Español dropdown-ico

Gefen EXT-IP-2-RS2322 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Gefen EXT-IP-2-RS2322. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Gefen EXT-IP-2-RS2322 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Gefen EXT-IP-2-RS2322 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Gefen EXT-IP-2-RS2322, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Gefen EXT-IP-2-RS2322 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Gefen EXT-IP-2-RS2322
- nombre de fabricante y año de fabricación del dispositivo Gefen EXT-IP-2-RS2322
- condiciones de uso, configuración y mantenimiento del dispositivo Gefen EXT-IP-2-RS2322
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Gefen EXT-IP-2-RS2322 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Gefen EXT-IP-2-RS2322 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Gefen en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Gefen EXT-IP-2-RS2322, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Gefen EXT-IP-2-RS2322, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Gefen EXT-IP-2-RS2322. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    Audio Embedder 3GSDI EXT-IP-2-RS2322 User Manual IP to RS-232 Converter *Pr eferred Release A1[...]

  • Página 2

    ii 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water . 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’s instructions. 8. Do not install or place this product near any heat sources su[...]

  • Página 3

    iii Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notied within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electric[...]

  • Página 4

    iv T echnical S upport (818) 772-9100 (800) 545-6900 8:00 AM to 5:00 PM Monday - Friday , Pacic T ime Fa x (818) 772-9120 Email support@gefen.com We b http://www .gefen.com Mailing Addr ess Gefen, LLC c/o Customer Service 20600 Nordhoff St. Chatsworth, CA 9131 1 Pr oduct R egistr ation Register your product here: http://www .gefen.com/kvm/Regist[...]

  • Página 5

    v v Operating Notes • When using the IP to 2 x RS-232 Converter for the rst time, it is recommended that the unit be congured using the Gefen Discovery T ool. The Gefen Discovery T ool is free software that is available from the Support > Downloads section of the Gefen Web site. IP to 2 x RS-232 Converter is a trademark of Gefen, LLC. ©[...]

  • Página 6

    vi Features and Packing List Features • Allows IP control of two RS-232-enabled devices • Supports T elnet and UDP protocols • Each of the RS-232 devices can be addressed independently • Congurable via Web server interface • Independently congurable RS-232 baud rate and line delay for each RS-232 port • Gefen Discovery T ool-compa[...]

  • Página 7

    vii[...]

  • Página 8

    viii Table of Contents 1 Get ting St arted Introduction............................................................................................................ 2 Installation ............................................................................................................. 4 Connection Instructions ...................................[...]

  • Página 9

    [...]

  • Página 10

    [...]

  • Página 11

    IP to RS-232 Converter 1 Ge t ting St ar t ed Introduction............................................................................................................ 2 Installation ............................................................................................................. 4 Connection Instructions ................................[...]

  • Página 12

    page | 2 Introduction RS-232 1 Power IP Reset EXT -IP-2-RS2322 Gefen 5V DC IP control RS-232 2 IP to 2xRS-232 Converter RS-232 1 Power IP Reset EXT -IP-2-RS2322 Gefen 5V DC IP control RS-232 2 IP to 2xRS-232 Converter RS-232 1 Power IP Reset EXT -IP-2-RS2322 Gefen 5V DC IP control RS-232 2 IP to 2xRS-232 Converter 6 4 5 3 2 Getting S tart ed Gettin[...]

  • Página 13

    page | 3 Introduction ID Name Description 1 IP Reset Resets the unit to its default IP settings. 2 RS-232 1 Connect an RS-232 cable from this port to an RS-232 device. See Installation (page 4 ) for more information. 3 Power This LED will glow bright blue when the unit is powered. 4 5V DC Connect the included 5V DC power supply to this power recept[...]

  • Página 14

    page | 4 Installation Getting S tart ed Connection Instructions 1. Connect an Ethernet cable between the IP-based control device and the IP control port on the IP to 2 x RS-232 Converter . An Ethernet switch can also exist between the IP to 2 x RS-232 Converter and the IP-based control device (see Sample Wiring Diagram below). 2. Connect an RS-232 [...]

