Garmin 521s manual

GPSMAP ® 400/500 series owner ’ s manual[...]

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other el[...]

GPSMAP 400/500 Series Owner ’s Manual i Introduction Introduction This manual includes information for the following products: GPSMAP ® 421/421s GPSMAP 451/451s GPSMAP 521/521s GPSMAP 526/526s GPSMAP 551/551s GPSMAP 556/556s T ips and Shortcuts • Press  from any screen to return to the Home screen. • Press  from any o[...]

ii GPSMAP 400/500 Series Owner ’s Manual Introduction T able of Contents Introduction ����������������������������������������������������������������������������� i T ips and Shortcuts ��?[...]

GPSMAP 400/500 Series Owner ’s Manual iii Introduction Conguring the Chartplotter ���������������������������������������������� 48 Viewing System Information �������������������������������?[...]

iv GPSMAP 400/500 Series Owner ’s Manual Introduction See the Important Safety and Pr oduct Information guide in the product box for product warnings and other important information. Hg       [...]

GPSMAP 400/500 Series Owner ’s Manual 1 Getting Started Getting Started Unit Overview POWER/ BACKLIGHT MENU ROCKER SELECT HOME RANGE (-/+) MARK SD card slot GPSMAP 526 shown GPSMAP 421/451/ 521/551 GPSMAP 526/556 Power/Data External GPS antenna NMEA 2000 ® Power/Data External GPS antenna NMEA 2000[...]

2 GPSMAP 400/500 Series Owner’s Manual Getting Started T urning the Unit On or Off T o turn on the unit, press and release the  key . When the W arning screen appears, select   to view the Home screen.  : The rst time you turn on your unit, you must congure the initial settings. See “Initial[...]

GPSMAP 400/500 Series Owner ’s Manual 3 Getting Started  —set the time zone you want displayed for time readings. If  is selected for the T ime Zone, the DST option is not available and is automatically set to  .  —specify units for on-screen measurements a[...]

4 GPSMAP 400/500 Series Owner’s Manual Getting Started T o switch between Day and Night mode: 1� Press and release the Power key � 2� Select Color Mode � 3� Press left or right on the Rocker to switch between modes� Using the Keypad POWER/ BACKLIGHT MENU ROCKER SELECT HOME RANGE (-/+) MARK [...]

GPSMAP 400/500 Series Owner ’s Manual 5 Getting Started  —Press to access additional settings and conguration options. Press to return to the previous screen when indicated. Acquiring GPS Satellite Signals When you turn on the unit, the GPS receiver must collect satellite data and establish the current location. When the unit acq[...]

6 GPSMAP 400/500 Series Owner’s Manual Getting Started  : If you use an SD card to transfer waypoints from MapSource ® or HomePort ™ , update to the most-current version by clicking  >    , or check the Garmin W eb site at www .garmin.com . Un[...]

GPSMAP 400/500 Series Owner ’s Manual 7 Using Charts Using Charts Y our chartplotter has a worldwide basemap or BlueChart g2 cartography for either the USA shoreline or a specic country . •  —displays all relevant navigation data available on your preloaded maps, including buoys, lights, cabl[...]

8 GPSMAP 400/500 Series Owner’s Manual Using Charts Light Beacon Exposed wreck Y our boat Marina services Exposed rock Tide station Zoom scale Navigation Chart with g2 Vision Navigation Chart Menu T o access additional settings or options for the Navigation chart, press  .  —view the Navi[...]

GPSMAP 400/500 Series Owner ’s Manual 9 Using Charts •  —turn the GPS Speed, GPS Heading, Depth, and GPS Position data bar on or off. Select   to congure the data shown on the screen. •  —turn the Distance to Destination, Arrival, Off Course[...]

10 GPSMAP 400/500 Series Owner ’s Manual Using Charts Other features common to most charts include depth contour lines (with deep water represented in white), intertidal zones, spot soundings (as depicted on the original paper chart), navigational aids and symbols, and obstructions and cable areas. Navigating to a Point on the Chart 1� From the[...]

GPSMAP 400/500 Series Owner ’s Manual 1 1 Using Charts Accessing Additional Object Information Use the map pointer ( ) to view information about on-screen map items, waypoints, and charts. T o access additional object information: 1� On the Navigation chart, highlight an item with the map pointer , and press SELECT � Selected item 2� Select[...]

