Honda 2009 Element manual

Congratulations! Your selection of a 2009 Honda Element was a wise investment. It will give you years of driving pleasure. One of the best ways to enhance the enjoyment of your new vehicle is to read this manual. In it, you will learn how to operate its driving controls and convenience items. Afterwards, keep this owner's manual in your vehicl[...]

California Proposition 65 Warning WARNING: This product contains or emits chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Event Data Recorders This vehicle is equipped with one or more devices commonly referred to as event data recorders. These devices record front seat belt use, front passen[...]

Your safety, and the safety of others, is very important. And operating this vehicle safely is an important responsibility. To help you make informed decisions about safety, we have provided operating procedures and other information on labels and in this manual. This information alerts you to potential hazards that could hurt you or others. Of cou[...]

Your Element has higher ground clearance than a passenger vehicle designed for use only on pavement. Higher ground clearance has many advantages for off-highway driving. It allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier. These advantages come at some cost. Becau[...]

200 9 Element Online Reference Owner's Manual Contents Owner's Identification Form Introduction ..................................................... ............................................................................... . ......... .... ........ i A Few Words About Safety .........................................................[...]

Contents A convenient reference to the sections in this manual. Your Vehicle at a Glance A quick reference to the main controls in your vehicle. Driver and Passenger Safety Important information about the proper use and care of your vehicle's seat belts, an overview of the supplemental restraint system, and valuable information on how to prote[...]

ꭧ : If equipped POWER DOOR LOCK SWITCH (P. 80 ) POWER WINDOW SWITCHES (P. 92 ) HOOD RELEASE HANDLE (P. 200 ) A/T model with navigation system is shown. AUTOMATIC TRANSMISSION (P. 219 ) MANUAL TRANSMISSION (P. 217 ) PARKING BRAKE (P. 94 ) HEATING/COOLING CONTROLS (P. 104 ) PASSENGER'S FRONT AIRBAG (P. 9 , 25 ) DRIVER'S FRONT AIRBAG (P. 9[...]

ꭧ 1: To use the horn, press the center pad of the steering wheel. ꭧ 2: If equipped ꭧ 3: Only on vehicles equipped with navigation system. Refer to the navigation system manual. HEADLIGHTS/TURN SIGNALS (P. 71 ) REMOTE AUDIO CONTROLS ꭧ 2 (P. 191 ) A/T model with navigation system is shown. STEERING WHEEL ADJUSTMENT (P. 74 ) CRUISE CONTROL BUT[...]

This section gives you important information about how to protect yourself and your passengers. It shows you how to use seat belts. It explains how your airbags work. And it tells you how to properly restrain infants and children in your vehicle. Important Safety Precautions ............. 6 Your Vehicle's Safety Features .......... 7 Seat Belt[...]

You'll find many safety recommendations throughout this section, and throughout this manual. The recommendations on this page are the ones we consider to be the most important. Always Wear Your Seat Belt A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even thou[...]

Your vehicle is equipped with many features that work together to protect you and your passengers during a crash. Some features do not require any action on your part. These include a strong steel framework that forms a safety cage around the passenger compartment, front and rear crush zones, a collapsible steering column, and tensioners that tight[...]

Seat Belts Your vehicle is equipped with seat belts in all seating positions. Your seat belt system also includes an indicator on the instrument panel and a beeper to remind you and your passengers to fasten your seat belts. Why Wear Seat Belts Seat belts are the single most effective safety device for adults and larger children. (Infants and small[...]

Airbags Your vehicle has a supplemental restraint system (SRS) with front airbags to help protect the heads and chests of the driver and a front seat passenger during a moderate to severe frontal collision (see page 25 for more information on how your front airbags work). Your vehicle also has side airbags to help protect the upper torso of the dri[...]

The most important things you need to know about your airbags are: ● Airbags do not replace seat belts. They are designed to supplement the seat belts. ● Airbags offer no protection in rear impacts, or minor frontal or side collisions. ● Airbags can pose serious hazards . To do their job, airbags must inflate with tremendous force. So while a[...]

Introduction The following pages provide instructions on how to properly protect the driver, adult passengers, and teenage children who are large enough and mature enough to drive or ride in the front. See pages 35 － 51 for important guidelines on how to properly protect infants, small children, and larger children who ride in your vehicle. 1. Cl[...]

The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest. In addition to adjusting the seat, you can adjust the steering wheel up and down (see page 74 ). If you cannot get far enough away from the steering wheel and still r[...]

Reclining the seat-back too far can result in serious injury or death in a crash. Adjust the seat-back to an upright position, and sit well back in the seat. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sli[...]

5. Fasten and Position the Seat Belts Insert the latch plate into the buckle, then tug on the belt to make sure the belt is securely latched. Check that the belt is not twisted, because a twisted belt can cause serious injuries in a crash. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of th[...]

Never place the shoulder portion of a lap/shoulder belt unde r your arm or behind your back. This could cause very serious injuries in a crash. If a seat belt does not seem to work properly, it may not protect the occupant in a crash. No one should sit in a seat wi th an inoperative seat belt. Using a seat belt that is not working properly can resu[...]

Advice for Pregnant Women If you are pregnant, the best way to protect yourself and your unborn child when driving or riding in a vehicle is to always wear a seat belt, and keep the lap part of the belt as low as possible across the hips. When driving, remember to sit upright and adjust the seat as far back as possible while allowing full control o[...]

● Do not put any accessories on seat belts. Devices intended to improve occupant comfort or reposition the shoulder part of a seat belt can reduce the protective capability of the belt and increase the chance of serious injury in a crash. ● Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on[...]

Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all four seating positions. The front seat belts are also equipped with automatic seat belt tensioners. This system uses the same sensors as the front airbags to monitor whether the front seat belts are latched or unlatched, and how much weight is on the front passeng[...]

Lap/Shoulder Belt The lap/shoulder belt goes over your shoulder, across your chest, and across your hips. To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page 14 for how to properly position the belt). To unlock the belt, press the red PRESS button on the buckle. Guide the bel[...]

Automatic Seat Belt Tensioners For added protection, the front seat belts are equipped with automatic seat belt tensioners. When activated, the tensioners immediately tighten the belts to help hold the driver and a front passenger in position. The tensioners are designed to activate in any collision severe enough to cause the front airbags to deplo[...]

If a seat belt is worn during a crash, it must be replaced by your dealer. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced[...]

Airbag System Components (12) (1) (3) (5) (6) (10) (4) (14) (15) (7) (4) (5) (11) (10) (13) (2) (9) (8) (1) Driver's Front Airbag (2) Passenger's Front Airbag (3) Control Unit (4) Front Seat Belt Tensioners (5) Side Airbags (6) Driver's Seat Position Sensor (7) Front Passenger's Weight Sensors (8) Front Impact Sensors (9) Passen[...]

Your airbag system includes: ● Two SRS (supplemental restraint system) front airbags. The driver's airbag is stored in the center of the steering wheel; the front passenger's airbag is stored in the dashboard. Both are marked ‘‘ SRS AIRBAG ’’ (see page 25 ). ● Two side airbags, one for the driver and one for a front passenger.[...]

● Automatic front seat belt tensioners (see page 20 ). ● Sensors that can detect a moderate to severe front impact, side impact, or rollover. ● Sensors that can detect whether a child is in the passenger's side airbag path and signal the control unit to turn the airbag off (see page 29 ). ● Sensors that can detect whether the driver&ap[...]

How Your Front Airbags Work If you ever have a moderate to severe frontal collision, sensors will detect the vehicle's rapid deceleration. If the rate of deceleration is high enough, the control unit will instantly inflate the driver's and front passenger's airbags, at the time and with the force needed. During a frontal crash, your [...]

The total time for inflation and deflation is one-tenth of a second, so fast that most occupants are not aware that the airbags deployed until they see them lying in their laps. After a crash, you may see what looks like smoke. This is actually powder from the airbag's surface. Although the powder is not harmful, people with respiratory proble[...]

Advanced Airbags Your front airbags are also advanced airbags. The main purpose of this feature is to help prevent airbag- caused injuries to short drivers and children who ride in front. For both advanced airbags to work properly: ● Occupants must sit upright and wear their seat belts properly. ● Do not spill any liquids on or under the seats,[...]

When the airbag is turned off, a ‘‘ passenger airbag off ’’ indicator in the center of the dashboard comes on (see page 32 ). If the weight sensors detect there is no passenger in the front seat, the airbag will be off. However, the passenger airbag off indicator will not come on. To ensure that the passenger's advanced front airbag sy[...]

Only one airbag will deploy during a side impact. If the impact is on the passenger's side, the passenger's side airbag will deploy even if there is no passenger. To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats. Side Airbag Cutoff System Your [...]

How Your Side Curtain Airbags Work In a Side Impact In a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate the side curtain airbag and activate the seat belt tensioner on the driver's or the passenger's side of the vehicle. If the impact is on the passenger's side,[...]

How the SRS Indicator Works The SRS indicator alerts you to a potential problem with your airbags or seat belt tensioners. When you turn the ignition switch to the ON (II) position, this indicator comes on briefly then goes off. This tells you the system is working properly. If the indicator comes on at any other time, or does not come on at all, y[...]

How the Side Airbag Off Indicator Works U.S. Canada This indicator alerts you that the passenger's side airbag has been automatically shut off. It does not mean there is a problem with your side airbags. When you turn the ignition switch to the ON (II) position, the indicator should come on briefly and then go off (see page 59 ). If it doesn&a[...]

If the indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there, something may be interfering with the weight sensors. Look for and remove: ● Any items under the front passenger's seat. ● Any object(s) hanging on the seat or in the seat-back pocket. ● Any object(s) touching the rear of the[...]

Additional Safety Precautions ● Do not attempt to deactivate your airbags. Together, airbags and seat belts provide the best protection. ● Do not tamper with airba g components or wirin g for any reason. Tampering could cause the airbags to deploy, possibly causing very serious injury. ● Do not expose the front passenger's seat-bac k to [...]

Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to properly protect child passengers. If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small[...]

All Children Should Sit in a Back Seat According to accident statistics, children of all ages and sizes are safer when they are restrained in a back seat. The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting wher[...]

To remind you of the passenger's front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels. U.S. Models DASHBOARD Canadian Models SUN VISORS SUN VISORS Protecting Children －[...]

If You Must Drive with Several Children Your vehicle has two back seats where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front: ● Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page 49 ). ● Move the vehicl[...]

Additional Safety Precautions ● Never hold an infant or child on your lap. If you are not wearing a seat belt in a crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed. ● Never put a seat belt over yoursel[...]

Protecting Infants Child Seat Type An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker's weight or height limit for the seat, and the child is at least one year old. Only a rear-facing child seat provides proper support for a baby's head, neck, and back. Two types of seats ma[...]

In any of these situations, we strongly recommend that you install the child seat directly behind the front passenger's seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat. Placing a rear-facing child seat in the front seat can result in serious injury or death during [...]

Even with advanced front airbags that automatically turn the passenger's front airbag off (see page 32 ), a back seat is the safest place for a small child. If it is necessary to put a forward- facing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and t[...]

3. The child seat should fit the veh icle seating position (or positions) where it will be used. Before purchasing a conventional child seat, or using a previously purchased one, we recommend that you test the seat in the specific vehicle seating position or positions where the seat will be used. Installing a Child Seat After selecting a proper chi[...]

Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (lower anchors and tethers for children) at the rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anch[...]

Other LATCH-compatible seats have a flexible-type connector as shown above. 4. Whatever type you have, follow the child seat maker's instructions for adjusting or tightening the fit. 5. Remove the head restraint (see page 85 ). Make sure the removed head restraints are secured in the cargo area, and reinstalled when the child seat is removed. [...]

8. Attach the tether strap hook to the tether anchor, then tighten the strap as instructed by the child seat maker. If the tether strap is too long and cannot be tightened firmly, find a route where the strap can be tightened securely. 9. Push and pull the child seat forward and from side-to-side to verify that it is secure. Installing a Child Seat[...]

2. To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor. 3. After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these ste[...]

Installing a Child Seat with a Tether A child seat with a tether can be installed in either back seat, using one of the anchor points shown above. Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available. 1. After securing the child seat in the desired po[...]

When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear a lap/shoulder belt. The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must[...]

Using a Booster Seat A child who has outgrown a forward- facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster. Some states, Canadian provinces and territories also require children to use a booster seat until they reach a given age or weight (e.g., 6 years or 60 lbs).[...]

Of course, children vary widely. And while age may be one indicator of when a child can safely ride in front, there are other important factors you should consider. Maturity To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride. Physical Size Physically, a[...]

Your vehicle's exhaust contains carbon monoxide gas. Carbon monoxide should not enter the vehicle in normal driving if you maintain your vehicle properly and follow the information on this page. Have the exhaust system inspected for leaks whenever: ● The vehicle is raised for an oil change. ● You notice a change in the sound of the exhaust[...]

These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully. If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement. U.S. models only Canadian models U.S. models S[...]

HOOD U.S. models Canadian models RADIATOR CAP DOORJAMBS U.S. models Canadian models Safety Labels 54 2009 Element[...]

This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach. Control Locations .......................... 56 Instrument Panel .......................... 57 Instrument Panel Indicators .......... 58 Gauges .....................................[...]

ꭧ : If equipped VEHICLE STABILITY ASSIST (VSA) OFF SWITCH (P. 231 ) PARKING BRAKE (P. 94 ) AUDIO SYSTEM (P. 109 ) HEATING/COOLING CONTROLS (P. 104 ) A/T model with naviga tion system is shown. POWER DOOR LOCK SWITCH (P. 80 ) MIRROR CONTROLS (P. 93 ) POWER WINDOW SWITCHES (P. 92 ) INSTRUMENT PANEL (P. 57 ) HOOD RELEASE HANDLE (P. 200 ) GAUGES (P. [...]

ꭧ : The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text. DRL DAYTIME RUNNING LIGHTS INDICATOR (P. 60 ) HIGH BEAM INDICATOR (P. 61 ) CHARGING SYSTEM INDICATOR (P. 58 , 295 ) VEHICLE STABILITY ASSIST (VSA) INDICATOR (P. 62 ) VSA OFF INDICATOR (P. 62 ) ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR (P. 59 ) LOW OIL [...]

The instrument panel has many indicators that give you important information about your vehicle. Malfunction Indicator Lamp For more information, see page 296 . Low Oil Pressure Indicator The engine can be severely damaged if this indicator flashes or stays on when the engine is running. For more information, see page 295 . Charging System Indicato[...]

If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page 18 . Supplemental Restraint System Indicator This indicator comes on briefly when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indica[...]

Immobilizer System Indicator This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will then go off if you have inserted a properly coded ignition key. If it is not a properly coded key, the indicator will blink, and the engine will not start (see page 76 ). This indicator also blinks several times [...]

Lights On Indicator This indicator reminds you that the exterior lights are on. It comes on when the light switch is in either the or position. If you turn the ignition switch to the ACCESSORY (I) or LOCK (0) position without turning off the light switch, this indicator will stay on. A reminder chime will also sound when you open the driver's [...]

Vehicle Stability Assist (VSA) System Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position and when the ignition switch is turned to the START (III) position. It flashes when VSA is active (see page 230 ). If it comes on and stays on at any other time, or it does not come on when you[...]

Tire Pressure Monitoring System (TPMS) Indicator This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If this indicator comes on and stays on at any other time, or if it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the TPMS; the system th[...]

ꭧ : If equipped. DRL TACHOMETER SPEEDOMETER FUEL GAUGE U.S. model is shown . INFORMATION DISPLAY ODOMETER/TRIP METER/ CHECK FUEL CAP MESSAGE TEMPERATURE GAUGE SELECT/RESET KNOB OUTSIDE TEMPERATURE INDICATOR ꭧ Gauges 64 2009 Element[...]

Information Display The information display shows the odometer, trip meter, engine oil life, outside temperature (if equipped), and maintenance item code(s). To switch the display, press and release the select/reset knob repeatedly. When you turn the ignition switch to the ON (II) position, your last selection is displayed. Odometer The odometer sh[...]

Trip Meter This shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Switch between these displays by pressing the select/reset knob repeatedly. Each trip meter works independently, so you can keep track of two different distances. When you turn the ignition switch to [...]

If the system still detects a leak in your vehicle's evaporative emissions system, the malfunction indicator lamp (MIL) comes on. If the fuel fill cap was not already tightened, turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL should go off after several days of normal driving once the cap is[...]

Outside Temperature Indicator On EX and SC models This indicator displays the outside temperature in Fahrenheit (U.S. models) or Celsius (Canadian models). The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can c[...]

ꭧ 1: To use the horn, press the center pad of the steering wheel. ꭧ 2: If equipped ꭧ 3: Only on vehicles equipped with navigation system. Refer to the navigation system manual. HAZARD WARNING BUTTON (P. 73 ) CRUISE CONTROL BUTTONS (P. 193 ) STEERING WHEEL ADJUSTMENT (P. 74 ) HORN ꭧ 1 A/T model with navigation system is shown. VSA OFF SWITCH[...]

Windshield Wiper 1. MIST 2. OFF 3. INT － Intermittent 3. LO － Low speed 5. HI － High speed 6. Windshield washers Push the right lever up or down to select a position. MIST － The wipers run at high speed until you release the lever. OFF － The wipers are not activated. INT － The length of the wipe interval is varied automatically accordin[...]

1. Turn signal 2. Off 3. Parking and instrument panel lights 4. Headlights on 5. High beams 6. Flash high beams Turn Signal － Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn. Headlight[...]

High Beams － Push the lever back until you hear a click to turn on the high beams. The blue high beam indicator will come on (see page 61 ). Pull the lever back again to low beams. To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back. Daytime Running Lights With the [...]

The level of brightness is shown on the information display while you adjust it. It goes out about 5 seconds after you finish adjusting. To reduce glare at night, the instrument panel illumination dims when you turn the light switch to or . Turning the select/reset knob to the right until you hear a beep will cancel the reduced brightness. The inst[...]

Rear Window Defogger The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is on. If you do not turn it off, the defogger will shut itself off after about 15 minutes. It also shuts off when you turn off the ignition swit[...]

To adjust the steering wheel upward or downward: 1. Push the lever under the left side of the steering column all the way down. 2. Move the steering wheel up or down to the desired position. Make sure you can see the instrument panel gauges and the indicators. 3. Push the lever up to lock the steering wheel in that position. 4. Make sure you have s[...]

You should have received a key number tag with your set of keys. You will need this key number if you ever have to get a key replaced. Use only Honda-approved key blanks. These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged. ● Protect the keys from [...]

If the system repeatedly does not recognize the coding of your key, contact your dealer. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. If you have lost your key and cannot start the engine, contact your dealer. Always take the ignition key with you whenever yo[...]

UNLOCK － Press this button once to unlock the driver's door. Push it twice to unlock the passenger's door and the hatch. Some exterior lights will flash twice each time you press the button. If you do not open either door or the hatch within 30 seconds, they will automatically relock. PANIC － Press this button for about 1 second to at[...]

To replace the battery, remove the round cover on the back of the transmitter by turning it counterclockwise with a coin. Insert a new battery with the ＋ side facing up, and reinstall the cushion ring. Align the ▽ mark on the cover with the mark on the transmitter. Set the cover in place and turn it clockwise. As required by the FCC: This devic[...]

If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key. ACCESSORY (I) － You can operate the audio system and the accessory power sockets in this position. ON (II) － This is the normal key position when driving. Several of the indicators o[...]

The lock tab on the passenger's door locks and unlocks only that door. Pulling up on the driver's door lock tab only unlocks the driver's door. To lock the driver's door, remove the key from the ignition switch, push the lock tab down or push the door lock switch down, then close the door. To unlock the driver's door from t[...]

