Heat & Glo LifeStyle 6000C manual
- Consulta online o descarga el manual de instrucciones
- 86 páginas
- 22.94 mb
Ir a la página of
manuales de instrucciones parecidos
-
Indoor Fireplace
Heat & Glo LifeStyle BW36
24 páginas 0.27 mb -
Indoor Fireplace
Heat & Glo LifeStyle 6000CL-IPI-T
82 páginas 24.62 mb -
Indoor Fireplace
Heat & Glo LifeStyle 8000TVC
31 páginas 1.39 mb -
Indoor Fireplace
Heat & Glo LifeStyle BE-41LPC
69 páginas 4.44 mb -
Indoor Fireplace
Heat & Glo LifeStyle 6000TRI-IPI
34 páginas 1.38 mb -
Indoor Fireplace
Heat & Glo LifeStyle 6000 ARCH
46 páginas 1.33 mb -
Indoor Fireplace
Heat & Glo LifeStyle 6000TV-OAK-IPI
20 páginas 0.75 mb -
Indoor Fireplace
Heat & Glo LifeStyle SL-750TV-IPI-E
47 páginas 4.54 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Heat & Glo LifeStyle 6000C. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Heat & Glo LifeStyle 6000C o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Heat & Glo LifeStyle 6000C se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Heat & Glo LifeStyle 6000C, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Heat & Glo LifeStyle 6000C debe contener:
- información acerca de las especificaciones técnicas del dispositivo Heat & Glo LifeStyle 6000C
- nombre de fabricante y año de fabricación del dispositivo Heat & Glo LifeStyle 6000C
- condiciones de uso, configuración y mantenimiento del dispositivo Heat & Glo LifeStyle 6000C
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Heat & Glo LifeStyle 6000C no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Heat & Glo LifeStyle 6000C y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Heat & Glo LifeStyle en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Heat & Glo LifeStyle 6000C, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Heat & Glo LifeStyle 6000C, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Heat & Glo LifeStyle 6000C. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 1 • DO NOT store or use gasoli ne or other am- mab le vap or s an d l iqu id s in th e v ici nit y o f t his or any other appliance. • Whattodoifyousmellgas - DO NOT try to light any appliance. - DO NOT touch any electrical switch. DO [...]
-
Página 2
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 2 ListingLabelInformation/Location Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased[...]
-
Página 3
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 3 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION![...]
-
Página 4
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 4 = Contains updated information. F . Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . . 55 G. W all Switch Installation for Fan (Optional) . . . . . . . . . . . . 55 13Finishing A. Mantel and Wall Projections . . . . . . . . [...]
-
Página 5
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 5 B. LimitedLifetimeW arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, [...]
-
Página 6
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 6 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor . A list of HHT authorized dealers is available on the HHT branded websites. • This warranty is o[...]
-
Página 7
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 7 B. T emperedGlassSpecications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous loca- tions such as bathtub enclosures as dened by the Con- sumer Product Safety Commission (CPSC). The tempered [...]
-
Página 8
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 8 E. N on-C omb us tib leMa teri als Spec icat ion Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof. Materials that are repor[...]
-
Página 9
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 9 H. Requirements for the Commonwealth of Massachusetts For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operat[...]
-
Página 10
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 10 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions. Failure to operate replace according to operating instructions could cause re or injury . D[...]
-
Página 11
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 1 1 D. ClearSpace W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these obj[...]
-
Página 12
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 12 J. BeforeLightingFireplace Before operating this replace for the rst time, have a qualiedservicetechnician : • V erify all shipping materials have been removed from inside and/or underneath the rebox. • Review proper placement[...]
-
Página 13
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 13 K. LightingInstructions(IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. W ait ve (5) minu tes to c lea r out any gas. The n smell for gas , inclu din g nea[...]
-
Página 14
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 14 L. LightingInstructions(StandingPilot) 1. T urn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel. 3. Move switch to “OFF” position. 4. Push in gas control knob slightly and turn clock- wise to [...]
-
Página 15
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 15 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 14.H. • Cl ean xed gl as s as se mb ly . S ee Se[...]
-
Página 16
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 16 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slamming [...]
-
Página 17
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 17 V enting Frequency: Seasonally By: Homeowner T oolsneeded: Protective gloves and safety glasses. • Inspect venting and termination cap for blockage or obstruc tion such plants, bird nests, leaves, snow , debris, etc. • V erify termi nat ion cap[...]
-
Página 18
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 18 Figure3.1IPIPilotFlamePatterns Figure3.2StandingPilotFlamePatterns C. Refractory ,GrateandV alve Assembly Removal It may become necessary to remove the refractory , grate and valve assemblies. This task should[...]