12 GPSMAP 400/500 Series Owner ’s Manual Using Charts  —displays a compass rose around your boat, indicating compass direction. T rue wind direction or apparent wind direction displays if the unit is connected to a compatible marine wind sensor . Wind direction indicator Compass rose Changing the Chart Appearance From the Home sc[...]

GPSMAP 400/500 Series Owner ’s Manual 13 Using Charts  —draws an extension line from the bow of the boat in the direction of travel. •  —turns the heading line off. •  —sets the distance to the end of the heading line. •  —sets the amount of time until [...]

14 GPSMAP 400/500 Series Owner ’s Manual Using Charts Using the Split Navigation Chart Use the Split Navigation chart to view two different zoom levels of the Navigation chart at the same time. Split Navigation Chart (with a BlueChart g2 Vision card) The top half of the screen is zoomed in 10 times closer than the bottom half of the screen. The ?[...]

GPSMAP 400/500 Series Owner ’s Manual 15 Using Charts •   —view , sort, or lter existing waypoints, or create new ones. •   —create and edit a new waypoint. •   —manage tracks ( page 28 ). •   [...]

16 GPSMAP 400/500 Series Owner ’s Manual Using Charts T o view details about navaids such as beacons, lights, and obstructions: 1� Use the Rocker to point to the navaid� When the cursor is over the navaid, the navaid is highlighted� 2� Press SELECT to view details about the navaid� Mariner ’ s Eye 3D Settings T o access additional set[...]

GPSMAP 400/500 Series Owner ’s Manual 17 Using Charts   —adjusts the width of the course line drawn when navigating. This setting also af fects routes   , but does not affect automatic guidance    . Using Fish Eye 3D Using the depth contour lines of [...]

18 GPSMAP 400/500 Series Owner ’s Manual Using Charts The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 V ision SD card, and is best for offshore deep-sea shing. From the Home screen, select Charts > Fishing Chart � T o access additional settings or options from the Fishing chart, press MENU � [...]

GPSMAP 400/500 Series Owner ’s Manual 19 Using Charts  : When enabled, the high-resolution satellite images are only present at lower zoom levels. If you cannot see the high-resolution images in your BlueChart g2 V ision region, either zoom in further using the   key , or set the detail level higher ( page 1[...]

20 GPSMAP 400/500 Series Owner ’s Manual Using Charts T o access aerial photos from the Navigation chart: Use the Rocker to highlight a camera icon with the pointer , and select Aerial Photo or Review � Perspective Overhead Animated T ide and Current Indicators Y ou can view indicators for animated tide station and current direction on the Navi[...]

GPSMAP 400/500 Series Owner ’s Manual 21 Using Charts Current direction indicators appear as arrows on the chart. The direction of each arrow indicates the direction of the current at a specic location on the chart. The color of the current arrow indicates the range of speed for the current at that location. When you move the cursor over the c[...]

22 GPSMAP 400/500 Series Owner ’s Manual Using Charts Using the Chart/Sonar Screen  : The Chart/Sonar screen, like the Sonar screen, is only available when using a sonar capable unit with a transducer attached. Use the Chart/Sonar screen to view the Navigation chart, Fishing chart, Mariner ’ s Eye 3D, or Fish Eye 3D and sonar at the[...]

GPSMAP 400/500 Series Owner ’s Manual 23 Where T o? Where T o? Use the    option on the Home screen to search for , and navigate to, waypoints, routes, tracks, and services such as nearby fuel, repairs, and ramps.  : Y ou must create waypoints and routes before you can navigate to them. Y ou can navigate [...]

24 GPSMAP 400/500 Series Owner ’s Manual Where T o? 3� Select a destination�  : Press the right or left arrow to view additional information or to display the location on a chart. 4� Select Navigate T o � 5� Select Go T o � OR Select Guide T o when using a preprogrammed BlueChart g2 Vision card to use Automatic Guidance�[...]

