Haier L20AV6-A0 manual

USER'S MANUAL LCD TV RECEIVER Please read this manual carefully before using your television and keep this manual in a good place for future reference. MODEL: L20AV 6-A0[...]

Content Before operation Basic operation Others T echnic operation Warnings and Cautions Safety Precautions Preparation for the Remote Control Keys and Ports Front panel Back panel Keys of remote control Power on/off and menu operation Viewing TV Programs Tuning Auto search Manual search Fine tune Skip Ajusting the Picture and the Sound Multiple pi[...]

Warning and Cautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Power supply There is a AC-DC adapter with the set that transform AC t o DC power. and the power value supplied to the adapter is marked on the label on t he adapter . Only DC power can be input into the set and AC power must not be input. And the output power value of the AC-DC adapte[...]

Safety Precautions The product should be tightly fixed to avoid drop damages and even fire. To avoid fire hazards, do not use this product under direct sunlight or closely to heat sources. Do not locate the product close to water or oil, which may cause fire hazards. Unplug the power supply and antenna of the product when there is a rainstorm, espe[...]

Safety Precautions (continued) Don't use or store inflammable materials near the product to avoid explosion or fire hazards. Don't place the product in a humid area to avoid fire hazards. The antenna of the product should be away from electric cable to avoid electric shocks. Never touch the plug when your hand is wet as this might cause e[...]

Preparation for the Remote Control + - Battery loading 1.Slide open the cover of the battery compartment on the back of the remote controller. 2.Load two 5# alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Make sure that there is no obstacle between the remote controlle[...]

Keys and Ports Front panel Back panel 1 MENU: menu display/enter the sub-menu/confirm the adjustment. 2 V-/V+ volume adjustment and adjust the parameters in the menu. 3 P-/P+ program minus and plus, select the menu options 4 TV/AV all input source select:PC-RGB/COMPONENT/AV/S-VIDEO/ TV/exit the menu . 5 POWER: press to be on /standby mode. 6 Power [...]

Keys of remote control Buttons and Descriptions 1 6 7 8 9 2 3 4 5 0 TV/A V MENU VOL- 1 2 3 4 5 6 7 8 9 13 10 11 12 VOL+ 1. 2. MENU Press to display menu or enter the sub-menu 3. CH+/- 4. VOL+/- 5. 6. TV/AV Select among 7. 8. 9. AUTO.AD Only available in PC-RGB and COMPONENT 10. 11. 12. S.STD Press to select the sound mode among NEWS,NATURE,THEA TER[...]

Power on/off and menu operation Power on/off If you want to switch off the TV to standby mode press POWER button on TV or on remote controller . 2 If the television is on standby mode , you could press POWER ( ) button on remote control or on the TV to turn on the TV . 1 Connect AC-DC adaptor and power supply wire first, then plug insert the power [...]

Viewing TV Programs There are 200 channels from 0 to 199. VOLUME CHANNEL SOUND SKIP THIS AUTO FINE FINE TUNE MANUAL SEARCH AUTO SEARCH OFF ON 4 1 6 7 8 9 2 3 4 5 0 Q.VIEW CH+ VOL- VOL+ CH- MENU How to select program If the sound of one channel is abnormal Use the direct-digit choosing button 3 Use Q.VIEW Press the button from 0-9 to select a one di[...]

T uning There are three ways of searching: automatic search, manual search and MFT (manual fine tune). You may operate it either on the TV or on the remote control. Here is mainly about the remote control. Auto search AUTO SEARCH 1.Press MENU button and CH+/- to select TV SETTING (note: TV SETTING is only available in TV) 2.Press MENU button to ent[...]

TUNING (Continued) Manual search Manual search DOWN UP is used to search the lower frquency channel. is used to search the higher frequency channel. If you want to memory another channel, press CH+/- to select CHANNEL and MENU to confirm, then VOL+/- to select the channel number. Repeat the steps above. Press CH+/- button or the Direct-digit Choosi[...]

