HP (Hewlett-Packard) AA-RTDRB-TE manual

user guide hp S tor age W or ks embedded w eb se r v er Product V ersion: FW V05 . 01.00- 2 4/HAFM S W V0 7 . 01.00-09 Second Editi on (June 2003) Pa r t N u m b e r : AA-R TDRB- TE This gui de desc r ibes th e Embedded W eb Serve r (EWS) and its f eatur e s. It tells y ou h ow t o use EW S to confi gure , oper ate , and monitor Stor age Ar ea Netw[...]

© Cop yr igh t 2001- 200 3 Hew lett-P ac kar d De velopmen t Compan y , L.P . Hewlett-P ackar d Company mak es no warr anty of any kind with r egard to this mater ial, including , but not lim ited to, the implied w arr anti es of mer chanta bility and fitness fo r a particular pur pose. Hewlett-P ackar d shall not be li able f or err or s containe[...]

3 Embedded W eb Serve r User Guide contents Contents About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Intended Audience . . . . . . . . [...]

Content s 4 Embedded W eb Server Us er Guide 2 Configuring the Product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Factory Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Configuring Ports . . . . . . . . . . . . . . . . .[...]

Content s 5 Embedded W eb Serve r User Guide 4 Viewing Product and Fabric Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Viewing Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Viewing a Representation of the Product. . . . . . . . . . . . .[...]

Content s 6 Embedded W eb Server Us er Guide 6 Operating and Managing Products and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Key Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 Setting Product Beacon[...]

Content s 7 Embedded W eb Serve r User Guide 21 Modify Zone tab view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7 22 Zone Set tab view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 9 23 Switch tab view for an Edge Switch 2/[...]

Content s 8 Embedded W eb Server Us er Guide[...]

9 Embedded W eb Serve r User Guide about this guide About this Guide About this Guide This user guide provides information to help you: ■ Use the Embedded W eb Server (EWS) to conf igure and manage the follo wing HP StorageW orks products: —D i r e c t o r 2 / 6 4 —D i r e c t o r 2 / 1 4 0 — Edge Switch 2/16 — Edge Switch 2/24 — Edge S[...]

Abou t th is G uid e 10 Embedded W eb Server Us er Guide Overvie w This section cov ers the follo wing topics: ■ Intended Audience ■ Related Documentation ■ Related Documentation Intended Audience This book is intended for use by data center administrators, LAN administrators, operations personnel, and customer supp ort personnel who administ[...]

Abou t th is G uid e Embedded W eb Serve r User Guide 11 Conv entions Con ventions consist of the following: ■ Document Con ventions ■ T ext Symb ols ■ Equipment Symbols Docum ent Conv entions The document co n ven tions included in Ta b l e 1 apply in most cases. T able 1: Doc ument Conventions Element Conv ention C ro s s- re f e ren c e l [...]

Abou t th is G uid e 12 Embedded W eb Server Us er Guide Tex t S y m b o l s The follo wing symbols may be foun d in th e text of this guide. They ha ve the follo wing meanings. WA R N I N G : T e xt set off in this mann er indicates that failur e to follo w dir ecti ons in the w arning co uld r esult in bodil y harm or death . Caution: T ext set o[...]

Abou t th is G uid e Embedded W eb Serve r User Guide 13 An y surf ace or area o f the equipmen t mark ed w ith these s y mbols indi cates t he pr esen ce of a hot sur face or h ot compon ent . Co ntac t with this surf ace could r esult in inj ury . WA R N I N G : T o redu ce the r isk of pe rs onal inju ry fr om a ho t compone nt , allow the s ur [...]

Abou t th is G uid e 14 Embedded W eb Server Us er Guide Getti ng Hel p If you still hav e a question after reading th is guide, contact an HP authorized service provider or access our website: ht tp://w ww . hp .com . HP T ec hnical Suppor t In North America, call tech nical support at 1-800-652-6672 , av ailable 24 hours a day , 7 day s a week. N[...]

Abou t th is G uid e Embedded W eb Serve r User Guide 15 HP Author ized R eseller For the name of your nearest HP authorized reseller: ■ In the United States, call 1-800 -345-1518 ■ In Canada, call 1-800-263-5 868 ■ Elsewhere, see the HP website for locations and telephone numbers: ht tp :/ /w w w .h p .c om .[...]

Abou t th is G uid e 16 Embedded W eb Server Us er Guide[...]

17 Embedded W eb Serve r User Guide 1 Intr oduc tion Overvie w The Embedded W eb Server (EWS) is a web-based graphical user interface (GUI), based on HTML, that enables the user to administer p roducts, monitor products and ports, and perform tasks to manage a simple Storage Area Network (SAN). Y ou can also use EWS to perform troubleshooting tasks[...]

Intr oduc tion 18 Embedded W eb Server Us er Guide — Parameters for p roduct management through Simple Netw ork Management Protocol (SNMP), the Co mmand Line Interf ace (CLI), the Open System Management Server (OSMS) feature, or the Fibre Connection (FICON) Management Server (FMS) feature. Note: The Edge Switch 2/24 does not s uppor t out-of-ba n[...]

Intr oducti on 19 Embedded W eb Server User Gui de Vie wing the User Interface When the EWS interface opens, the default display is the Vi e w pa ge. Figure 1 sho ws an example EWS vie w with labels fo r the various parts of the image. T his example sho ws the Conf igure > Switch > Identif ication screen for the Edge Switch 2/24. F or other p[...]

Intr oduc tion 20 Embedded W eb Server Us er Guide — Monitor — At the Monitor page, the Por t L is t (default), Por t S t a t s , Log , and Node List task selection tabs display . — Operations — At the Operations page, the Director or Switch (def ault), Po rt , Maintenance , and F eatur e Installation task selection tabs display . — Help [...]

Intr oducti on 21 Embedded W eb Server User Gui de ■ Protects the authorized rights of user s to perform tasks through roles def ined as operators an d administrators. (This protection en ables co mpanies to decide who sh ould perform e veryday tasks, such as monitoring product status , and sensiti ve tasks, such as installing firmw are updates. [...]

