Humminbird 1157C manual

[...]

[...]

i Th a n k Y o u ! Thank y ou for choosing Humminbird®, America's #1 name in fishfinders. Humminbir d® has built its reputation by designing and manufacturing top-quality , thoroughly reliable marine equipment. Y our Humminbird® is designed for trouble-fr ee use in even the har shest marine environment. In the unlikely event that your Hummi[...]

ii T able of Contents 1100 Series™ Introduction 1 How Sonar W orks ................................................................................................................ ........................ 1 High Definition Side Imaging Sonar (1197c SI Combo models only) ............................................................ 3 DualBeam PLUS?[...]

iii T able of Contents Understanding Side Imaging (1197c SI Combo models only) 53 What’s on the Side Imaging Display ............................................................................................. ........... 54 Side Imaging T echnology: How It W orks ..................................................................................[...]

iv T able of Contents Navigate to a W aypoint or Position ............................................................................................. ............. 97 Add a W aypoint T arget or T rolling Grid ......................................................................................... ........... 98 Save, Edit or Delete a Route .....[...]

v T able of Contents Navigation X -Press™ Menu 120 Active Side .................................................................................................................... .......................... 121 Split Position ................................................................................................................. ........[...]

vi T able of Contents Noise Filter (Advanced) ............................................................................................................................ 136 Max Depth (Advanced) ............................................................................................................................ 137 W ater T ype (Advanced) .[...]

Alarms Menu T ab 152 Alarm V olume ................................................................................................................... ....................... 153 Depth Alarm .................................................................................................................... ........................ 153 Fish ID Alarm[...]

viii T able of Contents V iews Menu T ab 170 Accessories Menu T ab 171 Using Screen Snapshot 172 T roubleshooting 174 1100 Series™ Doesn’t Po wer Up .................................................................................................. .......... 174 1100 Series™ Defaults to Simulator with a T ransducer Attached ..................[...]

1100 Series™ Introduction Y our 1100 Series™ Ultra Wide Screen Fishing System comes in sev eral different configur ations. See the following list of products, all of which ar e cover ed by this manual, to find your 1100 Series™ configuration: • Humminbird® 1157c/1157c NVB DualBeam Combo: Ultra Wide Screen Fishing System with Chartplotter ([...]

When all the echoes are viewed side b y side, an easy to interpret "graph" of the bottom, fish and structure appears. The sound pulses are transmitted at various fr equencies depending on the application. V ery high frequencies (455 kHz) are used for greatest definition but the operating depth is limited. High frequencies (200 kHz) are co[...]

High Definition Side Imaging Sonar (1197c SI Combo models only) Y our 1100 Series™ 1197c SI Combo uses Side Imaging sonar to provide a wide yet precise survey of a lar ge area of water , including detailed bottom topography and fish-attracting structur e orientation. The Side Imaging transducer returns are pr ocessed into an image similar to an a[...]

QuadraBeam PL US™ Sonar (optional-purchase QuadraBeam PL US™ transducer only) Y our 1100 Series™ Fishing System supports the optional- purchase QuadraBeam PL US™ transducer . QuadraBeam PLUS™ sonar pro vides an extremely wide (90°) area of coverage. Quadr aBeam PLUS™ starts with two f an-shaped 35° 455 kHz Side Structure locating sona[...]

The GPS Receiv er included with your 1100 Series™ Fishing system allo ws you to combine easy-to-use fishing system and navigation capabilities. T he following GPS functionality is currently supported b y the 1100 Series™ Fishing system when it is connected to the included GPS receiv er: • V iew current position • V iew current tr ack (bread[...]

Softwar e Updates Use the MMC/SD slot to update the software ver sion of your control head. T o update the software in your control head, plug in the appropriate MMC/SD card that contains a softw are update file; the unit will recognize it, will tell you what softw are ver sion your control head is currently running, and will ask y ou if you want t[...]

Installation Overvie w Please read all instructions that are rele vant for y our configuration before beginning the installation process. NO TE: Installation procedures will depend on pr oduct configuration. Power Temp/Speed Temperature GPS Receiver WeatherSense® T ransducer 1 2 3 6 7 8 Speed through water Video Out 4 Optional “Y” Cable 5 6 9 [...]

Inside the boat there is often a channel or conduit used for other wiring, this can be used to route cables. Be sure to route the cables as far as pr actical from the antenna cable of VHF radios or tachometer cables to reduce the possibility of interference. T he GPS receiver cable should not be cut, and care should be used not to damage the cable [...]

Control Head Installation Y ou have two choices for mounting your 1100 Series™ control head, Gimbal mounting , where you use a surface on the boat, such as the dash, to mount the control head so that it can be tilted up or down, or In- dash mounting . Gimbal Mounting the Control Head If you are gimbal mounting the Humminbird® 1100 Series™, y o[...]

NO TE: Y ou must have underside access to the mounting location to pass the cables through to the surf ace. Also, make sure that the mounting surf ace is adequately supported to protect the control head fr om excessive wave shock and vibration and pro vide visibility while in operation. NO TE: Go to the installation instructions applicable to your [...]

6b. If the cables cannot be routed dir ectly beneath the mounting bracket, mark and drill a 1" (25 mm) hole that will allow you to run the cables close to the brack et. Pass the cables thr ough the 1" (25 mm) hole, routing the cables through the grommet and pr essing the grommet into place. Place the hole cover ov er the mounting surface [...]

9. Thr ead the cables through the opening in the back of the cable collector cov er . 10. Insert cable connectors into the proper recesses on the cable collector insert. T he cable connectors are ke yed to pre vent rev erse installation, so be careful not to for ce the connectors into the wrong slots. If you don’t hav e a cable for ev ery hole in[...]

12. Attach the cable collector insert to the cable collector cover using the (2) #6 Phillips screws provided. 13. Place the control head back onto the mounting bracket. Plug the assembled cable collector into the back of the control head, pushing gently but steadily until you feel the collector snap into place. Cable connectors and cable sockets ar[...]

In-Dash Mounting the Control Head If you are in-dash mounting the control head, start b y placing the components on the surfaces where y ou intend to install them before installation. Make sur e that the surfaces you ha ve chosen provide adequate protection from wa ve shock, and that all cables can reach the contr ol head. NO TE: If a cable is too [...]

7. Insert cable connectors into the proper r ecesses on the cable collector insert. The cable connectors are ke yed to pre vent rev erse installation, so be careful not to for ce the connectors into the wrong slots. If you don’t hav e a cable for ev ery hole in the insert, install the blank plugs to protect the control head from the w eather . 8.[...]

NO TE: Y ou may wish to dress the cabling with nylon wire ties in or der to hold the cables together and create a cleaner assembly . NO TE: It is very important that the cable collector is used and secured in place in the In-Dash installation. The Humminbir d® 1100 Series™ control head is now ready f or operation. Plugging the Assembled Cable Co[...]

Connecting the Control Head P ower Cable to the Boat A 6' (2 m) long power cable is included to supply pow er to the control head. Y ou may shorten or lengthen the cable using 18 gauge multi-stranded copper wire. CAUTIO N: Some boats have 24 or 36 V olt electric systems, but the control head MUST be connected to a 12 VDC power supply . The con[...]

T ransducer Installation Overvie w The 1157c Combo units and the 1197c SI Combo units use tw o different types of transducer s. Find the installation section that describes your transducer type. 1197c SI T ransducer Installation (1197c SI Combo models only) If you have a 1197c SI Combo unit, ther e are two diff erent installation methods for your t[...]

