Integra DPC-7.7 manual

DPC-7.7 Instr uction Manual D VD Changer[...]

2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near an y heat [...]

3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illegal with- out the permission of the copyright holder . 2. A C Fuse —The AC fuse inside the unit is not user - serviceable. If you cannot turn on the unit, contact your Integra/Onk yo dealer . 3. Care —Occasionally you should dust[...]

4 Precautions —Continued This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PR ODUCT”. So, to use this model properly , read this Instruction Manual carefully . In case of any trouble, please contact the store where you purchased the unit. To prev ent being exposed to the laser beam, do not try to open the [...]

5 Contents Important Safety Instructions .................. 2 Precautions ................................................ 3 Contents ..................................................... 5 Introduction ............................................... 6 Supplied Accessories..................................... 6 DPC-7.7 Features ....................[...]

6 Intr oduction Thank you for purchasing an Integra DPC-7.7 D VD Changer . Read this manual carefully before using your new D VD Changer . A good understanding of its features and operation will allow you to achie ve optimum perfor- mance and enjoyment. Keep this manual for future reference. Make sure you ha ve the follo wing accessories: In catalo[...]

7 Introduction —Continued *1. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laborato- ries. *2. “DTS” and “DTS Digital Out” are trademarks of DTS, Inc. *3. Windo ws Media, and the W in- dows logo are trademarks, or registered trademarks of Microsoft Corporation in the Unite[...]

8 Introduction —Continued • Don’t use discs that ha ve residue from adhesi ve tape, rental discs with peeling labels, or discs with custom- made labels or stickers. Doing so may damage the DPC-7.7 and you may not be able to remov e the disc properly . About playing copy-controlled CDs Some copy-controlled CDs may not conform to of ficial CD [...]

9 Introduction —Continued •Y ou can determine the order in which the DPC-7.7 plays/displays your MP3/WMA songs and JPEG pic- tures by prefixing file and folder names with a three- digit number . For example 001.Root, 002.F older , and so on, and 001.T rack.mp3, 002.T rack.mp3, and so on. • Only the first eight characters of folder and trac[...]

10 Introduction —Continued ■ CD-R (compact disc recordab le): A type of CD that can be recorded only once. Can be used to make audio CDs, or MP3/WMA/JPEG discs. ■ CD-R W (compact disc rewritable): A type of CD that can be recorded many times. Can be used to make audio CDs, MP3/WMA/JPEG discs. ■ Chapter: T itles on D VD-V ideo discs can be s[...]

11 Contr ols & Connector s The page numbers in parentheses show where you can find the main e xplanation for each item. A Standby/On b utton (24) This button is used to set the DPC-7.7 to On or Standby . Don’t turn on the po wer until you’v e completed, and double checked all connections (page 24). B Standby indicator (24) This indicator l[...]

12 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main e xplanation for each item. 1 CHAIN MODE, ALL, D VD & CD indicators (35) The CHAIN MODE indicator appears when the Chain mode function is on. The ALL, DVD, and CD indicators show the type or Chain mode selected. When Party mode is select[...]

13 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main e xplanation for each item. A RS 232 This port is for servicing. B IR IN/OUT (23) The IR IN connector can be used to connect a com- mercially av ailable IR receiver , which can be used to pickup signals from the remote controller when the DP[...]

14 Controls & Connector s —Continued The page numbers in parentheses show where you can find the main explanation for each item. A On button (24) This button is used to turn on the DPC-7.7. Don’t turn on the DPC-7.7 until you’ ve completed, and double checked all connections (page 17). B Standby b utton (24) This button is used to set th[...]

15 Controls & Connector s —Continued N Aspect/Zoom button (43, 46) This button is used to change the vie w mode. Press- ing and holding it for a few seconds selects Zoom mode. O Resolution button (41) This button is used to set the video resolution of the HDMI OUT , and to turn the HDMI OUT on or off. P Open/Close [ ] button (25, 26) This but[...]

16 Bef ore Using the DPC-7.7 Notes: • If the remote controller doesn’t w ork reliably , try replacing both batteries. • Don’t mix ne w and old batteries, or different types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to prev ent possible leakage and corrosion. • Flat batteries sh[...]

