HP (Hewlett-Packard) Workstation manual
- Consulta online o descarga el manual de instrucciones
- 230 páginas
- 4.15 mb
Ir a la página of
manuales de instrucciones parecidos
-
Computer Hardware
HP (Hewlett-Packard) FX 3700
3 páginas 0.06 mb -
Computer Hardware
HP (Hewlett-Packard) 69731B
22 páginas 0.93 mb -
Computer Hardware
HP (Hewlett-Packard) A5992-90100
215 páginas 1.66 mb -
Computer Hardware
HP (Hewlett-Packard) ML330
44 páginas 1.35 mb -
Computer Hardware
HP (Hewlett-Packard) DL160
39 páginas 0.78 mb -
Computer Hardware
HP (Hewlett-Packard) ML110
27 páginas 0.61 mb -
Computer Hardware
HP (Hewlett-Packard) FSPCI64S
20 páginas 0.09 mb -
Computer Hardware
HP (Hewlett-Packard) Computer Parts
21 páginas 0.59 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones HP (Hewlett-Packard) Workstation. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica HP (Hewlett-Packard) Workstation o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual HP (Hewlett-Packard) Workstation se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales HP (Hewlett-Packard) Workstation, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones HP (Hewlett-Packard) Workstation debe contener:
- información acerca de las especificaciones técnicas del dispositivo HP (Hewlett-Packard) Workstation
- nombre de fabricante y año de fabricación del dispositivo HP (Hewlett-Packard) Workstation
- condiciones de uso, configuración y mantenimiento del dispositivo HP (Hewlett-Packard) Workstation
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de HP (Hewlett-Packard) Workstation no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de HP (Hewlett-Packard) Workstation y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico HP (Hewlett-Packard) en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de HP (Hewlett-Packard) Workstation, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo HP (Hewlett-Packard) Workstation, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual HP (Hewlett-Packard) Workstation. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
HP xw9 3 00 W o r kst ati on Se r v i ce and T ec hni cal R e f er e nce Gui de F irst Ed ition: 02/200 5 Seco nd Edit ion: 04/ 2005[...]
-
Página 2
Copyri ght Info rmat ion © 2005 C opy right He wlett-P ac kar d Dev elopment Co mpany , L.P . F irst Ed ition: F ebruary 2005 Second Editi on: April 2005 Warranty Hew lett-Pa ck ard Compan y shall not be lia ble for techni cal or editori al err ors or omissio ns contained here in or for inc idental o r cons equential damages in connection w ith th[...]
-
Página 3
Contents Conte nts 3 Preface Important Safety Warning s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Updating BIOS, Drivers, and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Finding Information . . . . . . . . . . . .[...]
-
Página 4
4C o n t e n t s 3 System Management Computer Setup (F1 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 BIOS ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using Computer Setup (F10 [...]
-
Página 5
Contents Conte nts 5 Security Lock (O ptional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Cable Lock (Optio nal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Universal Chassis Clamp Loc k . . . . . . . . . [...]
-
Página 6
6C o n t e n t s Solving Display Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Solving Audio Pro blems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Solving Printer Pro blems . . . . . . . . . . . . . . . . [...]
-
Página 7
Contents Conte nts 7 G Additional Password Secu rity and Resetting CMOS Resetting the Passw ord Jumper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Clearing and Resetting the CMOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 U[...]
-
Página 8
8C o n t e n t s[...]
-
Página 9
Pr eface 9 Pr e f ace This pr ef ace contains the follo wing inf ormati on. • “Important Safety W arnings ” on page 10 • “Updating BIO S, Dr iv ers , and Softwar e ” on page 13 • “F inding Infor mation ” on page 14[...]
-
Página 10
10 Important Saf ety W a r nings WA R N I N G ! A v oiding Electr ical Shoc ks. T o avo id electr ical shoc k, do not open the po wer su pply . The re are no user -servi ceable par ts inside . T o a vo id electr ical shock and har m to your e y es b y laser light , do not open the DVD la ser module . The laser module should be se r v iced b y servi[...]
-
Página 11
Important Safety Warnings Pr eface 11 WA R N I N G ! Avoi di n g Metalli c P artic ulates . The y can be espec ially har mful ar ound electr onic equipment . This type o f contamination may enter the data center en v ironment f r om a var iety of sour ces, inc luding, but not lim ited to, r aised floo r tiles, w orn a ir conditio ning par ts , heat[...]
-
Página 12
12 NO TE: Recycl in g Y o ur S yste m. HP has a str ong commitment to war d the env ir onment . Y our HP s ys tem has been designed to r espect the en vir onment as muc h as possible . HP can also take back y our old s ys tem for rec yc ling when it r eaches the end o f its useful lif e . HP has a pr oduct tak e -back pr ogr am in sev eral countr i[...]
-
Página 13
Updating BIOS, Drivers, and Software Pr eface 13 Updating BIO S , Dr i v er s , and So ft w a r e HP continuall y str iv es to implemen t new enhancements that w ill inc reas e functi onality , performance , and rel iabi l it y o f you r H P W o rkst at ion. T o e ns ure th at yo ur sy s tem ta kes a dvan ta ge of t he lat es t en ha nc em en ts, H[...]
-
Página 14
14 Fi n d i n g I n f o r m a t i o n E- S u p p o r t F or online access t o techni cal support informati on and tools, go to http ://www .hp .com/ su pport . Su pport re sour ces include W eb-based trouble shooting tools, tec hnical kno wledge databas es, dr iv er and patch dow nloads, online communiti es, and pr oacti ve notif ication services .[...]
-
Página 15
Finding Information Pr eface 15 Usi ng the Doc u ment ation L ibr ar y and Di agnosti cs CD T o acces s the contents of the Doc umentation L ibr ary and Di agnostic s CD, f ollow the steps that ar e applicable t o your w orks tation . Window s -Ba sed W ork station s Insert the CD into the CD-ROM dr iv e . The CD Aut orun featur e begins. If ther e[...]
-
Página 16
16[...]
-
Página 17
Pr oduct Overv ie w 17 1P r o d u c t O v e r v i e w This c hapter pre sents an ov ervi ew of the har dw ar e components of the HP xw9 300 W orkstati on. • “Pr oduct F eatures ” on page 18 • “Pr oduct Spec ifi cations ” on page 2 2 • “P ow er Suppl y and Cooling” on page 2 3 • “Env ir onmental Spec if ication ” on page 30 ?[...]
-
Página 18
Product Overview 18 Pr oduct F eatur e s This s ection cont ains the follo w ing infor mation: • “Exploded Vi ew ” on page 18 • “Rear P anel Components ” on page 20 • “Ser ial Number and C O A Label L ocation ” on page 21 Exploded V i e w The f ollow ing image sho ws a typi cal HP xw9 300 W or kstation (dr i ve conf igur ations ca[...]
-
Página 19
Product Features Pr oduct Overv ie w 19 F r ont P a nel C omponents The f ollo wing image sho ws a typ ical HP xw9 300 W orkstation . Dr iv e confi gurati ons can vary . Ta b l e 1 -2 Fron t P a ne l Vi ew 1 Optical Dr iv e E ject Bu tton 5 Uni versal S erial B us (USB) (x2) 9 5 .2 5-Inch Dr iv e Bays (x2)** 2 Po we r O n L i g h t 6 Headphone Conn[...]
-
Página 20
Product Overview 20 Re a r P a n e l Co m p o n e nt s Ta b l e 1 - 3 Rea r P a nel Com po nen ts 1 Univ ersal Chassis Clamp Opening 9 Graphi cs Adapter 2 Access P anel K ey s : Mic roph one Connecto r (pink) 3 P adloc k Loop ; IEEE 13 9 4 Connector 4 Cable Lock Slot < USB (x4 ) 5 P S/2 Mouse Connector (gr een) = P S/2 K ey board C onnector (pur[...]
-
Página 21
Product Features Pr oduct Overv ie w 21 Ser ial Number and C O A La bel L ocation E ach HP W orkstati on has two unique ser ial n umber labels. T he ser ial number labels ar e located on the side panel 1 of the unit and on the rear panel 3 . Y ou n eed th is numb er when co ntacting customer servi ce for assis tance. S ystems pr eins talled with W [...]
-
Página 22
Product Overview 22 Pr oduct S pec if i cations The f ollow ing table lists the phy sical dime nsions of the HP xw9 300 W orkstati on. Ta b l e 1 - 4 Ph ysi cal Char acter istic s We i g h t (dependent on confi guratio n) 19–2 4k g (4 2–54 lb) T o wer Dime nsions 4 5 5mm (17 .9 inches) tall 210mm (8.3 inc hes) wi de 5 25mm ( 20.7 inches) deep R[...]
-
Página 23
Power Supp ly and Cooling Pr oduct Overv ie w 23 P o w er Suppl y and C ooling This s ection cont ains the follo w ing infor mation: • “P ow er Suppl y Specif icati ons ” on page 2 6 • “P ow er Consumpti on and Cooling ” on page 2 7 • “S y stem F ans and A irflo w” on page 2 8 • “Res etting the P ow er Supply ” on page 2 9[...]
-
Página 24
Product Overview 24 P o w er Outpu t and Cooling The HP xw9 300 W orkstati on pow er suppl y contains 9 outputs: • +3 .3 V —used w ith P CI, P CI-X, P CI-E , NVIDIA nF or ce Pr ofes sional 2000 ser ies MCP s, AMD8131, LS10 30, IEEE 13 9 4, A udio , Super I/O , on-board logic • +5V —used w ith stor age (disk, opti cal , diskette), PCI , PCI-[...]
-
Página 25
Power Supp ly and Cooling Pr oduct Overv ie w 25 WA R N I N G ! Do not e x ceed 136W of a 5V and 3 . 3V po wer co mbination . WA R N I N G ! Do no t ex ceed 5 5A (6 60W) of 12V (CP U0/CPU1/A/B/C) po w er combinati on. WA R N I N G ! Do not e x ceed 70 0 W of total continuous output po wer . 12V-C 0A 0A 12 .5A 14.0A V12N 0A 0A 0.5A 0.8A 5VSB 0A 0A 2[...]
