Jensen Mobile Multimedia DVD/MP3/WMA Receiver VM9020TS manual

VM9020TS Oper a tion Manual[...]

ii Thank you for choosing a Jensen product. We hope y ou will find the instructions in this owner ’s manual clear and easy to follow. If you t ake a few minutes to look through it, you’ll learn how to use all the features of your new Jens en VM9020TS Mobile Multimedia DVD/MP3/WMA Receiver for maximum enjoyment. Preparation .................. ..[...]

VM9020TS 1 PREPAR ATION Congratulations on your pur chase of the Jensen VM9020TS Mobile Multimedia AM/FM/DVD Receiver . It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9020TS installed by a reputable installation shop. Features • ISO Double-DIN chassis • Light weight propri[...]

VM9020TS 2 INSTALLATION This unit is designed to fit into a 2.0 DIN dashboard opening, found in many imported cars. The unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some T oyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please co[...]

VM9020TS 3 HEADPHONE MULTIZONE  HEADPHONE MULTIZONE  V OUT ,'(2  V OUT ,'(2  MILTIZONE VIDEO  MILTIZONE VIDEO  )5217/  )5217/  )52175  )52175  5($5  /  SURROUND 5($5 /  SURROUND 5($5  5  SURROUND 5($5 5  SURROUND 68%:  68%:[...]

VM9020TS 4 CONTROLS AND INDICATOR S 1. POWER/MUTE Press the POWER/MUTE button (1) once to turn the unit on. Press again to mute the volume. Press and hold to turn the unit off. 2. AUDIO/LOC Press the AUDIO/LOC button (2) to access the audio menu and change and/or confirm audio settings. Press and hold to activate or deactivate the Local (LOC) setti[...]

VM9020TS 5 CONTROLS AND INDICATOR S 21. Disc Slot 22. Eject Button • Press once to eject the disc. • Press and hold to reset the mechanism. 23. Disc Indicator 24. SD Card Slot 25. Reset Button (see page 4) .[...]

VM9020TS 6 FR ONT ZONE REMOTE CONTROL T ab l e 1: Front Zone Remote Control Fu nctions Button Function Name Ref # DVD VCD TUNER CD/MP3 MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE/ 4 Turns the power on. T oggles on/off audio outpu t[...]

VM9020TS 7 PIC 24 Displays set-up paramete rs Displays set-up parameters OPEN/ CLOSE 25 Opens/Closes t he TFT moni- tor Opens/Closes the TFT moni- tor Opens/Closes the TFT moni- tor Opens/Closes the TFT moni- tor 26 Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle Decreases monitor tilt angle 27 Increases monit[...]

VM9020TS 8 MULTI-ZONE REMOTE CONTROL T able 2: Multi-Zone R emote Control Func tions Button Funct ion Name Ref # DVD VCD MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title MUTE 3 T oggles on/off audio output T oggles on/off audio output AUDIO [...]

VM9020TS 9 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monit or Press the OPEN button (12) on the front panel or press the ( ) button (25) of the front zone remote control to open/ close the monitor . TFT Monitor Auto Open • If “TFT Auto Open” is “on” when the un it is turned on, the monitor automatically moves to the last viewi[...]

VM9020TS 10 OPERATING INSTRUCTIONS Power On / Off Press the /MUTE button (1) to turn the unit on. The buttons on the front of the unit will light up. Press and hold the /MUTE button (1) on the front panel or the POWER button (4) on the remote to power off the unit. Audible Beep C onfirmation An audible beep tone confirms each function selection. Th[...]

VM9020TS 11 SYSTEM SETUP MENU In “System Setup” mode, “ASP CONFIG” and “GENERAL SETUP” are available for adjustment. Setup can be performed by pressing the dedicated button on the remote control or by pressing the MENU/SRC button (1 1) on the front panel. For system settings, press the SYS SETUP button (31) on the remote control or touc[...]

VM9020TS 12 submenu appears in a second row with the selected option highlighted in light blue. 2. Select a new value by pressing the or buttons (14, 22) on the remote control or the or buttons (6, 7) on the joystick. 3. Confirm your selection by pressing the , , or buttons (14, 17, 19) on the remote control, or the or button (8, 9) on the joystick[...]

