Fujitsu Siemens Computers BS2000/OSD manual

U25339-J-Z126-1-7600 1 1 Intr oduction The range of BS2000/OSD servers has been e xtended b y the addition of the S130 series. The spectrum of user facilities of the ne w models lies between the S110 and H130 server series. They are po werful systems f or scientific and commercial applications. The S130 Business Ser ver (or cluster) has a modular [...]

2 U25339-J-Z126-1-7600 Summary of contents Introduction 1.2 Summary of contents This operating manual co vers the hardw are operating functions of the S130 Business Ser ver with the 3970-SKP service/console processor . The chapters “Ov er view”, “Controls and indicators” and “Standard processing in SVP mode” provide inf ormation on hard[...]

U25339-J-Z126-1-7600 3 2 Impor tant instructions This chapter cov ers the most impor tant saf ety instructions. It also includes some man uf ac- turer instructions and notes on radio interf erence. 2.1 Safety instructions This de vice fulfills the prev ailing safety requirements f or information technology equipment, including electrical office m[...]

4 U25339-J-Z126-1-7600 Manufacturer instructions Important instructions ● The cables m ust be laid in such a wa y that there is no danger of any one tripping ov er them and they cannot be damaged. ● Data transmission lines must not be connected or disconnected during electrical storms. ● Ensure that no f oreign bodies (e.g. nec klaces, paperc[...]

U25339-J-Z126-1-7600 5 3 Overview This chapter provides inf or mation on the configuration le vels and the configur ation of the S130 Business Ser ver series and the concept of system operation. Figure 2: S130 Business Server , global storage and battery unit The S130 Business Ser ver comprises two cabinets together with an additional cabinet f o[...]

6 U25339-J-Z126-1-7600 Configuration levels of the S130 Business Server Overview If the HVZ (high-av ailability feature) option S130K-1H is a vailab le, a def ective processor can be replaced with the high-av ailability processor (the high-availability f eature is only av ailable f or the models S130-C, S130-E and S130-P). Figure 3: Hardware ov er[...]

U25339-J-Z126-1-7600 7 Overview Concept of system operation 3.2 Concept of system operation System operation is described in the chapter “Basics of system operation“ of the “SINIX-2000 V7.0“ [1] manual. The f ollowing section lists the most impor tant hardware and software components f or S130 operation. 3.2.1 Hard ware The f ollowing hardw[...]

8 U25339-J-Z126-1-7600 Concept of system operation Overview ● The ser vice/console processor (3970-SKP) with the SINIX operating system. Operation of the S130 system tak es place via a local PC: the 3970-SKP ser vice/console processor . S130 and 3970-SKP communicate with one another in three w ays: – serial line (V .24) – type-2 I/O channel ([...]

U25339-J-Z126-1-7600 9 Overview Concept of system operation 3.2.2 Software The f ollowing software components pla y an impor tant role in S130 operation: ● Window interf ace The SINIX operating system is run on the 3970-SKP . One component of SINIX is the window interf ace based on the X Window system (see the ”SINIX-2000 V7.0” [1] manual). A[...]

10 U25339-J-Z126-1-7600 Concept of system operation Overview 3.2.3 A uthorization control The access to operation of the BS2000, SVP and SINIX system components is protected: ● Access to the BS2000 console If you try to make an entry in a BS2000 control window after the system has been star ted up for the first time , you will be requested to en[...]

U25339-J-Z126-1-7600 11 4 Contr ols and indicator s The f ollowing controls and indicators are provided f or the S130 Business Ser ver: – control panel on the Business Ser ver cabinet, page 12 – control panel on the global storage cabinet, page 12 – EMERGENCY ST OP switch, page 19 The S130 is operated using the operator terminals on the ser v[...]

12 U25339-J-Z126-1-7600 Control panel on the Business Server cabinet Controls and indicators 4.1 Contr ol panel on the Business Server cabinet The control panel is connected with the ser vice processor (SVP) in the S130 Business Ser ver . The ph ysical structure of the control panel is illustrated in the follo wing diagram: Figure 4: Control panel [...]

U25339-J-Z126-1-7600 13 Controls and indicators Control panel on the Business Server cabinet Inf or mation is displa yed on the LCD displa y in the follo wing format: Meanings: Line Displa y field Displa y Meaning Line 1 Maintenance mode none User mode CE Maintenance mode CM Hot system maintenance mode T est mode none Normal mode T T est mode Clus[...]

14 U25339-J-Z126-1-7600 Control panel on the Business Server cabinet Controls and indicators PO WER COMPLETE This green light illuminates after the system po wer controller has ter minated the s witching on sequence without errors. The light is e xtinguished when the POWER OFF ke y is pressed. SYSTEM This green light illuminates when the processing[...]

