Fujitsu ESPRIMO P7935 manual

Professional PC Operating Manual ESPRIMO P5635 / P5730 ESPRIMO P5731 / P7935 ESPRIMO P7936 / P99 0 0[...]

Are ther e ... ... any technical questions or problems? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: " http://ts .fujitsu.c om/supp ort/serv icedesk. h tml" ) • your sales partner • your sales of fi ce Further information can be found in the &[...]

[...]

Copyright Fujitsu T e ch nology Solutions 2009 1 1/ 09 Published by Fujitsu T echnology Solutions GmbH Mies-van -der -Rohe-Straße 8 80807 Munich, Germany Contact h ttp://ts.fuj i tsu.com/s upport All rights reserved, includi ng intellectual proper ty rights. T echnical data subj ect to modi fi cations and delivery subject to availability. Any lia[...]

ESPRIMO P5635 / P5730 ESPRIMO P5731 / P7935 ESPRIMO P7936 / P 99 0 0 Operating Manual Y our ESPRIMO 5 Ports and operating elements 7 Important notes 9 Getting started 12 Operation 22 T roubleshooting and tips 30 System expansions 35 T echnica l data 62 Index 63[...]

ESPRIMO is a registered trademark of Fu jitsu T echnology Solutions G mbH. Windows 7, Windows Vista and Windows X P are registered trademarks of Microsoft Corporation. PS/2 is a registered trademark of International Business Machines, Inc. Pentium is a registe red trademark of Intel Corporation, USA. Kensington and MicroSaver are register ed tradem[...]

Content s Contents Y o u r E S P R I M O ............................. ................... ................... ...... 5 Notational conventions .... ................... ............... .................. .......... 6 Ports and operating elemen t s ................. ............... ................... ...... 7 F r o n t ........................ .....[...]

Contents A c c e s s p r o t e c t i o n w i t h S y s t e m L o c k ......................... ................... ....... 2 9 T r o u b l e s h o o t i n g a n d t i p s ............. ............... ................... ............... 3 0 H e l p i f p r o b l e m s o c c u r .................. ............... ................... ............... [...]

Y our ESPRIMO Y our ESPRIMO Overview ... is available with various con fi guration levels w ith different hardware and softw are. Y ou can incorporate accessible drives (for example a DVD drive) as well as oth er boards. This manual tells you how to start using you r device and how to operate it in daily use. This manual applies fo r a ll con fi [...]

Y our ESPRIMO Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these wa rnings could pose a risk to h ealth, damage the device or lead to loss of data. The w arranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important informat ion for t[...]

Ports and operating elements Ports and operating elements Ports This chapter presents the individual hardware compon ents of your device. This will provide you with an overview of the ports and ope rating elements on the device. Please familiarise yourself with these components before starting to work with your d evice. Front 1 2 3 4 5 6 1 = Optica[...]

Ports a nd operating element s Rear 1 2 3 1 = Power connector for computer 2 = Power connector for monitor (device-dependent) 3 = Ports for external devices 8 Fujitsu T ech nology Solutions[...]

Important notes Important notes Impor tantnotes Notes In this chapt er you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety information Safetyinformation Note Pay attention to the information provided in the "Safety" manual and in the fo llowing s afety note s. When insta[...]

Important notes Cleaning the device Device, Transpo rtation Retransportati on Systemunit, seeDevice T urn off all power and equipment switches and disconnect the power plug from the mains outlet. Do not clean any interior parts yourse lf, leave this job to a service technician. Do n ot use any cleaning age nts that contain abrasives or may corrode [...]

Important notes CE marking CEmarking CEmarking Notes Electr omagne ticcompa tibil ity Lowvoltagedi rective The shipped version of this device c omplies with the requirements of EEC directives 2004/108/EC "Electromagnetic compatibility" and 2006 /95/EC "Low voltage directive". CE markin g for devic es with rad io componen t This [...]

Getting started Getting started Gettingstarted Please observe the safety inform ation in the "Imp ortant n otes", Pa ge 9 ch apter . Unpacking and checking the delivery It is recommended not to throw away the original packaging material! It may be required for reshipment at some later date. Packaging Contentsofdelivery Packaging, ► Unpa[...]

