Gigabyte GA-C1037UN-L manual

GA-C1037UN-L User's Manual Rev . 1001 12ME-C1037NL-1001R[...]

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specications and features in this manual may be made by GIGABYTE wit[...]

T able of Contents GA-C1037UN-L Motherboard Layout .............................................................................. 4 GA-C1037UN-L Motherboard Block Diagram.................................................................. 5 Chapter 1 Hardware Installation ...............................................................................[...]

GA-C1037UN-L Motherboard Layout Box Contents 5 GA-C1037UN-L motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield 5 One IDE cable The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. - 4 - KB_MS[...]

GA-C1037UN-L Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." Line-Out (Front Speaker Out) MIC (Center/Subwoofer Speaker Out) Line-In (Rear Speaker Out) PS/2 KB/Mouse Intel ® Celeron ® 103 7U CPU DMI CPU CLK+/- (100 MHz) Dual BIOS DDR3 1600/1333 MHz Dual Ch[...]

- 6 - Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the cha[...]

- 7 - 1-2 ProductSpecications CPU  Built in with an Intel ® Dual-core Celeron ® 1037U processor (1.8 GHz) * Do not disassemble the onboard CPU/chipset and the heatsinks/fan by yourself to avoid damage to these components.  2 MB L3 cache Chipset  Intel ® NM70 Chipset Memory  2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB o[...]

- 8 - Internal Connectors  2 x USB 2.0/1.1 headers  1 x Clear CMOS jumper  1 x chassis intrusion header Back Panel Connectors  1 x PS/2 keyboard port  1 x PS/2 mouse port  1 x D-Sub port  1 x parallel port  1 x serial port  1 x HDMI port  4 x USB 2.0/1.1 ports  1 x RJ-45 port  3 x audio jacks (Line In, Line Out, [...]

- 9 - 1-3 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) • Always tur[...]

- 10 - T o congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver . Line In Jack (Blue) The line out jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. LineOutJack(G[...]

- 1 1 - 1-5 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer . Unplug the power cord from the power outlet to prevent damage to the devices.[...]

- 12 - DEBUG PO RT G.QBOFM 13 1 24 12 AT X A TX: Pin No. Denition Pin No. Denition 1 3.3V 13 3.3V 2 3.3V 14 -12V 3 GND 15 GND 4 +5V 16 PS_ON (soft On/Off) 5 GND 17 GND 6 +5V 18 GND 7 GND 19 GND 8 Power Good 20 -5V 9 5VSB (stand by +5V) 21 +5V 10 +12V 22 +5V 11 +12V (Only for 2x12-pin A TX) 23 +5V (Only for 2x12-pin A TX) 12 3.3V (Only for 2x1[...]

- 13 - Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 7) SA T A2 1/2/3 (SA T A 3Gb/s Connectors) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. 6) SA T A3 0 (SA [...]

- 14 - 8) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, and system status indicator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables. • PLED (Power LED): System Status LED S0 On S3/S4/S5 Off Connects to the power status indicator on the [...]

- 15 - 10) F_USB1/2 (USB 2.0/1.1 Headers)  The headersconform toUSB 2.0/1.1 specication.Each USB headercan providetwo USB portsvia an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No. Denition Pin No. Denition 1 Power (5V) 6 USB DY+[...]

- 16 - 13) CLR_CMOS(ClearCMOSJumper)  Usethis jumpertoclear theCMOS values(e.g.date informationandBIOS congurations)andreset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. • Always[...]

- 17 - BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows theusertomodifybasic[...]

- 18 - 2-2 M.I.T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall systemcongurations. Incorrectly doingoverclock/overvoltage mayresult indamage toCPU, chipset, ormemory and reduce the useful life of these components. This page is for adva[...]

- 19 - & CPU Thermal Monitor Enables or disables Intel ® CPU Thermal Monitor function, a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOSautomaticallycongurethissetting.(Default: Auto) & CPU EIST Function Enables or disa[...]

- 20 - & CaseOpen Displays the detection status of the chassis intrusion detection device attached to the motherboard CI header . Ifthe system chassiscover isremoved, this eldwill show"Y es", otherwiseit willshow "No".T o clear the chassis intrusion status record[...]

- 21 - 2-4 BIOSFeatures & BootOptionPriorities  Species the overall boot order from the available devices. For example, you can set hard drive as the rstpriority (BootOption#1) and DVD ROM drive as the second priority (BootOption#2) . The list only disp[...]

- 22 - & HardDrive/CD/DVDROMDrive/FloppyDrive/NetworkDeviceBBSPriorities  Speciesthe bootorderfor aspecicdevice type,suchas harddrives,optical drives,oppy diskdrives, and devices that support Boot from LAN function, etc. Press <Enter> on this item to en[...]

- 23 - & StorageBootOptionControl Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller .  Disabled Disables option ROM.  Legacy Only Enables legacy option ROM only . (Default)  UEFI Only Enables UEFI option ROM only.  LegacyFirst  EnableslegacyoptionROM?[...]

- 24 - 2-5 Peripherals & SA T A Controller(s) Enables or disables the integrated SA T A controllers. (Default: Enabled) & SA T A Mode Selection  AllowsyoutodecidewhethertoconguretheSA T AcontrollerintegratedintheChipsetto AHCImode.  IDE  CongurestheSA T Acontroller?[...]

- 25 - & Legacy USB Support Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled) & EHCI Hand-off Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off support. (Default: Disabled) & Port 60/64 Emulation Enables or disables emulation of I/O ports 64h and 60h. This should be enabled[...]

- 26 - 2-6 Power Management & Resume by Alarm Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following:  Wakeupday:T urnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.  Wake up hour/minute/se[...]

- 27 - 2-7 Save & Exit  Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.  Any Key Press any key to turn on the system. & PowerOnPassword Set the password when PowerOnByKeyboard is set to Password . Press <Enter> on this item and set a password with up to 5 characters and then press [...]

- 28 - & BootOverride Allows you to select a device to boot immediately . Press <Enter> on the device you select and select Ye s toconrm.Y oursystemwillrestartautomaticallyandbootfromthatdevice. & SaveProles  Thisfunctionallowsyouto savethecurrentBIOSsettings?[...]

- 29 - Regulatory Statements Regulat or y Notic es This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of p[...]

- 30 -[...]

- 31 -[...]

- 32 - Contact Us GIGA-BYTE TECHNOLOGY CO., L TD. Add res s: No. 6, Bao C hian g Road , Hsin -Tie n Dist ., New Taipei C it y 231, T a iwan TEL: + 88 6 -2- 8912-4 0 00, FA X: +8 86 -2- 8 91 2- 40 05 T e ch. a nd No n-T ec h. Su ppo rt (S ale s/ Mar keti ng) : htt p://gg ts.g igaby te.c om. tw WEB a ddr ess (E ngli sh): htt p://w w w.gig aby te.c om[...]