  • Página 15

    [...]

  • Página 16

    [...]

  • Página 17

    page | 7 IP to RS-232 Converter 2 A dv anced Oper ation RS-232 and IP Conguration ................................................................................ 8 Conguration using the Gefen Discovery Tool .............................................. 8 Conguration using RS-232 ...........................................................[...]

  • Página 18

    page | 8 RS-232 and IP Conguration Adv anced Oper ation Adv anced Oper ation Configuration using the Gefen Discovery Tool When using the IP to 2 x RS-232 Converter for the rst time, it is recommended that the unit be congured using the Gefen Discovery T ool. The Gefen Discovery T ool is free software that is available from the Support >[...]

  • Página 19

    page | 9 Adv anced Oper ation Configuration using RS-232 T o congure the IP settings of the IP to 2 x RS-232 Converter using RS-232 commands, use the following procedure: 1. Connect a null-modem (“crossover”) cable from the RS-232 port on the computer to the IP to 2 x RS-232 Converter . The null-modem cable can be connected to either RS-232 [...]

  • Página 20

    page | 10 RS-232 and IP Conguration Adv anced Oper ation Adv anced Oper ation 5. Set the gateway (router) IP address using the #set_gateway command. 6. Set the T elnet listening port using the #set_tcp_term_port command. 7. Set the HTTP listening port using the #set_http_port command. 8. Set the UDP remote IP address using the #set_udp_rip comma[...]

  • Página 21

    page | 1 1 Adv anced Oper ation Command Description #help Displays a list of all available commands #set_add_delim Enables or disables option to add delimiter to data #set_device_descr Sets the device description #set_end_del Sets the end frame delimiter #set_gateway Sets the gateway (router) IP address #set_http_port Sets the HTTP listening port o[...]

  • Página 22

    page | 12 Adv anced Oper ation Adv anced Oper ation Commands Command Description #show_serial_params Displays the settings of the specied RS-232 port #show_telnet_pass Displays the current TCP terminal password #show_ver_data Displays the rmware and hardware version of the IP to RS-232 Converter #system_wide_reset Restarts the IP to 2 x RS-23[...]

  • Página 23

    page | 13 Adv anced Oper ation Commands #help Displays help on a specic command. If no command is specied ( param1 ), then a list of all available commands will be displayed. Set param1 to “full” to display a list of all commands. S yntax #help P ar amet ers param1 Command (optional) Example #help #set_add_delim Cmd #set_add_delim: Set Ad[...]

  • Página 24

    page | 14 Commands Adv anced Oper ation Adv anced Oper ation #help #show_ipcong #set_ipadd #set_netmask #set_gateway #set_http_port #set_tcp_term_port #set_udp_port #show_ver_data #show_telnet_pass #set_telnet_pass #use_tcp_term_pass #set_udp_rip #set_udp_rport #use_udp_access #use_udp_echo #use_tcp_access #set_serial_params #show_serial_params [...]

  • Página 25

    page | 15 Commands Adv anced Oper ation #set_add_delim Enables or disables the option to include a delimiter as part of the data sent to the control system. S yntax #set_add_delim param1 param2 P ar amet ers param1 V alue [1 ... 2] param2 State [0 ... 1] V alue Description 0 Off 1 On Example #set_add_delim 1 Add delimiter mode to ON R elated C omma[...]

  • Página 26

    page | 16 Commands Adv anced Oper ation Adv anced Oper ation #set_device_descr Sets the device description. The device description cannot exceed 30 characters in length S yntax #set_device_descr param1 P ar amet ers param1 Description [30 chars max.] Example #set_device_descr LivingRoom_Bridge2 Device Description changed to: LivingRoom_Bridge2 R el[...]

  • Página 27

    page | 17 Commands Adv anced Oper ation #set_end_del Sets the end-delimiter mode and value for the specied serial port. The End Delimiter value must be specied in hexadecimal. Before executing this command, the Start Delimiter must be set, using the #set_start_del command. S yntax #set_end_del param1 param2 param3 P ar amet ers param1 Serial [...]

