Juniper Networks M120 manual

M120 Internet Router PIC Guide Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net Part Number: 530-024399-01, Revision 1[...]

This guide provides an overview and description of the Physical Interface Cards (PICs) supported by the Juniper Networks M120 Internet router. The PICs are described alphabetically. Table 1 on page 3 lists the PICs supported by the M120 Internet router by PIC family. PICs provide the physical connection to various network media types. The PICs are [...]

Table 1: PICs Supported by the M120 Internet Router Page First JUNOS Support Ports PIC Family and Type ATM2 IQ 20 8.0R2 4 ATM2 DS3 IQ 22 8.0R2 4 ATM2 E3 IQ 24 8.0R2 2 ATM2 OC3/STM1 IQ 27 8.0R2 1 ATM2 OC12/STM4 IQ 27 8.0R2 2 ATM2 OC12/STM4 IQ 30 8.0R2 1 ATM2 OC48/STM16 IQ with SFP Channelized IQ 33 8.0R2 4 Channelized DS3 IQ 35 8.0R2 10 Channelized [...]

Table 1: PICs Supported by the M120 Internet Router (continued) Page First JUNOS Support Ports PIC Family and Type 78 8.0R2 1 10-Gigabit Ethernet DWDM 60 8.0R2 1 Gigabit Ethernet with SFP 60 8.0R2 2 Gigabit Ethernet with SFP 60 8.0R2 4 Gigabit Ethernet with SFP 60 8.0R2 10 Gigabit Ethernet with SFP Ethernet IQ 63 8.0R2 1 Gigabit Ethernet IQ with SF[...]

Table 1: PICs Supported by the M120 Internet Router (continued) Page First JUNOS Support Ports PIC Family and Type 91 8.0R2 1 SONET/SDH OC12c/STM4 94 8.4 1 SONET/SDH OC12/STM4 (Multi-Rate) with SFP 94 8.3 4 SONET/SDH OC12/STM4 (Multi-Rate) with SFP 99 8.0R2 4 SONET/SDH OC48c/STM16 with SFP 103 8.3 1 SONET/SDH OC48 /STM16 (Multi-Rate) with SFP 108 8[...]

FPCs and cFPCs Supported M120 routers support the FPCs listed in Table 2 on page 6. Table 2: FPCs Supported by the M120 Router First JUNOS Release Maximum Throughput per FPC Maximum Number of PICs Supported per FPC FPC Model Number FPC Name FPC Type 8.0R2 4 Gbps 4 M120-FPC1 FPC1 1 8.0R2 10 Gbps 4 M120-FPC2 FPC2 2 8.0R2 10 Gbps 1 M120-FPC3 FPC3 3 A [...]

Table 4: Optical Interface Support for 10-Gigabit Ethernet cFPC (continued) 10-GBASE-Z 10-GBASE-E 10-GBASE-L 10-GBASE-S Parameter 9/125 SMF cable: 49.6 miles/80 km 9/125 SMF cable: 24.8 miles/40 km: Distances greater than 30 km are considered to be engineered links. 9/125 SMF cable: 6.2 miles/10 km 50/125 MMF cable, 2000 Mhz-Km: 984 feet/300 m 50/1[...]

Table 5: Optical Interface Support for SONET/SDH OC192/STM64 cFPC (continued) Long Reach (LR) 2 Intermediate reach (IR) 2 Short reach (SR) 1 Parameter SMF cable: 49.71 miles/80 km SMF cable: 24.8 miles/40 km; distances greater than 30 km are considered to be engineered links. SMF cable: 6.21 miles/10 km Maximum distance 1530 through 1565 nm 1530 th[...]

PIC/FPC Compatibility Table 6 on page 9 provides a PIC/FPC compatibility matrix for the supported PICs for the M120 router. Table 6: M120 PIC/FPC Compatibility FPC3 FPC2 FPC1 PIC Model Number Number of Ports PIC Type ATM2 IQ PICs – – 8.0R2 PB-4DS3-ATM2 4 ATM2 DS3 IQ – – 8.0R2 PB-4E3-ATM2 4 ATM2 E3 IQ – – 8.0R2 PB-2OC3-ATM2-MM PB-2OC3-AT[...]

