Fujitsu PDS4241W manual

Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily . * Installation and removal require special exper tise. Consult y[...]

DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A v enue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole r esponsibility that the pr oduct, T ype: 42” PLASMA DISPLA Y Mode[...]

DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A v enue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Y amagata Japan declar es under our sole r esponsibility that the pr oduct, T ype: 42” PLASMA DISPLA Y Mode[...]

E-2 SAFET Y PRECA UTIONS FCC NOTICE • PDS4241W : A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital de vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial en [...]

E-3 English – When the product is used on a cart, care should be taken to a void quick stops, excessi ve force, and unev en surfaces which may cause the product and cart to ov erturn, damaging equipment or causing possible injury to the operator . – Slots and openings in the cabinet are provided for v entilation. These ensure reliable operation[...]

E-4 FEA TURES This display uses a plasma display panel and is only 8.5 cm deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. V ar iety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as D VD and HDTV . • The d[...]

E-5 English ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. One remote control T wo AA batteries One user ’ s manual CHECKING ACCESSORIES One power cable HAND Y TIPS • Pictures may become “ burnt ” into the screen phosphors if the [...]

E-6 INS T ALLA TION T o prevent the display ’ s internal components from o verheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display . Also, be also sure that your dealer performs the installation. See the appropriate instr[...]

E-7 English PAR T NAMES AND FUNCTIONS Fr ont 1 P ower indicat or lamp This lamp shows the state of the po wer supply . Lit (red): Stand-by Lit (green): Po wer ON Lit (orange): Power sa ving (DPMS: Power sa ving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P . E-44 for more information.[...]

E-8 1 Exter nal speak er output ter minal (EXT SP) Connect this terminal to the optionally av ailable speaker . (Use a speaker with 4 to 16 Ω .) *See the speaker instruction manual for more information. 2 Sound 1 input ter minal (A UDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. 3 Sound 2 input ter minal (A UDIO[...]

E-9 English Descr iption of Input T er minals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horizontal sync hronization 6 Ground 1 4 V er tical sync hronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No.[...]

E-10 PAR T NAMES AND FUNCTIONS (Continued) 1 Power ON button [POWER ON] ➝ (See P . E-14.) T urns the power ON. 2 Power OFF button [POWER OFF] ➝ (See P . E-14.) T urns the power OFF . 3 RGB input mode selector button [RGB] ➝ (See P . E-15.) Switches between RGB input modes. 4 Video input mode select or butt on [VIDEO] ➝ (See P . E-15.) Switc[...]

E-11 English PRECA UTIONS T o prevent malfunction, be sure not to apply an y form of severe shock to the remote control. T o prevent malfunction or deformation, be sure not to allo w the remote control to become wet; also, keep it away from hot locat ions or heating equipment. Be sure not to clean the remote control using a cloth dampened in any v [...]

E-12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPT A CLE Make sure that the po wer cable ’ s grounding wi[...]

E-13 English Connection to PC Connection to A V equipment PO WER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C T o sound output terminal T o RS-232C output terminal T o display (digital RGB) output terminal T o S-video output termi[...]

E-14 Pr ess the main power switc h at the bot tom of the displa y . When you do so, the main power turns ON. Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green. Pr ess or to select a desir ed input mode. BA SIC OPERA TIONS * Y ou can also use the switches on the display ’ s control panel to accomplish these steps[...]

E-15 English SELECTING INPUT MODE Pr ess to select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal. Comp.video : Displays pictures from equip[...]

E-16 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display . Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or [...]

E-17 English Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.e., a 4:3 aspect ratio). SCREEN SIZE ASPECT RA TIO The followi[...]

E-18 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears. The corresponding menu screen will appear . Pr ess or t o select an option[...]

E-19 English : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (for V ideo, S-video, Comp.video) (4) T int (for V ideo, S-video, Comp.video) (5) Sharpness (6) Gamma (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.video) Function Adjusts pictur[...]

E-20 USING THE FEA TURES MENUS • FEA TURES setup scr een has 5 options of A djustment, Function, On Scr een, Input T erminal and Others. • Options with “ ” on the right When you select an option with “ ” , press . The adjustment/setup screen for that option appears.(See P . E-30 – E-38.) Y ou can use or on this screen to make selectio[...]

