HANNspree DT06-10A1 manual

TV M CH CH NTSCTVTWEN1203 MAC-001018 Based on the "Winnie the Pooh" works by A.A. Milne and E.H. Shepard. User's Manual 9.6" Liquid Cr ystal Display T ele vision DT06-10A1 2F , No.362, Jui-Kuang Rd., Neihu District, T aipei City 1 14, T aiwan, R.O.C. TEL: 886-2-87520000 F AX: 886-2-87527092 www .hannspree.com[...]

Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..................................... 5 4. Safety Notices ............................. .................................. 6 5. R[...]

Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............ ... 2 8 Brightness ............................................................ ... 2 9 Contrast ............................................................... ... 3 0 Video Setting ........................................................... 3 1 Hue ...................[...]

3 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by looking at the rear of your TV . Thank you for purchasing our Liquid Crystal Display T elevision (LCD TV). With this product, you will be able to enjoy superior audio and video while enriching your lifes tyle wi[...]

4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been carefully checked for accu- racy; however , no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Copyright © Copyright 2003 Hannspree, Inc . All rights reser[...]

5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused. T o prevent potential danger , follow the instructions below when installing, o[...]

6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it. 3. If the power cord or plug is damaged or worn, unplug it immedi- ately[...]

7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in ca se the product needs to be shipped in the future. 3. Follow the product and warn ing label instructions. 4. Any changes or modificat[...]

8 Optimal V iewing Dist anc e 102 cm T V M CH CH[...]

9 Import ant Safety I nstructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus n ear water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings. Install in accordance with th e manufacturer ’s instruct ions. 8. Do not instal l near a[...]

10 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point wh ere they exit from the appar atus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus. Whe n a cart is used, use caution when movi ng the cart/app aratus [...]

11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing. Do not place or drop met als, small objects, or flammable materials in t he [...]

12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from power trans- mission lines to av oid possible danger . Remove the power cor[...]

13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any o ther power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly . If there is any problem that can[...]

14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must a ccept any interference received, including inter ference that may cause und esired operation. This equipment has been tested an[...]

15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio no ise emissions from digital app aratus as set out in the Radio Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B. CE Conformity S t atement 2 This device complies with the requirem[...]

16 Thank you for purchasing this Liquid Crysta l Display TV . Y our LCD TV is designed to be safe, versatile, and easy to use. The design of the prod- uct is based on the “Winnie the Pooh” , which makes it a fun addi- tion to any room. Y ou can watch broadcast or cable television channels, and easily con- nect a VCR, VCD or DVD player to the st[...]

17 Make sure the following component s are included in the b ox. Contact your vendor immediately if any thing is missing or damaged. TV TV M CH CH User ’ s Manual Quick St art Guide Wire Material Package G W A 1 8 3 0 0 V 8 0 C V W - 1 E 7 7 8 7 4 Power Cord Power Adapter 4-IN-1 Cable Quick Start Guide U ser's M anual RCA Jack x 3 S Jack x 1[...]

18 Fr o n t V i e w Description Function 1 Power LED/ Power T urns the T V on and off. Red LED in di - cates power in st andby mode. 2 Menu T urns the On-Screen Display (OSD) menus on and of f. 3 TV/A V Selects the input source to be displayed (TV , A V1, or A V2). 4 Select channel Changes the channel. Press CH S to increase the channel number . Pr[...]

19 Input and Output P or ts Description Function 1 Left and right audio in (of A V1) Connects to VCR/VCD/DVD p layer CVBS RCA left and right audio cables (white and red). 2 DC-IN Connects to the included power adapter . 3 Headphone line out Connects to head phones or other audio device. 4 AV 2 Connects to the included 4-IN-1 cable. 5 Antenna/cable [...]

20 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable. Note If you cannot receive channels after connecting an antenna or cable TV line, try scanning [...]

21 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 port s on the back of the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player . Actual c onnections vary according to the make and model of the devi[...]

22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are co lor-coded (black, red, white, yellow). Connect each color- coded cab le to the ap propriate c onnector on your de[...]

23 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the product. • The internal TV speakers will not outp u[...]

24 Connecting the P o wer Adapter 1. Connect the power cord to t he power adapter as illustrated. 2. Plug the power adapter connector into the DC-IN on the rear p anel of the TV . 3. Insert the three-pronged plug at the other end of the powe r cord into a powe r outlet. Refer to the “Power Supply Safety Not es” on pa ge 6. ( (R) )( (L) ) S 4 ( [...]

