, as shown below . Side Mounted Stacked Figure 2. LockIt Bracket Mounting Options d Audio inputs 1-5 (audio models only) — Connect audio sources to these 5‑pole captiv[...]

i Audio output (fixed, audio models only) — Connect audio output devices to this 5‑pole, captive screw connector for line level, balanced or unbalanced, analog ster eo. Wire the connectors as shown below . Balanced Audio Output Tip Ring Tip Ring Slee ve s Unbalanced Audio Output Tip No Ground Here No Ground Here Tip Slee ve s LR LR Do not tin t[...]

n RS-232/IR port — For serial RS‑232 control, connect a host computer or contr ol system to the 5‑pole captive screw connector . This port is also a hard wired IR contr ol for use with an external IR controller . The default RS‑232 protocol is 9600 baud, 1 stop bit, no parity , 8 data bits, no flow control. By default the IR port is disable[...]

Operation This section of the manual discusses the operation of a DVS 605 device. T opics covered include: • Front Panel Overview • Powering Up • The DVS 605 Menu System — Configuration and Adjustments • Front Panel Lockout (Executive Modes) • Window vs. Image Size Position — An Overview • Picture-in-Pictur e (PIP)[...]

Powering Up When applying power to the DVS 605, the unit undergoes a start‑up self testing sequence (see image below) and then the LCD displays the default display cycle. Default Display Cycle When in use but not in any menu mode, the LCD screen defaults to cycling thr ough the input/output configuration currently installed. The displayed content[...]

Menu Overview After start‑up, and when no adjustments are actively being made, the “default cycle” appears on the LCD. The screens cycle between the scr een that shows the number and video format of the active input and the current output r esolution. Pressing the Menu button once brings up the first of eight main (top level) menus, as shown [...]

Next INx FORMAT DIGITA L Rotate either to select input audio format. * NOTE: To activate the hidden menu “Edit Comms”, press and hold input 5 and Next buttons simultaneously for three seconds. To exit the Edit Comms menu press Menu. Menu ADVANCED CONFIG AUTO IMAGE Input #x OF F Rotate to turn Auto Image mode on or off. Next Menu SERIAL PORT 960[...]

T o return to the default cycle from within any menu, press the Menu button r epeatedly until the Exit menu appears, then press the Next button. Alternatively , allow the DVS 605 to time‑out (after 20 seconds). Submenus are accessed fr om a main menu by pressing the Next button. When within a submenu, press the Menu button to go out of the submen[...]

Input Configuration This menu allows the user to adjust various input configuration settings such as video signal type, film mode, horizontal and vertical start position, horizontal and vertical active pixels, total pixel number , phase, and EDID settings for the selected input. The selected input is shown as (x) on the LCD screen images. INPUT CON[...]

Output Configuration The output configuration menu allows selection of output resolution and r efresh rates, analog output types (RGBHV , RGBS, RGsB and Y , B‑Y , R‑Y), sync polarity , HDMI format, HDCP notification display , genlock setting, and of fset values. RESOLUTION 1365x1024@60 VGA FORMAT RGBHV SYNC H- V- Rotate either to select VGA for[...]

When a new custom rate has been captured or uploaded, the on‑scr een display (OSD) dynamically updates with the new rate for that custom slot. For example if a custom 480p EDID is uploaded to slot C1, the LCD would read “C1: 720x480”. These five custom slots are shar ed between custom output resolutions (based on pr eferred timings 1 block) a[...]

HDCP Status: Inputs & Outputs Through a series of SIS commands (see “ SIS Communication and Contr ol ” starting on page 34) the DVS 605 has the ability to report HDCP status of the HDMI input signals as well as connected HDMI sink devices. When the unit is queried, it reports feedback on the specified input (source) or output (sink) as foll[...]

• SDI Genlock (SDI models only) — This locks the output vertical refr esh rate to the applied analog genlock input on the SDI models. In the SDI Genlock mode, the output resolution and r efresh rate of the DVS 605 must be set to exactly match the applied analog genlock signal to ensure a true genlock to the applied SDI Genlock signal. If the[...]

Audio Configuration (All Models) Audio Configuration allows the user to set volume level (0 dB to ‑100 dB range), turn audio mute on or off, adjust input gain and attenuation levels (–53 dB to +9 dB range) for the current analog input. It also allows selection of an input audio format (none, analog, 2‑channel digital, full digital, 2‑channe[...]

