Hikvision DS-6701HFI manual

User Manual of DS-6700 Series Network Audio/V ideo Encoder Netw ork Audio/V ideo Encoder U ser Manual (V1.1.0) UD.6L0202D109 8A01[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 1 Hikvision® Netw ork Digital V ideo S erver User’ s M anual This manual, as well as the software described in it, is furnished under license and may be u sed or copied only in accordance with the terms of such license. The content of this manu al is furnished for informational use only , is sub[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 2 Regulator y information FCC infor mation FCC compliance : This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea sonable protection against harmful interference when the equipment is o[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 3 Preventive and Ca utionary Tips Before connecting and operating y o ur Enco der, please be advised of th e following tips:  Ensure unit is installed in a w ell -ventilated, dust-free environment.  Keep all liquids away from the Encoder.  Please check the powe r su pply to avoid the damag[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 4 T ABLE OF CON TENTS Chapter 1 Introduc tio n ............................................................................................................. 7 1.1 Description ...................................................................................................................... 7 1.2[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 5 Chapter 7 Device C onfiguration .............................................................................................. 33 7.1 Local Configu ratio n ....................................................................................................... 33 7.2 Configuring Ti me Settings ...[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 6 8.4.5 Handling Excepti on ................................................................................................ 64 8.5 Configuring Pri vacy Mask ............................................................................................. 65 8.6 Configuring RS-232/4 85 Se ttings ......[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 7 Chapter 1 Intr oduction 1.1 Description Developed on the basis of the latest encoding technology , DS -6700 Series Audio/V ideo Encoder Server allows th e analog signal to b e digitized and then stored in hard disk or transmitted via network, capable of encoding at up to WD1(P AL: 960× 576, NTSC[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 8  One 10M/100Mbps adaptive Ethernet interface (P oE) for DS-6701/6704HFI/ HWI m odels .  One 10M/100M/1000Mbps adaptiv e Eth ernet interfa ce for DS-67 08/6716HFI/HWI and DS -6701/6704/6708/6716HFI/HWI-SA T A models.  Access ib le by multiple web browsers: I E, FireFox , Chrome and Safari[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 9 Exceptions  Exception Alarm Handling Exception alarms include network disconnect alarm, IP address conflict alarm, illegal access al arm, etc.; multiple alarm handling methods are supported, relay alar m o utput, buzzer alarm, upload to center , etc.  Exception Reboot Software watchdog capa[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 10 Chapter 2 S tructur e 2.1 Fr ont Panel DS -6701H W I/ HFI: Figure 2.1 Fr o nt P an el of DS -6701HW I/ HFI T abl e 2.1 Front P an el of DS -6701HW I/ HFI Item Description 1 POWER L ED Indicat or Light i n red when the device is pow ered on; light in oran ge when the SD car d is inserted. 2 VIDEO[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 11 DS -6704H W I/ HFI: Figure 2.2 Fr o nt P an el of DS -6704HW I/ HFI T abl e 2.2 Front P an el of DS -6704HW I/ HFI Item Description 1 POWER L ED Indicat or Light i n red when the device is pow ered on; light in oran ge when the SD car d is inserted. 2 LI N E IN 3.5mm t wo - wa y audio input inte[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 12 T abl e 2.3 F ront P anel of DS -6708/ 6716 and DS-6701/ 6704/6708/671 6-SA T A Indicator Description 1 POWER Lights i n red when the device is pow ered on. 2 ST A TUS Lights i n red when data is bei ng read from or wri tten to HDD. V alid for DS - 6708HWI/HFI-SA T A model only . 3 Tx/Rx 1. Does[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 13 DS -6704H W I/ HFI: Figure 2.6 Rear P a nel of DS -6704HWI/HFI T abl e 2.5 Rear Panel of DS-67 04HWI/HFI Item Description 1 ALARM I N Relay alarm input. 2 ALARM OUT Relay alarm output. 3 RS -232 Serial int erface for configurati on of device’ s parameters or used as transparent chann el. 4 RS [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 14 T abl e 2.6 Re a r P an el of DS-6708HWI/ HFI (-S A T A) Item Description 1 VIDEO I N BNC connector s for video input . 2 LI N E IN 3.5mm t wo - wa y audio input interface; connect t o active pick- up, micr ophone, etc. 3 AUDIO O U T 3.5mm audi o output interface; connect to audio output device,[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 15 2. 