-
Página 26
Product Overview 26 P o w er Su ppl y Spec ifi cati ons The f ollow ing table lists the po wer suppl y specif icati ons. Ta b l e 1 -7 P o wer Suppl y Spec ifi cations F ull Ranging Input (No L ine Select S w itch) Y es Acti ve P o wer F actor C orr ectio n (APFC) (Input C urre nt is nearl y half of that of a non- APFC PS) Ye s Pa s s i v e Po w e [...]
-
Página 27
Power Supp ly and Cooling Pr oduct Overv ie w 27 P o w er Consum pti on and C ooling The f ollow ing table sho ws the po w er consumption f or a typical conf igur ation (based on pr imary pow er consumptions): • T wo processo rs (2 .4 GHz O pteron) • 2GB memory ( 4x512MB) • Tw o h a r d d r i v e s ( 2 x S ATA 4 0 G B ) • DVD- ROM dr i ve ?[...]
-
Página 28
Product Overview 28 S y s tem F ans and A irflo w The w orkstati on includes one r ear sy stem fan , one CPU heatsink for eac h process or (CPU), one pow er suppl y fan, plu s a fr ont sy stem f an if t w o CP Us are in s talled. F or airflo w , this s y stem includes a memory airflo w duct and a CPU airf low duc t, w hic h is re quir ed if t w o C[...]
-
Página 29
Power Supp ly and Cooling Pr oduct Overv ie w 29 R es etting the P o w er Su ppl y If an ov erload tr iggers the po w er supply o v erload pr otecti on, all po wer is immediat ely c ut . T o r eset the po wer suppl y unit: 1. Disconnec t the po we r cord . 2. Determine w hat caus ed the ov erload and f ix the pr oblem . 3. Reconnect the po w er cor[...]
-
Página 30
Product Overview 30 En v ir onmental S pec if i cati on The f ollo wing ta ble desc ribe s env ir onmental spec if ications f or the HP xw9 300 W orkst ation . Ta b l e 1 - 9 Env ir onmental Spec ifi cations Te m p e ra t u re Operat ing: 5° to 3 5° C ( 40° to 9 5° F ) Non -operating: -40° to 60° C (-40° to 1 40° F) NO TE: Derate by one deg[...]
-
Página 31
PCI and PCI Expr ess Slot Power Specific ations Pr oduct Overv ie w 31 P CI and P CI Expr e ss Slot P o w er S pec if i cati ons The f ollow ing table des cr ibes the slots, car d t y pes, and max imum slot pow er . NO TE: If a gr aphic s card r equiring mor e than 7 5W is installed , HP recommends not using the slot immediatel y belo w the graphi [...]
-
Página 32
Product Overview 32 ENER G Y S T AR The ENERG Y S T AR® pr ogr am, a gov ernment-back ed initiativ e , promote s energ y effi ci ency by i dentif y ing wa ys to reduce ener g y consumption . Select HP wo rkstati ons partic ipate in the ENERG Y S T AR pr ogr am. NO TE: ENER G Y S T AR is not supported on L inux -based w or kstations . F or those w [...]
-
Página 33
Installing or R estor ing the Operating S ystem 33 2 Installing or R est or ing the Oper ating Sy s t e m This c hapter desc ribe s the installation and r estor ation o f the operating s ys tem. • “Installing the Oper ating Sy stem and S oftwar e” on page 3 4 • “Res tor ing the Oper ating Sy ste m” on page 3 9 • “ Pro te ct i n g t [...]
-
Página 34
Installing or Restoring the Operating System 34 Inst alling the Oper ating S y s tem and S oft w ar e The following sect ion discusses the operating s ystem an d HP sof tware install ation p r oced ures . • “Mic r osoft W indow s XP Pro fessional” on page 3 4 • “L inux -Pr einstalled W orkst ations ” on page 3 5 • “L inux -Enabled W[...]
-
Página 35
Installing or R estor ing the Operating S ystem Installing t he Operating Sys tem and Software 35 L in u x -Pr e inst alled W or kstati ons If y ou hav e a Lin ux -pr einstalled HP W orkstati on, f ollo w the instruc tions in this secti on to set u p your O S and softwar e. After the boot pr ocess complet es, y ou can vi ew additi onal HP Linu x do[...]
-
Página 36
Installing or Restoring the Operating System 36 2. Cop y the ISO image to CD-R boota ble media. On ano ther Linu x wo rkstati on, us e the cdrecor d utility . Identify the d e v ice addre ss fo r the CD burner ( cdrecord --scanbus ). The def ault is usually 2 , 0, 0. Example: cdrecord -v -eject dev=2,0,0 CD0_golden.iso Installing w ith the HP Dr iv[...]
-
Página 37
Installing or R estor ing the Operating S ystem Installing t he Operating Sys tem and Software 37 L in u x -Enabled W or kst ations Li nux -enabled HP W orkstati ons r equire the HP Inst aller Kit f or Linu x and the pur chas e of a Red Hat box set . The Inst aller Kit inc ludes the HP CDs necessary to complete the inst allation of all v ersi ons o[...]
-
Página 38
Installing or Restoring the Operating System 38 HP Sof tware The f ollow ing HP softwar e is installed the f irst time the HP W orkstati on is turned on: • Computer S etup (F10) Utilities and di agnostic featur es • HP Support Softw are inc luding dev ice dr i ver s • HP Client M anager Soft war e (available for download from http://www .hp .[...]
-
Página 39
Installing or R estor ing the Operating S ystem Restoring the Operating System 39 R es tor ing the Oper ating S y st em T o r estor e the ori ginal Windo ws oper ating s ystem and f actory-installed softwar e , insert the Re st ore Pl us ! CD that came with y our HP W orkstation . Car efull y re ad and follo w the instructio ns pro vi ded with the [...]
-
Página 40
Installing or Restoring the Operating System 40 Pr otecting the So ft w ar e T o pr otect so ftware f ro m loss or damage, k eep a back up copy o f all sy stem softw are , applicati ons, and re lated files s tored on the har d dri v e. See the oper ating s ystem or bac k up utility documentati on for instru ctions on making bac k up copies o f data[...]
-
Página 41
Installing or R estor ing the Operating S ystem Ordering Backup Software 41 Or der ing Bac k up So ft w ar e All softwar e that shipped w ith the wor kstation , including the Resto re Plus ! CD, can be or der ed fr om HP as a single set , or you can or der the var iou s softwar e pack ages separ ately . NO TE: Bef or e calling HP to or der the s of[...]
-
Página 42
Installing or Restoring the Operating System 42[...]
-
Página 43
Sys t em M a n a g em e n t 43 3 S y stem Man agement This sec tion des cri bes the var ious tool s and utilities that allo w fo r the sy stem management o f the work sta tion. • “Computer Setup (F10)” on page 44 • “Desktop Management” on page 5 4[...]
-
Página 44
System Management 44 C omput er Setup (F10) This s ection con tains the foll ow ing infor mation t o help y ou use C omputer Se tup . • “BIOS R OM” on page 4 5 • “Using Co mputer Setup (F10)” on page 46 • “Computer Setup Menu ” on page 4 7 The Computer Setup (F10) utilities enable y ou to: • Change c urr ent settings fr om the f[...]
-
Página 45
Sys t em M a n a g em e n t Computer Setup (F10) 45 • Exec ute self-tests on spec ifi ed S A T A har d dri ves ( when supported by the dr i ve). BIO S R OM The Basi c Input/Output S y stem (BIO S) of the comput er is a colle c tion of machine languag e pr ograms stor ed as firm war e in r ead-only memory (R OM) . T he BIOS RO M includes suc h fun[...]
-
Página 46
System Management 46 Using C ompu ter Se tup (F10) Y ou can only open C omputer Setup b y turning on the wor kstati on or res tarting the sy stem. T o access the Comp uter Se tup U tilit ies me nu: 1. T ur n on or rest art the w orkst ation. 2. Pr ess the F1 0 ke y as soon as the monitor light turns green . NO TE: f y ou do not pr ess the F1 0 ke y[...]
-
Página 47
Sys t em M a n a g em e n t Computer Setup (F10) 47 Computer Setup M enu NO TE: T he follo wing conte nt is subject to change w ith new f irm war e releases , so yo ur menu might be than the follo wing table . Ta b l e 3 - 1 1 Comput er Setup Menu Descr iptions Heading Option Description Fi l e Sys te m Info rmation Lists pr oduct name , pr ocessor[...]
-
Página 48
System Management 48 Storag e Device Con figurati on Lists all installed non-SC SI storage dev ices. SC SI storage dri ves w ill not be li st ed in Computer Setup (F 10). S A T A stor age dri ves w ill not be listed in this menu . When a dev ice is selected , detailed informati on and options are displa yed . The follo w ing options migh t be pres [...]
-
Página 49
Sys t em M a n a g em e n t Computer Setup (F10) 49 Sto r a ge Options Remo va ble Media Boot Enables/disables ability to boot the s yst em fr om remo vable media . Remo v al Media Disk ette W rite Enables/disables ab ility to write dat a to remo vable medi a. BIO S IDE DMA T ransf ers Enable/disables the BIO S use o f DMA for tr ansfer s. Primary [...]
-
Página 50
System Management 50 Security Setup Pa s s wo r d Allo ws y ou to set and enable setup (adminis trator ) pass wor d . NO TE: If the setup passw ord is set , it is requ ired to change Computer Setup options, flash the RO M, and make c hanges to certain PnP settings under Windo ws. Po w e r - O n Pa s s wo r d Allo ws y ou to set and enable po wer -o[...]
-
Página 51
Sys t em M a n a g em e n t Computer Setup (F10) 51 Advanc ed ** Boot Allow s y ou to set: • PO S T Mode (QuickBoot , F ullBoot , or FullBoot e ve r y 1–3 0 day s) . • PO S T Message s (enable/disa ble) . • F9 Pr ompt (enable/disable). Enabling this feature w ill display the te xt F9=Boot Menu duri ng PO S T . Disabling this fe ature pr e v[...]
