IOGear m1281 manual

www .iogear .com User Manual Wireless 1080p Computer to HD Display Kit GUWA VKIT4B P ART NO. M1281[...]

© 2014 IOGEAR ® Part No. M1281 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR makes no warranty of any kind with regards to the informa[...]

3 T able of Contents Introduction 4 Package Contents 4 Requirements 4 Overview 5 Software Installation - Windows 6 Hardware Installation 9 Using the IOGEAR Wireless Software - Windows 11 1. Introducing the UWB Connection Manager Software 11 2. Adjusting Video Settings 14 3. Adjusting Audio Settings 18 T roubleshooting 20 Specications 25 Federal [...]

4 Package Contents Requirements 1 x Wireless A / V Receiver 1 x Wireless USB T ransmitter 1 x Power Adapter 1 x User Manual 1 x W arranty / Registration Card 1 x Installation CD PC: • Intel 2.2GHz processor (2.4GHz Recommended) with 2GB (3GB Recommended) of system memory (RAM) • Windows ® 7, Windows ® 8.x • Graphics Chipsets Suppor[...]

5 Overview Receiver Base Front View 1. Signal Indicator Light 2. Wireless Connection LED light Receiver Base Back View 1. DC Power Input 2. HD Port 3. D-Sub 15Pin (VGA) 4. 3.5mm Audio Out 5. USB 2.0 Port 6. Antenna PC Adapter 1. USB 2.0 Connector 1 1 1 2 3 4 6 5 2[...]

6 Software Installation - Windows The installation checks the PC capabilities and compares them to the minimum system requirements of the system. For Windows 7, it is recommended to run WEI (Windows Experience Index) calculation prior to installation. Before you start: Ensure that the PC Adapter is unplugged from the PC. 1. Insert the installation [...]

7 Uninstalling the Software (2) Methods: Method 1 1. In the event that you need to uninstall the software, insert the installation CD. Once the Modify Setup screen appears, click “ Uninstall .” Note: The Modify Setup screen will only appear if the GUW A VKIT4B is already installed on your PC. 2. An Operation Progress screen will appear during t[...]

8 Method 2 1. Go to your Control Panel on your PC and then select “Programs and Features” to uninstall the following program: GUW A VKIT4B .[...]

9 3. Connecting a TV , Monitor or Projector 1. Y ou can connect a digital (HD) or analog (VGA) monitor to the Receiver Base. Only one monitor can be connected to the HD Adapter at a time. 2. Connect an HD or VGA Cable to the HD or VGA port on the Receiver Base 3. Connect the other end of the cable to the TV , Projector or external monitor [...]

10 4. Connecting Audio Devices 1. The Wireless USB Device Adapter provides one 3.5mm port, as shown in the illustration on the last page. 5. Set-Up Complete 1. The default conguration for the external monitor connected to the Receiver Base is in the Extend mode (an extension of the image on the computer to a second screen). 2. When the [...]

11 This section provides information on using the following software to manage the IOGEAR Wireless Software to adjust settings to suit your needs: 1. UWB Connection Manager 2. Adjusting Video Settings 3. Adjusting Audio Settings Using the IOGEAR Wireless Software - Windows A. Accessing the UWB Connection Manager T o start the UWB Connection Manager[...]

12 B. Connecting the GUW A VKIT4B to your computer: The UWB Connection Manager display window will show the GUW A VKIT4B on the Devices tab as Not Connected. Simply click on the Connect button to establish a connection. It will take approximately 15 seconds for the Drivers to load upon rst connection. When the wireless connection has been made, [...]

13 E. Radio Communications T o change / select the channel used for radio communication: The Communications tab of the UWB Connection Manager enables you to view and change the radio settings. The default channel setting is Automatic, which enables the host radio to automatically locate an available channel for communications. Note: It is recommend[...]

14 2. Adjusting Video Settings A. Selecting Extended mode or Mirror mode Y ou can choose to set the video output signal to Extend mode or Mirror mode. The default setting is Extend mode. Extend mode extends your desktop space across multiple monitors, so that you can display different information on each monitor connected to your computer . This pr[...]