Getting started S e t t i n gu pt h ed e v i c e Workstation Ergonomic Device When setting up your device, please read the recommendations and safety notes in the "Safety" manual. We recomme nd that you place your device on a surface which is not slippery . In view of the many dif ferent fi nishes and varnishes used on furniture, it is p[...]

Getting started Switching on for the fi rst time: installing the software Installing, Software, Installing, Once the installation has been started the device m ust not be switched off, unless the installation has been completed. During installation, the device may o nly be rebooted when you are requested to do so! The installation w ill otherwise [...]

Getting started Switching on the device (with main powe r switch) 0 1 I 0 = Device is off I = Device i s on ► Swit ch th e device on with the main power switch (1) on the back of the device. ► Press the ON/OF F switch (2) on the front of the device.  The po wer-on indicator lights gre en an d the device is started. Fujitsu T echnology Soluti[...]

Getting started Switching on the device (without main power switch) ► Press the ON/OFF switch on the front of the device.  The power-on indicator lights green and the device is started. Installing the software ► During installation, follow the on-screen instructions. Software, Installing, ► If a nyth ing is unclear reg a rding the data you[...]

Getting started Connecting external devices Read the documentation on the extern al device before connecting it. With the exception of USB devices, always remove all power plugs before connecting external devices! Do not connect or disconnect cables during a thunderstorm. Always take hold of the a ctual plug when disconnecting a cable. Never pull t[...]

Getting started Ports on the device Ports Externa ldevices Device The ports are located on the front and ba ck of the device. Not all ports are necessarily present on your device. The standard ports are marked with t h e symb ols shown below (or similar). Detailed information on the location of the c onne ctions is provided in the manual for the ma[...]

Getting started 1 2 1 = Mainboard monitor ports 2 = Graphics card external monitor ports ► Follow the instructions co ntained in the monitor manual to prepare the monitor for operation (e.g. c onne cting cables). ► Plug the data cable into the suitable m o nitor port for the device (VGA, DVI-I, D isplayPort). The monitor power cable may only be[...]

Getting started When you connect the monitor to the monitor socket of the device, it automatically switches off as soon a s the device switches off. Connecting the mouse Depending on the equipment level selected, yo ur device will be supplied with a USB mouse or a PS/2 mouse. Mouse, Connecting, Connecting a USB mou se ► Connect the U SB mouse to [...]

Getting started ► Depending on the device, connect the data c able to the parallel port or the serial port. For an exact description of h ow to c onnect external devices to the corresponding port, please refer to the documentation of the external device. Port settings Parall elport Serialport, Y ou can change the port setting s (e.g. address, int[...]

Operation Operation Switch the device on ► If necessary , switch the monitor on (see the operating manu al for the monitor). Device, Monitor, ► Switch on the device using the main power switch located on the rear o f the device (if present). ► Press the ON/OFF switch on the front of the device.  The power-on indicator lights gr een and the[...]

Operation Switching off the device ► Shut down the operating system in a de fi ned manner . In W indows: via th e Start menu and the Turn O ff Compu ter function. Device, Monitor, ► If the operating system does not automatically switch the device into energy-saving mode or switch it of f, press the O N/O FF switch. Warning, this could lead to [...]

Operation Indicators on the d evice The indicators are on the front of the casing. Which indicators a re available on your device depends on the con fi guration level you have selected. 3 1 2 Indicator Description 1 Drive indicator The indicator lights up when the CD -ROM or DVD drive of the device is accessed. Y ou m ust never under any circumsta[...]

Operation Keyboard Keyboard Keyboard, Keyboard, Keyboard, Keyboard, Keyboard, Alphanumeric keypad Cursorkeys Keys, Func tionkeys Numerickeypad Numerickeypad The illustrated keyboard is an example an d may diff er from the model you use. 1 2 34 5 1 = Function keys 2 = On/off switch (optional) 3 = Alphanumeric keypad 4= C u r s o r k e y s 5 = Numeri[...]

Operation Start key Keys, calls up the Windows Start menu. Keys, Menu key calls up the menu for the marked ite m (Windows). Keys, Keys, Shift key enables upper-case letters and the upper key symbols to be displayed. Keys, Alt Gr key produces a character shown on t he bottom right of a key (e.g. the @ sign on the Q key). Keys, Num Loc k key By press[...]

