Impex EVE-1500 manual

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Pack Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model EVE-1500 Retain This Manual for Reference 08-17-05 OWNER'S MANUAL CORNER GYM EVE-1500 Made under license from trademark owner Ev erlast Worldwid[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFET Y NOTICES...................................................................……….. 2 HARDW ARE PACK……….....….....................................................................………..[...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

WA RNING LA BEL REPLA CEMENT The w arning labels show n here h ave been p laced on th e Left Base Frame an d Right Up per Frame. If the labels are missing or illegible, please call customer service at 1- 800-999-8899 for replacement s. A pply the labels in location shown. 3[...]

HA RDWA RE PA CK 4[...]

HA RDWA RE PA CK 5[...]

HA RDWA RE PA CK 6[...]

A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible injury . STEP 1 (See Diagram 1) A.) Place the Right and Left Base Frames (#1 & #14) on a flat surface. Make sur e there is enoug h space to ass[...]

STEP 2 (See Diagram 2) A.) Insert two Guide Rods ( #12) into the holes on the Gui de Rod Base (#10). Secur e each Guide Rod w ith one M10 x ¾” Al len Bolt ( #80) and Ø ¾” W a sher (#94) from the bottom. B.) Attach the Guide Rod Base to the Left and Right Base Frames (#1 & #14) . Secure each side wi th one M10 x 2 1/8” Allen Bol t (#83)[...]

STEP 3 (See Diagram 3) A.) Attach the Right Ver tical Beam ( #3) onto the Rig ht Base Frame (#1). Secure it w ith two M 10 x 2 ½” Carri age Bolts ( #87), Ø ¾” W ashers (#94), and M10 Ai rcraft Nuts (#97). B.) Attach the Left Vertical Beam (#17) onto the Left Base Frame (#14). Secure i t with two M 10 x 2 ½” Carri age Bolts ( #87), Ø ¾?[...]

DIAGRAM 3 10[...]

STEP 4 (See Diagram 4) A.) Slide nineteen W eight Plates (#59) onto the Gui de Rods (#12). M ake sure the gr ove on the Plates all face tow ard front of the machine. Insert the Selector Rod ( #13) into the center hole. It is str ongly recommended to spray lubri cant such as W D-40 on the two Gui de Rods to minimi ze fric tion. B.) Slide the Selecto[...]

DIAGRAM 4 12[...]

STEP 5 (See Diagram 5) A.) Attach the Right Seat Support (#2) onto the Right Base Fr ame (#1). Secure it wi th one M10 x 2 ½ ” Carriage Bol t (#87), Ø ¾ ” W asher (#94), and M10 Airc raft Nut (#97). B.) Attach the Right Seat Support (#2) to the Rig ht Vertical Beam ( #3). Secure it with two M 10 x 2 ½” Carri age Bolts ( #87), one 4 3/8”[...]

STEP 6 (See Diagram 6) A.) Attach the Left Seat Support (#15) to the Left Base Frame (#14). Secure it w ith one M10 x 2 ½”Car riag e Bolts (#87), Ø ¾ ” W asher (#94), and M10 Air craft Nut (#97). B.) Attach the Left Seat Support to the Lef t Vertical Beam (#17). Secure i t wi th two M 10 x 2 ½ ” Carri age Bolts ( #87), one 4 3/8” x 1 ¾[...]

STEP 7 (See Diagram 7) A.) Align the Front Press Base ( #19) to the Left Upper Frame (#18) . Insert a 6” Axle (#52) through the holes and secure it w ith two Ø ¾” W ashers (#94) and M10 Ai rcraft Nuts (#97) . B.) Insert the axle on the Left Butterfly ( #20) through the hol es on the Front Press Base. Sli de a Ø 1 ½” x Ø ¾” W asher (#6[...]

Cable Loop Diagram 16[...]

STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Attach one end of the 118” Butterfly C able (#42) to the hook on the R ight Butter fly (#21) . Draw the Cable to the right open Sw iv el Pulley Bracket (#26). B.) Attach a Pulley (#60) to the Br acket. Secure it w ith one M10 x 1 ¾” Al len Bolt (#82) , two ∅ ¾” W ashers (#94), and one M1[...]

STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach the end of the 115” Front Press Cable (#43) to the open bracket on the Left Vertical Beam ( #17). Secure it with one M 10 x 1” Allen Bolt ( #81), tw o Ø ¾” W ashers (#94), and one M10 Ai rcraft Nut ( #97). B.) Draw the C able to the opening on the Fr ont Press Base (#19). Attach a P[...]