3 Alarm Connections 2. 3.1 Alarm Input Connections DS -67 00 supports the o pen/close rela y input as the alarm input mode. For th e alarm input signal not in open/close relay signal mode, please follow the connections shown as below: Alarm input connections for Emerson Alarm: Encoder Note: T[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 16 Note: The DS -6701HWI/HFI has no JJ1 relay . Please note the diff erent con nections of JJ 1 shown above. For DC load, JJ1can be safely used both in NC and NO methods, and it is recommended to use within the limit of 12V/1A. For external AC input, JJ1 m u st be open. The motherboard p rovides tw[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 17 Chapter 3 Network Parameters Configuration Purpose: If you don’t kno w the IP address of the decoder and th is is not t h e first time you use the decoder , you can u se SADP (IP finder) softw ar e or the Serial port tools to find out the IP add ress of th e decoder and to configure the IP add[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 18 Figure 3.1 Search Onl in e Device b y SADP Note: Device can be searched and display ed in the list in 15 seconds after it goes online; it will be removed from the list in 45 seconds after it goes offline.  Searc h online devices manually Y ou c an also click to ref resh the online device list[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 19 Figure 3.2 Modify Net work Paramete rs[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 20 Chapter 4 Access to DS-6700 by Client Softwar e The DS-6700 Series Audio/V ideo Encoder can be accessed b y iVMS -4200 client software (provided in attached CD). Please refer to the User Manual of iVMS-4200 Client Softwar e for more information . The computer which runs the iVMS-4200 client soft[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 21 4. 2 .1 Adding Devi ce S teps: 1. Click Contro l Pa nel>Device Managem e nt to enter the Device Management page: Figure 4.2 Device Management Page 2. Click the Add button to enter the A d d Device dialog box: Figure 4.3 Ad d Device 3. Edit a nickname for the device and then input the I P addr[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 22 Figure 4.4 Search Onl in e Devices 4. Click Add to add the device. 5. The successfully added device (s) w il l be disp lay ed on the device list. Figure 4.5 List of Ad d ed Devices 4. 2.2 S tarting Liv e V iew Click Contro l Pa nel > Main V ie w to enter the Live V iew p age:[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 23 Figure 4.6 S t art Live Vi ew Y ou can click the buttons on the toolbar to operate in the live view mode, e.g., captu re picture, start/stop recording, two-way audio, P TZ control (with P TZ camera connected to t h e encoder), digital zo om, open/close audio, play back video files, etc. Note: Pl[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 24 Chapter 5 Access to DS -6700 by W EB Br owser The DS-6700 can also be accessed by WEB Browser for configuration a nd operation. The supported W EB browsers include: Internet Explorer 6/7/8/9, Firef ox 3.5 and above, Chrome 8 and above, Safari 5 .0.2 and above , W indows XP SP1 and above (32-bit)[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 25 Figure 5.2 Downl oad and I nst all Pl ug - in (2) Click Run or Save on the pop-up wa rn ing message box. Figure 5.3 Run W e b Component s (3) Click Next on the pop-up Setup dialog box. Figure 5.4 Click Next (4) When the installation completes, click Finish to finish the installation of Web Compo[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 26 Figure 5.5 Inst all the W eb Co mponent s 5.2 Main Page After successful login, you will enter the main page automatically. Preset Setting/Calling PTZ Control Device List Window-division Live View Window Toolbar Video Parameters Settings Menu Bar Figure 5.6 Main Page Description of the live view[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 27 Chapter 6 Live V iew Live view shows you the video image getting from the connected cam era in real time. After successful login, the system will enter the live view page automatically. 6. 1 S tarting Live V iew S teps: 1. In the live view window , select a playing window by clic king the mouse.[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 28 Next page / Audio on/off / Start/S top two-w a y audio Note: Before u sing two-w a y audio function or recording with au dio , please selec t th e S tream T y pe to V ideo & Audio on Sectio n 8.2 Configuring V ideo Settings. Full-scre e n Mode Y ou can double click on the live video to sw it[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 29 Figure 6.3 RS -485 S et t ings 6. 3.1 Operating PT Z Movement In live view mode, you can use the PTZ control buttons to realize pan/tilt/zoom co ntrol of the cam er a lens. There are 8 directional buttons ( up, down, left, right, upper left, upper right, bottom left, bottom right) on the display[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 30 6. 