T ransom T ransducer Installation (1197c SI Combo models only) If you will be installing a transom mounted transducer , use the procedures in this section. There ar e two pieces to the transducer mount assembly: the piv ot, and the bracket. Y our transducer comes with a two- piece metal and plastic bracket assembly . There are se veral procedur es [...]

• The best w ay to locate turbulence-free water is to vie w the transom while the boat is moving. T his method is recommended if maximum high-speed operation is a high priority . If this is not possible, select a location on the transom where the hull forw ard of this location is smooth, flat and free of protrusions or ribs. • The h ydrodynamic[...]

4. Using a 5/32" (4.0 mm) bit, drill the three holes to a depth of approximately 1" (25 mm). On fiberglass hulls, it is best to use progressively lar ger drill bits to reduce the chance of chipping or flaking the outer coating. Use a marine-grade silicone sealant to fill the drilled holes. 5. Align the metal mounting bracket with the moun[...]

NO TE: The running position of the transducer is no w completely adjustable. Subsequent adjustment may be necessary to tweak the installation after high speed testing. T o adjust the running position of the transducer: The tr ansducer mounting bracket allows height and tilt adjustment, while the piv ot bolt allows angular adjustment. These adjustme[...]

T o route the tr ansom transducer cable: The tr ansducer cable has a low profile connector that must be routed to the point wher e the control head is mounted. Ther e are sever al ways to r oute the transducer cable to the area where the contr ol head will be installed. The most common pr ocedure routes the cable through the tr ansom into the boat.[...]

T est and Finish the T ransducer Installation When you ha ve installed both the control head, the transducer , and accessories and have routed all the cables, you must perform a final test befor e locking the transducer in place. T esting should be performed with the boat in the water , although you can initially confirm basic operation with the bo[...]

1157c T ransducer Installation (1157c Combo models only) If you have a 1157c Combo model, ther e are three diff erent installation methods for your tr ansducer: • T ransom T ransducer • Inside the Hull T ransducer • T rolling Motor T ransducer . Y our 1100 Series™ uses a T wo Piece Kick-up transducer mounting brack et. Find the section that[...]

1. Locating the transducer mounting location NO TE: If transom mounting is not possible because of a stepped hull or cavitation noise, and you hav e a single layer fiberglass hull, In-hull installation is an option. See Inside the Hull T ransducer Installation for more information. T urbulence: Y ou must first determine the best location on the tra[...]

• On boats with stepped hulls, it may be possible to mount the transducer on the step. Do not mount the transducer on the transom behind a step to av oid popping the transducer out of the water at higher speeds; the transducer must remain in the water f or the control head to maintain the sonar signal. • If the transom is behind the propeller(s[...]

NO TE: If you have a flat -bottomed aluminum boat, some additional adjustment may be needed to accommodate the rivets on the bottom of the boat (i.e. the gap may need to be a little smaller than 1/8"). This will help you to av oid excessive turbulence at high speeds. NO TE: If your propeller moves clockwise (in forw ard, as you're f acing[...]

NO TE: It is important to take your measurement in the figur e showing Measuring the T ransom Angle , from ex actly 12 inches down from the top of the transom. 2. Place the two ratchets, one on either side of the transducer knuckle, so that the beads on each ratchet line up with the desired position number on the knuckle. If you are setting the rat[...]

3. Put the pivot bolt through the assembly to hold it in position and loosely install the nut, but do NOT tighten the nut at this time. Insert the piv ot arm assembly into the mounting bracket. Do NO T snap the assembly closed, as you will need to access the mounting bracket in the next step. NO TE: If the pivot assembly is snapped closed ov er the[...]

7. Adjust the transducer assembly vertically , until the seam on the leading edge of the transducer (the edge closest to the transom of the boat) is level and just slightly belo w the hull. NO TE: The transducer has a natural downw ard slant of 4-5 degrees fr om leading edge (closest to the boat transom) to trailing edge (f arthest away fro m th e [...]

4. Routing the Cable The tr ansducer cable has a low profile connector , which must be routed to the point where the control head is mounted. Ther e are sever al ways to r oute the transducer cable to the area where the contr ol head is installed. The most common pr ocedure routes the cable through the tr ansom into the boat. NO TE: Y our boat may [...]

5. Connecting the Cable Insert the transducer cable into the appropriate terminal slot. T he cable connectors are labeled, and there are corresponding labels on the cable holder on the r ear of the control head. T he slots are ke yed to prevent r ever sed installation, so be careful not to force the connector into the holder . Refer to your manual [...]

6. Once you have r eached a consistently good sonar signal at the desired speeds, you ar e ready to lock down the transducer settings. F orce the pivot to the Up position to gain access to the mounting screws, then re-align the mounting br acket against the transom of the boat to match the traced silhouette. Check the bracket position with the le v[...]

Locking Down the T ransducer (Optional) NO TE: Y ou have the option to lock down the T wo Piece Kick Up bracket if you do not w ant the transducer to kick up. Please be awar e, howe ver , that the transducer can be damaged if it is locked down and it strikes debris in the water . 1. T o lock down the transducer , trace the position of the mounting [...]

Inside the Hull T ransducer Installation (1157c Combo models only) If you choose to mount your transducer inside the hull of y our boat, perform the procedur es in this section. In-hull mounting generally produces good results in single thickness fiber glass-hulled boats. Humminbird® cannot guarantee depth performance when transmitting and r eceiv[...]

• As a general rule, the faster the boat can tra vel, the further aft and closer to the centerline of the hull the transducer has to be located in order to remain in contact with the w ater at high speeds. 2. T rial installation Y ou will not be able to adjust the mounting after an inside the hull transducer is installed. It is best, therefore, t[...]

4. Fill the hull with enough w ater to submerge the transducer body . Use a sand-filled bag or other heavy object to hold the transducer in position. T he transducer cannot transmit through air , and the water purges any air fr om between the transducer and the hull, and fills an y voids in the coarse fiberglass surface. 5. V iew the sonar signal o[...]

5. Coat the face of the transducer and the inside of the hull with epoxy . 6. Press the transducer into place with a slight twisting motion to purge an y trapped air from underneath, keeping the end of the transducer that has the mounting knuckle pointed forw ard, towards the bo w of the boat. NO TE: Proper operation r equires the end of the transd[...]

T rolling Motor T ransducer Installation If you want to install your tr ansducer on a trolling motor , use this procedure. Sever al styles of the transducer are compatible with trolling motor mounting. If y ou have a tr olling motor bracket, ref er to the separate installation instructions that are included with the brack et. T rolling Motor T rans[...]

Stem Mounting with an Existing 1" - 14 T hread Stem Follow these steps to stem mount the GPS r eceiver: NO TE: If you have an existing stem f or mounting the GPS receiver , proceed directly to step 2 of the follo wing procedure. 1. Determine the best location to mount your GPS receiver . Preplan and test the cable routing to your control head [...]

Access Under Mounting Location Follow these steps to deck mount the GPS r eceiver when routing the cable down thr ough the mounting location: 1. Determine the best location, then test route the 20' (6 m) cable from the mounting location to the control head. NO TE: Installation details may vary with unit configuration. 2. Mark the mounting loca[...]

