Español dropdown-ico

Intel ATX BX2 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Intel ATX BX2. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Intel ATX BX2 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Intel ATX BX2 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Intel ATX BX2, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Intel ATX BX2 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Intel ATX BX2
- nombre de fabricante y año de fabricación del dispositivo Intel ATX BX2
- condiciones de uso, configuración y mantenimiento del dispositivo Intel ATX BX2
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Intel ATX BX2 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Intel ATX BX2 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Intel en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Intel ATX BX2, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Intel ATX BX2, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Intel ATX BX2. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    CHAPTER 1 INTRODUCTION 1-1 Chapter 1 INTRODUCTION The A TX BX2 mainboard is a high-performance dual-processor personal computer mainboard based on the Intel ® Pentium ® II processor . The Intel ® Pentium ® II processor supports MMX TM (Multimedia Extension) technology . The mainboard uses the highly integrated Intel ® 82440BX chipset to suppor[...]

  • Página 2

    CHAPTER 1 INTRODUCTION 1-2 1.1 Mainboard Features CPU l T wo Slot 1 for Intel ® Pentium ® II processor . l Supports FSB 66MHz for 233MHz, 266MHz, 300MHz, 333MHz and higher . FSB 100MHz for 350MHz, 400MHz, 450MHz, 500MHz and higher Chipset l Intel ® 82440BX AGP chipset. Clock Generator l 66.6MHz/100MHz clocks are supported. Main Memory l Supports[...]

  • Página 3

    CHAPTER 1 INTRODUCTION 1-3 On-Board Dual Channel Ultra Wide SCSI l Adaptec ® 7895 Dual Channel Ultra W ide chipset. On-Board Peripherals l On-Board Peripherals include: - 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes. - 2 serial ports (COMA + COMB) or 1 serial port and 1 IrDA port. - 1 parallel port supports SPP/EPP/ECP [...]

  • Página 4

    CHAPTER 1 INTRODUCTION 1-4 1.2 Mainboard Layout MS-6120 DIMM 1 Top: mouse Bottom: keyboard Top: Port 1 USB Top: LPT Bottom: COM A COM B DIMM 2 DIMM 3 DIMM 4 ISA SLOT 1 PCI SLOT 4 PCI SLOT 3 PCI SLOT 2 PCI SLOT 1 SLOT 1 ISA SLOT 2 FDC BATT + IDE2 IDE1 Hardware Monitor AT X Power Supply BIOS FW82371EB JFP1 JIPWR CSFAN1 CFAN1 IR1 PSFAN1 FW82443BX AGP [...]

  • Página 5

    CHAPTER 2 HARDWARE INST ALLA TION 2-1 Chapter 2 HARDW ARE INST ALLA TION 2.1 Central Processing Unit: CPU The mainboard operates with Intel ® Pentium ® II processor with MMX TM technology . The mainboard uses a CPU Slot called Slot 1 for easy CPU installation and a DIP switch (SW1) to set the proper speed for the CPU. The CPU should always have a[...]

  • Página 6

    CHAPTER 2 HARDWARE INST ALLA TION 2-2 2.1-1 CPU Installation Procedures A. OEM Pentium ® II processor Installation Procedures There are two kinds of Pentium ® II processor that is currently used: the OEM Pentium ® II processor and the Boxed Pentium ® II processor . OEM Pentium ® II processor has no Heat Sink, Fan and Heat Sink Support, while t[...]

  • Página 7

    CHAPTER 2 HARDWARE INST ALLA TION 2-3 *Heat Sink Support Pin (HSSPIN) - Plastic pins inserted through the HSSBASE to secure it to the mainboard (2 required per Assembly). *Heat Sink Support T op Bar (HSSTOP) - Plastic bar that clips onto the HSSBASE through the fins on the A TX heatsink. **Heat Sink w/ fan - Heat Sink that can be attached to the Pe[...]

  • Página 8

    CHAPTER 2 HARDWARE INST ALLA TION 2-4 SLOT1 Retention Mechanism ê ê Key ê ê Retention Mechanism Attach Mount Notch Key Step 1: Insert the Retention Mechanism Attach Mount at the bottom of the mainboard. Step 2: Install the Retention Mechanism. Look for the key on Slot 1, and match it with the Notch Key on the Retention Mechanism for proper dire[...]

