GarrettCom 6K16V manual

i www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 213 Hammond Ave. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.GarrettCom .com email support@garrettc om.com Magnum 6K16V Managed Fiber Switch Hardware Installation and User Guide[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Magnum  6K16V Managed Fiber Switch Hardware Installation and User Guide Part #: 84-00125 (Rev. A) Trademarks Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registered trademark of Underwriters Laboratories GarrettCom, Magnum [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 213 Hammond Ave. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.GarrettCom .com email support@garrettcom.com Federal C[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Table of Conten ts ................................................................................. Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Speci fications ...........................................[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 5.0 Introduction - Magnum 6K16V Managed Fiber Switch PM ........... 37 5.1 Inspecting the Package and Product .................................................. 37 5.2 6KPM Module Description ................................................................ 37 5.2.1 6KP6-RJMST, Co[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) THE MAGNUM LINE Ethernet connect ivity products "Designed and Manufactured i n the USA" Overview GARRETTCOM, INC. OFFERS THE PREMIUM-QUALITY MAGNUM  LINE OF ETHERNET LAN CONNECTIVITY PRODUCTS WITH INDUSTRY-STANDARD FUNCTIONAL ITY AND BUILT-IN FIBER CONFIGURABILITY. M[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 8 OR 9-PORT AND 4 OR 5-PORT PE RSONAL HUBS, W/ MAN. UP-LINK SW . MEDIA CONVERTERS, 10MB AND 100MB SERIES ALL MEDIA COMBINATIONS, INCL . FIBER ST, SC, MM., S INGLE MODE THE “X-LINE” OF CONFIGURABLE MI X ED MEDIA PRODUCTS: STACKABLE CONCENTRATORS, SNMP OPTIONAL, 13-PORTS MINI-C[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1, 488,000 pps Switching Processing Type: Store and Forward with IEEE 802.3x full- duplex flow -control, non-blocking Data Rat[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Fiber Single-mode conn ector types: Fiber Port, SC-type: Fiber optic single-mode, 100BASE-FX Fiber Port, LC-type Fiber SFF single-mode, 100BASE-FX Fiber Port, 1000BASE-FX, GBIC modules LEDs: Per Port (one set at the port, one set in top or front) LK: Steady ON when media link is [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) For DC internal power supplie s at –48VDC, 24VDC and 125VDC, including Dual Source options ( for continuity of operation when either of the DC input sources are interrupted) , see Appendices B and C. Per-port jumpers and switches The copper daughter board has on inte rnal switc[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 1.2 Ordering Information Magnum Managed Fiber Switch (16 ports max) MODEL DESCRIPTION Magnum 6K16V -Magnum 6K16V Managed Fiber Sw itch, base unit for vertical mounting May be configured with a selecti on of 10/100/1000 6K16V fiber and copper port connector types, 16 total ports m[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) fiber ports connector GBPM-2OTX Two-port Gigabit 6K module for 6K 16V Switches, provides two GBIC open transceiver port for a user-sel ectable GBIC transceiver module GBPM-COTX One slot Gigabit 6K module for 6K16V Switches, uses one 6K16V slot and provides one GBIC open transceiv[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the contents of this pack age for any signs [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 2.2 Product Description - Mag num 6K16V Managed Fiber Switch M agnum  6K16V Managed Fiber Switches pr ovide modularity of fiber and copper ports, 10Mb 100Mb and Gigabit speed ports, and comprehensive management software in a compact industrial-grade packag e. Setting a new sta[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) all of these, and is available now. Magnum 6K16V Managed Fiber Switche s have heavy duty metal cases and auto-ranging power supplies for operation with standard AC power worldwide. Internal DC power supplies are optional. All DC power input types (5V, 24V, 48V, 125V) are supporte[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) operation” on that port when lit, the F/H LE D indicates operation in full-duplex mode when ON (half-duplex when OFF), and the blinking ACT LED indicates receiving Activity on the port. A fiber cable must be c onnected into a SFF port and the Link (L K) indicator for that port [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) available as four 10/100 switched RJ-45 copper ports and two 100Mb switched multi- mode fiber ST, SC or single mode SC or Long Reach SC ports. For ports numbering, ports 1,3,5,7 are copper, ports 2 and 6 are fibe r, ports 4 and 8 are not present. 