Intr oduc tion 22 Embedded W eb Server Us er Guide Stor age Area Network (S AN) A high-performance data communications en vironment that interconnects computing and storage resources so that the resources can be effecti vely shared and consolidated. Zon e ( Zon i ng ) A zone is a group of de vices or zone members in a SAN that can communicate and a[...]

Intr oducti on 23 Embedded W eb Serve r User Guide Wher e to Start Depending upon whether the He wlett-Pack ard prod uct you purchased has already been installed, you may need to go to a specific chapter . If the product has not been installed, you should start at Chapter 2 . If the product was installed, then man y of the conf iguration tasks were[...]

Intr oduc tion 24 Embedded W eb Server Us er Guide After a connection is made between th e web browser and the product, the Enter Network Password dialog box displays as sho wn in Figure 1 . Figur e 2: Enter N etwork P ass word dialog bo x 4. T ype the user name and p assword . The EWS interface opens with the Vi e w page displaye d, as shown in Fi[...]

25 Embedded W eb Server User Guide 2 Configuring the Pr oduc t This chapter describes ho w to conf igure an HP product using the EWS interface. These procedures can be us ed to conf igure a product after installation and as changes are needed. Y ou can use the tabs of the Configure page to con figure the follo wing aspects of a director or edge swi[...]

Conf igur ing the Pr oduct 26 Embedded W eb Server Us er Guide Fac t o r y D ef a u l t V a l u e s HP products on a SAN ha ve preset, def au lt conf iguration v alues that were set in the factory . The items that hav e factory-set default va lues are: ■ Passw ords (customer and maintenance-le vel) ■ Internet Protocol (IP) address ■ Subnet ma[...]

Configu ring t he P roduct 27 Embedded W eb Ser ver Us er Guide Fi gure 4: Configu re P or ts tab v iew a. F or each port to be conf igured, ty pe a port name of 24 alphanumeric characters or less in the associated Name fi e ld . Note: When naming ports, y ou ma y want t o name each port based on the de v ice attached to the port. F or ex ample , i[...]

Conf igur ing the Pr oduct 28 Embedded W eb Server Us er Guide d. Click a check bo x in the 10-100 km column to define extended distance bu ffering. (This column is not a v ai lable on the Edge Switch 2/24.) A check mark in th e box indicates e xtended d istance b uf fering is enable d. Y ou can enable extended di stance for a port e ven if it is n[...]

Configu ring t he P roduct 29 Embedded W eb Ser ve r User Guide 3. Click Activ ate to sav e and acti vate the changes. The follo wing message displays: Your changes to the port configur ation have been successfully activated . 4. If the product is of fline, se t the product online as follo ws: a. Choose Operations from the na vig ation panel. The O[...]

Conf igur ing the Pr oduct 30 Embedded W eb Server Us er Guide a. T ype a name of 24 alphanumeric characters or less in the Name fie ld . Each product should be conf igured with a unique name. If the product is installed on a pub lic LAN, it is recommended t hat the name reflect the prod uct’ s Ethernet network domain name system (DNS) host name.[...]

Configu ring t he P roduct 31 Embedded W eb Server User Gui de Configuring Date and T ime Perform this procedure to co nfig ure the ef fecti ve d ate an d time for the pr oduct. T o set the date and time: 1. Choose Conf igure from the navigation panel. Choose th e Switch or Director tab, as appropriate. Click the Date/Time tab to display the Date/ [...]

Conf igur ing the Pr oduct 32 Embedded W eb Server Us er Guide Configuring Operating P arameters Perform this procedure to conf igure the product’ s preferred domain ID, insistent domain ID, rerouting delay , and domain registered state change notif ications (RSCNs). The product must be set offlin e to conf igure the preferred domain ID. T o conf[...]

Configu ring t he P roduct 33 Embedded W eb Ser ver Us er Guide Note: If the product is at tached to a fabr ic element , the product and e lement must have uniqu e domain IDs. If the v alues ar e not uniq ue , the E_P ort connecti on to the elemen t cann ot carry traffi c a nd the product c annot com municate with the fabr ic. b. A t t h e Insisten[...]

Conf igur ing the Pr oduct 34 Embedded W eb Server Us er Guide e. At the Suppr ess RSCNs on Zone Set Activ ations fie l d , c ho o s e Enabled or Disabled . When this parameter is enabled, RSCN messages are prohibited from being sent to port s on the switch following an y change to the fabric's acti v e zone set. Consult wit h your HB A and st[...]

Configu ring t he P roduct 35 Embedded W eb Ser ver Us er Guide Configuring F abric P arameters Perform this procedure to conf igure the fabr ic operating parameters, including resource allocation time out v alue (R_A_T O V), E_D_TO V , product priority , and interop mode. The product must be set of fline. T o config ure parameters: 1. If product i[...]

Conf igur ing the Pr oduct 36 Embedded W eb Server Us er Guide b. A t t h e R_A _TO V field, type a v alue between 10 through 1200 tenths of a second (1 through 1 20 seconds). (The R_A_T O V v alue must be greater than the E_D_T O V v alue.) Note: If the pr oduct is at tached to a fabri c elem ent , the product and element must be set to th e same [...]

Configu ring t he P roduct 37 Embedded W eb Server User Gui de Note: The operatio n mo de pa rameter in the EWS in terfac e i s e quivalent to th e manag emen t styl e par amet er in t he HAFM int erf ace . T he S/3 90 m ode us ed f or the EW S interface is equi v alent to the FICON management s tyle in the HAFM. This setting only af fects the mode[...]

Conf igur ing the Pr oduct 38 Embedded W eb Server Us er Guide Configuring Net wor k Information V erify the type of LAN installation with the customer’ s network administrator . If one HP product is installed on a dedicate d LAN, network informatio n (IP address, subnet mask, and gatew ay addres s) does not require change. If multiple HP product[...]

Configu ring t he P roduct 39 Embedded W eb Ser ver Us er Guide 3. Click Activ ate to sav e and activ ate the chan ges. The following message bo x displays ( Figure 10 ). Figur e 10: Net work infor mation m essage box 4. Update the address resolutio n protoc ol (ARP) table for the browser PC. Delete the product’ s old IP address from the ARP tab [...]