GPSMAP 400/500 Series Owner ’s Manual 25 Where T o? Creating and Using W aypoints Y ou can store up to 3,000 waypoints with a user-dened name, symbol, depth, water temperature, and comment for each waypoint. T o create a new waypoint: 1� From the Home screen, select Charts > Navigation Chart > MENU > W aypoints & T racks > Ne[...]

26 GPSMAP 400/500 Series Owner ’s Manual Where T o? T o view waypoint information on the Navigation chart: 1� From the Navigation chart, use the map pointer ( ) to highlight the waypoint on the Navigation chart and press SELECT � 2� Select an option� • Select Review or the name of the waypoint to view details of objects in the vicinity [...]

GPSMAP 400/500 Series Owner ’s Manual 27 Where T o? 4� Press SELECT � Repeat this step to add additional turns� 5� Press MENU to cancel, to undo the last turn, or to begin navigating the route� T o create a route in another location: 1� From the Home screen, select Information > User Data > Routes > New Route � 2� Select [...]

28 GPSMAP 400/500 Series Owner ’s Manual Where T o? T o delete a route: 1� From the Home screen, select Information > User Data > Routes � 2� Select the route to delete� 3� Select Delete > OK � If the route has been saved, you are prompted to “Delete all unused route waypoints?” Unused waypoints are waypoints on the route[...]

GPSMAP 400/500 Series Owner ’s Manual 29 Where T o? T o clear the active track: From the Navigation or Perspective 3D chart, select MENU > W aypoints & T racks > Active T racks > Clear Active T rack � The track memory is cleared� The current track continues to be recorded� T o retrace the active track: 1� From the Navigation [...]

30 GPSMAP 400/500 Series Owner ’s Manual Where T o? Using BlueChart g2 V ision NOTICE BlueChart g2 V ision data cards are not waterproof. When you are not using the card, keep it in the original packaging for safekeeping and store it away from exposure to sun and rain to prevent damage to the card. BlueChart g2 V ision data cards are susceptible [...]

GPSMAP 400/500 Series Owner ’s Manual 31 Viewing Information V iewing Information Use the Information screen to access information about dashboard gauges, tides, currents, user data, and other vessels. V iewing a Compass From the Home screen, select Information > Dashboard > Compass � V iewing Numbers Y ou can view and customize numerical[...]

32 GPSMAP 400/500 Series Owner ’s Manual Viewing Information 3� Select the number of elds to show (3, 4, 5, or 6)� 4� Select information to show in each eld� Select a eld to view additional information that can be shown or select Change Page and press the Range (-/+) keys to view additional elds� V iewing T rip Information F[...]

GPSMAP 400/500 Series Owner ’s Manual 33 Viewing Information From the Home screen, select Information > Dashboard > Engine � Cycling Through Engine Gauge Screens 1� From the Home screen, select Information > Dashboard > Engine � 2� Select the left and right arrows on the Rocker to move from one gauge screen to the next� Cust[...]

34 GPSMAP 400/500 Series Owner ’s Manual Viewing Information Selecting the Number of Engines Shown in Gauges The engine gauges can show information for up to four engines. 1� From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Engine Selection > Num� Engines � 2� Select the number of engi[...]

GPSMAP 400/500 Series Owner ’s Manual 35 Viewing Information From the Home screen, select Information > Dashboard > Engine > MENU > Gauge Setup > Fuel Display � • Use T otal Fuel Level —select to display a numeric value for the total fuel level� • Use Fuel T ank Levels > Num� T anks —select to display a graphical r[...]

36 GPSMAP 400/500 Series Owner ’s Manual Viewing Information V iewing and Customizing Wind Gauges From the Home screen, select  >  >  . Wind gauge Compass Close hauled wind gauge Selecting T rue, Apparent, or Ground Wind for the Wind Gauges The chartplotter must b[...]

GPSMAP 400/500 Series Owner ’s Manual 37 Viewing Information Conguring the Heading Source Y ou can specify the source of the heading displayed on the wind gauge. Magnetic heading is the heading data received from a heading (or magnetic) sensor , and GPS heading data is calculated by your chartplotter GPS. From the Home screen, select [...]

38 GPSMAP 400/500 Series Owner ’s Manual Viewing Information V iewing Current Information Use the Current Prediction screen to view information for currents.  : Y ou must use a BlueChart g2 V ision card to view Current- station information. 1� Select Information > Tides & Currents > Currents � 2� Select a current stati[...]