Advanced Configuration The following flowchart provides an overview of the Advanced Configuration submenu The options are Auto‑Image (on or of f), aspect ratio (fill or follow), auto memory (on or off), overscan (none, 2.5%, and 5.0%), switch type (dissolve or cut), test patterns (see table on page 25), OSD duration, temperature (device r eading [...]

Auto-Image Use either Adjust knob ( [ { ) to turn Auto‑Image on or off (default). When enabled and a new input frequency is detected, the DVS first applies an existing Auto Memory for the signal (if Auto Memory is enabled), or , if no entry exists, performs an automatic Auto‑Image on the new signal. This automatically attempts to size/position [...]

Overscan Use the horizontal Adjust knob ( [ ) to select input video type (RGB, YUV , RGBcvS, S‑video, composite, or HDMI), and the vertical Adjust knob ( { ) to select the overscan mode (None, 2.5% or 5.0%). Overscan is specific to each input signal type. This zooms and crops SMPTE inputs to mask edge effects and ancillary data that ar e common i[...]

T emperature This is a read‑only menu that gives the internal temperature (degr ees C and F) of the connected device. No adjustments can be made. Factory Reset This menu allows the user to reset the device to the factory default settings. Press and hold the Auto‑Image button until the display changes. Release and pr ess Auto‑Image again to co[...]

Fr ont Panel Lockout (Executive Modes) T o prevent accidental changes to settings, press the Menu and Next buttons simultaneously for 2 seconds to enable front panel lockout mode (executive mode 2). The menu system returns to the default menu within 10 seconds. Executive mode 2 locks all front panel functions except input switching, PIP enable and [...]

W indow vs. Image Size Position — An Overview The DVS 605 provides users the ability to adjust a window size/position and the image’ s (the content) size/position independently with regards to the output raster . This independent control is available for both the Main and PIP windows allowing the user comprehensive flexibility in output configu[...]

Pictur e-in-picture (PIP) Mode The DVS 605 can display two images on the screen simultaneously . The PIP window can be activated using front panel PIP button, discr ete SIS commands, PIP presets, or the device embedded web pages. See “ SIS Communication and Control ” starting on page 34, or “ Using the Default W eb Pages ” starting on page [...]

PIP Presets A PIP preset contains settings for the size and position of PIP window and which main and PIP inputs that were active when the pr eset was saved. PIP presets ar e used to quickly recall a gr oup of settings that relate to the main and PIP windows and content settings. Sixteen global PIP presets ar e available for the DVS 605. A set of 1[...]

Other DVS 605 Operating Featur es Screen Save Screen Save mode allows the user to configur e what will be displayed on the video output, and for what duration, when the selected DVS 605 input loses an active video signal. By default, the DVS 605 will continue to output muted (black) video and sync indefinitely . Alternatively , users have the abili[...]

Audio Format Audio Source Analog Input Digital Inputs EDID None Muted Ye s Ye s No CEA Analog 5‑Pole Captive Ye s Ye s No CEA LPCM-2Ch Embedded Digital No Ye s LPCM‑2Ch CEA Multi-Ch Embedded Digital No Ye s Multi‑Ch CEA LPCM-2Ch Auto Embedded Digital (when present), else 5‑Pole Captive No Ye s LPCM‑2Ch CEA Multi-Ch Auto Embedded Digital ([...]

Resetting the Unit There ar e three unit r eset modes (numbered 1, 4, and 5), These are available by pr essing the recessed Reset button on the r ear panel with a pointed stylus, pen, or similar item to access it. See the following table for a summary of the reset modes. A TTENTION: Review the reset modes car efully . Using the wrong r eset mode ma[...]

SIS Communication and Contr ol The DVS 605 can be configured and contr olled via a host computer or other device (such as a control system) attached to the r ear panel RS-232 connector or the LAN port or the front panel USB port. Contr ol is made using the Extron Simple Instruction Set (SIS) of commands, or the DVS default web pages. Commands can [...]

Password Information The ] Password: prompt r equires a passwor d (administrator level or user level) followed by a carriage return. The prompt is r epeated if the correct passwor d is not entered. If the correct passwor d is entered, the unit r esponds with ] Login Administrator ] or ] Login User ] , depending on password enter ed. If passwords ar[...]

Symbol Definitions •=Space ] = Carriage return with line feed ¦ or } = Carriage return with no line feed E or W = Escape 14, 24, 28 = Superscripts indicate the error message displayed if the command is enter ed incorrectly or with invalid parameters. See “Error Response References,” on page 35. X! = Input selection, 1-5, (0 = current [...]

