HANNspree WT0C-15A1 manual

15" Liquid Cr ystal Display T ele vision WT0C-15A1 NTSCTVTWEN1203 MAC-001153 Batman visit[...]

Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..................................... 5 4. Safety Notices ............................. .................................. 6 5. R[...]

Table of Contents 2 Mute ................................................................ ... 3 9 Video Setting ........................................................... 4 0 Hue ................................................................. ... 4 1 Saturation ........................................................... 4 2 Sharpness ...........[...]

3 The instructions on this manual are for the model(s) listed on the front cover . Before you start reading, check your product number by looking at the rear of your TV . Thank you for purchasing our Liquid Crystal Display T elevision (LCD TV). With this product, you will be able to enjoy superior audio and video while enriching your lifes tyle wit[...]

4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been care fully checked for accuracy; however , no guarantee is given to the correctness o f the content s. The information in this document is subject to change without notice. Copyright © Copyright 2003 Hannspree, Inc. All rights reser[...]

5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused. T o prevent potential danger , follow the instructions below when installing, o[...]

6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it. 3. If the power cord or plug is damaged or worn, unplug it immedi- atel[...]

7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual carefully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case th e product needs to be shipped in the future. 3. Follow the product and warn ing label instructions. 4. Any changes or modificati[...]

8 Optimal V iewing Dist ance[...]

9 Import ant Safety Instructio ns 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dr y cloth. 7. Do not block any vent ilation openings. Install in accordance with th e manufacturer ’s instruct ions. 8. Do not instal l near any[...]

10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. Use only with a cart, stand, tripod, bracket, or table specified by th e manufacturer , or sold with the apparatus. Whe n a cart is used, use caution when movi ng the cart/app ar[...]

11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volta ge electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing. Do not place or drop met als, small objects, or flammable materials in t he [...]

12 Installation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vents. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger . Remove the power cord[...]

13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho c k or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly . If there is any problem that can[...]

14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any interfe r ence received, including inter f erence that may cause undesired operation. This equipment has been tested a[...]

15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio noise emissions from digital a pparatus as set ou t in the Radio Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B. CE Conformity S t atement 2 This device complies with the requirem[...]

16 Thank you for purchasing this 15-in ch Liquid Crystal Display TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The design of the produ ct is based on Gotham City , which makes it a fun addition to any room. Y ou can watch broadcast or cable television channels, and easily connect a VCR, VCD or DVD player or a game device to t[...]

17 Make sure the following component s are included in the box. Cont act your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manual Wire Material Package VGA Cable Power Cord Power Adapter 4-IN-1 cable RCA Jack x 3 S Jack x 1 User's M anual Quick Start G uide Warranty a n d [...]

18 F r ont View Description Function 1 Power / Power L ED T urns the TV on and off. Green LED indicates power on. 2 Select channel Changes channels. Press CH to increase the channel number . Press CH to decrease the channel number . In PC or A V mode, press either button to return to TV mode. 3 Adjust v olume Press VOL to increase th e audio volume[...]

19 Input and Output P or ts Description Function 1 LINE OUT Connects to e xternal amplifier or speakers. 2 DC 12V Connects to the included power adapter . 3 LINE IN Connect s to a PC's line out port . LINE-OUT LINE-IN R-AUDIO-L VIDEO DC-IN AV2 VGA ANT 11 0 23 5 46 7 8 9[...]

20 4 AV 2 Use the included 4-IN-1 Audio/ Video cable to connect external devices, such as a VCR, VCD, or DVD player . Audio Input: A V connectors white and red audio cables. Video Input : A V connector video (yellow) or S-Video ca bles. 5 HEADPHONE Connects to head phones . 6 R-AUDIO Connects to a right audio (red) ca ble 7 VGA Connects to a PC. 8 [...]

21 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CA TV cable to ANT Jack (VHF/UHF IN Jack) on th e back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV cable. Note If you cannot receive channels after connecting to an antenna or cable TV line, try scanning for chann[...]

22 Connecting to A V Devices Connect external devices such as a VCR, VCD or DVD playe r , or video game to the TV using the 4-IN-1 cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player . Actual c onnections may vary according to the make and model of the device. Refer to t[...]

23 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digita l camera. Actu al connec- tions may vary according to t he make and model of the device. Refer to the user’s manual included with th e camcorder or camera for more detailed instruction s. Note The cables [...]

24 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using t he RCA Jacks provided (some game devices may require a unique ada pter that is not provided). Actual connections may vary according to the make and model of the game device. Refer to the user’s manual included with the [...]

25 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the speaker or headphone line out port as illustrated. Notes • External speakers or headphones are not included with the product. • The internal TV [...]

26 Connecting to a PC Y ou can connect the TV to a PC and use it as a n external monitor . Connect the TV’ s VGA port to the PC’ s VGA port. Connect the TV’s line in port to the PC’ s line out port to listen to the PC’s aud io output on the TV’s speakers. Refer to the following illustration. Note Y ou can conn ect the line out port of a[...]