  • Página 28

    page | 18 Commands #set_gateway Sets the gateway address. The gateway must be typed using dot-decimal notation. The matrix must be rebooted after executing this command. The default gateway is 192.168.1.1 . S yntax #sgateway param1 P ar amet ers param1 Gateway Example #set_gateway 10.5.64.1 New IP Gateway set to: 10.5.64.1 R elated C ommands #set_a[...]

  • Página 29

    page | 19 Commands #set_http_port Species the Web server listening port. The unit must be rebooted after executing this command. The default port setting is 80 . S yntax #set_http_port param1 P ar amet ers param1 Port [1 ... 1024] Example #set_http_port 82 New HTTP port set to: 82 R elated C ommands #set_gateway #set_ipadd #set_netmask #show_ipc[...]

  • Página 30

    page | 20 Commands #set_ipadd Species the IP address of the IP to 2 x RS-232 Converter . The IP address must be specied using dot-decimal notation. The unit must be rebooted after executing this command. The default IP address is 192.168.1.72 . S yntax #set_ipadd param1 P ar amet ers param1 IP address Example #set_ipadd 10.5.64.187 New IP set[...]

  • Página 31

    page | 21 Commands #set_netmask Sets the subnet mask. The subnet mask must be entered using dot-decimal notation. The unit must be rebooted after executing this command. The default net mask is 255.255.255.0 . S yntax #snetmask param1 P ar amet ers param1 Net mask Example #snetmask 255.255.0.0 New IP Mask set to: 255.255.0.0 R elated C ommands #set[...]

  • Página 32

    page | 22 Commands #set_send_byte_cnt Sets the send-byte count value for bridging mode. S yntax #set_send_byte_cnt param1 P ar amet ers param1 Serial port [1 ... 2] param2 Byte count [0 ... 255] Example #set_send_byte_cnt 1 100 UART 1 bridging send byte count limit is set to 100 bytes R elated C ommands #set_add_delim #set_end_del #set_serial_mode [...]

  • Página 33

    page | 23 Commands #set_send_time_out Sets the time-out value for sending data collected from a device to the control system in Bridging Mode when a Start Delimiter and End Delimiter have been set. If no data has been collected for the specied time, the data is sent without waiting for the End Delimiter . S yntax #set_send_time_out param1 P ar a[...]

  • Página 34

    page | 24 Commands #set_serial_descr Assigns a descriptor to the specied serial port. The serial port description cannot exceed 20 characters in length. The default description is None . S yntax #set_serial_descr param1 param2 P ar amet ers param1 Port [1 ... 2] param2 Description [20 chars max.] Example #set_serial_descr 1 DVD_Ctrl Serial port [...]

  • Página 35

    page | 25 Commands #set_serial_mode Sets the mode of the specied serial port. The default mode for all serial ports (1 - 2) is TCP Bridge mode. S yntax #set_serial_mode param1 param2 P ar amet ers param1 Port [1 ... 2] param2 State [1 ... 3] Mode Description 1 TCP bridge 2 UDP bridge 3 T erminal mode Example #set_serial_mode 1 2 Serial port 1 wo[...]

  • Página 36

    page | 26 Commands Adv anced Oper ation Adv anced Oper ation #set_serial_params Assigns the settings to the specied serial port. S yntax #set_serial_params param1 param2 param3 param4 param5 param6 P ar amet ers param1 Port [1 ... 3] param2 Word length [5 ... 8] param3 Stop bits [1 ... 2] param4 Parity Parity Description n None e Even o Odd m Ma[...]

  • Página 37

    page | 27 Commands Adv anced Oper ation Example #set_serial_params 1 8 1 N 19200 1000 Serial port 1 parameters: Word length = 8 bits Stop bits = 1 bit Parity = None Baud Rate = 19200 Bps Line Delay = 1000 ms R elated C ommands #show_serial_params[...]

  • Página 38

    page | 28 Commands Adv anced Oper ation Adv anced Oper ation #set_start_del Sets the Start Delimiter mode and value for the specied serial port. The Start Delimiter must always be specied before the End Delimiter . S yntax #set_start_del param1 param2 param3 P ar amet ers param1 Serial port [1 ... 2] param2 State [0 ... 1] Mode Description 1 [...]