15 B. Conguring the Display 1. Conguring the Display in Windows 7 a. In Windows 7, there is a built in support for external monitor . T o use it press the [Windows] key together with the [P] key( + [P]), and then the following menu will appear: 1) For Mirror mode : choose Duplicate 2) For Extend mode : choose Extend b. Using Windows Display P[...]

16 T o change any of the external display settings: Select the appropriate display name in the Display scroll down options. Y ou should select the name of the TV or monitor or projector connected to your Receiver Base. Select the desired value in any of the available settings: - Resolution: your external display resolution. - Orientation: select ei[...]

17 Select Video Setup to congure screen resolution or any other display options. The following window will appear: T o change any of the external display settings: Select the appropriate display name in the Display scroll down options. Y ou should select the name of the TV or monitor or projector connected to your Re- ceiver Base. Select the des[...]

18 3. Adjusting Audio Settings A. Conguring audio ports Y ou can playback audio either through the Receiver Base’s audio port or the PC’s audio port. However , you cannot use the audio ports on the PC and on the GUWA VKIT4B at the same time. By default, the audio ports on the GUW A VKIT4B are automatically enabled each time you connect. When[...]

19 2. In Windows 8.x: a. Right click the V olume icon in the System T ray and select Playback devices . b. In the Playback tab, select USB AUDIO speakers. c. Then click Set Default to set it as your default speakers. d. Click OK to save the new setting.[...]

20 T roubleshooting This section provides answers for problems you may encounter when using your GUW A VKIT4B. If you need to contact IOGEAR, you will nd information regarding IOGEAR’s support services at the end of this section. Before you contact IOGEAR, please read the troubleshooting advice in this manual, your computer ’ s user ’s gui[...]

21 D. The external monitor connected to the Receiver Base shows only the wallpaper background of your Windows® desktop. 1. The default conguration for the external monitor connected to the Receiver Base is in the Extend mode (an extension of the image on the computer to a second screen). 2. This mode allows you to display different information [...]

22 J. Mirror mode is not available (grayed out). 1. Mirror mode is not available if the external monitor connected to the Receiver Base is set as the primary display . 2. T o enable Mirror mode, set the computer ’s built-in display as the primary display in the Windows Display Properties dialog box. K. Scalable Link Interface (SLI) mode is not av[...]

23 A. There is no sound coming from the external audio device connected to GUW A VKIT4B. 1. Check and adjust the volume settings. 2. Make sure the cable connecting the audio device to the Receiver Base’s audio output is secure. 3. Check that the Mute all / Mute checkboxes in Microsoft® Windows® are not selected or that the volume is not set too[...]

24 A. USB device does not work. 1. Make sure the GUWA VKIT4B is connected to your computer and the computer is docked (indicator light on GUW A VKIT4B is green). 2. Check that the cable connection between the USB port on the Receiver Base and the USB device is secure. 3. Make sure that the GUWA VKIT4B drivers are properly installed. Refer to the op[...]

25 Specications Function GUW A VKIT4B Audio Audio Output 2 Channel 16-bit DAC Sample Rate 48KHz, 16-bit either from 3.5mm stereo jack or HDMI connector Console Connectors Audio 1 x 3.5mm Stereo Jack Video Streaming Up to 1080p resolution Video Resolution Up to 2048 x 1 152 (SXGA+) Video Connections Output 1 x HDMI, 1 x VGA in Mirror or Extended [...]

26 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential setting. This product generates, uses, and can radiate ra[...]

27 WE’RE HERE TO HELP YOU! NEED ASSIST ANCE SETTING UP THIS PRODUCT? Makesureyou: 1.Visit www .iogear .com formoreproductinformation 2.Visit www .iogear .com/support forlivehelpandproductsupport W arrantyInformation Thisproductcarriesa1Y earLimitedWarranty .Forthe[...]

© 2014 IOGEAR ®[...]