HP (Hewlett-Packard) 4340S manual
- Consulta online o descarga el manual de instrucciones
- 117 páginas
- 4.81 mb
Ir a la página of 117
manuales de instrucciones parecidos
-
Laptop
HP (Hewlett-Packard) DV8000
264 páginas 5.09 mb -
Laptop
HP (Hewlett-Packard) D1A51UTABA
70 páginas 2.23 mb -
Laptop
HP (Hewlett-Packard) D1E80UA
115 páginas 3.3 mb -
Laptop
HP (Hewlett-Packard) 14-B010US
110 páginas 3.28 mb -
Laptop
HP (Hewlett-Packard) G62-219WM
126 páginas 4.53 mb -
Laptop
HP (Hewlett-Packard) ZV5000
166 páginas 4.79 mb -
Laptop
HP (Hewlett-Packard) DV3000
143 páginas 4.51 mb -
Laptop
HP (Hewlett-Packard) DV5-2045DX
110 páginas 3.9 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones HP (Hewlett-Packard) 4340S. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica HP (Hewlett-Packard) 4340S o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual HP (Hewlett-Packard) 4340S se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales HP (Hewlett-Packard) 4340S, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones HP (Hewlett-Packard) 4340S debe contener:
- información acerca de las especificaciones técnicas del dispositivo HP (Hewlett-Packard) 4340S
- nombre de fabricante y año de fabricación del dispositivo HP (Hewlett-Packard) 4340S
- condiciones de uso, configuración y mantenimiento del dispositivo HP (Hewlett-Packard) 4340S
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de HP (Hewlett-Packard) 4340S no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de HP (Hewlett-Packard) 4340S y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico HP (Hewlett-Packard) en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de HP (Hewlett-Packard) 4340S, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo HP (Hewlett-Packard) 4340S, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual HP (Hewlett-Packard) 4340S. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
HP ProBook 4340s Notebook PC HP ProBook 4341s Notebook PC Maintenance and Service Guide[...]
-
Página 2
© Copyright 2012 Hew lett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel and Core are trademarks or registered trademarks of Intel Corporation in the United States an d other countries. Microsoft and Windows are either trademarks or registered trademarks o[...]
-
Página 3
Safety warning notice WARNING! To reduce the possibility of heat-related inju ries or of ove rheating th e computer, do not place the compu ter directly on your lap or o bstruct the computer air ven ts. Use the computer only on a hard, flat surface. Do n ot allow another hard surface, such as an adjoinin g optional printer, or a soft surface, such [...]
-
Página 4
iv Safety warning no tice[...]
-
Página 5
Table of contents 1 Product description ............ ......... ........... ......... ......... .......... .......... ........... ........ ............ ... ............. ........ ......... .. 1 2 External component id enti fication ...... ......... ........ ........... ........ ........ .......... ........ ........... ........ ... ........... ......[...]
-
Página 6
Packaging and transporting guidelines ........ ........... ....... ........... ........ 28 Works tation guideline s ..................................................................... 28 Equipmen t guidelines .................... ............................. ...................... 29 Component replac ement procedur es .. .......... ........... .[...]
-
Página 7
Secur ity menu ............ ........... .............. ............. .............. ........... ............ ............ 84 Diagnostics menu ................... ........... ............. .......... .............. .......... .......... ....... 84 Using Advanced System Diagnostics ..... ........... .............. ............... ........... ........[...]
-
Página 8
viii[...]
-
Página 9
1 Product description Category Description Product Name HP ProBook 4340s Not ebook PC HP ProBook 4341s Not ebook PC Processors Intel® Core™ i7 processor, Quad Core (6-GB L3 cache) 3612QM, 2.10-GHz processor Intel Core i5 processors, Dual C ore (3-MB L3 cache) 3360M, 2.80-GHz processor 3320M, 2.60-GHz processor Intel Core i3 processors (3-MB L3 c[...]
-
Página 10
Category Description Supports the following configurations: ● 8192 (4096 × 2; dual channel) ● 6144 (4096 + 2048; dual ch annel) ● 4096 (2048 × 2; dual channel) ● 4096 (4096 × 1) ● 2048 (2048 × 1) Hard drives Supports 7-mm, 6.35-cm (2.50-in) SATA hard drive s with HP 3D DriveGuard Customer-accessible Supports the following drives: ● [...]
-
Página 11
Category Description Integrated WWAN op tions by way of wi reless module: Two WWAN antennas built into display assembly (world-wide 5 band, config ured with panels) Subscriber identity module (SIM) security Supports “no WWAN” option Supports the following WWAN modules: ● Sierra MC8355 (Gobi 3000) H SPA/CDMA with GPS ● Ericsson 5321 HSPA+ wi[...]
