Español dropdown-ico

Fisher & Paykel MR730 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Fisher & Paykel MR730. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Fisher & Paykel MR730 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Fisher & Paykel MR730 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Fisher & Paykel MR730, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Fisher & Paykel MR730 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Fisher & Paykel MR730
- nombre de fabricante y año de fabricación del dispositivo Fisher & Paykel MR730
- condiciones de uso, configuración y mantenimiento del dispositivo Fisher & Paykel MR730
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Fisher & Paykel MR730 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Fisher & Paykel MR730 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Fisher & Paykel en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Fisher & Paykel MR730, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Fisher & Paykel MR730, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Fisher & Paykel MR730. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    TECHNICAL MANUAL RESPIRATORY HUMIDIFIERS MODELS: MR730 MR720 MR700 MR480 Revision F Issued March 2001 Fisher & Paykel Healthcare Ltd Auckland, New Zealand[...]

  • Página 2

    ii Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 National Office: Fisher & Paykel Healthcare Ltd P.O. Box 14348, Panmure Auckland, New Zealand Telephone: +64-9-574 0100 Facsimile: +64-9-574 0158 Technical Manual for Respiratory Humidifier MR730 Dual Servo MR720 Dual Servo (anaesthesia) MR700 Dual Servo MR[...]

  • Página 3

    iii Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 C ONTENTS P AGE 1.0 MR700 SERIES GEN ERAL SPECIFICATIONS ................................................................................ 1 1.1 Electrical Specifications ..........................................................................................[...]

  • Página 4

    iv Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 4.0 CIRCUIT OPERATIO N ......................................................................................................................... 9 4.1 Introduction .................................................................................................[...]

  • Página 5

    v Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.0 SCHEMATICS, PART LISTS AND MECHANICAL DRAWINGS ................................................ 20 8.1 MR700 Series Circuit Layout Block Diagram .................................................................................................................[...]

  • Página 6

    vi Ref. 185040646 *MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 C.1.2 High Temperature ........................................................................................................................................................... 51 C.1.3 Temperature Fluctuating .................................................[...]

  • Página 7

    1 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 1.0 MR700 S ERIES G ENERAL S PECIFICATIONS _________________________ This documentation defines the technical specifications of the MR730, MR720, MR700 and MR480 respiratory humidifiers, it also includes maintenance and repair procedures. The MR730/720 models are[...]

  • Página 8

    2 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 1.5 T EMPERATURE D ISPLAY Three digit 14mm 7 segment LED (Light Emitting Diode) display. Range 5.0 to 80.0 °C. Below 5.0 °C displays ‘Lo’. Above 80.0 °C displays ‘Hi’. Accuracy 25.0 ± 0.3 °C to 45.0 ± 0.3 °C. 1.6 G LOSSARY OF A BBREVIATIONS EOH The[...]

  • Página 9

    3 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 2.0 O PERATING C ONTROLS A ND M ODES _____________________________ 2.1 A DJUSTABLE C ONTROLS 2.1.1 A IRWAY T EMPERATURE C ONTROL Selects the airway controlling temperature. The range of adjustment is from 31 to 40 °C over a linear scale marked in degrees on the [...]

  • Página 10

    4 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 2.2.3 S TANDBY B UTTON (MR700/720/730 ONLY ) This button has to be depressed for one second to enter or exit the standby mode. When the adjacent amber LED starts to flash (100/minute) the button can then be released and the Humidifier remains in the standby mode.[...]

  • Página 11

    5 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 2 .6 W ARM U P M ODE After initial turn on, warm up mode is entered. In this mode the Low temperature alarm is disabled. The Low temperature alarm is enabled when warm up mode is exited. 2.6.1 W ARM UP MODE EXITING CONDITIONS ( LOW TEMPERATURE ALARM ENABLED ): ?[...]

  • Página 12

    6 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 3.0 A LARMS AND I NDICATORS _____________________________________ 3.1 T EMPERATURE P ROBE A LARM If the airway temperature probe is disconnected or develops a low or high resistance the Temperature Probe alarm will be enabled. Indication is by a ‘- - -' me[...]

  • Página 13

    7 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 3.2.4 C HAMBER T EMP H IGH A LARM This alarm will activate if: • The temperature of gas leaving the humidification chamber outlet is more than 4 °C higher than the chamber set temperature for more than 20 minutes. (The chamber set temperature is the sum of the[...]