Table 6: M120 PIC/FPC Compatibility (continued) FPC3 FPC2 FPC1 PIC Model Number Number of Ports PIC Type EIA-530 PIC – – 8.0R2 PB-2EIA530 2 EIA-530 Ethernet PICs – – 8.0R2 PB-4FE-TX 4 Fast Ethernet – – 8.0R2 PB-8FE-FX 8 Fast Ethernet – – 8.0R2 PB-12FE-TX 12 Fast Ethernet – 8.0R2 – PB-48FE-TX 48 Fast Ethernet – – 8.0R2 PB-1GE[...]

Table 6: M120 PIC/FPC Compatibility (continued) FPC3 FPC2 FPC1 PIC Model Number Number of Ports PIC Type – – 8.2R2 PB-MS-100-1 0 MultiServices 100 NOTE: This PIC requires the 710-017980 version or later of the FPC1. – 8.2 – PB-MS-400-2 0 MultiServices 400 8.3 – – PC-MS-500-3 0 MultiServices 500 – – 8.0R2 PB-TUNNEL-1 0 Tunnel Service[...]

Adaptive Services II PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Supports tunnel services. This feature is included with the PIC and does not require an individual license. ■ Individual licenses must be purchased for additional services. ■ Power requirement: 0.4 A @ 48 V (1[...]

Table 7: Adaptive Services PICs Software Features Supported by the M120 Router Adaptive Services II Layer 2 Services PIC Adaptive Services II PIC Software Feature – – GRE Key – – GRE dont-fragment – 8.0R2 Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks – 8.0R2 Network Address[...]

Table 7: Adaptive Services PICs Software Features Supported by the M120 Router (continued) – 8.0R2 Encapsulations: ■ Multilink Frame Relay (MLFR) ■ Multilink Point-to-Point Protocol (MLPP) 14 ■ Adaptive Services II PIC M120 Internet Router PIC Guide[...]

Adaptive Services II FIPS PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ JUNOS-FIPS requires an Adaptive Services II FIPS PIC for external IPSec connections. See the Secure Configuration Guide for Common Criteria and JUNOS-FIPS for more information. ■ Supports tunnel services. T[...]

For a list of the software features available for services PICs, see the JUNOS Services Interfaces Configuration Guide . Depending on your JUNOS release and individual licenses, software features for this PIC can include: ■ Stateful firewall with packet inspection: ■ Detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks ■ NAT fo[...]

Adaptive Services II Layer 2 Services PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other services require an individual license. ■ Power requirement: 0.4 A @ 48 V (19 W) Description ■ Support f[...]

Table 8: Adaptive Services PICs Software Features Adaptive Services II Layer 2 Services PIC Adaptive Services II PIC Software Feature – – GRE Key – – GRE dont-fragment – 8.0R2 Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks – 8.0R2 Network Address Translation (NAT) for IP add[...]

Table 8: Adaptive Services PICs Software Features (continued) – 8.0R2 Encapsulations: ■ Multilink Frame Relay (MLFR) ■ Multilink Point-to-Point Protocol (MLPP) Adaptive Services II Layer 2 Services PIC ■ 19 Adaptive Services II Layer 2 Services PIC[...]

ATM2 DS3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.41 A @ 48 V (20.0 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ ATM standards compliant Description ■ 16-MB SDRAM memory for ATM segm[...]

■ Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping ■ Unspecified bit rate (UBR) traffic shaping ■ Fine-grained variable bit rate (VBR) traffic shaping ■ Circuit cross-connect (CCC) ■ ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn the IP address of the router on the far end of [...]

ATM2 E3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four E3 ports ■ Power requirement: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ ATM standards compliant Description ■ 16-MB SDRAM memory for ATM segmentat[...]

■ Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping ■ Unspecified bit rate (UBR) traffic shaping ■ Fine-grained variable bit rate (VBR) traffic shaping ■ Circuit cross-connect (CCC) ■ ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn the IP address of the router on the far end of [...]