17 Connecting the DPC-7.7 This chapter explains ho w to connect the DPC-7.7 to your other A V components. • Read the manuals supplied with your A V components. • Don’t connect the po wer cord until you’v e completed all audio and video connections. Optical Digital Jack The DPC-7.7’ s optical digital jack has shutter-type cov er that open [...]

18 Connecting the DPC-7.7 —Continued This section explains ho w to connect the DPC-7.7 to your TV or projector . In this hookup example, the TV handles the audio and video. To enjoy Dolby Digital or DTS (5.1-channel surround), you’ll need a compatible decoder (see page 19). The DPC-7.7 has three types of video output: component video , S-V ideo[...]

19 Connecting the DPC-7.7 —Continued To enjoy Dolby Digital or DTS surround sound, you need to connect one of the DPC-7.7 digital audio outputs to the digital input on a Dolby Digital or DTS decoder or an A V receiv er with built-in decoders. Analog Connection Use an RCA/phono audio cable to connect the DPC-7.7’ s AN ALOG A UDIO OUTPUTs to a pa[...]

20 Connecting the DPC-7.7 —Continued Digital Connection Use an optical (or coaxial) digital audio cable to connect the DPC-7.7’ s COAXIAL (or OPTICAL) DIGIT AL A UDIO OUTPUT to an optical (or coaxial) input on your stereo amp, as shown. Notes: • Be sure to set the Audio menu, Digital/HDMI Audio Out setting to “PCM” (see page 47). Otherwis[...]

21 Connecting the DPC-7.7 —Continued Notes: • The DPC-7.7 supports HDCP (High-bandwidth Digi- tal Content Protection), a protection system for digital video. HDMI components that you connect to the DPC-7.7 must also support HDCP . • The DPC-7.7 supports High-Definition Multimedia Interface Specification Information V ersion 1.0. HDMI & [...]

22 Connecting the DPC-7.7 —Continued • Do not use a power cord other than the one supplied with the DPC-7.7. The po wer cord supplied is designed for use with the DPC-7.7 and should not be used with any other de vice. •N ev er ha ve the po wer cord disconnected from the DPC-7.7 while the other end is plugged into the wall outlet. Doing so may[...]

23 Connecting the DPC-7.7 —Continued Y ou can use the following multi-room kits to control the DPC-7.7 when it’ s out of range of the remote controller: • Multiroom kits such as those made by Niles and Xan- tech. Controlling the DPC-7.7 When It’ s Out of Range If the DPC-7.7 is located in another room, installed in a cabinet, or out of rang[...]

24 Po wering Up & Setting Up the DPC-7.7 Before connecting the power cord, connect all your A V components (see page 17 to page 23). Don’t for get to turn on your TV or projector and select the video input to which the DPC-7.7 is connected. If you’ re using a hi-fi amp, A V receiv er , or surround sound decoder for audio playback, turn tha[...]

25 Basic Pla ybac k This section explains ho w to load and remov e discs. Notes: •Y ou can load up to six discs. Y ou don’t ha ve to load all six discs ev ery time. • When the disc tray is closed, all of the disc indicators appear until the DPC-7.7 has checked each bay for the presence of a disc. If a bay is found to hav e no disc, the corres[...]

26 Basic Playbac k —Continued This section explains ho w to load and remov e discs with- out stopping playback. The section explains ho w to select loaded discs. Notes: • The type of disc currently selected is shown on the dis- play: D VD, or CD (see page 12). •Y ou can select discs while the DPC-7.7 is stopped or during playback. •Y ou can[...]

27 Basic Playbac k —Continued This section explains ho w to start, pause, and stop play- back. Notes: • During playback, you can select chapters or tracks by using the Up [ ] and Down [ ] buttons. • When you stop playback of a D VD-V ideo disc, the DPC-7.7 remembers the point at which playback was stopped. T o resume playback from that point,[...]

28 Basic Playbac k —Continued D VD-V ideo discs usually have an onscreen menu from which you can select titles, chapters, and other options, including foreign language soundtracks, subtitles, and audio formats (e.g., Dolby Digital or DTS). Notes: • Not all D VD-V ideo discs have menus. • Menu operation varies from disc-to-disc. See the disc?[...]

29 Basic Playbac k —Continued On the disc navigation windo w , you can select CD tracks or MP3, WMA, or JPEG files. Using the Disc Navigation Window 1 Load and select an audio CD or MP3, WMA, or JPEG disc. See page 25 and page 26. The disc navigation windo w appears. It may take a while to read the contents of discs that contain many files and [...]