U25339-J-Z126-1-7600 15 Controls and indicators Control panel on the Business Server cabinet 4.1.2 Button functions LCD B A CK LIGHT The LCD displa y ST A TUS (bac kg round) is illuminated f or five minutes when y ou press this button. The lights go out immediately when y ou press this button again. PO WER ON When this button is pressed, the po we[...]

16 U25339-J-Z126-1-7600 Control panel on the global stora ge cabinet Controls and indicators 4.2 Contr ol panel on the global storage cabinet The control panel is connected to the ser vice processor in global storage. The ph ysical structure of the control panel is illustrated in the follo wing diagram: Figure 5: Control panel on the global storage[...]

U25339-J-Z126-1-7600 17 Controls and indicators Control panel on the global storage cabinet The inf or mation is shown on the LCD displa y in the follo wing format: Meanings: Line Displa y field Display Meaning Line 1 Maintenance mode none User mode CE Maintenance mode CM Hot system maintenance mode T est mode none Nor mal mode T T est mode SSU st[...]

18 U25339-J-Z126-1-7600 Control panel on the global stora ge cabinet Controls and indicators PO WER COMPLETE This green light is lit up after the system po wer controller has terminated the s witching on sequence without any errors . The light is extinguished when the PO WER OFF button is pressed. SSU CHECK The displa y illuminates if there is an e[...]

U25339-J-Z126-1-7600 19 Controls and indicators EMERGENCY STOP switch 4.3 EMERGENCY ST OP switc h Not only the Business Ser ver cabinet, b ut also the global storage and batter y cabinets each hav e an EMERGENCY STOP s witch. If the EMERGENCY ST OP switch on the S130 is pressed, global storage is also s witched off . If you wish to cut po wer to th[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 21 5 Switching the S130 Business Server on and off This chapter describes the various technical options for s witching the S130 Business Ser ver on and off , depending on the hardware. 5.1 Switching the S130 on and off using the contr ol panel If the SKP is not linked to the S130 via the on/off f acility (optional), the S130 mu[...]

22 U25339-J-Z126-1-7600 Switching the S130 on and off using the contr ol panel When both systems are ready , i.e. all windo ws on the 3970-SKP hav e been opened and the LCD displa y on the S130 no longer shows any P codes , you can log in on the SVP (see page 34ff) and star t the BS2000 system via PROGRAM LO AD FRAME: DET AIL-1 (see page 51). If a [...]

U25339-J-Z126-1-7600 23 Switching the S130 on and off from the SKP c) Y ou can also terminate the SINIX system using the on/off button on the SKP . How e v er , please make note of the f ollowing: If the SKP is s witched off using the button, it sends the command /shutdo wn or a self-defined /run xxxx command to any running BS2000 system before it[...]

24 U25339-J-Z126-1-7600 Switching the S130 on and off fr om the SKP Y ou access the “Switching on / off the host” f or m via the sysadm menu: Ê Select or open a SINIX screen Ê Login: root or sysadm Ê Enter pass word Ê F or login with root: enter sysadm The SINIX system administration windo w is display ed. Ê Select the menu item “sinix_2[...]

U25339-J-Z126-1-7600 25 Switching the S130 on and off from the SKP Ê Select the menu item “host”: Ê Select the menu item “host - The P ower ON/OFF of the Host”:[...]

26 U25339-J-Z126-1-7600 Switching the S130 on and off fr om the SKP The “Switching on / off the host” f or m is displa yed: Inf or mation on operation of the FMLI interf aces can be f ound in the “SINIX-2000 V7.0” manual [1]. By entering YES for one of the two questions at the bottom of the f or m follo w ed b y the ( CHOICES ) ke y , you c[...]

U25339-J-Z126-1-7600 27 Switching the S130 on and off from the SKP The s witching operating is perf or med after you press the ( SAVE ) key . P3[...]

28 U25339-J-Z126-1-7600 A utomatic switching on/off of the S130 via the SKP 5.3 A utomatic switching on/off of the S130 via the SKP T o switch the S130 on and off from the SKP , it m ust hav e the optional on/off facility . The on/off f acility is linked to the SKP via the V .24 interf ace COM2. Y ou access the “Switching on / off the host” f o[...]

U25339-J-Z126-1-7600 29 Automatic switching on/off of the S130 via the SKP The “Switching on / off the host” f or m is displa yed:´ By entering YES for the two questions at the top of the windo w , you can specify whether the S130 should be s witched on automatically if the 3970-SKP is s witched on or SINIX is star ted on the 3970-SKP , and wh[...]

30 U25339-J-Z126-1-7600 Time-driven switching on and off of the SKP and S130 5.4 Time-driven switc hing on and off of the SKP and S130 The SKP can s witch itself and the S130 on and off at a cer tain time. Definition of the time at which the SKP and the S130 are to be s witched on/off, a shutdown command, and the length of the w ait time bef ore t[...]