Conf igur ing the Pr oduct 40 Embedded W eb Server Us er Guide Configuring SNMP Perform this procedure to conf igure co mmunity names, write authorizations, network addresses, and user datagram prot ocol (UDP) po rt numbers for up to six SNMP trap message recipients. A trap reci pient is a management workstation that recei ves notif ication (throug[...]

Configu ring t he P roduct 41 Embedded W eb Server User Gui de Note: Spaces are allo wed in the Community Name fie l d. c. Click the check box in the Write A uthorization column to enable or disable write authorizatio n for the trap recipient (default is disabled). A check mark indicates write authorizatio n is enabled. When the feature is enabled,[...]

Conf igur ing the Pr oduct 42 Embedded W eb Server Us er Guide Enabling or Disabling the CLI Perform this procedure to enable or di sable the state of the product’ s command line interface (CLI). T o change the CLI state: 1. Choose Configur e from the navigation panel. 2. Click the Management tab and the CLI tab . The CLI tab vie w displays ( Fig[...]

Configu ring t he P roduct 43 Embedded W eb Server User Guide Enabling or Disabling Host Contr ol Perform this procedure to en able or disable host control of the product through the OSMS. The OSMS is a ke yed feature that allo ws host control and inband management of the director or switch through a manage ment application that resides on an open-[...]

Conf igur ing the Pr oduct 44 Embedded W eb Server Us er Guide Zoning T ab Vie w The functionality pro vided by the Zoning tab vie w is described in Chapter 3 . Configuring User Rights EWS has two login IDs, the administrato r -le vel ID and the operator -le vel ID. These user names a nd passwords are used to ac cess the EWS interface through the E[...]

Configu ring t he P roduct 45 Embedded W eb Ser ve r User Guide 3. For the Administrator set of data f ields: a. T ype the administrator user name (as specified by the customer’ s network administrator) in the New User Name field. Use 16 alphanumeric characters or less. b . T ype the administrator password (as specified b y the customer’ s netw[...]

Conf igur ing the Pr oduct 46 Embedded W eb Server Us er Guide User Rights Settings Ta b l e 2 lists the management func tions pr ovided b y EWS along with the access permissions for each functio n. If a user lacks the rights to access a specific function, they will recei ve a login pa ssword dialog box indicating the ri ghts (either administrator [...]

Configu ring t he P roduct 47 Embedded W eb Server User Guide Binding P orts to Dev ices The P ort Binding tab vie w enables you to bind a specif ic switch or director port to the WWN of an attached de vi ce for exclusi ve communication. T o configure po rt binding: 1. Choose Configur e from the navigation panel. 2. Choose the Security tab and the [...]

Conf igur ing the Pr oduct 48 Embedded W eb Server Us er Guide Figur e 15: Configuring P ort Binding 3. Click the check box in the P ort Binding column next to the port number to enable port binding for the port. 4. Identify the WWN to which the port is bound using one of the follo wing methods: ■ Enter the WWN to which the port is to bind in the[...]

Configu ring t he P roduct 49 Embedded W eb Server User Gui de Configuring Open T r unking The Open T runking page enables you to configur e open t runking settings. Open T runking is an option al software featur e that is enabled using a feature k ey . The purpose of Open T runking is to make ef f icient use of redundant interswitch links (ISLs) b[...]

Conf igur ing the Pr oduct 50 Embedded W eb Server Us er Guide Note: F or the Dir ecto r 2/140, ports ar e displa yed t hrou gh sev er al pages in gr oup s of 3 2 . T o configur e all of the po rts, mak e sur e you go t hro ugh each set . Y ou mu st cli ck Acti v ate for eac h vi ew bef or e mov ing to the ne xt . T o configure Open T runking: 1. C[...]

Configu ring t he P roduct 51 Embedded W eb Server User Gui de 5. Choose Enabled or Disabled from the Backpr essure Ev ent Notification drop do wn list. If enabled, a backpressure entry is made in the e vent log and, if SNMP is configured, an SNMP trap is generated. Backpressure occurs when the threshold of una v ailable BB_ Credits is exceeded for[...]

Conf igur ing the Pr oduct 52 Embedded W eb Server Us er Guide Installing Featur e K e y s Perform this procedure to install one or more of the follo wing optional features: ■ OSMS — The Open Systems Management Server feature allo ws open systems host control of the produ ct. ■ FICON Management Serv er — The FICON Management Server feature [...]

Configu ring t he P roduct 53 Embedded W eb Server User Gui de The feature key can be installed while the product is online, e xcept in the follo wing circumstances: ■ W ith E/OS 3.0 or earlier , the product must be of fline before a feature can b e enabled. ■ If the ne w feature ke y remov es existin g functionality , the product must be offli[...]

Conf igur ing the Pr oduct 54 Embedded W eb Server Us er Guide 3. T ype the feature k ey and cli ck Activate . The interface displays a conf irmation page with a w arning, stating this ac tion ov errides the current set of product features. Note: When Activate is selected , all c urr ent f eatur es ar e r emo ved and r epl aced with the f eatur es [...]

55 Embedded W eb Ser ver Us er Guide 3 Configuring Z ones Understanding Zoning Designing zoning can be a comple x task, especially for multiswitch fabrics. Consult with your m anaged produc t vendor’ s profes sional services organization before conf iguring zoning. This section is de signed to help you unde rstand the following co ncepts so that [...]

Configu ring Zones 56 Embedded W eb Server Us er Guide Zoning allo ws an administrator to: ■ Establish barriers between de vices that use different operating systems. F or example, it is often critical to separa te servers and storag e devices with different operating systems because acci dental transfer of information from one to another can del[...]

Confi guring Z ones 57 Embedded W eb Serve r User Guide Figure 19 illustrates how zones can consist of port s and/or de vices installed on ports in three managed products in a multiswitch f abric. zoning throu gh a multiswitch fabric Figur e 19: Zoning through a multis witch fabric Zone 1 Interswitch Link Zone 3 Zone 2 Director Director Director[...]

Configu ring Zones 58 Embedded W eb Server Us er Guide Controlling Access at the Switch A port binding feature is a v ailable on switches and directors that allo ws you to bind a specific switch or director port to the WWN of an attached device for exclusi v e communication. This Port Bi nding feature is a v ailable through the Po r t Binding tab, [...]

