Haier XQB50-10A manual

Automatic Washing Machine XQB50-10A User's manual This manual is for Please read this manual carefully before using. Retain it for future reference.[...]

Names of the parts.............the 2 nd cover Safety precautions .......................1 Installation and adjustment ..................3 Install the water inlet hose............5 Preparation before washing .............6 Put in the laundries .........................7 Put in the detergent .......................8 Use the operation buttons ........[...]

Meaning and description of the symbols Before Using Before Using Names of the par ts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safe[...]

Before Using Before Using Safety precautions Please plug the plug on special 120V AC receptacle.Please guarantee that the earthing wire is ear-thed reliably . The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine[...]

Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine. Keep the machine away from direct sunlight and heat[...]

The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Adjust the adjustable foot: Adjust the installation position Before Using Before Using Installa tion and adjustment Please install and adjust the machine [...]

Before Using Before Using Usage of the drain hose The drainage shall be smooth with the drain hose. 1.put the drain hose up to suitable position. Do not put it on ground 2.Do not step on or press the drain hose. Notes: the highest point of drain pipe should be higher than the water level of washing tub for avoiding to siphon phenomenon during drain[...]

Wa ter a bsorption cu shion Nut of the water inle t hose Jointer o f the w ater inle t val ve Install the wa ter inlet hose 1. Insert a new flat washer into each end of the inlet hoses. Firmly put the washers in the coupling. 2. Connect the water inlet hoses to the water faucet. Use the new hose sets supplied with the washer. Any other old hose set[...]

Confirm if there's special requirment for the laundries. Clear the pocket. T ake out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion,please put the laundries with buttons into other laundries. The quantity of the laundries sh[...]

Reference weight of the laundries: working suit up,down jeans about 800g shirt jacket single bed sheet Socks underpants undershirt pajamas blanket cotton,about 900g cotton,about 300g cotton,about 800g cotton,about 600g blending,about 50g cotton,about 70g cotton,about 180g The capacity of washing and spinning of the machine refer to the largest weig[...]

How to use the whitener Fill water to decided level. Dilute the whitener with container . Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color . The whitener shall not touch the laundries directly . Refer to the user's manual for the usage and quantity of the whitener. For[...]

a. Using process Using process 4 U se the operation buttons Description of the function of the buttons PROGRAM RESERV A TION W A TER LEVEL SOAK W ASH RINSE SPIN PROCEDURE ST A TUS PROGRAM ST A TUS HEA VY GENTLE QUICK W ASH W ASH SPIN ST ANDARD T o indicate -- during sensing. T o indicate remaining min. During program running. T o indicate remaining[...]

Remarks: After pressing "Power On/Off" to connect power supply , if the washing machine lasts idle more than 10 min, it would automatically shut off the supply . Using process Using process XQB50-10A POWER ON/OFF ST ART PA U S E After the power is switched on, press it to start the machine During working, push it to pause working. During [...]

After switching on, the "Standard" program will be the default. If other full-automatic program is desired, you can press the button "Program" to get the corresponding indicator on. Refer to the "Button of 'program'"paragraph on page 9. Example: Use the "Quick" program for slightly soiled articles. [...]

Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen laundries . Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Attention [...]

T otal time: including the normal water inlet time, drain time, excluding the power off time. The total washing time may be influenced by the water inlet pressure and water level. Spin time: the time from intermittent running to finishing. The Jeans program could combine the process of soak during which the washing machine firstly soak for about 25[...]

Using process Using process Disposal after washing When washing, lint filter must be used After using, please clean it in time. Lint filter: 1. Pull upward to detach 2.Clean the lint Put it in water and clean while it is still wet. (See to Figure 1). 3. Press downward to assemble. 1.After washing, close the water faucet. ( If needed, you can disman[...]

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department . Do not repair it by yourself. Phenomena The reason How to settle The top lid is not clos[...]

User's manual Name Components of the water inlet hose Bottom plate T apping screws ST4x16 One One One One One Eight One Quantity Inside the document bag Storage position Automatic washing machine Inside the accessory bag Inside the accessory bag Inside the accessory bag Inside the accessory bag Between the upper cushion of the washing machine [...]

Rated washing / spinning capacity W ater level/W ater quantity (about) Max water consumption Rated washing power Rated spinning power Weight Dimension 5.0kg About 1 44L (High water l evel; Standard program) 0.03MPa-0.78MPa 325W 285W About 39kg L 510mm W 500mm H 882mm Model XQB50-10A Specification Specification Lowest/20L Lo w/30L Mid/37L Hig h/48L [...]