Hitachi CP-S830W/E manual

ENGLISH This Liquid Crystal Projector can display various computer signals and NTSC/P AL/SECAM video signals. Outline (1) High brightness A highly efficient optical system with a UHB lamp ensures high brightness. (2) High resolution Three separate high-definition liquid crystal panels are used for the R, G and B signals. (3) Compact size, light wei[...]

As these colours may not correspond with the coloured makings identifying the terminals in your plug, proceed as follows: The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Green and Yellow. The wire coloured Blue must be connected t[...]

3 ENGLISH Before use Examples of illustrated marks (Before Use) Illustrated marks Various illustrated marks are used in this product and instruction manual so the product is used correctly and safely, and also to protect you and others from danger and your property from being damaged. This shows that a person could be killed or injured if the wrong[...]

W arning 4 If any abnormality occurs. · When there is an abnormal smell or smoke, if you use this unit as it is, this could cause a fire or electric shock, etc. When an abnormality is found, immediately turn off the power switch and pull out the power plug from the power outlet. Check that there is no smoke, etc., then contact your dealer to repai[...]

· If the cord is damaged (core wire is exposed, disconnected, etc.), ask your dealer to replace it. It may cause a fire, electric shock, etc. · Check that no dirt adheres to the power plug and fully insert without any play. If dirt adheres or the connection is incomplete, it may cause a fire, electric shock, etc. · The outer shield of power cord[...]

6 Do not place this unit where it gets hot. Be careful since if you place the unit outdoors, in a place exposed to direct sunlight or near a heating device, the cabinet and parts could be affected. Cleaning the lens. To clean the lens, use a generally- available lens cleaning tissue (used for cleaning lens of camera, glasses, etc.). Be careful not [...]

7 ENGLISH Main unit Lens Speaker Speaker Remote control sensor · Use the remote control transmitter within the range of about 16 feet from the remote control sensor and within 30 ° to both the left and right. Cooling fan (exhaust) Names and functions of each part Handle ON indicator This blinks in the standby mode and lights in the operation mode[...]

8 Names and functions of each part (continued) RGB input terminal D-sub 15pin shrink terminal(1/2) VIDEO input terminal (on video-equipped models only) S-VIDEO input terminal Mini DIN 4pin connector(1/2) VIDEO input terminal RCA Jack(1/2) AUDIO L/R input terminal RCA Jack(1/2) AC IN socket Connect the provided power cord. MAIN POWER switch Main pow[...]

9 ENGLISH Remote control transmitter MENU STICK SWITCH When menu screen is being displayed, an adjustment item can be selected and adjustment can also be done using this switch. (See page 14) When menu screen is not displayed, this switch can move mouse cursor and also can work as left click. (See page 21) While pressing POSITION button, picture ca[...]

10 Caution Cautions on use of batteries · Do not use batteries not specified for this unit. Also do not use old and new batteries together. It may cause a fire, injury due to burst of battery or liquid leakage. · When inserting batteries, pay attention to the direction of the and polarity indications and insert the batteries correctly. If the pol[...]

Please basically use liquid crystal projector at the horizontal position. If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and become the cause of damage. Be especially careful not to install it with ventilation holes blocked. 11 ENGLISH Determin[...]

12 7 Press the INPUT button or the INPUT SELECT (VIDEO or RGB) button to select the source of the signal to be projected on the screen. · The selected signal input is displayed at the bottom right of the screen for 3 seconds. Power on all connected equipment. The method of connecting various equipment, see on the page 18~26. T urn the MAIN POWER s[...]

13 ENGLISH Basic operations (continued) · To reduce temperature inside the projector (cooling down), fan will rotate for about 1 minute after the lamp is turned off. · Do not turn off the MAIN POWER switch during the lamp on because the lamp is damaged. Press the ST ANDBY/ON button, for 1 second. · The ON indicator lights up orange and the lamp [...]

14 Press the MENU ( ) buttons or the MENU ON / OFF button. · On-screen menus are displayed on the screen. 1 Select the menu to be adjusted using the MENU ( ) buttons or MENU STICK SWITCH. · Menu displayed in green is selected. 2 Select the item to be adjusted using the MENU ( ) buttons or MENU STICK SWITCH. · Item displayed in green can be adjus[...]

15 ENGLISH RGB signal input VIDEO signal input The menu SET UP serves for the change of parameters influencing the picture and for the move picture position. Adjustments and functions (continued) · When start up screen is displayed (''NO INPUT IS DETECTED'' or ''SYNC IS OUT OF RANGE'' is displayed), SETUP me[...]

16 Adjustments and functions (continued) The menu INPUT serves for the selection of input source. The menu IMAGE serves of the picture inversion. SETUP INPUT IMAGE OPT. MESSAGE TURN ON TURN OFF SETUP INPUT IMAGE OPT. MIRROR BLANK REVEAL MESSAGE SETUP INPUT IMAGE OPT. BLANK WHITE BLUE BLACK SETUP INPUT IMAGE OPT. REVEAL FAST MEDIUM SLOW SETUP INPUT [...]