-
Página 12
Category Description Novell™: SuSE Linux™ – SLED 11, 64-bit, SP2 (not available with WWAN) FreeDOS Preinstalled with Micr osoft Office: Windows 7 Professional 64 with Microso ft Office 2010 Star ter (not for Japan) Windows 7 Professional 64 with Microsoft Office 2010 Starter - PPP (EDGI) Windows 7 Professional 64 with Microsoft Office 2010 St[...]
-
Página 13
Category Description Microsoft WHQL Serviceability End-user replaceable parts: AC adapter Battery (system) Hard drive Memory module Optical drive WLAN module WWAN module, SIM Keyboard 5[...]
-
Página 14
2 External component identification Display Component Description (1) WWAN antennas (2)* (select models only) Send and receive wireless signals to communica te with wireless wide-area networks (WWAN ). (2) WLAN antennas (2)* Send and receive wireless sign als to communicate with wireless local area networks ( WLAN). (3) Internal microphone(s) (1 or[...]
-
Página 15
Component Description (6) Internal display switch Turns off the display or initiates Sleep if the display is closed while the power is on. NOTE: The display switch is not visi ble from the outside of the computer. *The antennas are not visible from the outsid e of the comput er. For optimal transmission, keep the areas immedia tely around the anten[...]
-
Página 16
Lights Component Description (1) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state. ● Off: The computer is off or in Hibernation. (2) Caps lock light On: Caps lock is on. (3) Web browser light ● On: The computer is on. ● Off: The computer is off, in Suspend mode, or in Hiber nation . (4) Wireless light ?[...]
-
Página 17
Buttons, speakers, and fingerprin t reader (select models only) NOTE: Refer to the illustration that most closely matches your computer. Component Description (1) Power button ● When the computer is off, p ress the button to turn on the computer. ● When the computer is on, press the b utton briefly to initiate Sleep. ● When the computer is in[...]
-
Página 18
Component Description (3) Web browser button Opens the default Web browser. (4) Wireless button Tur ns the wireless feature on or off but does not e stablish a wireless connection. (5) Fingerprint reader (select models only) All ows a fingerprint logon to Windows, instead of a password logon. Keys Component Description (1) esc key Displays system i[...]
-
Página 19
Component Description (6) Windows applications key Dis plays a shortcut menu for it ems beneath the cursor. (7) num lk key Turns the embedded numeric keypad on an d off when pressed in combina tion with the fn key. Front Component Description (1) Drive light ● White: The hard drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily pa[...]
-
Página 20
Left Component Description (1) Security cable slot Attaches an opti onal security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not preve nt the computer from be ing mishandled or stolen. (2) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool inter[...]
-
Página 21
Right Component Description (1) USB 3.0 port Connects an optional USB device. For mo re information about USB devices, see the HP Notebook Reference Guide . (2) USB 2.0 port Connects an optional USB device. For mo re information about USB devices, see the HP Notebook Reference Guide . (3) Optical drive ( select models only) Reads an optical disc. N[...]
-
Página 22
3 Illustrated parts catalog Service tag When ordering pa rts or requestin g information, provide the comput er serial numbe r and model description provided on the service tag. ● Product name (1) . This is the product name affix ed to the front of the computer. ● Serial number (s/n) (2) . This is an alphanumeric identifier that is unique to eac[...]
-
Página 23
Computer major components Computer majo r components 15[...]
-
Página 24
Item Description Spare part number (1) Display panel , 33.8-cm (13.3-inch) HD, anti-glare 684251-001 (2) Keyboa rd (includes cable) NOTE: For a detailed list of available keybo ards, see Sequential part number listing on page 21 . 684252-xxx (3) Top cover (includes touchpad) For use in models with a fing erprint reader 684243-001 For use in models [...]
-
Página 25
Item Description Spare part number Intel Centrino Advanced-N 6235 670292-001 Ralink WLAN Ralink Ripple3 RT5390F_802.11 b/g/n 1x1 PCIe HMC 670691-001 Atheros AR9485 802.11b/g/n 1x1 WiFi Adapter 675794-001 (17) Latch Kit (includes knob, spring, and le ft and right latches) 686319-001 Heat sink (includes replacement thermal material) (18) For use in m[...]
-
Página 26
Display components Item Description Spare part number (1) Display b ezel (includes screw covers) 683858-001 (2) Webcam module 683508-001 Display Hinge Kit 684239-001 (3) Display hinge covers (left and right) (4) Display hinges (left and right) Screw covers (no t illustr ated) Plastics Kit Item Description Spare part number Plastics Kit 684241-001 ([...]