25 Using the R emote Control For best results, use the remote control within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration. T V M C H C H 3m 30 5m 3m 30 30 30 Using the TV 10[...]

26 T ur ning the TV On and Off 1. Press the POWE R button; the power indicator LED chang es from red to green, indicating that the power has been turn ed on. 2. Press the POWE R button again; the power indicator LED changes from green to red, indicating that the TV is in standby (of f) mode. Selecting Channels Press CH UP and CH DOWN on the control[...]

27 Switching Source Signals Press the SOURCE button on the remote control or the TV button on the control p anel to select the incoming source signal. The current source setting CH xx appears on the top lef t corner of the screen; A V1 or A V2 appears on the bottom right corner of the screen. Note The TV supports S-V ideo input in addition to norma[...]

28 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapt er describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol panel. The following sections explain h ow to adjust settings in the OSD menus with the cont[...]

29 Brightness 1. Press MENU to enter the OSD menus. 2. Press the CH UP button or CH DOWN button t o s e l e c t B r i g h t n e s s . 3. Press MENU . The brightness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DOWN button to decrease the brightne ss. 6. Press MENU to confirm the setting and return [...]

30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH UP button or CH DOWN button t o s e l e c t C o n t r a s t . 3. Press MENU . The contrast slide bar is highlight ed. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contr ast. 6. Press MENU to confirm the setting and return to the Main[...]

31 Video Setting Press the MENU button to enter the OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button t o s e l e c t Vi d e o Setting. 2. Press MENU to enter the Video Settin g menu. CH CH M Vid eo Setting Hue G B R G R[...]

32 Hue 1. Press the CH DOWN button or CH UP button t o s e l e c t H u e . 2. Press MENU to enter the Hue sub - menu. 3. Press the CH UP button to increase green and decr ease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the V ideo Setting menu. Vid eo Setting Hue G B R G R [...]

33 Saturation 1. Press the CH DOWN button o r CH UP button to select Saturation. 2. Press MENU to enter t he Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the satur ation. 5. Press MENU to confirm the setting and return to the V ideo Setting menu. Vid eo Setting Saturation G B R 12[...]

34 Sharpness 1. Press the CH DOWN button o r CH UP button to select Sharpness. 2. Press MENU to enter the SHARP - NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpn ess. 5. Press MENU to confirm the setting and return to the V ideo Setting menu. Vid eo Setting Sharpness G B R Note T[...]

35 Color T emperature 1. Press the CH DOWN button o r CH UP button to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. Ther e are three default color temperatures to choose from. St andard Color Press the CH DOWN button or CH UP button to select S tandard, then press MENU . W arm Color Press the CH DOWN button or CH UP [...]

36 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button to se lect Audio Setting. 2. Press MENU to enter the Audio Setting menu. CH CH M Main Menu ETC Audio Setting[...]

37 Tr e b l e 1. Press the CH DOWN button o r CH UP button to select T reble. 2. Press MENU to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu. TRE TRE BASS BASS T reble T reble Audio Setting N o [...]

38 Bass 1. Press the CH UP button o r CH DOWN button to select Bass. 2. Press MENU to enter the Bass sub - menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu. TRE TRE BASS BASS Bass Bass Audio Setting Note The new setting i[...]

39 Balance 1. Press the CH DOWN button o r CH UP button to select Balance. 2. Press MENU to enter the Balance sub - menu. 3. Press the CH DOWN button to shift the balance to the left speaker . 4. Press the CH UP button to shift the balance to the right speaker . 5. Press MENU to confirm the setting and return to the Audio Setting menu. Audio Settin[...]

40 Mute 1. Press th e CH DOWN button o r CH UP button to select Mute. 2. Press MENU to enter the Mute sub - menu. 3. Press the CH UP button to turn the mute of f. 4. Pr ess the CH DOWN button to turn the mute on. 5. Press MENU to confirm the setting and return to the Audio Setting menu. Audio Setting TRE TRE BASS BASS Mute Mute Off On Audio Setting[...]

41 Note The setting menu is available when current select source is TV . TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button o r CH DOWN button to se lect TV Setting. 2. Press MENU to enter the TV Setting menu. CH CH M Main Menu ETC TV Setting[...]