DIAGRAM 9 19[...]

STEP 10 (See Diagram 10 & Cable Loop Diagram) A.) Attach the 180” Upper Cable (#40) to the f ront opening on the Ri ght Upper Frame (#4). B.) Place a Pulley ( #60) to the opening and secur e it with one M10 x 2 3/8” Allen Bolt (#84), two Pull ey Bushi ngs (#78) , and one M10 Airc raft Nut (#97). Make sur e the ball stopper on the Cable is u[...]

STEP 11 (See Diagram 11 & Cable Loop Diagram) A.) Attach the 105” Lower Cabl e (#41) to the openi ng on the bottom of Leg Dev eloper (#7). B.) Attach a Pulley (#60) to the opening. Secure i t wi th one M10 x 2 3/8” Allen Bol t (#84), tw o Pulley Bushings ( #78), and one M10 Ai rcraft Nut (#97) . C.) Draw the Cable underneath the Pulley tow [...]

STEP 12 (See Diagram 12 & Cable Loop Diagram) A.) Attach one end of the 276” Leg Press Cable (#44) to the open bracket underneath the Left Seat Support (#15). Secure it with one M 10 x 1” Allen Bolt ( #81), tw o Ø ¾” W ashers (#94), and one M 10 Aircr aft Nut (#97). B.) Attach a Pulley to the top opening on the Leg Press Frame (#16). Se[...]

DIAGRAM 12 23[...]

STEP 13 (See Diagram 13) A.) Attach a Backrest Board (#38) to the Ri ght Verti cal Beam (#3). Secur e it with tw o M8 x 2 1/8” Al len Bolts (#89) and Ø 5/8” W ashers (#93). B.) Attach a Seat Pad (#37) onto the Rig ht Seat Support (#2). Secur e it w ith tw o M8 x 2 1/8” Allen Bol ts (#89) and Ø 5/8” W ashers (#93). C.) Attach the Arm Curl [...]

STEP 14 (See Diagram 14) A.) Attach a Backrest Board (#38) to the Left Vertical Beam ( #17). Secure it with tw o M8 x 2 1/8” Al len Bolts (#89) and Ø 5/8” W ashers (#93). B.) Attach a Seat Pad (#37) onto the Left Seat Support (#15). Secure it w ith two M8 x 2 1/8” Allen Bol ts (#89) and Ø 5/8” W ashers (#93). C.) Attach the Leg Press Plat[...]

STEP 15 (See Diagram 15) A.) Attach the W eight Stack Cov er (#29) to the Gui de Rod Upper Fr ame (#11) and Guide R od Base (#10). Secure i t wi th four M10 x ¾ ” Allen Bolt s (#80) and Ø ¾” W a shers (#94). DIAGRAM 15 26[...]

STEP 16 (See Diagram 16) A.) Connect the Lat Bar (#5) to the 180” Upper Cable (#40) wi th two C -clips ( #75) and a Short Chain (#74) . Store the Lat Bar onto the hooks on the Ri ght Upper Frame. B.) Connect the Abdominal Strap (#99) to the C able Head Connector (#45) w ith a C-clip. Secure the C-cli p to the Connector w ith one M10 x 1 1/8” Al[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Right Base Fram e 1 2 Right Seat Support 1 3 Right Vertical Beam 1 4 Right Upper Fram e 1 5 Lat Bar 1 6 Arm Curl Stand 1 7 Leg Developer 1 8 Arm Curl Handle 1 9 Rear Vertical Beam 1 10 Guide Rod Base 1 11 Guide Rod Upper Fram e 1 12 Guide Rod 2 13 Selector Rod 1 14 Left Base F ram e 1 15 Left Seat Support 1 1[...]

EVE-1500 Weight Resistance Chart WEIGHT FRONT LOW LAT BUTTERFLY AB LEG PLATE PRESS PULLEY BAR STATION STATION PRESS 1 25 30 30 15 30 30 2 35 40 40 20 40 45 3 45 50 50 25 50 60 4 55 60 60 30 60 75 5 65 70 70 35 70 90 6 75 80 80 40 80 105 7 85 90 90 45 90 120 8 95 100 100 50 100 135 9 105 110 110 55 110 150 10 115 120 120 60 120 165 11 125 130 130 65[...]

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be f ree from def ects in work m ans hip and m aterial, under norm al use and s ervic e conditions , f or a per iod of two years on the F ram e f r om the date of purchase. T his warr anty extends only to the original purchaser . IMPEX 's obligation under thi[...]