-
Página 27
Mass storage devices Description Spare part number (1) Hard drives 500-GB, 5400-rpm 683802-001 320-GB, 7200-rpm 634862-001 320-GB, 5400-rpm 645193-001 128-GB solid-state drive 684253-001 Hard Drive Hardware Kit (includes hard drive bracket and screws) 684238-001 (2) Optical drives (include bezel, br acket, and screws) DVD±RW Double-Layer Drive 684[...]
-
Página 28
Miscellaneous parts Description Spare part nu mber Notebook combin ation lock 591699-001 Cases Basic carr ying case 455084-001 Professional slim, top load case 592923-001 Nylon case 612757-001 Mice Mouse, optical 390632-001 Mouse, optical, travel 434594-001 AC adapt ers 65-W AC adapter 693711-001 65-W AC adapter for use in India and the People&apos[...]
-
Página 29
Sequential part number listing CSR flag designations: A = Mandatory B = Optional C = Service technician re commended N = Non-user rep laceable Spare part number CSR flag Description 390632-001 A Mouse, optical 434594-001 A Mouse, optical, travel 455084-001 A Basic carrying case 490371-001 A Power cord for use in North America 490371-011 A Power for[...]
-
Página 30
Spare part number CSR flag Description 657325-001 A Broadcom 4313GN 802.11b/g/n 1x1 WiFi and 20702 Blu etooth 4.0 Combo Adapter 664663-001 N Intel Celeron B840 processor, 1.9-GHz proc essor, 3-MB L3 cache (includes thermal material) 668969-001 A Ericsson F5321 HSPA+ with GPS 669831-001 A 6-cell, 51 WHr, 2.55 Ah Li-ion battery 670290-001 A Intel Cen[...]
-
Página 31
Spare part number CSR flag Description 684246-001 N Rubber Kit (includes bezel screw covers and base enclosure screw plugs) 684247-001 N Screw Kit 684248-001 N RTC battery 684249-001 A DVD±RW Double-Laye r Drive (i ncludes bezel, bracket, and screw s) 684250-001 A Blu-ray ROM DVD±RW SuperMulti DL Drive (includes be zel, bracket, and screws) 68425[...]
-
Página 32
Spare part number CSR flag Description 684253-001 A 128-GB solid-state drive 686319-001 N Latch Kit (includes knob , spring, and left and right latches) 691116-001 A Bottom door 692428-001 N Intel Pentium processor, B980, 2.4-GHz, 2-MB L3 cache (include s thermal material) 693710-001 A 65-W AC adapter for use in India and the People's Republic[...]
-
Página 33
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw driver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdr iver Service considerations The following sectio ns include some of the cons iderations[...]
-
Página 34
Cables and connectors CAUTION: When servicing the computer, be sure that c ables are placed in their prop er locations during the reassembly p rocess. Improp er cable placem ent can damage th e computer. Cables must be handle d with extreme care to avo id damage. Apply only the ten sion require d to unseat or seat the cables during removal an d ins[...]
-
Página 35
Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrost atic discharge (ESD). Circuitry design and st ructure determine the deg ree of sensitiv ity. Networ ks bu ilt into many integrated circuits provide some protection, bu t in many cases, ESD conta ins enough power to alter d evice parameters or melt[...]
-
Página 36
Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts an d assemblies wi th conductive or approv ed containe rs or packaging. ● Keep ESD-sensitive parts in their conta [...]
-
Página 37
Equipment guidelines Grounding equi pment must include eith er a wrist strap o r a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resi stance in the ground cords. To provid e proper ground, wear a strap snugl y against [...]
-
Página 38
Component replacement procedures This chapter provides removal an d replacement proced ures. There are as many as 95 screws and screw locks, in 15 different sizes, that must be removed, replaced, or loosened when servicing the computer . Make special note of each screw and screw lock size and location du ring removal and repl acement. Service tag W[...]
-
Página 39
Battery Description Spare part num ber 6-cell, 51 WHr, 2.55 Ah Li-ion batter y 669831-001 Before disa ssembling the co mputer, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devi[...]
-
Página 40
Using the optional security screw Use the optional security screw to lock the service doo r to the bottom of the computer. When not in use the security scr ew can be stored insid e the battery bay . Remove the battery: To use the security screw: 1. Remove the battery. 2. Remove the security screw fro m inside th e battery bay (1) and insert it (2) [...]
-
Página 41
Bottom door Description Spare part num ber Bottom door 691116-001 Before disa ssembling the co mputer, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the com[...]