1 3 5 7 2 6 TX RX TX LK RX LK ACT[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 2.2.4 Four-Port 10 Mb and 100Mb mm Fiber ST Modules The 4-port @10Mb ST fiber modules be have the same as the 4@100Mb ST fiber modules except for the 10Mb speed. For ports numbering, ports 1, 2, 5, 6 are present, ports 3, 4. 7, 8 are not present. There is also a simila r 100Mb fi[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) The 1000Mb Gigabit fiber-port modules on the Magnum 6K16V are normally set (factory default) to operate in full- duplex mode for best fiber distance and performance. The 1000Mbps SC fiber-optic m odule on the Gigabit -SX and Gigabit-LX transceivers are compatible with the IEEE 80[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) load is greatest. When the Magnum 6K16V Switch detects that its free buffer queue space is low, the Switch sends industry standard (fu ll-duplex only) PAUSE packets out to the devices sending packets to cause “flow cont rol”. This tells the sending devices to temporarily stop[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 2.3 Features and Benefits  Managed switching for high performance Ethernet LA Ns Magnum 6K16V Switches provide non-blocking (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included. They are typically used in LAN traffic c[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 2.4 Applications Magnum 6K16V Fiber Switches offe r high performance, modularity and availability. They provide the flexibility of 100Mbps fiber and copper ports as well as single or dual Gigabit(1000Mb) ports, with industry-standard LAN management software. Magnum 6K16V Switches[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 10 or 100Mb fiber provide a very widespread option to the users to mix match their legacy and advance network needs. The m odularity of the 6K16V Managed Fiber Switch makes it an attractive choice for use in a pplications with LAN connections to an organization’s multiple site [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 100Mbps full-duplex future-proof fiber medi a to provide secure long distance LAN connection. The entire network is sharing a higher bandwidth Gigabit-enabled data- mining server for the vital database located in a separate secured building. The copper ports are required for mult[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 3.0 Installation Before installing the equipment, it is necessary to take the following precautions: 1.) If the equipment is mounted in an enclosed or multiple rack assembly, the environmental temperature around the equipment must be less than or equal to 50 0 C. 2.) If the equip[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) IEEE Standard Media Type Max. Dis tance Port Modu le Fiber: 100BASE-FX m m 1 Fiber 220m ( ft) GBIC-SXSC sgl.m 2 Fiber 5Km GBIC-LXSC 100BASE-FX m m 1 Fiber 2.0km (6,562 ft) 6K6-MSC, -MST sgl.m 2 Fiber 18.0km (95K ft) SSC, SSCL small form factor m m 1 Fiber 2.0km (6,562 ft) 6K8-MTR[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) (9/125 microns for single-mode, 50/125 or 62.5/125 microns for multi-mode where xx/xx are the diameters of the core and the core plus the cladding respectively). Single-mode fiber allows full bandwidth at longer distan ces, and may be used to connect 10 Mb nodes up to 10 Km apart[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) The following procedure describes how to connect a 1000BASE-T tw isted pair segment to the RJ-45 port. The procedure is the sa me for both unshielded and shielded twisted pair cables. 1. 1000Base-T connections require that all four pairs or wires be connected. Insert either end o[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) into holding position by moving the bottom of the 6K16V inwards to a vertical position. The DIN-Rail latches and brackets are heavy duty, and will hold the 6K16V securely in position, even with cabling attached to the unit. To release the 6K16V from the DIN -Rail m ounting, press[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Note that the back of the 6K16V unit is held out from the panel or wall behind it, creating a rear space of about ¼ inch or 1cm. This allows air circulation and cooling of the rear part of the case. Since the 6K16V uses s pecial internal thermal techniques (patent pending) to mo[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) to the unit. Power supply options are available to suit the 6K16V Switches to special high- availability communications and/or heavy industrial-grade applications, including: * -48VDC, 24VDC and 125VDC with single DC input, * -48VDC, 24VDC and 125VDC with dual-source DC input, Se[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 3.6 6K16V Port Module (6KPM) Installation Note: the modules used in the 6K16V vertical mount unit are similar to those