IBM 2626 manual

S10L-9626-00 IBM Mobile Systems ThinkPad 390/i Series 1700 (2626, 2627) Hardware Maintenance Manual November 1998[...]

Before using this information and the product it supports, be sure to read the general information under “Read This First” on page 19. First Edition (November 1998) The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPO- RATION PROV[...]

Related Publications The following product publications are available through IBM or your IBM Authorized Dealer. Publication Part, Form Number Mobile Systems HMM Volume 1: Laptop, Note- book, Portable, and ThinkPad Computers (Models L40, CL57, N45, N51, P70/P75, ThinkPad 300, 350, 500, 510, 710T, Expansion Unit, Dock I, Dock II) 30H2356, S82G-1501-[...]

Related Diskettes The following diskettes are available through IBM or your IBM Authorized Dealer. Diskette Part, Form Number ThinkPad 300 (2615) Advanced Diagnostics Diskette 33G9361, S33G-9361 ThinkPad 350, 350C, 425, 425C (2618) Advanced Diagnostics Diskette A211000, GA21-1000 ThinkPad 365 (2625) Advanced Diagnostics Diskette 76H7578, S30H-2498 [...]

Contents Introduction . . . . . . . . . . . . . . . . . . . 1 Important Service Information ........... 1 How to Use Error Messages .......... 2 How to Read POST Error Messages ...... 2 Drive and Diskette Compatibility Matrix ....... 3 Safety Notices (Multi-lingual Translations) ..... 4 Safety Information . . . . . . . . . . . . . . . . 11 General [...]

Writing the VPD Data ............. 4 1 Flash UUID . . . . . . . . . . . . . . . . . . 42 Running the Diagnostics .............. 4 2 PQA System Diagnostics ............ 4 2 Audio Resource and Speaker-out Test ..... 4 5 PCMCIA WrapCard Test ............ 4 6 Modem Dial and Data Transfer Test ...... 4 6 FIR Data Transfer Test ............. 4 6 USB Conn[...]

LCD FPC ASM 12.1" .............. 8 1 Switch Location . . . . . . . . . . . . . . . . 82 System Unit Parts Listing ............. 8 3 LCD Unit Parts Listing ............... 8 8 12.1" LCD ASM Parts Listing .......... 8 8 13.3" LCD ASM Parts Listing .......... 8 9 14.1" LCD ASM Parts Listing .......... 9 0 Notices . . . . . . . . . [...]

viii ThinkPad 390/i Series 1700[...]

Introduction Important Service Information Important Diskette fixes are customer installable. The diskette fixes are located on the PC Company Bulletin Board Service (BBS). The direct phone line for modem con- nection is 919-557-0001 or tieline 255-0001. Advise customers to contact the PC Company HelpCenter at 800-772-2227 if they need assistance i[...]

Attention A customized setup configuration (other than default settings) may exist on the computer you are servicing. Running Automatic Configuration may alter those set- tings. Note the current configuration settings (using the View Configuration option) and verify that the set- tings are in place when service is complete. Hard Disk Drive Replacem[...]

Drive and Diskette Compatibility Matrix The following table provides identification information for 3.5-inch drives. Diskette Drive Identifying Mark 3.5-Inch - 1.44MB 1.44 on the eject button 3.5-Inch - 2.88MB 2.88 on the eject button The following table provides compatibility information for 3.5-inch diskettes and 3.5-inch diskette drives. The fol[...]

Safety Notices (Multi-lingual Translations) In this manual, safety notices appear in English with a page number reference to the appropriate multi-lingual, translated safety notice found in this section. The following safety notices are provided in English, French, German, Italian, and Spanish languages. Safety Notice 1 Before the computer is power[...]

Safety Notice 2 Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble it, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regu- lations. Use only the battery in the appropriate parts listing. Use of an incorrect battery can result in ignition [...]

Safety Notice 3 The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack. Use of an incorrect battery can result in ignit[...]

Safety Notice 4 The lithium battery can cause a fire, explosion, or severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts [...]

Safety Notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing. Si le panneau d'affichage à cristaux liquides se brise et que vous recevez dans les yeux o[...]

Safety Notice 6 To avoid shock, do not remove the plastic cover that surrounds the lower portion of the inverter card. Afin d'éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d'alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der [...]