-
Página 42
SIM NOTE: This section applies only to co mputer models with WWAN capability. NOTE: The SIM is provided by the en d-user as a security measure for the WWAN modul e. The SIM should be remove d, placed into a static-dissipa tive container, a nd then replac ed when the co mputer is reassembled. Before removing the SIM, follow these steps: 1. Shut down[...]
-
Página 43
Optical drive NOTE: All optical drive spare part ki ts include an optical drive b ezel, bracket , and screws. Description Spare part num ber DVD±RW Double-Layer Drive 684249-001 Blu-ray ROM DVD±RW SuperMulti DL Drive 684250-001 Before removing the optical drive, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e compu[...]
-
Página 44
4. Remove the optical drive (3) from the computer. Reverse this procedure to install an optical drive. 36 Chapter 4 Remova l and replacement procedures[...]
-
Página 45
Hard dr ive NOTE: All hard drive spare part kits incl ude a hard drive bracket and screws. Description Spare part num ber 500-GB, 5400-rpm hard drive, 7 mm 683802-001 320-GB, 7200-rpm hard drive, 7 mm 634862-001 320-GB, 5400-rpm hard drive, 7 mm 645193-001 128-GB solid-state drive 684253-001 Hard Drive Hardware Kit (includes hard drive bracket and [...]
-
Página 46
3. Pull the Mylar tab on the hard drive (2) toward the side of the computer to disen gage the hard drive from the connector, a nd then lift th e hard drive o ut of the hard drive bay. 4. If it is necessary to re place the hard dr ive cover, lift the Mylar tab to unlock it. 5. Remove the four Phillips PM3. 0×3.0 hard driv e cover screws (1) that se[...]
-
Página 47
6. Lift the top of the Mylar cover (2) from the drive, and then remove the cover from the h ard drive (3) . Reverse this procedure to rea sse mble and install the h ard drive. Memory modules NOTE: Primary and expansion memory is insta lled in a stacke d configuration in the bo ttom of the computer. Description Spare part num ber 2-GB (PC3-12800, 16[...]
-
Página 48
3. Remove the memory module (2) by pul ling the module a way from the slot at an angle. NOTE: Memory modules a re designed with a n otch to prevent incorrect in sertion into the memory module sl ot. NOTE: The computer us es two memory sockets. The top socket h ouses the expa nsion memory module and the bottom socket houses th e primary memory modul[...]
-
Página 49
WWAN module CAUTION: The WWAN module and the WL AN module are not in terchangeable . Description Spare part num ber Ericsson F5321 HSPA+ with GPS 668969-001 Sierra MC8355 (Gobi3000) HSPA/CDMA 634400-001 Before removing the WWAN module, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation,[...]
-
Página 50
4. Remove the WWAN module (3) by pulling the module away from the slo t at an angle. NOTE: WWAN modules are designed wi th a not ch to prevent inc orrect insertio n. Figure 4-1 Removing the WWAN module NOTE: If the WWAN antennas are not co nnected to the terminals on the WWAN module, the protective sleeves must be installed on the antenna connector[...]
-
Página 51
WLAN/Bluetooth combo card The computer uses a card that provides both WLAN and Blu etooth functionality. CAUTION: The WLAN module and the WWAN module are not inte rchangeable. Description Spare part num ber Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetoo th 4.0 Combo Adapter 655795-001 Broadcom 4313GN 802.11b/g/n 1x1 WiFi and 20702 Blueto oth [...]
-
Página 52
4. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules a re designed with a n otch to prevent incorrect in sertion. NOTE: If the WLAN antennas are not conn ected to the terminals on th e WLAN module, the protective sleeves must be installed on the antenna connectors, as sho wn in the following illustr[...]
-
Página 53
Keyboard NOTE: For a detailed list o f available keyb oards, see Sequential part number listing on page 21 . Description Spare part num ber Keyboard 684252-xx1 Before removing the keyboard, fo llow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down[...]
-
Página 54
6. Lift the top of the keybo ard at an angle (2) , and then pull the keyboard up to remove it from the palm rest (3) . NOTE: Only pull the keyboard up enough to releas e it from the compute r and flip it over o nto the palm rest. Under the ke yboard, the cable is conne cted to the system board. 7. Rotate the keyb oard until it rests on the palm re [...]
-
Página 55
Top cover NOTE: All top cover spare part kits in clude a touchpad . Description Spare part num ber Top cover for use in models with a fin gerp rint reader (includes touchpad) 68424 3-001 Top cover for use in m odels without a fi nger print reader (includes touchpad) 684244-00 1 Before removing the top cover, follow these steps: 1. Shut down the co [...]
-
Página 56
2. Remove the following covers an d screws that secure the top cover to the computer: (1) 4 rubber screw covers (2) 11 Torx T8M2.5×6.0 screws 48 Chapter 4 Remova l and replacement procedures[...]