-
Página 19
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 19 Figure3.5V alveAssemblyRemoval NOTCH LOCA TION NG LP 6000C 6000CL 6000CLX 6000CBV 8000C 8000CL 8000CLX 8000CBV Figure3.6BurnerIdentication D. BurnerIdentication/V erication The burner may be accessed for identication a[...]
-
Página 20
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 20 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure4.1 T ypicalSyste[...]
-
Página 21
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 21 B. DesignandInstallationConsiderations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside. No additional outside air source is r[...]
-
Página 22
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 22 5 F ramingandC learances A. Selecting ApplianceLocation Whe n sele cting a locat ion for the appli anc e it is impor tan t to con sid er the requ ire d c lea ran ces to w all s ( see Fi gure 5.1 ). W ARNING! Risk of Fire or Burns! Provide ad[...]
-
Página 23
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 23 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling restops and wall sh[...]
-
Página 24
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 24 D. MantelandW allProjections W ARN IN G! Ri sk of Fir e! Co mp ly wi th al l mi nim um c le ar - an ces as spe ci ed. Fra min g or n ish ing mat eri al clo ser tha n th e min imu ms li ste d mu st be con str uc te d en tir ely of non com - bu st[...]
-
Página 25
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 25 A. V entT erminationMinimumClearances RoofPitch H(Min.)Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .................................................1.25* Over 7/12 to 8/12 .............[...]
-
Página 26
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 26 Figure6.3 MinimumClearancesforT ermination O N P R Q X = AIRSUPPL YINLET A = 12 inches.................clear ance s ab ove gra de, veranda, por ch, dec k o r b alc ony B = 12 inches.................cl ear ance to wind ow or door tha t may [...]
-
Página 27
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 27 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies DVP or SLP venting systems. Refer to Sec- tion 16B for vent component information. DO NOT mix pipe, ttings or joining methods from differ- ent manufacturers. The pipe[...]
-
Página 28
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 28 H 1 V 1 Figure7.3 T opV ent-HorizontalT ermination T opV ent-HorizontalT ermination OneElbow Note: For corner installations: A 6 inch (152 mm) section of straight pipe may need to be attached to the appliance before a 90º elbow , to[...]
-
Página 29
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 29 H 2 H 1 V 2 V 1 Figure7.5 T opV ent-HorizontalT ermination-(continued) ThreeElbows V 1 Min. H 1 Max. V 2 Min. H 2 Max. Elbow only 2 ft. 610 mm 0 in. 0 mm 1 ft. 305 mm 6 in. 152 mm 3 ft 914 mm 6 in. 152 mm 2 ft. 610 mm 1 ft. [...]
-
Página 30
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 30 EXHAUST SHIELD FLUE RESTRICTOR T opV ent-V erticalT ermination NoElbow Figure7.6 Note: If installing a vertical vent/ termination off the top of the ap- pliance, the ue restrictor should be used. V 1 V 1 =40ft.Max.(12.4m)[...]
-
Página 31
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 31 H 1 V 1 V 2 T opV ent-V erticalT ermination(continued) Figure7.1 1 T woElbows Figure7.10 4. Center the Flue Restrictor on vent and secure in place by using two self-tapping screws (see Figure 7.10). 5. Reinstall the Exhaust Shield. 3. Matc[...]
-
Página 32
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 32 Figure7.12 T opV ent-V erticalT ermination-(continued) ThreeElbows IN STALLE D HO R IZO NTALL Y H 1 H 2 V 1 V 2 V 1 H 1 +H 2 V 2 V 1 + V 2 Minimum H 1 +H 2 Maximum Elbow only 1 ft. 305 mm * * * 1 ft. 305 mm 6 in[...]
-
Página 33
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 33 H 1 RearV ent-HorizontalT ermination Figure7.14 NoElbow One45ºElbow H 1 H 1 =16in.(406mm)Maximum Do not use a 45º elbow in corner installations. Use two 90º elbows instead. Figure7.13[...]
-
Página 34
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 34 INSTALLED HORIZONTALLY H 3 H 1 H 2 V 1 RearV ent-HorizontalT ermination-(continued) T woElbows Figure7.15 Figure7.16 ThreeElbows H 1 H 2 V 1 H 1 Maximum V 1 Minimum H 2 H 1 +H 2 Maximum 1 ft. 305 mm Back to Back 90º E[...]
