Ir a la página of
manuales de instrucciones parecidos
-
Laptop
IBM 720/720C
87 páginas 1.14 mb -
Laptop
IBM 147A
91 páginas 2.12 mb -
Laptop
IBM MT 2675
150 páginas 2.95 mb -
Laptop
IBM T30Series
106 páginas 2.12 mb -
Laptop
IBM THINKPAD THINKPAD A30
88 páginas 0.9 mb -
Laptop
IBM MT 2632
106 páginas 1.7 mb -
Laptop
IBM 441
210 páginas 12.57 mb -
Laptop
IBM 67P4580
8 páginas 0.31 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones IBM 143C. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica IBM 143C o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual IBM 143C se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales IBM 143C, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones IBM 143C debe contener:
- información acerca de las especificaciones técnicas del dispositivo IBM 143C
- nombre de fabricante y año de fabricación del dispositivo IBM 143C
- condiciones de uso, configuración y mantenimiento del dispositivo IBM 143C
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de IBM 143C no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de IBM 143C y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico IBM en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de IBM 143C, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo IBM 143C, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual IBM 143C. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
S37L-5192-00 IBM Mobile Systems ThinkPad i Series 1400 (2611) This Manual Supports The Following Models: 1412, 1419, 1452, 1456, 1459, 1472, 1476, 1479, 140A, 140C, 140F, 140H, 140K, 140L, 140M, 140T, 143C, 143H, 143K, 143L, 143M, 143T, 147A, 147F, 147A, 149C, 149F, 149H, 149K, 149M, 149T, Hardware Maintenance Manual May 1998[...]
-
Página 2
Before using this information and the product it supports, be sure to read the general information under “Read This First” on page 1. First Edition (May 1999) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPO- RATION PROVIDES T[...]
-
Página 3
Contents ThinkPad i Series 1400 Hardware Maintenance Manual . . . . . . . . . . . . . . . . . . . . . 1 Read This First .................. 1 How to Use Error Messages .......... 1 How to Diagnose Multiple FRUs ........ 1 What to Do First ................ 2 Screw Notices . . . . . . . . . . . . . . . . . 3 Power-On and Setup Password .......... 4 Ch[...]
-
Página 4
Battery Assembly . . . . . . . . . . . . . . . 36 DIMM and DIMM Cover ............ 3 7 Modem Board Cover and Modem Board .... 3 8 Keyboard . . . . . . . . . . . . . . . . . . . 39 CPU Thermal Plate .............. 4 1 RTC Battery, CPU EMI Shield and Hard Disk Drive 42 PCMCIA Holder . . . . . . . . . . . . . . . . 44 LCD Assembly ................. 4 [...]
-
Página 5
ThinkPad i Series 1400 Hardware Maintenance Manual Read This First Before you go to the check procedures, be sure to read this section. Important Notes Only certified trained personnel should service the computer. Read the FRU service procedures before replacing any FRUs. Be extremely careful during write operations such as copying, sav[...]
-
Página 6
What to Do First The servicer must include the following in the parts exchange form or parts return form that is attached to the returned FRU: 1. Name and phone number of servicer. 2. Date of service. 3. Date when part failed. 4. Date of purchase. 5. Failure symptoms, error codes appearing on display, and beep symptoms. 6. Procedure index and page [...]
-
Página 7
If the following symptoms are present, they may indicate damage caused by non-warranted activity: Missing parts may be a symptom of unauthorized service or modification. HDD spindles can become noisy if subjected to excessive force or by being dropped. Screw Notices The computer uses special nylon-coated screws with the following characteri[...]
-
Página 8
Power-On and Setup Password To clear a password from the system, first identify the system password switch by referring to “Switch Locations” on page 74, then follow these steps: 1. Turn off the computer. 2. Unplug the AC Adapter and remove the battery. 3. Remove the keyboard by referring to “Keyboard” on page 39, and the thermal plate by r[...]
-
Página 9
Check Procedures Use the following procedure as a guide for computer prob- lems. Notes: 1. The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or mod- ified options can give false errors and invalid system responses. 2. Some test items require tools as shown below: Audio wrap cable (P/N: 65G5180) [...]