  • Página 39

    page | 29 Commands Adv anced Oper ation #set_tcp_br_port Sets the TCP bridge listening port for the specied serial port. The default port settings for RS-232 1 and RS-232 2 ports are 49200 and 49201, respectively . S yntax #set_tcp_br_port param1 param2 P ar amet ers param1 Serial port [1 ... 2] param2 TCP port [1 ... 65535] Example #set_tcp_br_[...]

  • Página 40

    page | 30 Commands Adv anced Oper ation Adv anced Oper ation #set_tcp_term_port Sets the TCP terminal listening port. The default port settings is 23 . S yntax #set_tcp_term_port param1 P ar amet ers param1 TCP port [1 ... 65535] Example #set_tcp_term_port 23 New TCP Terminal port set to: 23 R elated C ommands #set_tcp_br_port #set_udp_br_port[...]

  • Página 41

    page | 31 Commands Adv anced Oper ation #set_telnet_pass Sets the TCP T erminal password. The password cannot exceed 20 characters in length. param3 is used to verify the new password. The default password is Admin . S yntax #set_telnet_pass param1 param2 param3 P ar amet ers param1 Old password [20 chars max.] param2 New password [20 chars max.] p[...]

  • Página 42

    page | 32 Commands Adv anced Oper ation Adv anced Oper ation #set_udp_br_port Sets the UDP bridge listening port. The default UDP bridge port settings for RS-232 1 and RS-232 2 ports are 50200 and 50201, respectively . S yntax #set_udp_br_port param1 param2 P ar amet ers param1 Serial port [1 ... 2] param2 Port [1 ... 65535] Example #set_udp_br_por[...]

  • Página 43

    page | 33 Commands Adv anced Oper ation #set_udp_echo_br Enables or disables UDP bridge echo. S yntax #set_udp_echo_br param1 param2 P ar amet ers param1 Serial port [1 ... 2] param2 State [0 ... 1] State Description 0 Disabled 1 Enabled Example #set_udp_echo_br 1 1 The echo of UDP Bridge port 1 is enabled R elated C ommands #set_udp_br_port #set_u[...]

  • Página 44

    page | 34 Commands Adv anced Oper ation Adv anced Oper ation #set_udp_port Sets the UDP server listening port S yntax #set_udp_port param1 P ar amet ers param1 Serial port [1 ... 65535] Example #set_udp_port 50007 New UDP server port set to: 50007 R elated C ommands #set_udp_br_port #set_udp_remote_br #set_udp_echo_br #set_udp_rip #set_udp_rport[...]

  • Página 45

    page | 35 Commands Adv anced Oper ation #set_udp_remote_br Assigns the UDP Bridge settings for the specied serial port. param2 must be entered in dot-decimal notation. S yntax #set_udp_remote_br param1 param2 param3 P ar amet ers param1 Serial port [1 ... 2] param2 Address param3 Remote port [1 ... 65535] Example #set_udp_remote_br 1 192.168.1.7[...]

  • Página 46

    page | 36 Commands Adv anced Oper ation Adv anced Oper ation #set_udp_rip Sets the remote UDP IP address. The IP address must be entered using dot-decimal notation. Each digit can range between 0 and 255. S yntax #set_udp_rip param1 P ar amet ers param1 IP address Example #set_udp_rip 192.168.1.205 New Remote UDP IP set to: 192.168.1.205 R elated C[...]

  • Página 47

    page | 37 Commands Adv anced Oper ation #set_udp_rport Sets the remote UDP listening port. The default port settings is 50008 . S yntax #set_udp_rport param1 P ar amet ers param1 Port [1 ... 65535] Example #set_udp_rport 50006 New UDP Remote port set to: 50006 R elated C ommands #set_udp_br_port #set_udp_echo_br #set_udp_remote_br #set_udp_rip[...]