Confi guring Z ones 59 Embedded W eb Server Us er Guide Access can also be controlled at the storage de vice as an addition or enhancement to redundant array of inde pendent disks (RAID) controller software. Data access is controlled within the storage de vice, and serv er HB A access to ea ch LUN is explicitly limited (access is blocked by default[...]

Configu ring Zones 60 Embedded W eb Server Us er Guide Naming Conv entions for Z ones and Zone Sets The follo wing naming con ventions apply to zones and zone sets: ■ All names must be unique and may not dif fer by case only . F or example, myzone and MyZone are both v alid in di vidually , but the y are not unique. ■ The f irst character of a [...]

Confi guring Z ones 61 Embedded W eb Server User Gui de In EWS the WWN displays with the switch or director manufacturer’ s name before the WWN. The WWN is assigned to the Fibre Channel interf ace or HBA installed in de vices such as servers or storage de vices. Although the device may also hav e a node WWN, this WWN is not used for zoning identi[...]

Configu ring Zones 62 Embedded W eb Server Us er Guide A disadv antage of port zoning is that someone may rearrange ca ble connections to ports (because of port failures or other re asons) and inadvertently allo w de vices to communicate that should not ha v e access to each other . Note: If a manage d pr oduct ’s Domain ID c hanges , yo u mus t [...]

Confi guring Z ones 63 Embedded W eb Ser ve r User Guide The follo wing are some important poin ts to remember about zone sets: ■ If no zone set is acti ve , and the default zone is disabled, then no de vices can communicate. ■ If you activ ate a zone set when there is already an activ e zone set, that set will replace the currently-activ e zon[...]

Configu ring Zones 64 Embedded W eb Server Us er Guide Rules f or M erging Z oned Fabrics Certain rules are enforced to ensure that zoning is consistent across the f abric. Ta b l e 3 on page 64 summarizes rules for joining tw o fabrics through an IS L. The follo wing terms are used in the table: ■ Not zoned — No zone set is activ e in the fabr[...]

Confi guring Z ones 65 Embedded W eb Server User Gui de Note: If mer ging z ones w ill result in segme nted E_P orts and the f abr ics w ill not jo in , y ou can join t he fa br ics b y deacti vatin g the acti ve z on e set on one of t he fab ri cs (def ault z one is ena bled). This eliminat es an y confli cts beca use the f abr i cs will th en jo [...]

Configu ring Zones 66 Embedded W eb Server Us er Guide Figur e 20: Configuring zones 3. T o configure a zone, f irst add the zone name to the product configuration. The follo wing naming con v entions apply to zones and zone sets: ■ All names must be unique and may not dif fer by case only . For examp le, zone-1 and Zone-1 are both v alid indi vi[...]

Confi guring Z ones 67 Embedded W eb Serve r User Guide 4. T ype the zone name and click Add New Zone . After the name is v alidated, the ne w zone name ( Zone-1 ) and an associated Delete b utton display at the bottom of the page. Note the follo wing: ■ Sa ve and activ ate the zone — Changes to a zone or zoning configuration are not sav ed and[...]

Configu ring Zones 68 Embedded W eb Server Us er Guide Rename the zone — T o rename a conf igured zone, type the ne w name in the Zone f ield and click Rename Zone . After the name is va lidated, the zone name is changed. 6. Nodes may be local to this product or th e y may be attached to a remote fabric member . Add or delete zone members as foll[...]

Confi guring Z ones 69 Embedded W eb Server Us er Guide Configuring Z one Sets Perform this procedure to conf igure, chan ge, enabl e, or disable zone sets. A zone set is a group of zones that is acti v ated or deactiv ated as a singl e entity across all managed products in either a single switc h or a multiswitch fabric. Only one zone set can be a[...]

Configu ring Zones 70 Embedded W eb Server Us er Guide ■ Enable or disable default zone — T o toggle (enable or disable) the default zone state, click Enable Default Zone or Disable Default Zone . Depending on the t oggle state, the Default Zone f ield changes to Enabled or Disabled . ■ Disable zone set — T o disable the activ e zone set an[...]

71 Embedded W eb Serve r User Guide 4 V ie wing Pr oduc t and F abr ic Data This chapter describes ho w to use the Em bedded W eb Server to vi ew informatio n related to the configurati on, status, an d communications of a product using the Vi e w page. Y ou can use EWS to vie w conf iguration information for the product and the fabric in whic h th[...]

Vi ew ing Pr oduct and F a bri c Data 72 Embedded W eb Server Us er Guide Viewi ng Pro du c t In fo rma ti o n The Vi e w panel of the EWS interface enables you to see a representation of the physical product, wheth er a director or switch, and view the v arious IDs and confi guration items for the product. Vie wing a R epresentat ion of the Produc[...]

Vie wing Product and Fabr ic Data 73 Embedded W eb Server User Gui de ■ Name — The user-def ined name or descriptio n assigned to the product. ■ Front V iew and Rear V iew — Using this graphical view of the product, you can view status symbols and simulate d light emitting diode (LED) indicators, display data, or us e mouse functions to mon[...]

Vi ew ing Pr oduct and F a bri c Data 74 Embedded W eb Server Us er Guide T able 5: Status Indicators View LED Nam e Color Beha vi or F r ont S yst em P owe r Gr een Off when the LAN is down . On when t he LAN is up . Sys t e m E r ro r Lig ht ( S E L ) Amber Off when the SEL on t he h a rdw a re i s of f. On when the SE L on the h a rdw a re i s o[...]

Vie wing Product and Fabr ic Data 75 Embedded W eb Server User Guide Viewi n g P or t P rop e r t ie s T o vie w the properties of a port on a product, perform the follo wing procedure: 1. Choose Vi e w from the navig ation panel. 2. Choose the Port Properties tab . The Port Pr operties tab view displays ( Figure 24 ) showing the properties for onl[...]

Vi ew ing Pr oduct and F a bri c Data 76 Embedded W eb Server Us er Guide ■ Ty p e — G_port — Displays if nothing is logged into the port and the port is configured to be a G_Port. — F_Port — Displays if a de vice is logged into the port. — E_Port — Displays if the port is conn ected to another switch’ s E_Port through an ISL. — G[...]