E-21 English Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching. Range On (Movie) / Off (Normal) On (3D Y/C circuit) / Off (3-line) Function Menu(See P . E-30, E-3[...]

E-22 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) DPMS (2) Audio Input (3) Screen Orbiter (for RGB) Function Specifies time before DPMS starts. Can specify the background color when specifying time. Selects audio input terminal. Sets up screen orbiter . Operation Display DPMS screen and press or to select an option. Use or for [...]

E-23 English Function Specifies input mode of highest priority . Selects display number . Selects input signal. Specifies and displays type of input signal directly . Sets up to display white over the entire screen. Sets up Exhibition mode. Sets up whether horizontal or vertical installation. Locks the main unit button. Displays system operation st[...]

E-24 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or t o select “ Tint ” . Pr ess . The “ Ti n t ” adjustment screen will appear . Pr ess[...]

E-25 English • Adjusting Contrast (Contr ast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lower contrast Press to store. • Adjusting Screen Br ightness (Br ightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store. • Adjusting Color Dar kness (Color) Any v alue between -[...]

E-26 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear . Pr ess or t o select “ P osition ” . Pr ess . The “ Position ?[...]

E-27 English Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -2 to +2 RGB mode RGB-PC: -150 to +150 Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -12 to +25 Decoder: -2 to +2 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input mode[...]

E-28 AD JUS TING A UDIO (A UDIO MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ AUDIO ” . Each time you press or , one of the av ailable menus appears in the following sequence: The A UDIO Menu screen will appear . Pr ess or t o select “ Balance ” . Pr ess . The “ Balance ” adjustment screen will appear . Pr ess[...]

E-29 English A djusting T reble (T r eble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble A djusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass A djusting V olume Balance (Balance) Each audio input Any v alue between -10 and +10 can be [...]

E-30 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess or t o select "On Screen Menu". • Select a desired option for adjustment/setup[...]

E-31 English • FEA TURES setup scr een has the follo wing 5 options. Adjustment : Can make a f ine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . E-32.) On Screen Menu : Can make a display setting such as OSD, Language. (See P . E-32.) Input T erminal : Can [...]

E-32 • Setting Displa y Infor mation (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you mak e for this option.) Each time you press or , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.[...]

E-33 English * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Selecting Video Mode (Video Input) Y ou can use this option to select the d[...]

E-34 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receiv e to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears. (2) Select the signal system to recei ve. Each time you press or , one o[...]

E-35 English • Selecting input ter minals (A udio Input) All modes Y ou can use this option to select one of the two av ailable terminals to receive sound from input equipment. (1) Select “ Audio Input ” and press . The “ Audio Input ” selection screen will appear . (2) Press or to select input equipment. (3) Select a desired input termin[...]

E-36 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) • Input mode of pr iority (Input Pr ior ity) All modes Y ou can use this option to switch between modes only when a signal is receiv ed through the selected input mode terminal. Y ou cannot switch the input mode. Each time you press or , one of the available choices appears in the follo wing [...]

E-37 English * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Setting R GB Input Signal Compulsorily (Dir ect Setting) Y ou can use this [...]

E-38 OTHER AD JUS TMENTS (FEA TURES MENU)(C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Setting Exhibition Mode (Exhibitio[...]

E-39 English INITIALIZA TION OF USER AD JUSTMENT V ALUE(F A CT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or to select “ F A CT OR Y DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess . • Displays the message of whether t[...]

E-40 OPTIONS W all-mounting unit V ertical: 0 ° to 5 ° mounting angle P-42WB12 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (v ariable) P-42CT11 Stand P-42TT29 Speaker P-42SP11 (1 set of 2 speakers) Speaker Stand P-42ST11 (1 set of 2 speakers stands) * When installing an opt[...]

E-41 English FA CT OR Y SET TINGS This display can store the latest four types of signals for RGB adjustment v alue. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P . E-26 – E-27 to adjust the pa[...]

E-42 Model PDS4241W/PDS4242W Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.8 kg / 63.5 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm / 40.7 (W) x 25.2 (H) x 3.3 (D) inch Power supply 100 – 240 V AC 50/60 Hz Current rat[...]

E-43 English Regulation --- PDS4241W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1998, Class A EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996[...]

E-44 Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.Special setup may hav e been made. Return [...]

1116, Suenaga, T akatsu-ku, Kawasaki 213-8502, J apan Printed in J apan 81 131220 15[...]