● Lock the hatch by pushing down the lock tab on the driver's door (see page 80 ), or by using the master key in the driver's door lock. ● Lock or unlock the hatch with the master door lock switch. With the hatch unlocked, open it by pulling the handle and lifting up. To close the hatch, lower it, then press down on the back edge. Whe[...]

See page 210 for information on cargo loading. Keep the tailgate and the hatch closed at all times while driving to avoid damaging them, and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard on page 52 . Seat Adjustments See pages 11 － 13 for important safety information and warnings about how to properly position [...]

To change the seat-back angle of the front seat, pull up on the lever on the outside of the seat bottom. Adjust the seat-back and make sure it locks into position. Rear Seat To change the angle of the rear seat- back, pull the strap at the inside edge of the seat cushion, make sure the seat-back locks into position. Driver's Seat Height Adjust[...]

Front Seat Armrests On EX model Each front seat has an armrest on the side of the seat-back. To use it, pivot it down. Head Restraints See page 13 for important safety information and a warning about improperly positioning head restraints. Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers[...]

Adjusting the Hea d Restraint The head restraints in the front and rear seating positions adjust for height. You need both hands to adjust the restraint. To raise it, pull upward. To lower the restraint, push the release button sideways and push the restraint down. Removing the Head Restraint To remove a head restraint for cleaning or repair, pull [...]

Reclining the Front Seats You can recline the seat-backs on the front seats so they are level with the rear seat cushions, making a large cushioned area. To do this: 1. Remove the head restraints from the front seats (see page 85 ), and store them in the side pockets of the cargo area. 2. Adjust the front seats forward as far as possible. Pull up t[...]

Folding the Rear Seats To create more cargo space, you can fold up each rear seat to each side wall separately. 1. Lower the head restraint to its lowest position. 2. Pull the seat-back adjustment strap at the inside edge of the seat cushion and push the seat-back backward as far as it will go. 3. Pull the release strap on the seat support, and piv[...]

4. A fastening strap is attached to the inside of the seat cushion. While pushing the seat up and toward the side wall, hook the fastening strap to the grab rail. 5. Fold down the seat support. Reverse this procedure to return the rear seat to the upright position. When not in use, store the fastening strap hook in the fabric pocket on the bottom o[...]

Removing the Rear Seats Both seats can be removed to give more cargo capacity. To remove a seat: 1. Pull the release strap on the seat support to unlock the seat support. 2. Remove the cover between the seat cushion and the side wall by pulling the tab and pulling the cover straight up. 3. Push the lock lever forward to unlock the seat and fold dow[...]

4. Hold the steel handle next to the lock lever and the handle strap at the outside edge of the seat cushion, and remove the entire seat by pulling it up and backward. Reverse this procedure to reinstall the seat. Make sure the seats are securely locked in place before driving. Always remove an unsecured seat from the vehicle before driving. A seat[...]

Turn the ignition switch to the ON (II) position to raise or lower either window. To open a window, push the switch down and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window. Closing a power window on someone's hands or fingers can cause serious injury. Make sure your passeng[...]

Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position. Adjusting the Power Mirrors[...]

Rear Windows To open a rear window, pull the lever towards you, then push it out until it locks. To close the rear window pull the lever towards you, then push it back. Make sure the window is fully closed and locked. Parking Brake To apply the parking brake, pull the lever up fully. To release it, pull up slightly, push the button, and lower the l[...]

Light Control Switch On EX and SC models The light control switch has three positions: OFF, Door Activated, and ON. When the switch is in the OFF position: ● The individual map lights can be turned on and off by pressing the lenses. ● The ceiling light cannot be turned on. When the switch is in the door activated position: ● The individual ma[...]

Courtesy Light On vehicles with navigation system The courtesy light between the map lights comes on when you turn the parking lights on. To adjust its brightness, turn the select/reset knob on the instrument panel (see page 72 ). Ceiling Light The ceiling light has a three-position switch: ON, Door Activated, and OFF. In the Door Activated (center[...]

ꭧ : If equipped. CARGO AREA CARGO AREA SIDE POCKET COIN TRAY DOOR POCKETS BEVERAGE HOLDERS LX model EX model OVERHEAD CONSOLE ꭧ ACCESSORY POWER SOCKET GLOVE BOX CENTER LOWER POCKET ꭧ SEAT-BACK POCKET ꭧ ACCESSORY POWER SOCKET VANITY MIRRORS ꭧ SC model BEVERAGE HOLDERS Interior Convenience Items 97 Instruments and Controls 2009 Element[...]

Cooler Box On EX model There is a cooler box between the driver's and passenger's seats. To open the cooler box, slide the tab backward, and pull up the lid. The lid has a breakaway feature. If the lid is rotated back too far it will break away from the box without damage. To reinstall the lid, vertically set the rear lid hinge to the pin[...]

To reinstall the cooler box, set the cooler box into the floor base, then slide the cooler box forward. Rotate the handle down to the locked position. Make sure the cooler box is securely locked in place. A cooler box that is not locked in place could become a projectile and cause injury in a sudden stop or crash. If you take the cooler box out, pu[...]

Accessory Power Sockets Your vehicle has one, two, or three accessory power sockets, depending on the model. All models have a front accessory power socket on the dashboard above the glove box. EX and SC models have an accessory power socket in the cargo area on the passenger's side. The SC model has one additional socket in the center console[...]

Vanity Mirror On EX and SC models To use the vanity mirror on the back of the sun visor, pull up the cover. Overhead Console On EX and SC models To open the overhead console, push on the rear edge or slide the tab as shown in the illustration. It will unlatch and swing down. To close it, push it until it latches. Make sure the holder is closed whil[...]

102 2009 Element[...]

The heating and air conditioning system in your vehicle provides a comfortable driving environment in all weather conditions. The standard audio system has many features. This section describes those features and how to use them. (If you have an optional audio system, refer to the operating instructions that came with it.) On EX and SC models Your [...]

FAN CONTROL DIAL TEMPERATURE CONTROL DIAL MODE CONTROL DIAL DEFROST POSITION REAR WINDOW DEFOGGER BUTTON MAX A/C POSITION A/C (AIR CONDITIONING) BUTTON RECIRCULATION BUTTON Vents, Heating, and A/C 104 2009 Element[...]

Air Flow Controls Fan Control Dial Turn this dial clockwise to increase the fan speed and airflow. Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. Air Conditioning (A/C) Button This button turns the air conditioning on and off. The indicator in the button is on when the A/C is on. Recirculation Button [...]

Air flows from the defroster vents at the base of the windshield. When you select or , the system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then discharges it through vents near the tailg[...]

Dehumidify the Interior Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry and can prevent the windows from fogging up. 1. Turn the fan on. 2. Turn on the air conditioning. 3. Select and fresh air mode. 4. Adjust the temperature to your preference. This setting [...]

To Remove Exterior Frost or Ice From the Windows 1. Select . The system automatically switches to fresh air mode and turns on the A/C. The A/C indicator does not come on if the A/C was off to start with. 2. Select . 3. Set the fan and temperature controls to maximum level. 4. Select to help clear the rear window. To clear the windows faster, you ca[...]

An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle's audio system. For vehicles without navigation system, see pages 110 through 126 . For vehicles with navigation system, see pages 127 through 182 . LX model EX and SC models U.S. EX and SC models with navigation system Audio System 109 F[...]

LX model EX and SC models AM/FM BUTTON STEREO INDICATOR SCAN BUTTON SCAN INDICATOR VOL/PWR KNOB SEEK/SKIP BAR PRESET BUTTONS TUNE KNOB A.SEL BUTTON VOL/PWR KNOB AM/FM BUTTON STEREO INDICATOR SCAN BUTTON PRESET BUTTONS TUNE KNOB A.SEL BUTTON SEEK/SKIP BUTTON Playing the FM/AM Radio (Models without navigation system) 110 2009 Element[...]

To Play the Radio The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Turn the system on by pushing the VOL/PWR knob or the AM/FM button. Adjust the volume by turning the same knob. The band and frequency that the radio was last tuned to is displayed. To change bands, press the AM/FM button. On the FM band, ST will be displaye[...]

AUTO SELECT － If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the A. SEL button. ‘‘ A. SEL ’’ flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM sta[...]

XM ® Radio On EX and SC models Your vehicle is capable of receiving XM ® Radio anywhere in the United States, and Canada except Hawaii and Alaska. XM ® is a registered trademark of XM Satellite Radio ® , Inc. PRESET BUTTONS CATEGORY BUTTONS TUNE KNOB SCAN BUTTON VOL/PWR KNOB XM BUTTON CHANNEL INDICATOR CATEGORY INDICATOR DISP/MODE BUTTON CONTIN[...]

XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display. Operating the XM Radio To listen to the XM Radio, turn the ignition swit[...]

SCAN － The scan function gives you sampling of all channels while in the channel mode. In the category mode, only the stations within that category are scanned. To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue li[...]

XM Radio Display Messages ‘‘ LOADING ’’ － XM is loading the audio or program information. ‘‘ OFF AIR ’’ － The channel currently selected is no longer broadcasting. ‘‘ UPDATING ’’ － The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally. ‘‘ [...]

The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equato[...]

Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● Driving on the north side of an east/west mountain road. ● Driving on the north side of a large commercial truck on an east/west road. ● Driving in tunnels. ● Driving on a road beside a vertical wall, steep cliff, or[...]

RDM (RANDOM) BUTTON DISC INDICATOR FOLDER KNOB SEEK/SKIP BUTTONS RPT (REPEAT) BUTTON RANDOM BUTTON SEEK/SKIP BAR VOL/PWR KNOB RANDOM INDICATOR REPEAT INDICATOR EJECT BUTTON CD/TAPE BUTTON CD SLOT CD SLOT EJECT BUTTON FOLDER INDICATOR EX and SC models LX model RANDOM INDICATOR DISPLAY BUTTON RPT (REPEAT) BUTTON SCAN BUTTON CD/AUX BUTTON VOL/PWR KNOB[...]

