Fortec Innovation manual

USER’S GUIDE INNOVATION[...]

3 Table of Contents 1 General Information………………………………… …………………………..………………… ………6 2 Main Features…………………………… ………………………………………… ……………..………..6 3 For Your Safety …………………………………………………?[...]

4 11 System setting…………………………… ………………………………………… …………………….32 11.1 Language Setting.......... ............... ................ ............... ............. ............ ............. ............ ......32 11.1.1 Menu Language......... ................ ............... .............[...]

5 14.17 PVR Function …………………… ………………………………………… ………….…………..41 14.17.1 Recording file list …………………………… ……………………………….… ……….41 14.17.2 Recording …………………… ……………………………… ………………….……?[...]

6 1. General Information Fortec Star’s Innovation High Definition Satellit e Receiver allo ws you to view a variety of programs provided via sate llite. The Set-top- box (STB) is fully compliant with MPEG2 and MPEG4 H.264, based on DVB S and DVBS2 transmi ssion standards for in -hom e reception of digital satellite services including High Definit[...]

7 FCC WARNING This equipment has been tested a nd found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designe d to provide reasonable protection against harmful interference in a residen tial inst allation. This equipment generat es, uses and can radiate radio frequency ene rgy and, [...]

8 IMPORTANT SAFETY INFORMATION 1. READ THESE INSTRUCTIONS. 2. KEEP THESE INSTRUCTIONS. 3. HEED ALL WARNINGS. 4. FOLLOW ALL INSTRUCTIONS. 5. DO NOT USE THIS APPARATU S NEAR WATER. 6. CLEAN ONLY WITH A DRY CLOT H. 7. DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. Install in accordance with t he manufacturer’s instructions. 8. DO NOT INSTALL NEAR ANY[...]

9 IMPORTANT SAFETY INFORMATION POWER SOURCES - This unit should be operate d only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. OUTDOOR ANTENNA GROU NDING - If an outside antenna or cable system is connected to the unit, be sure[...]

10 • DO NOT STACK ANY HEAVY ITEMS ON THE RECEIVER. • DO NOT CONNECT OR MODIFY CA BLES WHEN THE RECEIVER IS PLUGGED IN. PRECAUTIONS This Set Top Box (STB) has been manufactu red to meet international safety standards, includi ng those set by the FCC and Underwriters Labo rato ries (cUL). Please read the following safety precautions carefully bef[...]

11 4. ACCESSORIES Please check if the following ac cessories are encl osed: • Operating User Manual • Remote Control Unit • Batteries (AAA Type), quantity: 2. • Power Cord • HDMI cable Note: If any of the accessories listed above are mi ssing, please contact the local sale s outlet where this product was in itially purchased.[...]

12 5. UNIVERSAL REMOTE CONTROL FUNCTIONS 1. Open the battery cover on the re ar of the remote control. 2. Insert the two AAA batteries and ensure that the polarities (+ and -) are aligned correctly. 3. Replace the battery cover to the origin al position. 4. Replace the batteries sim ultaneously. 5. Dispose batteries ba sed on the local environmenta[...]

13 34. Sw ap ( ): Switches between the main picture and sub pictu re in PIP mode Rewind jump function at HDD play. (Application as running cha nge), 35. Move ( ): Moves the location of the sub picture in PIP mode. Forwarder jump func tion at HDD play. (Applic ation as running change), 36. PIP CH ( / ): Chang es the channel in the sub pictu re windo[...]

14 6. Front and Rear Panel Controls 6.1 Front Panel 1. Power Button: Turns the receiver ON/OFF. 2. 10 Digit VFD Display: Displays the current channel n umber, channel name or time. 3. IR Sensor: Receives the Remote Control Unit sign al. 4. Menu/Exit Button: Displ ays the main menu on the scre en and returns to viewing the TV (Exit All). 5. Back Bu [...]

15 6.2 Front Panel Display 1. Indicates Power ON/OFF. 2. Indicates slee p timer set. 3. Indicates mut e mode. 4. Indicates locked ch annel. 5. Indicates scrambled ch annel. 6. Indicates Dolby Digital ch annel. 7. Indicates HD broadcasting channel. 8. Indicates US B connection. 9. Indicates MP 3 play. 10. Indicates IR sensor. 11. Indicates operation[...]

16 6.3 Rear Panel Connections 1. AC Main Co nnection: The input AC voltage range is 95V to 250V, 50/60Hz sup ply. 2. RS-232 Data Interface: Conne ction to a PC or other receiver for software update and ch annel list data transfer. 3. Digital Audio Outpu t (Optical): Optical digital audio output for connection to a Home Theatre System with integrate[...]

17 7. Connection Diagrams 7.1 Connect your STB to various systems 7.1.1 Connect STB to Digital TV Set - HDMI • Connection to digital TV which can su pport HD re solution using HDMI port. • Set STB’s video output mode to 1080i or 720p or 576p or 48 0p from the menu • When connecting via HDMI, you do not need to connect audio cables. 7.1.2 Co[...]