Safety Notice 8 Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d'alimentation des socles de prise de courant[...]

Safety Information The following section contains the safety information that you need to be familiar with before servicing an IBM mobile computer. General Safety Follow these rules to ensure general safety:  Observe good housekeeping in the area of the machines during and after maintenance.  When lifting any heavy object: 1. Ensure you can s[...]

Electrical Safety Observe the following rules when working on electrical equipment. Important Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live elec- trical currents. Many customers have, near their equipment, rubber floor mats that contain small c[...]

 Regularly inspect and maintain your electrical hand tools for safe operational condition.  Do not use worn or broken tools and testers.  Never assume that power has been disconnected from a circuit. First, check that it has been powered-off.  Always look carefully for possible hazards in your work area. Examples of these hazards are mo[...]

The guide consists of a series of steps presented in a checklist. Begin the checks with the power off, and the power cord disconnected. Checklist: 1. Check exterior covers for damage (loose, broken, or sharp edges). 2. Power-off the computer. Disconnect the power cord. 3. Check the power cord for: a. A third-wire ground connector in good condition.[...]

Handling Electrostatic Discharge-Sensitive Devices Any computer part containing transistors or integrated cir- cuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the [...]

Laser Compliance Statement Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive. CD-ROM drives are also sold separately as options. The CD-ROM drive is a laser product. The CD-ROM drive is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations[...]

El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí especificados puede provocar la exposición a radiaciones peligrosas. Opening the CD-ROM drive could result in exposure to hazardous laser radiation. There are no serviceable parts inside the CD-ROM drive. Do not open. Some CD-ROM drives contain an embedded Class[...]

18 ThinkPad 390/i Series 1700[...]

ThinkPad 390/i Series 1700 Hardware Maintenance Manual About This Manual This manual contains service and reference information for the IBM ThinkPad 390/i Series 1700 products. Use this manual along with the advanced diagnostics tests to trou- bleshoot problems effectively. The manual is divided into sections as follows:  The introduction sectio[...]

error log and run the test again. Do not replace any FRUs if log errors do not reappear. Be careful not to replace a non-defective FRU. What to Do First The servicer must include the following in the parts exchange form or parts return form that is attached to the returned FRU: 1. Name and phone number of servicer 2. Date of service 3. Date when pa[...]

 Fuses blown by attachment of a nonsupported device  Forgotten computer password (making the computer unusable) The following symptoms might indicate damage caused by by nonwarranted activities:  Missing parts might be a symptom of unauthorized service or modification.  HDD spindles can become noisy from being sub- jected to excessive f[...]

Feature Description Memory 2 DIMM slots, no memory on the planar board 32 MB, 64 MB or 128 MB DIMM card (max. 256 MB) CMOS RAM 114 bytes + 4 Kbytes Video  12.1–inch, 64K colors, 800x600 pixel TFT color LCD  13.3–inch, 64K colors, 1024x768 pixel TFT color LCD  14.1–inch, 64K colors, 1024x768 pixel TFT color LCD Audio  16–bit audi[...]

Fn + Result F2 Fuel-Gauge display on and off F3 Standby mode F4 Suspend mode F7 Switch between the LCD, the external monitor, and both the LCD and external monitor F8 Expand/shrink screen F11 Switch power mode F12 Hibernation mode Status Indicators The system status LED indicators show the current com- puter status. The following shows the location[...]

Symbol Color Meaning (3) Drive in use Orange Data is being read from or written to the hard disk drive, diskette drive, or data is being read from the CD-ROM drive. Do not enter hibernation mode or power off the computer when this indi- cator is on. (4) Numeric lock Green The numeric keypad on the keyboard is enabled. You enable or disable the keyp[...]

1. Obtain the failing symptoms in as much detail as pos- sible. 2. Verify the symptoms by attempting to recreate the failure by running the diagnostic test or by repeating the same operation. Note: To run the diagnostics, refer to “Running the Diagnostics” on page 42 3. Use the following table with the verified symptom to determine which page t[...]

CAUTION: Make sure that the diskette does not have more than one label attached to it. Multiple labels can cause damage to the drive or can cause the drive to fail. Do the following to select the test device. See “Running the Diagnostics” on page 42 for details. 1. Boot from the diagnostics diskette and start the PQA program (please refer to ?[...]