No Access Under Mounting Location Follow these steps to deck mount the GPS r eceiver in a situation where you must r oute the cable to the side because there is no space for a cable underneath the mounting location. 1. Determine the best location, then test route the cable from the mounting location to the control head. NO TE: AS-EC10 10' exte[...]

Finish Routing the Cable and Check GPS Receiv er Operation After installing a GPS receiver , you should perform the follo wing procedure to finish routing the GPS cable to the control head and to check to make sure that the contr ol head is working correctly . 1. Secure the cable along its path to the control head as needed with cable ties. 2. Plug[...]

T esting the System Installation After you have completed the installation of the contr ol head and any other accessories such as the GPS receiver , and have made all the cabling connections requir ed, you must test the installation before using the system. T o test the installation: 1. Press the POWER/LIGHT key on the control head once to turn on [...]

Getting Started - Using Y our 1100 Series™ Y our 1100 Series™ user interface is easy to use. A combination of keys, different views, and situation- specific, customizable menus allows you to control what y ou see on the color display . Refer to the following illustration, and see K ey Functions , Vi ew s , and The Menu System for mor e informat[...]

P owering Up the Control Head T urn on your Fishing System by pr essing the POWER/LIGHT key . The Title scr een is displayed until the Fishing System begins operation. Y our 1100 Series™ will begin Normal or Simulator operation, depending on the presence or absence of a transducer . 1100 Series™ Title Scr een 47[...]

What’s On the Sonar Displa y The 1100 Series™ can displa y a variety of useful information about the area under and adjacent to y our 48 Depth - water depth; can be set to alarm when the water becomes too shallow. Temperature - water surface temperature Speed - if a Speed accessory or GPS Receiver is attached, the 1100 Series™ can display the[...]

49 boat, including the following items: 7 8 10 3 4 5 6 9[...]

Understanding Sonar History It is important to understand the significance of the 1100 Series™ display . The display does NO T show a literal 3-dimensional representation of what is under the w ater . Each vertical band of data received by the control head and plotted on the display repr esents something that was detected by a sonar r eturn at a [...]

Sonar Bottom Presentation As the boat moves, the unit charts the changes in depth on the display to cr eate a profile of the Bottom Contour . The type of bottom can be determined fr om the return charted on the display . A Hard Bottom such as compacted sediment or flat rock appears as a thinner line across the displa y . A Soft Bottom such as mud o[...]

WhiteLine® highlights the str ongest sonar returns in white, resulting in a distinctiv e outline. This has the benefit of clearly defining the bottom on the display . 52[...]

Understanding Side Imaging (1197c SI Combo models only) It is important to understand how Side Imaging technology produces the displa y available on the 1100 Series™. The images y ou see on the display are produced using sonar technology . The special transducer produces three distinct beams – one beam facing do wn and two beams pointing out to[...]

What’s on the Side Imaging Displa y (1197c SI Combo models only) Side Imaging displays a number of easily recognizable featur es that allow for accur ate interpretation of sonar return. For example, r ock and gravel pr ovide a clearer sonar return than mud and sand because of that face awa y from the transducer . Y ou can find a number of easily [...]

55 bottom contour and structure. For Side Imaging, the bottom composition determines the intensity of the their relative density . Upward slopes that face the transducer reflect sonar better than do wnward slopes Imaging display that allow for accur ate interpretation of bottom contour and structure, including the 7 3 4 5 6 8 10 11[...]

Side Imaging T echnology: Ho w It W orks (1197c SI Combo models only) Side Imaging sonar uses two very precise sonar beams that ar e directed to either side of the boat and “illuminate” the bottom contour , structure, and fish, and display results in a “picture-like” image. • Side beams are extremely narro w from front to back, and pr ovi[...]

Side Imaging: On the W ater Interpretation (1197c SI Combo models only) Use the following side imaging examples to help you interpr et the side imaging display . Imaging Tips Boat speed: Side imaging is best performed at boat speeds between 2 to 6 mph. If the boat is stationary , the same information is displayed o ver and ov er . If the boat is mo[...]

Submerged Bridge 1 Submerged Bridge, Alternative P erspective 1 Submerged Timber 1 Submerged T ree 2 Submerged Ravine with T imber Submerged Ravine 3 Possible Drop Off 4 4 3 1 2 58[...]

Swimming Pool 1 Submerged Swimming P ool 1 Bait Fish 1 Submerged Standing and Fallen T imber , Plus Bait Fish Standing and Fallen Timber 2 1 2 59[...]

Dumped Logs 1 Submerged Barge with Dumped Logs Submerged Barge 2 1 2 60[...]

Ke y Functions Y our 1100 Series™ user interface consists of a set of easy-to-use keys that work with v arious on-screen views and menus to give you flexibility and contr ol over y our fishing experience. Y our control head has the following ke ys: • POWER/LIGHT key • VIEW key •M E N U k e y • 4-WA Y Cursor Control key • VIEW PRESET key[...]

MENU Ke y The MENU k ey is used to access the menu system. Start-Up Options Menu - Press the MENU key during the pow er up sequence to view the Start -Up Options menu. X-Pr ess™ Menu - Press the MENU ke y once for the X -Press™ Menu. The X -Press™ Menu allows you to access frequently-used settings without ha ving to navigate through the whole[...]

VIEW PRESET Ke ys The VIEW PRESET k eys are used to progr am your three f avorite views f or quick retrieval. Instead of using the VIEW key to cycle through e very view to find the one y ou want, you can program the VIEW PRESET keys to displa y a specific view immediately . T o program each VIEW PRESET key , use the VIEW key to cycle to the view y [...]

MARK Ke y Press the MARK key while in an y view to mark the position of a wa ypoint, either at the current boat location, or , if the Cursor is active, at the current Cursor location. The MARK k ey only functions if you hav e the GPS receiver connected, or if y ou have enabled Screen Snapshot from the Accessories menu tab. If you hav e enabled the [...]

Vi ew s The vie ws available on your 1100 Series™ ar e: When the VIEW ke y is pressed, the display cycles through the a vailable views. W hen the EXIT key is pressed, the display cycles through the a vailable views in r everse or der . Any view can be hidden or displayed as part of the view r otation using the V iews Menu tab. NO TE : When you ch[...]

Side Imaging V iew (1197c SI Combo models only) Side Imaging Vie w shows a shadow ed right- and left -looking view from the boat as the boat passes over the bottom. See Side Imaging: On the W ater Interpretation for more information about interpreting the Side Imaging view . In this view , you can change which side you look at, the sensitivity of t[...]

Freez e Fr ame - Pressing an y arrow on the 4-W AY Cur sor Control key will fr eeze the screen in the Side Imaging V iew and a cursor and cur sor dialog box will be displayed on the screen. T he cursor can be positioned on the display using the 4-W A Y Cursor Control key to determine the depth of an y sonar return. In addition, see the effects of m[...]

Te m p : water surface temperature 10 Speed: speed of boat 11 Course: the current direction the boat is traveling measured in degrees from North 12 VL T: Voltage 13 Full Range View 14 15 Side Imaging Vie w , with Active Cursor and Zoom 9 10 11 12 Cursor Info Box 1 Depth of Cursor 2 Depth Below Cursor 3 Distance to Cursor 4 Bearing to Cursor 5 Zoom [...]

Sonar V iew Sonar Vie w pr esents a historical log of sonar returns. T he most recent sonar returns ar e charted on the right side of the window; as new information is r eceived, the older information is mo ved across the display to the left. A scale with Upper and Lower Depth Range readouts appear s along the right edge of the Sonar V iew . The sc[...]

