Haier XQB42-62 manual

Names of the parts.............the 2 nd cover Safety precautions .......................1 Installation and adjustment ..................3 Install the water inlet hose............5 Preparation before washing .............7 Put in the laundries .........................8 Put in the detergent .......................9 Use the operation buttons ........[...]

Meaning and description of the symbols Honourable users, Thank you for choosing our products. Our products integrate high-tech, precision,frontier science.T o facilitate using it, please read this manual carefully and operate this machine according to it. Before Using Before Using Names of the par ts the end connecting to the water inlet hose joint[...]

Before Using Before Using Safety precautions Please insert the power cord into special rece- ptacle with rated voltage.If the power cord is three-phase wire,please use three-phase rec- eptacle.The earthing terminal of the receptacle must be earthed reliably .If it is two-phase wire, please guarantee that the earthing wire is ear- thed reliably .If [...]

Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat[...]

Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure: Before Using Before Using Installa tion and ad[...]

1. The height of the drain hose shall be less than 10 Cm, or the drainage will not be smooth , and cost such long time that machine may stop at mid way. 2. Do not step on or press the drain hose. 3. If the drain hose is too long , cut it at mid point. T o make smooth drainage, cut the front end of the hose into slope. 4. If extra drain hose is need[...]

Water tap,suitable Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. 3. Loosen the screw till the water tap can be accessed. Put the jointer of the water inlet hose on the tap. See to Figure 2. (If the tap diameter i[...]

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately . 2.Put the nut of the water inlet hose on the valve jointer. 3.Fasten the nut. Swaying it gently to confirm if it's suitable. 1.Close the water tap. 2.Press the[...]

Confirm if there's special requirment for the laundries. Clear the pocket. T ake out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion,please put the laundries with buttons into other laundries. Preparation before washing 1.Con[...]

Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 4.[...]

How to use the whitener Fill water to decided level. Dilute the whitener with container . Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color . The whitener shall not touch the laundries directly . Refer to the user's manual for the usage and quantity of the whitener. For[...]

a. Using process Using process 4 Use the operation buttons Description of the function of the buttons Mode and meaning of the indicator light Flashing: indicate the running program Flashing rapidly: indicate abnormal condition On: indicate the program about to run, or indicate the selected mode PROGRAM QUICK TWICE WASH WASH SOAK one or more one out[...]

Using process Using process SPIN START PAUSE After the power is switched on, push it to start the machine start/pause botton "Power switch" button Push the "On/Off" button to switch on the power. During pause, push it to resume working. During working, push it to pause working. When the power is on, push it again to switch off t[...]

Using process Using process b. Operating procedure and explanations for the buttons Press the " PROGRAM "button to select the suitable procedure program. After switching on the power, the machine will set to standard program automatically including "wash-rinse-spin". To select other program, push the "Procedure selection&qu[...]

Using process Using process Selection method of the procedure programs Time list of each program (minute) Ti mes of pushing the "Process Selector" button Selected procedure program Applicable procedure Contents (the lighted indicators indicate the programs about to run) Wash, rinse, spin (standard program) Rinse, spin Spin (spin after dra[...]

Using process Using process * T otal time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: the time from intermittent running to finishing * When selecting " Twice wash " program, first soak for about 20 minu[...]

Using process Using process Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). Please first pull off the power plug from the receptacle before[...]

Trouble shooting Answer to question It is the water remained in the factory inspection of performance. Phenomenan The reason How to settle Common phenomena Phenomena Explanation Balance the laundries to avoid slanting. The program is setting the drain time. Some time is needed before it starts spinning. It is because that the laundries are slanting[...]

Packing list Name User's manual Certificate of qualification Post card Certificate of warranty Quantity One One One One One Storage position Inside the document bag Inside the document bag Inside the document bag Inside the document bag Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the [...]

Specification Specification Model XQB42-62 Rated voltage frequency 220V ~ 50Hz Rated washing / spinning capacity 4.2kg (weight of standard dry cloth) Water level/Water quantity (about) High/36L, Medium/30L, Low/21L Max water consumption Injection pressure 0.03Mpa-0.78Mpa Rated washing power 325W Rated spinning power 255W Weight About 29kg Dimension[...]