Operation Anti-theft protection a nd lead-sealing Device, Device, Casing, Lead-sealing Anti-theftprotection KensingtonLock Chain 1 2 1 = Fixture for Kensington Lock 2 = Holes for padlock Anti-th eft protection Y ou can protect your device fr om theft • with the fi xture for th e Kensin gton Lock (1) and a Kensington MicroSaver . Consult the manu[...]

Operation Mechanical casing lock (optional) Casingmechanicallock Casing Lock Casing lock With the casing lock you can mechanically loc k the casing to prohibit unauthorised persons from opening it. The ke ys can be found on the rea r panel of your device. 2 1 Locking the casing ► Turn the ke y in the direction of the arrow (1) . Unlocking the ca [...]

Operation Access authorisation via SmartCard Securityfunctions, Acces spermission,SmartCard In systems equipped with a S martCard reader , access can be restricted to those users w h o have a corresponding SmartCard. Access protection with SystemLock Securityfunctions, Securityfun ctions, With Syste mLock , you can protect yo ur system from unautho[...]

T roubleshooti ng and tips T roubleshooting and tips Refer to the safety notes in the "Safety" manual and in the "Ge tting s tarted", Page 12 chapter when connecting or discon necting cables. If a fault occurs, t ry to correct it as des cribed in the following documentation: • in this chapter • in the documentation for the c[...]

T roubl esho oting and tips The device cannot be switched off with the ON/OFF switch. Cause Remedy The device has not bee n switched on with the ON/OFF switch. ► Press the ON/OFF sw itch again. System crash ► Keep the on/off switch pressed for at least 4 seconds until the machine switches off. Caution: This can lead to a l oss of data! This pro[...]

T roubleshooti ng and tips Cause Remedy Monitor cable not connected ► Switch off the monitor and the dev ice. ► Check that the monitor cable is properly connected to th e device and monitor . ► Switch on the m onitor and the devic e. Wrong monitor has been set under Wi ndow XP ► Restart the device. ► Press F8 while the system is booting. [...]

T roubl esho oting and tips Cause Remedy Wrong mo nitor has been set under Windows 7 ► Restart the device. ► Press F8 while the system is booting. Either the W indows Advanced Start Options menu or the menu for selecting the operating system appears. ► If the menu for selecting the ope rating system appears, press F8 . ► Select Safe Mode or[...]

T roubleshooti ng and tips Time and/or date is no t correct Cause Remedy T ime and date are incorrect. ► Set the correct time and date within the operating system you are using. or ► Set the correct time and/or date in the BIOS Setup . The lithium battery is discharged. ► If the time and date are repeatedly w rong when you switch on your devi[...]

System expansions System expansions Upgrades, Device , Systemexpansion C omponents Servicing Repairs to the device must only be carried out by quali fi ed technicians. Unauthorised opening or incorrect repair m ay greatly endanger the user (electric shock, fi re risk) and will invalidate your warranty . After consulting the Hotline/Help Desk, you[...]

System expansions Information about boards T ake care w ith the locking mechanisms (catches a nd centring pins) when you are replacing boards or components o n boards. Note that some components on th e mainboard may be very hot if the device was in use shortly before the casing w as removed. These components can be mark ed with the adjacent symbol.[...]

System expansions Opening the casing Casing, Device, ► Switch the device off. The device must not be in power-saving mode. Please observe the safety information in "Important not e s", Page 9 . Disconnect the ma ins plug from the mains outlet. Only insert the power plug after you have c losed the ca sing. ► Remove any connected wires [...]

System expansions Closing the casing ► Insert the side part in the guide rail on the lower part of the casing. Casing, D evice, 1 ► Swivel the side cover in the direction of the arrow (1) until it engages. ► O nd e v i c e sw i t hac a s i n gl o c k : L o c kt h ec a s i n g . ► Reconnect the cables that you disconnected before. 38 Fujitsu[...]

System expansions Installing the locking device w ith casing lock Removing the locking device ► Open the casing (s ee "O pening the casing ", Pa ge 37 ). ► Place the removed side part on a fl at surface with the inside facing upwards. 1 1 2 ► Press the catch in the direction of the arrow (1). ► Carefully thread the locking device[...]

System expansions Installing the locking device with casing lock 2 2 3 1 ► Turn the removed side part over (so that the outside faces upwards). ► Guide the locking device with the casing lock in the direction of t he arrow (1) in to the side part. ► Press the catch in the direction of the arrow (2) and at the same time press the locking devic[...]