  • Página 9

    CHAPTER 2 HARDWARE INST ALLA TION 2-5 Step 3: Install the Heat Sink Support Base. Look for the T wo holes across Slot 1, and match it with the T wo legs of the Heat Sink Support Base for the proper direction. T ake note that one hole/leg is bigger than the other . The Four top pins of the Heat Sink Support Base should also be oriented towards Slot [...]

  • Página 10

    CHAPTER 2 HARDWARE INST ALLA TION 2-6 Step 5: Install the Heat Sink with Fan to the Processor . Push down the metal clips, so that they are in line with the back of the Heat Sink. Be careful, so as not detach the metal clips from the Heat Sink. In case the metal clips are detached from the Heat Sink, re-attach them. Look for the arrow on the metal [...]

  • Página 11

    CHAPTER 2 HARDWARE INST ALLA TION 2-7 Step 6: Install the Processor . Unlock the Processor by pushing in the Processor Locks. Insert the Processor like inserting a PCI or an ISA card. Step 7: Lock the Processor Locks. Secure the CPU by pulling the Processor Locks out. è ç ç è[...]

  • Página 12

    CHAPTER 2 HARDWARE INST ALLA TION 2-8 Step 8: Install the Heat Sink Support T op Bar . Push the Heat Sink Support T op Bar to the Heat Sink Support Base, Until you hear a “click” sound. Check for a perfect fit. The installation is now complete. Heatsink Support T op Bar[...]

  • Página 13

    CHAPTER 2 HARDWARE INST ALLA TION 2-9 B. Boxed Pentium ® II processor Installation Procedures The Boxed Pentium ® II processor has a built- in Fan and Heat Sink. It also has a Heat Sink Support. So if you’re going to use the Boxed processor , all you need is the Retention Mechanism. SLOT1 Retention Mechanism ê ê Key ê ê Retention Mechanism [...]

  • Página 14

    CHAPTER 2 HARDWARE INST ALLA TION 2-10 Step 3: Install the Heat Sink Support Base. Look for the 2 holes across Slot 1, and match it with the 2 Heat Sink Support Base. T ake note that one hole/base is bigger than the other . Push the Heat Sink Support Base onto the mainboard, until you hear a click sound. Check for a perfect fit. PC-3742 Retention M[...]

  • Página 15

    CHAPTER 2 HARDWARE INST ALLA TION 2-11 PC-3743 Heat Sink Support Lock Intel ® Boxed Pentium TM II Processor Step 4: Install the Heat Sink Support. Attach the 2 Heat Sink Supports to the sides of the Processor . These Heat Sink Supports will fit in any direction, so be sure that the Heat Sink Support Locks are oriented outwards for the proper direc[...]

  • Página 16

    CHAPTER 2 HARDWARE INST ALLA TION 2-12 PC-3744 Processor Lock Heatsink Support Lock Step 5: Unlock the Processor Locks and Heat Sink Support Locks. Push in the Processor Locks. Open the Heat Sink Support Locks. Step 6: Insert the Processor like inserting a PCI or an ISA card.[...]

  • Página 17

    CHAPTER 2 HARDWARE INST ALLA TION 2-13 PC-3745 Step 7: Lock the Processor Locks and Heat Sink Support Locks Secure the CPU by pushing out the Processor Locks. Close the Heat Sink Support Locks. The installation is now complete.[...]

  • Página 18

    CHAPTER 2 HARDWARE INST ALLA TION 2-14 2.1-2 CPU Speed Setting: SW1 T o adjust the speed of the CPU, you must know the specifications of your CPU ( always ask the vendor for CPU spec. ). Then look at T able 2.1 (200 ~ 333MHz/300 ~ 500MHz Intel ® Pentium ® II processor) for setting. ON OFF Speed Setting SW1 T able 2.1 200 ~ 333MHz/300 ~ 500MHz Int[...]

  • Página 19

    CHAPTER 2 HARDWARE INST ALLA TION 2-15 Note: If user set pin 5 of SW1to “ON”, then the motherboard can set the 66.6MHz CPU to 100MHz FSB. Divide the CPU speed by the FSB frequency and get the closest core/ bus ratio then set pins 1 to 4 of SW1. Though the motherboard provides this function, it is not recommended because it might cause instabili[...]