-
Página 35
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 35 RearV ent-V erticalT ermination OneElbow Figure7.17 T woElbows Figure7.18 H 1 V 1 IN STALLE D HO RI ZO NTALL Y H 1 H 2 V 1 V 1 Minimum H 1 Maximum 6 in. 152 mm 2 ft. 610 mm 1 ft. 305 mm 3 ft. 914 mm 2 ft. 610 mm 5 ft. 1.5 m 3 f[...]
-
Página 36
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 36 RearV ent-V erticalT ermination-(continued) ThreeElbows Figure7.19 ThreeElbows Figure7.20 INST ALLED HORIZONT ALL Y H 3 H 1 H 2 V 1 V 2 V 1 H 2 H 1 H 1 H 2 H 3 V 1 Minimum H 1 +H 2 +H 3 Maximum * * * 8 ft. 2.4[...]
-
Página 37
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 37 EXHAUST VENT PIPE INLET AIR VENT PIPE Figure7.21.Coaxial/Colinear ApplianceConnector OUTSIDE F ACE OF FIREPLACE TOP OF FIREPLACE OPENING SHADED AREA DEFINED AS “INSIDE EXISTING MASONR Y FIREPLACE” 3 IN. MIN. 5 IN. MIN. EXHAUST VENT PIPE Figure?[...]
-
Página 38
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 38 Figure7.23 EXISTING CHIMNEY HEARTH FLOOR EXISTING CHIMNEY EXHAUST AIR VENT PIPE INLET AIR VENT PIPE T o minimize cold air drafts, seal with non-combustible insulation. TERMINA TION CAP DIRECT VENT FIREPLACE V DVP-2SL COAXIAL/COLINEAR APPLIANCE CONNECTOR The fi[...]
-
Página 39
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 39 A* B* 10 in. 12 in. C D 10 in. 12 in. A. PipeClearancestoCombustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DO NOT pack insulation or other combustibles: • Between ceiling restops • Between wall shield restops • Aro[...]
-
Página 40
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 40 C. InstalltheCeilingFirestop A ceilin g restop MUST be used between oors and attics. • DVPpipeonly - Frame an opening 10 in. by 10 in. (254 mm by 254 mm) whenever t h e v e n t p e n e t r a t e s a c e i l i n g / o o r ( s e e Figu[...]
-
Página 41
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 41 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. The Na tio nal Fue l Gas Code ANSI Z22 3.1 an d NFPA 54 req uir e[...]
-
Página 42
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 42 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. T opV ent 9 A[...]
-
Página 43
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 43 B. RearV ent CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. Fig[...]
-
Página 44
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 44 Figure9.14ProperPositioningandSecuringofan Appliance NAILING TABS (BOTH SIDES) PILOT HOLES Figure9.12Non-combustibleBoard C. InstallingtheNon-combustibleBoard The fact ory supp lie d non -co mbu sti ble b oar d spa [...]
-
Página 45
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 45 1 0 Inst allingV entPi pe(D VPandSLPP ipe ) A. AssembleV entSections(DVP PipeOnly) AttachV enttotheFirebox Assembly Not e: The en d of the p ipe se cti ons w ith th e lanc ed t abs wi ll fac e toward th[...]
-
Página 46
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 46 B. AssembleV entSections(SLP PipeOnly) T o attach the rst vent component to the starting collars of the appliance: • Attach a DVP-2SL or DVP-SLP24 adapter to the starting collar of the appliance. • Lock the vent components into place by s[...]
-
Página 47
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 47 120º Figure10.8SecuringV erticalPipeSections 120º Figure10.9SecuringHorizontalPipeSections E. Di sa ss em bl e V en t S ec ti on s • Rotate either section (see Figure 10.10) so the seams on both pipe sections are [...]
-
Página 48
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 48 F . Install Decorative Ceiling Components (SLPonly) A decorative ceiling thimble can be installed on a at ceil- ing through which the vent passes. The decorative ceiling thimble is used to cover the restop. • Seal the gap between the ven[...]
-
Página 49
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 49 G. InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof. • Slide the roof ashing over the pipe sections extending through the roof as shown in Fi[...]
-
Página 50
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 50 SCREWS CAULK STORM COLLAR (1of3) Figure10.18 TERMINA TIONCAP I. InstallV erticalT erminationCap • Attach the vertical termination cap by sliding the inner collar of the cap into the inner ue of the pipe section while placing the ou[...]
-
Página 51
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 51 Figure10.20V entingthroughthewall INTERIOR HEA T SHIELD OR EXTENDED HEA T SHIELD W ALL SHIELD FIRESTOP HEA T SHIELD 1-1/2 IN. (38 MM) MIN. OVERLAP SH EA TH IN G VENT DEPTH FROM BACK OF APPLIANCE T O OUTSIDE SURF ACE OF EXTERIOR W ALL (SEE CHART [...]