  • Página 14

    8 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 Pushing the mute button mutes the audio alarm for ten minutes and restores power to the heaterplate during this time. The Airway Temp Low LED will continue to flash. This alarm is disabled during warmup. See § 2.6.2. If the airway temperature drops below 5°C th[...]

  • Página 15

    9 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 4.0 C IRCUIT O PERATION _________________________________________ 4.1 I NTRODUCTION This section describes briefly the operation of each of the circuit sections. Refer to the circuit diagrams in § 8.5 to 8.8. 4.2 C ONTROL B OARD The one basic control board, with[...]

  • Página 16

    10 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 during calibration to give the desired ramp rate. Thus all points are scanned once every 500 to 600 ms, self calibration performed, and the digital display updated. 4.2.5 P OWER L INE I NTERRUPT (R EVISIONS D/F PCB S ) A sample of the power supply frequency is d[...]

  • Página 17

    11 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 4.3 P OWER B OARD 4.3.1 R EVISION D/F PCB S A bridge rectifier (D13 to D16) supplies power to the 5 V regulator Q7 mounted on the heat sink. This circuit is protected by a 1 A fuse (F1) mounted on the circuit board. The 5 V negative supply stabilized by Q8, is d[...]

  • Página 18

    12 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 5.0 C ALIBRATION ______________________________________________ 5.1 I NTRODUCTION Calibration should be performed after any servicing involving the printed circuit boards. After calibration, perform a performance check as outlined in § 6.0. Note: For instructio[...]

  • Página 19

    13 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 1 Plug in the 41 °C calibration probe. 2 Gain access to the adjustment potentiometers VR4 a nd VR5, by removing the control board from the humidifier front panel. 3 With the Chamber Temp button held down turn on the power switch. Display should show -1- 4 Using[...]

  • Página 20

    14 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 6.0 P ERFORMANCE C HECK _______________________________________ 6.1 I NTRODUCTION This procedure should be used to check the operation and calibration of the MR730/720/700/480. This performance check should be performed after any servicing, and annually as part [...]

  • Página 21

    15 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 6.2.4 A LARMS CHECK MR700/720/730 1 Rotate Temperature Control knob to 37 and check for an Airway Temperature Low alarm. (For an MR720 set to 40 °C and check for an Airway Temperature Low alarm). 2 Rotate Temperature Control knob to 32 and check for an Airway T[...]

  • Página 22

    16 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 6.3.4 A LARMS CHECK - MR480 1 Disconnect the 34.5°C temperature probe and check that the Temperatur e Probe LED flashes and gives an audio alarm. 2 Insert the 41°C temperature probe into the humidifier and check that the Airway Temperature High LED flashes and[...]

  • Página 23

    17 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 7.0 S ERVICING I NFORMATION _____________________________________ 7.1 I NTRODUCTION This section provides information for servicing the MR730/720/700/480 Humidifier. The electronic circuitry is contained on two separate circuit boards, the power board and contro[...]

  • Página 24

    18 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 If you are fitting a Revision H or later power PCB to a Humidifier that has a revision F or earlier control PCB , you will have to ensure correct phase polarity on the transformer secondary wires. To check for correct polarity, turn the humidifier on, if the hum[...]

  • Página 25

    19 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 7.4.1 H EATERPLATES WITH SCREW - IN STANDOFFS For products after S/N:9773XXX19731, the heaterplate standoffs were changed to shoulder bolts that screwed directly into the heaterplate. When fitting these heaterplates,‘click’ the heaterplate springs into the r[...]

  • Página 26

    20 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.0 S CHEMATICS , P ART L ISTS AND M ECHANICAL D RAWINGS ________________ 8.1 MR700 S ERIES C IRCUIT L AYOUT B LOCK D IAGRAM[...]

  • Página 27

    21 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.2 C OMPONENT L AYOUT - R EVISION H AND J PCB Power Board Control Board[...]

  • Página 28

    22 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.3 C OMPONENT L AYOUT - R EVISION F PCB Power Board Control Board[...]

  • Página 29

    23 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.4 L INK P AD L OCATIONS FOR P ROGRAMMING C ONTROL O PTIONS - R EVISION H AND J PCB Control Board( viewed from solder side) Location of Link Pads for Programming Control Options (see Appendix A3) Link Pads[...]