  • Página 20

    CHAPTER 2 HARDWARE INST ALLA TION 2-16 2.1-4 Fan Power Connectors: CF AN1/CF AN2/CSF AN1/ P S F AN 1 These connectors support system cooling fan with +12V . It supports three pin head connector . When connecting the wire to the connector , always take note that the red wire is the positive and should be connected to the +12V , the black wire is Gro[...]

  • Página 21

    CHAPTER 2 HARDWARE INST ALLA TION 2-17 2.2 Clear CMOS Jumper: JBA T 1 A battery must be used to retain the mainboard configuration in CMOS RAM. Y ou must short 1-2 pins of JBA T1 to keep the CMOS data. Keep Data Clear Data 1 1 3 3 JBA T1 Note: Y ou can clear CMOS by shorting 2-3 pin, while the system is off. Then, return to 1-2 pin position. T o be[...]

  • Página 22

    CHAPTER 2 HARDWARE INST ALLA TION 2-18 2.3 Power On Mode Jumper: JIPWR The mainboard supports two kinds of system boot up: the Boot-Up by switch and the Immediate Boot-Up. W ith the Boot-Up by Switch, the system will boot up only when the power on switch is pressed. For Immediate Boot- Up, the system will boot up instantly when the power connector [...]

  • Página 23

    CHAPTER 2 HARDWARE INST ALLA TION 2-19 JIPWR Select Boot-Up by Swtich Select Immediate Boot-Up Feature T able 2.3: Power On Mode Feature Note: Short JIPWR , when using Boot-Up by Switch feature. Open JIPWR , to enable Immediate Boot-Up.[...]

  • Página 24

    CHAPTER 2 HARDWARE INST ALLA TION 2-20 2.4 Memory Installation 2.4-1 Memory Bank Configuration The mainboard supports a maximum of 1 GB memory for registered DIMM and 512MB for unbuffered DIMM: It provides four 168-pin DIMMs (Double In-Line Memory Module) sockets. It supports 8 MB to 256 Mbytes DIMM memory module. DIMM4(Bank6 + Bank7) DIMM2(Bank2 +[...]

  • Página 25

    CHAPTER 2 HARDWARE INST ALLA TION 2-21 A. How to install a DIMM Module 1. The DIMM slot has a two Notch Key “VOL T and DRAM”, so the DIMM memory module can only fit in one direction. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in. 3. The plastic clip at the side of the DIMM slot will automatically close. Single [...]

  • Página 26

    CHAPTER 2 HARDWARE INST ALLA TION 2-22 1 . Supports SDRAM. 2. Supports registered/unbuffered DIMM. 3 . T o operate properly , at least one 168-pin DIMM module must be in- stalled. 4. This mainboard supports T able Free memory , so memory can be installed on DIMM1, DIMM2, DIMM 3, or DIMM 4 in any order . 5. Supports only 3.3 volt DIMM. 6. The DRAM a[...]

  • Página 27

    CHAPTER 2 HARDWARE INST ALLA TION 2-23 2.5 Case Connector: JFP1 The Power Switch, Reset Switch, Key Lock, Power LED, Speaker and HDD LED are all connected to the JFP1 connector block. JFP1 Power Switch Power LED + Reset Switch HDD LED 9 1 10 14 15 18 + Keylock Speaker[...]

  • Página 28

    CHAPTER 2 HARDWARE INST ALLA TION 2-24 2.5-1 Power Switch Connect to a 2-pin push button switch. This switch had the same feature with JRMS1. 2.5-2 Reset Switch Reset switch is used to reboot the system rather than turning the power ON/ OFF . A void rebooting while the HDD LED is lit. Y ou can connect the Reset switch from the system case to this p[...]

  • Página 29

    CHAPTER 2 HARDWARE INST ALLA TION 2-25 2.6 Floppy Disk Connector: FDC The mainboard also provides a standard floppy disk connector FDC that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector support the provided floppy drive ribbon cables. FDC 1[...]