ATM2 OC3/STM1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Two OC3 ports ■ Power requirement: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 ■ ATM and SONET/SDH[...]

■ Circuit cross-connect (CCC) for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indicator (RDI) cells, and loop cells ■ Point-to-point and point-to-mu[...]

Table 9: Optical Interface Support for ATM2 OC3 IQ PICs (continued) Multimode Intermediate Reach (IR) Parameter Multivendor agreement Telcordia GR-253 Standard 1.2 miles/2 km 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1260 through 1360 nm Transmitter wavelength – 20 through – 14 dBm – 15 through – 8 dBm Average launch power – 1[...]

ATM2 OC12/STM4 IQ PICs Left: 1-port ATM2 OC12/STM4 IQ PIC; Right: 2-port ATM2 OC12/STM4 IQ PIC ■ 1-port: JUNOS 8.0R2 and later (Type 1) ■ 2-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ One or two OC12 ports ■ Power requirement: ■ 1-port: 0.41 A @ 48 V (20 W) ■ 2-port:[...]

■ Circuit cross-connect for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indication (RDI), and loop cells ■ Point-to-point and point-to-multipoint mo[...]

Table 10: Optical Interface Support for ATM2 OC12/STM4 IQ PICs (continued) Multimode Transceiver Intermediate Reach (IR) Transceiver Parameter Multivendor agreement Telcordia GR-253 Standard 546.8 yards/500 m 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Transmitter wavelength – 20 through – 14 dBm – 15 through ?[...]

ATM2 OC48/STM16 IQ PIC with SFP ■ JUNOS 8.0R2 and later (Type 2) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC48 port ■ Power requirement: 0.41 A @ 48 V ( 20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 ■ Comp[...]

■ Multiprotocol Label Switching (MPLS) circuit cross-connect for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indicator (RDI), and loop cells ■ Point[...]

Table 11: Optical Interface Support for ATM2 IQ OC48 PICs (continued) Single-Mode Intermediate Reach PIC Type Telcordia GR-253 Standard 9.3 miles/15 km Maximum distance 1274 through 1356 nm Transmitter wavelength – 15 through – 8 dBm Average launch power – 8 dBm Receiver saturation – 28 dBm Receiver sensitivity 32 ■ ATM2 OC48/STM16 IQ PIC[...]

Channelized DS3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.32 A @ 48 V (15.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: DS3, DS0 Description ■ Data service unit (DSU) [...]

■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB ■ Dynamic, arbitrary channel configuration ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect [...]

Channelized E1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Ten E1 ports ■ Power requirement: 0.15 A @ 48 V (7.2 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: E1, DS0 Description ■ Data service unit (DSU) func[...]

■ 120-ohm RJ-48C Cables and connectors One bicolor per E1 port: ■ Off — Port not enabled ■ Green — Physical E1 link is up; individual subchannels can be down ■ Red — Physical E1 link is down LEDs ■ Alarm indication signal (AIS) ■ Loss of frame (LOF) ■ Out of frame (OOF) ■ Failed signal rate (FSR) Alarms, errors, and events ■[...]

Channelized OC3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC3 port ■ Power requirement: 0.39 A @ 48 V (8.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: DS3, DS1, DS0 ■ Optical interface support — see[...]

■ Quality of Service (QoS) per channel: weighted round-Robin (WRR), random early drop (RED), weighted random early drop (WRED) ■ Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB ■ Dynamic, arbitrary channel configuration ■ Full Bit Error Rate Testing (BERT) ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ F[...]

Table 12: Optical Interface Support for Channelized OC3 IQ PICs (continued) Intermediate Reach (IR) PIC Type – 15 through – 8 dBm Average launch power – 8 dBm Receiver saturation – 28 dBm Receiver sensitivity Channelized OC3 IQ PIC ■ 39 Channelized OC3 IQ PIC[...]

Channelized OC12 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC12 port ■ Power requirement: 0.23 A @ 48 V (10.8 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: OC3, DS3, DS1, DS0 Description ■ Subrate and sc[...]

