Intel Intel P35/P31 Socket LGA775 Processor Mainboard manual

User’s Manual Intel P35/P31 Socket LGA775 Processor Mainboard P3 Series Rev: 1.00, Nov 2007 P/N: 88ENEP3S00[...]

Disclaimer The intellectual property of this manual belongs to our company . The ownership of all of the products, including accessories and softw are etc. belong to our company . No one is permitted to copy , change, or translate without our written permission. W e compiled this manual based on our careful attitude, but we can not guarantee the ac[...]

Table of Contents Chapter 1 Introduction .................................................................... 3 1.1 Package Checklist .......................................................................................... 3 1.2 Specications ................................................................................................. 4 1.3[...]

Chapter 1 Introduction 1.1 Package Checklist Thank you for choosing our product. Please check the following packing and accessories, if there is any br oken or part missing, Please contact with your franchiser . • Mainboard x 1 • HDD Cable X 1 • Serial A T A Cable X 1 • Rear I/O P anel X 1 • User's Manual X 1 • Driver/Utility CD X [...]

- 4 - P3 Series User's Manual CPU - LGA775 socket for I ntel ® Core™2 Extreme/ Core™2 Quad/ Core™ 2 Duo/ Pentium ® Dual Cor e/ Pentium ® D/P entium ® 4 (800MHz FSB)/Celeron ® (Conroe-L) Processors - FSB 1333MHZ/1066MHz/800MHz - Hyper Threading T echnology Chipset - Based on Intel P35 + ICH9 - ICH9: Intel FW82801IB Main Memory - 4x 2[...]

- 5 - P3 Series User's Manual 1.2 Specications -2 (For IP35-S) CPU - LGA775 socket for I ntel ® Core™2 Extreme/ Core™2 Quad/ Core™ 2 Duo/ Pentium ® Dual Cor e/ Pentium ® D/P entium ® 4 (800MHz FSB)/ Celeron ® (Conroe-L) Processors - FSB 1333MHZ/1066MHz/800MHz - Hyper Threading T echnology Chipset - Based on Intel P35 + ICH9 - ICH[...]

- 6 - P3 Series User's Manual 1.2 Specications -3 (For IP31-CF) CPU -LGA775 socket for I ntel ® Core™2 Extreme/ Core™2 Quad/ Core™ 2 Duo/ Pentium ® Dual Cor e/ Pentium ® D/P entium ® 4 (800MHz FSB)/Celeron ® (Conroe-L) Processors - FSB 1333MHZ/1066MHz/800MHz - Hyper Threading T echnology Chipset - Based on P31 + ICH7 - ICH7: Inte[...]

- 7 - P3 Series User's Manual 1.3 Mainboard Layout -1 (PCB Layout for IP35-PRO) (This picture is only for reference) BAK_BIOS USR_BIOS[...]

- 8 - P3 Series User's Manual 1.3 Mainboard Layout-2 (PCB Layout for IP35-S) (This picture is only for reference) USR_BIOS[...]

- 9 - P3 Series User's Manual (This picture is only for reference) 1.3 Mainboard Layout-3 (PCB Layout for IP31-CF) 1 SFAN2 SFAN1 VGA JDDR1[...]

- 10 - P3 Series User's Manual 1.4 Connecting Rear Panel I/O Devices The rear I/O part of this mainboard provides the f ollowing I/O ports: I/O Panel --1 (F or IP35-PRO) I/O Panel --2 (F or IP35-S) I/O Panel --2 (F or IP31-CF) COM Debug LED COM Debug LED (Optional) COM Debug LED (Optional)[...]

- 1 1 - P3 Series User's Manual • PS/2 Mouse: Connect to PS/2 mouse. • PS/2 Keyboard: Connect to PS/2 keyboard. • COM: Co nnect to ex ternal mod el, mouse or other devices tha t support this comm unication protocol. • Debug LED: Display error code. (please refer ence appendix 1) • SPDIF IN: This connector provides an SPDIF-I n connec[...]

- 12 - P3 Series User's Manual Chapter 2 Hardware Setup 2.1 Choosing a Computer Chassis • Choose a chassis big enough to install this mainboard. • As some features for this mainboard ar e implemented by cabling connectors on the mainboard to indicators and switches or buttons on the chassis, make sure y our chassis supports all the feature[...]

- 13 - P3 Series User's Manual 2.3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the mainboard supports the CPU . 2. Please tak e note of the one indente d corner of the CPU. If you install the C PU in the wrong direction, the CPU will not insert properly[...]

- 14 - P3 Series User's Manual 2.3.2 Installation of the CPU Cooler For pr oper installation, please kindly refer to the instruction manuals of your CPU Cooler . 2.4 Installation of Memory Modules This mainboard provides f our 240-pin DDRII (Double Data Rate) DIMM slots, and supports Dual Channel Memory T echnology . For dual channel congur[...]

- 15 - P3 Series User's Manual 2.5 Connecting Peripheral Devices 2.5.1 Floppy and IDE Disk Drive Connectors The FDD connector connects up to two oppy drives with a 34-wire, 2-connector oppy cable.Connect the single end at the longer length of ribbon cable to the FDD on the board, the two connectors on the other end to the oppy disk dr[...]