17 ENGLISH The menu OPT. allows you to control communication function etc. Adjustments and functions (continued) SETUP INPUT IMAGE OPT. COM. SPEED COM. BITS TIMER LANGUAGE AUTO OFF START UP SETUP INPUT IMAGE OPT. 7N1 8N1 COM. BITS SETUP INPUT IMAGE OPT. 1200 2400 4800 9600 19200 COM. SPEED (bps) SETUP INPUT IMAGE OPT. LANGUAGE ENGLISH FRAN‚AIS DE[...]

18 1. Input / output signal Connection to the RGB signal terminal 2. Signal input / output terminal 51 10 6 15 11 D-sub 15pin shrink terminal (Female) 1. Input signal Connection to the video signal terminals 2. Signal input terminal Ground Luminance signal S VIDEO input (Mini DIN4 pin) Ground Chrominance signal Caution Video input signal terminals [...]

19 ENGLISH 3. Example of computer signal Note 1: Signal mode Note 2: MAC adapter is necessary to the resolution mode. Projector is compatible with 13 inch mode and 16 inch mode. MAC13"mode=switch 1, switch 5 and switch 6 are ON. MAC16"mode=switch 2, switch 5 and switch 6 are ON. Note 3:Display mode Connection to the RGB signal terminal(co[...]

20 4. Initial set signals The following signals are initially set. The settings may be different depending on the computer type. In this case, adjust the settings referring to pages 14, 15. Connection to the RGB signal terminal(continued) Back porch(b) Back porch(b) DATA HSYNC DATA VSYNC Sync.(a) Front porch(d) Active(c) Sync.(a) Front porch(d) Act[...]

21 ENGLISH 1. Control signal terminal Connection to the control signal terminal 2. Mouse emulation 5 1 10 6 15 11 D-sub 15pin shrink terminal (Male) Caution Turn off the power of both the projector and computer before connecting. Connect the computer to the control terminal of the projector using an appropriate cable. Refer to the instruction manua[...]

22 Connection to the control signal terminal (continued) PS/2 mouse ADB (Mac) mouse Serial mouse 2 1 4 3 6 5 2 1 4 3 6 5 8 7 10 9 12 11 14 13 15 XA,CLK,SD A T A XB,D A T A SW -L,SEL0 SW -R,SEL1 READ Y GND +5V D ATA GND +5V CLK TDM YA YB RDP TDP 2 1 4 3 6 5 2 1 4 3 8 7 10 9 12 11 14 13 15 XA,CLK,SD A T A TDM SW -R,SEL1 GND +5V D ATA GND +5V ( POWER [...]

23 ENGLISH Connection to the control signal terminal (continued) 3. Communication (1) Connect the projector and computer using RS 232C cable. (2) Turn off the computer and after computer is setting up, turn on the projector. (3) Select the data speed (COM.SPEED) and the data format (COM.BITS) of the projector. (See page 17) (4) Start communication.[...]

24 Connection to the control signal terminal (continued) Control data table Caution If computer sends the undefined command code or data code, Projector can not guarantee operation. Command is consisted of 2 command bytes and following data bytes. 1-st byte indicates the kinds of commands and the length of command. '0xH' : Error-reply Pro[...]

25 ENGLISH The procedure of getting the Projector status (1)Computer sends the command '20H'+'yyH' to Projector. (2)Projector reply the command '1xH'+'yyH'+data bytes. The procedure of setting the Projector status (1)Computer sends the command '3xH'+'yyH'+data bytes. (2)Projector changes i[...]

INPUT S-VIDEO VIDEO AUDIO L R 1 1 1 2 2 2 RGB IN AUDIO IN OUT RGB OUT CONTROL 1 2 12 26 Example of system setup Connecting various equipment. AC Inlet Computer(Desk type) Computer (Note type) VTR with S-VHS out (video model only) VTR, etc. (video model only) CRT Display Audio amplifying equipment Caution · Turn power off to all devices before conn[...]

27 ENGLISH Clean the air filter about every 100 hours or when " CHECK THE AIR FLOW " is displayed. Cleaning the air filter T urn the main power switich off and disconnect the power plug from the power outlet. 1 Remove the air filter from the bottom. 2 Clean the air filter using a vacuum cleaner . · When air filter is very dirty, wash it [...]

28 Lamp Light source lamp has a service life. The picture will become dark or color will be poor when the lamp is used for a long time. If usage of lamp is continued in such cases, it could cause a malfunction. Replace lamp with new one. As reference for replacement time, indicator will operate or message will be displayed when the power is turned [...]

29 ENGLISH Install the lamp cover and fix it using screws. · To prevent burn, install the lamp cover and secure it using screws. · When the lamp cover is out of place, the power does not turn on. Before you turn on the power, make sure to attach the lamp cover and fix it with the scrcws. 5 Lamp (continued) Please carry out the following operation[...]

30 Check the following again before asking for service. If the trouble cannot be recovered, consult your dealer. When you think something wrong A bright dot may be seen in the picture. This is a phenomenon peculiar to the liquid crystal and is not a problem. Message table (continued) The ON indicator, LAMP indicator and TEMP indicator will light or[...]

31 Specifications All dimensions shown in inches. ∑ All specifications are subject to change without notice. Dimension diagram 31 Specifications All dimensions shown in inches. ∑ All specifications are subject to change without notice. Dimension diagram 31 Specifications All dimensions shown in inches. ∑ All specifications are subject to chan[...]