42 TV/CA TV 1. Press the CH DOWN button o r CH UP button to select TV/CA TV . 2. Press MENU to enter t he TV/CA TV submenu. Receiving Cable TV Press the CH UP bu tton to select CA TV , then press MENU . Receiving Broadcast TV Press the CH DOWN button to select TV , then press MENU . TV Setting TV/CA TV TV TV CA TV( STD HRC IRC ) AM + - CH TV Settin[...]

43 MTS 1. Press the CH DOWN button o r CH UP button to select MTS. 2. Press MENU to enter the MTS sub - menu. Select from the following options. MAIN Press the CH DOWN button or CH UP button to select MAIN. A green dot appears and MAIN is hig hlighted in yel - low . Press MENU again to confirm th e selection. SAP Press the CH DOWN button or CH UP b[...]

44 Auto Program 1. Press the CH DOWN button o r CH UP button to select Auto Program. 2. Press MENU to enter the Auto Pro - gram Setting submenu. 3. Press the CH DOWN button o r CH UP button to select ON or OFF and press MENU . The screen shows “ Auto Program...” and the channel indicator increment s from 2 to 69 (ANT connection) or from 1 to 12[...]

45 Manual Program 1. Press the CH DOWN button o r CH UP button to select “Manual Program”. 2. Press MENU to enter the Manual Pro - gram submenu. 3. Press the CH DOWN button an d the CH UP button to find the channel you want to add. Press MENU to select the channel. 4. Press MENU to exit, and then access Channel Add/Erase function to add a desir[...]

46 Channel Add/Erase 1. Select the channel you want to add or delete, for example, Channel 28. 2. Press the CH DOWN button or CH UP button to select CH. Add/Erase. 3. Press MENU to enter the Channel Add/Erase submenu. Select from the following options. Add Channel 1. Press the CH DOWN button or CH UP button to select Add. 2. Press MENU to selected [...]

47 Favorite Ch annels 1. Press the CH DOWN button or CH UP button to select Favorites CH. Edit. 2. Pr ess MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favor - ite channels: M1, M2, M3, and M4. 4. Press the CH DOWN button a n d the CH UP button to select th e channel number you want to set for M1. Press MENU to confi[...]

48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH UP button the CH DOWN button o r to select Miscellaneous Setting. 2. Press MENU to enter the Mis- cellaneous Setting menu. CH CH M Main Menu ETC Miscellaneous Miscellaneous[...]

49 Language 1. Press the CH DOWN button o r CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T -Chinese (T raditional Chinese). 4. Press the CH DOWN b u t to n and the CH UP button to select a language. The OSD language changes as soon as you select a langu[...]

50 Sleep Timer The sleep timer turns the TV of f automatically af ter a set period of time. 1. Press the CH DOWN button o r CH UP button to select Sleeper . 2. Press MENU to enter the Sleeper sub- menu. 3. The screen displays the available sleep timer setting: Off, 30, 60, 90, and 120 minutes. 4. Press the CH DOWN button an d the CH UP button to se[...]

51 OSD Display This setting allows you to set th e amount of information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH DOWN button o r CH UP button to select OSD Dis play . 2. Press MENU to enter the OSD Display submenu. 3. The screen displays the avai[...]

52 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOWN button o r CH UP button to select T i me Setting. 2. Pres s MENU to enter th e T ime Setting submenu. 3. The screen displays the current set- ting. The hour is highlighted in yellow . 4. Press the CH DOWN button an d the CH UP button to adjust the [...]

53 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function erases all of yo ur custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.) to the fact ory default values. The rese t function cannot be reversed once it begins.[...]

54 T urn the power of f before you be gin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoi d the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning flu ids. If your model has leat her co[...]

55 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the TV button to cycle through connected video sources. • Press the CH UP button or CH DOWN button to switch to other TV stations. • Check the TV/CA TV OSD settings. See “TV/CA TV” o[...]

56 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly . Snow appears on the screen. • Adjust the location of the A[...]

57 Item Specifications DT06-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 194.4 mm (H) x 145.8 mm (W) TV System NTSC Video System A V1: CVBS RCA jack A V2: S-Video or CVBS: 10-pin mini-DIN Audio System (Input) A V1: RCA lef t & right jacks (Input) A V2: RCA lef t & ri[...]

58 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV . A television distribution system that uses [...]