  • Página 48

    page | 38 Commands Adv anced Oper ation Adv anced Oper ation #show_del_prms Displays the current delimiter parameters for the specied serial port. S yntax #show_del_prms param1 P ar amet ers param1 Port [1 ... 2] Example #show_del_prms 1 Delimiter Param’s in bridge mode, UART 1 Line Delay = 1000ms Time To Force Send = 30ms Count Byte To Force [...]

  • Página 49

    page | 39 Commands Adv anced Oper ation #show_device_descr Displays the device description. S yntax #show_device_descr P ar amet ers None Example #show_device_descr Device Description: IP_BRIDGE R elated C ommands #set_device_descr[...]

  • Página 50

    page | 40 Commands Adv anced Oper ation Adv anced Oper ation #show_ipcong Displays the current TCP/IP and UDP settings. S yntax #show_ipcong P ar amet ers None Example #show_ipcong --------- IP to 2 x RS-232 Converter settings --------- MAC addr = 00:1C:91:01:0F:FF IP addr = 10.5.64.254 Net Mask = 255.255.255.0 Gateway = 192.168.1.254 Web [...]

  • Página 51

    page | 41 Commands Adv anced Oper ation #show_me Enables or disables the ashing of the LED on the device. When enabled, the LED indicator will ash red and blue. The default setting is disabled. S yntax #show_me param1 P ar amet ers param1 State State Description 0 Disabled 1 Enabled Example #show_me 1 Show me is Enabled R elated C ommands #us[...]

  • Página 52

    page | 42 Commands Adv anced Oper ation Adv anced Oper ation #show_serial_descr Displays the description of the specied serial port. S yntax #show_serial_descr param1 P ar amet ers param1 Port [1 ... 2] Example #show_serial_descr 1 Serial port 1 Description: DVD_Ctrl R elated C ommands #set_serial_descr[...]

  • Página 53

    page | 43 Commands Adv anced Oper ation #show_serial_mode Displays the mode of the specied serial port. S yntax #show_serial_mode param1 P ar amet ers param1 Port [1 ... 2] Example #show_serial_mode 1 Serial port 1 working mode is: TCP Bridge Mode R elated C ommands #set_serial_mode[...]

  • Página 54

    page | 44 Commands Adv anced Oper ation Adv anced Oper ation #show_serial_params Displays the current settings of the specied serial port. S yntax #show_serial_params param1 P ar amet ers param1 Port [1 ... 2] Example #show_serial_params 1 Serial port 1 parameters: Word length = 8 bits Stop bits = 1 bit Parity = None Baud Rate = 19200 Bps Line D[...]

  • Página 55

    page | 45 Commands Adv anced Oper ation #show_telnet_pass Displays the current TCP terminal password. S yntax #show_telnet_pass P ar amet ers None Example #show_telnet_pass TCP Terminal password: b055man R elated C ommands #set_telnet_pass[...]

  • Página 56

    page | 46 Commands Adv anced Oper ation Adv anced Oper ation #show_ver_data Displays the current software and hardware version. S yntax #show_ver_data P ar amet ers None Example #show_ver_data Firmware version 1.48 Release date: May 12 2014 Release time: 14:09:37[...]

  • Página 57

    page | 47 Commands Adv anced Oper ation #system_wide_reset Restarts the IP to 2 x RS-232 Converter according to the supplied parameter . S yntax #system_wide_reset param1 P ar amet ers param1 V alue [0 ... 3] V alue Description 0 Reboot only 1 Reset IP settings 2 Reset serial port settings 3 Reset all and reboot Example #system_wide_reset 3 System [...]

  • Página 58

    page | 48 Commands Adv anced Oper ation Adv anced Oper ation #use_discovery Enables or disables discovery access mode. If this mode is disabled, then the IP to 2 x RS-232 Converter will not be discoverable when using the Gefen Discovery T ool. The default setting is enabled . S yntax #use_discovery param1 P ar amet ers param1 State State Descriptio[...]

  • Página 59

    page | 49 Commands Adv anced Oper ation #use_tcp_access Enables or disables TCP access mode. This mode must be enabled before using RS-232 command to congure the IP to 2 x RS-232 Converter . S yntax #use_tcp_access param1 P ar amet ers param1 V alue [0 ... 1] V alue Description 0 Disable TCP access 1 Enable TCP access Example #use_tcp_access 1 T[...]