-
Página 57
3. Remove the following scre ws that se cure the top cover to the computer: (1) 3 Phillips PM2.0× 2.0 screws from the battery bay (2) 3 Phillips PM2.0×2.0 screws from the optical drive bay 4. Position the compute r uprigh t with the fron t toward you. Component replacement procedures 49[...]
-
Página 58
5. Disconnect the following cables from the system board: (1) Power button/fu nction board ca ble (2) Audio board cable (3) Fingerprint reader bo ard cable 6. Remove the Torx T8M2.5×6.0 screw that secures the to p cover to the computer. 50 Chapter 4 Remova l and replacement procedures[...]
-
Página 59
7. Pry up on the top of the top cover (1) to di sengage it from the computer, and then remove the top cover from the computer (2) . Reverse this procedure to insta ll the top cover. Component replacement procedures 51[...]
-
Página 60
Fingerprint reader board NOTE: All fingerprint reader assembly sp are part kits include cable, bracket, a nd screws) Description Spare part num ber Fingerprint reader board (includes c able, bracket, and screws)) 683862-001 Before removing the fingerprint r eader board, follow these ste ps: 1. Shut down the co mputer. If you are unsure whether th e[...]
-
Página 61
4. Remove the read er board and cable assembly from th e top cover (4) . Reverse this procedure to in sta ll the fingerprint rea der board. Component replacement procedures 53[...]
-
Página 62
Audio board Description Spare part num ber Audio board (includes cable) 684245-001 Before removing the audio board, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connect[...]
-
Página 63
4. Rotate the a udio board upward (3) and then remo ve it from the top cover. Reverse this procedure to in stall the audio board. Component replacement procedures 55[...]
-
Página 64
Function board/Power button board Description Spare part num ber Function board/Power button b oard (includes cable) 684240-001 Before removing the function board and power butto n board, fo llow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down t[...]
-
Página 65
4. Remove the powe r button board from the top cover (3) . Reverse this procedure to insta ll th e function b oard/power button board. Component replacement procedures 57[...]
-
Página 66
RTC battery Description Spare part num ber RTC battery 684248-001 Before r emoving th e RTC bat tery, foll ow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the com[...]
-
Página 67
Speaker assembly Description Spare part num ber Speaker assembly 684242-001 Before removing the speaker assembly, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected[...]
-
Página 68
5. Lift the speakers from the compute r (4) . Reverse this procedu re to install the speake r assembly. Latch assembly NOTE: The Latch Kit includes the latch, knob, and spring. Description Spare part num ber Latch Kit 686319-001 Before removing the latch assembly, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e comput[...]
-
Página 69
NOTE: The latch assembl y includes a small spring . Note the locatio n of the spri ng. Remove the latch assembly: 1. Position the compute r right-side up, with the front to ward you. 2. Detach the spring hook (1) from the tab on the b ase enclosure (2) . 3. Rotate t he latch (3) and lift it from the computer. Reverse this procedure to insta ll the [...]
-
Página 70
4. Remove the batt ery (see Battery on page 31 ). 5. Remove the following compo nents: a. Bottom door (see Bottom do or on page 33 ). b. Hard driv e (see Hard drive on page 37 ) c. Optical drive (see Optical drive on page 35 ) d. Keyboard (see Keyboard on page 45 ) e. Top cover (see Top cover on page 47 ) When replacing the system board, be sure to[...]
-
Página 71
4. Lift the right side of the system board up at an angle (2) , and then lift the system board up and to the right to remove it (3) . Reverse this procedure to insta ll the system board. Heat sink NOTE: The fan an d heat sink are comb ined into on e assembly. All fan/he at sink spare p art kits contain replacement the rmal material. Description Spa[...]
-
Página 72
e. WWAN module (see WWAN module on page 41 ) f. Keyboard (see Keyboard on page 45 ) g. Top cover (see Top cover on page 47 ) h. System board (see Syste m board on page 61 ) Remove the heat sink: 1. Position the system board upside-down with the front toward you. 2. To remove the UMA h eat sink, skip to step 6. 3. To remove the d iscrete heat sink, [...]
-
Página 73
8. Lift the heat sink off the system board (3) . NOTE: For discrete models, thorough ly clean thermal material from the surfaces of the system board components (1)(3) and the heat sink (2)(4) each time you remove the hea t sink. All heat sink and processor spare part kits include th ermal material. NOTE: For UMA models, thoroughly clean thermal mat[...]