27 Connecting the P owe r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet. DC-IN input jack LINE-OUT LINE-IN R-AUDIO-L VIDEO DC-IN AV2 VGA ANT Power[...]

28 Using the Remote Co ntr ol For best results, use the remote control within a distance of 5 me ters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration. 10 Using the TV[...]

29 T ur ning the TV On and Of f 1 Press the POWER button on th e remote control (or control panel). The power LED on the side of the TV changes from red to green, indicating that the power has been turned on. 2 Press the POWER button again; the power LED changes fr om green to red , indicating that th e TV is in off mode. Selecting Channels Press C[...]

30 Switching Source Signals Press the SOURCE button to select the in coming source si g nal. The current source setting (TV/CA TV , A V1, A V2 or PC ) appears on the upper lef t corner of the screen. N ote The TV supports S-V id eo input in addition to normal video and audio sig- nals. The TV detects the signal type automatically and gives priority[...]

31 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the control panel. Note : The following sections explain how to adjus t settings in the OSD menus using the contr[...]

32 Brightness 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast me nu. 4 Press the CH UP button to increase the brightness. Press the CH DOWN button to decrease the brightness. 5 Press MENU to select Return. 6 Press the CH DOWN[...]

33 Contrast 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast me nu. 4 Press MENU to select Contrast. 5 Press the CH UP button to increase the contrast. Press the CH DOWN button to decreas e the contrast. 6 Press MENU to select [...]

34 Audio Setting Press the MENU b utton to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU to enter the Audio Setting menu. PC Audio Setting Return Select Menu OK LR T reble Bass Balance SRS On Off On Off Mute[...]

35 Tr e b l e 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press the CH UP button to increase the treble. Press the CH DOWN button to decrease the treble. 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the Audio Setting me[...]

36 Bass 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Bass. 5 Press the CH UP button to increase the bass. Press the CH DOWN but - ton to decrease the bass. 6 Press MENU to select Return. 7 Press the CH DOWN button to exi[...]

37 Balance 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Balance. 5 Press the CH UP button to ch ange the balance to t he right speaker . Press the CH DOWN button to change the balance to the lef t speaker . 6 Press MENU[...]

38 SRS This option enables the 3D Surround Sound fea ture. 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select SRS. 5 Press the CH DOWN button to turn the SRS on. Press the CH UP but- ton to turn the SRS off. 6 Press MENU to s[...]

39 Mute 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Audio Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Mute. 5 Press the CH DOWN button to t urn the mute on. Press the CH UP but - ton to turn the mute of f. 6 Press MENU to select Return. 7 Press the CH DOWN button to ex[...]

40 Video Setting Press the MENU b utton to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Video Settin g. 2 Press MENU to enter the Video Settin g menu. PC Video Setting Return Select Menu OK GR Hue Saturation Sharpness Color T emp Standard[...]

41 Hue 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select V i deo Setting. 3 Press MENU to enter the Video Setting menu . 4 Press the CH DOWN button to increase the red hue . The ima ge becomes more red. Press the CH UP button to in crease the hue towards the green hue . The imag e becomes more green. 5 Press [...]

42 Saturation 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select V i deo Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Saturation. 5 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. Press the CH DOWN button to decrease the saturation. Th[...]

43 Sharpness 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select V i deo Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Sharpness. 5 Press the CH UP button to increase the sharpness. Press the CH DOWN button to decrease the sharpness. 6 Press MENU to select Return. 7 Press the CH[...]

44 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select V i deo Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Color T emp. The following choices are available. W arm Pr es s the CH UP button or CH DOWN b u tt o n to selec t W arm. St andard Pr es s the CH UP bu[...]

45 TV Setting Press the MENU b utton to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to se lect TV Setting. 2 Press MENU to e nter the TV Setting menu. PC TV Setting Return Select Menu OK TV/CA TV MTS Auto Program Manual Program CA TV STD Dual Ye s No[...]

46 TV/CA TV 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set - ting menu. 4 Select one of the following choices. Receiving Air TV Pr es s the CH UP button or CH DOWN b u t to n to selec t AIR TV when using an antenna to receive TV . Receiving Cable TV Pr es s the [...]

47 MTS 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select MTS. The following choices are available. MAIN Pr es s the CH UP button o r CH DOWN b u tt o n to selec t Main (default), the defa ult audio signal belonging to a particula[...]

48 DUAL Pr es s the CH UP button o r CH DOWN b u tt on to select Dual, w hich enables broadcast of the main signal on one speaker , and the alternate audio signal on the other sp eaker . 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the TV Setting menu. PC TV Setting Return Adjust Menu Next TV/CA TV MTS Auto Program Manual Progr[...]

49 Auto Program 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select Auto Program . 5 Press the CH DOWN button to select Y es. Channel indicator va lues scans from 2 to 69 (antenna connection ) or from 1 to 125 (CA TV cable connecti[...]