X1& = Horizontal and vertical size, 0 to 11000 X1* = Image/window number: 1 = main window , 2 = PIP window X1( = Scaler resolution/EDID emulation: 0 = Automatic: match current output r esolution (default for EDID emulation) LCD reads Match Output 1 = Output 1 (analog VGA connector — available for Save and Export EDID commands only) 2 = Output[...]

X2! = Analog output polarity: 0 = H-/V - (default) 1 = H-/V+ 2 = H+/V - 3 = H+/V+ X2@ = Analog output sync format: 0 = RGBHV (default) 1 = RGBS 2 = RGsB 3 = Y , R-Y , B-Y bi-level 4 = Y , R-Y , B-Y tri-level X2# = User presets or PIP pr esets — 1 to 16 X2$ = Input presets — 1 to 128 X2% = On-screen menu time-out or scr een saver sync timeout, ([...]

X3^ = HDMI output format: 0 = Auto (based on sink EDID), default 1 = DVI 2 = HDMI 444 RGB (0-255, audio, InfoFrames) 3 = HDMI 444 YUV “FULL” (0-255, audio, InfoFrames) 4 = HDMI 444 YUV “LIMITED” (16-235, audio, InfoFrames) 5 = HDMI 422 YUV “FULL” (0-255, audio, InfoFrames) 6 = HDMI 422 YUV “LIMITED” (16-235, audio, InfoFrames) X3&am[...]

X4& = Input signal/SDI genlock 0 = Disabled; (default) 1 = Input signal genlock enabled; locks output vertical to the selected input vertical rate 2 = SDI genlock enabled; locks output vertical to the applied genlock input (“D” models only) X4* = Input signal/genlock status 0 = Input signal / SDI genlock disabled 1 = Input signal / SDI genl[...]

X12% = Connections security level: 0 = anonymous, 11 = user , 1 – 10 = extended security levels 1 thru 10 12 = Administrator X12& = The number of seconds before timeout on the IP connection: min. = 1; max. = 65000; (default = 30 = 300 seconds). If no data is received during the timeout period, the Ethernet connection is closed. Each step = 10[...]

SIS Command and Response T able Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Input selection Video and audio X! ! In X! • All ] Select video and audio from input X! . Video X! & In X! • RGB ] Select video from input sour ce X! . Audio X! $ In X! • Aud ] Select audio from input source X! . View vi[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Input name Write input name EX! , X1$ NI } Nmi X! , X1$] Set the name X1$ for input X! . Read input name EX! NI } X1$] View input X! name X1$ . NOTE: T o clear an input name, a single space character should be entered for X1$ . This resets the input name to the [...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Pixel phase (available only for RGB and YUV auto input signals) Specify a value E X! * X% PHAS } Phas X! * X%] Adjust the pixel phase to specified value X% for input X! . Increment value E X! +PHAS } Phas X! * X%] Increase the pixel phase. Decrement value E X! [...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Picture Adjustments Video mute Mute all outputs to black 1B Vmt1 ] Mutes video and displays black video on all outputs. Mute all sync and video 2B Vmt2 ] Mutes sync and video on all outputs. Unmute all outputs 0B Vmt0 ] Unmutes all outputs. View B X3!] View the [...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Horizontal position (window) Specific value E 1* X1* * X1^ HCTR } Hctr1* X1* * X1^] Set horizontal position to X1^ for window X1* . Increment value E 1* X1* +HCTR } Hctr1* X1* * X1^] Shift window right. Decrement value E 1* X1* -HCTR } Hctr1* X1* * X1^] Shift w[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Horizontal size (image) Specific value E 2* X1* * X1& HSIZ } Hsiz2* X1* * X1&] Set horizontal sizing to X1& for image X1* . Increase width E 2* X1* +HSIZ } Hsiz2* X1* * X1&] Widen the image. Decrease width E 2* X1* -HSIZ } Hsiz2* X1* * X1&] [...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Screen saver mode (action that takes place when no signal is detected on the selected input) Set mode E M X3) SSAV } SsavM X3)] Sets the scr een saver mode to X3) (default: 1 = black). View mode E MSSAV } X3) ] View the current scr een saver mode. Set sync timeo[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Audio input format NOTES: • Selects between analog (5-pole captive screw) or digital (embedded in HDMI input) audio sour ces. • Inputs 1 and 2 X4@ can only be set to 0 or 1; attempting to set these inputs to a digital format yields an E14 response. • Digit[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Presets User presets Recall preset 1* X2# . 1Rpr X2#] Recall user pr eset X2# for selected input. Save preset 1* X2# , 1Spr X2#] Save user preset X2# for selected input. Delete/clear preset E X1* X2# PRST } PrstX1* X2#] Clears user preset X2# , and sets user pre[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Advanced Conguration T est patter n Set test pattern E X2) TEST } Test X2)] Set the test patter n to X2) . View test pattern E TEST } X2)] View the current test pattern. Freeze Freeze all windows 1F Frz1 ] Freeze Main and PIP input windows. Freeze only MAIN w[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Video effect Cut E 0SWEF } Swef0 ] Sets the switch to cut. Dissolve E 1SWEF } Swef1 ] Sets the switch to dissolve. View setting E SWEF } 0 ] (or 1 ] ) View setting (0 = cut, 1 = dissolve). Effect duration Set dissolve duration E X3% EDUR } EDUR X3% ] Sets the ef[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description HDCP input authorization (valid for HDMI inputs only) HDCP Authorized device on E E X! *1HDCP } HdcpE X! *1 ] T urn HDCP Authorized device on for input X! (default). HDCP Authorized device off E E X! *0HDCP } HdcpE X! *0 ] T urn HDCP Authorized device off for in[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Hardwir ed IR port Enable IR port (allows IR) 65*0# IRDisable0 ] Enables the hard wir ed port and allows IR control input. Disable IR port (blocks IR) 65*1# IRDisable1 ] Disables the hard wir ed port (default). View IR setting 65# X( ] View the curr ent IR Disab[...]