U25339-J-Z126-1-7600 31 Switching the SKP and S130 on and off using ATOP 3914 5.5 Switching the SKP and S130 on and off using A T OP 3914 The S130 can also be s witched on automatically using the SKP in conjunction with the A T OP 3914. The optional on/off f acility is required for this . Further more, the S130 must be configured to s witch on and[...]

32 U25339-J-Z126-1-7600 Switching the S130 on and off fr om a remote system 5.6 Switching the S130 on and off fr om a remote system Switching on and off can be carried out from a remote system using a modem/DCU. Inf or mation on operating the DCU can be f ound in the data sheet “8323 Data Communi- cation Unit“ [5]. The optional on/off f acility[...]

U25339-J-Z126-1-7600 33 6 Standar d pr ocessing in SVP mode Jobs are assigned to the ser vice processor via special SVP menus , so-called SVP frames. All the inf or mation you require as an operator w or king with SVP frames can be f ound in this chapter . Y ou will find instructions on the use of all user frames in the original “GS8600 MODEL GR[...]

34 U25339-J-Z126-1-7600 In voking an SVP frame Standard processing in SVP mode 6.1 In v oking an SVP frame By def ault, an SVP window is configured with the label “SVPST0 #1 (computer name)” to operate the SVP . Figure 7: Overview of the X window system windo ws (example) Y ou can enter into SVP operator mode at the oper ating ter minal by cli[...]

U25339-J-Z126-1-7600 35 Standard processing in SVP mode Invoking an SVP frame Figure 8: SVPST0 #1 window Ê Select the “Standard par tner ($KVPHV0)” function by pressing the k ey or “Last connection ($KVPHV0)” by pressing the ke y . Confir m with the ke y . S C ENTER[...]

36 U25339-J-Z126-1-7600 In voking an SVP frame Standard processing in SVP mode The pass word entr y window is displa yed: Figure 9: SVPST0 #1 window (pass word entry) Ê Enter the pass word f or the specified user ID and press . If the correct pass word has been entered, the f ollowing windo w appears after a shor t pause: – after star ting the [...]

U25339-J-Z126-1-7600 37 Standard processing in SVP mode General frame structure 6.2 General frame structure Figure 10: General structure of an SVP frame Each SVP frame is divided into diff erent areas: Lines 1 - 21 This is the displa y area of a frame . Here the functions and par ameters that ma y be selected or output are display ed. Hardware-rela[...]

38 U25339-J-Z126-1-7600 General frame structure Standard processing in SVP mode 6.2.1 System status messages in line 22 Figure 11: Format of the status displa y in line 22 Meaning of the status inf or mation in line 22: Column Symbol Meaning 16 - 19 CL -n Cluster ID of the S130; normally CL - 0 22 - 27 none HOST GUEST The system is operated in BS20[...]

U25339-J-Z126-1-7600 39 Standard processing in SVP mode General frame structure 46 - 55 SYS-DO WN CL-ST OP CHK-ST OP COMP-ST OP ST OP PSW -LOOP W AIT RU N LOAD The system ma y be in the system down state. This displa y can also appear when Write-Console messages are output (e.g. SHUTDOWN COMPLETED) and can be deleted with the ke y . In multiple-clu[...]

40 U25339-J-Z126-1-7600 General frame structure Standard processing in SVP mode 6.2.2 System status messages in line 23 The f ollowing picture shows the e xtended area of the system status messages in line 23: Figure 12: Format of the e xtended area of the status display in line 23 Meaning of the status messages in line 23: Column Symbol Meaning 55[...]

U25339-J-Z126-1-7600 41 Standard processing in SVP mode General frame structure 6.2.3 Hard ware status display in line 24 The f ollowing diagr am shows the f or mat of the hardware status display in line 24: Figure 13: Format of the status displa y in lines 24 and 25 Meaning of the status inf or mation in line 24: The FLA G code represents a messag[...]

42 U25339-J-Z126-1-7600 Using frames Standard processing in SVP mode 6.3 Using frames Y ou assign a job to the SVP b y in voking the rele v ant fr ame , selecting the desired function, and specifying the required parameters. T o select a function or specify a par ameter , you must enter the alphanumeric characters sho wn in the frame in the input ?[...]

U25339-J-Z126-1-7600 43 Standard processing in SVP mode Using frames Overview of the SVP function keys The f ollowing ov erview shows the k eys and their functions as v alid f or most SVP frames. In some SVP frames k eys can ha ve another function. This is then shown in the corresponding SVP frame description. Some of the ke ys shown here only hav [...]