-
Página 52
System Management 52 Pr ocessors Enable/disable Pr ocess or Cache and C ohere nt HT Speed*. NO TE: Y ou can set the H yper T ransport Speed be tween the CPUs to one of the follo wing v alues: 200, 400, 600, 1000, and Auto . *This opti on is only av ailable on sy stems w ith two pr ocessor s. Chipset/ Memory Enable/disable EC C suppor t , Memory s c[...]
-
Página 53
Sys t em M a n a g em e n t Computer Setup (F10) 53 Slot 6 (PCI-X 13 3) Conf igur es the option R OM, latency time r , and PCI x4 functi on chec k**. *A vailable o n select m odels. **Thes e options should be used b y advanced u sers only . Ta b l e 3 - 1 1 Compu ter Setup Menu Desc ripti ons (continued) Heading Option Description[...]
-
Página 54
System Management 54 Desk top Manage ment HP Client Management Solutions (av ailable for dow nload fr om http://www .hp.com/go/ea sy deplo y ) pr ov ides standar ds-based s olutions fo r managing and controlling w orkst ations in a networ ked env ir onment. T his section summar i z es the capabilities and featur es of the k ey components of de skto[...]
-
Página 55
Sys t em M a n a g em e n t Desktop Management 55 Initi al Co nf igur ation and Deplo y ment The w orkst ation comes w ith a pre installed s ys tem softwar e image . After a bri ef softwar e “ unbundling ” pr ocess, the w orks tation is r eady to us e. Y ou migh t pre fer t o replace the pre install ed softwar e image with a c us tomi z ed set [...]
-
Página 56
System Management 56 R em ote S y stem Insta llat ion Remot e Sy stem Installati on lets yo u start and set up yo ur sy ste m using the s oftwar e and conf igur ati on infor mation located on a networ k server . This f eature is u sually used as a s ys tem setup and confi gurati on tool, and can be u sed for the f ollo w ing tasks: • Deploy ing a[...]
-
Página 57
Sys t em M a n a g em e n t Desktop Management 57 So ft w ar e Updating and Management HP pr ov ides s ev era l tools for managing and updating so ft w ar e on desktops and w orkstati ons—HP Clie nt Manager Softw are , Altir is Cli ent Management Solu tions, S ystem So ftwar e Manager , Proac tiv e Change Notifi cation, and Sub scr iber’s Cho i[...]
-
Página 58
System Management 58 F or more inf ormati on and details on how to do wnl oad a fully-f unctional 3 0 -day ev aluation v ersio n of the Altir is soluti ons, v isit http://h18000.www1.hp .com /im/pr odinfo .html#deplo y . Fo r m o re i n fo rm a ti on , vi s i t http: //www .hp . com/ go/ea s y dis pla y . Sys t e m S o f t w a re M a n a g e r S ys[...]
-
Página 59
Sys t em M a n a g em e n t Desktop Management 59 ROM Fla s h The w orkst ation comes w ith a pr ogramma ble flash r ead-only memory (ROM). By e stablishing a setup pass wor d in the Computer Setup (F10) Utility , yo u can pr otect the ROM fr om being unintenti onally updated or o verwr itten. T his is impor tant t o ensure the oper ating integrity[...]
-
Página 60
System Management 60 NO TE: Some mode ls also support r ecov ery from a R OMP aq CD. IS O R OMP aq ima ge s are inc luded with select ed models in the dow nloadable ROM s oftpaqs. When the boot block detec ts an inv alid sy stem R OM, the po w er LED blinks RED ei ght times, one e very second, f ollow ed by a 2 -second pause. Also, e ight simultane[...]
-
Página 61
Sys t em M a n a g em e n t Desktop Management 61 R eplicating the S etup The f ollow ing pr ocedur es giv e an administrat or the ability to easily cop y one setup conf igur ation to other wor kstations of the same model . This allo ws for f aster , mor e consistent configur ation of multiple work sta tion s. NO TE: Both pr ocedur es r equire a di[...]
-
Página 62
System Management 62 NO TE: A boota ble diskette is r equir ed for this pr ocedur e . If Windo ws XP is not av ailable to create a bootable disk ette, us e the method for cop ying to a single w orkstati on instead (s ee “Copy ing to a Single W or kstation ” on page 61 ). 1. Cr eate a bootable disk et te . 2. Selec t a setup co nfi gur ation to [...]
-
Página 63
Sys t em M a n a g em e n t Desktop Management 63 W orld W ide W eb Site HP engineers r igor ousl y test and debug softwar e dev eloped b y HP and third-party supplie rs, and de v elop oper ating sy stem spec if ic support softwar e , to ensure perf ormance , compatibility , and reli ability for HP work sta tion s. When making the tr ansition to ne[...]
-
Página 64
System Management 64 Ass et T r acking and S ec ur ity Asset tr acking f eature s incorpor ated into the wor kstati on pro vi de ke y ass et trac king data that can be managed using HP S y stems Insight Manager , HP Clie nt Manager Soft w are , or other s ystem management applicati ons. Seamle ss, automati c integrati on between ass et trac king fe[...]
-
Página 65
Sys t em M a n a g em e n t Desktop Management 65 P a s sword S e cu ri t y The po wer -on pass wor d pre vents unautho ri z ed use of the wor kstation b y req uiring entry of a passw or d to access applicati ons or data each time the w orkst ation is turned on or r estarted . The setu p passw or d spec ificall y pr ev ents unauthor iz ed access to[...]
-
Página 66
System Management 66 NO TE: If y ou do not pres s the F1 0 k ey at the appr opri ate time , you mus t re start the works tation and pr ess and hold the F1 0 ke y again to access the utility . If yo u ar e using a P S/2 ke y boar d, y ou might s ee a K e yboar d Err or mes sage—disr egar d it . 3. Select Security > Set up P ass w ord and f ollo[...]
-
Página 67
Sys t em M a n a g em e n t Desktop Management 67 E nt eri n g a S et up P as sword If a setup pass w ord has been est ablished on the wor kstation , you w ill be pr ompted to enter it eac h time you r un Computer Setup . T o enter a se tup passw or d: 1. T ur n on or rest art the w orkst ation. 2. As soon as the w orkst ation is tur ned on, pr ess[...]
-
Página 68
System Management 68 NO TE: See the “National K ey board Delimite r Char acters ” on page 68 f or info rmation about the alternate delimit er char acters . The po w er- on pass wor d and setup pa ssw or d can also be c hanged using the Secur it y options in Computer Set up . Deleting a P o w er - On or Setu p P ass w or d T o delete a po w er-o[...]
-
Página 69
Sys t em M a n a g em e n t Desktop Management 69 Clearing P ass wor ds If yo u for get y our pass wor d, y ou cannot acces s the works tation . Ref er to “ Additional P assw or d Secur ity and Res etting CMOS” on page 20 3 for instr uctio ns on clear ing pass wor ds. Hoo d Sensor (Sm art Co v er Sen sor ) The hood sens or is a combination of h[...]
-
Página 70
System Management 70 4. Bef or e ex iting , cl ic k File > Sav e C hang es and Exit . Ca ble L ock Pr ov ision (Opti onal) The r ear panel of the chas sis can accommodate a cable lock acces sory that allows the works tation to be phy si cally sec ur ed to a w ork ar ea. Sec urit y L ock (Opt ional) Pr ev ents entir e s ys tem theft and discour a[...]
-
Página 71
Sys t em M a n a g em e n t Desktop Management 71 F ault Notif i cation and R e co v er y F ault Notifi cation and Reco very featur es combine innov ati ve har dw are and softwar e technolog y to pre v ent the loss o f cr itical data and minimi z e unplanned do w ntime . If the w orkstati on is connected to a networ k managed by HP Cli ent Manager [...]
-
Página 72
System Management 72[...]
-
Página 73
Remo val and R eplac ement Pr ocedur es 73 4 R emo v al and R eplacement Pr ocedur es This c hapter desc ribes r emo val and r eplacement pr ocedure s of most inter nal components. • “Servi ce Consider ations ” on page 7 4 • “Pre-Disassembly Pr ocedure s ” on page 7 9 • “S y stem Boar d” on page 8 0 • “Remo val and Replacement[...]
-
Página 74
Removal and Replacement Procedures 74 Se r vice Con s ide r a t ion s The f ollow ing secti ons discu ss servi ce consider ations that should be r ev ie wed and pr acticed bef or e re mov ing and r eplacing an y s ys tem components . WA R N I N G ! When lifting or mo v ing the workstati on, do not use the fr ont bez el as a handle or lifting point [...]
-
Página 75
Remo val and R eplac ement Pr ocedur es Service Considerations 75 Electr os tati c Disc har ge Inf ormati on A sudden disc harge of st atic electr ic ity fr om y our finger or other conduc tor can destr o y static -sensiti ve dev ice s or micr oc ir c uitr y . Often the spark is ne ither fe lt nor heard , but damage occur s. An elec troni c dev ice[...]
-
Página 76
Removal and Replacement Procedures 76 P ers onal Gr ounding Methods and E quipment Use the follo w ing equipment to pre vent stati c electri city damage to equipment: • W rist str ap s are f lex ible str ap s with a max imum of one -megohm ± 10% r esist ance in the gr ound cor ds. T o pr o vi de a proper gr ound , wear the str ap against bar e s[...]
-
Página 77
Remo val and R eplac ement Pr ocedur es Service Considerations 77 • Conducti v e plastic tubes • Conductiv e tote boxes • Opaque shie lding bags • T r anspar ent metalli z ed shielding bags • T r anspar ent shielding tu bes To o l s a n d S o f t w a r e R e q u i r e m e n t s • T or x T -15 s cr ew dr iv er or f lat-bladed scr ew dr i[...]
-
Página 78
Removal and Replacement Procedures 78 • Do not use ex cess iv e fo rce w hen inse rting a dri ve . • A voi d exposing a har d dri v e to liquids , temper ature e xtreme s, or produc ts that have magneti c fie lds such as monito rs or spe ak ers. Lith ium Coin Cell Ba tt er y The battery that comes w ith the w orkstati on pr ov ides po w er to t[...]