Fan ASM Checkout To check the Fan ASM, do the following: 1. Boot from the diagnostics diskette and start the Fan ASM Diagnostics. 2. Follow the description in the window. If the test detects the Fan ASM problem, replace it. Keyboard and Auxiliary Input Device Checkout Note: Remove the external keyboard if the internal key- board is to be tested. If[...]

Memory errors might stop system operation, show error messages on the screen, or hang the system. Use the following procedure to isolate memory problems: 1. Boot from the diagnostics diskette and start the PQA program (please refer to “PQA System Diagnostics” on page 42). 2. Go to Memory in the test items. 3. Press F2 in the test items. 4. Foll[...]

3. Disconnect the AC Adapter and install the charged battery ASM; then check that power is supplied by the battery ASM. If you suspect a power problem, refer the the appropriate power supply check listed below:  “Checking the AC Adapter”  “Checking the Operational Charging”  “Checking the Battery ASM” on page 30 Checking the AC[...]

Perform operational charging. If the battery status indicator does not turn on, remove the Battery ASM and let it return to room temperature. Reinstall the Battery ASM. If the charge indicator still does not turn on, replace the Battery ASM. If the charge indicator still does not turn on, replace the DC-DC & BATT board, then the planar board. T[...]

If this does not correct the TrackPoint problem, continue with the following. After you use the TrackPoint, the pointer drifts on the screen for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the TrackPoint pointer. This symptom is not a hardware problem. No service actions are necessary if th[...]

 The specified time has elapsed.  Battery low occurs and hibernation conditions are insufficient. Note: When battery is low, the battery status indi- cator blinks orange.  The computer is ejected from the ThinkPad Port Replicator with Advanced Etherjet Feature.  The UltraBay FX (Combobay) switch is pressed. Notes: 1. In the IBM BIOS Set[...]

Notes: 1. In the ThinkPad Configuration program, the computer can be set to suspend when docked. 2. The computer cannot enter hibernation mode when it is attached to the ThinkPad Port Replicator with Advanced Etherjet Feature. Events that cause the computer to enter hibernation mode:  Hibernation mode requested by function key (Fn+F12).  Time[...]

This index can also be used to help you decide the next possible FRUs to be replaced when servicing a computer. Numeric error codes show the errors detected in POST or system operation (runtime). In the following error codes, X can be any number. If no codes are available, use narra- tive symptoms. If the symptom is not listed, go to “Undetermine[...]

Symptom/Error FRU/Action in Sequence 0230 Shadow RAM Failed at offset:nnnn 1. BIOS ROM 2. Planar board 0231 System RAM Failed at offset:nnnn 1. DIMM 2. Planar board 0232 Extended RAM Failed at offset:nnnn 1. DIMM 2. Planar board 0250 System battery is dead — Replace and run SETUP Replace backup battery (RTC) and run BIOS Setup Utility to reconfig[...]

Symptom/Error FRU/Action in Sequence 02B2 Incorrect Drive A type — run SETUP 1. Check that the drive is defined with the proper diskette type in BIOS Setup Utility. 2. Go to “Diskette Drive Checkout” on page 25. 02D0 System cache error — Cache dis- abled 1. CPU card 2. Planar board 02F0 CPU ID: 1. CPU card 2. Planar board 02F5 DMA Test Fail[...]

Symptom/Error FRU/Action in Sequence Operating system not found 1. Enter BIOS Setup Utility and see if the hard disk drive and diskette drive A: are properly identified. 2. Diskette drive (FDD ASM) 3. Hard disk drive 4. Planar board No Beep Symptoms Symptom/Error FRU/Action in Sequence No beep, power-on indicator on, LCD blank, no POST  Ensure e[...]

Keyboard-Related Symptoms Symptom/Error FRU/Action in Sequence Keyboard (one or more keys) doesn't work. 1. Reseat the keyboard cable. 2. Keyboard 3. Planar board Indicator-Related Symptoms Symptom/Error FRU/Action in Sequence Indicator incorrectly remains off or on, but system runs cor- rectly. 1. Reseat the LED board. 2. LED board 3. Planar [...]

Power Management-Related Symptoms Symptom/Error FRU/Action in Sequence The system will not enter hibernation mode. 1. Keyboard (if control is from the keyboard) 2. Hard disk drive 3. Planar board The system will not wake up from hibernation mode. 1. Keyboard (if control is from the keyboard) 2. Hard disk drive 3. Planar board The system will not en[...]

Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electronic discharge, or software errors. FRU replacement should be considered only when a recurring problem exists. When analyzing an intermittent problem, do the following: 1. Run [...]

CE Utility Program Diskette Setting the LCD Panel ID There is an EEPROM in the inverter which stores its sup- ported LCD type ID code. If you replace a LCD with one of a different brand or use a new inverter, the ID information in the inverter EEPROM should be updated. Follow the steps below to set the LCD Panel ID: 1. Boot from the Utility Program[...]

Edit the batch file in the diskette A:active.bat  VPD_BUILDID  VPD_BOXSERIAL  VPD_PLANARSERIAL Flash UUID The EEPROM on the planar board contains the Universal Unique ID (UUID) — that is, for Microsoft or Internet use. When you replace the planar board using the Flash UUID Utility in the ThinkPad CE Utility Diskette. The UUID utility wi[...]

Press the left and right arrow keys to move around the main menu. Press Enter to enable the selected option. The main options are Diag, Result, SysInfo, Option and Exit. The Diag option lets you select testing items and testing times. The following screen appears when you select Diag from the main menu. This screen allows you to specify the number [...]

Specify the desired number of tests and press Enter . After you specify the number of tests to perform, the screen shows a list of test items (see below). Press the up and down arrow keys to move the highlight bar from one item to another. Press Space to enable or disable the item. The > mark indicates that there are avail- able sub-options. Pre[...]

 Test Times show the number of tests to perform. PQA Diagnostic Program Error Codes and Messages Error Code Message FRU/Action in Sequence 16XX Backup battery error Backup battery (RTC) 1XXX CPU or planar board error  Reload BIOS default setting.  CPU card  Planar board 2XXX Memory error  Reconnect PU card.  DIMM  Planar board [...]

Attention: You should execute this program two times (one for internal and the other for external speakers) to verify if the system's audio function is in working order. PCMCIA WrapCard Test Boot from the Diagnostic Program Diskette and select PCMCIA WrapCard Test from PC DOS 7.0 Startup Menu. Follow the instructions on the screen to run the P[...]

2. Select Fan Diagnostics from PC DOS 7.0 Startup menu. 3. Follow the instructions on the screen to execute the fan diagnostics. Note: If the test fails, try reseating the Fan ASM con- nector or replacing the Fan ASM. FRU Removals and Replacements This section contains information about removals and replacements.  Do not damage any parts. Only c[...]

FRU Service Procedures Review the following procedures before replacing any FRU. LCD FRU Replacement Notice: The TFT LCD for the notebook computer contains over 2,359,296 thin- film transistors (TFTs). A small number of missing, discol- ored, or lighted dots (on all the time) is characteristic of TFT LCD technology, but excessive pixel problems can[...]

Battery ASM To remove the Battery ASM, press the latch to release, then pull out the Battery ASM. Reverse the steps described above when installing a new battery pack. Hard Disk Drive Warning  Do not drop or apply any shock to the hard disk drive. The hard disk drive is sensitive to physical shock. Incorrect handling can cause damage and permane[...]

3. Carefully slide out the hard disk drive module to remove. Combo Bay To remove the Combo Bay, press and hold the lock to release, then slide out the Combo Bay module to remove. Diskette Drive (FDD ASM) To remove the Diskette Drive (FDD ASM): 1. Remove the four screws securing the Diskette Drive (FDD ASM) as shown. 2. Disconnect the Diskette Drive[...]

Step Size (Quan- tity) Head & Color Torque 1 M2.5 x 3.5L (3) Flat head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. CD-ROM ASM To remove the CD-ROM ASM: 1. Remove the four screws securing the CD-ROM ASM. 2. Carefully slide out the CD-ROM ASM to remove. Step Size (Quan- tity) Head & Color Torque 1 M2.5x 4L (4)[...]

Combo Bay FPC To remove the Combo Bay FPC: 1. Remove the two screws securing the Combo Bay FPC. 2. Carefully disconnect the Combo Bay FPC from the connector. Step Size (Quan- tity) Head & Color Torque 1 M2.5x 3.5L (2) Pan head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. Hard Disk Adapter Combo Bay ASM To remove [...]