■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB ■ Dynamic, arbitrary channel configuration ■ Full bit error rate test (BERT) ■ Encapsulations: ■ High-Level Data Link Control (HDLC[...]

Table 13: Optical Interface Support for Channelized OC12 IQ PICs (continued) Intermediate Reach (IR) Parameter Telcordia GR-253 Standard 9.3 miles/15 km Maximum distance 1274 through 1356 nm Transmitter wavelength – 15 through – 8 dBm Average launch power – 8 dBm Receiver saturation – 28 dBm Receiver sensitivity 42 ■ Channelized OC12 IQ P[...]

Channelized STM1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One STM1 port ■ Power requirement: 0.39 A @ 48 V (18.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: STM1c, fractional E1, framed and unframed DS0 Des[...]

■ Alarm indication signal (AIS-L, AIS-P) ■ Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF) ■ Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) ■ Errored seconds (ES-S, ES-L, ES-P), far-end bit errors REI-L, REI-P (CV-LFE, CV-PFE), far-end errored seconds (ES-LFE, ES-PFE), far-end severely errored seco[...]

Channelized T1 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Ten T1 ports ■ Power requirement: 0.15 A @ 48 V (7.2 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface. ■ Channelization: T1, FT1, N xDS0 Description Channelized T1 IQ PIC ?[...]

■ Data service unit (DSU) and channel service unit (CSU) functionality ■ Ports configurable as clear channel T1 interfaces with 1.544-Mbps connectivity ■ Framing: Superframe (SF or D4) and Extended Superframe (ESF) ■ Supports B8ZS (bipolar 8-zero substitution) and AMI (alternate mark inversion) line coding ■ Local, remote, and payload loo[...]

■ Alarm indication signal (AIS) ■ Remote defect indication (RDI) ■ Loss of frame (LOF) ■ Loss of signal (LOS) ■ Bipolar violation (BPV) ■ Excessive zero (EXZ) ■ Line code violation (LCV) ■ Error seconds (ES) ■ Severely errored seconds (SES) ■ Severely errored frames (SEF) ■ Bit error event (BEE) Alarms, errors, and events ■ [...]

DS3 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four DS3 ports ■ Power requirement: 0.47 A @ 48 V (22.5 W) ■ Integrated DSU interoperability with leading DSU vendors Description ■ High-performance throughput on each port at speeds up to 44.736 Mbps, full duplex ■ C-bit [...]

■ DS3 functionality: ■ C-bit framing ■ B3ZS line encoding ■ DS3 diagnostics and loopback control ■ DS3 alarm and event counting and detection ■ Per-packet counts and byte counts ■ Local and remote loopback testing, as well as BERT testing per DS3 ■ DS3 far-end alarm and control (FEAC) channel support ■ Encapsulations: ■ High-Lev[...]

E1 PICs Left: E1 RJ-48 PIC; Right: E1 Coaxial PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ Four E1 or coaxial ports ■ Power requirement: 0.08 A @ 48 V (3.74 W) ■ Two versions: ■ 4-port, 120-ohm, RJ-48 ■ 4-port, 75-ohm, coaxial ■ Onboard DSU functionality for E1 conn[...]

■ Integrated support for G.703 unframed mode and G.704 framed mode with CRC; this feature is user-configurable NOTE: The G.704 implementation supports speeds slower than 2.048 Mbps; multiple channels within a single E1 interface are not supported. ■ Configurable clock source: Internal or loop ■ Encapsulations: ■ High-Level Data Link Control[...]

E3 IQ PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four E3 ports ■ Power requirement: 0.38 A @ 48 V (18 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Description ■ Clear-channel (34.368-Mbps) and subrate E3 ■ Unframed or ITU G.751 [...]

■ Quality of service (QoS) per port: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB ■ Input policing and output shaping ■ Provider-side rate limiting ■ Full data link connection identifier (DLCI) range with sparse channel numberi[...]

EIA-530 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Two EIA-530, X.21 or V.35 serial ports ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ Configured as data terminal equipment (DTE) ports ■ Resynchronization signal ■ Receives clock rates up to 16 Mbps ■ Loca[...]