NO TE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom. T his usually happens if the water is too deep, the transducer is out of the w ater , the boat is moving too fast, or f or any other reason that the unit can’t accurately r eceive continuous data. Cursor Info Box Depth Lines 1 Depth of Cursor 2 D[...]

Sonar Zoom V iew Sonar Zoom Vie w incr eases the displayed r esolution to separate sonar returns that are v ery close together , such as those caused by fish suspended close to the bottom or within structure. In Zoom V iew , the display is split to show a narrow slice of the full r ange view on the right and the zoomed vie w on the left. The full r[...]

Split Sonar V iew Split Sonar Vie w displa ys sonar returns from the 83 kHz wide beam on the left side of the scr een and displays sonar returns from the 200 kHz narr ow beam on the right side of the screen. Y ou can use the Split Sonar V iew to make side b y side comparisons between the sonar returns from the 83 kHz wide beam and the 200 kHz narro[...]

Side/Sonar Combo V iew (1197c SI Combo models only) Side/Sonar Combo Vie w shows regular sonar inf ormation and side imaging sonar information in a combination split screen. Y ou can perform any of the functions for either of these views, but only when the view you want to contr ol is selected as the active side (see Sonar X -Press™ Menu: Active [...]

Snapshot and Recording V iew Snapshot and Recording V iew displays and allo ws you to view both scr een snapshot thumbnails and recording icons captured to an optional-pur chase MMC/SD card installed in your unit. In addition, when y ou are in the Snapshot and Recording V iew , Start Recording, Stop Recording, Delete Image, Delete All Images, Delet[...]

NO TE: For snapshots and r ecordings, the indicator bar has sev eral states: during recor ding, the amount of space remaining on the MMC/SD card is indicated on the status bar . During playback, the amount of time/memory remaining to play is indicated on the status bar . When a snapshot thumbnail is highlighted, the amount of room remaining on the [...]

For more inf ormation, see Accessories Menu T ab: Using Screen Snapshot and Snapshot and Recording X -Press™ Menu . When you start a scr een snapshot, you will see a message that a waypoint has been cr eated at the point where your cursor is on the scr een, and the screen will freez e while the snapshot is being saved to the MMC/SD card. A status[...]

Highlighting a recording: Y ou can scroll through the whole list of recor ding icons available in the Snapshot and Recording V iew using the 4-WA Y Cursor keys. T he highlighted icon will be surrounded by arrows, and a green pla y triangle will appear to its right. Playing back a recor ding: Highlight a recording icon (using the Up or Do wn 4-W ay [...]

NO TE: Sonar chart speed is increased during Fast F orward and r ever sed during Rewind. This ma y reduce the quality of the sonar image, since at higher speeds, not every sonar r eturn can be processed and displayed. NO TE: Navigation is not affected b y the Sonar Recording featur e, but any active na vigation is cancelled when playback begins or [...]

Side Beam V iew (with optional-purchase QuadraBeam PL US™ transducer only) Side Beam Vie w is only a vailable if you hav e connected a QuadraBeam™ transducer accessory and when T ransducer Select is set to QuadraBeam (see Sonar Menu T ab: T ransducer Select ). This vie w shows sonar information from both the left and right 455 kHz beams and the[...]

Classic layout: T he top portion of the display presents a historical log of sonar returns from the 200 kHz down-looking sonar beam. New information in the do wn beam panel scrolls from right to left. T he bottom portion of the display presents a historical log of sonar returns fr om the 455 kHz right- and left -looking sonar beams. New information[...]

Slanted layout: T his layout presents the two 455 kHz side sonar beams and the 200 kHz down-looking sonar beam as three panels of historical data. T his layout is presented as thr ee slanted panels. New information appears on the right, and scrolls to the left. In all of these layouts, the sonar information fr om the side-looking beams rev eals bot[...]

Bird's Ey e V iew Bird's Eye V iew shows a 3D per spective view of the track and the chart land contour fr om a point above and behind the boat (the eye point). As the boat turns, the eye point mov es to follow the boat. W hen you press the 4-W A Y Cursor key in an y of the Bird’s Eye V iews, the position of the eye point will shift. T [...]

XTE (Cross T rack Error): Distance of Boat from Route 3 Depth 2 Next Waypoint 1 Course: the current direction the boat is traveling measured in degrees from North 5 Bearing: Direction to Destination Waypoint measured in degrees from North 6 Boat Icon 7 Route 8 Off Course Limits 9 Cartography 10 Bird’s Eye V iew (Navigating) Speed: the measurement[...]

Chart/Bird’s Ey e Combo V iew Chart/Bird’s Eye Combo V iew shows both the Chart and Bird’s Eye vie ws in a combination split screen. Y ou can perform any of the functions for either of these vie ws, but only when the view you w ant to control is selected as the active side (see Navigation X -Press™ Menu: Active Side for more inf ormation). [...]

XTE (Cross T rack Error): Distance of Boat from Route 3 Depth 2 Next Waypoint 1 Course: the current direction the boat is traveling measured in degrees from North 5 Bearing: Direction to Destination Waypoint measured in degrees from North 6 Chart Window 7 Cartography 8 3D View Outline 9 Boat Icon 10 Course Projection Line 11 Map Scale 12 Route 13 B[...]

Chart V iew Chart Vie ws - T he standard Chart, Chart No Readouts, and Chart/Chart Combo V iews, as well as the Chart side of the Chart/Bird's Eye Combo V iew and the Chart/Bird's Eye Combo Instrument V iew , all show cartography from the built -in UniMap™ or an optional MMC/SD map for the area surrounding your curr ent position. The cu[...]

Cursor Info Box T rack 1 Latitude and Longitude Position of Cursor 2 Distance to Cursor 3 Bearing to Cursor 4 Depth 5 10 Boat Icon 11 Waypoint 12 Course Projection Line 13 Active Cursor 14 Declutter icons 15 Te m p : Water Surface T emperature 6 Speed: Speed of Boat 7 Course: the current direction the boat is traveling measured in degrees from Nort[...]

XTE (Cross T rack Error): Distance of Boat from Route 3 Depth 2 Next Waypoint 1 Course: the current direction the boat is traveling measured in degrees from North 5 Bearing: Direction to Destination Waypoint measured in degrees from North 6 Tr a c k 7 Declutter Icons 8 Boat Icon 9 Course Projection Line 10 Route 11 Waypoint 12 Cartography 13 Map Sc[...]

Chart/Chart Combo V iew Chart/Chart Combo Vi ew shows two ver sions of the Chart view in a combination split screen, so that you can see the position of the boat on one side while you zoom in or perform other functions on the other . Y ou can perform any of the functions for the Chart view , but only on the side of the view you have selected as the[...]

XTE (Cross T rack Error): Distance of Boat from Route 3 Depth 2 Next Waypoint 1 Course: the current direction the boat is traveling measured in degrees from North 5 Bearing: Direction to Destination Waypoint measured in degrees from North 6 Cartography 7 Off Course Limits 8 Tr a c k 9 Boat Icon 10 Course Projection Line 11 Route 12 Map Scale 13 14 [...]