  • Página 60

    page | 50 Commands Adv anced Oper ation Adv anced Oper ation #use_tcp_term_pass Enables or disables the use of the password during terminal sessions. S yntax #use_tcp_term_pass param1 P ar amet ers param1 V alue [0 ... 1] V alue Description 0 Do not use password 1 Require password Example #use_tcp_term_pass 1 TCP Terminal password at login is set t[...]

  • Página 61

    page | 51 Commands Adv anced Oper ation #use_udp_access Enables or disables UDP access. S yntax #use_udp_access param1 P ar amet ers param1 V alue [0 ... 1] V alue Description 0 Disable UDP access 1 Enable UDP access Example #use_udp_access 1 UDP Access is set to Enabled R elated C ommands #set_udp_br_port #set_udp_echo_br #set_udp_remote_br #set_u[...]

  • Página 62

    page | 52 #use_udp_echo Enables or disables UDP echo. S yntax #use_udp_echo param1 P ar amet ers param1 V alue [0 ... 1] V alue Description 0 Disable UDP echo 1 Enable UDP echo Example #use_udp_echo 1 UDP echo is set to Enabled R elated C ommands #set_udp_echo_br Commands Adv anced Oper ation Adv anced Oper ation[...]

  • Página 63

    page | 53 Adv anced Oper ation Web Interface Using the built-in Web Interface Access the built-in Web interface by entering the IP address of the IP to 2 x RS-232 Converter that was specied in step 3 under Conguration using RS-232 (page 9) . The built-in Web interface is divided into three pages: RS-232, Network, and System. Each main page is[...]

  • Página 64

    page | 54 Web Interface RS-232 Select RS-232 Port Select the RS-232 port from the drop-down list. Options: 1 , 2 Description Enter a description for the device that is connected to the selected RS-232 port. RS-232 Mode Select the desired mode from the drop-down list. Options: TCP Bridge , UDP Bridge , T erminal Adv anced Oper ation Adv anced Oper a[...]

  • Página 65

    page | 55 Web Interface Baud Rate Select the baud rate used by the RS-232 device from this drop-down list. Options : 1 10, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 28800 Data Bits Select the number of data bits in each character from this drop-down list. For most applications, 8 data bits should be selected. 9 data bits are rarely used. Opti[...]

  • Página 66

    page | 56 Web Interface Line Delay (ms) Enter the line delay in this eld. Range : 0 ... 10000 Force Send (ms) If no data is received from the controlled device within the specied time interval, send the collected data to the control system. Range : 0 ... 30 Force Send (bytes) If the specied number of bytes is received from the controlled d[...]

  • Página 67

    page | 57 Web Interface Add Delimiters to data sent Include the delimiter characters in the data sent to the control system. Check the Add box to enable this feature. Options : Enable (checked), Disable (unchecked) Use Start Delimiter Includes the Start Frame Delimiter , used at the end of the preamble of an Ethernet frame. Options : Enable (checke[...]

  • Página 68

    page | 58 Web Interface End Delimiter V alue This value can be up to three ASCII characters (3 bytes), in length. The value must be entered in hexadecimal Range : 00 ... FF (“wildcard” characters, such as **, are acceptable) TCP Port Enter the TCP port in this eld. Range : 0 ... 65535 UDP Local Port Enter the UPD local port in this eld. R[...]

  • Página 69

    page | 59 Web Interface Destination IP Enter the destination (where the data will be sent) IP address in this eld. Range (per byte) : 0 ... 255 Destination Port Enter the destination port in this eld. Range : 1024 ... 65535 UDP Echo Useful in troubleshooting and measuring response times and end-to-end connectivity . Options : Enable (checked)[...]

  • Página 70

    page | 60 Web Interface Network tab MAC Address The MAC address of the IP to RS-232 Converter . The MAC address cannot be changed. Mode Select the network mode from the drop-down list. Options : Static , DHCP IP Address Enter the IP address of the IP to 2 x RS-232 Converter . Range (per byte) : 0 ... 255 Subnet Enter the subnet mask of the IP to 2 [...]