-
Página 52
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 52 A. FuelConversion • Mak e sure the applian ce is comp atib le with availab le gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies specied and approved parts. B. GasPressure • Optimum a[...]
-
Página 53
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 53 Figure12.1IgnitorButton C. StandingPilotIgnitionSystemWiring • The standin g pilot ignition system wiring does not requir e a 1 10 V AC supply to operate. See Figure 12.3 • A 1 10 V AC junction box MUST be installed for use with a f[...]
-
Página 54
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 54 Figure12.2IPIWiringDiagram TO JUNCTION BOX (1 10V) MODULE FLAME SENSE IGNITER RC100 RC200 (OPTIONAL W ALL CONTROLS) GROUND ORANGE (PILOT) GREEN (MAIN) BROWN BLACK RED BA TTER Y P ACK 6V DC FLAME MODULA TION THERMOST A T WIRE ASSEMBL Y / W ALL SWITCH W[...]
-
Página 55
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 55 G. W allSwitchInstallationforFan(Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.5): • The power supply for the appliance must be brought into a switch box. • The power can then be supplied from[...]
-
Página 56
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 56 1 3 F inishing A. MantelandW allProjections W ARN IN G! Ri sk of Fi re ! Com pl y wi th a ll mi ni mu m cl ear - an ces as sp ec ie d. Fr ami ng clo ser th an th e min imu ms li st - ed mu st be c on str uct ed en tir ely of no nc om bus tib[...]
-
Página 57
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 57 Figure13.4FinishingMaterial1InchThickorLess DOOR FIT FINISHMA TERIAL THICKNESS SEE FIGURE Folio Inside Any 13.6 Arcadia Overlap 1 inch or less 13.4 Inside Greater than 1 inch 13.5 Halston Overlap 1 inch or less 13.4 Inside Greater[...]
-
Página 58
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 58 DOOR FINISHING MA TERIAL FINISHING MA TERIAL C (Includes 1/8 in. opening each side of door) A (Outside door width) Finishing material thickness, 1-4 inches maximum B = T op of door to bottom of replace. D = Bottom of Finishing Material to Bottom of Fireplace A[...]
-
Página 59
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 59 FINISHING STRIPS REMOVED Figure13.7RemovingFinishingStrips. 31-7/8 IN. (6000) 33-1 1/16 IN. (8000) 3-3/4 IN. (6000, 8000) 35-5/16 IN. (6000) 43 IN. (8000) Figure13.8.CleanFaceDoorDimensions RemovalofFinishingStrips NOTICE[...]
-
Página 60
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 60 D. ElevatedHearthSystems Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various dimensions. Some hearth systems will elevate the appliance off the oor at a given dimension. For exa[...]
-
Página 61
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 61 A. RemoveFixedGlass Assembly See Section 14.H. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox. C. Cleanthe Appliance Clean/vacuum any sawdust that may have accumulated inside the [...]
-
Página 62
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 62 G. InstalltheLog Assembly LogAssembly:LOGS-6C CAUTION: Logs are fragile, handle with care. Log #1(SR V2164-701) : Locate log placement tabs on the pilot cover . Bend tabs upward as shown in Figure 2. Locate the log placements slots on the [...]
-
Página 63
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 63 Figure7 2 3 1 Log #3 (SRV2164-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1. After slot and tab have been tted together , mate the groove located on the bottom of Log #3 with the horizontal grat[...]
-
Página 64
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 64 Models:8000C,8000C-LP ,8000C-IPI, 8000C-IPILP ,8000CBV -IPI Figure3 Figure4 GROOVES SLOTS Figure5 Figure6 1 2 1 LEFTGRA TETINE CAUTION: Logs are fragile, handle with care. Log #1 (SRV2168-701) : Locate log placement tabs [...]
-
Página 65
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 65 Figure7 2 3 1 1 2 3 4 Figure8 Figure9 Figure10 1 1 2 2 3 3 4 5 5 6 4 Log #3 (SRV2168-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1. After slot and tab have been tted together , mate the[...]
-
Página 66
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 66 Figure14.5 AirShutter Figure14.4FixedGlass Assembly H. FixedGlass Assembly W ARNING! Risk of Asphyxiation! Handle xed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, c[...]
-
Página 67
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 67 A. StandingPilotIgnitionSystem 1 5 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qua[...]
-
Página 68
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 68 T roubleshooting(continued) Symptom PossibleCause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position. T ake a reading with a millivolt meter at the thermopile terminals. The mi[...]