- 16 - P3 Series User's Manual Chapter 3 Jumpers & Headers Setup 3.1 Checking Jumper Settings • For a 2-pin jumper , plug the jumper cap on both pins will make it CLOSE (SHOR T ). Remove the jumper cap, or plug it on either pin (reserved f or future use) will leave it at OPEN position. • For 3-pin jumper , pin 1~2 or pin 2~3 can be sho[...]

- 17 - P3 Series User's Manual 3.4 FAN Power Connectors These connectors each provide power to the cooling fans installed in y our system. CF AN or CF AN1: CPU Fan P ower Connector SYSF AN1: System F an Power Connector SYSF AN2: System F an Power Connector (Optional) 3.5 Front Panel Switches & Indicators Headers Speak er HDD_LED (Hard Driv[...]

- 18 - P3 Series User's Manual 3.6 Additional USB Port Headers 3.7 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. Pin Pin Assignment Pin Pin Assignment 1 VCC 2 VCC 3 D - 4 D - 5 D + 6 D + 7 GND 8 GND 9 NC 10 KEY HD Audio: Pin No. Denition 1 MIC2_L 2 AGND 3 MIC2_R 4 NC 5 OUT_R 6 MIC[...]

- 19 - P3 Series User's Manual 3.8 Internal Audio Connectors Connect CD-ROM or DVD-ROM audio out to the connector . 3.9 ATX Power Input Connectors This mainboard provides two power connectors to connect power supplier . Pin No. Denition 1 CD-L 2 GND 3 GND 4 CD-R BAK_BIOS USR_BIOS ATX 8Pin ATX 4Pin(Optional for JW-IP31-CF) BAK_BIOS USR_BIOS[...]

- 20 - P3 Series User's Manual Chapter 4 BIOS Setup Utility BIOS stands for B asic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory (ROM) chip . Now manu fac tu rer s woul d like to stor e BIOS i n EEPROM which means Electrically Erasable Programmable Memory . BIOS used in this s eries of mainboard [...]

- 21 - P3 Series User's Manual Phoenix - AwardBIOS CMOS Setup Utility ► Standard CMOS Features ► Advanced BIOS Features ► Advanced Chipset Features ► Integrated Peripherals ► Power Management Setup ► PnP/PCI Configurations ► PC Health Status ► Frequency/Voltage Control Load Fail-Safe Defaults Load Optimized Defaults Set Supervi[...]

- 22 - P3 Series User's Manual • PC Health Status This setup page is the System auto detect temper ature, voltage, fan, speed. • Frequency/Voltage Control This setup page is control CPU clock and frequency r atio. • Load Fail-Safe Defaults F ail-Safe Defaults indicates the value of the system par ameters which the system would be in safe[...]

- 23 - P3 Series User's Manual 4.5.3 Standard CMOS Features ・ Date (mm:dd:yy) This item sets the date you specify (usually the current date) in the f ormat of [Month], [Date],and [Y ear]. ・ Time (hh:mm:ss) This item sets the time you specify (usually the current time) in the f ormat of [Hour], [Minute],and [Second]. ► IDE Channel 0 Maste[...]

- 24 - P3 Series User's Manual IDE HDD Auto-Detection This item allows you to detect the par ameters of IDE drives by pressing <Enter> key . The parameters will be shown on the screen automatically . IDE Channel 0 Master/Slave,SATA Channel 1~4 When set to [Auto], the BIOS will automatically check what kind of IDE or SA T A hard drive you[...]

- 25 - P3 Series User's Manual Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features ► Hard Disk Boot Priority Virus Warning CPU L3 Cache Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option Typematic Rate Setting x Typematic Rate [...]

- 26 - P3 Series User's Manual ・ First Boot Device/Second Boot Device/Third Boot Device/Boot Other Device Select the drive to boot rst, second and third in the [First Boot Device], [Second Boot Device], and [Third Boot Device] items respectively . The BIOS will boot the operating system according to the sequence of the drive selected. Set[...]

- 27 - P3 Series User's Manual 4.5.5 Advanced Chipset Features Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features System BIOS Cacheable Memory Hole At 15M-16M ► PCI Express Root Port Func ** VGA Setting ** PEG Force x1 On-Chip Frame Buffer Size DVMT Mode DVMT/FIXED Memroy Size [ ] [Disabled] [Press Enter] [Disabled] [ 8MB] [DVM[...]

- 28 - P3 Series User's Manual ► OnChip IDE Device Click <Enter> key to enter its submenu: IDE HDD Block Mode Enable this eld if your IDE hard drive supports block mode. Block mode enables BIOS to automatically detect the optimal number of block read and writes per sector that the drive can support. It also improves the speed of ac [...]

- 29 - P3 Series User's Manual IDE Primary Master/Slave UDMA (Auto) Each IDE channel supports a master device and a slave device. This mainboard supports UltraDMA technology , which provides faster access to IDE devices. If you install a device that supports UltraDMA, change the appropriate item on this list to Auto . Y ou may have to install [...]