Vie wing Product and Fabr ic Data 77 Embedded W eb Server User Guide ■ Reason — When the port operating state is Segmented E_Port , Invalid Attachment , or Inactiv e , this field displays the reason for that state. When an E_Port is segm ented, two fabrics are pre vented from joining. This only occurs when the sw itch is attempting to connect t[...]

Vi ew ing Pr oduct and F a bri c Data 78 Embedded W eb Server Us er Guide — If Operational State is Inactive : —N o S e r i a l N u m b e r —N o K e y E n a b l e d — Switch Speed Conflict — Optics Speed Conflict (Directo r 2/64 and Director 2/140 on ly) — No SB AR Support (Director 2/64 and Director 2/140 only) ■ Te c h n o l o g y I[...]

Vie wing Product and Fabr ic Data 79 Embedded W eb Server Us er Guide Vie wing FR U Properties T o vie w the properties of an FR U on a pr oduct, perform the follo wing procedure: 1. Choose Vi e w from the navig ation panel. 2. Choose the FRU Pr operties tab. The FR U Properties tab vie w displays ( Figure 25 ) showing each FR U on the product. Fig[...]

Vi ew ing Pr oduct and F a bri c Data 80 Embedded W eb Server Us er Guide Vie wing Unit Pr operties T o vie w the unit properties of a p roduct, perform the following procedure: 1. Choose Vi e w from the navig ation panel. 2. Choose the Unit Properties tab . The Unit Pr operties tab vie w displays ( Figure 26 ) showing product properties. Figur e 2[...]

Vie wing Product and Fabr ic Data 81 Embedded W eb Server User Gui de ■ EC Lev el — Current engineering change (EC) le v el. ■ Firmware Le vel — Release number of the firm w are that is currently installed. Vie wing Operating P arameters for the Product T o vie w the Operating Paramete rs of a product, perform the fo llo wing procedure : 1.[...]

Vi ew ing Pr oduct and F a bri c Data 82 Embedded W eb Server Us er Guide ■ Insistent Domain ID — Indicates whether the domain ID i s enabled to be insistent. This option is required if Enterprise F abric Mode (an optional SANtegrity Binding feature) is enabled. ■ Rerouting Delay — Indicates whether rerouting delay is enabled. Enabling the [...]

Vie wing Product and Fabr ic Data 83 Embedded W eb Ser ve r User Guide Vie wing Operating P arameters for a F abric T o vie w the Operating Paramete rs of a product, perform the fo llo wing procedure : 1. Choose Vi e w from the navig ation panel. 2. Choose the Operating Parameters tab . The Operating Parameters tab view displays ( Figure 27 on page[...]

Vi ew ing Pr oduct and F a bri c Data 84 Embedded W eb Server Us er Guide Figur e 28: Fabr ic tab with Products tab view The Pr oducts page provides a qu ick glance at th e devices in the f abric, as well as direct hyperlink access to f abric particip ants that support the EWS interface. The devices are sho wn in separate product ce ll s or ganized[...]

Vie wing Product and Fabr ic Data 85 Embedded W eb Ser ve r User Guide P ar ts of the Product Cell The product cell has the follo wing parts: ■ A graphic representation of the device and its status. F or more information, see “ Parts of the Product Graphic ” on page 86. ■ Information about the de vice. For more information, see the ne xt se[...]

Vi ew ing Pr oduct and F a bri c Data 86 Embedded W eb Server Us er Guide P ar ts of the Product Graphic The product graphic pro vides the follo wing information: ■ The maximum number of ports on the product. ■ A graphic representing the status of the product. ■ An icon representing the appearance of th e product. Y ou can click the graphic t[...]

Vie wing Product and Fabr ic Data 87 Embedded W eb Server User Gui de T able 7 : Operating S tatus Sy mbols Sym b o l Sym b o l Name Status Mea nin g Gr een Circle F ully Oper ati onal All components and installed ports are oper ati onal; no fa il u res. Ye l l o w Tr i a n g l e Redundan t F ailure A redundan t component ha s fail ed, suc h as a p[...]

Vi ew ing Pr oduct and F a bri c Data 88 Embedded W eb Server Us er Guide Vie wing F abric T opology The topology of a fabric is a high-lev el view of the routing and pathways on the fabric. T o view the f abric topology from the vie wpoint of the hosting machine, perform the following procedure: 1. Choose Vi e w from the navig ation panel. 2. Choo[...]

Vie wing Product and Fabr ic Data 89 Embedded W eb Ser ver Us er Guide 3. The To p o l o g y page provides the informati on sho wn in Ta b l e 8 . T able 8: Compon ents of the T opology P age Pa r t o f Pa g e Component Description Host Infor mation T opology F r om Identif ies the host pr oduct that is pro vi ding the fabri c topolo gy informati o[...]

Vi ew ing Pr oduct and F a bri c Data 90 Embedded W eb Server Us er Guide[...]

91 Embedded W eb Serve r User Guide 5 Mon i t or ing P r o d ucts The Monitor page is used to access informatio n about the product including port and node information as well as critical information about performance. K ey tasks you can perform to troublesho ot problems from the Monitor page are: ■ Monitoring Ports on page 91 ■ Accessing Port [...]

Monito ring Pr oducts 92 Embedded W eb Server Us er Guide ■ Block Conf iguration — Indicates the blocked or unblock ed configuratio n of the port: — Blocked — De vices communicating with the port are prev ented from logging into the product or communica ting with other de vices attached to product ports. — Unblocked — De vices communica[...]

Moni tor in g Pr oduct s 93 Embedded W eb Ser ver Us er Guide Note: Note that if port op tics hav e also failed , the amber LED w ill be on. ■ Invalid Attachment — The switch port is in an in v alid attachment state. ■ Link Incident — A link incident occurred on one of the ports. ■ Link Reset — The switch and the attached de vice are pe[...]

Monito ring Pr oducts 94 Embedded W eb Server Us er Guide Accessing P or t Statistics Choose Monitor on the na vigation panel. Choose th e Port Stats tab; the Por t Stats tab view displays ( Figure 31 ). T o display port statistics for a selected port, enter a port number in the Por t Number field and choose Get Port Statistics . (Y ou can also cho[...]