30 Basic Playbac k —Continued Notes: •Y ou can use the Random Playback function to play a random selection of MP3/WMA files (page 37). • During random playback, memory playback, or party mode playback, the remote controller’ s navigation [ ], [ ], [ ], [ ] buttons, Open/Close [ ] button, and Disc Skip [+]/[–] buttons cannot be used with [...]

31 Basic Playbac k —Continued Notes: •Y ou can also select chapters by using the number but- tons, without opening the Search window . • If the current D VD-V ideo disc contains only one title, you won’ t be able to select other titles. Similarly , if it contains no chapters, you won’ t be able to select chap- ters. •D VD-V ideo discs u[...]

32 Basic Playbac k —Continued The section explains ho w to fast forward and re verse. Notes: • No sound is output during fast forward or f ast rev erse of a D VD-V ideo or MP3 disc. •F ast forward and fast re verse cannot be used with WMA files. W ith the Frame-by-Frame Playback function, you can forward playback one frame at a time. Notes: [...]

33 Basic Playbac k —Continued W ith the Slow-motion Playback function you can w atch a scene slowly either forw ard or backward. Notes: • No sound is output during slow-motion playback. • The slow-motion speed indication is only approxi- mate, and the actual speed will vary from disc to disc. Y ou can adjust the brightness of the display as f[...]

34 Basic Playbac k —Continued The DPC-7.7 supports JPEG CDs, so you can view your photos on TV either indi vidually or as a slideshow . Notes: •Y ou can view JPEG images in high definition by changing the HD JPEG mode setting (see page 46). • The Memory and Random functions cannot be used with JPEG files. Using JPEG CDs 1 Load and select a [...]

35 Basic Playbac k —Continued W ith the Chain mode function, you can play all discs, all D VD-V ideo discs, or all audio CDs and MP3/WMA discs consecutiv ely as if they were one big disc. Note: • JPEG files are skipped during Chain mode playback. •W ith the D VD and All Chain modes, DVD-V ideo menus are ignored and titles are played automati[...]

36 Ad v anced Pla ybac k W ith the Repeat Playback function you can play the cur- rent disc, title, chapter , track, or folder of MP3/WMA files ov er-and-ov er again. Notes: • Repeat Playback may not work with some D VD-V ideo discs. • If you press the [Repeat] button while the Memory Playback function is on (see page 38), the current memory l[...]

37 Adv anced Playbac k —Continued W ith the Random Playback function you can enjoy a random selection of discs, titles, chapters, tracks, or MP3/WMA folders. Notes: •T o select the next random disc, title, chapter , track, or MP3/WMA folder during random playback, press the Up [ ] button. • Random playback may not work with some D VD-V ideo d[...]

38 Adv anced Playbac k —Continued W ith the Memory Playback function, you can create your own memory list of up to 32 titles, chapters, or tracks. Inserting New Items in the List Memory Playbac k 1 Press the [Memory] button. The Memory List window appears onscreen, as shown. The top row ( ) is used to enter disc, title/folder , and chapter/track [...]

39 Adv anced Playbac k —Continued Deleting Items from the List Editing Steps • Deleting the memory list: Press the Stop button to stop playback of the memory list, and while “Memory” is displayed onscreen, press the [CLR] button. The memory list is deleted and “Memory Clear” is displayed onscreen. Notes: • The entire memory list is cl[...]

40 Adv anced Playbac k —Continued Some D VD-V ideo discs feature soundtracks in sev eral languages and audio formats (e.g., Dolby Digital or DTS). Music D VD-V ideo discs sometimes feature soundtracks in sev eral audio formats, such as PCM or Dolby Digital 5.1. See the disc’ s sleeve notes for details. Notes: •W ith D VD-V ideo discs, when yo[...]

41 Adv anced Playbac k —Continued This section explains ho w to turn HDMI on and off and change the video resolution when your TV or projector is connected to the HDMI OUT . Tip: These settings can also be changed by using the onscreen setup menus (see page 46). Notes: • Depending on your setup, you may find that there’ s no picture when you[...]

42 Adv anced Playbac k —Continued W ith the Last Memory function you can resume play- back from where you left off e ven if another disc has been selected or the disc has been remov ed. Last Mem- ory also remembers the soundtrack and subtitle lan- guages that you were using. Notes: • The Last Memory function can store the settings for up to six[...]