-
Página 79
Remo val and R eplac ement Pr ocedur es Pre-Disassembly Procedures 79 Pr e -Disa ss embl y Pr ocedur e s Before ser vic ing t he workstat ion: 1. Close an y open softw are appli cations . 2. Remo v e any disk ette or compact disc fr om the wo rkstati on. 3. Exit the oper ating sy stem . 4. T ur n off the wor kstation and an y peripher al de vi ces [...]
-
Página 80
Removal and Replacement Procedures 80 Sy s t e m B o a r d This sec tion pr ov ides additi onal infor mation about the s y stem boar d. • “S y stem Boar d Components ” on page 8 0 • “S y stem Boar d Ar chitec ture ” on page 81 S y stem Boar d Components The f ollo wing illus trati on show s the s yste m board connector s and sock ets on[...]
-
Página 81
Remo val and R eplac ement Pr ocedur es System Board 81 S y st em Boar d Ar c hitectur e The f ollo wing illu str ation sho w s the HP xw9 300 W orkst ation bloc k diagr am.[...]
-
Página 82
Removal and Replacement Procedures 82 R emo v al and R eplace ment o f C omponents This sec tion disc usses the pr ocedur es necessary to re mov e and install var ious har dw are components on yo ur wor kstation . Re vi ew the saf ety and pr ecauti ons and “Ser v ice C onsider ations ” on page 7 4 , as well as the Saf ety and Regulatory Guide ,[...]
-
Página 83
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 8 3 Disassem bl y Or der Use the follow ing table to determine th e sequence in w hich to remo ve the ma j or c omponents. Pre-Disassembly ( page 7 9 ) Lock s ( page 84 ) Acc ess P a nel ( page 86 ) Hood sensor ( page 8 8 ) Fro nt B eze l ( page 8 7 ) F ront P anel I/O De[...]
-
Página 84
Removal and Replacement Procedures 84 Sec ur it y L ock (Opti onal) If a sec urity lock is installed , re mov e it befor e servi c ing the unit. T o remo ve the sec urity lock , unlock it and slide it out of the padloc k loop as sho wn in the f ollow ing image . Ca ble L oc k (Opti onal) If a cable loc k is installed, r emo ve it be for e servi c i[...]
-
Página 85
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 8 5 Uni ver sal Chassi s Clamp Loc k If a univ ersal c hassis clamp loc k is installed , remo ve it bef or e servi cing the unit . To r e m o v e t h e l o c k : 1. Unlock the de vi ce and remo v e the locking mechanism . 2. Remo v e the scr ew attac hing the lock to the [...]
-
Página 86
Removal and Replacement Procedures 86 Ac ce ss P a ne l Befo re acces sing the internal components o f the works tation , the access panel must be r emo ved . T o r emo ve the access panel: WA R N I N G ! Bef or e re mov ing the wor kstation acce ss panel, be sur e that the workst ation is turned off and that the pow er cor d is disconnected f rom [...]
-
Página 87
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 8 7 F r ont Bez el T o r emo ve the fr ont bez el: 1. Disc onne ct power fr om the system ( page 7 9 ) and open the access panel ( page 8 6 ). 2. Li ft up on the three ta bs 1 located on the fr ont bez el. 3. Rotate the front bez el awa y 2 f rom the c hassis and r emo ve[...]
-
Página 88
Removal and Replacement Procedures 88 Hood Sens or T o r emo ve the hood sensor : 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page 86 ). 2. Unlatc h the plastic snap that s ecur es the cables insi de the chassis . 3. Disconnect the white 1x3 hood sensor connec tor fr om the in-line connector attac hed to the [...]
-
Página 89
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 8 9 F r ont P anel I/O De v i ce Ass embl y T o r emo ve the fr ont panel I/O de vi ce assembl y: 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , and r emo ve the front be z el ( page 8 7 ). 2. Unlatc h the plastic snap that se[...]
-
Página 90
Removal and Replacement Procedures 90 P o w er Bu t t on Assembl y and S y s tem Speak er The po w er button and the sy stem speak er ar e part of the same assembl y . T o r emo ve the po wer button: 1. Disc onne ct power fr om the system ( page 7 9 ) , r emo ve the access panel ( page 8 6 ) , r emov e the fr ont bez e l ( page 8 7 ) , and r emov e[...]
-
Página 91
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 9 1 P o w er Suppl y T o r emo ve the po w er supply : 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page 8 6 ). 2. Disconnec t the pow er suppl y fr om the s y stem boar d. 3. Disconnec t the pow er supply ca bles fr om the optical d[...]
-
Página 92
Removal and Replacement Procedures 92 Memor y Duct T o r emo ve the memory duct: 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page 86 ). 2. Press in to unla tc h th e plastic clip 1 and pull the duct aw ay fr om the fan 2 .[...]
-
Página 93
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 9 3 Sy s t e m Fa n T o r emo ve the s yst em fan: 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , and r emo ve the memory duct ( page 92 ). 2. Disconnec t the fan plug 1 fr om the s yst em board . 3. Pr ess in on the ribbed po[...]
-
Página 94
Removal and Replacement Procedures 94 Memor y Memory Module F eatur es • Contai ns 8 memor y slots f or DIMMS • Supports 512MB, 1GB, and 2GB pairs • Supports 1GB minimum confi gurati on (2 x 512 DIMM) • Supports 16GB maximum conf igur at i on (8GB max imum on W indow s and 16GB max imum on L inu x) • Supports dual-channel DIMMs Memor y Mo[...]
-
Página 95
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 9 5 T o inst all a memory module: CA UTION: HP onl y ships DIMMs that are elec tricall y and thermall y compatible with this pr oduct . Because thir d-party DIMMs might not be electr icall y or thermally compatible , the y are not supported by HP . NO TE: DIMMs and their [...]
-
Página 96
Removal and Replacement Procedures 96 3. Lo w er the DIMM strai ght dow n and be sure the soc ket le v ers sec ure the module int o place.[...]
-
Página 97
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 9 7 P eripher al Component Inter connect (P CI) Slots The sec tion contains inf ormati on on the fo llow ing top ics: • “PCI Slot T y pes ” on page 9 7 • “PCI C ard Support” on page 9 8 • “PCI Expr es s ” on page 99 • “PCI or P CI-X” on page 101 P [...]
-
Página 98
Removal and Replacement Procedures 98 PC I Ca rd S u p p or t F or added protecti on, so me cards hav e P CI holders installed to pre v ent mov ement during shipp ing. T o re mov e t h e c a rd s u pp or t : 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page 86 ). 2. F or shor t or tall P CI cards, lift up on t[...]
-
Página 99
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 9 9 P CI Expr es s PC I E x pre ss , a n ew ha rdwa re in te rc on ne ct s ta nd a rd (fo r exam p le, I/ O sl o ts ) , is a po in t - t o - po in t ar chitectur e and use s a seri al data transmissi on prot oc ol. A single PCI Expr ess lane consists of f our wir es and i[...]
-
Página 100
Removal and Replacement Procedures 100 T o re mov e a P CI E xp re ss ca rd : 1. Disconnect po w er fr om the s yst em ( page 7 9 ), remo v e the access panel ( page 8 6 ) and re mov e the PCI car d support ( pa ge 9 8 ), if ins talled . 2. Lif t t he PCI leve rs 1 by fir st pr essing do wn and then up . 3. Remo v e the pow er supply ca ble 2 , if [...]
-
Página 101
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 101 PC I or PC I -X NO TE: T he follo w ing illustr ation sho w s a PCI card be ing remo v ed fr om a PCI slot . A PCI-X car d is re mov ed fr om a PCI-X slot . T o r e move a PCI or PC I- X c ard: 1. Disconnect po w er fr om the s y stem ( page 7 9 ), re mov e the access[...]
-
Página 102
Removal and Replacement Procedures 102 NO TE: T he follo w ing illustr ation sho ws a P CI card be ing installed in a PCI slot . A PCI- X card must be installed in a P CI-X slot . T o inst all a PCI or P CI-X card: 1. Disc onne ct pow er fr om t he sy stem ( page 7 9 ), r em o v e th e ac c es s pa n e l ( page 86 ) , and r emo ve the P CI car d su[...]
-
Página 103
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 103 Fro n t Fa n T o r emo ve the fr ont fan: 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page 8 6 ) . 2. Disconnec t the header 1 fr om the s yst em board and thr ead it out of the card gui de. 3. Unsnap the fan hou sin g fr om the[...]
-
Página 104
Removal and Replacement Procedures 104 T o r eplace the front f an: 1. Attach the f an to the f an housing as show n in the pre v ious illu strati on. 2. Lo w er the fan holder 1 into the c hassis and snap it into place . Be sure that the airflo w dir ecti on arr ow on the side of the fan f aces the rear o f the chassis . 3. P lug the header 2 into[...]
-
Página 105
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 105 Batter y CA UTION: Be for e remo v ing the bat tery , be sure y our CMOS settings are bac ked up because all CMO S settings are lo st whe n the batter y is r emo ved . T o bac k up the CMO S settings, use C omputer Setup and ru n the Sa ve to Disk ette opti on fr om t[...]
-
Página 106
Removal and Replacement Procedures 106 P o w er Connec ti ons to Dr i v es F or help in identify ing pow er cables , r efer to the follo wing inf ormati on. R oute or tie ca bles so that ther e is no possible w ay f or them to interfer e w ith the CPU heatsink f ans.[...]
-
Página 107
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 107 Opti cal Dr i v e T o r emo ve an opti cal dri v e: 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , and r emo ve the front be z el ( page 8 7 ). 2. Disconnec t the audi o 1 , data 2 , and pow er 3 cables fr om the dri ve . [...]
-
Página 108
Removal and Replacement Procedures 108 T o r eplace an optical dri v e: 1. Slide the opti cal dri ve into the bay until it stop s. L ift the green dr i veloc k releas e lev er and push the dri v e in a fe w mor e inches , then rel ease the le ver and sli de the dri ve completel y into the bay until the dr iv e is secur ed . CA UTION: Ensur e that t[...]
-
Página 109
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 109 Disk et te Dr i v e T o r emo ve a disk ette dri ve: 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , and r emo ve the front be z el ( page 8 7 ). 2. Disconnec t the data 1 and po we r 2 cables fr om the back o f the diskett[...]