Command ASCII Command (host to scaler) Response (scaler to host) Additional Description Information request General information I/i Vid X! • Aud X! •V typ X# • Std X1) • Blk X3! • Hrt X1# • Vrt X1# • Pip X!] NOTE: Aud “ X! ” response is a “-” on the non audio model. “Vtyp” r etur ns the detected input type ( X! *) . NOTE:[...]

SIS Command and Response T able for IP Control Port Command ASCII (T elnet) (host to processor) URL Encoded (Web) (host to processor) Response (processor to host) Additional Description Ethernet data port Set current connection port timeout E 0* X12& TC } W 0%2A X12& TC Pti0 * X12&] View current connection port timeout E 0TC } W 0TC X12[...]

Command ASCII (T elnet) (host to processor) URL Encoded (Web) (host to processor) Response (processor to host) Additional Description Query updated firmware version 4Q 4Q X13! ] Use this command to find out which version of firmware has been uploaded into the pr ocessor post-factory . Example: 4Q 4Q 1.01 * (1.46-DVS 605 Series -Mon, 17 Jan 2012 [...]

Command ASCII (T elnet) (host to processor) URL Encoded (Web) (host to processor) Response (processor to host) Additional Description Set IP address 24 E X10* CI } W X10* CI | Ipi• X10*] X10* = IP addr ess (xxx.xxx.xxx.xxx). Leading zeros in each of the four fields ar e optional in setting values. Read IP address 24 E CI } WCI | X10*] Leading[...]

Command ASCII (T elnet) (host to processor) URL Encoded (Web) (host to processor) Response (processor to host) Additional Description NOTE: A user password cannot be assigned if an administrator passwor d does not exist. Entering a password when the DVS 605 has not been configured yields an E14 response fr om the processor . If the administrator p[...]

Command ASCII (T elnet) (host to processor) URL Encoded (Web) (host to processor) Response (processor to host) Additional Description Re-map port designations Set T elnet port map 24 E {port #}MT } W{port #}MT | Pmt{port #} ] Reset T elnet port map 24 E 23MT } W23MT | Pmt00023 ] Set T elnet to the default port (23) Disable T elnet port map 24 E 0MT[...]

Using the Default W eb Pages The DVS 605 features an on‑boar d web server , displayed as a set of default web pages. These pages allow you to control and operate the DVS 605 unit via a LAN or W AN connection through the RJ‑45 port, using a web br owser such as the Microsoft ® Internet Explorer ® 8 or later , Mozilla ® Firefox ® 6 or later ,[...]

T urning Off Compatibility Mode The DVS 605 default web pages do not support compatibility mode in Microsoft Internet Explorer . T o check compatibility view settings: From the Tools menu of the br owser , select Compatibility View Settings . The Compatibility View Settings dialog box opens. Be sure that the Display all websites in Compatibility Vi[...]