-
Página 10
Symptoms (Verified) Go to Other symptoms Appropriate check instructions in this section, then use appropriate tables in “Symptom-to-FRU Index” on page 17. Power Systems Check To verify the symptom of the problem, power on the com- puter using each of the power sources as follows: 1. Remove the battery pack, diskette drive, and hard disk drive. [...]
-
Página 11
If the measured voltage is correct, replace the planar board. If the problems still persist, go to “Undetermined Problems” on page 25. If the voltage is not correct, go to the next step. 2. Unplug the AC Adapter cable from the AC power outlet and wait for five minutes or longer to allow the over-voltage protection circuit of the AC [...]
-
Página 12
Note: Signal lines, not used in these steps, are used for communication between the system and the battery. 3. If the voltage is less than +8 V dc, recharge the battery pack. If the voltage is still less than +8 V dc after recharging, replace the battery. Terminal Signal / Voltage (V dc) 4 Reserved 5 Thermal 6 Sense 7 Ground Planar Board Check The [...]
-
Página 13
CAUTION: This system cannot work without DIMM memory. Memory errors might stop system operation, show error messages on the screen, or hang the system. Use the following procedure to isolate memory problems: Note: Make sure that the DIMM is properly installed into the connector. A loose connection can cause an error. 1. Power off the computer and r[...]
-
Página 14
Replace the planar board. The following external input devices are supported for this computer: Numeric keypad Mouse (PS/2 compatible) Keyboard If any of these devices do not work, reconnect the cable connector and repeat the failing operation. If the problem still exists, replace the device, and then the planar board. Audio Functio[...]
-
Página 15
If either the pointing stick or the click button does not work, do the following actions one a time to correct the problem. Do not replace a non-defective FRU. 1. Reconnect the keyboard flexible cables and the TrackPoint flexible cable. 2. Replace the TrackPoint board. 3. Replace the keyboard. 4. Replace the planar board. Diskette Drive Check Do th[...]
-
Página 16
If an error occurs, reconnect the connector on the planar board. If the error still remains: 1. Reconnect the CD-ROM/DVD-ROM drive cable. 2. Replace the CD-ROM/DVD-ROM drive cable. 3. Replace the CD-ROM/DVD-ROM drive. 4. Replace the planar board. Modem Board Check Do the following to isolate the problem to the system internal modem: 1. Boot from th[...]
-
Página 17
BIOS Utility Your computer has a BIOS Utility that allows you to con- figure the computer an its hardware settings. Note: The computer is also bundled with a Windows- based computer management utility similar in func- tion with the BIOS Utility called the Notebook manager. The computer is already correctly configured for you. If you make any change[...]
-
Página 18
Navigating the BIOS Utility Keep in mind the following when using the BIOS Utility: From the main menu screen, press the up or down arrow keys to move from one menu item to another; then press Enter to enter the selected menu. Parameters displayed in low brightness (grayed out) are not user-configurable. The computer detects and sets the va[...]
-
Página 19
Power Management Features Two power management modes are available in the com- puter system to reduce power consumption and to prolong battery life. Screen Blanking Mode When in screen blanking mode, the following occurs: The LCD backlight turns off. Events that cause the computer to enter screen blanking mode: Screen blanking requested by [...]
-
Página 20
Note: If the computer enters standby mode and the com- puter is using a communication or I/O PC Card, the PC Card and application program remain active. Hibernation Mode When in hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The system is powered off. Events that cause the c[...]
-
Página 21
Symptom-to-FRU Index The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the FRU/Action columns. If a FRU does not solve the problem, put the original part back in the computer. Do not replace a non- defective FRU[...]
-
Página 22
Error Code Message FRU/Action in Sequence 050 IDE Drive 0 Error Hard disk connection board Hard disk drive Planar board 054 IDE Drive(s) Disabled Hard disk drive cable Hard disk drive 056 IDE Drive 0 Auto Detection Failed Hard disk connection board Hard disk drive Planar board 070 Real Time Clock Error Reset time[...]
-
Página 23
Beep Symptoms Symptom/Error FRU/Action in Sequence Five short beeps, power-on indicator turns on then off and LCD is blank. Ensure that "System Boot Drive" in the "System Secu- rity" menu of the BIOS Utility is not set to Drive A“. Battery Four short beeps every minute and system doesn't enter hibernation mode. ?[...]