- 30 - P3 Series User's Manual Onboard PCIE Lan Controller This option enables or disables the LAN controller . BIOS Write Protect This option enables or disables the BIOS Write Protect f unction. Azalia Audio Select This options allows you choose Azalia audio or AC97 audio. • Back to Integrated Peripherals Setup Menu ► Super IO Device Cli[...]

- 31 - P3 Series User's Manual Onboard Parallel Port This item species the I/O address used by the parallel port. [Disabled]: This option prevents the par allel port from accessing any system resources. When the value of this option is set to [Disabled], the printer port becomes unavailable. [378/IRQ7]: This option allows the parallel port [...]

- 32 - P3 Series User's Manual 4.5.7 Power Management Setup ・ ACPI Function This item allows you to Enabled/Disabled the Adv anced Conguration and P ower Management (ACPI). ・ ACPI Suspend Type This item allows you to select ACPI Suspend T ype. ・ Power Management This option is for choose ACPI mode (or gr ade) etc. Min Saving If system[...]

- 33 - P3 Series User's Manual ・ Video off Method ・ Video Off In Suspend This determines the manner in which the monitor is blanked. The choices are Y es Video will off and No Video always on. ・ Suspend Type This item allows you to select ACPI Suspend T ype. ・ MODEM Use IRQ This determines the IRQ in which the MODEM can use. Default op[...]

- 34 - P3 Series User's Manual 4.5.8 PnP PCI Conguration ・ Init Display First This setting species which graphics car d is your primary graphics adapter . W e suggest you to keep the def ault setting. ・ Reset conguration data Usually you'd better keep this set ting [Disabled]. ・ Resource controlled by The plug and play bios[...]

- 35 - P3 Series User's Manual 4.5.9 PC Health Status ・ FAN Mode Setting This item allows you to set the CPU fan states. When set to [Full on mode], the f ollowing items become selectable. ・ All Voltages, Fans Speed and Thermal Monitoring These unchangeable items list the current status of the CPU and environment temperatures, f an speeds,[...]

- 36 - P3 Series User's Manual 4.5.10 Frequency/Voltage Control ・ CPU Feature Click <Enter> key to enter its submenu. Y ou may manually set the CPU timing parameters through its sub-items. ・ Ajust Cpu Voltage This option is for setting the v oltage of CPU. ・ Ajust DRAM Voltage This option is for setting the v oltage of DIMM. ・ Aj[...]

- 37 - P3 Series User's Manual Load Fail-Safe Defaults (Y/N)? N 4.5.11 Load Fail-Safe Defaults This option opens a dialog box that lets you install f ail-safe defaults for all appr opriate items in the Setup Utility: Press <Y> and the <Enter> to install the defaults. Pr ess <N> and then <Enter> to not install the defaul[...]

- 38 - P3 Series User's Manual SAVE to CMOS and EXIT (Y/N)? Y Quit Without Saving (Y/N)? Y T o disable password, just press <Enter> when you are prompted to enter password. A message will conrm the password being disabled. Once the password is disabled, the system will boot and you can enter BIOS Setup freely . PASSWORD DISABLED ！ ?[...]

- 39 - P3 Series User's Manual Chapter 5 Driver Installation Check your package and there is Driver CD included. This CD consists of all dirvers you need. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which drivers needed so that your system can function pr operly . Insert CD into[...]

- 40 - P3 Series User's Manual When you choose Mainboard Driver installation Utility , the drivers menu should appear as below: (This picture is only for ref erence) From the Drivers MENU you ma y make 3 selections: 1. Intel Chipset Installtion Utility 2. Marvell (or Realtek) LAN Driver 3. Realtek Audio Driver Back <- INTEL Chipset Installa[...]

- 41 - P3 Series User's Manual APPENDIX 1 POST Codes NOTE: EISA POST codes ar e typically output to port address 300h. ISA POST codes are output to port address 80h. Code (hex) Name Description C0 T urn Off Chipset Cache OEM Specic-Cache control 1 Processor T est 1 Processor Status (1FLAGS) V erication. T ests the following processor sta[...]

- 42 - P3 Series User's Manual 9 Early Cache Initialization Cyrix CPU initialization. Cache initialization. A Se tup Interrupt V ector Initialize rst 120 interru p tvector s with SPURIOUS_ INT_HDLR T able and initialize INT 00h-1Fh accor ding to INT_TBL. B T est CMOS RAM T est CMOS RAM Checksum, if bad, or insert key pressed, Checksum load [...]

- 43 - P3 Series User's Manual 21-2F Enable Slots 1-15 Initialize slots 1 through 15. 30 Size Base and Extended Size base memory from 256K to 640K and extended memory Memory abov e 1MB. 31 T est Base and Ext ended T est base memory from 256K to 6 40K and extended mem ory Memory abov e 1MB using various patterns. NO TE: This test is skipped in [...]

- 44 - P3 Series User's Manual 4E Manufacturing POST R eboot if Manufacturing POST Loop pin is set. Otherwise Loop or Display display an y messages (i.e. , any non-fatal errors that were Messages detected during POST) and enter Setup. 4F Security Check Ask password security (optional). 50 Write CMOS W rite al l CMOS values back to RAM and clea[...]