System expansions Opening the drive cage ► Open the casing (s ee "O pening the casing ", Pa ge 37 ). 2 1 ► Unscrew the knurled s crew (1). ► Fold open the drive cage (2). Thanks to the integrated torque controller the drive cage will stop in any position. Fujitsu T echnology Solutions 41[...]

System expansions Closing the drive cage 2 1 ► Fold down the drive cage (1). Be careful that no wires become trapped. ► Secure the drive cag e with the knurled screw (2). ► Close the casing (see " Closing the ca sing", Page 38 ). 42 Fujitsu T echnology Solutions[...]

System expansions Removing ventilation duct Ventilationduct When removing the ventilation duct, be careful not to damage the processor cooler(s) on the mainboard. 1 2 ► Open the casing (s ee "O pening the casing ", Pa ge 37 ). ► Fold up the drive cage (see " Openin g th e dri v e ca ge", Page 41 ). ► Unhook the wires from [...]

System expansions Installing the ventilation duc t Ventilationduct When fi tting the ventilation duct, be careful not to damage the processor cooler(s) on the mainboard. 1 ► Insert the latches on t he underside of the ventilation duct into the correspon ding slots in the casing. ► Press the ventilation duct into the casing in the direction of [...]

System expansions Installing and removing a board Y ou can install additional modules in order to increase the perfo rmance of your machine. The number , position and arrangement of the board slots on the mainboard c an be fou nd in the manual for the m ainboard. Boards may already be installed o n shipment. Board, Board, Installing a board ► Ope[...]

System expansions Do not throw away the slot cover . For cooling, protection against fi re and in order to comply with EMC regulations, you must re fi t the slot cover if you remove the board. 2 1 ► Push the board into the slot (1). ► Press on the retaining clip until it you feel it engage (2). ► If necessary , connect the cables to the boa[...]

System expansions 1 2 ► Press on the curved p art of the retaining clip (1). ► Pull the board out of the slot in the direction of the arrow (2). ► Place the board in suitable packaging. For cooling, protection against fi re, and in order to comply w ith EMC (electromagnetic compatibility) regulations, you must re fi t the slot cover . 2 1 ?[...]

System expansions ► Close the casing (see "Closi ng the casing" , Pag e 3 8 ). If you have installed o r removed a PCI board, please check the relevant PCI slot settings in the BIOS Setup . If necessary , change the settings. Further information is provided in the PCI board documentation. Low-pro fi le boards Low-pro fi leboar d Y ou [...]

System expansions Removing a slot adapter 2 1 ► Unscrew the screw ( 1) and remove the slot adapter (2). Low-pro fi leboar ds, Installing and removing optional ports For further information see "Info rmation a b out boa rds", Page 3 6 . Installing and removing drives Drive Drive Drive Drive 3½inchdrive 5¼inchdrive Drive The PC casing [...]

System expansions Removing an access ible drive ► Open the casing (see " Opening the ca sing", Page 37 ). 2 1 ► Pull the data and the power supply connectors from the drive. ► Open the retaining c lip (1). ► Pull the drive out of the casing in the direction of the arrow (2). ► If necessary , make th e required se ttings on the r[...]

System expansions Installing an accessible drive ► Open the casing (s ee "O pening the casing ", Pa ge 37 ). ► If you are installing the drive in the upper bay a nd a cover (optional) is already in place, please remove it. or ► If you are installing the drive in the lower bay , break out the pre-stam ped metal panel on the drive bay[...]

System expansions Installing and removing the hard disk drive R e m o v i n gt h eh a r dd i s kd r i v e ► Open the casing (see " Opening the ca sing", Page 37 ). ► Fold up the drive cage (see " Openin g the d ri ve ca ge", Page 41 ). ► Disconnect all cables connected to the drive (data cable, power supply cable). 1 2 1 ?[...]

System expansions ► If you no longer need the EasyChange rails, secure them again at their location in th e drive cage. It may be necessary t o modify the entry for the drive in the BIO S Setup . Installing a hard disk drive ► Open the casing (s ee "O pening the casing ", Pa ge 37 ). ► Fold up the drive cage (see " Openin g th [...]