Chart/Sonar Combo V iew Chart/Sonar Combo V iew shows both the Chart and Sonar vie ws in a combination split screen. Y ou can perform any of the functions for either of these vie ws, but only when the view you w ant to control is selected as the active side (see Sonar X -Press™ Menu: Active Side or Navigation X -Press™ Menu: Active Side for mor[...]

Chart/Side Combo V iew (1197c SI Combo models only) Chart/Side Combo Vie w shows regular chart inf ormation and side imaging sonar information in a combination split screen. Y ou can perform any of the functions for either of these views, but only when the view you want to contr ol is selected as the active side (see Na vigation X -Press™ Menu: A[...]

Chart Orientation All the chart views allow you to choose the orientation of the chart. W hen North-Up orientation is selected, T rue North is shown at the top of the display . In other words, objects located to the north of the boat ar e drawn abov e the boat. When Course-Up orientation is selected, the dir ection of motion of the boat is shown at[...]

NO TE: Y our Chart screen will automatically declutter and simplify as you zoom out. When you zoom out, all waypoint icons that might otherwise o verlap each other will declutter the screen b y changing into very small blue icons, and individual waypoint names will be hidden. W hen you're panning, and your cursor snaps to a w aypoint that is u[...]

Introduction to Na vigation Use the 1100 Series™ to establish waypoints at areas of inter est and to navigate to those wa ypoints via a saveable route (r epresenting the shortest intended distance between w aypoints). Y ou can also view and save tracks, which r epresent the actual path of the boat. W aypoints, Routes and T racks W aypoints are st[...]

Routes link two or more wa ypoints together to create a path for na vigation, and are used in trip planning. Y ou can link individual waypoints together by using the GOT O key . A route represents your intended navigation and shows the shortest path from each w aypoint to the next. As you tr avel a route, sta ying on the route line is the most effi[...]

T o make it easier to select a waypoint, select Sort By and pr ess the RIGHT or LEFT Cursor keys to select a sort order: • Name shows the waypoints alphabetically • Time sho ws the most recently-cr eated waypoint first • Distance shows the closest waypoint fir st. Delete a waypoint: F rom the W aypoints submenu, select Delete and press the RI[...]

Add a W aypoint T arget or T rolling Grid Add or Remove a W aypoint T arget: Fr om the W aypoints submenu (accessed from the Navigation main menu), select T arget and press the RIGHT Cursor k ey to display a list of wa ypoints. Select the waypoint you want to target. A target consisting of concentric cir cles centered on the selected wa ypoint will[...]

Add or Remove a T rolling Grid: F rom the W aypoints submenu (accessed from the Navigation main menu), select Grid and press the RIGHT Cursor ke y to display a list of wa ypoints. Select the waypoint to which you w ant to add the grid. The tr olling grid will appear on all of the navigation views, and can be used as a guide when trolling around a w[...]

Sav e, Edit or Delete a Route Save the curr ent route: W hile you are na vigating, the current route can be sav ed. From the Na vigation X - Press™ Menu, select Save Curr ent Route and press the RIGHT Cursor k ey . Navigation will continue. Display the Routes submenu: From any vie w , press the MENU key twice to display the Main Menu System, then[...]

Edit, Delete or Hide Sav ed T racks Display the T racks Submenu: From an y view , press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor key to select the Na vigation tab. Select T racks and press the RIGHT Cursor key to displa y the T racks submenu. Edit a saved tr ack: From the T racks submenu, select Edit and press t[...]

Activate MOB navigation: Press and hold the GO TO k ey for mor e than 1.5 seconds to activate the Man Overboard (MOB) function. Cancel MOB navigation: From the Na vigation X -Press™ menu, select Cancel MOB and press the RIGHT Cursor key . Canceling MOB navigation removes the r oute and any waypoints cr eated using the GOT O key , but does not rem[...]

T he Menu System The menu system is divided into easy -to-use menu modules. The main components of the menu system ar e: Start-Up Options Menu: Press the MENU key during the power up sequence to vie w the Start-Up Options menu. See Start-Up Options Menu. X-Pr ess™ Menu: The X -Press™ Menu allows you to access the settings that are changed frequ[...]

QUICK TIPS: • When your cursor is within a menu tab, press the EXIT ke y to jump directly to the top of the tab. • If you are at the bottom of a menu tab, press the DOWN Cursor ke y to jump directly to the top of the tab. • If you're at the left or right of a menu tab, y ou can also jump to the other side by pressing the LEFT or RIGHT cu[...]

Setup T ab, Normal User Mode Setup T ab, Advanced User Mode 105[...]

Start -Up Options Menu Press the MENU key when the T itle screen is displayed to access the Start -Up Options menu. Use the UP or DOWN 4-W A Y Cursor keys to position the cursor , then the RIGHT Cursor key to select one of the following choices. If you w ait too long, the system will default to whichev er menu mode happens to be highlighted: • No[...]

Simulator Use the Simulator to learn how to use your 1100 Series™ befor e taking your boat on the water . The Simulator is a very powerful tool that simulates on-the-w ater operation, pro viding a randomly-updated display . W e recommend going through this manual while using the Simulator , since all of the menus function and affect the display t[...]

Self T est Self T est displays results from the internal diagnostic self test, including unit serial number , Printed Circuit Board (PCB) serial number , software revision, total hour s of operation and the input voltage. IP and MA C addresses are also display ed. Accessory T est Accessory T est lists the accessories connected to the system. NO TE:[...]

GPS Diagnostic V iew GPS Diagnostic Vie w , which is only available when a GPS Receiv er is attached to your 1100 Series, shows a sky chart and numerical data from the GPS receiv er . The sky chart shows the location of each visible GPS satellite with its satellite number and a signal strength bar . A dark gray bar indicates that the satellite is b[...]

Sonar X-Pr ess™ Menu The Sonar X -Press™ Menu provides access to the settings most frequently used. Press the MENU ke y once while in any of the Sonar V iews to access the Sonar X -Press™ Menu. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. NO TE: Quad Layout only appears in [...]

Active Side Active Side allows y ou to select which side of a Combo V iew will be active; key pr esses will only affect the active side of the scr een. When a menu is displayed, the non-activ e side of the screen will be gray ed out; at any other time, a green arr ow will point to the active side. Combo V iews usually display sonar on the left, wit[...]

Sensitivity Sensitivity controls how much detail is sho wn on the display . Increasing the sensitivity shows more sonar returns fr om small baitfish and suspended debris in the water; how ever , the display may become too cluttered. W hen operating in very clear w ater or greater depths, increased sensitivity shows weaker r eturns that may be of in[...]

Upper Range (Advanced: Sonar , Split Sonar and Active Sonar Side Views only) Upper Range sets the shallow est depth range that will be display ed on the Sonar , Split Sonar and Active Sonar Side V iews. T he Upper Range menu choice is available when User Mode is set to Adv anced (see Setup Menu T ab: User Mode ) and can only be accessed from the So[...]

Chart Speed Chart Speed determines the speed at which the sonar information moves across the displa y , and consequently the amount of detail shown. A faster speed shows mor e information in the Sonar V iews and is preferred by most angler s; howev er , the sonar information moves across the display quickly . A slower speed keeps the information on[...]

Bottom Range (Sonar Zoom Vie w only, when Bottom Lock is On) Bottom Range allo ws you to control how much of the w ater column, measured up from the bottom, is shown in the Sonar Zoom V iew . Choose a small value to see low-lying bottom structure or details of the bottom return. Choose a larger value to see lar ge structure in deeper water . It is [...]