-
Página 74
Reverse this procedure to insta ll the heat sink. NOTE: To prop erly ventilate the comput er, allow at le ast a 7.6-cm (3-in) clea rance on the l eft side of the computer. The computer uses an electric fan for ventilation . Th e fan is controlled by a te mperature sensor and is designed to turn on automatically when high temp erature cond itions ex[...]
-
Página 75
Description Spare part num ber B970, 2.3-GHz, with 2-MB L3 cache 676785-001 Intel Celeron processor B840, 1.9-GHz, with 2-MB L3 cache 664663-001 Before removing the processor, follow these step s: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the [...]
-
Página 76
3. Lift the processor (2) straight up and remove it. NOTE: The gold tria ngle (3) on the processor must be aligne d with the triang le embossed on the processo r slot when you in stall the proc essor. Reverse this procedure to insta ll the processor. 68 Chapter 4 Remova l and replacement procedures[...]
-
Página 77
Display assembly All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables. Description Spare part number Display assembly, 33.8-cm (13.3-inch) HD, anti-glare 684251-001 Before removing the display assembly, follo w these steps: 1. Shut down the co mputer. If you are unsure wheth[...]
-
Página 78
3. Pull the antennas through the hole th at leads to the top of th e computer (2) . 4. Open the compute r as far as possible. 5. Disconnect th e display cable (1) from the system board and make sure the antenna cable s are all pulled throug h the hole (2) that routes to the bottom of the computer. 6. Remove the three Torx T8M2.5×6.0 screws (1) tha[...]
-
Página 79
7. Lift the display assembly straigh t up and remove it (2) . CAUTION: When i nstalling the display a ssembly, be sure that the wi reless antenna cables are routed and a rranged pr operly. Failure to properly route the ant enna s can result in degradatio n of the computer's WLAN and WWAN perf ormance. Component replacement procedures 71[...]
-
Página 80
8. If you need to remove the hinge covers from the d isplay hinges, pull th e hinges straight up and off the di splay to r emove the m. Display hinge covers ar e available in the Displa y Hinge Kit using spare part number 684239-001. 9. To replace the disp lay bezel, remove the two screw covers (1) and the two Phillips PM2.5×4. 0 screws (2) from t[...]
-
Página 81
10. Flex the top (1) of the bezel, the inside edges of the left and right side s (2) , and then the bot tom (3) of the bezel until it disengages from the displa y enclosure. 11. Remove the display beze l (4) . The bezel is avail able using sp are part number 68 3858-001. Component replacement procedures 73[...]
-
Página 82
12. If it is necessar y to replace the we bcam module from th e display enclosure , disconnect the cable from the module (1) , and then gently pull the mo dule away from th e double-sided tape on the display enclosure (2) . The webcam module is a vailable using spar e part number 6835 08-001. 13. If it is necessary to replace the di splay hing es, [...]
-
Página 83
15. Disconnec t the display pa nel cable by rotat ing the display enclosure (1) , lifting the tape (2) that covers the connector, and disconn ecting the cable from the panel (3) . 16. Remove the two Phillips PM1.6×1.5 screws (1) that secure each display hing e to the displ ay panel. Component replacement procedures 75[...]
-
Página 84
17. Remove the display hin ges (2) . Display hinges are avai lable in the Display Hing e Kit using spa re part number 6842 39-001. Reverse this procedure to rea ssemble an d install the d isplay assembly. 76 Chapter 4 Remova l and replacement procedures[...]
-
Página 85
Power connector Description Spare part num ber Power connector cable (includes bracket and screws) 683859-001 Before removing the power cable, follow th ese steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect a[...]
-
Página 86
4. Remove the power ca ble assembly from the comp uter (3) . NOTE: Note the locatio n of the cable ro uting channel for reassembly. Reverse this procedure to in stall the power connector cable. 78 Chapter 4 Remova l and replacement procedures[...]
-
Página 87
5 Computer Setup (BIOS) and Advanced System Diagnostics Using Computer Setup Computer Setup, or Basic Input/Ou tput System (BIOS), controls communication betwe en all the inpu t and output devices on the system (such as disk drive s, display, keyboard, mous e, and printer). Computer Setup includes settings for the types of devices installed, the st[...]
-
Página 88
To exit Computer Setup menu s, choose one of the following method s: ● To exit Computer Setup menus without saving your chan ges: Click the Exit icon in the lower-left corn er of the screen, and then follow the o n-screen instructions. – or – Use the tab key and the arro w keys to select File > Ignore Changes and Exit , and then press ente[...]
-
Página 89
Updating the BIOS The next sections describ e different ways of updating the BIOS. Downloading SoftPaqs to update the BIOS Most BIOS update s on the HP website are packaged in compre ssed files called SoftPaqs . To install BIOS updates from the HP website, follow the steps b elow: 1. Download th e SoftPaq from the HP website. 2. Click Run , and the[...]