50 Manual Program This function allows you search p resent channels and erase channels. 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select TV Setting. 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select Manual Pro- gram. 5 Press the CH UP button to enter the Manual Program menu. 6 Press the CH[...]

51 Channel Add/Erase After you h ave found a channel us ing Manual Program, follow the following instruction to add or erase the ch annel. 1 Press MENU to select Add/Erase. 2 Select one of the following options. Add Channel Pr es s the CH DOWN button t o select Add. The channel is added to the channel list. Erase Channel Pr es s the CH UP button to[...]

52 PC Setting Press the MENU b utton to enter the OSD menus. 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to se lect PC. 4 Press MENU to ente r the PC menu. PC PC Setting Return Select Menu OK H.Position V .Position Phase Clock More Option 50 16 0 1688[...]

53 Horizontal Position 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set - ting menu. 4 Press the CH UP button to move the display to the right. Press the CH DOWN button to move the dis - play to the left. 5 Press MENU to select Return. 6 Press the CH DOWN button t[...]

54 V ertical Position 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select V . Position. 5 Press the CH UP button to move the display up. Press the CH DOWN button to move the display do wn. 6 Press MENU to select Return. 7 Press the[...]

55 Phase 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Phase. 5 Press the CH UP button to increase the phase. Press the CH D O WN button to decrease the phase. 6 Press MENU to select Return. 7 Press the CH DOWN button to exit[...]

56 Clock 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Clock. 5 Press the CH UP button to increase the clock. Press the CH DOWN but - ton to decrease the clock. 6 Press MENU to select Return. 7 Press the CH DOWN button to exi[...]

57 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select PC Setting. 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select the Mor e option . 5 Press the CH UP button to enter the Color T emp menu. 6 Press MENU to select Color T emp. Wa r m Press t h e CH DOWN button to select Wa[...]

58 User The User option enables users to make their own color settings. Press t h e CH UP button t o se le ct User . The user menu appears. –p r e s s MENU to select User R , User G , or User B. –p r e s s t h e CH UP button o r CH DOWN button to increase or decrease the selected color tem - perature. 7 Press MENU to select Return. 8 Press the [...]

59 Miscellaneous Setting Press the MENU b utton to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to se lect Miscellaneous. 2 Press MENU to e nter the Mis- cellaneous menu. PC Return Select Menu OK Language Sleeper OSD Display Time Setting More Option Off English On Off Miscellaneous[...]

60 Language 1 Press MENU to enter the OSD menus. 2 Press the CH UP button or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella - neous menu. 4 Press the CH UP bu tton or CH DOWN button to select Chinese or English . 5 Press MENU to select Return. 6 Press the CH DOWN button to exit the Miscellaneous menu. PC Miscellaneous Re[...]

61 Sleep er The sleeper turns the TV of f automatically after a set period of time. 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Sleeper . 5 Press the CH UP bu tton or CH DOWN button to select a power off time: –O f [...]

62 OSD Display When set to Off , the OSD display (source data on top lef t corner of the TV screen) turns off after approximately 5 seconds. When set to On, the OSD does not turn of f automatically . 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous me[...]

63 Time Setting This setting allows you to set the TV clock. 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU t o s e l e c t Ti m e S e t t i n g . 5 Press the CH UP bu tton to enter the T ime Setting menu. 6 Press MENU to select t[...]

64 OSD Background This setting allows you to make the OSD b ackground transparent or opaque. 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select More Option. 5 Press the CH UP button to enter the More Option menu. 6 Press MEN[...]

65 Reset The Reset function returns all of your TV’ s user settings to their fac- tory defaults. Wa r n i n g : The reset fun ction will erase all o f your custom and favorite channel settings, and will reset all displa y settings (such as contrast, bright- ness, etc.) to the factory de fault values. The reset function cannot be reversed once it [...]

66 By default, OFF is already selected (highlighted in yellow). The TV immediately reset s when ON is selected and you see the message on the screen. 8 Press MENU to select Return. 9 Press the CH DOWN button to exit the More Option menu. Reset ...[...]

67 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avo id dam- aging the finish. Wipe t he shell with a dry sof t cloth and use neutra l cleaning fluids. If your model h[...]

68 Situation Solution No picture and sound. • Connect the power cord properly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. •P r e s s CH UP or CH DOWN to switch to other TV stations. • Check the TV/CA TV OSD settings. See “TV/CA TV” on page 46. ?[...]

69 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute o ff. Screen image turns over . • Make sure the video signal cable is con- nected properly . Snow appears on the screen. • Adjust the location of the[...]

70 PC Mode Support Timing WT0C-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 pin D-SUB), S- Video Input and Compos- ite Video Input (through the 4-IN-1 cable) Audio System Line in, Line out 10-pin mini-DIN[...]

71 Aspect Ratio The ratio of width to height of a film, image or display screen. Broadcast TV Broadcasting video signals using high-freq uency electromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevision, the original name for cable TV . A te levision distribution system that uses [...]

is a trademark of SRS Labs, Inc. SRS technology is incorpo- rated under license from SRS Labs, Inc.[...]