3 .2 Setting / Calling a Preset Setting a Preset: 1. In live view mode, select a preset number from the preset list. Figure 6.5 Set a Preset 2. Use the PTZ control buttons to move the lens in the desired position. You can u se any o f the following commands: • Pan the camera t o the right o[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 31 The preset can also be used to link to the alarm input when there is alarm event occurring. Figure 6.7 PTZ Linking Please refer to Cha pter 8. 4 Co nfiguring and Handling Alarms for th e PTZ Linking settings (Remote Configuration>Alarm Settings>Alarm Input>Linkage Method). 6. 4 Configur[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 32 4. Move the slider to set th e sharpness to 0~15 and the denoising level to 0~3. The default value is 3 f or the sharpness and 1 for the denoising level. Note : Y o u can click the button to restore the default settings.[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 33 Chapter 7 Device Configuration 7.1 Loc al Configuration Click Configuration > Local Configuration to enter the Local Configuration interfac e. Figure 7.1 Lo ca l Configurat ion Configure the following settings: Proto c ol T ype: Set the protocol type of stream transmission to TCP or UDP . [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 34 7.2 Configuring T ime Settings S teps: 1. Click Rem ote Co nfiguration > Device Parameters > T i m e Settings to enter the T ime Settings interfac e: Figure 7.2 Tim e Set t i ngs 2. Select the T ime Zone. Select the T ime Zone that is closest to the device ’ s location from the drop -dow[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 35 Note : If the device is connected to a p ublic network, you should use a NTP server that has a time synchronization function, such as the server at the National T ime Center (IP Address: 210.72.145.44). If the device is set up in a more customized network, NT P software can be used to establish [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 36 2. Co nfigure the NIC settings, inc lu ding the NIC T y p e, IPv4 Address, IPv4 Subnet Mask, I P v4 De fault Gateway , and MTU settings . Note : The valid value range of MTU is 500 ~ 1500 . 3. If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP addre[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 37 S teps: 1. Click the Rem ote Configuration > Netw ork Settings > DDNS Settings to enter the DDNS Settings interface: Figure 7.9 DDNS Set tings 2. Check the Enable DDNS checkbox to enable this feature. 3. Select DDNS Type . Four different DDNS types are selectable: IPServer, DynDNS , Peanut[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 38 Figure 7. 11 IPServer Set t ing s • PeanutHull: (1) Enter User Name and Password obtained from the PeanutHull website. (2) Click Save to save the settings. Figure 7. 12 PeanutHull Set t i ngs • Hi DDNS : (1) Enter the Server Address of the Hi DDNS server: www.hik-online.com . (2) Enter the D[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 39 7.3.4 Configuring PPPoE Settings Y ou r device also allows acc es s by Point- to -Point Protocol over Ethernet (PPPoE). S teps: 1. Click the Remote Co nfiguration > Network Settings > PPPoE Settings t o enter the P PPoE settings interface: Figure 7. 14 PPPoE Set t ings 2. Check the PPPoE c[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 40 Fi gur e 7. 15 Email Set t ings (1) 3. Configure the following Email settings: Authentication (optional): If your mail server requires authentication, check this checkbox to use authentication to log in to this server and enter the login User Name and Password. SMTP Server: The SMTP Server IP ad[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 41 Figure 7. 16 Email Sett ings (2) 4. Click Save to save the Email settings. Please refer to the following sections for more inform ation : Configure alarm linking m ethod s with Send Email on Section 8. 4 .1 Configuring Motion Detecti on , Section 8. 4. 2 Configuring External Alarm Input , Sectio[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 42 Figure 7. 17 Net work Disk Set t ings 2. Enter the IP ad dress of th e Network Storage Sy stem and File Path in the text filed. 3. Select the type of Network S to rage Sy st em to IP SAN or NAS. NAS Mode: Enter the IP address of the storage device, and the default file path is /dvr/shar e , in w[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 43 Figure 7. 19 Set HDD Propert y Note s: 1. Please refer to the User Manual of IP SAN/NAS for the creation of File Path in the network management. 2. Up to 8 NAS disks or IP SAN disk can be connected to the DS -6700 . 7.3.7 Configuring SNMP Settings Simple Network Management Protocol (SNMP) is an [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 44 Figure 7. 