To Play a Disc To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. You operate the disc player with the same controls used for the radio. To select the disc player, press the CD/ TAPE or the CD/AUX button. You[...]

Insert the disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. When the system reaches the end of the disc, it will return to the beginning and play the disc again. To play the radio when a disc is playing, press the AM/FM button. Press the CD/TAPE or CD/AUX button again to switch back to[...]

REPEAT (TRACK/FILE REPEAT) － To continuously replay a track (files in MP3/WMA mode), press and release the RPT button. You will see RPT in the display. Press the RPT button again to turn it off. On EX and SC models In MP3/WMA mode FOLDER SELECTION － To select a different folder, use the FOLDER knob to move to the beginning of the next folder. T[...]

On EX and SC models SCAN － The scan function samples all tracks/files on the disc in the order they are recorded. To activate scan, press and hold the SCAN button until you hear a beep. You will see SCAN in the display. You will get a 10 second sampling of each track/ file on the disc. Press the SCAN button again to exit scan and play the last tr[...]

Audio System Malfunction See pages 125 and 126 for information on error messages. Protecting Discs For information on how to handle and protect discs, see page 183 . Operating the Optional Disc Changer On LX model An optional six disc changer is available for your vehicle. This disc changer uses the same controls used for the in-dash disc player or[...]

The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page [...]

If you see an error message in the display while playing a disc, find the cause in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Cause Solution DISC FOCUS error Press the EJECT button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is n[...]

Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the navigation section in your Quick Start Guide for an overview of this system, and the Navigation System Manual for complete details. Playing the FM/AM Radio AUTO SELECT ICON AM/FM BUTTON AUDIO BUTT[...]

To Play the FM/AM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob. Pushing the AUDIO button will also turn on the system. You can also operate the audio system without using the control icons on the[...]

SCAN － The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. The system will scan for a station with a strong signal. When it finds one, it will stop and play that station for about 10 seconds. If you do nothing, the system will th[...]

You will see a ‘‘ 0 ’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described. To turn off auto select, press the AUTO SEL icon. This restores the preset[...]

BALANCE － Adjusts the side-to- side strength of the sound. To adjust the left/right balance, touch the L or R icon. SUBWOOFER － Adjusts the strength of sound from the subwoofer speaker. To adjust the sound strength, touch or on each side of the adjustment bar. The right upper display shows you the current setting of the sound strength coming fr[...]

POWER/VOLUME KNOB AM/FM BUTTON CD/XM (XM RADIO) BUTTON AUDIO BUTTON SCAN BUTTON JOYSTICK CHANNEL INDICATOR TUNE BAR PRESET BUTTONS XM RADIO ICON MODE ICON Playing the XM ® Radio (Models with navigation system) 132 2009 Element[...]

Your audio system is capable of receiving XM ® Radio anywhere in the United States, and Canada, except Hawaii and Alaska. XM ® is a registered trademark of XM Satellite Radio ® , Inc. XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large [...]

On the audio display, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title). You may experience periods when XM Radio does not transmit the artist's name and song title information. If this happens, there is nothing wrong with your system. TUNE － Press the TUNE bar to change channel selections. Pre[...]

4. Repeat steps 2 and 3 to store the first six channels. 5. Press the XM button again or touch the other XM icon (XM1 or XM2) on the audio display. Store the next six channels using steps 2 and 3. Once a channel is stored, press and release the proper preset button (icon) to tune to it. Each preset button's channel is shown on the bottom of th[...]

To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. XM Radio Display Messages ‘‘ LOADING ’’ － XM is loading the audio or program information. ‘‘ OFF AIR ’’ － The channel currently selected is no longer broadcasting. ‘‘ UPDATING ’’ － The encryption code is being updated. Wai[...]

The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equato[...]

Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● Driving on the north side of an east/west mountain road. ● Driving on the north side of a large commercial truck on an east/west road. ● Driving in tunnels. ● Driving on a road beside a vertical wall, steep cliff, or[...]

While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, you'll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated afte[...]

POWER/VOLUME KNOB JOYSTICK RPT (REPEAT) BUTTON CD ICON RDM (RANDOM) BUTTON OPEN BUTTON CD/XM BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR REWIND BUTTON FAST FORWARD BUTTON SKIP ꭚ BUTTON SKIP ꬽ BUTTON Playing a Disc (Models with navigation system) 140 2009 Element[...]

To Play a Disc You operate the disc player with the same controls used for the radio. To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. This audio system can also play CD-Rs and CD-RWs compressed in MP3 or W[...]

To Load a Disc The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears. Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. To return the screen to the upright position, p[...]

Push the AUDIO button beside the screen to show the audio display and operate the disc player. You can also operate the audio system without using the control icons on the audio screen. Press the CD/XM button. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO[...]

In MP3 or WMA mode FOLDER SELECTION － To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the previous folder. TRACK REPEAT (FILE REPEAT) － To continuously replay a track (file in MP3 or WM[...]

SCAN (TRACK/FILE SCAN) － The scan function samples all tracks (files in MP3 or WMA) in the order they were recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press the SCAN button again to get out of scan mode and play the last tr[...]

Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder. The display changes to the file list. Then, select and touch a desired file. Touch the folder icon on the upper left of the screen to move to the parent folder. To scroll through the display, touch the or icon on the side of the screen. To go[...]

To Stop Playing a Disc To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD/XM button again or touch the CD icon to switch back to the disc player. To play an audio unit connected to the auxiliary input j[...]

The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page [...]

POWER/VOLUME KNOB JOYSTICK PLAY MODE ICON OPEN BUTTON CD/XM BUTTON AUDIO BUTTON SCAN BUTTON TUNE BAR TRACK LIST ICON PC CARD ICON RPT (REPEAT) BUTTON RDM (RANDOM) BUTTON FAST FORWARD BUTTON REWIND BUTTON SKIP ꬽ BUTTON SKIP ꭚ BUTTON CONTINUED Playing a PC Card (Models with navigation system) 149 Features 2009 Element[...]

To Play a PC Card You operate the PC card player with the same controls used for the radio and the disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position. The PC card player reads and plays cards in MP3 or WMA formats. Depending on the format, the screen will indicate ‘‘ MP3 ’’ or ‘‘ WM[...]

The specifications for compatible WMA files are: – Sampling frequency: 32/44.1/48 kHz – Bitrate: 48/64/80/96/128/160/192 kbps – Compatible with variable bitrate and multi-session – Maximum layers (including ROOT): 8 layers In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that fi[...]

There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue. ● Folder mode plays tracks in the order they were added to the card. ● Artist mode plays tracks in alphabetical order, by artist and song title. ● Album mode pl[...]

To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display. Select the desired mode by touching the appropriate icon, or move the joystick, then press the ENT. After you select the play mode, the display changes to the selectable playing menu. If you select ‘‘ Continue playing the curren[...]

If you select ‘‘ Play a new track list, ’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list. To go back to the previous screen, press the CANCEL button on the right side of the screen. To exit the play mode screens, press the AUDIO button. To Change or Select Tracks/Files You can [...]

TRACK REPEAT (FILE REPEAT) － To continuously replay a file, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off. FOLDER/ARTIST/ALBUM REPEAT － This feature, when activated, replays all the files in the selected folder/artist/album in the order they are recorded or liste[...]

FOLDER/ARTIST/ALBUM SCAN － This feature, when activated, samples the first file in each folder/ artist/album on the PC card in order. To activate each scan feature, press and hold the SCAN button until you hear a beep. You will see FOLDER SCAN, ARTIST SCAN or ALBUM SCAN in the display. The system plays the first file in the folder for about 10 se[...]

To select a folder, touch its icon on the screen. The display changes to the file list, then select a file. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue. In artist mode, the artist name is also displayed on the right side of each selectable icon. Select[...]

To go back to the normal playing display, press the AUDIO button. Pressing the CANCEL button goes back to the previous screen and pressing the MAP button cancels the audio mode display. Song Search Fun ction When you select ‘‘ Song Search ’’ from the track list display, the song search menu appears. You can then select any of three modes to[...]

Searching for a Song Title by Keyword In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen. Press the List icon to begin the song search. If you press the CANCEL button on the screen, the display returns to the mode menu without doing a search. To cancel the selected letter, select the letter an[...]

Searching for a Song by Album Name Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list. To Stop Playing a PC Card To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a disc is in[...]

If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Solution FILE ERROR The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged NO MUSIC [...]

POWER/VOLUME KNOB JOYSTICK AUDIO CONTROL DISPLAY CD/XM BUTTON AUDIO BUTTON iPod INDICATOR USB ICON RPT (REPEAT) BUTTON RDM (RANDOM) BUTTON FAST FORWARD BUTTON REWIND BUTTON SKIP ꬽ BUTTON SKIP ꭚ BUTTON CANCEL BUTTON MAP BUTTON Playing an iPod ® (Models with navigation system) 162 2009 Element[...]

To Play an iPod ꭂ This audio system can select and play the audio files on the iPod ® with the same controls used for the in-dash disc player. To play an iPod, connect it to the USB adapter cable in the glove box by using your dock connector. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon. The ignition [...]

NOTE: ● Do not connect your iPod using a HUB. ● Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it. ● Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector. ● We recommend backing up your data before playing it. In AAC format, DRM (digital rights managem[...]

When the iPod is connected and the USB mode is selected on the audio display, ‘‘ USB LOAD ’’ is shown for a few seconds, then the iPod indicator is shown on the display. On the navigation map display, the ‘‘ USB CONNECTED ’’ message will be displayed for a few seconds in the lower part of the screen. After loading, you will see Hond[...]

On the map screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower part of the screen. To Change or Select Files Use the preset buttons while an iPod is playing to select passages and change files. Each preset button's function is shown on the bottom of the screen. SKIP － Each time you press and release [...]

Using a Track List You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display. To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return [...]

Select a desired list by touching the appropriate icon. The display shows the items on that list. Touch a desired file. To scroll through the display, touch the or icon on the side of the screen. To go back to the previous display, touch the Return icon. To select a desired icon with the joystick, move it in the appropriate direction, then press EN[...]