used in rack-mount 6K units, except that the top LEDs are positioned for front viewing for the vertical-mount 6K16V model. The modules have the letter”V” in [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Step 2. Remove Chassis Cover The Magnum 6K16V chassis consists of top-bottom, front and rear parts and assembled together with the help of 18 Philip s-head screws. There are 6 screws located on the front panel of the unit (2 each on top and the bottom and one each at the side), 1[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Step 3. Remove front panel face p late retaining screws There are two PM slots (A, B) located on the front of the chassis cover. Looking into the vertical placed Chassis cover of the unit, there are three brackets w ith retaining screws (#256 flat head ) which hold each PM Face p[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Fig 3.6.2b Granddaughter Board placed in slot A and secured with three 5/16 stand- off’s Step 3. The figure here illustrates the basic layout of an individual PM card. Each 6KPM card fits into the space provided on the m ain board. Fig. 3.6.2c Daughter Board, top view of versio[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown below in Fig. 3.6.2f) on the top of the latching connectors until the connectors latched up securely. Figure 3.6.2f[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) installed inside of the top cover. Step 8. Once all 6KP M cards have been installed (including faceplates for empty slots), the chassis cover should be repl aced. Make sure the chassis cover is aligned properly before securing the enclosure. 3.6.3 Removing 6KPM Cards To properly [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 3.7 Connecting a Management Console Terminal to Magnum 6K16V Use a DB-9 “null modem” cable (use on any serial port)or “one DB-9 and one USB” ( USB port on the laptop) null modem cable to connect the Magnum6K16V Console Port (the RS- 232 port on the 6K16V Switch) to the yo[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 4.0 OPERATION This chapter describes the functions and operation of the Magnum 6K16V Switch. 4.1 Switching Functionality A Magnum 6K16V provides switched connec tivity at Ethernet wire-speed among all of its ports. Th e Magnum 6K16V supports10/100M bs for copper m edia and 10 or [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 4.2 Status LEDs For all Magnum 6K16V models : PWR : Power LED, O N when external power is applied to the unit. LK : Steady ON, Link status for 10 Mbps and 100Mbps operation. ACT : ON with port activity for 10 Mbps and 100Mbps operation. F/H : Full / Half duplex LED, ON when the p[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) When Magnum 6K16V RJ-45 copper ports are set for auto-negotiation and are connected to another auto-negotiating device, there are 4 different speed and F/H modes possible depending on what the other device supports. These are: (1) 100Mb full-duplex, (2) 100Mb half-duplex, (3) 10 [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 4.5 Flow-control, IEEE 802.3x standard Magnum 6K16V Switches incorporate a flow-control mechanism for Full- Duplex mode. The purpose of fl ow-control is to reduce the risk of data loss if a long burst of activity causes the switch to save fra mes until its buffer memory is full. [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) Fiber Port Module Speed, Std. Mode Std. km fdx (hdx) Wave - length nm Cable Size  m X’mitr Output P T , dB R’cvr Sens. P R , dB Worst OPB, dB Worst* distance Km, fdx typical OPB, dB typical* distance Km, fdx 6KP4V- F10ST 10Mb FL Multi- Mode 2 (2) 850 62.5/125 100/140 50/12[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 5.0 Introduction - Magnum 6K16V Managed Fiber Switch Port Modules This chapter describes each Port Module (PM), including appearance, functionality, and status displays. 5.1 Inspecting the Package and Product This section applies only to PMs shippe d as separate items, i.e., 6K16[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module The Magnum 6KP6-RJMST is a co mbo 6 port module of RJ-45’s at 10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual- mode ST-type connectors and dual spee[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 39 www Garre t t C om c om .. RJ10MST, 6KP4- 4 Port@ 10Mb ST Fiber Port 2 2 6 T LK RX ACT H F/ TX RX LK ACT H F/ TX R X LK ACT H F/ TX RX LK ACT H F/ 1 5 3 1 FULL/HALF 1 ACTIVITY LINK 2 3 The Magnum 6KP4-F10ST is a 10Mb multi-mode fiber module with 4 ST- Fiber ports. All four fib[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) module allow to connect the 100Mb demand of Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-m ode fiber. (Single- mode for 10Km distance m ay be available as a special order). Each port has an Activity (ACT) LED indicating pac[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) as 25+ Km (see Power Budget, Section 4.5) Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode wh en lit (or half-duplex when off).