-
Página 69
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 69 B. IntelliFirePlus™IgnitionSystem Symptom PossibleCause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark. A. Incorrect wiring. V erify “S” wire (white) for sensor and “I” wire (orange) for ignitor [...]
-
Página 70
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 70 1 6 ReferenceMater ials A. ApplianceDimensionDiagram Di me ns ion s ar e a ct ua l ap pli an ce di me ns ion s. U se f or re fe ren ce o nl y . Fo r fra mi ng di me ns io ns an d cl ear an ce s re fer t o Sec ti on 5 . Figure16.1 Appli[...]
-
Página 71
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 71 Figure16.2 ApplianceDimensions-8000Models Location Inches Millimeters J 21 533 K 1 1-1 1/16 297 L 35-1/2 902 M 17-3/4 451 N 8-1/2 216 O 2-7/8 73 P 8-1/2 216 Q 1 25 R 42-7/8 1089 Location Inches Millimeters A 48 1219 B 43-1/[...]
-
Página 72
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 72 10-1/2 in. (267 mm) 10-7/8 in. (276 mm) 45 ° 7-3/8 in. (187 mm) 11-3/8 in. (289 mm) 1-1/4 in. (32 mm) 9-1/4 in. (235 mm) 13-1/4 in. (337 mm) 1/2 in. TYP DVP90ST (90° Elbow) 10 in. (254 mm) 10 in. (254 mm) 1 in. (25 mm) 12 in. (305 mm) 14 in. (356 mm) 1 in. (25 [...]
-
Página 73
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 73 DVP-HPC1 DVP-HPC2 DVP-TRAP1 DVP-TRAP2 DVP-HPCK1-B DVP-HPCK2-B DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The[...]
-
Página 74
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 74 13-1/4 in. (337 mm) 24-5/8 in. (625 mm) 27-1/2 in. (699 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (337 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in. (349 mm) 5 in. ( 1 2 7 m m) 13-3/4 in. (349 mm)[...]
-
Página 75
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 75 DVP-TB1 BasementVent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 7-1/4 in. 12 in. 305 mm (184 mm) 5-1/4 in. (133 mm) 12-1/2 in. (318 mm) DVP-TVHW VerticalTermination Cap (Highwind) PVK-80 (Not compatible with Intel[...]
-
Página 76
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 76 OptionalWireHarness DESCRIPTION P ARTNUMBER 10 ft. PV Wire Harness PVI-WH10 20 ft. PV Wire Harness PVI-WH20 40 ft. PV Wire Harness PVI-WH40 60 ft. PV Wire Harness PVI-WH60 80 ft. PV Wire Harness PVI-WH80 100 ft. PV Wire Harness PVI-WH100 PVI-SLP Power[...]
-
Página 77
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 77 B. V entComponentsDiagrams (continued) DVP-HRC-SS DVP-HRC-ZC-SS HORIZONT ALTERMINA TIONCAP 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in. (206 mm) 10-7/8 in. 276 mm 10-1/2 in. 267 mm 3° 87° Effective Length 5-3/4 to 8-3/8 in. 146 to 213 mm 5-1/2 in[...]
-
Página 78
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 78 B. V entComponentsDiagrams (continued) Figure16.8SLPSeriesV entComponents EffectiveHeight/Length Pipe inches mm SLP4 4 102 SLP6 6 152 SLP12 12 305 SLP24 24 610 SLP36 36 914 SLP48 48 1219 SLP6A 2 - 6 51 - 152 SLP1[...]
-
Página 79
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 79 B. V entComponentsDiagrams (continued) Figure16.9SLPSeriesV entComponents SLP-WT -BK W all Thimble-Black 26 in. 660 mm DVP-HSM-B Extended Heat Shield SLP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) Note: He[...]
-
Página 80
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 80 13 in. 330 mm 13 in. 330 mm 1-5/16 in. 34 mm 10-9/16 in. 269 mm 14 in. 356 mm 12-1/2 in. 318 mm 12 in. 305 mm SLP-CCS-BK Cathedral Ceiling Support Box-Black SLP-DCF-BK Ceiling Firestop Black SLK-SNKD Snorkel T ermination Cap SLP-TVHW V ertical T ermination Cap 13[...]
-
Página 81
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 81 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]
-
Página 82
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 82 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]
-
Página 83
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 83 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]
-
Página 84
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 84 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]
-
Página 85
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 85 ServiceParts IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dealer . Stocked atDepot[...]
-
Página 86
Heat & Glo • 6000C, 6000C-IPI, 8000C, 8000C-IPI • 2164-900 Rev . T • 9/12 86 D. ContactInformation Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo dealer , please visit www .heatnglo.com. -NOTES- __________________________________________________________[...]