To Select Repeat or Random Mod e: You can select any type of repeat and random modes with the RPT and RDM buttons. To confirm the selected mode, press the AUDIO button to show the audio display on the navigation screen. TRACK REPEAT － This feature continuously plays a track/file. To activate track repeat, press and release the RPT button (preset [...]

ALBUM RANDOM － This feature plays all available albums from the selected item in the iPod menu list (playlists, artists, albums or songs) in random order. The tracks/files in each album are played in the recorded order. To activate album random, press and release the RDM button (preset 2) repeatedly until you see ALBUM RANDOM on the screen. Press[...]

iPod Error Messages If you see an error message in the screen, see page 172 . Playing an iPod ® (Models with navigation system) 171 Features 2009 Element[...]

If you see an error message on the screen while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Solution UNSUPPORTED Appears when an unsupported iPod is inserted. NO SONG There is no music information. iPod ® Error Messages (Models with navigation [...]

POWER/VOLUME KNOB JOYSTICK SCAN BUTTON AUDIO BUTTON MP3 INDICATOR USB ICON RPT (REPEAT) BUTTON RDM (RANDOM) BUTTON FAST FORWARD BUTTON REWIND BUTTON SKIP ꬽ BUTTON SKIP ꭚ BUTTON SOUND ICON TRACK LIST ICON CONTINUED Playing a USB Flash Memory Device (Models with navigation system) 173 Features 2009 Element[...]

To Play a USB Flash Memory Device This audio system can select and play the audio files from a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the glove box. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO[...]

NOTE: ● Do not use a device such as a card reader or hard drive as the device or your files may be damaged. ● Do not connect your USB flash memory device using a HUB. ● Do not use an extension cable to the USB adapter cable equipped with your vehicle. ● Do not keep the USB flash memory device in the vehicle. Direct sunlight and high heat wi[...]

The specifications for compatible WMA files are: – Sampling frequency: 32/44.1/48 kHz – Bitrate: 48 － 320/VBR kbps (Max 384) – Supported standards: WMA version 7/8/9 – Partition: Top partition only – Maximum layers: 8 The specifications for compatible AAC files are: – Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.1/48 kHz – Bit[...]

Connecting a USB Flash Memory Device 1. Pull out the USB connector from the holder and remove the cable from the clip in the glove box. 2. Connect the USB flash memory device to the USB adapter cable correctly and securely. When the USB device is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon sw[...]

To Change or Select Files Use the preset buttons while a USB flash memory device is playing to select passages and change files. Each preset button's function is shown on the bottom of the screen. SKIP － Each time you press and release (preset 6), the system skips forward to the beginning of the next file. Press and release (preset 5), to sk[...]

Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder. The display changes to the file list. Then, select and touch a desired file. Touch the folder icon on the upper left of the screen to move to the parent folder. To scroll through the display, touch the or icon on the side of the screen. To go[...]

To Select Repeat , Random or Scan Mode: You can select any type of repeat, random and scan modes with the RPT, RDM and SCAN buttons. To confirm the selected mode, press the AUDIO button to show the audio display on the navigation screen. TRACK REPEAT － This feature continuously plays a track/file. To activate track repeat, press and release the R[...]

TRACK SCAN － This feature samples all tracks/files in the selected folder in the order they are stored. To activate track scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file in the folder. FOLDER-SCAN － This feature samples the first track/file in each folder in t[...]

If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Solution UNPLAYABLE FILE The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility tha[...]

General Information ● When using CD-R or CD-RW discs, use only high quality CDs labeled for audio use. ● When recording a CD-R or CD-RW, the recording must be closed for it to be used by the system. ● Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems. ● Handle your discs properly to prevent damage[...]

Additional Information on Recommended Discs The disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated below, it may become stuck inside and damage the audio unit. Examples of these discs are shown to the right: 1. Bubbled, wrinkled, labeled, and excessively thick discs 2. Damaged discs 3. Poor qua[...]

4. Small, irregular shaped discs 5. Discs with scratches, dirty discs ● CD-R or CD-RW may not play due to the recording conditions. ● Scratches and fingerprints on the discs may cause the sound to skip. ● Recommended discs are printed with the following logo. ● Audio unit may not play the following formats. ● This audio unit cannot play a[...]

Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stat[...]

Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station's transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving. Radio reception can be affecte[...]

On EX and SC models Your vehicle's audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific code in the preset buttons (icon on vehicle's with navigation system). Because there are hundreds of number combinations possible from specific digits, making the [...]

On vehicles without navigati on system If your vehicle's battery is disconnected or goes dead, you may need to set the clock. On LX model To set the hour, press the H button while pressing the CLOCK (SCAN/ RPT) button until the hour advances to the desired time. Change the minute by pressing the M button while pressing the CLOCK (SCAN/ RPT) bu[...]

You can quickly set the time to the nearest hour. If the displayed time is before the half hour, press the R (RESET) button to set the clock back to the previous hour. If the displayed time is after the half hour, pressing R sets the clock forward to the beginning of the next hour. For example: 1:06 will reset to 1:00 1:53 will reset to 2:00 When y[...]

On EX and SC models Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. The middle button adjusts the volume up ( ) or down ( ). Press the top or bottom of the button and hold it until the desired volume is reached, then release it. The MODE butt[...]

In MP3 or WMA mode, you can use the seek function to select folders. Press and hold the CH button until you hear a beep, to skip forward to the first file of the next folder. On vehicles with navigation sys tem If you are playing a PC card, press the CH button to advance to the next file. If you are playing a USB flash memory device or iPod with th[...]

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather. Improper use of the cruise control can lead to a crash. Use the cru[...]

Cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down. This will cancel cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on. When climbing a steep hill, the automati[...]

Resting your foot on the brake or clutch pedal causes the cruise control to cancel. Canceling Cruise Control You can cancel cruise control in any of these ways: ● Tap the brake or clutch pedal. ● Push the CANCEL button on the steering wheel. ● Push the CRUISE button on the steering wheel. Resuming the Set Speed When you push the CANCEL button[...]

On vehicles with navigation sys tem Whenever you shift to reverse (R) with the ignition switch in the ON (II) position, the rear view is shown on the navigation system screen. For the best picture, always keep the rearview camera clean, and do not cover the camera lens. To avoid scratching the lens when you clean it, use a moist, soft cloth. When i[...]

Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first. Break-in P[...]

Break-in Period Help assure your vehicle's future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period: ● Avoid full-throttle starts and rapid acceleration. ● Do not change the oil until the scheduled maintenance time. ● Avoid hard braking for the first 200 miles[...]

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline. For further important fuel-related information, please refer to your Quick Start Guide. Refueling 1. Park with the driver's side closest to the service station pump. 2. Outside of the vehicle, open the fuel fill door by pulling[...]

Opening and Closing the Hood 1. Park the vehicle, and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly. 2. Put your fingers under the front edge of the hood near the center. The hood latch handle is above the ‘‘ H ’’ logo. Push this handle up to release i[...]

Oil Check Wait a few minutes after turning the engine off before you check the oil. 1. Remove the dipstick (orange tab). 2. Wipe the dipstick with a clean cloth or paper towel. 3. Insert it all the way back in its tube. 4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. If it is near or below the lowe[...]

Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The EPA fuel economy estimates shown in the example t[...]

Fuel Economy Factors The following factors can lower your vehicle's fuel economy: ● Aggressive driving (hard acceleration and braking) ● Excessive idling, accelerating and braking in stop-and-go traffic ● Cold engine operation (engines are more efficient when warmed up) ● Driving with a heavy load or the air conditioner running ● Imp[...]

● Minimize the use of the air conditioning system － The A/C puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible. ● Plan and combine trips － Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one. Calculating Fuel Economy Measuring Techniques Dire[...]

Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information. Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and a[...]

Modifying Your Vehicle Removing parts from your vehicle, or replacing components with some non-Honda components could seriously affect your vehicle's handling, stability, and reliability. Some examples are: ● Lowering the vehicle with a non- Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit s[...]

ꭧ : If equipped Your vehicle has several convenient storage areas: ● Cargo area side pockets ● Glove box ● Overhead console (EX and SC models) ● Door pockets ● Seat-back pockets (EX and SC models) ● Cargo area (including rear seats when they are folded down, folded to the side, or removed) ● Seat-back bungees (EX model) ● Roof-rac[...]

However, carrying too much cargo, or improperly storing it, can affect your vehicle's handling, stability, stopping distance, tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages. Load Limits The maximum load for your vehicle is 675 lbs (308 kg). See Tire And Loading Information label attached to th[...]

4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘ XXX ’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400 － 750 (5 ╳ 150) ＝ 650 lbs.) 5. Determine the combined weigh[...]

Carrying Items in the Passenger Compartment ● Store or secure all items that could be thrown around and hurt someone during a crash. ● Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the pedals, the seat operation, or the proper operation of the sensors under the seats. ● Keep the glove [...]

Optional Cargo Net The cargo net can be used to help hold down light items in the cargo area. The cargo net may not prevent heavy items from being thrown forward in a crash or a sudden stop. Heavy items should be secured to the cargo area floor with the hooks or cinch straps attached to the cargo hooks. Seat-Back Bungee On EX model The driver'[...]

Cargo Hooks The four hooks on the side panels can be used to install a net for securing items. Each hook is designed to hold up to 50 lbs (23 kg) of weight. Your vehicle also has a grocery hook on each side panel in the cargo area. They are designed to hold light items. Heavy objects may damage the hook. Make sure any items put on each hook weigh l[...]

This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ® ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning [...]

Your vehicle has a higher ground clearance that allows you to travel over bumps, obstacles, and rough terrain. It also provides good visibility so you can anticipate problems earlier. Because your vehicle rides higher off the ground, it has a high center of gravity that can cause it to roll over if you make abrupt turns. Utility vehicles have a sig[...]

You should do the following checks and adjustments before you drive your vehicle. 1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice. 2. Check that the hood is fully closed. 3. Visually check the tires. If a tire looks low, use a gauge to check its pressure. 4. Check that any items you may b[...]