-
Página 24
Symptom/Error FRU/Action in Sequence No beep, power-on indicator turns on and LCD is blank. But you can see POST on an external CRT. Reconnect the LCD connec- tors. LCD inverter ID LCD LVDS board (for 14.1–inch LCD) LCD FPC cable LCD inverter LCD Planar board No beep, power-on indicator turns on and a blinking cursor s[...]
-
Página 25
Symptom/Error FRU/Action in Sequence No beep, power-on indicator turns on and LCD is blank. Power source (battery and adapter). See “Power Systems Check” on page 6. Reconnect the LCD connector Charger board CPU board Hard disk drive LCD inverter ID LCD LVDS board (for 14.1–inch LCD) LCD FPC cable Inverter ?[...]
-
Página 26
Indicator-Related Symptoms Symptom/Error FRU/Action in Sequence Indicator incorrectly remains off or on, but system runs cor- rectly. Reconnect the indicator board connector. Indicator board Power-Related Symptoms Symptom/Error FRU/Action in Sequence Power shuts down during operation. Go to “Power Systems Check” on page 6. AC Ad[...]
-
Página 27
Audio-Related Symptoms Symptom/Error FRU/Action in Sequence Internal speakers make noise or emit no sound. Speaker volume control Go to “Audio Function Check” on page 10. External speakers make noise or emit no sound. Speaker volume control Go to “Audio Function Check” on page 10. In DOS or Windows, multimedia programs, no s[...]
-
Página 28
Symptom/Error FRU/Action in Sequence Battery fuel-gauge doesn't go higher than 90%. Remove battery pack and let it cool for 2 hours. Refresh battery (continue using battery until power off, then charge the battery). Battery pack Charger board Planar board System configuration does not match the installed devices. Enter [...]
-
Página 29
Modem-Related Symptoms Symptom/Error FRU/Action in Sequence Internal modem does not work correctly Go to “Modem Board Check” on page 12. Modem connector Modem board Planar board Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as co[...]
-
Página 30
7. If the problem remains, replace the following FRUs one at a time. Do not replace a non-defective FRU. TrackPoint board Charger board Audio & battery function connection board LCD assembly Planar board 26 ThinkPad i Series 1400[...]
-
Página 31
Related Service Procedures This section provides information about the following: “Flash Memory Update” “Status Indicators” “Power Switch” on page 29 “Diagnostic Program Diskette” on page 29 “Maintenance Program Diskette” on page 30 “Fn Key Combinations” on page 32 Flash Memory Update The BIOS Utility[...]
-
Página 32
Symbol Color Meaning (1) Battery status Green Enough battery power remains for operation. Blinking orange The battery pack needs to be charged Orange The battery pack is being charged. (2) Standby mode Green The computer is in standby mode. Blinking green The computer is entering or resuming from hibernation mode. (3) Drive in use Orange Data is be[...]
-
Página 33
Power Switch If the computer cannot be turned off by pressing the power switch, try pressing it for more than 4 seconds to force the system to shutdown. Diagnostic Program Diskette The Diagnostic Program Diskette (P/N: 09N1020) contains the PC Doctor diagnostics program. To use PC Doctor, some test items require some test tools as listed below: [...]
-
Página 34
2. Press the up and down arrow keys to move in a selected menu; then press Enter to enable the high- lighted option. Note: You can press F1 for help. Maintenance Program Diskette The Maintenance Program Diskette (P/N: 09N1025) pro- vides the three following functions: “Setting the LCD Panel ID” “Setting the Thermal Sensor” on page 3[...]
-
Página 35
Note: If the LCD has no display after changing the ID code, make sure you write the correct ID code or try reconnecting the LCD FPC cable connectors. Setting the Thermal Sensor: The system is equipped with sensors to protect against system over- heating. By setting the system and processor thermal thresholds, the system can turn on the cooling Fan [...]
-
Página 36
Fn Key Combinations The following table shows the Fn key and function key combinations and their corresponding functions. The Fn key works independently of the operating system. The operating system obtains the status through the system management interface to control the system. Fn + Result F1 The ShortCut Keys Utility program appears. The ShortCu[...]