GPSMAP 400/500 Series Owner ’s Manual 39 Viewing Information Viewing Celestial Information for a Different Date Y ou can select a date and time for which to view celestial information, and you can view the moon phase for the selected date and time. 1� From the Home screen, select Information > Celestial > Date � 2� Change the date to [...]

40 GPSMAP 400/500 Series Owner ’s Manual Viewing Information T o transfer data (waypoints, routes, tracks) to an SD card: 1� Insert an SD card into the SD card slot on the front of the unit� 2� From the Home screen, select Information > User Data > Data T ransfer > Save T o Card � 3� Complete one of the following: • Select th[...]

GPSMAP 400/500 Series Owner ’s Manual 41 Viewing Information 3� Complete one of the following: • Select the le name from the list� • Select Add New File to create a new le� Enter the le name using the Rocker , and press Select � 4� Remove the SD card from the unit, and insert it into an SD card reader attached to a computer[...]

42 GPSMAP 400/500 Series Owner ’s Manual Viewing Information About AIS AIS alerts you to area trafc. When connected to an external AIS device, the chartplotter can show some AIS information about other vessels that are within range, that are equipped with a transponder , and that are actively transmitting AIS information. The information repor[...]

GPSMAP 400/500 Series Owner ’s Manual 43 Viewing Information T arget is activated� The target appears larger on the chart� A green line attached to the target indicates the heading of the target� The MMSI, speed, and direction of the vessel appear beneath the target, if the details setting is set to Show ( page 45 )� If the AIS transmissi[...]

44 GPSMAP 400/500 Series Owner ’s Manual Viewing Information the projected course line. When course over ground, heading, and rate-of-turn information are provided by an activated AIS target, the projected course of the target is calculated based on the course over ground and the rate-of- turn information. The direction in which the tar get is tu[...]

GPSMAP 400/500 Series Owner ’s Manual 45 Viewing Information Showing AIS V essels on a Chart or on a 3D Chart View AIS requires the use of an external AIS device and active transponder signals from other vessels. Y ou can congure how other vessels appear on a chart or on a 3D chart view . The display range congured for one chart or one 3D c[...]

46 GPSMAP 400/500 Series Owner ’s Manual Viewing Information 2� Select Navigation Chart , Fishing Chart , Perspective 3D , or Mariner ’ s Eye 3D � 3� Use the Rocker to select an AIS vessel� Press SELECT � 4� Select AIS V essel � Deactivating a T arget for an AIS V essel  : Mariner ’ s Eye 3D charts are available only[...]

GPSMAP 400/500 Series Owner ’s Manual 47 Viewing Information The AIS target list shows information about all of the boats your unit is monitoring. The AIS list shows the MMSIs or (if the boat is broadcasting it) names of the AIS boats and is sorted by range. The boat nearest to your boat appears at the top of the list. 1� From the Home screen, [...]

48 GPSMAP 400/500 Series Owner ’s Manual Conguring the Chartplotter Conguring the Chartplotter Use the Congure screen to congure unit settings. V iewing System Information Y ou can view the software version, the basemap version, supplemental map information (if applicable), and the unit ID number for your chartplotter . Y ou may need [...]

GPSMAP 400/500 Series Owner ’s Manual 49 Conguring the Chartplotter Conguring Units of Measure T o change units of measure from the Home screen, select Congure > Preferences > Units �  —a global setting that denes individual units of measure at the same time: [...]

50 GPSMAP 400/500 Series Owner ’s Manual Conguring the Chartplotter Conguring Navigation Preferences T o change navigation preferences, from the Home screen, select Congure > Preferences > Navigation �  —for saved routes, this determines whether route turns are indicated by number (T urn 1, T[...]

GPSMAP 400/500 Series Owner ’s Manual 51 Conguring the Chartplotter • If the placement of the Auto Guidance line is satisfactory , select MENU > Navigation Options > Stop Navigation � Proceed to step 1 1� • If the Auto Guidance line is too close to known obstacles, from the Home screen, select Congure > Preferences > Nav[...]