Moni tor in g Pr oduct s 95 Embedded W eb Server User Gui de P ar ts of Statistics T ables The tables of statistics co ntain the following columns: ■ Statistics — T ype of statistic being tracked. ■ # of Wraps — Number of times the Counter va lue wraps, for statistics that gro w rapidly . The maximum value that either the Counter or the #o [...]

Monito ring Pr oducts 96 Embedded W eb Server Us er Guide For the Edge Switch 2/24, the follo wing statistics are also sho wn: ■ LIPs Detected — A loop initialization primiti ve (LIP) was detected, which means the loop was completed. ■ LIPs Generated — A loop initialization primiti ve w as created to initialize a loop. Class 2 Statistics Th[...]

Moni tor in g Pr oduct s 97 Embedded W eb Server Us er Guide Error Statistics The Error Statistics include these trans mit and recei ve v alues: ■ Link failur es — Number of link failures record ed because a not operational sequence (NOS), protocol t imeout, or port failure w as detected. ■ Sync losses — Number of loss-of-synchroni zations [...]

Monito ring Pr oducts 98 Embedded W eb Server Us er Guide Open T runk ing S tatis tics The Open T runking Statistics includ e these transmit and recei ve v alues: ■ Fl ow s re rou t e d t o IS L — The number of Fibre Channel traff ic flows that were rerouted to this ISL from anothe r ISL due to cong estion. (This v alue increments only if the O[...]

Moni tor in g Pr oduct s 99 Embedded W eb Server User Guide Severi t y L evels Se verity le v els are: ■ Informational ■ Minor ■ Major ■ Se vere (not operational) Err or Ev ent Code Categories Error Event Codes def ine ev ent categorie s; the cate gories and e v ents v ary by product. Belo w is a list of ev ent codes: ■ 1xx-syst em e vent[...]

Monito ring Pr oducts 100 Embedded W eb Server Us er Guide Clearing Ev ent Log Entries Note: Befo re c lear ing the e ven t logs, mak e sure the logs ar e not needed f or tr ouble shooting. Once the e v ent log is clear ed , the data cannot be r etr ie v ed. T o access this option, choose Monitor and choose the Log tab . Choose Clear Event Log Entr[...]

Moni tor in g Pr oduct s 101 Embedded W eb Serve r User Guide Information displayed fo r each node includes: ■ Po rt — Port number . ■ W orld W ide Name — The 16-digit WWN assigned to the attached node. ■ Class of Service (COS) — Class 2 and/or Class 3 service. ■ BB_Credit — Buf fer -to-buf fer credit the attached node has av ailabl[...]

Monito ring Pr oducts 102 Embedded W eb Server User Gui de[...]

103 Embedded W eb Serve r User Guide 6 Operating and Managing Pr oduc ts and P arts Key Ta s k s The Operations page is used to manage the produ ct and ports as well as perform maintenance tasks such as port diagnos tics. Y ou can access information and tools that are usefu l in tr oubleshooting from the Operations page. ■ Setting Product Beaconi[...]

Oper ating and Managing Products and P arts 104 Embedded W eb Server Us er Guide Setting Product B eaconing On or Of f Choose Operations from the na vigation panel. The Switch or Dir ector tab displays, depending on the typ e of product. Choose the Beacon tab; the Beacon tab vie w displays ( Figure 34 ). Using this view , you can enable or disable [...]

Oper ating and Managing Products and P art s 105 Embedded W eb Server User Gui de Setting Product Online or O ffline Choose Operations from the na vigation panel. Ch oose the Switch or Director tab as appropriate. Choose the Online State tab; the Online State tab view displays ( Figure 35 ). A box displays with the current online state and a button[...]

Oper ating and Managing Products and P arts 106 Embedded W eb Server Us er Guide Resetting Product Configur ation t o Default V alues Choose Operations from the na vigation panel. Ch oose the Switch or Director tab as appropriate. Choose the Reset Conf ig tab; the Reset Config tab vie w displays ( Figure 36 ). Y ou can use this vie w to reset prod [...]

Oper ating and Managing Products and P art s 10 7 Embedded W eb Ser ver Us er Guide Note: Befo re r ese tting the pr oduct , y ou may w ant to r e vi ew the kinds o f data that w ill be reset b y bro wsing through the Configure pa ge a nd asso ciated tabs. If the product conf iguration is reset, ma nagement access of the product may be lost until t[...]

Oper ating and Managing Products and P arts 108 Embedded W eb Server Us er Guide A checked box indicates beaconing is ac ti ve, an empty box indicates beaconing is not acti ve for the port. T o change the stat e click once inside the box. (A failed port cannot be set to beacon. ) When finished, click Activate to enable the new confi guration, or Ca[...]

Oper ating and Managing Products and P art s 109 Embedded W eb Server User Gui de Res et ti ng P o r ts Choose Operations from the navigation panel. Choose the Port tab and the Reset tab; the Reset tab view displays ( Figure 38 ). Use this page to reset ports. This action clears all statistics co unters and disables port beaconing for the port. If [...]

Oper ating and Managing Products and P arts 110 Embedded W eb Server Us er Guide P er forming Diagnostics on P or ts Choose Operations from the na vigation panel. Ch oose the Por t tab and the Diagnostics tab; the Diagnos tics tab vie w displays ( Figure 39 ). Use this vie w to run either internal or e xternal loopback diagnostic tests for an y por[...]

Oper ating and Managing Products and P art s 111 Embedded W eb Serve r User Guide Note: T o i dentify port numbers on car ds that y ou w ant to test , dr ag the mou se cur sor acr o ss the car ds in the Unit v iew . A label di splay s with the port number . 1. Enter a port number in the T argeted P ort Number fi e l d. 2. Click the arro w on the Di[...]

Oper ating and Managing Products and P arts 112 Embedded W eb Server Us er Guide 4. T o stop a test, click T erminate Port Diagnostics . Beaconing automatically stops when the test completes or is canc eled. If the port fails the test, the port's amber LED remains on. 5. Results display when the diagnostics finish or when you terminate the tes[...]

Oper ating and Managing Products and P art s 113 Embedded W eb Serve r User Guide Figur e 42: Retrie ving the CTP maintenance information 3. If no dump file is a vailable, the message Not A vailable displays. If a dump file is a v ailable, follo w the instructions sho wn in the tab view . 4. When you have accessed the Sa ve As dialog box ( Figu re [...]