■ Supports four queues per port ■ Random early detection (RED) ■ Transmitter Signal Element Timing is looped from the timing received on the Transmitted Signal Element DCE. EIA-530 ports support the ability to invert the Transmit Data Element. The EIA-530 ports support the following rates: ■ 2.048 Mbps ■ 2.341 Mbps ■ 2.731 Mbps ■ 3.27[...]

Fast Ethernet PICs Left: 4-Port Fast Ethernet PIC; Right: 8-Port Fast Ethernet PIC Left: 12-Port Fast Ethernet PIC; Right: 48-Port Fast Ethernet PIC 56 ■ Fast Ethernet PICs M120 Internet Router PIC Guide[...]

VHDCI to RJ-21 Cable ■ 4-port: JUNOS 8.0R2 and later (Type 1) ■ 8-port: JUNOS 8.0R2 and later (Type 1) ■ 12-port: JUNOS 8.0R2 and later (Type 1) ■ 48-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ 4 100Base-TX ports ■ 8 100Base-FX ports ■ 12 100Base-TX ports ■ 48 10[...]

4-port PIC: ■ Connector: Two-pair, Category 5 unshielded twisted-pair connectivity through an RJ-45 connector ■ Pinout: MDI noncrossover 8-port PIC: ■ Connector: MT-RJ female ■ FX optical interface — see Table 14 on page 59 12-port PIC: ■ Connector: One very High Density Connector Interface (VHDCI) to RJ-21 cable that connects to an RJ-[...]

48-port PIC — does not have port LEDs. To check port status on a 48-port PIC, use the show interfaces fe- fpc / pic / port command. For more information about this command, see the JUNOS Network Interfaces Configuration Guide . Table 14: Optical Interface Support for Fast Ethernet PICs FX Interface for 8-Port Parameter Multimode Optical interface[...]

Gigabit Ethernet PICs with SFP Left: 1-Port Gigabit Ethernet PIC; Right: 2-Port Gigabit Ethernet PIC Left: 4-Port Gigabit Ethernet PIC; Right: 10-Port Gigabit Ethernet PIC 60 ■ Gigabit Ethernet PICs with SFP M120 Internet Router PIC Guide[...]

Software release ■ 1-port: JUNOS 8.0R2 and later (Type 1) ■ 2-port: JUNOS 8.0R2 and later (Type 2) ■ 4-port: JUNOS 8.0R2 and later (Type 2) ■ 10-port: JUNOS 8.0R2 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. ■ One, two, four, or ten Gigabit Ethernet ports ■ Power requirement: ■ 1-port: 0.15 A @ 48 V (7[...]

Status LED, one bicolor: ■ Off — PIC is not enabled ■ Green — PIC is operating normally ■ Red — PIC has an error or failure Port LEDs, one pair per port: ■ Link — If green, the port is online; if there is no light, the port is down ■ Activity — If flashing green, the port is receiving data; if there is no light, the port might b[...]

Gigabit Ethernet IQ PICs with SFP Left: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC ■ 1-port: JUNOS 8.0R2 and later (Type 1) ■ 2-port: JUNOS 8.0R2 and later (Type 2) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ One or two Gigabit Ethernet ports ■ Power requirement: 0.46 A @ 48 V (22[...]

■ You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Fiber-optic SFP transceivers: ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — see Table 16 on page 64 ■ 1000Base-T SFP transceivers: ■ Connecto[...]

Table 16: Optical Interface Support for Gigabit Ethernet IQ PICs with SFP (continued) 1000Base-LH 1000Base-LX 1000Base-SX Parameter – 20 through – 3 dBm – 19 through – 3 dBm – 17 through 0 dBm Average receive power – 3 dBm – 3 dBm 0 dBm Receiver saturation – 20 dBm – 19 dBm – 17dBm Receiver sensitivity Gigabit Ethernet IQ PICs w[...]