[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) LED is OFF. 5.2.5 6KP8-MTRJ, 8 @100Mb multi-mode FX , MTRJ Small-Form-factor Magnum 6KP8-MTRJ is a multi-mode fiber optic 8-port module equipped with a small-form-factor MTRJ-type connector. It looks almost like an RJ-45 port, but it is black in color. The MT-RJ’s small size an[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) essentially the same as the ST and SC -types. It has the same LEDs per port indicating port activity (ACT), Li nk (LK), and FDX or HDX operation 5.2.6 6KP8-45MT, 4@ 10/100Mbps RJ-45 and 4@100Mb multi-mode FX , MTRJ Small-Form-Factor The Magnum 6KP8-45MT Module is a combo module w[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). 5.2.8 6KP8-45LC, Combo 4@ 100Mbps multi-mode -LC small-form factor and 4@ 10/100 Mbps RJ-45 Connector The Magnum 6KP8-45LC Module is a co mbo module with a combination of[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) connecting to a hub or another switch. The switch is configured as (=) position by de fault settings from the factory, the left-most RJ-45 port is used for segments going to workstations and other user node device connections as other ports of the module. For cascaded and up-link[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 5.2.10a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode FX , LC Small-Form-Factor The Magnum 6KP8-45SLC eight port M odule is a combo m odule with copper and fiber (Small Form Factor) LC type fiber ports. The small size of LC connectors give an advantage of placing more [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) removing the transceiver, press the clips on eith er side of the transceiver at the same tim e and pull the transceiver out. Each port has an Activity (ACT) LED indicating packets being received and a Link (LK) LED indicating proper connectivity with the remote device when lit. 5[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 6.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments . The installation of a Magnum 6K16V Switch is a st raightforward procedure (see INSTALLATION, Section 2.6); the operation is also st[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) 6.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a. The nature and duration of the problem; b. Situations w hen the problem occurs; c. The components involved in the [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) GarrettCom will carefully test and evaluate all returned products, will repair products that are under warranty at no charge, and w ill return the warranty-repaired units to the sender with shipping charges prepaid (see Warranty Information, Appendix A, for complete details). How[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) APPENDIX B : Internal DC Power Supply Options B1.0 SPECIFICATIONS FOR MAG NUM 6K16V SWITCHES, DC POWER Power Magnum 6K16V models, for –48V and 24V DC & 125VDC and 5V Power i nput Each Magnum Model 6K16V Managed Switch (DC option) requires a DC power source, from for 24VDC, [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) applied to the two inputs. It protects the Switch from incorrect DC input connections. An incorrect polarity connection, for example, w ill neither affect the Switch, its internal power supply, nor will it blow the fuse in the internal power supply. The manual power “On-Off” [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) hooked up at the last. When power is applied, the green PWR LED will illuminate. Note: The GND should be hooked up first. The 6K16V unit has a floating ground, so the user may elect to Gr ound either + or = terminal to suit th e customer’s us e. Before connecting hot lin es to [...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) APPENDIX C: Internal DC Dual-Source Power Option C1.0 SPECIFICATIONS - FOR MAGNUM 6K16V FIBER SWITCH Power Supply (Internal, -48VDC Dual -Source, model # Dual-Src-48V) DC Power Connector: First Source: “A+”, “A -“ , 2nd Source “B - “, “B+” GND: Terminal for “ear[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) C4.0 FEATURES AND BENEFITS OF THE DUAL-SOURCE DESIGN a) The Switch unit can receive power from either input, “A” or “B”. The hub will normally draw its power from the DC source with the highest voltage at a given tim e. b) The Switch unit will not allow power to flow fr o[...]

Magnum 6K16V Managed Fiber Switch Installation and User Guide (06/04) C5.1 UL Require me nts The following must be adhered to in or der to conform to UL requirements: 1. Minimum 18 AWG cable for connection to a Centralized DC power source. 2. Minimum 14 AWG cable for conn ection to earthing wiring. 3. Use only with Listed 10 A circuit brea ker prov[...]