44 U25339-J-Z126-1-7600 Using frames Standard processing in SVP mode PF 18 Step Ex ecutes the next command if the S130 is in Single Cycle Instruction Mode. PF 19 ARMSS control Changes the user rights of an existing ARMSS connection. PF 20 Stop only in CE mode : stops the selected CPU PF 21 Star t Star ts the selected CPU PF 22 not assigned PF 23 Mo[...]

U25339-J-Z126-1-7600 45 Standard processing in SVP mode Using frames 6.3.2 Switching between user frames A s witch between the user frames is only possib le within a specified scheme or via an FR command. The possible s witches between the frames are illustrated belo w: Figure 14: Switching between the frames Explanation of figure 14 The frames a[...]

46 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.3.3 Options for s witching between frames on the SKP operating terminal The f ollo wing tab le shows the options f or switching to another fr ame on the SKP operating ter minal. 6.4 User frames and subframes The user frames are used b y the operator f or sending jobs to the SVP a[...]

U25339-J-Z126-1-7600 47 Standard processing in SVP mode User frames 6.4.1 (ML) MODE SELECTION FRAME Figure 15: MODE SELECTION FRAME screen By making entries in this frame and pressing , you can s witch to other frames or e xecute v ar ious basic functions. FUNCTION => per mits either the entr y of a number listed in the EXECUTION column or a let[...]

48 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode EXECUTION The f ollowing functions are e xecuted after the appropriate number is entered in the input fields: The functions are e xecuted according to the entries in the CPU SELECT and ST OP/ST AR T MODE fields (see table on ne xt page)! 1 CPU ST OP stops either the CPU selected [...]

U25339-J-Z126-1-7600 49 Standard processing in SVP mode User frames Note The f ollowing tab le shows all the functions that can be meaningfully combined: Function CPU SELECT STOP/ST ART MODE Eff ect on: CPU ST OP - 1 All CPU all CPUs 0 ... 7 2 T ARGET CPU selected CPU INTERR UPT ST ORE ST A TUS REST ART 0 ... 7 2 T ARGET CPU selected CPU T OD ENABL[...]

50 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.2 (LD) PROGRAM LO AD FRAME: BASIC Figure 16: PROGRAM LO AD FRAME: BASIC screen An IPL is e xecuted b y enter ing a load function and pressing the ke y . The predefined parameters in (A U5) A UXILIAR Y FRAME: LOAD PRESET are used. LO AD FUNCTION => The f ollowing functions a[...]

U25339-J-Z126-1-7600 51 Standard processing in SVP mode User frames 6.4.2.1 (LD) PROGRAM LO AD FRAME: DET AIL-1 Figure 17: PROGRAM LO AD FRAME: DET AIL-1 screen By making entries in this screen and pressing the key y ou can control the ex ecution of an IPL. LO AD FUNCTION => The f ollowing functions are e xecuted after the corresponding number h[...]

52 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode If IPL is terminated nor mally , the device address list is transf erred from the PRESET GROUP to the CURRENT GROUP . If the IPL is unsuccessful, the ne xt device address from the PRESET GROUP is reloaded. If this loading is terminated nor mally , this device address heads the CURR[...]

U25339-J-Z126-1-7600 53 Standard processing in SVP mode User frames DET AIL-2 ST A TUS In this position the current settings of the PR OGRAM LOAD FRAME: DET AIL-2 are display ed. Check the settings . If the y are correct, ex ecute the IPL by pressing . If not, press the ke y to correct the entr ies in PROGRAM LO AD FRAME: DET AIL-2. Special ke y fu[...]

54 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.2.2 (LD) PROGRAM LO AD FRAME: DET AIL-2 Figure 18: PROGRAM LO AD FRAME: DET AIL-2 screen By making an entr y in this frame and pressing , you can set the oper ating mode. VM MODE => Selection of the fir mware to be loaded from SVP 1 NA TIVE f or BS2000 operation 2 EMOS not [...]

U25339-J-Z126-1-7600 55 Standard processing in SVP mode User frames Special ke y functions Sets operating mode . If a loading function has previously been stored in PR OGRAM LOAD FRAME: DET AIL-1 with the key , an IPL with the set parameters is e xecuted. Switches to PROGRAM LO AD FRAME: BASIC (page 50) Switches to PROGRAM LO AD FRAME: DET AIL-1 (p[...]

56 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode Figure 20: ST A TUS DISPLA Y FRAME: SSU screen This displa ys information on the status of the connected global storage. Memory size, batter y status, po wer status, online status , and connect status are displa yed. Special ke y functions Switches to the CLUSTER FRAME (see pre vio[...]

U25339-J-Z126-1-7600 57 Standard processing in SVP mode User frames 6.4.4 (MA) MANU AL OPERA TION FRAME Figure 21: MANU AL OPERA TION FRAME screen By making an entr y in this frame and pressing , you can e xecute v ar ious manual operations. Instructions on this frame are only ex ecuted when the CPU has been stopped (see message in frame line 23). [...]