Side Imaging X-Pr ess™ Menu (1197c SI Combo models only, Side Imaging V iews only) The Side Imaging X-Press™ Menu provides access to the settings most frequently-used. Pr ess the MENU key once while in any of the Sonar V iews to access the Side Imaging X -Press™ Menu. Side Imaging X-Pr ess™ Menu 116[...]

Active Side (1197c SI Combo models only) Active Side allows you to select which side of a Combo V iew will be active; key presses will only aff ect the active side of the screen. W hen a menu is displayed, the non-active side of the scr een will be grayed out; at any other time, a green arro w will point to the active side. Combo V iews usually dis[...]

SI Sensitivity (1197c SI Combo models only) SI Sensitivity contr ols how much detail is shown on the display . Increasing the sensitivity shows more sonar returns from small baitfish and suspended debris in the water; ho wev er , the display may become too cluttered. When oper ating in very clear water or greater depths, incr eased sensitivity show[...]

SI Colors (1197c SI Combo models only) SI Colors allows you to select which color palette you would like to use f or the display . T o change the SI Colors: 1. Highlight SI Colors on the Side Imaging X -Press™menu. 2. Use the LEFT or RIGHT 4-WA Y Cursor Control ke ys to change the color palette. (Inverse, Gr ay , Brown, Blue, Green, Def ault = Bl[...]

Navigation X -Press™ Menu The Navigation X-Pr ess™ Menu provides access to the settings most frequently used. Press the MENU ke y once while in the Bird's Eye View , the Chart or the Chart/Sonar Combo, Chart/Chart Combo V iew , or Chart/Bird’s Eye Combo V iew to access the Navigation X - Press™ Menu. NO TE: Menu choices will vary depen[...]

Active Side Active Side allows you to select which side of a Combo V iew will be active; key pr esses will only affect the active side of the scr een. When a menu is displayed, the non-activ e side of the screen will be gra yed out; at any other time, a green arr ow will point to the active side. Combo V iews usually display sonar on the left, with[...]

The W aypoint Submenu contains the following menu choices: Edit allows you to edit the Name, P osition (Latitude and Longitude) and select the Icon that will be used to represent the wa ypoint in the Chart and Combo V iews. Delete allows you to delete a wa ypoint from the list of sav ed waypoints. T arget allows you to apply a tar get to a waypoint[...]

Clear Current T rack Clear Current T rack allows you to clear the curr ent track being displayed and start a new tr ack at the present position. T o Clear Current T rack: 1. Highlight Clear Current T rack on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Control key to initiate clearing the current tr ack. 3. T he Confirm dialog b[...]

Cancel Navigation (Only when navigating) Cancel Navigation discards the current route and exits Na vigation Mode. This menu choice will only appear when you are currently na vigating a route. T his will not delete a previously -saved route. T o Cancel Navigation: 1. Highlight Cancel Navigation on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-[...]

Remov e Grid (Only if a Grid is active) Remove Grid remo ves the waypoint grid fr om the display . This menu choice will only appear when a grid has already been applied to a waypoint. T o Remove a Grid: 1. Highlight Remove Grid on the Navigation X -Press™ Menu. 2. Use the RIGHT 4-W A Y Cursor Control key to remo ve the grid. Waypoint [Name] (Mos[...]

Snapshot and Recording X -Press™ Menu (Snapshot and Recording V iew only) The Snapshot and Recording X -Press™ menu pro vides access to the image management and sonar recording functions. Press the MENU key once while in the Snapshot and Recording V iew to access the Snapshot and Recording X -Press™ menu. NO TE: For more inf ormation, see Sna[...]

Start Recording (optional-purchase MMC/SD Card, Snapshot and Recording V iew only) Start Recording allows you to start sonar recording from the Snapshot and Recor ding V iew . This menu option is only available when you ha ve an optional-purchase MMC/SD car d installed and you are in Snapshot and Recording V iew . T o start sonar recording: 1. High[...]

Delete All Images (optional-purchase MMC/SD Card, Snapshot and Recor ding Vie w only) Delete All Images allows you to delete all the images at once from the Snapshot and Recor ding V iew . This menu option is only available when you ha ve an optional-purchase MMC/SD car d installed and you are in Snapshot and Recording V iew . T o delete all images[...]

Pings P er Second (optional-purchase MMC/SD Card, Snapshot and Recor ding Vie w only) Pings Per Second allows you to specify the maximum ping rate for the sonar r ecording currently in progress from the Snapshot and Recor ding V iew . This menu option is only av ailable when you hav e an optional-purchase MMC/SD card installed and you ar e in Snaps[...]

Sonar Menu T ab Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor ke y to select the Sonar tab. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode or what tr ansducer is currently selected. Sonar Menu 130[...]

Beam Select Beam Select sets which sonar returns from the transducer will be displayed on the screen. When set to 200/83 kHz , the returns fr om both beams are blended. T he Split Sonar V iew continues to display the sonar returns from each beam in their respectiv e windows. T he blended information is shown in the Sonar V iew . The RTS® W indow i[...]

When Fish ID+™ is turned off , the 1100 Series™ shows only the raw sonar returns on the display . These returns will often result in "arches" f orming on the display , indicating potential targets. Due to the transducer beam angle, the distance to a fish decreases as the fish moves into the beam, and then incr eases as it moves out ag[...]

Real T ime Sonar (RTS®) W indow RTS® W indow sets the RTS® W indow to either Wide or Narro w , or turns it off in the Sonar V iew . The RTS® W indow alwa ys updates at the fastest rate possible and only displays returns that are within the tr ansducer beam. (See Getting Started - Using Y our 1100 Series™: Real Time Sonar [R TS®] Window f or [...]

Bottom V iew Bottom Vie w selects the method used to represent bottom and structure on the display . Structure ID® represents weak returns in blue and str ong returns in red. WhiteLine® highlights the strongest sonar r eturns in white resulting in a distinctive outline. T his has the benefit of clearly defining the bottom on the display . See Bot[...]

455 kHz Sensitivity (Advanced, with optional pur chase QuadraBeam PLUS™ transducer only) 455 kHz Sensitivity adjusts the sensitivity of the 455 kHz beam. Increasing the sensitivity will display additional weak returns and decreasing the sensitivity will displa y few er weak returns. A QuadraBeam PLUS™ transducer must be attached to the F ishing[...]

Surface Clutter (Advanced) Surface Clutter adjusts the filter that remov es surface clutter noise caused by algae and aer ation. The lower the setting, the less surface clutter will be displa yed. T he Surface Clutter menu choice is av ailable when User Mode is set to Advanced (see Setup Menu T ab: User Mode ). T o change the Surface Clutter settin[...]

Max Depth (Advanced) Max Depth adjusts the maximum depth of operation. T he performance of your 1100 Series™ can be tuned to the maximum depth you will be fishing in by setting the Max Depth. W hen a maximum depth is set, your 1100 Series™ will not attempt to acquire sonar data below that depth, thus incr easing over all performance. When Max D[...]

Transducer Select T ransducer Select allows you to select which transducer you w ant to use, High-Definition Sidescan, Compact Sidescan, Sidescan, QuadraBeam PLUS™, DualBeam PL US™, Dual 50/200 kHz, or Universal Sonar 2. NO TE: The transducer setting must corr espond to the transducer type connected to your system. NO TE : If you have pur chase[...]