-
Página 110
Removal and Replacement Procedures 110 T o r eplace a diskette dr iv e: 1. Slide the disk ette dri ve into the br ack et and sec ur e with tw o M3 scr e ws in the r earmost hole s. 2. Slide the opti cal dri ve into the bay until it stop s. L ift the green dr i veloc k releas e lev er and push the dri v e in a fe w mor e inches , then rel ease the l[...]
-
Página 111
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 111 Har d Disk Dr i v e F or mor e infor mation on S A T A hard dr i ves and the S A T A RAID confi guration , see “S A T A Dev ices ” on page 17 7 . T o r emo ve a har d dri ve: 1. Disc onne ct power fr om the system ( page 7 9 ) and r emov e the access panel ( page [...]
-
Página 112
Removal and Replacement Procedures 112 4. Attach the r ails to the hard dr iv e by f irst ins erting the hard dr iv e rail as sembly p ins into one si de of the hard dr iv e scr e w holes. Ne xt, gentl y flex open the opposite side of the har d dri ve r ail assembly and insert the r emaining pins into the holes in the har d dri v e. I f i n st a l [...]
-
Página 113
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 113 6. Connec t the data cable to the internal S CS I connector on the s yst em board .[...]
-
Página 114
Removal and Replacement Procedures 114 Installing an Ext ernal S CS I H ar d Dri v e Y ou can add an exter nal S CSI connector t o the on -boar d S CSI contr oller . T o inst all the exter nal connector : 1. Disc onne ct pow er fr om t he sy stem ( page 7 9 ), r em o v e th e ac c es s pa n e l ( page 86 ) , and r emo ve the P CI car d support ( pa[...]
-
Página 115
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 115 Installing a S A T A Hard Dr i ve F or mor e infor mation on S A T A hard dr i ves and the S A T A RAID confi guration , see “S A T A Dev ices ” on page 17 7 . T o inst all on e to f our SAT A d ri ve s : 1. Disc onne ct power fr om the system ( page 7 9 ) and r e[...]
-
Página 116
Removal and Replacement Procedures 116 CP U Heatsink The HP W orkstati on ships w ith mor e than one type of heatsink . Use the dir ections that be st match y our heatsink. CP U Heatsink A T o r emo ve the CP U heatsink: 1. T ur n on the wor kstation and enter C omputer Setup (F10) ( page 44 ). Let the wor kstatio n run in this mode fo r fi ve min [...]
-
Página 117
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 117 4. Disconnec t the CPU heatsink cable 1 fr om the s ys tem board . 5. Rotate the latch lever a way 2 fr om the s y stem board . WA R N I N G ! T he latch lev er is spr ing loaded and could cause inj ury . Use cauti on when r otating the lat ch leve r away f rom t he s[...]
-
Página 118
Removal and Replacement Procedures 118 8. Rotate the CPU heatsin k a way 1 fr om the sy stem boar d b y lifting the si de wher e y ou r eleased the metal clamp and r otating the entir e CPU he atsink assembly awa y f rom the processor retention frame. 9. When y ou hav e rot ated the CPU heatsink as sembly a bout 45 degrees , fr ee the metal clamp 2[...]
-
Página 119
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 119 5. Hook the metal latch ov er the plastic f rame 1 and r ot ate the CP U heatsi nk do wn 2 . 6. On the opposite side , c lip the metal latch o ver the plasti c frame .[...]
-
Página 120
Removal and Replacement Procedures 120 7. Rotate the latch lever do wn 1 . It w ill be almost parallel w ith the s ytem board . 8. Connec t the CPU heatsink cable to the w hite pr ocessor f an connector 2 . CA UTION: If the CP U heatsink cable does not r eac h the fan connector , y ou hav e installed the CP U heatsink back war ds. 9. Lo w er the CP[...]
-
Página 121
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 121 CP U Heatsink B T o r emo ve the CP U heatsink: 1. T ur n on the wor kstation and enter C omputer Setup (F10) ( page 44 ). Let the wor kstatio n run in this mode fo r fi ve min utes . This acti on w arms the ther mal interface mater ial betw een the CPU heatsink and p[...]
-
Página 122
Removal and Replacement Procedures 122 4. Disconnect the CPU heatsink cable 1 fr om the sy ste m board . 5. Hold do wn 2 and pr ess in 3 on the latch lever and rotate it up away fr om the system board to re lease the c lip fr om the pr oces sor r etenti on fr ame on the s ys tem boar d. WA R N I N G ! T he latch lev er is spr ing loaded and could c[...]
-
Página 123
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 123 8. Rotate the CPU heatsin k a way 1 fr o m the sy ste m board b y lifting the si de wher e y ou r eleased the metal clamp and r otating the entir e CPU he atsink assembly awa y f rom the processor retention frame. 9. When y ou hav e rot ated the CPU heatsink ass embly[...]
-
Página 124
Removal and Replacement Procedures 124 5. Hook the metal latch o ver the plastic f rame 1 and r ot ate the CP U heats ink do wn 2 . 6. On the opposite side , push do wn on the CP U heatsink to clip the other met al latch o ver the pla stic fr ame . If necessary , use a flat-bladed sc r ew dri v er to snap the latc h ov er the hook on the plasti c f[...]
-
Página 125
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 125 7. Rotate the latch lever do wn 1 until it snaps to the pla stic fr ame . 8. Connec t the CPU heatsink cable to the w hite pr ocessor f an connector 2 . CA UTION: If the CP U heatsink cable doe s not reac h the fan connect or , you ha ve inst alled the CPU heatsink ba[...]
-
Página 126
Removal and Replacement Procedures 126 10. Lo w er the CP U airflow duc t ov er the CP U heatsinks until it snaps into place . NO TE: T he CPU airflo w duct is only r equired w hen two pr ocessors ar e installed. NO TE: T he CPU airf low du ct mor e easil y installs i f the memor y duct is te mporar ily r emov ed fi rst . 11. Install the fr ont fan[...]
-
Página 127
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 127 Pr oc essor To r e m o v e t h e p ro c e s s o r : 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , and r emo ve the CPU heatsink ( page 116 ). 2. Raise the processor sock et handle f ully (the f ull s w ing angle o f the l[...]
-
Página 128
Removal and Replacement Procedures 128 T o r eplace the process or: 1. Disc onne ct power fr om the system ( page 7 9 ) , r emo ve the access panel ( page 8 6 ) , r emo ve the CP U heatsink ( page 11 6 ) , and r emo ve the pr ocess or ( page 12 7 ). 2. Raise the processor sock et handle f ully (the f ull s w ing angle o f the lever is appr o ximat [...]
-
Página 129
Remo val and R eplac ement Pr ocedur es Removal and Replacement of Components 129 Sy s t e m B o a rd T o r emo ve the s ys tem board: 1. Disc onne ct power fr om the system ( page 7 9 ), remo ve the access panel ( page 8 6 ) , r emov e all plug-in car ds and gra phics cards ( page 100 ) , r emo ve the me mor y duc t ( page 9 2 ) , r emo ve the CP [...]
-
Página 130
Removal and Replacement Procedures 130[...]
-
Página 131
S ystem Diagnostics and T roubleshooting 131 5 S y s tem Diagno sti cs and T r oubleshootin g This c hapter disc usses the tools a vailable f or diagnosing and tr oubleshooting s y stem issues . • “E -Support” on page 13 2 • “T rouble shooting Checklist ” on page 133 • “LED Color Def initions ” on page 134 • “HP Insight Diagno[...]
-
Página 132
System Diagnostics and Troubleshooting 132 E -Support Help & Support Cent er (HS C) and E - Support HS C pro v ides online access to tec hnical support info rmation , softwar e updates and do wnloads, diagnosti c tools, and HP support contact infor mation . T o open HS C fr om yo ur desktop, c lick Start > H elp and Su pport . HS C contains [...]
-
Página 133
S ystem Diagnostics and T roubleshooting Troubleshooting Checklist 133 T r oubleshooting Chec klist Befo re r unning any of the di agnosti c utilities , go through the f ollo wing c hecklist to f ind possible so lutions for workstatio n or sof tware problem s. • Ar e the wo rkstati on and monitor connected to a w orking electr i cal outlet? • I[...]
-
Página 134
System Diagnostics and Troubleshooting 134 LED C olor De f initi ons An LED light e x ists on the fr ont panel of y our wor kstati on. T he follo w ing table desc ribes w hat each colo r signif ie s. Ta b l e 5 -2 1 LED Co lor Def initions LED State LE D Color System Status Solid Green S ystem is on. Blinking Green S y stem is in Standb y . Solid o[...]
-
Página 135
S ystem Diagnostics and T roubleshooting HP Insigh t Diagnostics Offline Edition 135 HP Insi ght Diagno sti cs Off line E diti on NO TE: HP Insi ght Diagnos tics is inc luded on CD with some com puter models only . The HP Insi ght Diagnosti cs utility allow s you to v ie w infor mation about the har dw ar e configur atio n of the computer and perfo[...]
-
Página 136
System Diagnostics and Troubleshooting 136 Quick T es t —pr ov ides a pr edetermined sc r ipt wher e a sample of each har dw ar e component is ex erc ised and requires no user intervention . Comple te T est —pr ov ides a pr edetermined sc ript w here each har d war e component is fully test ed. Y ou can select Inter activ e or Un attended test [...]
-
Página 137
S ystem Diagnostics and T roubleshooting HP Insigh t Diagnostics Offline Edition 137 Sur v e y T ab When the Sur v ey tab is selected , the Sur v e y menu displa ys and enables y ou to v ie w important sy stem con figuration in formation. Th e Summa ry vie w limits the amoun t of data displ ay ed, w hile the Adv anc ed v ie w sho w s all the data i[...]
-
Página 138
System Diagnostics and Troubleshooting 138 To b e g i n t e s t i n g : 1. Select th e T est tab . 2. On the left side of the tab, selec t the Ty p e o f T e s t to perform ( Quick , Complet e , or Custo m ). 3. On the left side of the tab, selec t the Te s t M o d e ( Interac tiv e or Una ttended ). 4. Select the de vi ce to be test ed fr om the d[...]