21 SNMP Set tings (2) 5. (1 ) When the security level is set to “ auth, priv ” , you can configure the Authenti cation Algorithm and Private-key Algorithm parameters. (2) W hen the security level is set to “ no aut h, no priv ” , you can n ot configure the Authentication Algori[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 45 Figure 7. 22 QoS Set tings 2. Check the checkbox to enable the Qo S function. 3. Enter the DSCP (Diff erentiate d Services Co depoint) value for the video/audio , event/alarm and management traff ic . This va lu e is used to mark the traff ic’ s IP header . The DSCP value d efines the priority[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 46 directory . W hen the parent directory is selected, you have th e option to u se the Device Name, Device Number or Device IP for the nam e of th e directo ry ; and when the Child Directory is selected, you can u se the Camera Name or Came r a No. as the name of the directory . Upload type: T o e[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 47 7.3.11 Configuring U PnP TM Settings Purpose: UPnP ™ can permit the device s eamlessly discover th e presence of other network devices o n the network and establish functional netw ork services for data sharin g, communications, etc. If y ou w ant to use the UPnP ™ function to enable the fas[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 48 Figure 7. 26 UPnP TM Set t ings -Manual 7.3.12 Configuring HTTPS Settings Purpose: HTTPS (Hyper Text Transfer Protocol Secure) ensures the data transferred is encrypted using Secure Socket Layer (SSL) or Transport Layer Security (TLS). HTTPS provides authentication of the web site and associated[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 49 Figure 7. 27 HTTPS Sett ings T ask1 : Create the self-signed certificate (1) Click the Create button to create the following dialog box. Figure 7. 28 Create Sel f-sign ed Cert ificate (2) Enter the country , h ost name/IP , validity and other information. (3) Click OK to save the settings. T ask[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 50 Figure 7. 29 Bonjour S et t ings 2. Check the check b ox to enable the Bonjour function. 3. Edit the name o f device . The na me is shown when the device is dete ct ed by the system. Note: Only the letters, numbers and “ - ” can be contained in the name. 4. Click Sav e to save the settings. [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 51 7.3.15 Configuring Mult icast Address Purpose: The multicast address can b e config u red to realize live view for more than the maxim u m number of cameras through network. A multicast address s pan s the Class-D IP range of 224.0.0.0 to 23 9.255 .255.255. It is recommended to use the IP addres[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 52 Chapter 8 Ca mera Settings 8.1 Configuring OS D Settings 8.1.1 Configuring Displa y Settings Purpose: Y ou can customize the came ra na me and time on the screen. Steps: 1. Click the Remote Configuration >Came r a Settings > Display Settings to enter the Display Settings interface: Camera [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 53 Camera 01 12-11-2012 Tuesday 11:21:00 Figure 8.3 Adjust OSD Lo cation 7. If you want to copy th e d isplay settin gs o f the current camera to other cameras, spread the Copy to Camera panel and select the camera(s) to copy , or click Select All to select all came ras. Figure 8.4 Copy to Camera 8[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 54 Highway A Figure 8.5 T ext Ove rl ay Set t ings 6. If you want to copy the text overlay settings of the current camera to other cameras, spread the Copy to Camera panel and select the camera(s) to copy , or click Select All to select all cameras. Figure 8.6 T ext Ove rl ay Set t ings 7. Click Sa[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 55 8.2 Configuring V ideo Settings S teps: 1. Click Rem ote Configuration > Camera Settings >V ideo Settings to enter the V ideo Settings interface: Figure 8.7 V id eo S et t ings 2. Select th e camera from the drop-down list to configure. 3. Select th e S tream T y pe of the camera to Main S[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 56 panel and select the camera(s) to copy , or click Select All to select all cameras. Figure 8.8 Copy to Came ra 6. Click Save to save the above settings. 8.3 Configuring Sn ap shot Settin gs Purpose: Y ou can configure the sched uled snapsho t and event-triggered snapshot. The captured picture ca[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 57 interface. P lease refer to S tep 3 in Sectio n 8. 4 .1 Configuring Motion Detec ti on or Step 4 in Section 8. 4. 2 Configuring Exter na l Alarm Input . 3. Please refer to Section 7.3. 9 Configuring FTP Settings for more details to configure FTP parameters. 8. 4 Configuri ng and H an dli ng Alar[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 58 the live video image. Note: Y o u are allowed to draw 8 m otion detection areas in the same ima ge. (5) Click th e button to finish drawing. Y ou can click the button to clear all areas. (6) Move the sli d e bar to set the sensitivity of th e camera. Figure 8. 