-
Página 37
Product Overview The following shows an overview of the system features. Feature Description Processor Intel** Mobile Pentium** processor 366 MHz –or– Intel** Mobile Celeron** processor 366 MHz Bus architecture PCI System memory 32MB or 64MB DIMM card, maximum 128MB (144–pin SDRAM) CMOS RAM 256KB Video 12.1–inch, 65,536 colors, 800x600 pixe[...]
-
Página 38
FRU Removals and Replacements This section contains information about removals and replacements. Do not damage any parts. Only certified and trained personnel should service the computer. The arrows in this section show the direction of move- ment to remove a FRU, or to turn a screw to release the FRU. The arrows are marked in numeric order[...]
-
Página 39
Before FRU Removals and Replacements Screw Type Example Explanation Note: Some screws have nylock paste (on the grooves) for better friction and increased stability. Some screws have bracket supports. FPC Cable Connector Type Unplugging the Cable: To unplug the cable, first unlock the connector by pulling up the two clasps on both sides of the conn[...]
-
Página 40
Battery Assembly 1 2 3 Reverse the steps described above when installing a new battery pack. 36 ThinkPad i Series 1400[...]
-
Página 41
DIMM and DIMM Cover 1 2 3 4 To install the DIMM: With the notched end of the DIMM toward the right side of the socket, insert the DIMM, at an angle of approximately 20°, into the socket; then press it firmly. Pivot the DIMM until it snaps into place. 1 2 Side View 1 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 5L (2) Bind head, bla[...]
-
Página 42
Modem Board Cover and Modem Board 1 3 2 To remove the modem board: Disconnect the modem cable (4); then press the release latches on both sides of the modem board (5), and pull out the modem board (6). 5 6 4 Step Size (Quan- tity) Head & Color Torque Memo 2 M2 x 5L (2) Bind head, black 1.6kgf-cm Note: The screws do not separate from the modem b[...]
-
Página 43
Keyboard “Battery Assembly” on page 36 1 2 Note: Be careful not to scratch the surface of the name plate cover. 3 Step Size (Quan- tity) Head & Color Torque Memo 3 M2 x 4L (2) Pan head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 39[...]
-
Página 44
4 5 6 8 7 When replacing the keyboard, make sure that the 3 cables are clean and insert them directly into the connectors, making sure they contact with the bottom of the connector. Now press down on the latch of the connector to secure. Note: If the cables do not touch the bottom of the con- nector, the keyboard function will be rendered useless. [...]
-
Página 45
CPU Thermal Plate “Battery Assembly” on page 36 “Keyboard” on page 39 1 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (3) Bind head, black 3.2 kgf-cm w/ nylock paste Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 41[...]
-
Página 46
RTC Battery, CPU EMI Shield and Hard Disk Drive “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 2 1 4 3 Safety Notice 4 The backup battery (1) is a lithium battery and can cause a fire, an explosion, or severe burns. Do not recharge it, remove its polarized connector, disassemble it, heat i[...]
-
Página 47
Reverse the steps described above when installing a new hard disk drive. CAUTION: Do not apply any shock to the hard disk drive. The hard disk drive is sensitive to physical shock. Incor- rect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk dirve, the user must have a backup copy of all the infor[...]
-
Página 48
PCMCIA Holder “Battery Assembly” on page 36 “Modem Board Cover and Modem Board” on page 38 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 1 Note: Before removing and replacing the PCMCIA holder, make sure that the PCMCIA cards are removed and the eject levers are not sticking out. 3 2 Attention: When removing t[...]
-
Página 49
LCD Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 2 1 1 3 5 4 8 6 7 Note: For 14.1–inch LCD models, a LVDS board is addi- tionally installed as shown at 3. Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 13.5L (2) Pan head, black 3.5 kgf-cm w/ nylock paste Note: Ma[...]
-
Página 50
Step Size (Quan- tity) Head & Color Torque Memo 3 M2 x 14L (2) (for 12.1-inch LCD assembly) Pan head, silver 1.6 kgf-cm M2 x 20L (2) (for 14.1-inch LCD assembly) Pan head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. 46 ThinkPad i Series 1400[...]
-
Página 51
Upper Cover (Keyboard Bezel) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 4 3 2 5 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 13.5L (5) Pan head, black 3.2 kgf-cm w/ [...]