-
Página 139
S ystem Diagnostics and T roubleshooting HP Insigh t Diagnostics Offline Edition 139 Sa v ing and Pr inting Inf ormati on in HP Insi ght Diagn osti cs Y ou can sa ve the inf ormati on display ed in the HP Insi ght Diagnos tics S tatus and L og tabs t o a diskette or a USB 2 .0 HP Dr i ve K e y (64MB or higher ). Y ou cannot sav e to the hard dr iv [...]
-
Página 140
System Diagnostics and Troubleshooting 140 Di agnos ti c L ight C odes This s ections pr o vi des an o vervi ew o f the diagnosti c lights that ar e r elated to y our w orkstati on. NO TE: T he beeps are hear d thr ough the on -boar d piez o speake r and not the chassis speak er . The blinking lights and beeps r epeat for f i ve cy cle s . After th[...]
-
Página 141
S ystem Diagnostics and T roubleshooting Diagnostic Light Codes 141 Beeps and bli nks RED 4 times P o wer su pply f ailur e: 1. Locate the f aulty devi ce by r emov ing all dev ices and then r einstalling one at a time until w orkstati on fails. R eplace the dev ice causing the f ailure . Contin ue adding dev ices t o ensure all ar e f unctioning p[...]
-
Página 142
System Diagnostics and Troubleshooting 142 T r oubleshooting S cenar i os and S oluti ons This secti on pres ents an extensiv e ov ervie w of var i ous tr oubleshooting scenar ios and include s possible solutions f or each . Solv in g Min or P r o bl ems Ta b l e 5 -23 Solv ing M inor Pr oblems Pro blem Caus e P os sible Solut ion W orkstati on app[...]
-
Página 143
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 143 W or kstation pow ered off automaticall y and beeps and blink RED t w ice . Proce ssor thermal pr otectio n acti vat ed: A fan might be block ed or not turning . OR The CP U heatsink is not pr operl y attac hed to the pr ocessor . 1. Be sure w orks tation air ven[...]
-
Página 144
System Diagnostics and Troubleshooting 144 So lv ing P o w er Su ppl y Pr oblems T es ting P o w er Su pply Bef ore r eplac ing the po wer suppl y , use the Built-In Self- T est (BI S T) featur e to learn if the po w er supply s till work s. T o test the po w er supply: 1. Disconnect all internal po wer su pply cables . 2. Pl ug in t he AC p owe r [...]
-
Página 145
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 145 Po w e r L E D f l a s h e s R E D o n c e ever y t wo se con ds. Po w e r f a i l u r e ( p o w e r s u p p l y is ov erloaded) . 1. Check if a de vi ce is causing the pr oblem by re mov ing ALL at tac hed dev ices. P o wer on the sy stem. If the sy stem enters [...]
-
Página 146
System Diagnostics and Troubleshooting 146 So lv ing Disk ette Pr oblems Ta b l e 5 -25 Diskette Pr oblems Problem Cause Solution Diskette dri ve light stay s on . Diskette is damaged. In Windo ws, open Explor er and sele c t File > Properties > T ools . Un d er E rro r- ch e ck in g, cl ic k Check No w . Disk ette is incorr ectly inserted . [...]
-
Página 147
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 147 Cannot f ormat disk ette. Invali d media reported . When fo rmatting a disk in MS-DOS, y ou might need to specify diskette capac it y . F or ex ample, to for mat a 1.44 -MB diskette, enter the fo llow ing command at the MS-DOS pr ompt: FORMA T A: /F:1440 A pr obl[...]
-
Página 148
System Diagnostics and Troubleshooting 148 So lv ing Har d Dr i v e Pr oblems Ta b l e 5 -26 Hard Dri v e Pr oblems Problem Cause Solution Hard dri ve er ror occurs . H ar d disk has bad sectors or has failed . Use a utility to loca te and block u sage of bad sector s. If necessary , ref ormat the har d disk. Disk transac tion pr oblem. Either the [...]
-
Página 149
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 149 So lv ing Displa y Pr oblems Ta b l e 5 -27 Displa y Problems Problem Cause Solution Blank scr een (no video). The cable connecti ons are not cor rect . Chec k the cable connec tions fr om the monit or to the wo rkstation and to a wor king electr ical outlet . Th[...]
-
Página 150
System Diagnostics and Troubleshooting 150 Monitor does not funct ion proper ly when used w ith ener gy sav er feat ur es. Monitor w ithout ener gy sav er capabilities is be ing used w ith en er gy sav er feat ures enab led. Disable monitor ene rg y sav er featu re . Dim char acters . The bri ghtness and contr ast controls are not set properly . Ad[...]
-
Página 151
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 151 So lv ing A udio Pr oblems Ta b l e 5 -2 8 Au dio P r ob lem s Problem Cause Solution Sound does not come out of the speaker or headphones. So ft wa re vo lu m e c on tro l i s turned do w n. Double-click the S peake r icon on the taskbar and use the volume slide[...]
-
Página 152
System Diagnostics and Troubleshooting 152 NO TE: I f you set digital as the Output Mode , the internal speaker and external an alog speakers will no longer output au dio until you switc h back to an auto-sense or ana log mode. If you set analog as the Output Mode , external digital sp eakers will not function until you change the output mode back [...]
-
Página 153
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 153 Sol v ing Pr inter Pr oblems Ta b l e 5 -29 Print er Problems Problem Cause Solution Prin ter does not pr int. Print er is not turned on and online. T u r n the printe r on and be sure it is online . Printer is out of paper . A dd paper to printer . The corr ect [...]
-
Página 154
System Diagnostics and Troubleshooting 154 Solv in g K ey boa r d a nd Mouse Pr o ble ms Ta b l e 5 - 3 0 K e yboar d and Mous e Probl ems Problem Cause Solution K ey boar d commands and t y ping ar e not recogni z ed b y the wor ks ta tio n. K e yboar d connector is not pr operly connec ted. 1. Sh ut down th e wo rk sta ti on. 2. Reconnec t the ke[...]
-
Página 155
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 155 Sol v ing F r ont P anel C om ponent Pr oblems If y ou are e xperi encing pr oblems w ith one of the fr ont panel ports, yo u might be able to try y our dev ice in the corr es ponding port on the back si de of the compu ter . If this does not f i x the pr oblem, [...]
-
Página 156
System Diagnostics and Troubleshooting 156 So lv ing Har d w ar e Installati on Pr oble ms Y ou might need to r econf igur e the wor kstation w hen y ou add or re mov e hard war e , such as an additi onal disk ette dri ve . If y ou inst all a PnP dev i ce, W indo ws XP au tomaticall y r ecogniz es the dev ice and conf igur es the w orkstati on . If[...]
-
Página 157
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 157 Beeps and po w er LED flashe s RED si x times . Vi deo card is not seated pr operl y or is bad , or s ys tem boar d is bad. F or sy stems w ith a gr aphics car d: 1. Res eat the graphi cs card . 2. If using P CI Expre ss card w ith au xiliary po wer cable , be su[...]
-
Página 158
System Diagnostics and Troubleshooting 158 Solv in g N et w ork Pr ob le ms Thes e guidelines do not disc uss the pr ocess of debugging the netwo rk cabling . Ta b l e 5 - 3 3 Network Pr oblems Problem Cause Solution Wa k e - o n - L A N f e a t u r e i s n o t fun ctioni ng. W ak e -on-L AN is not enabled. Use the Networ k control appli cation to [...]
-
Página 159
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 159 Networ k controller stopped wor king when an ex pansion board was added to the wor ks ta tio n. Networ k controller inter rupt is shar ed with an e xpansi on board . Under the Computer Set up Ad vanced menu , change the resour ce settings f or the bo ar d. The n [...]
-
Página 160
System Diagnostics and Troubleshooting 160 So lv ing Memory Pr oblems CA UTION: F or those sy stems that support E CC memory , HP does not suppor t mi x ing EC C and non -E CC memory . O therw ise , the sy stem w ill not boot the operating s ys tem. Ta b l e 5 - 3 4 Memory Proble ms Problem Cause Solution S ystem w ill not boot or does not functi o[...]
-
Página 161
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 161 So lv ing Pr ocess or Pr oblems . Ta b l e 5 - 3 5 Proces sor Pr oblems Problem Cause Solution P oor performance is ex pe rien ce d. Proce ssor is hot . 1. Be sur e the airflow t o the wor kstatio n is not block ed. 2. Be sure the f ans are connec ted and wor kin[...]
-
Página 162
System Diagnostics and Troubleshooting 162 Solv i ng CD -ROM a nd D V D P r ob lem s Ta b l e 5 - 3 6 CD-ROM and D VD Pr oblems Problem Cause Solution S yste m will not boot fr om CD- ROM or DVD drive. The CD-ROM or DVD boot is not enabled thr ough the Computer Setup utility . R un the Computer S etup utility and enable booting to re movable medi a[...]
-
Página 163
S ystem Diagnostics and T roubleshooting Trouble shooting Scenarios a nd Solutions 163 So lv ing Inte rnet A cce ss Pr oblems Ta b l e 5 - 37 Internet Access Problems Problem Cause Solution Unable to conne c t to t he Inter net. Int ernet Servic e Provider (I SP) account is not set u p pr operl y . V er ify Internet se ttings or contact the ISP fo [...]
-
Página 164
System Diagnostics and Troubleshooting 164 Internet takes too long to do wnload W eb sites. Modem is not set up pr operl y . V er ify that the corr ect modem speed and COM port are selec ted. Fo r W in d ows : 1. Open the Contr ol P anel. 2. Double -c lick Syst e m . 3. Select the Ha rdw ar e tab . 4. In the Dev ice Manager ar ea , clic k the De vi[...]
-
Página 165
S ystem Diagnostics and T roubleshooting Power On Self Test (POST) and Error Messages 165 P o w er On Se lf T es t (P O S T) and Er r or Mes sage s PO S T is a seri es of diagno stic te sts that runs automati cally w hen the sy stem is tur ned on. An a udible, visual , or both message occ urs if the P OS T encounters a pr oblem. PO S T checks the f[...]