  • Página 30

    24 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 THIS PAGE LEFT BLANK[...]

  • Página 31

    25 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.5 C IRCUIT D IAGRAMS - R EVISION H AND J PCB C ONTROL PCB[...]

  • Página 32

    26 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.6 C IRCUIT D IAGRAMS - R EVISION H AND J PCB P OWER PCB[...]

  • Página 33

    27 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.7 C IRCUIT D IAGRAMS - R EVISION F PCB C ONTROL PCB[...]

  • Página 34

    28 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.8 C IRCUIT D IAGRAMS - R EVISION F PCB P OWER PCB[...]

  • Página 35

    29 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.9 E LECTRICAL P ARTS L IST The electrical components listed below are referenced in accordance with the component layout and the circuit diagrams (see § 8.2 to 8.8). Note: The Control and Power PCB Assemblies listed below are replacement parts for Revision F [...]

  • Página 36

    30 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 R20 Resistor 412E 0.25 W 0.5% Metal Film ..................................................... 325040152 R21, R22, R23, R27, R29 Resistor 820E 0.25 W 0.5% Metal Film ..................................................... 325040136 R25, R35, R40 Resistor 100k 0.25[...]

  • Página 37

    31 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.9.2 P OWER B OARD C OMPONENTS : (R EVISION H AND LATER PCB S ) Reference Description Part Number Power PCB Assembly MR480 Complete .................................................. 043040678 Power PCB Assembly MR700/720/730 Complete ..........................[...]

  • Página 38

    32 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10 M ECHANICAL P ARTS L IST The mechanical components listed below are referenced in accordance with the appropriate exploded diagrams following. 8.10.1 MR480 M ECHANICAL P ARTS Reference Description Part Number 1 Heaterplate Assembly 150 W 100 V .............[...]

  • Página 39

    33 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10.2 E XPLODED D IAGRAMS : MR480[...]

  • Página 40

    34 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10.3 MR730/720/700 M ECHANICAL P ARTS Reference Description Part Number 1 Heaterplate Assembly 150 W 100 V ................................................................................... 043040701 Heaterplate Assembly 150 W 115 V ..........................[...]

  • Página 41

    35 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 Case Body Kit MR730JEU English/French Canadian 043041335 Case Body Kit MR730JHB English/Spanish Baxter ........................................................ 043040715 NOTE: For other Case Body types Specify Model Number eg "Case Front Kit MR720ASU" [...]

  • Página 42

    36 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10.4 E XPLODED D IAGRAMS : MR730/720/700[...]

  • Página 43

    37 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10.5 H EATERPLATE A SSEMBLY P ARTS (MR730/720/700/480) Reference Description Part Number 1 Reflector (added after 01/01/99) ....................................................................................... 641040829 2 Screw M4 × 8 Pan Phil Taptite .....[...]

  • Página 44

    38 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.10.6 E XPLODED D IAGRAMS :H EATERPLATE A SSEMBLY MR730/720/700/480 (I NVERTED V IEW )[...]

  • Página 45

    39 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.11 PCB I DENTIFICATION D IAGRAM[...]

  • Página 46

    40 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 8.12 P OWER PCB H ARNESS C ONNECTION D IAGRAM[...]

  • Página 47

    41 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 9.0 P RODUCT C HANGE H ISTORY ___________________________________ This change history details changes which may have significance for servicing. It does not include changes that are insignificant to users or service technicians. Refer also to change panel on cir[...]

  • Página 48

    42 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 9.1 M ODEL N UMBER E XPLANATION eg MR730AEU (model type MR730, with specific variations as below). The table below lists variations in models that are for general sale, there are some models which are sold to specific customers that are not shown here. First Let[...]

  • Página 49

    43 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 A PPENDIX A ___________________________________________________ A1 C ALIBRATION M ODE Entry to the calibration mode is made by holding down the ‘Chamber Temp’ button and turning on the Mains Power switch. After a two second delay the display should show ‘-[...]

  • Página 50

    44 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 A2.2 E NGINEERING F UNCTIONS : N ON H EATER W IRE M ODE SET Set temperature display (°C) dc Heaterplate duty cycle (%) hP Heaterplate temperature (°C) L Programming link status CP Compare probes (Probe test) i Heaterplate Integral A2.3 I NTEGRAL D ISPLAY The i[...]