Configuration Pages NOTE: From Har dware pages, click on the Configuration tab . The Configuration pages options are: • Input/Output Configuration • EDID Minder • Image Settings • PIP Settings • Audio Configuration • Preset Management • Device Settings. Figure 32. Global Navigation Bar for the Configuration Page The browser scr een is[...]

Breakaway audio check box (audio models only) Select this check box to enable audio breakaway . The input buttons separate into two columns: video and audio. From the Video column, click the input button associated with the video to be used. From the Audio column, click on the input button associated with the audio to be used. NOTES: When in PIP mo[...]

Input/Output Configuration Page — Input Configuration Panel Click on this button to open to this page. The Input Configuration panel consists of user configurable fields for each of the five inputs. These include; input naming, signal type, aspect ratio, Auto‑Image, Auto Memory , HDCP Authorized status, and film detection. There is also a visua[...]

Aspect ratio Select Fill or Follow from the dr op‑down list to set the aspect ratio. • Fill — The input signal is scaled to fill the entire video output. • Follow — Follows the signal aspect ratio, with respect to the curr ent output resolution setting. A black letter box or pillar box bars may be applied for aspect ratio compensation. Au[...]

Input/Output Configuration Page — Output Configuration Panel The right panel consists of user configurable fields for video outputs. These include: output resolution, r efresh rate, signal format and sync polarity for the analog output, and signal format for the digital output. The switch transition mode between inputs can be set, and a test patt[...]

Digital output signal format Click on the arrow and fr om the drop‑down list box select an applicable signal format. Selectable formats are: Auto (based on sink/display EDID), DVI, HDMI RGB, HDMI YUV 444 Full, HDMI YUV 444 Limited, HDMI YUV 422 Full, HDMI YUV 422 Limited. Switch transition Select either mode, cut or dissolve, to set the transitio[...]

EDID Minder Page Extron EDID Minder is an EDID management pr ocess that automatically manages the EDID information between a digital display device and one or more input sour ces. Click on this button to open the EDID Minder page. From this page an EDID data set can be assigned to any input with an Auto‑Detect, an RGB, or an HDMI/DVI input type. [...]

Assigning EDIDs T o assign EDID to selected inputs: 1. From the inputs scr een (table of inputs) on the right, select the desired input or inputs (see figure below). 2. From the table on the left of the scr een, select an available EDID (represented by a blue, green, or yellow output display icon). 3. Click the Assign button to assign EDID to the s[...]

Image Settings Page From this page signal sampling and pictur e control settings can be set, user and input presets can be saved and r ecalled, and overscan settings can be applied. Click on this button to open the Image Settings page. Figure 38. Image Settings Page Signal Sampling In this section settings for the currently selected input signal ca[...]

Picture Contr ol This section shows the image settings for the selected input. These include brightness, contrast, color , tint, and detail, which can be adjusted and applied to that input. T o adjust the picture settings click and drag the associated slider for any image setting (brightness, contrast, color , tint, or detail) to the desir ed value[...]

Input Presets A total of 128 global input presets ar e available for the DVS 605. An input preset is a user ‑defined set of input and pictur e control settings that can be saved for each source within a system so that they can be recalled whenever the sour ce is applied. Input presets are unique to the signal that was applied when the pr eset was[...]

PIP Settings Page In PIP mode, the DVS 605 can display two images on the screen simultaneously . From this page the PIP settings can be adjusted. This includes input selection, swapping between the main and PIP inputs, adjustment of the picture contr ol settings, main and PIP window position and sizing, and the saving and recalling of PIP pr esets.[...]

PIP picture contr ols These PIP input settings include brightness, contrast, color , tint, and detail. NOTES: • Picture contr ols will not be applied if there is no input signal. Any changes made while there is no input signal will be lost when a signal is detected. • After PIPis disabled, the configured PIP pictur e settings will still appl[...]

PIP presets Sixteen global PIPpresets ar e available for the DVS 605. A PIP preset contains settings for the size and position of PIP . It also contains the main and PIP inputs that were active when the preset was saved. By default the first ten PIP pr esets have settings already associated with them, but they can be overwritten. MAIN MAIN MAIN [...]

Audio Settings Page Using this page each of the audio inputs can be configured, including setting the input format and the gain (for analog inputs). Also the audio output format can be set and adjusted. NOTE: Audio inputs 1 and 2 are disabled for DVS 605 and DVS 605 D models. They do not support analog audio. Input gain cannot be adjusted for digit[...]