139 Navigation Menu T ab Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor ke y to select the Navigation tab. NO TE: Menu choices will vary depending on system settings. Navigation Menu[...]

Current T rack Current T rack allo ws you to view the Current T rack submenu. T o view the Current T rack Submenu: 1. Highlight Current T rack on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Control keys to view the Curr ent T rack submenu. The Curr ent T rack Submenu contains the following menu choices: Save Curr ent T rack allows y o[...]

Waypoints W aypoints allows y ou to view the W aypoints submenu. T o view the W aypoints Submenu: 1. Highlight W aypoints on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Control keys to view the W aypoints submenu. The W aypoints Submenu contains the f ollowing menu choices: Create allo ws you to create a ne w waypoint and edit it imme[...]

Routes Routes allows you to view the Routes submenu. T o view the Routes Submenu: 1. Highlight Routes on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Control keys to view the Routes submenu. The Routes Submenu contains the f ollowing menu choices: Create allows y ou to create a new , empty route and add waypoints to it immediately . Ed[...]

North Refer ence North Reference allows you to hav e bearings displayed with one of two orientations: T rue North or Magnetic North. T o change the North Reference setting: 1. Highlight North Reference on the Na vigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to change the North Refer ence setting. (T rue, Magnetic, Default[...]

Track Min Distance (Advanced) T rack Min Distance allows you to set a minimum distance of tr avel bef ore a trackpoint is added to the track. NO TE: T rack Min Distance w orks in conjunction with T rackpoint Interval. Both conditions must be met before a trackpoint is added to the current tr ack. T o change the T rack Minimum Distance setting: 1. M[...]

Course Pr ojection Line Course Projection Line allows you to display or hide an arr ow extending from the bow of the boat that projects y our current course, and sho ws where the boat will go if you continue on your present cour se. T o change the Course Project Line setting: 1. Highlight Course Projection Line on the Na vigation main menu. 2. Use [...]

Continuous Navigation Mode Continuous Navigation Mode allows y ou to continue to navigate and fish around a particular waypoint, e ven if you pass o ver it multiple times. T o activate or de-activate Continuous Navigation: 1. Highlight Continuous Navigation Mode on the Navigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to tu[...]

Chart Menu T ab Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor ke y to select the Chart tab. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. Chart Menu 147[...]

Chart Detail Lev el Chart Detail Level allo ws you to select how much chart detail you w ant displayed on the Navigation V iews. Basic shows land areas, ports, obstructions and r estricted areas. Navigation shows nav aids, landmarks, ferrywa ys and navigation routes in addition to the Basic information. Underwater shows depth contour s, fishing are[...]

Lat/Lon Grid Lat/Lon Grid allows y ou to display or hide a grid showing latitude and longitude lines. T o change the Lat/Lon Grid setting: 1. Highlight Lat/Lon Grid on the Chart main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to change the Lat/Lon Grid setting. (Hidden, V isible, Default = Hidden) Spot Soundings Spot Soundings allo [...]

Chart Select Chart Select allows you to choose what chart to use if you ha ve built - in charts or a map card. If you select A uto, your unit will select a chart automatically . T o activate or de-activate Chart Select: 1. Highlight Chart Select on the Navigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to select which chart [...]

Set Map Offset (Advanced) Set Map Offset allows y ou to change the map offset used by the 1100 Series™. NO TE: The Map Offset will be applied to all maps and not just the map that requir es the correction. The Map Offset should be cleared if a differ ent map is to be used. T o change the Map Offset setting: 1. Activate the cursor and mo ve it loc[...]

Alarms Menu T ab From an y view , press the MENU key twice to access the Main Menu System. The Alarms tab will be the def ault selection. NO TE: When an alarm is triggered, you can silence it by pr essing any key . The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected. Alarms Menu 152[...]

Alarm V olume Alarm V olume allows you to adjust the v olume of the alarms. T o change the Alarm Volume setting: 1. Highlight Alarm V olume on the Alarms main menu. 2. Use the LEFT or RIGHT 4-WA Y Cursor Control ke ys to change the Alarm V olume setting. (Mute, 1 - 10, Default = 5) Depth Alarm Depth Alarm sounds when the depth becomes equal to or l[...]

Low Battery Alarm Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound f or the battery that is connected to the 1100 Series™. The Lo w Battery Alarm should be set to warn you when the battery voltage dr ops below the safety margin that you ha ve determined. For insta[...]

Off Course Alarm Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows y ou to set how far the boat is allowed to mov e off course befor e the Off Course Alarm will sound. T o change the Off Course Alarm setting: 1. Highlight Off Course Alarm on the Alarms main menu. 2.[...]

Drift Alarm Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the siz e of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter , the Drift Alarm will sound. To change the Drift Alarm setting: 1.[...]

Setup Menu T ab From an y view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor ke y until the Setup tab is selected. NO TE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the control head. Setup Menu 157[...]

Sound V olume Sound V olume allo ws you to control the v olume of all sounds emitted by the control head (except for the v olume of the alarms, which is controlled by Alarm V olume Control). T o change the Volume Contr ol setting: 1. Highlight V olume Control on the Setup main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control keys to change the[...]

Units - Speed (with Speed input only) Units - Speed selects the units of measure f or speed-related readouts. T o change the Units - Speed setting: 1. Highlight Units - Speed on the Setup menu. 2. Use the LEFT or RIGHT 4-WA Y Cursor Control k eys to change the Units - Speed setting. (kph [International models only] , mph, kts, Default = kph for Int[...]

Restore Def aults Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution! T o Restore Defaults: 1. Highlight Restore Defaults on the Setup menu. 2. Use the RIGHT 4-W A Y Cursor Control key to initiate restoring def aults. 3. The Confirm dialog box will appear . T o reset the defaults, press the RIGHT [...]

Each readout position can either be empty or contain one of the following: NO TE: Y ou can set a second set of 5 readouts with navigation mode settings as well, so that, when you are navigating, these views contain na vigation data instead of the regular settings. See Navigation X -Press™ menu: Select Nav Readouts f or more inf ormation. NO TE: S[...]

NO TE: When the readout under the w ater column is turned off (as shown in the illustrations), the sonar displa y will expand to fill the screen. T o Select Readouts: 1. Make sure you are in Advanced User Mode, then highlight Select Readouts on the Setup main menu. 2. Use the RIGHT 4-W A Y Cursor Control key to initiate this procedur e. 3. T he Sel[...]

163 Select Nav Readouts (Advanced) Select Nav Readouts sets the individual digital readouts that will be used only during navigation on all non-instrument views. T his feature allows y ou to select what information will be display ed in each of a variable number of fixed-position readouts arranged at the bottom of the scr een on various views, or w[...]

Bearing Bearing is the direction to a destination waypoint measured in degrees from North (i.e. 321°, where 000° is North, 090° East, 180° is South, 270° is West). CMG/SMG Course Made Good/Speed Made Good. Course Made Good is the angle between the starting point on a route and the current position of the boat. The goal is to have CMG and T rac[...]

Depth Offset (Advanced) Depth Offset will adjust the digital depth readout to indicate depth fr om the waterline or boats keel. Enter a positive vertical measurement fr om the transducer to the waterline to r ead the depth from the waterline. Enter a negative vertical measurement fr om the transducer to keel to r ead the depth from the keel. T his [...]