  • Página 71

    page | 61 Web Interface Gateway The gateway (router) IP address to with the IP to 2 x RS-232 Converter is connected. Range (per byte) : 0 ... 255 HTTP Port Select the network mode from the drop-down list. Range (per byte) : 1 ... 1024 Adv anced Oper ation[...]

  • Página 72

    page | 62 Web Interface Enable TCP Access Enables or disables TCP access. Options : Enable (checked) , Disable (unckecked) Require Password on Connect Forces password prompt for T elnet sessions. Options : Enable (checked) , Disable (unckecked) User Name Displays the user name for TCP sessions. The user name cannot be changed. Old Password T ype th[...]

  • Página 73

    page | 63 Web Interface New Password T ype the new password in this eld. The password is automatically masked when entered. The password is case-sensitive. Maximum length: 8 characters Conrm Password Re-type the new password in this eld. The password must match the same password that was entered in the New Password eld. Maximum length: [...]

  • Página 74

    page | 64 Web Interface Enable UDP Access Enables or disables UDP access. Options : Enable (checked) , Disable (unckecked) UDP Port Sets the UDP port. Range : 1 ... 1024 Enable UDP Echo Enables or disables UDP echo. Options : Enable (checked) , Disable (unckecked) Adv anced Oper ation Adv anced Oper ation[...]

  • Página 75

    page | 65 Web Interface Destination UDP IP Address Enter the remote UDP IP address in this eld. Range (per byte) : 0 ... 255 Destination UDP Port T ype the remote UDP port in this eld. Range : 1 ... 1024 Enable Discovery Enables or disables discovery mode. This feature must be enabled in order for the Gefen Discovery T ool to detect the unit [...]

  • Página 76

    page | 66 Web Interface Adv anced Oper ation Adv anced Oper ation System tab Download (Download Current Conguration) Saves the current conguration of the IP to 2 x RS-232 Converter to a le. Browse... (Restore Conguration) Selects the conguration le to load. See the Download button, above. Restore Click this button to upload the se[...]

  • Página 77

    page | 67 Web Interface Adv anced Oper ation Browse... (Firmware Update) Click this button to select the rmware le to be uploaded. Update Click this button to upload the selected rmware le. See the Browse... button, above. Factory Reset Use these check boxes to select the type of factory-reset to perform. Placing a check mark in the des[...]

  • Página 78

    [...]

  • Página 79

    IP to RS-232 Converter 3 Appendix Default Settings ................................................................................................... 70 RS-232 ........................................................................................................ 70 Network .........................................................................[...]

  • Página 80

    page | 70 Default Settings Appendix Appendix The following table lists the default setting of the IP to 2 x RS-232 Converter , as displayed under the built-in Web interface. RS-232 RS-232 Settings Select RS-232 Port • 1 Description • None RS-232 Mode • TCP Bridge Baud Rate • 19200 Data Bits • 8 Parity • None Stop Bits • 1 Bridging Set[...]

  • Página 81

    page | 71 Appendix Network IP Settings MAC Address • Device-dependent (cannot be changed) Mode • Static IP Address • 192.168.1.72 Subnet • 255.255.255.0 Gateway • 192.168.1.254 HTTP Port • 80 TCP / T elnet Settings Enable TCP Access • Disabled Require Password on Connect • Disabled User Name • Admin (cannot be changed) Old Passwor[...]

  • Página 82

    page | 72 Appendix Connectors, Indicators, and Controls RS-232 • 2 x DB-9, male IP control • 1 x RJ-45 Power • 1 x 5V DC, locking Power indicator • 1 x LED, blue IP Reset button • 1 x T act-type, recessed Operational Power • 5V DC Power consumption • 1W (max.) Physical Dimensions (W x H x D) • 4.3” x 1” x 3.4” (1 10mm x 26mm x[...]

  • Página 83

    [...]

  • Página 84

    20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com Stretch it. Switch it. Split it. Gefen’s got it. ® 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com *Pr eferred[...]