2. Click and drag the handle of the Gain slider , or click the up > and down < arrows in the field below the slider , or enter a value in the field. NOTE: Y ou can only adjust the gain and attenuation for an input that is in analog or Auto format. Gain only affects analog inputs T o configure audio output format: 1. From the Output Format dr [...]

Preset Management Page This Preset Management page gives access to assigned input pr esets, user presets, and PIPpresets. Each pr eset can be renamed, r ecalled or cleared. A brief description of the settings contained within each preset type is given at the top of each list. Click on this button to open the Audio Config page. Figure 43. Pr eset[...]

T o clear a Preset: 1. Select the input preset, user pr eset, or PIPpreset that is to be cleared. 2. Click the Clear button located in the same section of the screen. A confirmation dialog box opens. 3. Click OK . If the preset is an input pr eset or a user preset, the pr eset is removed entir ely from the list. If the preset is a PIPpr eset,[...]

HDCP Notification HDCPnotification indicates if HDCP content restrictions ar e preventing a video signal fr om passing to the output. When the Green option is selected, a green scr een with HDCP CONTENTtext is displayed on the output if the connected display device is not HDCP compliant and an HDCP encrypted input has been selected. When the [...]

Auto Switch When enabled, the auto‑input switching priority can be set to either start with the highest active input or the lowest active input. See “ Auto-switching between inputs ” on page 3 for details. T o enable auto-input switching: 1. Select the Enable Auto Switch check box. 2. Select the desired priority option radio button. Either : [...]

Har dware Pages Click on the Hardwar e tab to open these pages. The Hardwar e pages options are: • Unit Information • Device Name • Connection • Firmware Loader • Exec/Power Mode • Date and Time • Password • Reset Device Figure 45. Global Navigation Bar for the Har dware Page Unit Information Page This page gives a non‑configurabl[...]

Device Name Page This page allows the user to assign or change the connected device name. Click on this button to open the page. Figure 47. Device Name Page T o assign or change the name: 1. Enter a name for the device in the name field. This may be up to 24 alphanumeric characters in length with no spaces between characters. If an invalid name is [...]

RS-232 Settings T o configure the RS-232 settings: 1. From the Baud Rate dr op‑down list, select the appropriate baud rate. 2. From the Stop Bits dr op‑down list, select the number of bits used to indicate a byte. 3. From the Bits dr op‑down list, select the number of data bits to transmit. 4. From the Parity dr op‑down list, select the par[...]

T o update the device firmware: 1. Click Browse . The Choose File to Upload dialog box opens. 2. Browse to and select the firmwar e file to upload to the device. V alid firmware files have an EFFor ESFextension. NOTE: Current firmwar e updates can be downloaded from the Firmwar e Download Center page of the Extron website. This file downloads[...]

Power Mode The low power ‑standby state disables all video input pr ocessing and all video outputs to save energy when the DVS605 is not in use. T o set the power mode: 1. Click the radio button for the desired power mode ( Full Power or Low Power - Standby State ). 2. Click Save . Mute Video and Sync Muting the video and sync allows connected[...]

Password Page This page allows the user to set an administrator and user password on the device. Click on this button to open the page. Figure 52. Passwor d Page Administrators and users can view any setting on the device. Administrators have the ability to make adjustments to any setting. Users can only make changes to the following: • Input Sel[...]

Reset Device Page This page allows the user to reset the device. Click on this button to open the page. Figure 53. Reset Device Page There ar e three r eset options available: • Reset scaler settings to default (Retains IP) • Reset scaler settings, and delete user files (Retains IP) • Reset scaler settings, delete user files, and res[...]

Mounting This section describes: • T abletop Mounting • Rack Mounting • Furniture Mounting Mounting the DVS 605 If the DVS 605 is to be rack mounted, it is important to mount it before cabling it. Four rubber feet are included with the unit. Install the feet only if the unit is to be mounted on a tabletop (see “T abletop Placement?[...]

Rack Mounting T o rack mount the DVS 605, tur n off or disconnect all equipment power sour ces and rack mount the DVS 605 unit using the pre‑installed brackets (see figur e below). Rack Mount Bra cke t Figure 54. Rack Mounting the DVS 605 Furniture Mounting Optional furniture mounting brackets (MBU 149) can be used to mount the unit under a table[...]

Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - W est Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 F AX +1.919.850.1001 F AX Extron Europe +800.3987.6673 (Inside Europe Only) +31.33.453.4040 +31.33.453.4050 F AX Extron Asia +65.6383.4400 +65.6383.4664 F AX Extron Japan +81.3.3511.7655 +81.3.3511.7656 F[...]