Gigabit Ethernet IQ2 PICs with SFP Left: 4-port Gigabit Ethernet IQ2 PIC (Type 1); Right: 8-port Gigabit Ethernet IQ2 PIC (Type 2) 66 ■ Gigabit Ethernet IQ2 PICs with SFP M120 Internet Router PIC Guide[...]

g002378 Center: 8-port Gigabit Ethernet IQ2 PIC (Type 3) ■ 4-port: JUNOS 8.0R2 and later (Type 1) ■ 8-port: JUNOS 8.0R2 and later (Type 2) ■ 8-port: JUNOS 8.5 and later (Type 3) NOTE: These PICs are not supported in JUNOS Release 8.1R1. Software release ■ Four or eight Gigabit Ethernet ports ■ Power requirement: ■ 4-port: 0.65 A @ 48 V [...]

■ Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs ■ Optical diagnostics and related alarms ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Virtual Router Redundancy Protocol (VRRP) support ■ Hierarchical shaping ■ Fine-gr[...]

Table 17: Optical Interface Support for Gigabit Ethernet IQ2 PICs with SFP 1000Base-LH 1000Base-LX 1000Base-SX Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type Multivendor agreement IEEE 802.3 — 1998 IEEE 802.3 — 1998 Standard 9/125 SMF cable: 43.5 miles/70 km 9/125 SMF cable: 6.2 miles/10 km 62.5/125 o[...]

10-Gigabit Ethernet IQ2 PIC with XFP ■ JUNOS 8.2 and later (Type 3) Software release ■ One 10-Gigabit Ethernet port ■ Power requirements: 1.2 A @48 V (56 W) Description ■ High-performance throughput ■ WAN-PHY mode at 9.953 Gbps ■ LAN-PHY mode at 10.3125 Gbps ■ Full-duplex mode ■ Large maximum transmission units (MTUs) of up to 9192 [...]

■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Configurable WAN-PHY mode options: ■ loopback ■ mpls ■ path-trace ■ trigger ■ Virtual Router Redundancy Protocol (VRRP) support ■ Hierarchical shaping ■ Fine-grained queueing and shaping per lo[...]

Table 18: Optical Interface for 10-Gigabit Ethernet IQ2 PICs 10-GBase-Z 10-GBase-E 10-GBase-L 10-GBase-S Parameter XFP-10G-Z-OC192-LR2 XFP-10G-E-OC192-IR2 XFP-10G-L-OC192-SR1 XFP-10G-S Transceiver model number Single-mode Single-mode Single-mode Multimode Optical interface XFP XFP XFP XFP Transceiver type Multivendor agreement IEEE 802.3ae — 2002[...]

10-Gigabit Ethernet PIC with XENPAK ■ 10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3) ■ XENPAK-OTN transceivers: JUNOS 9.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 W) ■ Supports large Ethernet frame sizes[...]

■ Duplex SC/PC connector (RX and TX) ■ Optical interface support — See Table 19 on page 74 and Table 20 on page 75 Cables and connectors Status LED, one bicolor: ■ Off — PIC not enabled ■ Green — PIC is operating normally ■ Red — PIC has an error or failure Port LEDs, one pair: ■ Link — If green, the port is online; if there i[...]

Table 19: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK (continued) Extra-Long Wavelength Serial (10GBase-ZR), LAN Rate Extra-Long Wavelength Serial (10GBase-ER), LAN Rate Long Wavelength Serial (10GBase-LR), LAN Rate Short Wavelength Serial (10GBase-SR), LAN Rate Parameter – 24.0 through – 7.0 dBm – 15.8 through – 1.0 [...]

Table 20: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK-OTNs (continued) ■ Transmitter type: Electro-absorption Modulated Laser (EML) ■ Modulation format: Non-retum-to-zero (NRZ) ■ Channel-plan wavelength range: 1551.72 through 1542.94 nm ■ Channel-plan frequency range: 193.2 through 194.3 THz ■ Channel spacing: 100 G[...]

Table 21: XENPAK-OTN Optical Signal-to-Noise Ratio (OSNR) Performance (continued) CD Tolerance (ps/nm) Input-Power Range (dBm) Post-FEC BER Pre-FEC BER FEC Type OSNR (dB/0.5 nm) OSNR (dB/0.1 nm) – 400 to +800 – 8 to – 20 10 – 15 10 – 5 GFEC 10 17 – 600 to +1200 – 8 to – 20 10 – 15 10 – 5 GFEC 11 18 – 700 to +1500 – 8 to – [...]