58 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode The f ollowing tab le shows the additional entries required for each of the three main functions in other input fields: RA TE CONTROL => Defines program oper ation 1 PROCESS continual program oper ation 2 I-STEP step-by-step command e xecution ADRS TYPE => Entr y for addres[...]

U25339-J-Z126-1-7600 59 Standard processing in SVP mode User frames ADRS COMP MODE => Address compare stop mode 1 RESET Switches off address compare stop and resets address compare stop conditions in the fields ADRS TYPE, ADRS COMP SELECT and ADRS SET 2 SET Switches on address compare stop 3 NORMAL Switches off address compare stop 6.4.5 (AD) A[...]

60 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode F ACILITY => P ossible displa ys of memor y areas with v ar ious addres- ses: L LOGICAL logical storage address R REAL real storage address P P-VIR TU AL pr imar y vir tual storage address S S-VIR TU AL secondar y vir tual storage address ABS absolute address KEY memor y protect[...]

U25339-J-Z126-1-7600 61 Standard processing in SVP mode User frames FUNCTION => The f ollowing functions are e xecuted after the appropriate letter is entered and is pressed: A AL TER change and modify register contents D DISPLA Y displa y register contents F ACILITY => P ossible displa ys of registers: GR General register PSW Program status [...]

62 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.6 (ME) MESSA GE FRAME Figure 24: MESSAGE FRAME screen All SVP messages and commands to the SVP are stored in a message file and can be view ed in the MESSAGE FRAME. Special ke y functions one page f orwards, in the direction of the ne wer entries one page backw ards, in the di[...]

U25339-J-Z126-1-7600 63 Standard processing in SVP mode User frames 6.4.7 (CH) CH/SUBCH ST A TUS DISPLA Y FRAME: CHANNEL Figure 25: CH/SUBCH ST A TUS DISPLA Y FRAME: CHANNEL screen By making entries in the input fields and pressing , you can displa y the status of the I/O system. Fur ther subframes are supplied in connection with FUNCTION 2 and 3.[...]

64 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode LINKADR => link address f or type-S channel 01 without director with director : 00 ... FE output por t address = link address LCU ADR => logische control unit address no input required PCHAD => ph ysical channel address 00 ... FF Special ke y functions Displa y of channel [...]

U25339-J-Z126-1-7600 65 Standard processing in SVP mode User frames 6.4.8 (A U) A UXILIAR Y FRAME: MENU Figure 26: A UXILIARY FRAME: MENU screen Y ou can mo ve to other fr ames by making entries in this menu frame and pressing . SELECTION => The f ollowing subframes are displa yed on the screen by entering the appropriate number : 1 REAL CLOCK d[...]

66 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.8.1 (A U1) A UXILIAR Y FRAME: REAL CLOCK Figure 27: A UXILIARY FRAME: REAL CLOCK screen When the screen is inv ok ed, the current date and time of the SVP are displa y ed. Press the ke y before making an entry . Corrections can be entered in the line below . These corrections t[...]

U25339-J-Z126-1-7600 67 Standard processing in SVP mode User frames 6.4.8.2 (A U2) A UXILIAR Y FRAME: IORSF CONTROL Figure 28: A UXILIARY FRAME: IORSF CONTR OL screen The IORSF files are displa yed in this file. The file n umber of the current IORSF is display ed in the CURRENT NO. = field. When you select a function and press the k ey , parame[...]

68 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode SPECIFY SW AP NO . <=> Enter two file numbers which are to be s wapped. Y ou can only mak e entries if you select function 1 bef orehand. Special ke y functions Sets 4 to 7 are displa yed Sets 0 to 3 are displa yed 6.4.8.3 (A U3) A UXILIAR Y FRAME: RELA TED SCB’S This fram[...]

U25339-J-Z126-1-7600 69 Standard processing in SVP mode User frames 6.4.8.4 (A U4) A UXILIAR Y FRAME: P-OFF/IMPL Figure 30: A UXILIARY FRAME: P-OFF/IMPL screen By making an entr y in this frame and pressing , you can s witch the S130 off or re- initialize it. FUNCTION => The f ollowing functions are e xecuted when the appropriate number is enter[...]

70 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.8.5 (A U5) A UXILIAR Y FRAME: LO AD PRESET1 Figure 31: A UXILIARY FRAME: LO AD PRESET1 screen Y ou can predefine the e xecution of an IPL b y making an entr y in this frame and pressing : ST ART MODE => Predefine the loading mode by entering the appropriate number and comm[...]