Step Size (Quan- tity) Head & Color Torque 1 M3 x 5L (2) Pan head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. Modem Card  “Battery ASM” on page 49 To remove the modem card: 1. Use a flat-bladed screwdriver to remove the screw on the modem door. 2. Carefully release the latches on both sides of the modem c[...]

Step Size (Quan- tity) Head & Color Torque 1 M2 x 18L (1) Pan head, black 2.0kgf-cm Note: The screws do not separate from the modem board cover. Backup Battery (RTC)  “Battery ASM” on page 49  “Modem Card” on page 53 Warning The lithium battery can cause a fire, explosion, or severe burn. Do not recharge it, remove its polarized c[...]

2. Remove the two screws securing the keyboard. 3. Lift the keyboard up to expose the keyboard con- nector. 4. Use a flat-bladed screwdriver to release the cable from the connector. 5. Remove the keyboard from the lower case. Step Size (Quan- tity) Head & Color Torque 3 M2 x 4L (2) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correc[...]

LED Board  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Keyboard” on page 54 To remove the LED board: 1. Remove the screw securing the LED board then dis- connect the LED cable from the connector. 2. Lift the LED board. Step Size (Quan- tity) Head & Color Torque 2 M2 x 4L (1) Flat head, silver 2.0 kgf-cm Note: M[...]

Step Size (Quan- tity) Head & Color Torque 1 M2.5 x 18L (3) Pan head, black 2.0 kgf-cm 2 M2 x 18L (3) Pan head, black 2.0 kgf-cm 3 M2 x 4L (4) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. PCMCIA Slots  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Keyboard” on page 54 ?[...]

2. Use a flat-bladed screwdriver to disconnect the PCMCIA card from the connector. 3. Carefully remove the PCMCIA card. Step Size (Quan- tity) Head & Color Torque 1 M2 x 18L (3) Pan head, black 2.0 kgf-cm Note: Make sure you use the correct screw for replacement. CPU Board  “Battery ASM” on page 49  “Hard Disk Drive” on page 49 ?[...]

LCD Panel ASM  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Keyboard” on page 54 To remove the LCD Panel ASM: 1. Remove the two screws securing the LCD FPC cable. 2. Remove the LCD FPC cable. 3. Disconnect the LCD FPC cable from the lower case (12.1"). Disconnect the LCD FPC cable and LVDS board (13.3" and[...]

Step Size (Quan- tity) Head & Color Torque 2 M2.5 x 10L (1) M2 x 4L (1) Pan head, silver Pan head, black 12.1"L 1.6 kgf–cm 12.1"R 1.6kgf-cm 2 M2.5 x 18L (1) M2 x 10L (1) Pan head, silver Pan head, silver 13.3" and 14.1" L:1.6 kgf-cm R:1.6 kgf-cm 3 M2.5 x 6L (4) Flat head, black 3.5 kgf-cm Note: Make sure you use the correc[...]

2. Turn the notebook over. Then remove the 4 screws from the base cover. 3. Use a flat-bladed screwdriver to remove the latch. 4. Disconnect the cable from the main unit. Now you can remove the upper cover ASM from the base cover ASM. Step Size (Quan- tity) Head & Color Torque 1 M2 x 4L (3) Flat head, silver 1.6 kgf-cm 2 M2 x 18L (3) Pan head, [...]

IMM Lower Heatsink ASM  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LED Board” on page 56  “Upper Heatsink” on page 56  “CPU Board” on page 58  “LCD Panel ASM” on page 59  “Upper Cover ASM” on page 60 To remove the IMM lower he[...]

1. Remove the screw securing the fan ASM. Lift the fan ASM up to remove. 2. Remove the two screws securing the fan ASM. 3. Remove the mylar from the fan ASM. Step Size (Quan- tity) Head & Color Torque 1 M2 x 4L (1) Flat head, silver 1.6 kgf-cm 2 M2.5 x 3.5L (2) Flat head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacemen[...]

 “Keyboard” on page 54  “LED Board” on page 56  “Upper Heatsink” on page 56  “CPU Board” on page 58  “LCD Panel ASM” on page 59  “Upper Cover ASM” on page 60  “IMM Lower Heatsink ASM” on page 62  “Fan ASM” on page 62 To remove these boards and latch: 1. Remove the power latch and IR board. 2. [...]