10-Gigabit Ethernet DWDM PIC ■ JUNOS 8.0R2 and later (Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 W) ■ Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network Description ■ C-band ITU-Grid wit[...]

■ Enhanced optical monitoring capabilities ■ CLI configurable wavelength support ■ Virtual Router Redundancy Protocol (VRRP) support ■ 802.1q virtual LANs (VLANs) support ■ 802.3ae link aggregation support ■ RMON EtherStats Software features ■ Duplex SC/PC connector (RX and TX) Cables and connectors Status LED, one bicolor: ■ Off ?[...]

MultiServices PICs Left: MultiServices 100 PIC; Right: MultiServices 400 PIC Center: MultiServices 500 PIC Software release 80 ■ MultiServices PICs M120 Internet Router PIC Guide[...]

■ MultiServices 100: JUNOS 8.2R2 and later (Type 1) NOTE: This PIC requires the 710-017980 version of the FPC1. ■ MultiServices 400: JUNOS 8.2 and later (Type 2) ■ MultiServices 500: JUNOS 8.3 and later (Type 3) ■ Supports tunnel services. This feature is included with the PIC and does not require an individual license. ■ Individual licen[...]

Table 24: MultiServices PICs Software Features Supported on the M120 Router (continued) 8.3 8.2 8.2R2 Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks 8.3 8.2 8.2R2 Network Address Translation (NAT) for IP addresses 8.3 8.2 8.2R2 Port Address Translation (PAT) for port numbers 8.5 8.2 8.2[...]

SONET/SDH OC3c/STM1 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-mode intermediate reach PIC are both supported. NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four OC3 ports ■ Power requirement: 0.49 A @ 48 V (23.7 W) Description ■ Multi[...]

■ Duplex SC/PC connector (Rx and Tx) ■ Optical interface support — See Table 25 on page 85 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device. For information about taking a PIC offline, see the request chassis pic of[...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 25: Optical Interface Support for SONET/SDH OC3c/STM1 PICs (continued) Multimode Intermediate Reach Parameter Multivendor agreement Telcordia GR-253 Standard MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1260 through 1360 nm Transmitter wavelength – 20 through – 14 dBm – 15 through – 8 dBm [...]

SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP POR T 3 Left: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1); Right: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 2) ■ 4-port: JUNOS 8.4 and later (Type 1) ■ 4-port: JUNOS 8.3 and later (Type 2) Software release ■ Rate-selectable using one of the following rates: ■ 1-port OC12 ■ 1-port OC12c ■ 4-[...]

■ Optical diagnostics and related alarms ■ Per-port SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect (CC[...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 26: Optical Interface Support for SONET/SDH OC3/STM1 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km Max[...]

SONET/SDH OC12c/STM4 PIC ■ JUNOS 8.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ One OC12 port ■ Power requirement: 0.23 A @ 48 V (10.8 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware features ■ [...]

One tricolor per port: ■ Off — Not enabled ■ Green — Online with no alarms or failures ■ Amber — Online with alarms for remote failures ■ Red — Active with a local alarm; router has detected a failure LEDs ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate s[...]

Table 28: Optical Interface Support for SONET/SDH OC12c/STM4 PICs Multimode Intermediate Reach Parameter Multimode Single-mode Optical interface Fixed Fixed Transceiver type Multivendor agreement Telcordia GR-253 Standard MMF cable: 546.8 yards/500 m SMF cable: 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Transmitter w[...]

SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP Left: 1-port SONET/SDH OC12/STM4 (Multi-Rate) PIC; Right: 4-port SONET/SDH OC12/STM4 (Multi-Rate) PIC ■ 1-port: JUNOS 8.4 and later (Type 1) ■ 4-port: JUNOS 8.3 and later (Type 2) Software release ■ 1-port: Rate-selectable using one of the following rates: ■ 1-port OC3 ■ 1-port OC12 ■ 1-por[...]