Oper ating and Managing Products and P arts 114 Embedded W eb Server Us er Guide Obtaining Product Information T o obtain product information, ch oose the Operations page, then the Maintenance tab, and then choose Pr oduct Info tab . The Product Inf o tab vie w displays ( Figure 44 ). Figur e 44 : Obtaining product information T o vie w product inf[...]

Oper ating and Managing Products and P art s 115 Embedded W eb Serve r User Guide ■ Zoning Information ■ Port Data ■ Port T echnology ■ Port Login Data ■ E_Port Status ■ Switch Status ■ Switch Configuration Upgrading F irm w are 1. Choose the Maintenance tab from the Operations page, and then choose the Firmwar e Upgrade tab to upload[...]

Oper ating and Managing Products and P arts 116 Embedded W eb Server Us er Guide Note: When adding a firm w are v ersi on, f ollo w all pr ocedural info rmati on contained in the release notes that accompany the firm war e ver sion. That infor mation supplements and super sedes infor mation p ro v ided in this manual . Note: Ref er t o the softwar [...]

117 Embedded W eb Server User Gui de A Err or M essages This appendix lists and explains error messages for the Embedded W eb Server . Any error numbers that are not lis ted are reserv ed for future use. The message that is returned is a string that includes the error number and the text of the message. T able 9: Embedded W eb Serve Messa ges Messa[...]

Err or Mess ages 118 Embedded W eb Server Us er Guide Er ro r 11: Inv ali d S witc h Contact The value en ter ed fo r the sw itc h contact is in va lid . The c onta ct for th e director or switch may contain 0–2 5 5 characte rs. En ter a contac t with 0–2 55 char acter s and r esubmit . If spaces ar e used , encl ose the cont act in quotation m[...]

Err or Messages 119 Embedded W eb Serve r User Guide Er ro r 16: Inv alid R_A_T O V Th e value ent er ed for t he r eso ur ce allocati on time-out value is in v alid . The R_ A _TO V i s ent ered in tenths of a second and mu st be ente red a s an integer in the r ange 10–1200 (1 second to 120 seconds). The R_A_T O V v alue must be larger than the[...]

Err or Mess ages 120 Embedded W eb Server Us er Guide E rro r 2 0 : I nva l i d P re f e rre d Domain ID The v alue ente r ed for th e pr eferr ed domain ID for the director or s witch is inv alid . The pr efer red domain ID mu st be an integ er in the r ange 1–31. Ente r an appropr iate value an d re s u b m i t. Er ro r 21: Inv ali d S witc h P[...]

Err or Messages 121 Embedded W eb Serve r User Guide Er ro r 3 2: In v alid SN MP Comm unity Name The v alue ente r ed for th e SNMP co mmunity name is inv ali d. The community name mu st not e xceed 3 2 char acters in length . Duplicat e communit y names ar e allo w ed, b ut corr esponding w rite authori z ation s must match . Enter an appropr iat[...]

Err or Mess ages 122 Embedded W eb Server User Gui de E rror 39: I nva l id Y ea r The va l u e of t he ye a r entered for the new s ystem d ate is in valid . Th e f or mat o f t he da te par amete r mu st be mm:dd:yyyy o r mm/dd/yy yy . The year must con tain an integer gr eater than 19 80. Enter an app r opriate date and re s u b m i t. Er ro r 4[...]

Err or Messages 12 3 Embedded W eb Serve r User Guide Er ro r 5 5: Inv alid Z one Name Th e value ent er ed for t he z one name is inv alid . T he z one name mu st be unique and contain 1–64 cha racters. Err or 5 7 : Duplicate Zone T wo or mor e zone names in the z one set are ident ica l. All z one names m ust be uniqu e. Mak e the appropr iate [...]

Err or Mess ages 12 4 Embedded W eb Server User Gui de Er ro r 7 2: No Bac ku p FRU The FRU canno t be sw ap ped becau se a bac ku p FRU is no t installed. Insert a ba ck up FRU and re s u b m i t t h e re qu es t or consult the installati on or service manual f or this product for appropri ate action . Er ro r 7 3: P ort Not Installed The port spe[...]

Err or Messages 125 Embedd ed W eb Server User Guide Er ror 7 9: FRU F ailed The spec ifi ed FRU has fa il e d. Consult the installation/servi ce manua l for appropr iate action . Er ro r 81: Defa ult Zone Enabl ed The requ est c an no t b e completed be cause the def ault z one is ena bled Disable the de fault z one and r esubmit the command. Er r[...]

Err or Mess ages 12 6 Embedded W eb Server User Gui de Er ro r 91: E_P ort T ype Con figured P orts ar e not allo w ed to be conf igur ed as E_P orts in S/39 0 mode (FICON management style in HAFM). Conf igur e the po rt as either an fport or gport and r esubmit the command. Er ro r 92 : Not Allo w ed While P ort Is Un blocked The port must be bloc[...]

Err or Messages 12 7 Embedded W eb Server User Guide Er ro r 117 : P ort Speeds Cannot be Set at Higher Data Rate than Sw itch Speed Thi s requ es t c an no t b e completed be cause the r eques ted port s peed is faste r tha n the curren t ly-c o nfi gu red sw itc h speed. The s w itch speed shoul d fi rs t b e c o n fi g u re d to accommodate chan[...]

Err or Mess ages 128 Embedded W eb Server User Gui de Er ro r 136: In v alid Number of S wit ch Memb er shi p L ist En tr ie s The nu mb er of switc h member s subm itted ex ceeds the maxim um allo w able entr ie s of 25 6 . The num ber of entries in the s wit ch membe rship list is limited to 2 56 . Make sure that the li st (includ ing the managed[...]

Err or Messages 129 Embedded W eb Serve r User Guide Er ro r 143: Domain RSCN s Mu st B e E n ab le d When E nterpr ise Fabr ic Mode Ac ti v e The use r attempted to disable domain RS CN's while en ter pr ise fabr i c mode wa s activ e . Domain R SCN 's mus t r emain enabl ed while the enterpr ise fabr ic mo de i s acti ve . If enter pr i[...]