52 GPSMAP 400/500 Series Owner ’s Manual Conguring the Chartplotter  (if supported)—congures the input/output format for serial port 2 to use when connecting your chartplotter to external NMEA devices, a computer , or other Garmin devices.   —enable or d[...]

GPSMAP 400/500 Series Owner ’s Manual 53 Conguring the Chartplotter 2� Select the type of tank you want to label� 3� Select Choose Names � 4� Select a tank� 3� Select the location of the tank: Port (P) , Center (C) , Starboard (S) , Fore (F) , or Aft (A) � 4� Select the label you want to use for the tank� Setting Alarms Y o[...]

54 GPSMAP 400/500 Series Owner ’s Manual Conguring the Chartplotter  —set an alarm to sound when the battery reaches a specied low voltage.   —set an alarm to sound when the GPS location accuracy falls outside the specied value. Setting Sonar Alarms T o set a sonar alarm from t[...]

GPSMAP 400/500 Series Owner ’s Manual 55 Conguring the Chartplotter Conguring My Boat T o congure settings for your boat, from the Home screen, select Congure > My Boat �  —offset the surface reading for the depth of a keel, making it possible to measure depth from the bottom of the keel instead[...]

56 GPSMAP 400/500 Series Owner ’s Manual Conguring the Chartplotter  —enter the total fuel capacity of your boat. Conguring Other V essels T o congure settings for boats other than your own, from the Home screen, select Congure > Other V essels �  : T o congure AIS or DSC in[...]

GPSMAP 400/500 Series Owner ’s Manual 57 Using Sonar Using Sonar When connected to a transducer , the following chartplotters can be used as shnders: GPSMAP 421s GPSMAP 451s GPSMAP 521s GPSMAP 526s GPSMAP 551s GPSMAP 556s Understanding the Full Screen Select the Full Screen option to view a full-screen graph of the transducer ’ s sonar re[...]

58 GPSMAP 400/500 Series Owner ’s Manual Using Sonar Understanding the Split Frequency Screen Use the Split Frequency screen (dual-frequency transducer only) to view both the 50 kHz and the 200 kHz frequencies on the same screen. A 50 kHz frequency graph appears on the left. A 200 kHz frequency graph appears on the right. From the Home screen, se[...]

GPSMAP 400/500 Series Owner ’s Manual 59 Using Sonar Understanding the Depth Log Screen The Depth Log screen keeps a graphic log of temperature readings over time. The present depth is shown in the top-left corner . From the Home screen, select Sonar > T emp Log � Press  to set the duration and the scale for the log. Depth range [...]

60 GPSMAP 400/500 Series Owner ’s Manual Using Sonar Setting Up Sonar Use the Sonar Setup screen to dene and adjust settings universal to all sonar screens. From the Home screen, select  >  .  —adjust the rate at which the sonar scrolls from right to left [...]

GPSMAP 400/500 Series Owner ’s Manual 61 Using Sonar ◦  —many strong returns are highlighted in white. ◦  —the least-sensitive setting. Only the strongest returns are highlighted in white.  —select  or  . This affects the background on all sonar sc[...]

62 GPSMAP 400/500 Series Owner ’s Manual Digital Selective Calling Digital Selective Calling (DSC) Using the Chartplotter with a VHF Radio The following table indicates the features that are available when you connect your chartplotter to a VHF radio over a NMEA 0183 network or a NMEA 2000 network. Feature NMEA 0183 VHF Radio NMEA 2000 VHF Radio [...]

GPSMAP 400/500 Series Owner ’s Manual 63 Digital Selective Calling T o turn DSC on or off: 1� Select Congure > Other V essels � 2� Select DSC to toggle it on or off� Adding a DSC Contact Y ou can make calls to a DSC contact from the chartplotter . See page 65 for information on making an individual routine call. 1� While viewing a[...]

64 GPSMAP 400/500 Series Owner ’s Manual Digital Selective Calling Man-Overboard Distress Calls Initiated from a VHF Radio When your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio and you initiate a man-overboard DSC distress call from your radio, your Garmin chartplotter displays the man-overboard screen and prompts you [...]

GPSMAP 400/500 Series Owner ’s Manual 65 Digital Selective Calling • Select Navigate T o to Go T o or Route T o the location sent with the position report ( page 10 )� Conguring V essel T rails on the Navigation Chart If you have your chartplotter congured to show trails, the Navigation chart displays a black dot for each reported posit[...]