-
Página 52
6 Note: The upper cover has several latches. When removing the upper cover from the base cover, gently release these latches, then raise the side of the upper cover facing the palm rest to remove it. Be careful not to break the latches. Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 6L (1) Pan head, black 3.2 kgf-cm w/ nylock paste No[...]
-
Página 53
CD Control Card “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 3 5 6 4 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 4L [...]
-
Página 54
Trajection Board and Modem Connector (RJ11 Cable Assembly) “Battery Assembly” on page 36 “Modem Board Cover and Modem Board” on page 38 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboa[...]
-
Página 55
DC/DC Charger “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 1 2 ThinkPad i Series 1400 51[...]
-
Página 56
Audio PCB and S-Video PCB “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 4 3 2 1 Step Size (Quan- tity) Head & Color Torque Memo 3 M2[...]
-
Página 57
Audio Cable and Speaker Cable “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 3 2 3 1 1 Step Size (Quan- tity) Head & Color Torque Mem[...]
-
Página 58
To install the speaker cable: When re-inserting the speaker cable, one end is connected to the Audio Con- nector Board underneath the palm rest. You then align the cable, following the border of the chassis and connect it to the inverter cable as shown in the diagram. 54 ThinkPad i Series 1400[...]
-
Página 59
Audio Connector Board “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L [...]
-
Página 60
Fan Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 3 2 1 4 Step Size (Quan- tity) Head & Color Torque Memo 2 M2.5 x 6L (2) B[...]
-
Página 61
Diskette and CD-ROM/DVD-ROM Drives Assembly “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 2 1 5 4 3 Attention: You must pull out the C[...]
-
Página 62
CD-ROM/DVD-ROM-drive-emergency-eject hole to open the CD/DVD tray. CD-ROM/DVD-ROM Module 3 2 1 1 CAUTION: Do not diassemble the CD-ROM/DVD-ROM; there is no user adjustments or serviceable parts inside. The use of controls, adjustments or performing procedures other than those specified may result in hazardous radiation exposure. Do not apply any ex[...]
-
Página 63
Diskette Drive (FDD with Bezel) 6 4 5 7 4 Step Size (Quan- tity) Head & Color Torque Memo 4 M2.5 x 3.5L (4) Bind head, black 1.6 kgf-cm w/ nylock paste Note: Make sure you use the correct screw for replacement. ThinkPad i Series 1400 59[...]
-
Página 64
Planar Board “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “Upper Cover (Keyboard Bezel)” on page 47 2 1 4 3 Notes: 1. When removing the planar board from the base cover, gently [...]
-
Página 65
LCD Front Cover (12.1-inch) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 2 3 4 3 Note: When removing the LCD, take note of the following: 1. Be careful not to scratch the LCD cover wh[...]
-
Página 66
2. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches. 3. Gently push the two hooks (3) outward to remove the LCD front cover. Speakers “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI S[...]
-
Página 67
1 3 2 4 5 Note: There are adhesive tape attached to the micro- phone cable assembly. Do not forget to put them back when reinstalling. LCD Panel, LCD Cable and Inverter “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 ?[...]
-
Página 68
1 2 4 1 3 7 8 5 6 Attention: After you replace the LCD or inverter, follow the instructions in “Setting the LCD Panel ID” on page 30. Step Size (Quan- tity) Head & Color Torque Memo 1 M3 x 5L (2) (LCD) Bind head, black 3.2 kgf-cm M2 x 4L (2) (Inverter) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. 64[...]
-
Página 69
Hinge “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “LCD Front Cover (12.1-inch)” on page 61 2 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (2) Bind head, [...]
-
Página 70
LCD Front Cover (14.1-inch) “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 1 2 3 3 4 Note: When removing the LCD, take note of the following: 1. Be careful not to scratch the LCD cover wh[...]
-
Página 71
2. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches. 3. Gently push the two hooks (3) outward to remove the LCD front cover. Speakers “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI S[...]
-
Página 72
1 3 2 5 4 Note: There are adhesive tape attached to the micro- phone cable assembly. Do not forget to put them back when reinstalling. LCD Panel, LCD Cable and Inverter “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 ?[...]
-
Página 73
1 2 1 3 4 5 6 7 8 Attention: After you replace the LCD or inverter, follow the instructions in “Setting the LCD Panel ID” on page 30. Step Size (Quan- tity) Head & Color Torque Memo 1 M3 x 5L (2) (LCD) Bind head, black 3.2 kgf-cm M2 x 4L (2) (Inverter) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. Th[...]