  • Página 30

    CHAPTER 2 HARDWARE INST ALLA TION 2-26 2.7 Hard Disk Connectors: IDE1 & IDE2 The mainboard has a 32-bit Enhanced PCI IDE Controller that provides PIO mode 0~4, Bus Master , and Ultra DMA/33 function. It has two HDD connec- tors IDE1 (primary) and IDE2 (secondary). Y ou can connect up to four hard disk drives, CD-ROM, 120MB Floppy and other devi[...]

  • Página 31

    CHAPTER 2 HARDWARE INST ALLA TION 2-27 2.8 Power Supply 2.8-1 A TX 20-pin Power Connector: JPWR1 This connector supports the power button on-board. Using the A TX power supply , functions such as Modem Ring W ake-Up and Soft Power Off are supported by this mainboard. AT X Power Connector 11 20 10 1 PIN SIGNAL 1 1 3.3V 1 2 -12V 13 GND 1 4 PS_ON 15 G[...]

  • Página 32

    CHAPTER 2 HARDWARE INST ALLA TION 2-28 2.8-2 Remote Power On/Off Switches: JRMS1/JRMS2 Connect to a 2-pin push button switch. If Instant-on is Enabled, every time the switch is shorted by pushing it once, the power supply will change its status from OFF to ON. If Instant-on is Disabled: During ON stage, push once and the system goes to sleep mode: [...]

  • Página 33

    CHAPTER 2 HARDWARE INST ALLA TION 2-29 2.9 IrDA Infrared Module Connector: IR1 The mainboard provides two 5-pin infrared (IR) connectors for IR modules. These connectors are for optional wireless transmitting and receiving infrared module. Y ou must configure the setting through the BIOS setup to use the IR function. FIR and Consumer IR are reserve[...]

  • Página 34

    CHAPTER 2 HARDWARE INST ALLA TION 2-30 2.10 Serial Port Connectors: COM A & COM B The mainboard has two 9-pin male DIN connectors for serial ports COM A and COM B. These two ports are 16550A high speed communication ports that send/receive 16 bytes FIFOs. Y ou can attach a mouse or a modem cable directly into these connectors. 1 2 3 4 5 6 7 8 9[...]

  • Página 35

    CHAPTER 2 HARDWARE INST ALLA TION 2-31 2.11 Parallel Port Connector: LPT The mainboard provides a 25 pin female centronic connector for LPT . A parallel port is a standard printer port that also supports Enhanced Parallel Port(EPP) and Extended capabilities Parallel Port(ECP). See connector and pin definition below: PIN SIGNAL PIN SIGNAL 1 STROBE 1[...]

  • Página 36

    CHAPTER 2 HARDWARE INST ALLA TION 2-32 2.12 Mouse Connector: JKBMS1 The mainboard provides a standard PS/2 ® mouse mini DIN connector for attaching a PS/2 ® mouse. Y ou can plug a PS/2 ® mouse directly into this connector . The connector location and pin definition are shown below: PS/2 ® Mouse (6-pin Female) 2.13 Keyboard Connector: JKBMS1 The[...]

  • Página 37

    CHAPTER 2 HARDWARE INST ALLA TION 2-33 2.14 USB Connector: USB The mainboard provides a UHCI(Universal Host Controller Interface) Universal Serial Bus root for attaching USB devices like: keyboard, mouse and other USB devices. Y ou can plug the USB device directly to this connector . USB Port 1 USB Port 2 1 2 3 4 PIN SIGNAL 1 VCC 2 -Data0 3 GND 4 +[...]

  • Página 38

    CHAPTER 2 HARDWARE INST ALLA TION 2-34 2.15 Sleep Switch Connector: JGS1 Attach a power saving switch to JGS1. When the switch is pressed, the system immediately goes into sleep mode. Press any key and the system wakes up. JGS1 GND SLEEP#[...]

  • Página 39

    CHAPTER 2 HARDWARE INST ALLA TION 2-35 2.16 Sleep LED Connector: JGL1 Connect a 2-pin LED to JGL1. When the system goes into sleep mode, the LED lights up. It is always lit while the system is in sleep mode. LED- LED+ JGL1[...]