18 7.1.3 Connect STB to Digital TV and VCR set – S CART or S-VIDEO • Connect your STB to a TV set with a SCART cable. • Connect your STB to a VCR set with SCART cable. • Connect your STB to Digital TV set with an S-Video cable. 7.1.4 Connect STB to an Audio Sy stem – Optical • If you have an AUDIO DAC with S/PDIF Optical or Coaxial cabl[...]

19 7.2 Connect your STB to Dish 7.2.1 Single Dish • Connect the satellite antenna cable to IF Input port on your STB. 7.2.2 DiSEqC 1.0 Connection • If you want to use a DiSEqC switch for more th an one satellite, connect the LNB OUT from the satellite dishes to the DiSEqC switch IN co nnectors, and connect the DiSEqC switch OUT connector to the[...]

20 7.2.3 DiSEqC 1.2 or USLALS (STAB) Connection (motorized dish sy stem) • Connect the output of DiSEqC 1.2 or STAB motor to IF Input port of your STB. • For more complete instruction s in installing a motor or assembling a dish, you can vie w instructional videos on Fortec Star’s web site (www.fortecstar.com).[...]

21 8. Menu Structure 8.1 Installation Antenna Setup Multisat Scan Advanced Scan Sat/TP Edit 8.2 Channel Edit Channel List Parental Control Delete Channels Factory Setting S/W Transfer 8.3 System Setting Language Setting TV Setting Time Setting Other Settings 8.4 Common Interface Slot 1: Shows information about the CAM in this slot Slot 2: Shows inf[...]

22 9. Inst allation 9.1 Welcome to Fortec S t ar HD W orld y The very first time you turn your receiver on, or af ter a Factory Reset, the language sele ction menu appears on your TV screen. y Use the e / f / ▲ / ▼ buttons to select the language. y Press OK button to go to next step. 9.2 How to Set Up your Antenna 9.2.1 Antenna Settings y Selec[...]

23 9.2.2 DiSEqC 1.2 y Select Antenna-DiSEqC 1.2 using e / f buttons in Antenna Setup mode. y Press OK to access the DiSEqC 1.2 set up menu. y To define the Set-up limits, press OK on the correspondi ng row. x Move East/West: Press e / f buttons to move the motor. x East Limit: Press OK button to fix East Limit. x West Limit: Press OK button to fix [...]

24 9.3 Default Channel loading The receiver has the most popular chan nels alre ady downloaded in the memo ry (this feature will vary for the different regions and may not be avail able for all regio ns). To load the pre-stored channels, simply press the GREEN button on the remote control. If your antenna setting s don’t support the satellites fo[...]

25 9.3.3 Advanced Scan Function • To access the Advanced Scan menu from the Antenna Setup, press the WHITE button on the remote control. • In this menu, you can scan a specific tra nsponder from the list. • You can scan a new transponde r as well by adding its frequency, symbol rate, and polarity. • Select the satellite by using the e / f b[...]

26 9.4 Sat / TP Edit 9.4.1 To edit a TP • Select a satellite from the list. • Press the f button to move to the TP section. • Press the RED button to choose delete, edit or add a TP. 9.4.2 Modify TP Informati on • T o modify the TP inform ation, move to the satellite you want and then press the f button to move to the TP list . • Select t[...]

27 9.4.5 Edit a Satellite • Use the ▲ / ▼ buttons to select the satellite you want to edit. • Press the RED button. • Choose Delete if you want to delete the satellite. • Choose Edit if you want to rename the satellite. • Type the new name you want, press OK to Save and press Back to return to the previous menu. • To go back without[...]

28 10. Channel Edit 10.1 Channel Lists The default Channel List is for the chann els from all satellites. If you want to list the channels by an individual satellite, press the Sat button and select the satellite. In this menu you can delete, edit, move or add ch annels to the favorite lists. To do any of these functions you have to select the chan[...]

29 10.2 Parental Control 10.2.1 Parental Control (Channel Lock) • Press the Menu button. • Select "Parental control” from the Chann el Edit Menu using the ▲ / ▼ buttons and press the O K button. • When the "Enter Password" message appears, ente r the password. • The factory default user password is '0000'. •[...]

30 10.2.6 Adult Channels • If you want to sort adult channel, please select Adult channels “On” usi ng e / f buttons. • To select On in Adult channels, the adult channel fro m current channel move to the adult channel folder in favorite. 10.3 Delete Channels • Go to the Main Menu. Select "Channel Edit", then select “Delete Cha[...]

31 10.5.2 System Update Never transfer software or data from a different model receiv er or from a source other then the official Fortecstar websites. If transfe rri ng softwar e to the receiver using your PC, be sure to use the correct file. Software for most Fo rtec Star receivers can be found on Fortec’s Web site at www.fortecs tar. com. If re[...]

32 11. System setting 11.1 Language Setting 11.1.1 Menu Language • Press the e / f buttons to see a li st with the available languages. • Select your language and confirm it with OK. • The selected menu langua ge will be applied to the entire menu. 11.1.2 Audio Language y Press the e / f buttons to see a list with the available language s. y [...]