-
Página 74
2 2 1 Step Size (Quan- tity) Head & Color Torque Memo 1 M2 x 4L (4) Pan head, silver 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. 70 ThinkPad i Series 1400[...]
-
Página 75
Hinge “Battery Assembly” on page 36 “Keyboard” on page 39 “CPU Thermal Plate” on page 41 “RTC Battery, CPU EMI Shield and Hard Disk Drive” on page 42 “LCD Assembly” on page 45 “LCD Front Cover (12.1-inch)” on page 61 1 2 2 Step Size (Quan- tity) Head & Color Torque Memo 1 M2.5 x 6L (2) Bind head, [...]
-
Página 76
Locations Front View 1. LCD latches 2. LCD 3. Speakers 4. Indicator panel 5. Internal modem port 6. PC Card slots 7. PC Card eject buttons 8. Diskette drive 9. Diskette-drive-activity indicator 10. Diskette eject button 11. CD-ROM/DVD-ROM drive 12. CD-ROM/DVD-ROM eject button 13. CD-ROM/DVD-ROM-drive-activity indicator 14. CD-ROM/DVD-ROM-drive-emer[...]
-
Página 77
24. Fn key 25. Built-in microphone Bottom View 1. Battery-pack latch 2. Tilt feet 3. Memory slot door Rear View 3 4 5 6 7 8 9 10 11 12 13 14 15 2 1 1. Power jack 2. Universal serial bus (USB) connector 3. External-input-device (PS/2) connector 4. Serial connector 5. Parallel connector 6. Expansion connector 7. External monitor connector 8. Security[...]
-
Página 78
13. Audio volume control 14. Battery pack Switch Locations There are two switches found on the system board. Refer to the tables below on how to set these switches. Note: There is no switch to set the CPU voltage and speed. The CPU board can sense the correct working voltage and speed itself. Keyboard Language (SW3, Switch 1, 2 and 3) Setting Passw[...]
-
Página 79
System Unit Parts Listing 1 2 3 4 5 32 6 7 28 29 30 31 8 22 23 24 25 25-1 26 27 13 12 11 10 9 ThinkPad i Series 1400 75[...]
-
Página 80
21-1 21 20 19 18 14 15 16 17 No. Description FRU No. Qty. 1 NAMEPLATE COVER ASM 10L1961 1 2 HEATSINK CPU 05K6236 1 3 PCMCIA HOLDER 05K5476 1 4 HDD MODULE ASSY 6.4 GB 05K9116 1 HDD MODULE ASSY 4.8 GB 05K9115 1 5 KITTING, HDD 05K5677 1 6 CD CONTROL CARD 10L1170 1 7 TRACKPOINT BOARD 10L1317 1 8 CD ROM CHASSIS 05K5678 1 9 FPC DVD 27L0468 1 FPC CD ROM 0[...]
-
Página 81
No. Description FRU No. Qty. DIMM 64MB 10L1227 1 20 LI-ION BATTERY ASM (9 CELLS) 02K6577 1 21 BOTTOM CASE (W/ TV OUT) 05K6239 1 BOTTOM CASE (W/O TV OUT) 27L6572 1 21-1 LEG (L,R) 05K5953 1 22 RTC BATTERY 11J8591 1 23 AUDIO PCB (FOR LI-ION) 10L1316 1 24 FAN ASM 27L6475 1 25 S TERMINAL BOARD ASM 10L1286 1 25–1 S-VIDEO BRACKET 27L6476 1 26 DC/DC CHAR[...]
-
Página 82
No. Description FRU No. Qty. KEYBOARD (API – 1ST SOURCE) KEYBOARD (US) 02K6368 1 KEYBOARD (JAPAN) 02K6382 1 KEYBOARD (GERMANY) 02K6370 1 KEYBOARD (TRADITIONAL CHINESE) 02K6383 1 KEYBOARD (DANISH) 02K6376 1 KEYBOARD (FRANCE) 02K6372 1 KEYBOARD (KOREA) 02K6384 1 KEYBOARD (UK) 02K6371 1 KEYBOARD (CANADIAN FRENCH) 02K6369 1 KEYBOARD (NORWEGIAN) 02K63[...]