 “Power Latch, IR Board, and DC-DC & BATT Board” on page 63 Note: See “Replacing the System Board” on page 48 before proceeding. Remove the two screws from the planar board and gently remove the planar board from the base cover ASM. Step Size (Quan- tity) Head & Color Torque 1 M2.5 x 6L (2) Pan head, black 3.2 kgf-cm Note: Make s[...]

 “Planar Board” on page 64 Disconnect the Combo Bay Interposer Board from the planar board. LCD Bezel ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54 Remove the three screws securing the LCD bezel. 66 ThinkPad 390/i Series 1700[...]

Step Size (Quan- tity) Head & Color Torque 2 M2.5 x 6L (3) Pan head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. Speaker ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 14.1"” on page 66 T[...]

Step Size (Quan- tity) Head & Color Torque 2 M2 x 4L (2) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. VR Board ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 14.1"” on page 66 [...]

Microphone ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 14.1"” on page 66  “Speaker ASM 14.1"” on page 67  “VR Board ASM 14.1"” on page 68 To remove the microphone ASM: 1. Disconnect the power cabl[...]

Step Size (Quan- tity) Head & Color Torque M2 x 4L (2) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. LCD Inverter ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 14.1"” on page 6[...]

LCD FPC ASM 14.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 14.1"” on page 66  “Speaker ASM 14.1"” on page 67  “VR Board ASM 14.1"” on page 68  “Microphone ASM 14.1"” on page 69  “LCD Pan[...]

Step Size (Quan- tity) Head & Color Torque 2 M2.5 x 6L (3) Pan head, black 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. Speaker ASM 13.3"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 13.3"” on page 71 T[...]

3. Gently lift the speaker away from the display panel. Step Size (Quan- tity) Head & Color Torque 2 M2 x 4L (5) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. VR Board ASM 13.3"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” o[...]

LCD Inverter ASM 13.3"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 13.3"” on page 71  “Speaker ASM 13.3"” on page 72  “VR Board ASM 13.3"” on page 73 Note: See “Setting the LCD Panel ID” on page 41. To [...]

LCD Panel ASM 13.3"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 13.3"” on page 71  “Speaker ASM 13.3"” on page 72  “VR Board ASM 13.3"” on page 73  “LCD Inverter ASM 13.3"” on page 74  “Mic[...]

 “Keyboard” on page 54  “LCD Bezel ASM 13.3"” on page 71  “Speaker ASM 13.3"” on page 72  “VR Board ASM 13.3"” on page 73  “LCD Inverter ASM 13.3"” on page 74  “Microphone ASM 13.3"” on page 74  “LCD Panel ASM 13.3"” on page 75 Disconnect the LCD FPC cable from the LCD. [...]

Step Size (Quan- tity) Head & Color Torque 2 M2.5 x 6L (3) Pan head, black 3.2 kgf-cm Note: Make sure you use the correct screw for replacement. Speaker ASM 12.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 12.1"” on page 76 T[...]

Step Size (Quan- tity) Head & Color Torque 2 M2 x 4L (5) Flat head, silver 1.6 kgf-cm Note: Make sure you use the correct screw for replacement. VR Board ASM 12.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 12.1"” on page 76 [...]

LCD Inverter ASM 12.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 12.1"” on page 76  “Speaker ASM 12.1"” on page 77  “VR Board ASM 12.1"” on page 78 Note: See “Setting the LCD Panel ID” on page 41. To [...]

LCD Panel ASM 12.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 12.1"” on page 76  “Speaker ASM 12.1"” on page 77  “VR Board ASM 12.1"” on page 78  “LCD Inverter ASM 12.1"” on page 79  “Mic[...]

Step Size (Quan- tity) Head & Color Torque 2 M3 x 5L (4) Flat head, silver 3.2 kgf-cm Note: Make sure you use the correct screw for replacement. LCD FPC ASM 12.1"  “Battery ASM” on page 49  “Hard Disk Drive” on page 49  “Combo Bay” on page 50  “Keyboard” on page 54  “LCD Bezel ASM 12.1"” on page 76 ?[...]

Switch Location Keyboard Lan- guage US/European Japanese J2 ON OFF J3 ON ON 82 ThinkPad 390/i Series 1700[...]

System Unit Parts Listing ThinkPad 390/i Series 1700 83[...]