Speed Calibration (Advanced, with Speed paddle wheel only) Speed Calibration will adjust the speed readout b y the percentage entered, and will appear in the menu if a Speed accessory is connected and the paddlewheel has moved at least once, when the unit is in Advanced User Mode (see Setup Menu T ab: User Mode .) T o change the Speed Calibration s[...]

Position F ormat (Advanced) Position F ormat selects the format of the latitude and longitude position display . This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode .) T o change the Position Format setting: 1. Make sure you are in Adv anced User Mode, then highlight Position F ormat on the Setup menu. 2. U[...]

Digits F ormat (Advanced) Digits Format allows you to add a tenth decimal place to r eadouts such as T emperature and Depth. T he format can be changed to small format, large f ormat or no format. T his menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode .) T o change the Digits Format setting: 1. Make sure you [...]

Sonar Sonar deactivates Sonar and removes the Sonar V iews from the view rotation. T o turn Sonar on or off: 1. Highlight Sonar on the Setup menu. 2. Use the LEFT or RIGHT 4-WA Y Cursor Control keys to change the Sonar to On or Off (Off , On, Default = On). Video Out Video Out allo ws you to set the video format that will be sent to your remote mon[...]

Views Menu T ab From an y view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT 4-W A Y Cursor Control key until the V iews tab is selected. This menu tab allo ws you to set the available views to either hidden or visible in the vie w rotation. T he view will be remov ed from the view r otation if it is set to [...]

Accessories Menu T ab From an y view , press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Accessories tab is selected. If no accessories are attached to the Accessory Bus, no accessory menu choices will appear under the Accessories tab, only the Screen Snapshot menu choice. If an accessory is a[...]

Using Screen Snapshot Screen Snapshot activates the screen snapshot function. W hen Screen Snapshot is enabled, pressing the MARK ke y creates a sav ed screen capture on the optional- purchase MMC/SD card installed in your unit’s car d slot. All menus, dialog boxes, warnings and messages are captured and sav ed automatically . Once you have cr ea[...]

2. Press the VIEW key until y ou see the Snapshot and Recording V iew . 3. Y ou can scroll through the whole list of captures in this view using the 4-W AY Cur sor keys. Highlight a thumbnail (using the Up or Down 4-W ay Cursor keys), then use the Right 4-W ay Cursor key to vie w the full image. A border around the full-siz e screen capture indicat[...]

T roubleshooting Before contacting the Humminbird® Customer Resour ce Center , please read the following section. T aking the time to review these tr oubleshooting guidelines may allow y ou to solve a performance problem yourself , and therefore avoid sending y our unit back for repair . 1100 Series™ Doesn’t P ower Up If your 1100 Series™ do[...]

Display Pr oblems Ther e are sever al main conditions or sources of possible interfer ence that may cause problems with the quality of the information displayed on the contr ol head. Look in the following table f or some symptoms of display problems and possible solutions: Problem P ossible Cause The contr ol head loses power at high speeds. When t[...]

Finding the Cause of Noise Electrical noise usually affects the display with many black dots at high speeds, and high sensitivity readings. One or more of the follo wing sources can cause noise or interfer ence: P ossible Source of Noise Isolation Other electronic devices The boat’s engine Cavitation from the boat’s propeller T urn off any near[...]

1- Y ear Limited W arranty W e warrant the original r etail purchaser that products made by Humminbir d® have been manufactur ed free from defects in materials and w orkmanship. This w arranty is effectiv e for one year from the date of original retail purchase. Humminbird® pr oducts found to be defectiv e and covered b y this warranty will be re[...]

Any repairs made after the original w arranty will be warr anted for an additional 90 days after service has been performed by our factory technicians. Y ou can contact our Customer Resource Center or visit our web site to verify the flat rate repair f ee for your pr oduct (visit the Product Support section): http://www .humminbird.com W e reserve [...]

1100 Series™ Fishing System Accessories Accessories customize the 1100 Series™ to your needs and enable you to sta y on the edge of new technology . When an accessory is connected to the 1100 Series™, additional menus and readouts are added automatically to the Main Menu System. Accessories available today that ar e supported by your 1100 Ser[...]

180 Specifications Depth Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500 ft (500 m) Pow er Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500 Watts (RMS); 4000 Watts (Peak- T o-P eak) Operating Fr equency Dual Beam: . . . .[...]

181 Glossary Sonar T erms Alarm, Depth: Depth Alarm is a user -controllable, audible alert that sounds when depth is less than or equal to the setting. Alarm, T emperature: T emperature Alarm is a user -controllable, audible alert that sounds when the water surface temperature equals the setting. Backlight: Backlight is a user-controllable illumina[...]

182 Glossary Sonar T erms Fish Arch: A F ish Arch is the apparent "arch" that appear s on the display when any object mov es through the sonar cone. The ar ch results from a gradual decr ease in distance to an object as it moves into the sonar cone. T he distance to an object changes due to the conical shape of the sonar beam, which cause[...]

183 Glossary Sonar T erms Pixels: Pixels are the "picture elements", or small square blocks, that make up the image on the LCD. Measur ed as a vertical by horizontal number (i.e. 640 V x 320 H), this k ey specification typically indicates the quality of resolution. In fishfinders, the total resolution (vertical multiplied b y horizontal) [...]

184 Glossary Sonar T erms Sensitivity: Sensitivity is a user feature that adjusts the sensitivity of the sonar system to show mor e or less detail in the water . Higher sensitivities are often preferred, how ever , when the water contains debris (silt, storm debris, etc.) and it can be difficult to pick out targets. Conver sely , if sensitivity is [...]

185 Glossary Sonar T erms T otal Screen Update®: A Humminbir d® feature that refr eshes and updates all the sonar information on the display when a range change occurs. Without T otal Screen Update®, only the most recent sonar information would be dra wn to the new range, and the old sonar information w ould continue to scroll off the screen at [...]

186 Glossary GPS and Navigation T erms Acquisition Time: T he length of time that a GPS receiver typically takes to determine a position from at least thr ee satellites. Humminbird® GPS receiver s provide very f ast acquisition times (under one minute), permitting users to get out on the water faster . Alarm, Arrival: T he audible alert that sound[...]

187 Glossary GPS and Navigation T erms Heading: Heading describes the direction the boat is pointing and is measured in degrees (i.e. 321°, wher e 000° is North, 090° East, 180° is South, 270° is W est). Due to wind and waves, the boat is often tr aveling in a slightly differ ent direction than it is heading, and therefor e Heading is often co[...]

188 Glossary GPS and Navigation T erms Time T o Go (TTG): T ime T o Go is the estimated time required to reach the destination waypoint. TTG is calculated using the SOG and DTG. See SOG and DT G . T rack: A T rack is a series of saved points that define the past path of the boat. T hese T rack Points ar e saved at regular time intervals. T racks ar[...]

189 A pp end ix A T ransducer Mounting T emplate: XHS 9 HDSI 180 T Drill Drill Drill Use 5/32” drill bit. T OP PLACE EITHER C ORNER ON DEADRISE ANGLE Rem ove and u se for T ransducer Installation[...]

190 Contact Humminbird® Contact the Humminbird® Customer Resource Center in any of the follo wing ways: By T elephone (Monday - Fr iday 8:00 a.m. to 4:30 p.m. Central Standar d Time): 1-800-633-1468 By e-mail (typically we respond to y our e-mail within three business days): cservice@johnsonoutdoors.com For direct shipping, our addr ess is: Hummi[...]