VM9020TS 13 T UNER OPER ATION Tuner TFT Display 1. Current Radio Band Indicator 2. Radio Frequency Indicator 3. Clock 4. S tereo Broadcasting Indicator 5. S trong Local Signal Broadcasting Indicator: T ouch and hold to activate/deactivate Local function 6. Preset Radio S t ations: T ouch to recall preset stations or touch and hold to store a statio[...]

VM9020TS 14 DVD PLAY ER OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT scre en unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “P ARKING” with a blue background. Rear video screens, if applicable, will operate normally . Opening/Closin[...]

VM9020TS 15 Fast Forward/Fast Reverse Press the button (14) on the remote control or the button (6) on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”. Continue pressing the or button to fast reverse. Scanning Press the SCN button (?) on the remote co ntrol[...]

VM9020TS 16 • 00:41:28 – “00:41:28” indicates the playback time of the current title. • 2 / 6 Eng – Th e lang uage display information indicates the second language out of 6 (English) is currently being used. The following information appears at the bottom of the screen during DVD playback: • Front: DVD is the current playback source [...]

VM9020TS 17 DVD SE TU P M EN U In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO” “SURR SETUP”, “SURROUND FX”, and “RAT ING” (parental lock) are available for setup. T his operation can be performed using the remote control or joystick controls. Accessing the DVD Setup Screen Setup can be performed by pressing the dedicat[...]

VM9020TS 18 AUDIO Menu The VM9020TS has a built-in Pink Noise generator to help set the relative speaker le vels for multi-channe l audio playback. NOTE: When Down Sampling is ON, the audio outpu t signal will be converted to 48kHz. When Down Sampling is OFF , the original sampling freque ncy is preserved. SURR SETUP Menu T o change speaker setting[...]

VM9020TS 19 NOTE: When Surround I Music mode is s elected , Dimension Control and Center Width are availab le for fine tuning to achieve a more realistic surround sound processing. RATING (Parental Lock) Menu The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rat[...]

VM9020TS 20 CD/MP3/WMA OPERATION Instructions for Insert/Eject, Play/Pause, Stopping Playback, T rack Selection, F ast Forward/Fast Reverse, Scan, and Random Play are the same for DVD, CD and MP3 operation. Please see the DVD Player Oper ation section for information about these topics. NOTE: CD-R and CD-RW will not play unless the recording sessio[...]

VM9020TS 21 SD CARD READER OPER ATION Accessing SD Card Mode T o switch to SD card mode, press the SD button (19) on the front panel. Using the Touch- Screen Controls The touch keys for SD card playback are described below. • : Play/Pause playback • : Stop playback • P AGE -: View previous page • P AGE +: View next page • DIR -: View prev[...]

VM9020TS 22 TV TUNER OPERATION Accessing TV Mode T o switch to TV mode, press the TV button (16) on the front panel or press the SRC button (8) on the remote control until TV appears at the bottom of the screen. NOTE: Touch the top left corner to access the MAIN MENU Multi-ZONE SETUP menu and the top right corner to access the Multi-ZONE menu (re a[...]

VM9020TS 23 T R OUBLESHOOTING T able 18 : T rou bleshooting Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with cor rect rating Illegal operation Press the RESET button located in the bot tom right corner of the front panel Remote control d[...]

VM9020TS 24 Error Messages Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor . A rough cloth and non- neutral detergent (such as alcohol) may resu lt in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature inside the player gets too hot[...]

VM9020TS 25 SPECIFICATIONS CEA Power Ratings Main Amplifier Power Output: 18 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference. (Reference: 1 watt, 4-ohms) Dynamic Power: 88 watts into 4-ohms, all channels driven Frequency Response: 20Hz to 20kHz, - 3dB. Aux input used as source reference Reference Supp[...]

VM9020TS 26 12-MONTH LIMITED WARR ANTY AUDIOVOX CORPORA T ION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such def ect(s) will be repaired or r[...]