1. Apply the parking brake. 2. In cold weather, turn off all electrical accessories to reduce the drain on the battery. 3. Manual transmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed. Automatic transmission : Make sure the shift lever is in Park. Press on the brake peda[...]

U.S. models Only The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse. When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your f[...]

Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control. The following shift points are recommended: Shift up Normal acceleration 1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 15 mph (24 km/h) 25 mph (40 km/h) 40 mph (64 km/h) 48 mph (77 [...]

Shift Lever Position Indicators These indicators on the instrument panel show which position the shift lever is in. The ‘‘ D ’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. Avoid rapid [...]

If you have done all of the above and still cannot move the lever out of Park, see Shift Lock Release on page 221 . To avoid transmission damage, come to a complete stop before shifting into Park. You must also press the release button to shift into Park. The shift lever must be in Park before you can remove the key from the ignition switch. Revers[...]

Second (2) － This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop. Use second gear: ● For more power when climbing. ● To increase engine braking when going down steep hills. ● For starting out on a slippery surface or in deep snow. ● To help reduce wheel spin. ● When driving do[...]

3. Put a cloth on the edge of the shift lock release slot cover next to the shift lever. Using a flat-tip screwdriver, carefully pry on the edge of the cover to remove it. 4. Insert the key in the shift lock release slot. 5. Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to neutral. 6[...]

Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in [...]

Your vehicle is equipped with disc brakes at all four wheels. A power assist helps reduce the effort needed on the brake pedal. The emergency brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard. Res[...]

Brake Pad Wear Indicators If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them. Anti-lock Brakes (ABS) The anti-lock brake sy[...]

ABS Indicator If this indicator comes on, the anti- lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible. If the indicator comes on while driving, test the brakes as instructed on page 297 . If the ABS indicato[...]

Your vehicle is equipped with a tire pressure monitoring system (TPMS) that turns on every time you start the engine and monitors the pressure in your tires while driving. Each tire has its own pressure sensor (not including the spare tire). If the air pressure of a tire becomes significantly low, the sensor in that tire immediately sends a signal [...]

For example, if you check and fill your tires in a warm area, then drive in extremely cold weather, the tire pressure will be lower than measured and could be underinflated and cause the low tire pressure indicator to come on. Or, if you check and adjust your tire pressure in cooler conditions, and drive into extremely hot conditions, the tire may [...]

The low tire pressure indicator or the TPMS indicator will go off, after several miles (kilometers) driving, when you replace the spare tire with the specified regular tire equipped with the tire pressure monitor sensor. Never use a puncture-repairing agent in a flat tire. If used, you will have to replace the tire pressure sensor. Have the flat ti[...]

The vehicle stability assist (VSA) system helps to stabilize the vehicle during cornering if the vehicle turns more or less than desired. It also assists you in maintaining traction while accelerating on loose or slippery road surfaces. It does this by regulating the engine's output and by selectively applying the brakes. When VSA activates, y[...]

VSA OFF Switch In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA temporarily switched off. When the VSA system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA off if you are not able to free it when the VSA is o[...]

Your vehicle has been designed primarily to carry passengers and their cargo. You can also use it to tow a trailer if you carefully observe the load limits, use the proper equipment, and follow the guidelines in this section. Break-In Period Avoid towing a trailer during your vehicle's first 600 miles (1,000 km) (see page 198 ). Be sure to rea[...]

Tongue Load: The weight that the tongue of a fully-loaded trailer puts on the hitch should be approximately 10% of the total trailer weight. Too much tongue load reduces front-tire traction and steering control. Too little tongue load can make the trailer unstable and cause it to sway. To achieve a proper tongue load, start by loading 60% of the lo[...]

Towing Equipment and Accessories Towing can require a variety of equipment, depending on the size of your trailer, how it will be used, how much load you are towing, and where you tow. To ensure the highest quality equipment, purchase Honda equipment whenever possible. Discuss your needs with your trailer sales or rental agency, and follow the guid[...]

Trailer Lights Trailer lights and equipment must comply with federal, state, provincial, territorial, and local regulations. Check with your local trailer dealer or rental agency for the requirements in the area where you plan to tow, and use only equipment designed for your vehicle. Since lighting and wiring vary by trailer type and brand, you sho[...]

Pre-Tow Checklist When preparing to tow, and before driving away, be sure to check the following: ● The vehicle has been properly serviced, and the tires, brakes, suspension, cooling system, and lights are in good operating condition. ● The trailer has been properly serviced and is in good condition. ● All weights and loads are within limits [...]

Making Turns and Braking Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over. Driving on Hills When climbing hills, c[...]

General Information Your vehicle has been designed primarily for use on pavement. But its higher ground clearance allows you to occasionally travel on unpaved roads, such as campgrounds, picnic sites, and similar locations. It is not designed for trail-blazing, mountain climbing, or other challenging off- road activities. If you decide to drive on [...]

Check Out Your Vehicle Before you leave the pavement, be sure to do all scheduled maintenance and service, and inspect your vehicle for any problems. Pay special attention to the condition of the tires, and check the tire pressures. After you return to the pavement, carefully inspect your vehicle to make sure there is no damage that could make driv[...]

Crossing a Stream Avoid driving through deep water. If you encounter water in your route (a small stream or large puddle, for example), evaluate it carefully before going ahead. Make sure it is shallow, flowing slowly, and has firm ground underneath. If you are not sure of the depth or the ground, turn around and find another route. Driving through[...]

This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions. This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself. If you have the[...]

All service items not detailed in this section should be performed by a certified technician or other qualified mechanic. Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required. ● Make sure your vehicle is parked on level ground, the parking brake i[...]

Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service. Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil[...]

If the remaining engine oil life is 15 to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed above the ‘‘ OIL LIFE ’’[...]

The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page 246 ). You can switch the information display from the engine oil life display to the odometer or the trip meter. Press and release the select/ reset knob on the instrument panel. When the engine oil life is 15 to 1 percent, the maint[...]

To change the information display from the engine oil life display to the odometer or the trip meter, press and release the select/reset knob. When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ( ) remains on even if you change the information display. Immediately have the service performed, and ma[...]

3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink. 4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘ 100. ’’ Important Maintenance Precautions If you have the required service done but [...]

However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the per[...]

Symbol Maintenance Main Items A ● Replace engine oil ꭧ 1 B ● Replace engine oil ꭧ 1 and oil filter ● Inspect front and rear brakes ● Check parking brake adjustment ● Inspect these items: ● Tie rod ends, steering gear box, and boots ● Suspension components ● Driveshaft boots ● Brake hoses and lines (including ABS/VSA) ● All f[...]

ENGINE OIL FILL CAP ENGINE OIL DIPSTICK (Orange tab) POWER STEERING FLUID (Red cap) WASHER FLUID (Blue cap) ENGINE COOLANT RESERVOIR RADIATOR CAP BRAKE FLUID (Gray cap) CLUTCH FLUID (Manual transmission only) (Gray cap) AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop) Fluid Locations 250 2009 Element[...]

Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill. Clean up any spills immediately. Spilled oil could damage components in the engine compartment. Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil di[...]

Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil, it displays the API certification seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the maintenance minder display. Engine Oil Additives Your vehicle does not require any oil additives. [...]

3. Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required. Make sure the oil filter gasket is not stuck to the engine block. If it is, remove it before installing a new oil filter. 4. Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt an[...]

Adding Engine Coolant If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks. Always use Honda Long-life Anti- freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or pl[...]

1. Make sure the engine and radiator are cool. 2. Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down. 3. Remove the radiator cap by pushing down and turning counterclockwise. 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. Pour the coolant slowly[...]

On Canadian models: The low washer level indicator comes on when the level is low (see page 61 ). Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather. When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on [...]

5. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks. Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment. Always use Honda Genuine ATF-Z1 (automatic transmission fluid). Use o[...]

Put a new washer on the filler bolt, then reinstall the filler bolt and tighten it securely. If Honda MTF is not available, you may use an SAE 10W-30 or 10W-40 viscosity motor oil with the API Certification seal that says ‘‘ FOR GASOLINE ENGINES ’’ as a temporary replacement. However, motor oil does not contain the proper additives, and con[...]

Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible. Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage. Brake Fluid The fluid level should be betw[...]

Power Steering Fluid Check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL. Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; it could damage components in the engine compartmen[...]

Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician. Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. Handle it by its steel ba[...]

2. Remove the electrical connector from the bulb by pulling the connector straight back. 3. Remove the rubber weather seal by pulling on the tab. 4. Unclip the end of the hold-down wire from its slot. Pivot the wire out of the way, then remove the bulb. 5. Install the new bulb into the hole, making sure the tabs are in their slots. Pivot the hold-d[...]

4. Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place. 5. Push the electrical connector back onto the bulb. Make sure it is on all the way. 6. Test the lights to make sure the new bulb is working. Replacing a Front Parking/Turn Signal Light Bulb 1. Open the hood. 2. Remove the socket from the headlight ass[...]

Replacing a Side Turn Signal Bulb 1. If you are changing the bulb on the driver's side, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the bulb on the passenger's side, turn the steering wheel to the right. 2. Use a Phillips-head screwdriver to remove the three holding screw[...]

9. Put the inner fender cover in place. Install the holding clip. Lock the clip in place by pushing on the center. Install the wheel arch protector and tighten the screws securely. Replacing a Front Side Marker Light Bulb 1. Open the hood. To change the driver's side, remove the front end of the air intake duct by pulling it out (see page 261 [...]

Replacing Rear Bulbs 1. Open the hatch and the tailgate. Remove the two mounting screws with a Phillips-head screwdriver, and remove the taillight assembly from the body by pulling it back. 2. Determine which of the four bulbs is burned out: brake/taillight, turn signal light, side marker light, or back-up light. 3. Remove the socket by turning it [...]

Replacing a Rear License Plate Bulb 1. Remove the license light assembly by pushing the left edge of the lens toward the right and pulling the assembly out. 2. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 3. Turn on the parking lights and check that the new bulb is working. 4. Put the lens back on t[...]

3. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 4. Press the brake pedal to make sure the new bulb is working. 5. Put the socket back into the light assembly, and turn it clockwise to lock it in place. 6. Put the cover back onto the light assembly. Push it on until it locks in place. Cleanin[...]

If you remove the driver's floor mat, make sure to re-anchor it when you put it back in your vehicle. If you use non-Honda floor mats, make sure they fit properly and that they can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats. Dust and Pollen Filter This filter removes the dust and pollen tha[...]

2. Disconnect the blade assembly from the wiper arm by pushing in the lock tab. Hold the lock tab in while you push the blade assembly toward the base of the arm. If you are changing the rear wiper blade, go to step 6. 3. Remove the blade from its holder by grabbing the tabbed end of the blade. Pull up firmly until the tabs come out of the holder. [...]

Wheels Clean the wheels as you would the rest of the exterior. Wash them with the same solution, and rinse them thoroughly. If equipped Aluminum alloy wheels have a protective clear-coat that keeps the aluminum from corroding and tarnishing. Cleaning the wheels with harsh chemicals (including some commercial wheel cleaners) or a stiff brush can dam[...]

Even though your vehicle is equipped with TPMS, we recommend that you visually check your tires every day. If you think a tire might be low, check it immediately with a tire gauge. Use a gauge to measure the air pressure in each tire at least once a month. Even tires that are in good condition may lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm 2 [...]

The compact spare tire pressure is: 60 psi (420 kPa, 4.2 kgf/cm 2 ) For convenience, the recommended tire sizes and cold tire pressures are on a label on the driver's doorjamb. For additional technical information about your tires, see page 311 . Tire Inspection Every time you check inflation, you should also examine the tires for damage, fore[...]

Tire Maintenance In addition to proper inflation, correct wheel alignment helps to decrease tire wear. If you find a tire is worn unevenly, have your dealer check the wheel alignment. Have your dealer check the tires if you feel a consistent vibration while driving. A tire should always be rebalanced if it is removed from the wheel. When you have n[...]

It is best to replace all four tires at the same time. If that is not possible or necessary, replace the two front tires or two rear tires as a pair. Replacing just one tire can seriously affect your vehicle's handling. If you ever replace a wheel, make sure that the wheel's specifications match those of the original wheels. Also be sure [...]

Tire Chains Mount tire chains on your tires when required by driving conditions or local laws. Install them only on the front tires. On all models except SC Because your vehicle has limited tire clearance, use only SAE Class ‘‘ S ’’ cable-type traction devices, with rubber chain tensioners, on the front tires. Use traction devices only when[...]

Check the condition of the battery monthly by looking at the test indicator window. The label on the battery explains the test indicator's colors. Check the terminals for corrosion (a white or yellowish powder ). To remove it, cover the terminals with a solution of baking soda and water. It will bubble up and turn brown. When this stops, wash [...]

On vehicles with navigation sys tem The navigation system will also disable itself. The next time you turn on the ignition switch, the system will require you to enter a PIN before it can be used. Refer to the navigation system manual. Vehicle Storage If you need to park your vehicle for an extended period (more than 1 month), there are several thi[...]

● Cover the vehicle with a ‘‘ breathable ’’ cover, one made from a porous material such as cotton. Non-porous materials, such as plastic sheeting, trap moisture, which can damage the paint. ● If possible, periodically run the engine until it reaches full operating temperature (the cooling fans cycle on and off twice). Preferably, do thi[...]

280 2009 Element[...]

This section covers the more common problems that motorists experience with their vehicles. It gives you information about how to safely evaluate the problem and what to do to correct it. If the problem has stranded you on the side of the road, you may be able to get going again. If not, you will also find instructions on getting your vehicle towed[...]

Use the compact spare tire as a temporary replacement only. Get your regular tire repaired or replaced, and put it back on your vehicle as soon as you can. Check the inflation pressure of the compact spare tire every time you check the other tires. It should be inflated to: 60 psi (420 kPa, 4.2 kgf/cm 2 ) Follow these precautions: ● Never exceed [...]

If you have a flat tire while driving, stop in a safe place to change it. Drive slowly along the shoulder until you get to an exit or an area to stop that is far away from the traffic lanes. The vehicle can easily roll off the jack, seriously injuring anyone underneath. Follow the directions for changing a tire exactly, and never get under the vehi[...]

5. Push the rear edge of the handle to raise the handle loop and pull up the loop to raise the cargo area floor. 6. Unscrew the wing bolt, and take the spare tire out of the cargo area. 7. Remove the tools and the jack. To remove the jack, turn the jack's end bracket counterclockwise to loosen it. 8. Loosen the five wheel nuts 1/2 turn with th[...]

9. Locate the jacking point nearest the tire you need to change. It is pointed to by an arrow molded into the underside of the body. Place the jack under the jacking point. Turn the end bracket clockwise until the top of the jack contacts the jacking point. Make sure the jacking point tab is resting in the jack notch. 10. Use the extension and the [...]

On LX model Do not attempt to forcibly pry the wheel cover off with a screwdriver or other tool. The wheel cover cannot be removed without first removing the wheel nuts. 12. Before mounting the spare tire, wipe any dirt off the mounting surface of the wheel and hub with a clean cloth. Wipe the hub carefully; it may be hot from driving. 13. Put on t[...]

14. Lower the vehicle to the ground, and remove the jack. 15. Tighten the wheel nuts securely in the same crisscross pattern. Have the wheel nut torque checked at the nearest automotive service facility. Tighten the wheel nuts to: 80 lbf·ft (108 N·m , 11 kgf·m) 16. Store the jack in its holder. Turn the jack's end bracket to lock it in plac[...]

19. Remove the small round plug from the cargo area floor by pushing it from the back side to make a hole. Store the removed plug in a place you can easily remember. 20. Reinstall the cargo area floor. Place the flat tire face down on the cargo area floor. 21. Align the center of the flat tire with the hole in the cargo area floor. Remove the space[...]

Diagnosing why the engine won't start falls into two areas, depending on what you hear when you turn the ignition switch to the START (III) position: ● You hear nothing, or almost nothing. The engine's starter motor does not operate at all, or operates very slowly. ● You can hear the starter motor operating normally, or the starter mo[...]

The Starter Operates Normally In this case, the starter motor's speed sounds normal, or even faster than normal, when you turn the ignition switch to the START (III) position, but the engine does not run. ● Are you using a properly coded key? An improperly coded key will cause the immobilizer system indicator in the instrument panel to blink[...]

Although this seems like a simple procedure, you should take several precautions. A battery can explode if you do not follow the correct procedure, seriously injuring anyone nearby. Keep all sparks, open flames, and smoking materials away from the battery. You cannot start your vehicle with an automatic transmission by pushing or pulling it. To Jum[...]

3. Connect one jumper cable to the positive ( ＋ ) terminal on your battery. Connect the other end to the positive ( ＋ ) terminal on the booster battery. 4. Connect the second jumper cable to the negative ( － ) terminal on the booster battery. Connect the other end to the grounding strap on your vehicle as shown. Do not connect this jumper cab[...]

The pointer of the vehicle's temperature gauge should stay in the midrange. If it climbs to the red mark, you should determine the reason (hot day, driving up a steep hill, etc.). If the vehicle overheats, you should take immediate action. The only indication may be the temperature gauge climbing to or above the red mark. Or you may see steam [...]

5. Look for any obvious coolant leaks, such as a split radiator hose. Everything is still extremely hot, so use caution. If you find a leak, it must be repaired before you continue driving (see Emergency Towing on page 303 ). 6. If you don't find an obvious leak, check the coolant level in the radiator reserve tank. Add coolant if the level is[...]

Low Oil Pressure Indicator This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and you should take immediate action. Running the engine with low oil pressure can cause serious mechanical damage almost immediately[...]

If this indicator comes on while driving, it means one of the engine's emissions control systems may have a problem. Even though you may feel no difference in your vehicle's performance, it can reduce your fuel economy and cause increased emissions. Continued operation may cause serious damage. If you have recently refueled your vehicle, [...]

Brake System Indicator (Red) U.S. Canada The brake system indicator (red) normally comes on when you turn the ignition switch to the ON (II) position, and as a reminder to check the parking brake. It will stay on if you do not fully release the parking brake. If the brake system indicator (red) comes on while driving, the brake fluid level is proba[...]

The vehicle's fuses are located in two fuse boxes. The under-hood fuse box is located in the engine compartment on the driver's side. To open it, push the tabs as shown. The interior fuse box is underneath the steering column. To remove the fuse box lid, turn the knobs clockwise and pull the lid out of its hinges. Checking and Replacing F[...]

3. Check each of the large fuses in the under-hood fuse boxes by looking through the top at the wire inside. Removing these fuses requires a Phillips-head screwdriver. 4. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided in the under-hood fuse box. 5. [...]

If you cannot drive the vehicle without fixing the problem, and you do not have a spare fuse, take a fuse of the same rating or a lower rating from one of the other circuits. Make sure you can do without that circuit temporarily (such as the accessory power socket or radio). If you replace the blown fuse with a spare fuse that has a lower rating, i[...]

INTERIOR FUSE BOX No. Amps. Circuits Protected 1 － Not Used 2 10 A Rear Accessory Power Socket 3 10 A Daytime Running Lights/ TPMS 4 10 A ACG 5 － Not Used No. Amps. Circuits Protected 6 7.5 A Power Window Relay 7 20 A AMP ꭧ 8 7.5 A Accessory, Radio 9 10 A Rear Wiper 10 7.5 A Meter 11 － Not Used No. Amps. Circuits Protected 12 7.5 A Daytime [...]

UNDER-HOOD FUSE BOX No. Amps. Circuits Protected 1 30 A Condenser Fan 2 15 A Small Light 3 7.5 A Interior Light 4 20 A Cooling Fan Motor 5 15 A Hazard 6 15 A FI ECU No. Amps. Circuits Protected 7 15 A Horn, Stop 8 15 A DBW 9 10 A Back Up 10 30 A VSA Motor 11 20 A Rear Defroster 12 40 A Heater Motor No. Amps. Circuits Protected 13 40 A Power Window [...]

