Iiyama ProLite E2280WSD manual

ENGLISH USER MANUAL Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor . Please keep this manual in a safe place for your future reference.[...]

ENGLISH[...]

ENGLISH Congratulations! This product is TCO Certified for Sustainable IT TCO Certified is an internatio nal thir d party sustainability certification for IT products. TCO Certified ensures that the manufacture, use and recycling of IT products reflect en vironmental, social and economic responsibility. Every TCO C ertified product model is verifie[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners.  As an ENERGY ST AR ® Partner , iiyama has determined that this product meets the ENERGY ST AR ® guidelines for energy ef fi ciency . We recommend recycling of used product. Plea[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY .......................................................................... 1 SAFETY PRECAUTIONS .............................................................. 1 SPECIAL NOTES ON LCD MONITORS ....................................... 3 CUSTOMER SER VICE ........................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR IF YOU ARE A W ARE OF ANY PROBLEMS If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER RE[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you first turn on the LCD monitor , the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of the[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. BEFORE YOU OPERA TE THE MONITOR CHECKING THE CONTENTS OF THE P ACKAGE FEA TURES  Supports R[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5  When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the monitor . Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside th[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before removal or installation to avoid electric shock or damage. CAUTION <Installation> Put [...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7  Put the monitor on a stable surface. The monitor may cause injury or damage if it falls or is dropped.  Do not give a strong impact to the monitor . It may cause damage.  Unplug the monitor before removal or installation to avoid electric shock or damage. CAUTION FITTING AND REMOV AL OF B[...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : ProLite B2280WSD Power Switch ( ) Menu Button (MENU) + / V olume Button (+/ ) Power Indicator Blue: Normal operation Orange: Power Management - / ECO Button (- / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) Audio Connector ( ) AC Conn[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 CONTROLS AND CONNECTORS : ProLite E2280WSD Power Switch ( ) Menu Button (MENU) + / V olume Button (+/ ) Power Indicator Blue: Normal operation Orange: Power Management - / ECO Button (- / ) Auto Button (AUTO) Speakers D-SUB mini 15pin Connector (D-SUB) DVI-D 24pin Connector (DVI) Installation hole of Cable [...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONIT OR : ProLite B2280WSD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the m[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 CONNECTING YOUR MONIT OR : ProLite E2280WSD Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio features. Connect the Power Cable to the [...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR  Signal T iming Change to the desired signal timing listed on page 30: COMPLIANT TIMING. COMPUTER SETTING  For optimal viewing it is recommended to look at the full face of the monitor .  Hold the stand so that the monitor does not topple when you change the monitor ’s angle.  Y ou are able t[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B2280WSD  For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor , then adjust the monitor ’s height and angle to your own preference.  Hold the panel so that the monitor does not topple when [...]

ENGLISH 14 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 30. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 21 for SCREEN ADJUSTMENTS.  Press [...]

ENGLISH OPERA TING THE MONITOR 15 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press Luminance T oo dark T oo bright Brightness * Contrast T oo dull T oo intense * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Luminance Contrast Brightness Eco i-Style Color 50 50 Off St[...]

ENGLISH 16 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Image Setup Phase* 1,2 Clock* 1,2 T oo left T oo right T oo low T oo high H. Position* 2 V . Position* 2 T oo narrow T oo wide T o correct fl ickering text or lines Image Setup Clock Phase H.Position V .Position 50 50 50 50 Aspect Full * 1 See page 21 for SCREEN ADJ[...]

ENGLISH OPERA TING THE MONITOR 17 Adjustment Item Problem / Option Button to Press Color T emp. Y ellowish white Bluish white User-G User-R User-B T oo weak T oo strong User Greenish white Normal Mode1 Mode2 Dark High contrast Mode3 Color T emp. Gamma User-R User-G User-B 50 50 Mode1 50 Color T emp. War m Gamma Color T emp. Normal W arm Cool sRGB s[...]

