Hisense Group PDP4211EU manual

Part No: IES050148[...]

This is an IEC safety class I product and must be grounded for safety. SAFETY CLASS WELCOME TO THE BRIGHT VIVID OF PLASMA DISPLA Y TV AND WORLD Dear customer, Thank you for purchasing this Plasma Display TV . We wish you many years of viewing pleasure. The goal of this manual is to guide you through setting up and operating your TV as quickly as po[...]

Important Safety Instructions -1- To prevent fire or shock hazard, do not expose this appliance to rain or moisture. Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects ,such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it [...]

-2- Learning about your new TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV. Note: The above figures are for reference only , please refer to the actual units to determine their appearance. Front [...]

-3- Learning about your new TV Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Do not use this TV near water. For example, do not use near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.The P[...]

Plasma TV Scart cable (not supplied) Scart cable (not supplied) Scart Input S c ar t O u t pu t Connecting your TV NOTE: 1) As some input terminals are internally connected, they must NOT be used at the same time. See the following pairs: Video input of Scart 1 26 == AV Video input 9 , S-Video input of Scart 2 27 == S-Video input 10 , 2) The Video/[...]

Connecting your TV T o enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consult your local de[...]

Menu TV/AV VOL CH Preparing the remote control for use Using the remote control Note: 1.Dispose of your batteries in a designated disposal area. Do not throw your batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartm[...]

Learning about the remote control Using the remote control Note: The above figures are for reference only , please refer to the actual units to determine their appearance. Channel number: direct channel selection Recall: Return to the previous channel Display: Display current channel number or input mode Menu: Call up the main menu Channel up/down [...]

Basic Operations Understanding the TV features Power ON/OFF Signal source selection POWER INDICATOR 1. Connect the TV to power outlet, the power indicator will 2. Press the POWER button on the remote control to turn off the TV temporarily . 3. If you decide to shut off the TV for a long time, it is recommended that you unplug the power from the out[...]

You can select the picture mode from among three preset modes and one user-set mode. Press the [P .mode] button repeatedly to select the desired picture mode. Select picture modes Select sound modes Soft Bright P.mode User Speech Music S.mode Standard User Nature Using the TV features Adjust V olume When Menu is not displayed on the screen, press t[...]

Using the TV features 1) Press the [Menu] button to enter the main Menu. 2) Press the button to select the item CHANNEL, and press the to enter CHANNEL Menu. 3) Press the button to select AUTO-SEARCH. 4) Press the button to start auto-searching. [CH+/CH-] [ Vol+ ] [CH+/CH-] [ Vol+/V ol- ] AUTO-SEARCH 1) Press the [Menu] button to enter the main Men[...]

Using the TV features Using the SOUND Menu Adjust sound settings 1) Press the [Menu] button to enter the main Menu. 2) Press the button to select the item SOUND, and press the to enter SOUND Menu. 3) Press the button to select the item you want to adjust. 4) Press the button to adjust the level. 5) The adjusted data is stored automatically in the u[...]

-12- BLACKSCREEN 1) Press the Menu button to enter the main Menu. 3) Press the button to select the item BLACKSCREEN. 4) Press the button to switch between on and off. NOTE: When you enable the black screen, the screen will turn into black screen saver mode in case of no incoming signal. he TV will turn into stand-by mode. 2) Press the [CH+/CH-] bu[...]

Using the TV features C.C.B (change channel blackscreen) 1) Press the Menu button to enter the main Menu. 2) Press the button to select the item FUNCTION, and press the button to enter FUNCTION Menu. 3) Press the button to select the item C.C.B. 4) Press the button to switch between on and off. NOTE: When you enable C.C.B, the screen will keep blac[...]

HOLD Some TELETEXT information is contained on more than one page, the pages automatically changing after a given reading time. Press [S-VIDEO] button to stop the page changing. Press [S-VIDEO] button again to allow the page to change. TIME Time information is contained in the teletext broadcast. In TV mode, press [TIME] to display the time. The di[...]

Specifications RF system: B/G, D/K, I, L/L Colour system: PAL, SECAM, NTSC(only for AV) Channel coverage: VHF Low channel (VL) = 48.25 to 160.00 MHz VHF high channel (VH) = 160.00 to 442.00 MHz UHF channel( U)= 442.00 to 863.25 MHz Power supply: AC 100~240V, 50/60Hz Power consumption : 390W Audio output: 7W+7W Connection interface: RF input: 1 CA T[...]

Scart connector Appendix See Signal Source Selection on page 8 for selecting SCART input. -16-[...]

Appendix -17-[...]

Appendix -18- Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on No picture, no sound No sound, pi cture OK Poor sound, p icture OK Poor picture, sound OK Unable t o s elect a c ertain channel Poor colour or no [...]

1. If the TV is to be desktop mounted, a. Fasten two aluminum brackets to the plastic mounting base using six ST4*16C bolts as shown in fig.2. b. Insert the brackets into the aluminum holder at bottom of the TV . c. Place the TV upright, and then fasten the TV to the stand from backside using two M4*35 bolts. 2. If you want to fit the loudspeakers [...]

PDP W all-mounting Bracket Installation Guide Read carefully before installation! The installation guide should be retained for future reference. Caution: 1. T o avoid mistakes or hazards, do NOT attempt to install the TV by yourself. Refer all installation to qualified servicing personnel. 2. Do NOT install the TV on a sloping wall that makes the [...]

-21- Appendix[...]