If your vehicle needs to be towed, call a professional towing service or organization. Never tow your vehicle with just a rope or chain. It is very dangerous. The only way you can safely tow your vehicle is with flat-bed equipment. The operator will load your vehicle on the back of a truck. Any other method of towing will damage the drive system. W[...]

304 2009 Element[...]

The diagrams in this section give you the dimensions and capacities of your vehicle and the locations of the identification numbers. It also includes information you should know about your vehicle's tires and emissions control systems. Identification Numbers .... ........... 306 Specifications .............................. 308 DOT Tire Qualit[...]

Your vehicle has several identifying numbers located in various places. The vehicle identification number (VIN) is the 17-digit number your dealer uses to register your vehicle for warranty purposes. It is also necessary for licensing and insuring your vehicle. The easiest place to find the VIN is on a plate fastened to the top of the dashboard. Yo[...]

The engine number is stamped into the engine block. The transmission number is on a label on top of the transmission. MANUAL TRANSMISSION NUMBER AUTOMATIC TRANSMISS ION NUMBER ENGINE NUMBER Identification Numbers 307 Technical Information 2009 Element[...]

Dimensions Length 169.9 in (4,316 mm) ꭧ 1 ꭧ 2 170.4 in (4,328 mm) ꭧ 3 Width 71.6 in (1,819 mm) Height 70.4 in (1,788 mm) ꭧ 1, ꭧ 2 69.6 in (1,768 mm) ꭧ 3 Wheelbase 101.4 in (2,575 mm) Track Front 62.1 in (1,577 mm) ꭧ 1, ꭧ 2 62.1 in (1,578 mm) ꭧ 3 Rear 62.3 in (1,582 mm) ꭧ 1, ꭧ 2 62.5 in (1,587 mm) ꭧ 3 Weights Gross vehicle we[...]

Capacities Fuel tank Approx. 15.9 US gal (60 L) Engine oil Change ꭧ 1 Including filter 4.4 US qt (4.2 L) Without filter 4.2 US qt (4.0 L) Total 5.6 US qt (5.3 L) Capacities Engine coolant Automatic Transmission Change ꭧ 2 1.35 US gal (5.1 L) Total 1.90 US gal (7.2 L) Manual Transmission Change ꭧ 2 1.37 US gal (5.2 L) Total 1.93 US gal (7.3 L)[...]

Air Conditioning Refrigerant type HFC-134a (R-134a) Charge quantity 17.6 － 19.4 oz (500 － 550 g) Lubricant type ND-OIL8 Lights Headlights 12 V － 60/55 W (H4/HB2) Daytime running lights 12 V － 60 W (HB3) Front turn signal/parking lights 12 V － 27/8 W (Amber) Front side marker lights 12 V － 3CP Side turn signal lights 12 V － 3CP Rear tu[...]

The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings. Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between t[...]

Temperature The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, a[...]

The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. Tire Size Whenever tires are replaced, they should be replaced with tires of the same size. Following is an example of tire size with an explanation of what each component means. P215/70R16 99S P － Vehicle type (P indicates passenger v[...]

Maximum Tire Press ure Max Press － The maximum air pressure the tire can hold. Maximum Tire Lo ad Max Load － The maximum load the tire can carry at maximum air pressure. Tire Pressure Monitoring System (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by t[...]

Driving on a significantly under- inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibi[...]

The burning of gasoline in your vehicle's engine produces several by- products. Some of these are carbon monoxide (CO), oxides of nitrogen (NOx), and hydrocarbons (HC). Gasoline evaporating from the tank also produces hydrocarbons. Controlling the production of NOx, CO, and HC is important to the environment. Under certain conditions of sunlig[...]

Exhaust Emissions Controls The exhaust emissions controls include three systems: PGM-FI, ignition timing control, and three way catalytic converter. These three systems work together to control the engine's combustion and minimize the amount of HC, CO, and NOx that comes out the tailpipe. The exhaust emissions control systems are separate from[...]

The three way catalytic converter contains precious metals that serve as catalysts, promoting chemical reactions to convert the exhaust gasses without affecting the metals. The catalytic converter is referred to as a three-way catalyst, since it acts on HC, CO, and NOx. A replacement unit must be an original Honda part or its equivalent. The three [...]

Testing of Readiness Codes If you take your vehicle for an emissions test shortly after the battery has been disconnected or gone dead, it may not pass the test. This is because of certain ‘‘ readiness codes ’’ that must be set in the on- board diagnostics for the emissions systems. These codes are erased when the battery is disconnected, a[...]

7. Select a nearby lightly traveled major highway where you can maintain a speed of 50 to 60 mph (80 to 97 km/h) for at least 20 minutes. Drive on the highway in D (automatic) or 5th (manual). Do not use cruise control. When traffic allows, drive for 90 seconds without moving the accelerator pedal. (Vehicle speed may vary slightly; this is okay.) I[...]

Customer Service Information .... 322 Warranty Coverages ................... 323 Reporting Safety Defects (U.S. Vehicles) ................................. 324 Authorized Manuals .................... 325 Warranty and Customer Relations 321 Warranty and Customer Relations 2009 Element[...]

Honda dealership personnel are trained professionals. They should be able to answer all your questions. If you encounter a problem that your dealership does not solve to your satisfaction, please discuss it with the dealership's management. The service manager or general manager can help. Almost all problems are solved in this way. If you are [...]

U.S. Owners Your new vehicle is covered by these warranties: New Vehicle Limite d Warranty － covers your new vehicle, except for the battery, emissions control systems, and accessories, against defects in materials and workmanship. Emissions Control System s Defects Warranty and Emissions Performance Warranty － these two warranties cover your v[...]

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety def[...]

Purchasing Factory Authorized Manuals (U.S. only) The publications shown below can be purchased from Helm Incorporated. You can order by phone or online: ● Call Helm Inc. at (800)782-4356 (credit card orders only) ● Go online at www. helminc. com If you are interested in other years or models, contact Helm Inc. at (800) 782-4356. Publication Fo[...]

326 2009 Element[...]

A Accessories and Modifications .......................... 205 ACCESSORY (Ignition Key Position) ................................... 79 Accessory Power Sockets .......... 100 Additives, Engine Oil ................. 252 Adjusting the Steering Wheel ...... 74 Advanced Airbags ........................ 27 Airbag (SRS) ............................ 9 , 2[...]

Bulbs, Halogen ...................... .... 261 Bungee Cords ............................ 211 C Capacities Chart ......................... 309 Carbon Monoxide Hazard ............ 52 Cargo ......................................... 207 Cargo Area Light .......................... 96 Cargo Hook ................................ 212 Cargo, How to Carry ..[...]

Dipstick Automatic Transmission ......... 256 Engine Oil ............................... 201 Directional Signals ....................... 60 Disc Brake Wear Indicators ....... 225 Disc Care ................................... 183 Disc Changer Error Messages ............................... 126 Disc Player Error Messages ........................ 125 ,[...]

Filling the Fuel Tank .................. 199 Filters Dust and Pollen ....................... 269 Oil ........................................... 252 Flashers, Hazard Warning ........... 73 Flat Tire, Changing a ................. 283 Floor Mats ................................. 268 Fluids Automatic Transmission ......... 256 Brake ..................[...]

Heating and Cooling .................. 104 Hood, Opening and Closing the .......................................... 200 Horn ............................................ 69 Hydraulic Clutch ........................ 258 I Identification Number, Vehicle ................................... 306 Ignition Keys ......................................... 75[...]

LATCH Anchorage System .......... 44 Light Control Switch .................... 95 Lights Bulb Replacement ................... 261 Indicator ................................... 57 Interior ..................................... 95 Parking .................................... 71 Turn Signal .............................. 71 Load Limit ................[...]

Oxygenated Fuels .................. .... 198 P Panel Brightness Control ............. 72 Parking ...................................... 223 Parking Brake ........................ ...... 94 Parking Brake and Brake System Indicator ........................... 58 , 297 Parking Over Things that Burn ................................ 223 , 318 Passenger [...]

Rotation, Tire ............................. 274 S Safety Belts .............................. 8 , 18 Safety Defects, Reporting (U.S. only) ....................................... 324 Safety Features .............................. 7 Airbags ...................................... 9 Head Restraints ........................ 13 Seat Belts .............[...]

How Your Side Curtain Airbags Work .................................... 30 SRS Indicator ......................... 31 , 59 START (Ignition Key Position) ..... 79 Starting the Engine .................... 216 In Cold Weather at High Altitude ................................ 216 With a Dead Battery .... ............ 291 State Emissions Testing .......[...]

Tools, Tire Changing ................. 283 Towing A Trailer .................................. 232 Emergency Wrecker ............... 303 TPMS (Tire Pressure Monitoring System ................................ 227 Indicator ............................ 63 , 228 Required Federal Explanation ......................... 314 Transmission Checking Fluid Lev[...]

Wipers, Windshield Changing Blades ..................... 269 Operation ................................. 70 Worn Tires ...... ........................... 273 Wrecker, Emergency Towing .... 303 X XM ® Radio .......................... 113 , 132 Index XI INDEX 2009 Element[...]

2009 Element[...]

2009 Element[...]

Gasoline: Unleaded gasoline, pump octane number of 87 or higher. Fuel Tank Capacity: 15.9 US gal (60 L) Recommended Engine Oil: API Premium grade 5W-20 detergent oil (see page 251 ). Oil change capacity (including filter): 4.4 US qt (4.2 L) Automatic Transmission Fluid: Honda Genuine ATF-Z1 (Automatic Transmission Fluid) (see page 256 ). Manual Tra[...]

OWNER _______________________________________ __________________ _______________________ ____________________________________ ___________________ ADDRESS _____________________________________ __________________ STREET _______________________ __________ _________________________________ __________ _________ CITY STATE/PROVINCE/TERRITORY ZIP CODE/ PO[...]