ENGLISH 18 OPERA TING THE MONITOR Language English Deutsch English German Français French Japanese Portuguese Italiano Italian Russian Simpli fi ed Chinese Español Spanish Portuguese T imeout H.Position OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time between 5 and 60 seconds. Adjustment [...]

ENGLISH OPERA TING THE MONITOR 19 See your graphic card user guide for more information about changing the resolution and refresh. NOTE Displays information regarding the current input signal coming from the graphic card in your computer . Information Adjustment Item Problem / Option Button to Press Extra Reset Factory-preset data is restored. No R[...]

ENGLISH 20 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press V olume T oo soft T oo loud Adjustment Item Problem / Option Button to Press Auto Adjust * Y ou can skip the Menu items and display an adjustment scale directly by using the following button operations. Direct Adjust H. / V . Position, Clock and Phase automatically .[...]

ENGLISH OPERA TING THE MONITOR 21 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 1920 × 1 08 0, b u t ca n no t provide the best at resolutions of[...]

ENGLISH 22 OPERA TING THE MONITOR F 1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to[...]

ENGLISH OPERA TING THE MONITOR 23  In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the Clock may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H.Position after the Phase adjustment [...]

ENGLISH 24 OPERA TING THE MONITOR  Even when using the power management mode, the monitor consumes electricity . T urn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sig[...]

ENGLISH TROUBLE SHOOTING 25 TROUBLE SHOOTING 1. Perform the adjustments described in OPERA TING THE MONIT OR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERA TING THE MONITOR or if the problem persists. 3. If you are expe[...]

ENGLISH 26 TROUBLE SHOOTING / RECYCLING INFORMA TION No sound.  The audio equipment (computer etc.) is ON.  The Audio Cable is properly connected.  The V olume is turned up.  The audio output level of the audio equipment is within the speci fi cation of the monitor .  The audio output level of the audio equipment is w[...]

ENGLISH APPENDIX 27 SPECIFICA TIONS : ProLite B2280WSD APPENDIX Design and speci fi cations are subject to change without prior notice. * Audio equipment is not connected. LCD Panel Panel technology TN 0.282mm H × 0.282mm V Response time Pixel pitch 5ms (Black, White, Black, T ypical) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal[...]

ENGLISH 28 APPENDIX SPECIFICA TIONS : ProLite E2280WSD * Audio equipment is not connected. LCD Panel Panel technology TN 0.282mm H × 0.282mm V Response time Pixel pitch 5ms (Black, White, Black, T ypical) Display Colours Approx.16.7M Sync Frequency Analog: Horizontal: 24.0-80.0kHz, V ertical: 56-75Hz Digital: Horizontal: 30.0-80.0kHz, V ertical: 5[...]

ENGLISH APPENDIX 29 DIMENSIONS : ProLite B2280WSD DIMENSIONS : ProLite E2280WSD ( ) : Maximum adjustment range 476.0mm/18.7” 512.5mm/20.2” 298.0mm/1 1.7” 348.5mm/13.7” 244.5mm/9.6” 48.5mm/1.9” 423.5mm/16.7”(553.5mm/21.8”) 476.0mm/18.7” 512.5mm/20.2” 298.0mm/1 1.7” 348.5mm/13.7” 219.5mm/8.6” 204.5mm/8.0” 48.5mm/1.9” 395[...]

ENGLISH 30 APPENDIX M088B21 COMPLIANT TIMING 640 × 480 832 × 624 1024 × 768 Dot Clock 25.175MHz 31.500MHz 31.500MHz 36.000MHz 40.000MHz 49.500MHz 50.000MHz 65.000MHz 75.000MHz 78.750MHz 108.000MHz 135.000MHz 106.500MHz 146.250MHz 30.240MHz 57.283MHz 80.000MHz 21.053MHz V ertical Frequency 59.940Hz 75.000Hz 72.809Hz 56.250Hz 60.317Hz 75.000Hz 72.[...]