Index Description FRU Number 1 MIDDLE COVER ASM 05K5481 2 LED BOARD ASM W/ CABLE 10L1154 3 See Keyboard list 4 UPPER HEATSINK FOR TILLAMOOK 05K5473 UPPER HEATSINK FOR DESCHUTES 05K5474 5 CPU CARD (TM233, 280P) 10L1199 CPU CARD (DS233, 280P) 10L1200 CPU CARD (DS266, 280P) 10L1201 6 PCMCIA HOLDER ASM 05K5476 7 UPPER COVER ASM 12.1"/13.3" 05[...]

Index Description FRU Number 25 MODEM DOOR ASM 05K5483 26 COMBO CD-ROM + FDD ASM 05K8935 COMBO FDD ASM 05K8936 27 FDD ASM 05K8978 28 CD-ROM ASM (TOSHIBA) 05K8979 DUMMY CDROM 05K5979 29 COMBO BAY BRACKET ASM 05K5919 30 COMBO BAY FPC KIT 05K2819 AC ADAPTER AC ADAPTER 3P 56W (SANKEN) 02K7007 AC ADAPTER 2P 56W (SANKEN) 11J8974 AC ADAPTER 2P 56W (ASTEC)[...]

Index Description FRU Number KBD ASM Korean 02K4730 KBD ASM LA Spanish 02K4731 Miscellaneous MISC NAME PLATE LABEL PACK 05K5921 RUBBER KIT 05K5920 FPC STOPPER TAPE 05K5914 MYLAR PACK 05K5982 SCREW PACK 05K5489 FOOT L&R 05K5504 Others AC Adapter 45W (2 PIN) (with infor- mation label) 12J0536 AC Adapter 45W (3 PIN) (with infor- mation label) 12J0[...]

Index Description FRU Number Power cord (Chile, Italy) 76H3530 Power cord (Japan) 13H5273 ThinkPad 390/i Series 1700 87[...]

LCD Unit Parts Listing 12.1" LCD ASM Parts Listing Index System Unit FRU Number 1 LCD BEZEL ASM (12.1" TFT) 05K5469 2 MICROPHONE ASM W/ HOLDER 05K5477 3 CABLE ASM FOR SPK/MIC/VR BOARD 05K2818 4 SPEAKER ASM (12.1"/13.3") 05K5467 5 VR BOARD ASM (12.1"/13.3") 10L1204 6 LCD INVERTER (12.1" TFT) 10L1151 7 LCD PANEL ASM[...]

Index System Unit FRU Number LCD MISC PARTS 05K5488 LG/IBM Logo Kit 05K6044 13.3" LCD ASM Parts Listing Index System Unit FRU Number 1 LCD BEZEL ASM (13.3" TFT) 05K5471 2 MICROPHONE ASM W/ HOLDER 05K5477 3 CABLE ASM FOR SPK/MIC/VR BOARD 05K2818 4 SPEAKER ASM (12.1"/13.3") 05K5467 5 LCD INVERTER (13.3" TFT) 10L1203 6 VR BOAR[...]

Index System Unit FRU Number 11 HINGE CAP L,R (12.1"/13.3") 05K5466 12 HINGE L,R (12.1"/13.3") 05K5465 13 LVDS BOARD ASM (13.3"/14.1") 10L1208 LG/IBM Logo Kit 05K6044 14.1" LCD ASM Parts Listing Index System Unit FRU Number 1 LCD BEZEL ASM (14.1" TFT) 05K5945 2 MICROPHONE ASM W/ HOLDER 05K5477 3 CABLE ASM FOR[...]

Index System Unit FRU Number 8 LCD FPC ASM (14.1" TFT) 05K2817 9 LCD INVERTER (14.1" TFT) 10L1202 10 VR BOARD ASM (14.1"/13.3") 10L1205 11 LCD REAR COVER ASM (14.1" TFT) 05K5915 12 LVDS BOARD ASM (13.3"/14.1") 10L1208 LCD MISC PARTS 05K5488 LG/IBM Logo Kit 05K6044  ThinkPad 390/i Series 1700  91[...]

Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any refer- ence to an IBM product, program, or service is not intended to state or imply that only IBM product, program, or service may be used. Subject to IBM's valid intel[...]

IBM  Part Number: 10L9626 Printed in U.S.A. S1ðL-9626-ðð[...]