-
Página 83
LCD Unit Parts Listing 12.1" LCD Unit Parts Listing 2 1 3-1 3 4 9 5-1 7 5 6 8 No. Description FRU No. Qty. 1 LCD BEZEL ASM 12.1" 05K5674 1 2 SPEAKER ASM (R,L) 05K2827 1 3 HINGE (R,L) 05K5669 1 3-1 HINGE COVER (R,L) 05K5949 1 4 12.1" TFT LCD (SANYO) 05K9528 1 5 FPC 12.1" ASSY 27L0477 1 5–1 LCD FPC HOLDER KIT 27L6477 1 ThinkPad [...]
-
Página 84
No. Description FRU No. Qty. 6 LCD INVERTER 12.1" 10L1380 1 7 LED BD 10L1168 1 8 LCD REAR COVER ASM 12.1" TFT 05K6303 1 9 CABLE ASSEMBLY 05K2798 1 LG/IBM LOGO KIT 05K6044 1 80 ThinkPad i Series 1400[...]
-
Página 85
14.1" LCD Unit Parts Listing 3 2 1 3-1 4 9 10 9 5-1 11 12 5 6 7 8 No. Description FRU No. Qty. 1 LCD BEZEL ASM 14.1" 05K6232 1 2 SPEAKER ASM (R,L) FOR 14.1" 02K6299 1 3 HINGE (R,L) FOR 14.1" 05K6234 1 3-1 HINGE COVER (R,L) 05K5949 1 4 14.1" TFT LCD (LG) 05K9396 1 14.1" TFT LCD (IBM) 05K9538 1 5 FPC 14.1" ASSY 05K2[...]
-
Página 86
No. Description FRU No. Qty. 5–1 LCD FPC HOLDER KIT 27L6477 1 6 LCD INVERTER 14.1" 10L1383 1 7 LED BD 14.1" 10L1315 1 8 LCD REAR COVER ASM 14.1" TFT 05K6231 1 9 14.1" TFT BRACKET (R,L) 05K6233 1 10 CABLE ASSEMBLY 05K2798 1 11 LVDS COVER 05K5960 1 12 LVDS BOARD 10L1318 1 LG/IBM LOGO KIT FOR 14.1" BEZEL 05K6310 1 82 ThinkPa[...]
-
Página 87
Miscellaneous Parts Description FRU No. Qty. KITTING PACK FOR RUBBER RUBBER FOOT-F LCD SIDE SCREW CAP LCD BLIND CAP 05K5954 POINTING STICK CAP 84G6536 PORT REPLICATOR 05K5594 MYLAR PACK 05K6040 SCREW KIT SCREW MACH PAN M2*14L NI SCREW MACH PAN M2*4L NI SCREW WAFER NYLO M2.5*6L B-ZN SCREW M3*5L 700 SCREW M2.5*L 13.5 STEEL SCREW MACH PAN M2*20L NI SC[...]
-
Página 88
Telephone/Modem Description FRU No. Qty. MODEM CABLE (GERMAN) 27L0441 MODEM CABLE (UK, NZ) 27L0442 MODEM CABLE (FRANCE) 27L0443 MODEM CABLE (HOLLAND) 27L0444 MODEM CABLE (SWEDEN) 27L0445 MODEM CABLE (NORWAY/FIN) 27L0446 MODEM CABLE (DANISH) 27L0447 MODEM CABLE (ITALY) 27L0448 MODEM CABLE (AUSTRIA) 27L0449 MODEM CABLE (SPAIN) 27L0450 MODEM CABLE (BE[...]
-
Página 89
Power Cord Description FRU No. Qty. US/CANADA/TAIWAN 76H3516 EUROPE 76H3518 UK 76H3524 ITALY 76H3530 SWITZERLAND 76H3528 JAPAN 13H5273 CHINA 02K0539 KOREA 76H3535 AUSTRALIA/NEW ZEALAND 76H3514 ThinkPad i Series 1400 85[...]
-
Página 90
Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any refer- ence to an IBM product, program, or service is not intended to state or imply that only IBM product, program, or service may be used. Subject to IBM's valid intel[...]
-
Página 91
IBM Part Number: 37L5192 Printed in U.S.A. S37L-5192-ðð[...]