66 GPSMAP 400/500 Series Owner ’s Manual Digital Selective Calling T o make an individual routine call: 1� While viewing a chart, press MENU > Other V essels > DSC > DSC List � 2� Select the station to call from the list� 3� Select Review > Call with Radio � 4� Select Send to send the information about the call to the ra[...]

GPSMAP 400/500 Series Owner ’s Manual 67 Appendix Appendix Specications Physical Specications   W × H × D: 5.7 in. × 5.0 in. × 3.0 in. (14.5 cm × 12.7 cm × 7.6 cm)  W × H × D: 5.9 in. × 6.4 in. × 2.9 in. (15.0 cm × 16.3 cm × 7.4 cm)  [...]

68 GPSMAP 400/500 Series Owner ’s Manual Appendix   (A verage acquisition times for a stationary receiver with a clear view of the sky) GPSMAP 421/421s GPSMAP 451/451s GPSMAP 521/521s GPSMAP 551/551s W arm*: Approximately 1 second Cold**: Approximately 38 seconds GPSMAP 526/526s GPSMAP 556/556[...]

GPSMAP 400/500 Series Owner ’s Manual 69 Appendix Alarms and Messages The unit uses an on-screen message system to alert you to unit operating characteristics. When a message appears, press   to acknowledge the message.   —the GPS accuracy has fallen outside of the user- set value. [...]

70 GPSMAP 400/500 Series Owner ’s Manual Appendix  —shows the MMSI or name associated with an MMSI.  —internal problem with the unit. Contact your dealer or Garmin Product Support to have the unit servic[...]

GPSMAP 400/500 Series Owner ’s Manual 71 Appendix   —no additional route waypoints can be saved.    —the Shallow W ater Alarm depth has been reached. ?[...]

72 GPSMAP 400/500 Series Owner ’s Manual Appendix    —you entered a waypoint name that already exists in memory . Modify the waypoint name or delete the existing waypoint.   —you have saved the maximum number of way[...]

GPSMAP 400/500 Series Owner ’s Manual 73 Appendix Honda Engine ECO Symbol The symbol appears when boats with NMEA 2000-compatible Honda engines are running in a fuel-efcient mode and engine RPM is displayed. Consult your Honda engine manual to determine if the engine is NMEA 2000 compatible. NMEA 2000 The following GPSMAP 400 and GPSMAP 500 se[...]

Index 74 GPSMAP 400/500 Series Owner ’s Manual Index A A-scope 60 Active T racks 15 aerial photos 19 AIS 41, 42, 56, 66 targeting symbols 42 threats 43 AIS Alarm 56 alarms 53, 69–72 AIS 56 anchor drag 53 battery 54 clock 53 collision 56 deep water 54 engine gauge 33 sh 54 fuel 54 GPS accuracy 54 navigation 53 off course 53 safe-zone 56 shall[...]

Index GPSMAP 400/500 Series Owner ’s Manual 75 Fishing 9 shing chart 17 Fish Symbols 17, 60 frequency 61 Fuel Capacity 56 fuel gauge 35 full screen, sonar 57 fuse 68 G gain 61 Garmin Data T ransfer 51 go to 23 GPS 5, 48, 68 GPS heading 37 Grid (North) 49 grid coordinates creating waypoints using 25 ground wind 36 guide to 23 H Hazard Colors 16[...]

Index 76 GPSMAP 400/500 Series Owner ’s Manual route to 23 S safe-zone settings 56 Safe Depth 16, 50 Safe Height 50 Safety Shading 13 sailing data bar 9 SAR T 42 satellite imagery enabling 18 Saved T racks 15 Save T o Card 40, 48 screenshots 72 scroll speed 60 SD cards inserting 5 removing 5 SELECT key 4 Serial Port setup 51 Service Points 1 1 se[...]

Index GPSMAP 400/500 Series Owner ’s Manual 77 4x 61 manual 61 split 61[...]

For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www �garmin�com � © 2010–2012 Garmin Ltd� or its subsidiaries Garmin International, Inc� 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd� Liberty House, Hounsdown Business Park, So[...]