33 11.3 Time Setting 11.3.1 Time Zone y Press the e / f buttons to see a list with different time zones. y Select your Time Zone and confirm with OK. y Current time and data are automati cally set by the broadcasting signal from the satellite. 11.3.2 Summer time y Select “On” if your country is using Daylight Saving Time. y Select “Off” if [...]

34 11.4.6 VFD Display y Select the display option using the e / f buttons. Choose from displaying the channel name only, the channel name and the channel number, or the time. 11.4.7 System Information y This shows the information for the curren t software status. y Use this to check the software version or release date of the current software befor[...]

35 13. Utility 13.1 Calendar y Press e / f buttons to cha nge the month. y Press ▲ / ▼ buttons to change the year. 13.2 Calculator y Press e / f or ▲ / ▼ buttons to select numbers. Confirm the numbers by pressing OK. y You can type the numbers from the remote control as well using the numeric buttons. 13.3 Game Tetris y Play: Start game by [...]

36 14. Basic Function 14.1 General Information 14.1.1 Info Bar The info bar is displayed with the following informatio n when pressing the Info ( ) button. 1. Channel num ber and name. 2. Indicates TV or Radio cha nnel. 3. EPG for current and next program. 4. Satellite name for current cha nnel. 5. CAS. 6. Signal level. 7. Signal quality. 8. Curren[...]

37 14.3 Teletext • Press TTX button to enter "OSD Text" display. • If the channel broadcasts teletext, the teletext icon on the info bar will be highlighted. • The "OSD Text" is utilizing the built-in teletext decoder of this receiver. It can be used also with TV monitors or projectors that don't have an integrated te[...]

38 14.7 Listening to the Radio • To listen to the radio, press TV/Radio button on the Remote Control. • To return to TV viewing, press TV/Radio button again. 14.8 Last Channel y Press the Last (YELLOW) button to display the Last Channel List menu. y It displays the last 5 channels viewed. • If you want to go back to one of the last five chann[...]

39 14.11 Favorite Function y If you are looking for a channel which is alre ady in one of your Favorite lists, you can find it easily by pressing the Fav.(WHITE) button on the remote control. y Press the Fav.(WHITE) butt on to display the favorite lists. y By repeatedly pressing the Fav.(WHITE) button, the list will change to the next Favorite list[...]

40 14.13.3 Management • HDD Information: To read info rmation on External memory.(total size, used size, free size) • Format HDD: To format external memory with FAT32. • Remove Device Safely: To select “Remove device safely” before remove external memo ry. Note: If external memory is removed without Selection of “Remove Device Safely”[...]

41 14.16 Power Search Enables the receiver while in “STANDBY MODE” to rescan satellite details in order to add o r adjust Transponder Frequ ency data and individual cha nnel data. This is extrem ely useful if the various satellites make reg ular changes to data. Ie ASTRA 28.2; ASTRA 19.2; HOTBIRD 1 3. y In the “SYSTEM SETTING” Menu. y Go to[...]

42 14.17.3 Time shift • While watching TV, just press the Timeshift ( ) button. • Default time of timeshift is 30 min. • The picture will freeze, no sound will be heard and the timeshift recording will start. • To start the play of the Time Shift recording by pressing the Play ( ) button. 14.17.4 Trick Mode • Slow ( / ) - When playing fil[...]

43 15. Troubleshooting There may be various reasons for the abnormal behavior of the receiver. Check based on the procedure shown in the table below. Problem Solution No display VFD on the front panel. Connect power cord properly into the powe r outlet and turn on the front panel AC power switch. No picture Ensure that the STB is switched on. Check[...]

44 16. Technical Specifications Tuner & Demodulator Input Connector F-Type, Female, IEC 169-24 Input Frequency Range 950MHz ~ 2150 MHz RF Input Signal Level -65dbm ~ -25dbm LNB Power & Polarization Vertical: +12V ~ +14V Horiz ontal: +17V ~ +19V Current: Max.500mA with overload protection 22KHz Tone Frequency: 22KHz, +/-4KHz Amplitude: 0.6V,[...]

45 Power Supply Input Voltage AC 95 ~ 250V, 50/60Hz Type SMPS Power Consumption Running Max 40 watts Physical Specification Dimension (W x D x H) 340 x 230 x 65 mm Weight 2.7 kg Operating Temperature 0 ~ 40 degree Storage Temperature -20 ~ 60 degree[...]

46[...]

47[...]

48[...]

49[...]

50[...]

51[...]

52[...]

53[...]

54[...]

55[...]

56[...]

57[...]

58[...]

59[...]

60 .[...]

61[...]

62[...]

Fortec Communications Inc., Mississauga, ON, Canada L4W 5A7 Fortec Middle East LLC, Dubai U.A.E. Fortec Star Communications Ltd. , Sheffield, England, S2 4SU Fortec Europe BV, 5048 AB Ti lburg, The Netherlands www.fortecstar.com © 2007 Fortec Communications Inc.[...]