Err or Mess ages 130 Embedded W eb Server Us er Guide Er ro r 15 2 : In vali d FICON Mana ge men t Se rve r S ta te Th e reque st c an not b e completed be cause the FICON MS s tate submitted is in vali d . The FICON MS state ma y be set to eit her enab le or disabl e. Er ro r 153: F eatur e K e y Not Inst alled The reque st c an no t b e completed[...]

Err or Messages 131 Embedded W eb Server User Guide Er ro r 201: Change Authori zation Request Fa i l e d Th e sw it ch di d not accep t the request to mak e a chan ge to N VR A M. Be sur e all parame ter s hav e been ent er ed cor r ectly an d re submit . Contact your ser vice r epresent ativ e with further pr oblems. Error 202: I nval id Chan ge [...]

Err or Mess ages 13 2 Embedded W eb Server User Gui de Er ro r 211: Duplicate Zo ne T wo or mor e z one names in the loca l z one set are ident ica l. All z one names m ust be uniqu e. Mak e the appropr iate changes and re s u b m i t. Er ror 212 : Duplicate Z one Memb er A member w as added that alread y ex ists in the zo n e . No action necessary[...]

Err or Messages 13 3 Embedded W eb Server User Gui de Er ro r 219: In v alid P ort Ty p e Th e port ty pe conf ig ur ed is inv ali d. A po rt ma y be confi gur ed to be an eport , gport , or fport . Be sur e the port is con figur ed appropr iately and r esubmit the command. On the Edge S wit ch 2/2 4 only , fxport and gxport ty pes ar e also suppor[...]

Err or Mess ages 134 Embedded W eb Server User Gui de E rror 228: I nva l id W ri te Auth oriz atio n Arg um ent T he wr ite au thor iz at ion par amete r does no t cont ain a vali d v alue. P arame ter s mu st be typed ex actl y to spec ificati on to b e rec o g n ize d c o rre ct ly. E rror 229: I nval id U D P Po r t N u m b e r The ud pP or tN [...]

Err or Messages 13 5 Embedded W eb Server User Gui de E rro r 23 5 : U n re c o g n ize d Comm and Cannot r ecogniz e the command and c annot perf or m the help '?' command as requested . Th e ent er ed comman d is misspel led, or the prompt is not positi oned at the ri ght place . F or the appropr iate sy ntax, see the section of the man[...]

Err or Mess ages 136 Embedded W eb Server User Gui de Er ro r 2 41: Comma-delimited mode must b e act ive Comma-delimited mode mu st be activ e to e xec ute this command Some co mmand s requir e that comma-delimited mode be activ e (for exa mp le, show .nameser verExt) . Enable comma-delimited mode and re-issue the command. Er ro r 2 4 2: Ope n tru[...]

Err or Messages 13 7 Embedded W eb Server User Gui de E rror 249: At l e as t o ne port or po rt type mu st be added to this thr eshold alert A port or po rt type mu st be assi gned to an aler t bef or e it is enab led. Use the perf.counterThresh Alerts.addPor t command to add a port bef or e the ale rt is enabled. Er r or 25 0: Inv ali d count er [...]

Err or Mess ages 138 Embedded W eb Server User Gui de[...]

139 Embedded W eb Server User Gui de index Index Index 10-100 km column 28 A activating beaconing 107 zone sets 69 active domain ID 81 active zone set, description 63 address resolution protocol table 39 address, Fibre Channel 101 administrator rig hts 46 administrator-level ID 44 alert symbols 73 ARP table 39 attached port WWN 76 authorization tra[...]

Inde x 140 Embedded W eb Server Us er Guide counter 95 CTP dump file 112 D data field size 101 date fields 31 Date/Time tab view 31 deactivating beaconing 107 zone sets 69 default IP address 23 user name 18 , 24 , 39 values 26 resetting 106 zone concepts 62 disable 70 enable 70 definition Embedded Web Server interface terms 19 product cell 84 wraps[...]

Inde x Embedded W eb Serve r User Guide 141 error log, clearing 100 event codes 99 event log , clearing 100 external loopback test 110 F F_Port 28 Fabric Parameters tab view 35 fabrics address notification featu re 27 configuring parameters 35 controlling access 55 creating 63 definition 21 merging 64 operating parameters 83 topology, viewing 88 vi[...]

Inde x 14 2 Embedded W eb Server User Gui de I Identification tab view 29 identification, product 29 indicator lights 73 information, product 114 insistent domain ID 33 , 82 installing feature keys 52 Flexport 52 OpenTrunking feature 52 OSMS 52 SANtegrity 52 installing feature keys 52 internal loopback test 110 interop mode 36 , 60 , 83 introductio[...]

Inde x Embedded W eb Serve r User Guide 143 open system interconnectio n standards. See OSI standards OpenTrunking feature, installing 52 operating mode 82 parameters 81 fabric 83 speed 76 state reason 77 Operating Parameters tab view 81 , 83 operational st ates 76 port 92 Operations page 103 operator rights 46 operator-level ID 44 OSI standards 58[...]

Inde x 144 Embedded W eb Server Us er Guide monitoring 91 name 30 , 73 , 80 operating mode 82 serial number 80 setting offline 105 online 105 state 72 status 72 type number 80 view 72 WWN 80 Product Info tab view 114 Product Manager 17 Products tab view 83 properties FRU 79 unit 80 R R_A_TOV 35 , 36 , 83 rack stability, warning 13 RAID 59 rear view[...]

Inde x Embedded W eb Serve r User Guide 145 suppress zoning RSCN 34 switch priority 36 , 83 symbol operating status 87 symbols in text 12 symbols on equipment 12 system error light, clearing 100 T tab view, defined 20 tab, defined 20 technical support, HP 14 technology port properties 78 terminology Embedded Web Server 19 key 21 navigation panel 19[...]

Inde x 146 Embedded W eb Server Us er Guide Z zone definition 22 overview 60 zone members definition 22 interoperability mode 60 maximum number 60 port numbers 61 types 60 WWNs 60 Zone Set tab view 69 zone sets activating 69 active 63 configuring 69 deactivating 69 default zone 70 definition 22 description 62 disable 70 naming conventions 60 renami[...]