11 Mo t ion Detection- Area Set tin[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 59 Figure 8. 13 Motion Detect ion- Ed it Armin g Sched ul e Notes : 1. The time of each segme n t can’t be ove rlapp ed . Up to 8 segments can be configured for each day . 2. The Holiday option is available in the Schedule dropdown list when you have enabled holiday schedule in Holiday settings .[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 60 (1) Click the Linkage Method tab to enter the setting interface. (2) Select the alarming linkage method(s) including Audible W arning, Notify Surveillance Center , Send Email and Upload to FTP .  Audible Warning Trigger an audible beep when an alarm is detected. Note: The DS -6701/6704HWI and[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 61 Delay refers to the time duration that the alarm output remains in ef fect after alarm occurs. Note: If you choose Manual , you need to manually disable the alarm output. 4) Click Edit to enter the Edit Schedu l e T i m e interface. The time schedule configuration is the same as the Setting of t[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 62 Figure 8. 19 Al arm Input S et t ings-Arming T ime 3. S et the arming schedule for th e alarm in put. Refer to S tep 2 Set the Arming Schedule for Motion Detection in Section 8. 4 .1 Configuring Motion Detection. 4. Cli ck the Linkage Metho d tab to set the actions taken for the alarm input. Ref[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 63 (1) Cho ose the P TZ Linking channel. (2) Check the relative checkbox to enable Preset Calling, Patrol Calling or Pattern Calling. 6. Y ou can copy y ou r settings to other alarm inputs. 7. Cli ck Save to save the settings. 8. 4 .3 Configuring V ideo Lo ss Alarm S teps: 1. Cli ck Re mo t e Co nf[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 64 2. S elect the camera to configure the tamper -proof detection alarm . Figure 8. 22 T amp er- pro of Al arm Set t ing s 3. Cli ck check b ox of Enable T a mper -proo f . 4. S et the tamper -Proof area. P lease refer to S tep 1 Set the Motion Detection Ar ea in Chapter 8.3.1. 5. Cli ck Edit to ed[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 65 Figure 8. 23 Handling Ex c ept i ons 3. Cli ck Save to save the settings. 8. 5 Configuri ng Privacy Mask Purpose: Privacy Mask enables you to co ver certain areas on the video of the c h annel to prevent y our privacy from live viewing and recording. S teps: 1. Click Configuration>Re mo te Co[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 66 Note: Up to 4 privacy mask areas can be configured. 6. When finish ing the area setting, click th e bu tton to f in ish draw in g. Y ou can click the button to clear all of the areas y o u set without saving it. 7. Cli ck Save to save the settings. 8.6 Configuri ng RS-232/485 Settin gs 8. 6 .1 R[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 67 Figure 8. 26 RS -485 Port Set tings 2. Set the RS-485 parameters. By de fault, the Baud Rate is set as 9600, the Data Bit as 8, the Stop B it as 1 and the Parity and Flow Con trol as None. Note: The Bau d Rate, Address and P TZ Protocol parameters sho uld be exactly th e same as the parameters o[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 68 Chapter 9 Record/Capture Settings Before you st art Make sure the Encoder is connected w it h HDD (for DS-6700HWI/HFI-SA T A) or n etwork disk, and the HDD or network disk has been initialized for the first tim e to use. T wo record/capture types can be configured: Manual and Schedule d. The fol[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 69 Figure 9.2 Ed it Holid ay 3. Y ou can check the finished holida y settings on the list. 4. Rep eat the sam e st eps to edit other holidays. Up to 32 holidays can be configured. Figure 9.3 List of Holid ay s Note : The Holiday option is available in the Schedule dropdown list when you have enable[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 70 Figure 9.4 Sched ul e Set t i ngs Interface 5. Click Edit to enter the Edit Schedule interface. 6. Choose the day in a week to configure scheduled record/capture. Figure 9.5 Edit Sched ul e 1) Configure All Day or Customized period record/capture:  If you want to con figure the all-day rec o [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 71 Tim e and End T i m e of each p eriod. Note: The time of each period can’t be overl apped. Up to 8 periods ca n be configured . 2) Select a Record T ype or Capture T ype . The record/capture type ca n be Normal, Motion, Alarm , Motion & Alarm, and Motion | Alarm.  Normal If you selec t [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 72 8. If you want to copy th e d isplay settin gs o f the current camera to other cameras, spread the Copy to Camera panel and select the camera(s) to copy , or click Select All to select all cameras. Figure 9.7 Copy to Camera 9. Click Save to validate the above settings.[...]