  • Página 40

    CHAPTER 2 HARDWARE INST ALLA TION 2-36 JMDM1 2.17 Modem W ake Up Connector: JMDM1 The JMDM1 connector is for used with Modem add-on card that supports the Modem W ake Up function. Note: Modem wake-up signal is active “low”. 1 5 PIN SIGNAL 1N C 2 GND 3 MDM_WAKEUP 4N C 5 5VSB Note: T o be able to use this function, you need a power supply that pr[...]

  • Página 41

    CHAPTER 2 HARDWARE INST ALLA TION 2-37 2.18 W ak e-Up on LAN Connector: JWOL1 The JWOL1 connector is for use with LAN add-on cards that supports W ake Up on LAN function. JWOL1 1 3 PIN SIGNAL 1 5VSB 2 GND 3 MP_WAKEUP Note: LAN wake-up signal is active “high”. Note: T o be able to use this function, you need a power supply that provide enough po[...]

  • Página 42

    CHAPTER 2 HARDWARE INST ALLA TION 2-38 2.19 SB_Link TM Card Sound Connector: JSOUND The mainboard provides a distributed DMA connector for PCI sound card with this feature, such as Creative ® PCI 3D sound card. DMA Grand Signal NC GND GND DMA Request Signal Serial Interrupt Signal 1 3 4 6 JSOUND[...]

  • Página 43

    CHAPTER 2 HARDWARE INST ALLA TION 2-39 2.20 CPUs T emperature Sensor: JSOR1/JSOR2 This is used to check the CPU temperature. The JSOR1/JSOR2 is a sensor that is placed near the processor heatsink. This will monitor the CPU temperature. JSOR2 JSOR1[...]

  • Página 44

    CHAPTER 2 HARDWARE INST ALLA TION 2-40 2.21 T wo Color Power LED: JWLED1 The JWLED1 is for normal and suspend mode. But this LED produce two different colors. LED+ LED- JWLED1 The use needs to connect a 3-pin 2-color LED. Under differ- ent working modes (normal or suspend), the LED will show different colors. For example if the LED has green and ye[...]

  • Página 45

    CHAPTER 2 HARDWARE INST ALLA TION 2-41 2.22 System Manager Jumper: JSM1 The JSM1 is used to select the SMI# source. SMI# source from I/O APIC (Default) SMI# source from PIIX4E 1 1 3 3 JSM1 JSM1 3 1 Function[...]

  • Página 46

    CHAPTER 2 HARDWARE INST ALLA TION 2-42 2.23 SCSI Connectors The mainboard provides three SCSI connector . On-board 16-Bit Ultra Wide SCSI CH1 connector On-board 16-Bit Ultra Wide SCSI CH2 connector On-board 8-Bit Ultra SCSI CH2 connector 1[...]

  • Página 47

    CHAPTER 2 HARDWARE INST ALLA TION 2-43 2.24 SCSI Enable/Disable Jumper: JDSCSI This jumper is used to enable or disable the SCSI chip on-board. JDSCSI Enabled on-board SCSI Controller Disabled on-board SCSI controller Function JDSCSI[...]

  • Página 48

    CHAPTER 3 AMI ® BIOS USERS GUIDE 3-1 Chapter 3 AMI ® BIOS USER’S GUIDE The system configuration information and chipset register information is stored in the CMOS RAM. This information is retained by a battery when the power is off. Enter the BIOS setup (if needed) to modify this information. The following pages will describe how to enter BI[...]

  • Página 49

    CHAPTER 3 AMI ® BIOS USERS GUIDE 3-2 2 . When the “Hit <DEL>” message appears, press <DEL> key to enter the BIOS setup screen. 3 . After pressing <DEL> key , the BIOS setup screen will appear . AMIBIOS (C) 1996 American Megatrends Inc. AGIOMS VXXX XXXXXX Hit <DEL> if you want to run setup (C) American Megatrends Inc.[...]

  • Página 50

    CHAPTER 3 AMI ® BIOS USERS GUIDE 3-3 Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup PCI/Plug and Play Setup Peripheral Setup Hardware Monitor Setup (optional) Auto-Detect Hard Disks Change User Password Change Supervisor Password Change Language Setting Auto Configuration with Optimal Settings Auto Configu[...]