43 Adv anced Playbac k —Continued W ith the Zoom function you can enlarge an y part of the picture. Notes: • During a JPEG slideshow , you can use the Fast For - w ard [ ] and Fast Re verse [ ] buttons to zoom in and out. • The Zoom function may not work with some D VDs. • The Zoom function can also be used while playback is paused or durin[...]

44 Configuring the DPC-7.7 This chapter explains the v arious functions and settings of the onscreen setup menus. Functions and settings are arranged into six menus: Picture , A udio , Language , Display , Operation Setting , and Initial . The following table lists all the functions and settings, with a brief description and page number where you [...]

45 Configuring the DPC-7.7 —Continued This section explains ho w to use the onscreen setup menus. TV Shape W ith this setting you can select a picture format to match the aspect ratio of your TV . 4:3 Letter box (default): Choose this option if you hav e a standard TV (4:3 aspect ratio). When you watch widescreen D VD-V ideo movies, the entire p[...]

46 Configuring the DPC-7.7 —Continued View Mode W ith this setting you can adjust the aspect of the picture so that it fits your TV screen. Due to your TV’ s aspect ratio setting and the D VD’ s aspect ratio, black bars may appear abov e and below the picture or at the sides and the aspect of the picture may be unsuitable. In this case, use[...]

47 Configuring the DPC-7.7 —Continued Video Black Le vel W ith this setting you can adjust the picture blackness of analog video output. It does not affect the component video output when it’ s set to progressive. Light: Blacks are lighter , and the entire picture becomes lighter . Dark: Blacks are darker , and the entire picture becomes darke[...]

48 Configuring the DPC-7.7 —Continued On-Screen Language W ith this setting you can select a language for the onscreen setup menus and messages. Select one of the displayed language. Disc Menu Language W ith this setting you can select your preferred language for disc menus. When you play a D VD-V ideo disc with multiple language disc menus, you[...]

49 Configuring the DPC-7.7 —Continued P arental Lock W ith the Parental Lock function you can block access to certain scenes that the authors hav e flagged as being unsuitable for children. To use parental lock, you must set a security code. Notes: • When entering a security code, you can use the [CLR] button to delete the numbers entered so [...]

50 Configuring the DPC-7.7 —Continued This menu appears automatically the very first time you turn on the DPC-7.7. See “First T ime Setup” on page 24 for more information. TV Shape—see page 45 HDMI Output Setting—see page 46 On-Screen Language—see page 48 This section explains ho w to select other languages for disc menus, audio, and [...]

51 Tr oub leshooting Symptom P ossible cause Remedy Can’t turn on the DPC-7.7? The power cord is not connected. Connect the power cord to a suitable w all outlet (page 24). External interference is affecting the DPC-7.7’ s digital circuitry . T urn off the DPC-7.7, wait five seconds, then try turning it on again. If that fails, disconnect the [...]

52 Tr oubleshooting —Contin ued Symptom P ossible cause Remedy No sound? No Digital Audio Output? The Digital/HDMI Audio Out setting is set to Off. Change the Digital/HDMI Audio Out setting to either All or PCM (page 47). Y our TV or A V receiver doesn’ t support Dolby Digital. Change the Digital/HDMI Audio Out setting to PCM (page 47). Y our T[...]

53 Tr oubleshooting —Contin ued If you’ re using an HDMI connection and there’ s no picture or sound, you can check the status of the HDMI connection by pressing and holding down the DPC-7.7’ s [Display] button for 10 seconds until a message ID appears on the display . Look up the message ID in the following tables and check the HDMI connec[...]

54 Specifications Specifications and features subject to change without notice. Signal system Standard NTSC Frequency response D VD linear audio 4 Hz–22 kHz @ 48 kHz sampling rate 4 Hz–44 kHz @ 96 kHz sampling rate CD audio 4 Hz–20 kHz (44.1 kHz) Signal-to-noise ratio 95 dB Audio d ynamic range 95 dB T otal harmonic distortion 0.007% (1 kHz[...]

55 Memo[...]

56 SN 29344219 (C) Copyright 2006 ONKY O CORPORA TION Japan. All rights reser ved. I0608-1 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.: 2-1, Nisshin-cho, N[...]