■ Optical diagnostics and related alarms ■ Per-port SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect (CC[...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 29: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km Ma[...]

Table 31: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Long Reach (LR-2) Intermediate Reach (IR-1) Short Reach (SR-1) Parameter SFP SFP SFP Transceiver type SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 Telcordi[...]

SONET/SDH OC48c/STM16 PIC with SFP ■ JUNOS 8.0R2 and later NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four OC48 ports ■ Power requirement: 0.86 A @ 48 V (41.4 W) Description ■ Multiplexing and demultiplexing on the 1-port PIC ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 [...]

You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — See Table 32 on page 101 NOTE: To extend the life of the laser, when a PIC is not being actively used with [...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 32: Optical Interface Support for SONET/SDH OC48c/STM16 PICs with SFP (continued) Long Reach (LR) Intermediate Reach (IR) Short Reach (SR) Parameter SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 — L-16.3 Telcordia GR-253 Telcordia GR-253 Standard 1500 through 1580 nm 126[...]

SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP ■ JUNOS 8.3 and later (Type 2) Software release ■ Rate-selectable using one of the following rates: ■ 1-port OC3c ■ 1-port OC12 ■ 1-port OC12c ■ 1-port OC48 ■ 1-port OC48c ■ Power requirement: 0.20 A @ 48 V (9.5 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on inp[...]

You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — See Table 33 on page 105, Table 34 on page 106, and Table 35 on page 106 NOTE: To extend the life of the la[...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 33: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km M[...]

Table 35: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Long Reach (LR-2) Intermediate Reach (IR-1) Short Reach (SR-1) Parameter SFP SFP SFP Transceiver type SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 Telcord[...]

SONET/SDH OC192c/STM64 PIC with XFP ■ JUNOS 8.3 and later (Type 3) Software release ■ One OC192 port ■ Power requirement: 0.52A @ 48 V (25 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware features ■ SONET/SDH framing ■ Link aggregation ?[...]

■ Duplex LC connector (Rx and Tx) ■ Optical interface support — See Table 36 on page 110 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device. For information about taking a PIC offline, see the request chassis pic offl[...]

■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los[...]

Table 36: Optical Interface Support for SONET/SDH OC192 PICs (continued) Long Reach (LR-2) Intermediate Reach (IR-2) Short reach (SR-1) Parameter XFP XFP XFP Transceiver type Telcordia GR-253 OC192 LR2 Telcordia GR-253 OC192 IR2 Telcordia GR-253 OC192 SR1 Standard SMF cable: 49.71 miles/80 km SMF cable: 24.8 miles/40 km; distances greater than 30 k[...]

T1 PIC ■ JUNOS 8.0R2 and later (Type 1) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Four T1 ports ■ Power requirement: 0.08 A @ 48 V (3.7 W) ■ Supports clear channel T1 per port (1.544 Mbps per channel) ■ Supports attenuation up to – 12 dBm Description ■ Per-port loop timing ■ Onboard DSU functionality[...]

■ Alarm indication signal (AIS) ■ Bipolar violations ■ Excessive zeros ■ Far-end block errors (FEBE, E-bit errors) ■ Loss of frame (LOF), Loss of signal (LOS) ■ Yellow alarm bit (X-bit) disagreements Alarms, errors, and events T1 PIC ■ 113 T1 PIC[...]

Tunnel Services PIC ■ JUNOS 8.0R2 and later (Type 1, Type 2, and Type 3) NOTE: This PIC is not supported in JUNOS Release 8.1R1. Software release ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ Loopback function that encapsulates and de-encapsulates packets ■ OC12/STM4 tunneling bandwidth on FPC1; OC48/STM16 tunneling bandwidth on [...]

Appendix A High Availability Features High availability features include Routing Engine redundancy, graceful Routing Engine switchover (GRES), nonstop bridging, nonstop active routing, graceful restart for routing protocols, Virtual Router Redundancy Protocol (VRRP), and unified in-service software upgrade (ISSU). Some high availability features ar[...]

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or reg[...]