TUNING (Continued) Fine tune Auto fine When you can't get a satisfactory picture and audio effect, you can fine tune to obtain. 1.Press CH+/- or digit buttons to select the channel, press MENU button and CH+/- to select TV SETTING Press MENU button to enter the TV SETTING and CH+/- to select AUTO FINE 3.Press MENU button to enter the AUTO FINE[...]

TUNING (Continued) Skip Skip 4 Press MENU to confirm and VOL+/- to set ON. Press TV/AV to exit the menu. 5 When you select channels with CH+/- button, this channel will be skipped. However, you can also use the digit Choosing button on the remote control to select this channel directly. 3 Press CH+/- to select SKIP THIS. 1 Press CH+/- or digit butt[...]

Multiple picture modes Adjusting the Picture and the Sound How to select the picture mode You may select the mode you want from the three preset modes and one individual mode. Press the P . STD button to select a mode you like. MILD, NATURE, VIVID and USER totally four picture modes can be selected alternately. MODE PICTURE QUALITY MILD NATURE VIVI[...]

Multiple sound modes Adjusting the Picture and the Sound How to select the sound mode You can quickly select your most favored sound mode from the following four kinds of modes. Press the S.STD button to select the sound quality that you want.NEWS/ NATURE/ THEA TER/ USER can be selected in turn(their parameter may be adjusted due to your need). NEW[...]

Setting function Setting function Setting OSD Language 3 Press MENU button to confirm and VOL+/- button to select the language. 2 Press CH+/- to select LANGUAGE. 1 Press MENU button and CH+/- to select OSD SETTING,then press MENU button to enter LANGUAGE ENGLISH OSD.H OSD.V 50 50 Setting OSD position 3 Then you can adjust the parameter of OSD.V wit[...]

·½±ãµÄͼÏñºÍÉùÒôµ÷Õû¹¦ÄÜ£¨½ÓÉÏÒ³£© Blue screen Setting function(continued) 3 Press MENU button to confirm, then press VOL+/- to select ON/OFF. 2 Press CH+/- to select BLUE SCREEN. 1 Press MENU button and then CH+/- to select VIDEO ADV ANCE, then press MENU button to enter Reset You can select INPUT SOURCE by the sa[...]

PC Mode Function PC mode function 1024X768 60HZ IMAGE SETTING COLOR SETTING OSD SETTING RESET INPUT SOURCE CONTRAST BRIGHTNESS AUTO CONFIG PHASE CLOCK 50 H-POSITION V-POSITION NATIVE 9300K 6500K USER 50 50 50 Image adjustment You can adjust the contrast, brightness and the position of the image. 1 Press TV/A V to select PC-RGB. 2 Press MENU and CH+[...]

Connection Connecting additional equipments Headphone port AC-DC adapter To power socket You can connect the DVD,VCR to the set to enjoy a higher quality of picture . Laser DVD with output terminal T o video input T o S-VIDEO input T o audio input Headphone port Plug the headphone in the television headphone port, then the television program sound [...]

To D-SUB IN 1. Link VGA output port of a PC to the D-SUB IN port of the television. 2. Link audio cable of a PC to PC AUDI O IN port of television. 3. Press TV/AV button to select PC-RGB mode. 4. T urn on the PC and its screen picture will be dis played on the television screen. In this way, the television can be used as a PC monitor. VGA input To [...]

Troubleshooting Used as TV Before arranging for service, firstly know the status and then chec k simply as follows: No picture, no sound Verify if the television is properly plugged. Verify if the television is properly supplied power . Verify if electricity is available. Blank screen Verify if correct signals are input. Press TV/A V button to chan[...]

Specifications Following are some reference specifications, which may vary from that of the television that you have just purchased due to technical innovations. Model L20AV6 - A0 W 550mm D 165 mm Size/W eight H 450 mm NG 7.4Kg Power Connected to the AC - DC adapter Color/Sound system PAL DK/I/BG Power consuption 60W Antenna input 75 Audio output 1[...]

V0.1 0090506956A[...]