User Manual of DS-6700 Series Network Audio/V ideo Encoder Chapter 10 Playback Purpose: The recorded video files can be rem otel y playe d back through the W EB bro wser . S teps: 1. Click Playback on the menu bar to enter playback interface: Figure 10.1 Pl ayback P ag e 2. Click the camera from the device list for play back. 3. Select the date fro[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 74 Figure 10.3 Pl ayback P ag e 5. Use the buttons on the toolbar to operate in playback mode Figure 10.4 Pl ayback T oolbar T abl e 10.1 D escription of T oolbar Button Operation Button Operation Select window-division mode / Play/Pause Stop play in g Slow forward Fast forward Play by single frame[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 75 Chapter 1 1 Ma naging User Accounts Click Remote Configuration > Remote Configuration > User M anagem e nt to enter th e User Information interface: Figure 11.1 U ser Information Interf a ce The admin user is allowed to create normal users. And up to 31 users can be created. . 1 1.1 Adding[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 76 • User : The Guest user has permission of Local Log Search in Local Configuration, Remote L o g Search in Remote Configuration and only has the local/rem o te playback in the Cam era Con figuration. 4. Co nfigure the user permissions for th e created user account , including the Basic Permissi[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 77 11 .3 Deleting a User S teps: 1. Select a user account from the list on the User Inform ation interfa c e to be deleted. 2. Click Delete , and the informa ti on box will pop up: Figure 11.5 Del e te a U ser 3. Click OK to delete the selected user account.[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 78 Chapter 1 2 Log Search and Maintenance 12.1 Log Sear ch Purpose The operation, alarm, ex c eption and information of the device can be stored in log files, w hi ch can be view ed and exported at any time . Before you st art The Log function can be realized only w hen the Encoder is connected w i[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 79 12.2 V iewing Device Information Click Remote Configuration > Device P arameters > Device Information to enter the Device Information interface of the encoder: Figure 12.2 Device Informat i on Y ou c an edit the Device Name an d Dev ice No., and view th e d evice information, including Mo [...]

User Manual of DS-6700 Series Audio/V ideo Encoder 80 Figure 12.3 Maintenance Page 12.3.1 Re starting the Device On the Maintenance> Reboot interface, click Re boot to enter the following message box: Figure 12.4 Re boot the Device Click OK to reboot the device or Cancel to cancel the operation . 12.3.2 Restoring Default Settings On the Maintena[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 81  By selecting the Restore button, the d evice restores the default settings for the parameters excep t the IP address, subnet mask, gateway and port.  By selecting the Default button, the device restores the default settings f or all parameters. On the pop-up message box, click OK to resto[...]

User Manual of DS-6700 Series Audio/V ideo Encoder 82 Chapter 13 FAQ  Why cannot ping the Encoder? Please refer to Chapter 3 to configure the device ’ s IP bein g in t h e same segm ent as your PC, and check th e cable and switch.  Why the transpar e nt channel has been s et, but the encoder still cannot r eceive data? 1. Check if RS-232 ha[...]