U25339-J-Z126-1-7600 71 Standard processing in SVP mode User frames 1 ENABLE automatically e xecutes IPL after IMPL 2 DISABLE does not ex ecute IPL, i.e. IPL must be triggered manually using PR OGRAM LOAD FRAME: BASIC or PROGRAM LO AD FRAME: DET AIL-1. INITIAL FRAME => Here you can set the displa y form of the PROGRAM LO AD FRAME. 1 LOAD FRAME ([...]

72 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode EXA MODE => Selection of addressing mode 1 ENABLE e xtended XA mode 2 DISABLE not used on the S130 Business Ser ver ST ART IPL NO => Selection of the IPL Star t Mode number 1 FIX(1) Star t Mode number 1 (automatic star t) 2 CURRENT Star t Mode number of most recently ex ecute[...]

U25339-J-Z126-1-7600 73 Standard processing in SVP mode User frames FUNCTION => The f ollowing functions are carried out by entering the appropriate number: 1 DISPLA Y CFR displa ys current configuration 2 INIT CFR FILE NO. activates selected FILE after IMPL, enter a n umber in the INIT CFR FILE NO. => field 3 DISPLA Y FILE displays config[...]

74 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.9 (MF) MSF FRAME Figure 34: MSF FRAME screen The SVP logs all FLA G codes, whereby the most recent code is gener ally shown in line 24. Special ke y functions one page backw ards, in the direction of the ne wer entries one page f orwards, in the direction of the older entries -[...]

U25339-J-Z126-1-7600 75 Standard processing in SVP mode User frames F rame line 24: Y ou can switch to FLA G code entr ies of other components by making the f ollowing entries in line 24: ssu0: FLA G code entries of SSU0 ssu1: FLA G code entries of SSU1 self: back to the FLA G code entr ies of the cluster ----- MSF FRAME: FLAG CODE LOG DISPLAY ----[...]

76 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.10 (P A) PERFORMANCE ANAL YZER Figure 35: PERFORMANCE ANAL YZER FRAME screen The P A frame is not intended f or use. ---- PERFORMANCE ANALYZER FRAME ---- E02L01F FUNCTION => STATUS DISABLE / STOP 1 ENABLE & ITEM SELECT LOGGING STOP 2 DISABLE 3 START & DISPLAY -- CHP [...]

U25339-J-Z126-1-7600 77 Standard processing in SVP mode Selecting IORSF 6.5 Examples of standar d processing in SVP mode 6.5.1 Selecting IORSF The steps listed below are conditions f or the loading of a par ticular IORSF at the ne xt IMPL or the ne xt time the system is switched on. In the f ollowing e xample the IORSF is selected with Lev el 2. Co[...]

78 U25339-J-Z126-1-7600 Selecting IORSF Standard processing in SVP mode The A UXILIAR Y FRAME: MENU screen is display ed Figure 37: A UXILIARY FRAME: MENU screen In voking IORSF Control F rame Ê Enter 2 in the SELECTION=> field. Press . If the frame code AU2 is entered in the MODE SELECTION FRAME or the FR AU2 command is entered in line 24, th[...]

U25339-J-Z126-1-7600 79 Standard processing in SVP mode Selecting IORSF The A UXILIAR Y FRAME: IORSF CONTROL screen is displa yed: Figure 38: A UXILIARY FRAME: IORSF CONTR OL screen The first f our IORSF are displa yed in the upper por tion of the screen. Y ou can switch to the ne xt four with the ke y , and back with the key . In this e xample th[...]

80 U25339-J-Z126-1-7600 Activating IORSF Standard processing in SVP mode 6.5.2 Activating IORSF The set IORSF must be activ ated with a IMPL: Conditions Y ou must be in the A UXILIAR Y FRAME: IORSF CONTROL screen. Ê Press to s witch back to the A UXILIAR Y FRAME: MENU . Ê Enter 4 in the SELECTION=> field. Press . The A UXILIAR Y FRAME: P-OFF/[...]

U25339-J-Z126-1-7600 81 Standard processing in SVP mode PROGRAM LOAD FRAME PRESET1 6.5.3 Setting up PROGRAM LO AD FRAME PRESET1 In this e xample, y ou specify: ● LOAD function 1 with the name A UT O (A UTO=A utomatic Star tup) f or a POWER ON IPL ● De vice number of the IPL de vice to be used f or a POWER ON IPL (current: 0108) ● A utomatic I[...]

82 U25339-J-Z126-1-7600 PROGRAM LO AD FRAME PRESET1 Standard processing in SVP mode The A UXILIAR Y FRAME: LOAD PRESET1 screen is displa yed: Figure 40: A UXILIARY FRAME : LO AD PRESET1 screen Y ou can reach this screen directly from the MODE SELECTION FRAME by entering the frame code AU5 in the FUNCTION=> field or the command FR AU5 in line 24[...]