-
Página 90
5. Locate the .sig file in the ROM.cab file and rename it with the same prefix as the .b in file (for example, 68CDD.sig). Copy th e renamed file to the Hewlett-PackardBIOS New folder in either the HP_Tools partition of the hard drive, or the USB flash drive. 6. Restart the computer, and then p ress esc while the “Press the ESC key for Startup[...]
-
Página 91
Downloading a BIOS update CAUTION: To reduce the risk of damage to the computer or an u nsuccessful installation, downlo ad and install a BIOS update only when the computer is connected to reli able external power u sing the AC adapter. Do not d ownload or install a BIOS up date while the computer is running on batte ry power, docked in an optional[...]
-
Página 92
Main menu Select To do this System information ● View and change the system time and date. ● View identification information about your computer. ● View specification information about the pro cessor, memory size, and system BIOS. Security menu Select To do this Administrator password Control access to Setup Utility. Power-on password Control[...]
-
Página 93
You can view system information and error logs in the Advanced System Diagnostics window. To start Advanced System Diagnostics: 1. Turn on or restart the compu ter. While the “Press the ESC ke y for Startup Me nu” message is displayed in the lo wer-left corner of the screen , press esc . When the Startup Menu is d isplayed, press f2 . 2. Click [...]
-
Página 94
6 Specifications Computer specifications Metric U.S. Dimensions Length 22.9 cm 9.0 in Width 32.6 cm 12.8 in Height (front to rear) 2.5 to 3.3 cm 1.0 to 1.3 in Weight (equipped with optical drive, 1 SODIMM, hard drive, WLAN module, 6 cell battery) 2.0 kg 4.5 lbs Input power Operating voltage 19.0 V dc @ 4.74 A – 90 W or 18.5 V dc @ 3.5 A - 65 W Op[...]
-
Página 95
Metric U.S. Nonoperating 1.50 g zero-to-peak, 10 Hz to 500 H z, 0.5 oct/min sweep rate NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer opera tes well within this range of temperatures. 33.8-cm (13.3-in), HD display specifications Metric U.S. Active diagonal size 33.8-cm 13.3-in Resolution 1366x768[...]
-
Página 96
Hard drive specifications 320-GB* Dimensions Height 9.5 mm Width 70 mm Weight 92 g Interface typ e SATA Transfer rate 100 MB/sec Security ATA sec urity Seek times (typical read, including setting) Single track 1.5 ms Average 13 ms Maximum 27 ms Logical blocks 625,142,448 Disc rotational speed 5400 rpm or 7200 rpm Operati ng temper ature 5°C to 55?[...]
-
Página 97
DVD±RW and CD-RW SuperMulti DL Combo Drive specifications Applicable disc Read: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD- ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD -EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, D VD- ROM (DVD-5 , DVD-9, DVD-10 , DVD-1 8), DVD- R, DVD-RW, DVD+R, DVD +RW, DVD- RA[...]
-
Página 98
Blu-ray ROM DVD±RW SuperMulti DL Drive Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I , CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD -RW, DVDROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, HD- ROM (Single La[...]
-
Página 99
Specification information in Device Manager Device Manager allo ws you to view and control the hard ware attached to th e computer, as we ll as provides hardw are specificat ion information. You can also a dd hardware or modify devi ce configurations u sing Device Manager. NOTE: Windows 7 includes the User Acco unt Contro l feature to im prove the [...]
-
Página 100
7 Backup and recovery To protect you r information, use Windows Backup and Restor e to back up individu al files and folder s, back up your entire hard drive (s elect models only), cr eate syst em repair discs (select models only) by using the installed optical drive (select models only) or an optional external optical drive, or create system resto[...]
-
Página 101
Creating recovery media with HP Recovery Disc Creator HP Recovery Disc Creator is a software program th at offers an alternative way to create recover y media. After you successfull y set up the co mputer, you ca n create recovery media using HP Recovery Disc Creator. This reco very media perf orms a system reco very if the hard drive becomes corru[...]
-
Página 102
Backing up your information Recovery after a system failure is as good as your most recent backup. Immediately after software setup, you should create system repair discs (select models only ) using HP Recovery Disc Creator and the insta lled optical drive (selec t models only) or an optional e xternal optic al drive to ba ck up your system. As you[...]
-
Página 103
Performing a system recovery In case of system failure or inst ability, the computer provides the following tools to recover your files: ● Windows recovery to ols: You can use Wi ndows Backup and Re store to reco ver information you have previously backed up . You can a lso use Win dows Startup Repair to fix problems that might prevent Windows fr[...]