System expansions ► Secure the EasyChange rails on the side of the hard disk by inserting the upper pins of the E asyCh ange rail in the corresponding ho les of the hard disk. 1 ► Slide the hard disk drive with the EasyChange rails in the direction of the arrow (1) into the drive cage. Check that the component side of the hard d isk drive faces[...]

System expansions Installing/removing a SmartCard reader and/o r WLAN module (optional) Y ou can also install a SmartCard reader and/or a WLAN module for wireless LAN (Local Area Network) in the installation bay for the 3½ inch hard disk drive. The SmartCard reader and WLAN module can be installed together in the carrier . However , you can also i[...]

System expansions Screwing WLAN module onto carrier 2 a a 1 2 ► Push the WL AN module - with the component side facing downwa rds - in the direction of the arrow (1) into the guide (a). ► Fasten the WLAN module w ith the screws (2). Screw the SmartC ard r eader onto the carrie r 2 2 a a 1 ► Push the SmartCard reader - with the component side [...]

System expansions Installing Sm artCard reader and/or W LAN modul e 1 2 ► Push the ho lder into the PC in the direction of th e a rrow (1). ► Fasten the holder w ith the screws ( 2). ► Connect the data cable connectors to th e hol der . M ake sure the polarity is correct. ► Close the casin g (se e " Closing the ca sing", Page 38 )[...]

System expansions Removing SmartCard reader and/or WLAN module ► Open the casing (see " Opening the ca sing", Page 37 ). ► Pull the d ata cable connectors from the carrier . 2 1 ► Remove the screws (1 ). ► Slide the carrier out of the casing in the direction of the arrow (2). ► Close the casing (see " Closing the ca sing&qu[...]

System expansions Removing WLAN module from carrier 1 1 ► Undo the screws (1). ► Pull the WLAN module out of the holder in the direction of the arrow. Installing USB port s on the rear panel Depending on your device c on fi guration, an installation slot for USB interfaces is provided on the back of the casing. As a result, no boa rd slot is o[...]

System expansions Mainboard expansions Details on how to upgrade the main memory or the processor of your device can be found in the manual for the mainboard. Upgrades Lith iumb attery Processor Mainmemory M ai nboard Upgrading main memory ► Open the casing (see " Opening the ca sing", Page 37 ). Mainmemory, ► Fold up the drive cage ([...]

System expansions Replacing the lithium battery In order to permanently save the system information, a lithium battery is installed to provide the CMOS-memory with a c urrent. A corresponding error message noti fi es the user when the charge is too low or the battery is empty . The lithium battery must then be replaced. For 0-W att devices: As an [...]

T echnical data T echnical data Electrical data Safety standards complied with: IEC 60950-1, EN 60950-1, UL 60950 CSA 22.2 No.60950-1 Protection class: I Rated voltage range 100 V – 240 V Rated frequency 5 0H z–6 0H z Max. rated current (Casing with monitor s ocket): 100 V – 127 V / 6.5 A 200 V – 240 V / 3.5 A Max. rated current Monitor soc[...]

Index Index 3½ inch drive 45 5¼ inch drive 45 A Access permission, SmartCard 25 Alphanumeric keypad 21 Anti-theft protection 23 Audio input 14 Audio output 14 B Battery 57 BIOS Setup 22 security functions 24 BIOS Setup, con fi guration 22 settings 22 system settings 22 Board installing 41 removing 42 Board, installing 41 removing 41 Button, ON/O[...]

Index F Function keys 21 G Getting started 8 H Headphones 14 I Important notes 5 Installing, software 10, 12 switching on for the fi rst time 10 K Kensington Lock 23 Keyboard 21 Keyboard port 14 keyboard shortcuts 22 Keyboard shortcuts 21 Keyboard, alphanumeric keypad 21 connecting 16 cursor k eys 21 function keys 21 numeric keypad 21 port 16 Keys[...]

Index Processor 56 Property protection 22 PS/2 mouse po rt 14 PS/2 mouse, connecting 16 port 16 R Recycling 6 Replacing, lithium battery 57 Replacing, lithium battery 57 Retransportation 5–6 S Safety information 5 Security func tio ns BIOS Setup 24 Security functions, SmartCard 25 SystemLock 25 Security measures 22 Serial port 14, 16 Connecting d[...]