U25339-J-Z126-1-7600 83 Standard processing in SVP mode PROGRAM LOAD FRAME PRESET2 6.5.4 Setting up PROGRAM LO AD FRAME PRESET2 In the PROGRAM LO AD FRAME PRESET2 you specify which oper ating mode is to be set after the S130 system is s witched on. The f ollowing are specified in the e xample below: ● VM2000 operating mode ● EXA mode ● A uto[...]

84 U25339-J-Z126-1-7600 IPL in PROGRAM LO AD FRAME: DET AIL-1 Standard processing in SVP mode Catalog parameter s Ê Press the k ey . The values entered are sa ved and thus made known to the SVP . These settings are accessed f or each IPL. 6.5.5 Executing IPL in PR OGRAM LO AD FRAME: DET AIL-1 The IPL can be e xecuted man ually 1according to the se[...]

U25339-J-Z126-1-7600 85 Standard processing in SVP mode IPL in PROGRAM LOAD FRAME: DETAIL-1 In this e xample, the PR OGRAM LOAD FRAME: DET AIL-1 screen is display ed: Figure 42: PROGRAM LO AD FRAME: DET AIL-1 screen LO AD FUNCTION => Enter 3 f or dialog star tup. IPL DEVICE => Enter 3 . UNIT ADDRESS => Enter the device address of the load [...]

86 U25339-J-Z126-1-7600 IPL in PROGRAM LO AD FRAME: DET AIL-1 Standard processing in SVP mode DET AIL-2 ST A TUS The settings in DET AIL-2 FRAME are display ed in detail. Check the settings . If they are correct, e xecute the IPL (see below), if not, correct the entries in DET AIL-2 FRAME (see section “Setting operating mode via PROGRAM LO AD FRA[...]

U25339-J-Z126-1-7600 87 Standard processing in SVP mode Setting operating mode 6.5.6 Setting operating mode via PR OGRAM LO AD FRAME: DET AIL-2 The operating mode can be reset using the PR OGRAM LOAD FRAME: DET AIL-2. This selects the appropriate fir mware f or running BS2000 or VM2000. The f ollowing are specified in the e xample below: ● VM20[...]

88 U25339-J-Z126-1-7600 Setting operating mode Standard processing in SVP mode Activating settings Ê After you ha ve check ed all the settings, press . The f ollowing prompt appears: Press to e x ecute the IPL or to cancel the procedure. Confirm your input with . ENTER *********************************** * * * ARE YOU SURE ? (ENTER Y OR N) N * * [...]

U25339-J-Z126-1-7600 89 7 Operating the BS2000 console Selecting the console window At the operator terminal, you enter system operating mode b y clicking the windo w CONS0 #1<computer name> with the left mouse button. System operation When the BS2000 console window is opened, no input is permitted. If you attempt to mak e an entr y , you are[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 91 8 T r oubleshooting This chapter describes what to do out in case of malfunction. 8.1 Pr oblems with the S130 In the case of a problem with the S130, contact the service depar tment and discuss the steps to be taken. Depending on the outcome of this discussion, y ou may be required to carr y out the f ollowing tasks: – T a[...]

92 U25339-J-Z126-1-7600 Prob lems with the S130 Troubleshooting 8.1.1 Displays in the case of a har dware err or The S130 inf or ms you of hardw are errors in the f ollowing manner: ● On the S130 control panel If the yello w CHECK light illuminates, there ma y be a hardware error . At the same time, the FLA G code appears on the LCD display . Thi[...]

U25339-J-Z126-1-7600 93 Troubleshooting Problems with the S130 8.1.2 Carrying out a system dump Conditions: 1. Select the SVPST0 window 2. Select LD PROGRAM LO AD FRAME 3. Select LOAD FUNCTION => 5 (SYSTEM DUMP) The system dump stored on hard disk or cassette by the DUMP prog ram is required f or error diagnosis. Afterwards , the BS2000/VM2000 s[...]

94 U25339-J-Z126-1-7600 Prob lems with the S130 Troubleshooting List of I/O channels: IOP0 (channel processor CHP 0 and 1) channel range 00 to 7F IOP1 (channel processor CHP 2 and 3) channel range 80 to FF If the first I/O processor (IOP0) f ails , system operation is no longer possib le due to the lack of a console . If a logical console which wo[...]

U25339-J-Z126-1-7600 95 Troubleshooting Problems with the S130 Ê Once the message SHUTDOWN COMPLETED is display ed, s witch the S130 to CE mode by s witching the CE key on the inside of the maintenance panel of the S130 to the position “Maintenance Mode On”. The CE mode is indicated by the displa y CE on the control panel of the S130 (see page[...]