-
Página 166
System Diagnostics and Troubleshooting 166 164—Memory Siz e Er ror Memory configur ation is incorr ect . 1. Run Computer Setup (F10 Set u p) or Windo ws utilitie s. 2. Be sure memory modules ar e installed pr oper ly . 3. If third-party memory has been added, test using HP only memory . 4. V er ify proper memory module t y pe. 201—Memory Error [...]
-
Página 167
S ystem Diagnostics and T roubleshooting Power On Self Test (POST) and Error Messages 167 304—K eyboar d or S ystem Unit Err or Key b o a r d fa i l u r e. 1. R econnect the k ey board w ith wor kstation turned off . 2. Be sur e that none of the ke y s are pr essed . 3. Rep la ce keybo ard. 4. Replace s ys tem boar d. 501—Displa y Adapter Fa il[...]
-
Página 168
System Diagnostics and Troubleshooting 168 94 0 — E x t e n d e d R O M signatur e not fou nd The si gnatur e at the start of the RO M flash is missing . Y our fir mw are (BIOS) is incom plete. Run ROMP a q ag ai n. 960 — C PU O v e r t e m p occ urr ed The amb ient te mper ature could ex ceed oper ating limits (max imum=95°F ) , or ther e are[...]
-
Página 169
S ystem Diagnostics and T roubleshooting Power On Self Test (POST) and Error Messages 169 17 8 2—Disk Contr oller Fa il ure H ard driv e ci rcui t ry e rror . 1. Run Computer Setup (F10 Setup) . 2. Clear CMOS. 3. Check cable seating/jumper settings. 4. Run har d dri ve diagn ostics . 5. Disconnec t additional dr iv es . 6. Run the Dr i ve Pr otec[...]
-
Página 170
System Diagnostics and Troubleshooting 170 1800—T emperatur e Aler t Internal temperatur e exceeds specificat ion. 1. Check that w orkstati on air vents are not block ed and cooling f an is running . 2. V er if y pr ocessor speed selection. 3. Replace the pr oce ssor . 4. Replace the s y stem boar d. 1801—Mic rocode P atch Err or Proces sor not[...]
-
Página 171
S CS I Dev ices A 171 AS C S I D e v i c e s This appendi x pr ov ide s more inf ormati on for se tting up your S CS I hard dr i ve . • “S CSI Gui delines ” on page 17 2 • “Using S CSISelect w ith S CSI Dev ice s” on page 17 3 • “SMART ” on pa ge 17 4 • “Jumpers ” on page 17 5[...]
-
Página 172
SCSI Devices 172 SC S I G u i d e l i n e s When installing and oper ating S CS I dev ices , you mu st foll ow thes e guidelines: • A w ide (68-p in) SC SI contr oller w ith two channels , one for inter nal dev ices and one f or exter nal dev ices . F iv e inter nal SCS I dev ices ar e supported . • If multiple S CSI de v ices ar e used , split[...]
-
Página 173
S CS I Dev ices A Using SCSISelect with SCSI Devices 173 Us in g S CS I Sel ect wi t h SC S I D e vic e s The Ultr a160 and f aster S CS I host adapt ers include the S CS I Select utility to configur e the host adapter and to run the S CSI disk u tilities. T o run the S CS I Select uti lity: NO TE: T he onboard L SI S CSI contr oller on the xw9 300[...]
-
Página 174
SCSI Devices 174 SMAR T The SMAR T SC SI har d dri ve s for HP wo rkstati ons hav e built- in dr iv e failur e predi ction that w arns the us er or the networ k administr ator of an impending f ailur e or cr ash of the har d dr iv e. SMART dr iv es tr ack f ault predi ctio n and failure indi cation par ameters, su ch as r e -allocated sect or count[...]
-
Página 175
S CS I Dev ices A Jumpers 175 Jump er s All S CSI controll ers r equire a uniq ue SC SI ID (0–15) f or each S CS I dev ice inst alled. The contr oller identif ies a S CS I dev ice by its S CS I ID number rather than its location . Mov ing a S CSI de vi ce fr om one position to anothe r on the SC SI chain does not aff ect communicati on between th[...]
-
Página 176
SCSI Devices 176[...]
-
Página 177
S A T A De vi ces B 177 BS A T A D e v i c e s This appendi x pr o vi des additional inf ormati on for s etting up yo ur SA T A har d dr iv es. • “S A T A Guideline s ” on page 17 8 • “S A T A R AID Conf igur ations ” on page 17 9[...]
-
Página 178
SATA Devices 178 SA T A G u i d e l i n e s NO TE: T hese s ystems support a mi xed confi gurati on of S CSI and S A T A hard dri v es. T he HP xw9 300 W or kstation does not support IDE hard dr i ves . When installing and oper ating S A T A devi ces: • Connect the S A T A hard dr iv e fr om the sy stem boar d to the har d dri ve w ith the S A T [...]
-
Página 179
S A T A De vi ces B SATA RAID Configurations 179 S A T A R AID C onf igur ati ons This w orkst ation supports an embedded S A T A RAID . R edundant Ar ra y of Ine xpensiv e Disks (RAID) combines m ultiple phy sical dr iv es together to pr ov ide e ither incr eased perfor mance or incr eased re dundancy . F or an embedded SA T A R AID , ther e are t[...]
-
Página 180
SATA Devices 180[...]
-
Página 181
Connec tor P ins C 181 C C onnec tor P ins This appendi x pr o vi des pin inf ormatio n for y our s yst em: • “Enhanced K ey boar d” on page 18 2 • “Mouse ” on page 18 2 • “Ethernet RJ-45” on page 18 2 • “Ser ial Interface ” on page 183 • “USB” on page 18 3 • “IEEE 13 9 4” on page 18 3 • “Mic rophone ” on p[...]
-
Página 182
Connector Pins 182 Enhanced K e y boar d Mous e Ether net RJ- 4 5 Keyb oa rd Co nn e ct or Pin S ig na l 1 2 3 Data Unused Gr ound 4 5 6 +5 VDC Clock Unused Mouse Connec tor Pin Signal 1 2 3 Data Unused Gr ound 4 5 6 +5 VDC Clock Unused Ethernet Connec tor Pin Signal 1 2 3 4 (+) T r ansmit Data (-) T r ansmit Data (+) Rece ive Data Unused 5 6 7 8 U[...]
-
Página 183
Connec tor P ins C Serial Interface 183 S er ial In terf ace US B IEEE 13 9 4 Serial Connector Pin Signal 1 2 3 Carrier D etect Rec eive D at a Tr a n s m i t D a t a 4 5 6 Data T er minal Rea dy Signal Gr ound Data Set Ready 7 8 9 Request to Sen d Clear to Send Rin g In di ca to r USB Conn ector Pin S ignal 1 2 3 4 +5 VDC - Data + Data Gr ound IEE[...]
-
Página 184
Connector Pins 184 Mic r oph one Headphone L ine -in A udio Li n e - o u t Au d i o Microphone Connec tor (1/8 i nc h) Pin Signal 1 (Tip) 2 (Ring) 3 (Shield) Aud io Po w e r Gr ound Hea dph one C onn ector (1/ 8 i nch) P in S ign al 1 (Tip) 2 (Ring) 3 (Shield) Aud io_Lef t Aud io_Rig ht Gr ound Line-in Audio Connec tor (1/8 inch) P in Signal 1 (Tip[...]
-
Página 185
Connec tor P ins C Ultra SCSI 185 Ultr a S C S I Ultra SCSI con nec tor Pin S ig nal Pin S ig nal 1 +DB12 3 5 -D B12 2 +DB13 3 6 -D B13 3 +DB14 3 7 -D B14 4 +DB15 38 -DB15 5 +DPB1 3 9 -D PB1 6+ D B 0 4 0 - D B 0 7 +DB1 41 -DB1 8 +DB2 4 2 -DB2 9 +DB3 43 -DB3 10 +DB4 44 -DB4 11 +DB5 4 5 -DB5 12 +DB6 46 -DB6 13 +DB7 4 7 -D B7 14 +DPB 48 -DPB 15 GND 4 [...]
-
Página 186
Connector Pins 186 SA T A SA T A Connector Pi n Signal P in Signal Pin Signal Data Cable P ow er Cable P o wer Cable S -1 Gr ou nd P -1 3 . 3- V po w er P -8 5- V po wer S - 2* A+ P - 2 3. 3-V po wer P - 9 5-V po wer S- 3* A- P -3 3 . 3- V po w e r P -1 0 G r ou n d S-4 G r ou n d P -4 Gr o un d P -1 1 R e s e r v e d S -5** B- P -5 Gr ound P - 12 [...]
-
Página 187
Connec tor P ins C Monitor (VGA) 187 Monitor (V G A ) NO TE: Monitor connec tors can v ary depending on y our conf igur ation . Monitor (D VI) NO TE: Monitor connec tors can v ary depending on y our conf igur ation . VGA C on n ec to r Pi n Signal P in Signal P in Sign al 1 2 3 Re d Analog Green Analog Blue Analog 6 7 8 Ground Ground Ground 11 12 1[...]
-
Página 188
Connector Pins 188 A T A/A T AP I (I DE) S tandar d Dr i v e C able 13 T .M.D .S D A T A 3+ C4 A NAL OG HOR Z S YNC 14 +5V P OW ER C5 ANAL OG GROUND 15 GND ATA / ATA P I ( I D E ) C o n n e c t o r Pi n Signal P in Signal P in Signal 1 2 3 4 5 Rese t Ground DD7 DD8 DD6 15 16 17 18 19 DD1 DD14 DD0 DD15 Ground 29 30 31 32 33 DMAK Gr ound INTRQ IOCS16[...]
-
Página 189
Connec tor P ins C 24-Pin Power (Mai n) 189 2 4 -P in P o w er (Main) 8-P in P o w er (f or Pr oce sso rs) 1 24-Pin Main P o wer Connec tor 1 2 3 4 5 6 7 +3 .3 V +3 .3 V GND +5 V GND +5 V GND 8 9 10 11 12 13 POK +5 V au x +12 V -A +12 V -A +3 .3 V +3 .3 V and +3 .3V -Rsense 14 15 16 17 18 19 20 -12 V GND P S_ON_L GND GND GND 21 22 23 24 +5 V +5 V a[...]