  • Página 51

    45 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 Errors EP2 to EP4 can be caused for example by abnormal high differential temperatures on the two thermistors or by rapidly changing input temperatures. EP1 Hardware fault; Q13 short not effective. EP2 Low probe temperature (~0 °C). EP3 High probe temperature ([...]

  • Página 52

    46 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 The data record as received should start with an ‘:’ and end with an ‘LF’. Under abnormal operating conditions however (when there are ‘E’ messages in the display) some or all of the above packets ‘a’ to ‘g’ can be missing. The status informa[...]

  • Página 53

    47 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 A5.4 S ERIAL D ATA I NTERFACE C ONNECTOR A DB9 connector on the side of the humidifier provides the interface connections. pin 2 Remote shut down input (Serial in). pin 3 Serial Data output. pin 5 Humidifier Earth. pin 7 +5 V (30 mA max)[...]

  • Página 54

    48 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 A PPENDIX B __________________________________________________ B1 M AINTENANCE S CHEDULE The MR700 series humidifiers operating software continually monitors the performance characteristics of the humidifier reporting any errors and in the event of a fatal error[...]

  • Página 55

    49 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 B2 M AINTENANCE S CHEDULE C HECKLIST (PHOTOCOPY AND FILE IN MAINTENANCE RECORDS) Type of service check: q monthly q 3 monthly q 6 monthly q yearly Humidifier Serial Number: ___________________________ Date: ______________ Step Method Pass Fail Monthly Check Temp[...]

  • Página 56

    50 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 A PPENDIX C __________________________________________________ C1 T ROUBLESHOOTING G UIDE F OR T HE MR700 S ERIES R ESPIRATORY H UMIDIFIERS This is a guide to possible corrective action in the case of an humidifier alarm condition or malfunction. It is primarily[...]

  • Página 57

    51 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 C.1.2 H IGH T EMPERATURE Condition detected Possible cause F Action to take Airway temperature high alarm activated. Sudden spurious increase in gas flow. Wait for temperature to fall below threshold. Heater wire too close to temperature probe. Use shorter heate[...]

  • Página 58

    52 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 Excessive water in expiratory circuit due to rainout. Condensation due to cooling in Expiratory line. Use dual heated circuit. Water ejected from humidification chamber into circuit. Humidification chamber filled beyond maximum water level line. Rduce water leve[...]

  • Página 59

    53 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 C1.7 T EMPERATURE DISPLAY Condition detected Possible cause F Action to take No temperature display, no alarm lights. Humidifier voltage rating incorrect. Select correct voltage rated unit. Heaterplate overheat protector operated. Reset overheat protector. Trans[...]

  • Página 60

    54 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 C2 MR700 S ERIES F AULT F LOW C HART F OR N O G O C ONDITION Check Voltage Rating Of Unit Open Unit and check if thermal cut out under heaterplate has tripped Reset thermal cut out and find reason for fault Check for mains voltage at Connector J5 on power board [...]

  • Página 61

    55 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 APPENDIX D _________________________________________________ D1 C LEANING OF H UMIDIFIER H EATER B ASES These are the recommended cleaners for use with Fisher and Paykel heaterbases as of the time of revision of this technical manual. The disinfectants in the li[...]

  • Página 62

    56 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 APPENDIX E _________________________________________________ E 1 A DDITIONAL D YNAMIC P ERFORMANCE C HECK OF H UMIDIFIERS This procedure is optional and may be used to check the dynamic operation of MR730/720/700 and MR480 humidifiers. This performance check can[...]

  • Página 63

    57 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 3 Connect the Heater Wire cable to the humidifier. 4 If a gas supply is used, set to 5- 10 l/minute, if no gas supply used, the breathing tube should be supported from the patient end so that it drops vertically over its entire length to the top of the chamber. [...]

  • Página 64

    58 Ref. 185040646 MR730/720/700/480 Technical Manual ¯ Revision F ¯ Issued March 2001 E.3.2 S ETUP 1 Fill the humidification chamber with water and slide on to the heaterbase. 2 If a gas supply is used, set to 2- 10 l/minute, if no gas supply used, the breathing tube should be supported from the patient end so that it drops vertically over its en[...]