Jonsered HTE2123 manual

Oper ator ′ s manual Please read the oper ator’ s manual carefully and make sure y ou understand the instructions before using the machine .[...]

2 – English KEY T O SYMBOLS Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or e ven f atal injur y . It is e xtremely impor tant that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefully and make sure y ou underst[...]

English – 3 CONTENTS Contents Note the f ollowing bef ore star ting: Please read the oper ator’ s manual carefully . KEY T O SYMBOLS Symbols ....................................................................... 2 CONTENTS Contents ...................................................................... 3 Note the f ollowing bef ore star ting: .[...]

4 – English INTR ODUCTION Dear Customer , Cong ratulations on y our choice to buy a Jonsered product! W e are convinced that you will appreciate with g reat satisfaction the quality and perf or mance of our product for a v er y long time to come. The purchase of one of our products gives you access to prof essional help with repairs and ser vice [...]

English – 5 WHA T IS WHA T? What is what? 1 7 19 24 25 26 23 22 21 20 15 6 5 8 16 17 18 13 14 4 3 2 2 12 11 10 9 1 Cutter 2 Grease nipple and plug f or filling lubr icant. 3 Be vel gear 4 Angle adjustment handle 5 Angle adjustment knob 6 Shaft 7 F ront handle 8 Throttle control 9 Stop s witch 10 Throttle lock 11 Star t throttle button 12 Harness[...]

6 – English GENERAL SAFETY PRECA UTIONS Impor tant P ersonal pr otective equipment HEARING PR O TECTION W ear hear ing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approv ed eye protection. If you use a visor then you m ust also wear approv ed protective goggles . Approv ed protective goggles m ust comply with s[...]

English – 7 GENERAL SAFETY PRECA UTIONS FIRST AID KIT Alw a ys hav e a first aid kit nearby . Mac hine ′ s safety equipment This section descr ibes the machine ′ s saf ety equipment, its pur pose, and ho w checks and maintenance should be carried out to ensure that it operates correctly . See the ”What is what?” section to locate where t[...]

8 – English GENERAL SAFETY PRECA UTIONS In countr ies that hav e a warm and dr y climate there is a significant risk of fire. W e therefore fit cer tain mufflers with a spark arrestor mesh. Check whether the m uffler on your machine is fitted with this kind of mesh. F or mufflers it is very impor tant that you f ollow the instructions on c[...]

English – 9 ASSEMBL Y Fitting the main bod y Connect the engine (A) to the tube (B) with f our screws (C). Connecting thr ottle cable and stop switc h wires 1 Inser t the throttle cable (A) through the carb urettor brack et (B), then screw the cab le adjuster sleev e (C) into the carburettor br acket fully . 2 P osition the slotted fitting (D) o[...]

10 – English ASSEMBL Y Adjusting the harness Y ou should alwa ys use the harness with the machine to give maximum control ov er the machine and reduce the r isk of f atigue in your arms and back. 1 Put on the harness. 2 Hook the machine onto the harness suppor t hook. 3 Adjust the length of the harness so that the suppor t hook is roughly le vel [...]

English – 11 FUEL HANDLING Fuel safety Ne ver star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allo w remaining fuel to e vaporate . 2 If you ha ve spilt fuel on y ourself or your clothes , change your clothes . W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is [...]

12 – English FUEL HANDLING Mixing • Alwa ys mix the petrol and oil in a clean container intended f or fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the[...]

English – 13 ST AR TING AND ST OPPING Chec k before starting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Nev er use blades that are dull, crac ked or damaged. • Check that the machine is in perf ect wor king order . Check that all nuts and scre ws are tight. • Make sure the gea[...]

14 – English W ORKING TECHNIQ UES General w orking instructions Safety instructions regar ding the surroundings • Ne ver allow children to use the machine . • Ensure that no-one comes closer than 15 m while you are working. • Ne ver allow an yone else to use the machine without first ensuring that they hav e understood the contents of the [...]

English – 15 W ORKING TECHNIQ UES • Alwa ys wear hea vy-duty gloves when repairing the cutting attachment. This is extremely sharp and can easily cause cuts. • Store the machine out of reach of children. • Use only original spare par ts for repairs . Basic w orking techniques • W or k with a s winging action from the bottom upwards when t[...]

16 – English W ORKING TECHNIQ UES 3 Grip the handle on the cutting unit and angle the cutting unit upwards . At an angle of 48 degrees there is a stop position. T o pass the stop position, pull out the lock b utton. 4 F old down the cutting unit against the shaft. 5 Tighten the knob . CA UTION! When the stop position has been passed the blades ar[...]

English – 17 MAINTENANCE Carb urettor Y our Jonsered product has been designed and manuf actured to specifications that reduce harmful exhaust fumes. The engine will be run in after it has used 8-10 tanks of fuel. T o ensure that the engine runs at peak performance and produces as little harmful exhaust fumes as possible after the running-in per[...]

18 – English MAINTENANCE Cooling system T o keep the working temperature as low as possib le the machine is equipped with a cooling system. The cooling system consists of: 1 Cooling fins on the cylinder . 2 Cylinder cov er (directs cold air ov er the cylinder). Clean the cooling system with a brush once a week, more often in demanding conditions[...]

English – 19 MAINTENANCE Gear There are three grease nipples on the gearbo x. Use a grease gun to top up with grease. This should be carr ied out after appro ximately ev er y 20 working hours. Use Jonsered special grease. Cleaning and lubrication Clean any resin and plant residue from the b lades using cleaning agent bef ore and after using the m[...]

20 – English MAINTENANCE Maintenance sc hedule The f ollowing is a list of the maintenance that must be perf or med on the machine. Most of the items are descr ibed in the Maintenance section. The user must only carr y out the maintenance and service work descr ibed in this Operator’ s Manual. More e xtensive work must be carried out by an auth[...]

English – 21 TECHNICAL D A T A T echnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conformity with EC directive 2000/14/EC . Repor ted sound power le vel f or the machine has been measured with the original cutting attachment that gives the highest le vel. The diff erence between guaranteed and measured [...]

22 – English TECHNICAL D A T A EC-dec laration of conformity (Applies to Eur ope only) Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge tr immers Jonsered HTE2123 from 2009’ s serial numbers and onwards (the year is clearly stated in plain te xt on the type plate with subsequent se[...]

[...]

´®z+Td@¶6o¨ 2009-11-17 ´®z+Td@¶6o¨ 1152683-26 Original instructions[...]