-
Página 190
Connector Pins 190 6- P i n P o w e r ( A u x i l i a r y P C I E x p r e s s ) NO TE: T he 6 -pin po w er (aux ili ar y P CI Expr ess) is only r equir ed w ith high-po we red gra phics cards . 6-Pin P o wer (Aux iliary PCI Express) Pin Color Signal 1 YEL +1 2V -C 2 YEL +1 2V -C 3 YEL +1 2V -C 4B L K G N D 5B L K G N D 6B L K G N D 46 3 1[...]
-
Página 191
S y stem Boar d Desi gnators D 191 D S y stem Boar d Designator s This ap pendix list s the system bo ar d designators f or this sy stem . Ta b l e D - 39 Sy ste m Board Desi gnators Designator Silkscreen Component MH1-8, MH10 -11, MH14 N/ A Mounting holes E14 N/A Boot bloc k header/j umper E4 9 PS WD C lear passw ord header/jumper J20 SL O T2 PCI [...]
-
Página 192
System Board Design ators 192 P20 N/A Prima r y IDE connecto r P2 3 FRNT A UD F ront panel a udio header P2 4 FRNT USB Fr ont panel U SB header P2 9 HD-LED HDD LED connector P5 0 S A T A1 port 2 Ser ial A T A (S A T A ) port 2 connector P51 S A T A1 port 3 Seri al A T A (S A T A) port 3 connect or P5 2 S A T A0 Ser ial A T A (S A T A) port 0 and 1 [...]
-
Página 193
P ow er Cord Set Requirements E 193 E P o w er C or d Set R equir ements The po we r cord se t (fle xible cor d or wall plug) r ecei v ed with this pr oduct meets the r equir ements for use in the country w here y ou pur chased the equipment . If yo u must obtain a po w er cord f or a differ ent co untry , y ou should pur chase a po w er cord that [...]
-
Página 194
Power Cord Set Requirements 194[...]
-
Página 195
R outine Car e F 195 F R outine Car e This appendi x contains the additional inf ormati on for car ing for y our s ystem: • “Gener al Cleaning Sa fety Pr ecautions ” on page 19 6 • “Max imi zing the Airflo w” on page 19 7 • “Cleaning the W orkst ation Cas e” on page 19 8 • “Cleaning the K ey boar d” on page 19 9 • “Clean[...]
-
Página 196
Routine Care 196 Gener al Cleaning S afe t y Pr ecauti ons • Nev er us e sol vents o r flammable solu tions to c lean the w orkst ation . • Nev er immerse an y parts in water or c leaning solutions; a pply an y liquids to a c lean cloth and then use the c loth on the co mponent . • Al wa ys unplug the w orkst ation when cleaning w ith liqui d[...]
-
Página 197
R outine Car e F Maximizing t he Airflow 197 Max imi zing the A irflo w K eep y our wor kstation in an ar ea whe re the airflo w to the fr ont and r ear of the sy stem is not obs truct ed. • If possible, k eep the unit off of surfaces wher e dust can gather . • K eep the back o f the unit at least 6 i nch es a wa y fr om a wall or other obstruc[...]
-
Página 198
Routine Care 198 C leaning the W or kstati on Ca se F ollo w pre vi ousl y stated saf ety pr ecauti ons befor e c leaning the works tation . T o c lean the wor kstation cas e: • T o r emo ve light s tains or dirt, us e plain water w ith a clean , lint -f ree c loth or sw ab . • F or str onger stains , use a mild dish-w ashing liquid di l ut ed [...]
-
Página 199
R outine Car e F Cleaning the Keyboard 199 C leaning the K e y boar d F ollow all saf ety precautions stated earli er befor e cleaning the k e yboar d. CA UTION: U se safe t y glas ses equipped w ith side shi elds be for e attempting to clean debr is fr om under the k ey s . • Visible debr is underneath or between the k e ys can be re mov ed by v[...]
-
Página 200
Routine Care 200 C leaning the Monitor F ollow all saf ety precautions stated earli er befor e cleaning the monitor . T o c lean the monitor , wipe the monitor sc reen w ith a clean cloth mo istened w ith water or w ith a tow elette designed f or cleaning monit ors. Do not u se spra y s or aero sols dire ctly on the sc r een; the liquid mi ght seep[...]
-
Página 201
R outine Car e F Cleaning the Mouse 201 C leaning the Mouse F ollow all saf ety precautions stated earli er befor e cleaning the mouse . T o clean the mous e: • Clean the mouse ball b y f irst r emov ing the r etaining plate and the ball fr om the housing. • P ull out any debr is fr om the ball soc ket and w ipe the ball with a c lean, dry clot[...]
-
Página 202
Routine Care 202[...]
-
Página 203
Additional P assw or d Secur ity and R esetting CMO S G 203 G Additi onal P as s w or d Sec ur ity and Re se t t i n g C M OS This w orkst ation supports sec urity pass w ord f eature s, whi ch can be es tablished thr ough the Computer Setup Sec urity menu . These f eatures ar e: • setup pass w ord • pow er -on pass wor d When both pass w ords [...]
-
Página 204
Additional Password Security and Resetting CMOS 204 R eset ti ng t he P ass w o r d Jump er T o disa ble the pow er -on or setup pass wo rd fe atures and c lear the pow er -on and setup pass w ords: 1. Shut do wn the oper ating sy stem and then tur n off the wor kstation and an y exte rnal dev ices . Disconnec t the po wer cor d of the w orkstati o[...]
-
Página 205
Additional P assw or d Secur ity and R esetting CMO S G Clearing and Resetting the CMOS 205 C lear ing and R es etting the CMO S The CMO S of the wo rkstati on stor es pass wor d inf ormation and inf ormati on about the wor kstatio n confi guratio n. This s ection desc ribes the s teps to successfull y clear and re set the CMOS . Using C omputer S [...]
-
Página 206
Additional Password Security and Resetting CMOS 206 Usi ng the CMOS But ton CA UTION: P ushing the CMOS button r esets CMO S value s to factory defa ults and eras es any c ust omiz ed infor mation inc luding passw or ds, as set numbers , and speci al settings. It is important to back up the wor kstati on CMO S settings befo re r ese tting them in c[...]
-
Página 207
Quick T roubleshooting F lo ws H 207 HQ u i c k T r o u b l e s h o o t i n g F l o w s This appendi x pr esents some qui ck tr oubles hooting f lowc harts for some common is sues. NO TE: T he flo wcharts pre sented here ar e f or general tr oubleshooting purposes onl y and the y might not apply to y our spec if ic w orkstati on. • “Initial T r[...]
-
Página 208
Quick Troubleshooting Flows 208 Initi al T r ouble shooting[...]
-
Página 209
Quick T roubleshooting F lo ws H No Power 209 No P o w er No P o w er , P ar t 1[...]
-
Página 210
Quick Troubleshooting Flows 210 No P o w er , P ar t 2[...]
-
Página 211
Quick T roubleshooting F lo ws H No Power 211 No P o w er , P ar t 3[...]
-
Página 212
Quick Troubleshooting Flows 212 No V i deo No V ideo , P art 1[...]
-
Página 213
Quick T roubleshooting F lo ws H No Video 213 No V ideo , P art 2[...]
-
Página 214
Quick Troubleshooting Flows 214 No V ideo , P art 3[...]
-
Página 215
Quick T roubleshooting F lo ws H Error Messages 215 Err or Mes sages Err or M essag es , P ar t 1[...]
-
Página 216
Quick Troubleshooting Flows 216 Err or M essag es , P ar t 2[...]
-
Página 217
Quick T roubleshooting F lo ws H Error Messages 217 Err or M essag es , P ar t 3[...]
-
Página 218
Quick Troubleshooting Flows 218 No O S L oading[...]
-
Página 219
Quick T roubleshooting F lo ws H No OS Loading from Hard Drive 219 No O S L oading fr om H ar d Dr i v e No O S L oading fr om Har d Dr i v e , P art 1[...]
-
Página 220
Quick Troubleshooting Flows 220 No O S L oading fr om Har d Dr i v e , P art 2[...]
-
Página 221
Quick T roubleshooting F lo ws H No OS Loading from Hard Drive 221 No O S L oading fr om Har d Dr i v e , P art 3[...]
-
Página 222
Quick Troubleshooting Flows 222 No O S L oading fr om Disk e t te Dr i v e[...]
-
Página 223
Quick T roubleshooting F lo ws H No OS Loading from CD-ROM Drive 223 No O S L oading fr om CD-R OM Dr i v e[...]
-
Página 224
Quick Troubleshooting Flows 224 No O S L oading f r om Net w ork[...]
-
Página 225
Quick T roubleshooting F lo ws H Non-functioning Device 225 Non -func ti oning De v i ce[...]
-
Página 226
Quick Troubleshooting Flows 226[...]
-
Página 227
Inde x Index 227 24-pin power connector pin assignments 189 6-pin PCI Express connector pin assignments 190 8-pin power for processors connector pin assignments 189 A access panel, installing and removing 86 airflow 28 asset tracking and security 64 B battery disposal 78 handling 78 installing and removing 105 real-time clock 142 bezel blanks, inst[...]
-
Página 228
Index 228 heatsink, installing and removing 116 hood cover installation and removal 86 HP Client Management Solutions 54 I IDE connecto r pin assignments 188 IEEE-1394 front panel location 19 rear panel location 20 informatio n system 47 initial configuration 55 installing access panel 86 battery 105 bezel blanks 87 DIMMs 94 diskette drive 109 fron[...]
-
Página 229
Inde x Index 229 protecting hard drive 71 R rear panel components 20 recovery, software 55 remote setup 56 Remote System Installation 56 removable media boot 49 removal and replacement 82 removing access panel 86 battery 105 bezel blanks 87 DIMMs 94 diskette drive 109 front bezel 87 front fan 103 front panel I/O device assembly 89 hard drive 111 he[...]
-
Página 230
Index 230[...]