96 U25339-J-Z126-1-7600 Prob lems with the S130 Troubleshooting Ê Press the k ey to return to the Index F rame. Ê Select the frame A U4 by entering the frame code AU4 and press the ke y . Ê Select the IMPL function by entering 2 (IMPL activates the ne w setting) and confir m your input b y pressing the k ey . Respond to the f ollowing prompt wi[...]

U25339-J-Z126-1-7600 97 Troubleshooting Problems with the service/console processor (SKP) 8.2 Pr oblems with the service/console processor (SKP) If you ha ve problems with the SKP , contact the ser vice depar tment and discuss the steps to be taken. Depending the outcome of this discussion, you ma y be required to do the follo wing: 1. Reboot the S[...]

98 U25339-J-Z126-1-7600 Important key combinations Troubleshooting 8.3 Impor tant key combinations If your mouse is not w orking, you can use the ke ys + to move betw een the windows of the X-Windo ws window system. The f ollowing k ey combinations mak e your w ork easier : + Switch from the window system to the SINIX login screen + Retur n to the [...]

U25339-J-Z126-1-7600 99 Related publications Please apply to your local office f or order ing the manuals . [1] SINIX-2000 V7.0 Installation, Operation and Administration User Guide T ar get gr oup This manual is intended f or pr ivileged users (operators, system administr ators) of the ser vice/console processor 3970-SKP , the channel adapter 397[...]

100 U25339-J-Z126-1-7600 Related publications [4] TELESER VICE - TSB2000 (BS2000/OSD Server) User Guide T ar get gr oup The manual addresses the operating personnel of the C50, C70, C80, H100, S110, S130 and SR2000 mainframes. Kno wledge of BS2000 and basic SINIX kno wledge are required to operate TELESER VICE. Contents Ser vice technicians use TEL[...]

U25339-J-Z126-1-7600 101 Inde x A AL TER/DISPLA Y FRAME (AD) 59 AL TER/DISPLA Y FRAME (subframe) 60 A T OP 8 s witching the S130 on/off 31 authorization control 10 AU T O 8 1 A UXILIAR Y FRAME IORSF CONTROL 79 LOAD PRESET1 82 LOAD PRESET2 83 MENU 78 MENU (A U) 65 P-OFF/IMPL 80 A UXILIAR Y FRAME (A U1): REAL CLOCK 66 A UXILIAR Y FRAME (A U2): IORSF [...]

102 U25339-J-Z126-1-7600 Index D displa y hardware errors 92 hardware status 41 displa ys in line 24 41 in line 25 41 E emergencies 3 EMERGENCY ST OP switch 19 batter y cabinet 19 global storage 19 e xecuting IPL in DET AIL-1 FRAME 84 F f or m - s witching on/off the host 26 frame code 45 frame name 45 frame structure 37 G global storage control pa[...]

U25339-J-Z126-1-7600 103 Index L line 22 + 23, messages 38 line 23, messages 40 line 24, displa ys 41 line 25, displa ys 41 loading BS2000 33 loading IORSF 77 M manual IPL 84 MANU AL OPERA TION FRAME (MA) 57 manuf acturer instr uctions 4 MCU (Memor y Control Unit) 96 MCU def ective 96 MESSA GE FRAME (ME) 62 messages in line 22 + 23 38 messages in l[...]

104 U25339-J-Z126-1-7600 Index S S130 control panel 12 button functions 15 function of the indicators 12 saf ety instructions 3 SCI (System Control Interf ace) 96 SCI def ective 96 screen A UXILIAR Y FRAME IORSF CONTROL 79 LOAD PRESET1 82 LOAD PRESET2 83 MENU 78 P-OFF/IMPL 80 MODE SELECTION FRAME 47, 77 PROGRAM LO AD FRAME 85 DET AIL-1 85 DET AIL-2[...]

U25339-J-Z126-1-7600 105 Index automatically 28 by hand 21 from a remote system 32 from SKP 23 time-driven 30 using the control panel 21 system components def ective 96 system operation 7 system status messages 40 U user frames 46 s witching between 45 X X window system windo ws 34[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 107 Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Objectives and target g roup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Summar y of contents . . . . . . . . . . . . . . .[...]

108 U25339-J-Z126-1-7600 Contents 6 Standard pr ocessing in SVP mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 6.1 Inv oking an SVP frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.2 General frame structure . . . . . . . . . . . . . . . . . . . . . . . [...]

U25339-J-Z126-1-7600 109 Contents 8 T roubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 8.1 Problems with the S130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 8.1.1 Displa ys in the case of a hardware error . . . . . [...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 111 S130 Business Server Operating Manual T ar get gr oup The manual addresses privileged users (operators, system administr ators) of the S130 Business Ser ver . Contents The manual describes the hardware of the S130 Business Server insof ar as it is required f or system operation. In addition, all SVP frames are described whi[...]