-
Página 104
Using f11 recovery tools CAUTION: Using f11 recovery tools completely era ses hard drive contents and reformats the hard drive. All files you ha ve created and an y softwa re installed on the computer are permane ntly removed. The f11 recovery tool reinstalls the operatin g system and HP programs and drivers that were installed at the fa ctory. Sof[...]
-
Página 105
After the repair is completed: 1. Eject the Windows 7 ope rating system DVD, and then insert the Driver Recovery disc. 2. Install the Hardwa re Enabling Drivers first, and then install Recommended Ap plications. Performing a system recovery 97[...]
-
Página 106
8 Power cord set requirements The wide-range input fe ature of the computer perm its it to operate from any line voltage from 100 to 120 volts ac, or from 220 to 240 volts ac. The 3-conductor powe r cord set included wi th t he computer meets the requirem ents for use in the country or region where the e quipment is purchased . Power cord sets for [...]
-
Página 107
Requirements for specific countries and regions Country/region Accredited agency Applicable note nu mber Argentina IRAM 1 Australia SAA 1 Austria OVE 1 Belgium CEBEC 1 Brazil ABNT 1 Canada CSA 2 Chile IMQ 1 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 India ISI 1 Israel SII 1 Italy IMQ 1 Japan JIS 3 The Netherlands KEMA 1 New Zeal and[...]
-
Página 108
Country/region Accredited agency Applicable note nu mber The United States UL 2 1. The flexible cord must be Type HO5VV-F, 3 -conductor, 0. 75mm2 conductor size. Power cord set fittings (ap pliance coupler and wall plug) must bear the ce rtif ication mark of the agency responsible for evaluation in the country or r egion where it will be used. 2. T[...]
-
Página 109
9 Recycling Battery When a non-rechargeable or rechargeable ba ttery has reached the en d of its useful life, do not dispose of the batte ry in general house hold waste. Follow the local laws and regu lations in your area for battery disposal. HP encourages customers to recycle used electron ic hardware, HP original print cartridges, and rechargeab[...]
-
Página 110
Perform the following ste ps to di sassemble the display assembly: 1. Remove all screw covers (1) and screws (2 ) that secure the display bezel to the display assembly. 2. Lift up and out o n the left and ri ght inside edges (1) and the top and b ottom inside edge s (2) of the display beze l until the bezel disengag es from the display assemb ly. 3[...]
-
Página 111
4. Disconnect all disp lay panel cables (1) from the display i nverter and remove the in verter (2) . 5. Remove all screws (1) that secure the display panel a ssembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Position the display pan el assembly upsi de-down. 8. Remove all screws that secure t[...]
-
Página 112
10. Remove the display pan el frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlig ht cover (2) and swing it outward. 13. Remove the backlight cover. 14. Position the display panel righ t-side up. 104 Chapter 9 Recycling[...]
-
Página 113
15. Remove the backlight cables (1) from the clip (2) in the display panel . 16. Position the d isplay panel upside-d own. WARNING ! The backlight contains mercury. Exercise caution when removing and handling t he backlight to avoid damag ing this compon ent and causin g exposure to the mercu ry. 17. Remove the backlight frame from th e display pan[...]
-
Página 114
18. Remove the backlight from the backlight frame. 19. Disconnec t the display pa nel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display re ar panel. 21. Release the LCD panel (3) from the d isplay rear panel. 22. Release the tape (4) that secures th e LCD panel to the display rea r panel. 23. Remove th[...]
-
Página 115
Index A AC adapter light 13 AC adapter, spare part numbers 20, 24 advanced system diagnostics 84 antennas disconnec ting 4 1, 43 audio board remov al 54 spare part number 16, 22, 54 audio, product description 2 audio-in (microphone) jack 11 audio-out (head phone) jack 11 B Backup and Restore 94 base enclosure, spare p art number 16, 22 battery remo[...]
-
Página 116
function keys identifying 10 G graphics, pr oduct description 1 grounding equip ment and methods 29 H hard drive precautions 26 product description 2 remov al 37 spare part numbers 16, 19, 37 specifications 88 hard drive cover, removal 38 Hard Drive Hardware Kit, spare part numbe r 19, 22, 37 hard drive recovery 96 HDMI port, identifying 12 heat si[...]
-
Página 117
webcam 2 wireless 2 product name 1 R recovery partition 96 removal/replacement preliminaries 25 procedures 30 restoring the ha rd drive 96 RJ-45 (network) jack, identifying 12 RTC battery remov al 58 spare part number 16, 23, 58 Rubber Kit, spare part numb er 23 S Screw Kit, spare part number 20, 23 Secure Digital card insert, illustrated 18 securi[...]