Jura Capresso Impressa 68193 manual

Opera ting Ins tr uctions and W arranty Cus tomer Ser vice 1-800-220-5701 Impressa S9 One T ouch Fully A utomatic Coffee & Espresso Center with Clear yl W ater Care System Impressa S9 One T ouch 68193 CAPRESSO[...]

2. IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids. 4.[...]

Notice : This machine has a 3-prong gr ounded plug. T o reduce the risk of electrical shock, this plug will fit in an outlet only one way . If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way . CAUTION This appliance is for household use. Any servicing other than cleaning and user maintenance s[...]

1. Height-Adjustable Dual Coffee Spout 2. Operating Display (Fig.2) 3. Removable W ater T ank 4. Low W ater Flotation Device (inside) 5. Clearyl W ater Care Cartridge (Not Installed) 6. Lid for W ater T ank 7. Holder for Clearyl W ater Cartridge 8. Bean Aroma Pr otection Lid 9. Cover for Bean Container 10. Lid for Ground Cof fee Funnel 11. Opening [...]

SELECT PRODUCT A B C D FIG. 2 FIG. 3 FIG. 3A Display Dialog System ON/OFF Button 1-CUP Espresso Button 1-CUP Coffee Button RINSE Button 2-CUP Espresso Button 2-CUP Coffee Button 3.1 Hot W ater Portion symbol 3.2 Milk Portion symbol 3.3 Selector Dial with push button 3.4 Hot W ater symbol 3.5 Milk symbol 3.6 Cappuccino button 3.7 Latte Macchiato but[...]

FIG. 5 FIG. 6 FIG. 7 FIG. 8 FIG. 10 FIG. 9 FIG. 13 6. FIG. 12 F IG. 11 Extension rod[...]

FIG. 14a FIG. 16 FIG. 17 FIG. 14b FIG. 15 Frothing range Steaming range Steam only no siphoning Siphoning with flexible hose DIAL FIG. 17a 7. chrome face plate venting tip Black fitting Milk hose T ransparent fitting Stainless steel rod Coffee spout Milk / Steam spout[...]

FIG. 20 FIG. 22 FIG. 24 FIG. 25 FIG. 23 FIG. 21 FIG. 19 FIG. 18 8.[...]

Important Safeguards / Jura Capr esso ..................... 2 Drawings ....................................................................4-8 Important / Battery Back-up ................................... 11 1. Product W arranty Registration ................................... 11 2. Operating Instructions / Quick Reference Guide ...... 11 3. W el[...]

12a. W ater Hardness Monitor ......................................... 21 12b. Changing the W ater Hardness Monitor .................. 22 13. Clearyl W ater Filter Cartridge .................................. 22 13a. Installing and Activating the Clearyl W ater Cartridge ..................................................... 23 13b. Automatic Cleary[...]

IMPORT ANT / BA TTER Y BACK-UP The Impressa S9 One T ouch has an internal battery back-up for the clock functions. After plugging the S9 OT in for the first time, turn the Main Power Switch in the back of the machine on (Fig. 1b; the red indicator light in the ON/OFF button (Fig. 2,B) will illumi- nate). Leave the main power switch on for the first[...]

3a. BEAN-TO-CUP / “CREMA COFFEE" / HIGH PRESSURE BREWING According to the majority of cof fee experts, grinding the beans just before br ewing, tamping and brewing under high pr essure is the ideal extracting process for maximum flavor and ar oma. Y our S9 OT automatic coffee center will always pr oduce espresso and coffee with a thick, foam[...]

• Never fill anything but fresh, cold clean water into the water container , except when decalcifying (chapter 17.1). • Never use mineral or carbonated water . Y ou can use tap water , bottled water , spring water , distilled water and reverse osmosis water . • Never repair or open the machine yourself. All repairs should be performed only by[...]

Factory Settings for Beverage Buttons: • All coffee buttons are set to temperatur e HIGH . • The hot water function is set to XHIGH . • 1-CUP Espresso button (Fig. 2,C) 2 oz./ STRONG . • 2-CUP Espresso button (Fig. 2,F) 2 oz. per cup / XSTRONG . • 1-CUP Coffee button (Fig. 2,D) 5 oz./ STRONG . • 2-CUP Coffee button (Fig. 2,G) 5 oz. per [...]

Oily Beans: Beans with an oily surface tend to stick together . This may prevent a continuous flow of beans fr om the bean container into the burrs. As a result the grinder does not grind enough coffee and you might get weak or no cof fee at all. Stir the beans in the bean container just before grinding. Alternatively , you can also pour the beans [...]

RINSING . The water will be caught in the drawer underneath. The rinse cycle stops by itself and the display reads: COFFEE READY . Y ou are now ready to make cof fee. *Note: S9 OT can be programmed to automatically start the rinsing cycle after HEA TING UP is displayed (chapter 14.7). 8a. TURNING THE MACHINE OFF / RINSING Before turning off the S9 [...]

Please note: Y ou can always stop the brewing process by pressing any of the cof fee buttons. 9c. OVERRIDING STRENGTH AND CUP SIZE DURING BREWING During brewing you can override the str ength of the two one- cup buttons (Fig. 2, C, D) and the cup size of all four coffee buttons. When using the two-cup buttons the S9 OT automati- cally selects the m[...]

Please note: If the Ground Cof fee button (Fig. 3A,O) is pressed by mistake just pr ess one of the coffee buttons, NOT ENOUGH PRE-GROUND . The machine will automatically stop and return to COFFEE READY . Please note: After use of sugar coated or flavored cof fee through the pr e-ground cof fee funnel you may experience some flavor transfer when swi[...]

(6 to 4 o’clock). Milk will be steamed, not frothed. T ur ning the dial towards the 4 o’clock position incr eases milk temperature. Steam Only Position: When the dial points to the steam symbol (3 o'clock), the siphoning is blocked. Only steam will pass through the fr otherXpress. 10c. PREP ARING ONE-TOUCH CAPPUCCINO, CAFÉ MOCHA AND LA TT[...]

"MILK PORTION" siphons milk for a pr ogrammed time and stops automatically). • Push the button inside the Selector Dial. The display shows MILK or MILK PORTION . During this time hot steamed / frothed milk is cr eated and delivered into your cup. COFFEE READY . 10f. OVERRIDING THE CAPPUCCINO SETTINGS As with the coffee buttons you can o[...]

The temperature for this function can be set to LOW , NORMAL and XHIGH (chapter 14.1; example 3) Y ou can override the WA TER POR TION during the hot water release with the Rotary Dial. Y ou can re-program the hot water portion (chapter 14.1). 11. VISUAL PROGRAMMING OF BEVERAGE PORTIONS Chapters 14 and 14.1 explain how to re-pr ogram all parameters[...]

One or more sections of the indicator strip will turn reddish. • Change the water hardness setting according to the table below . Please note: If you use Spring or Bottled W ater with low calcium levels you can set the hardness to 3ºdH, "extr emely soft water". 12b. CHANGING THE WA TER HARDNESS MONITOR COFFEE READY Example: change the [...]

13a. INST ALLING & ACTIV A TING THE CLEAR YL WA TER CARTRIDGE Installing: Important: Never install the cartridge before or during "Preparing Machine For The First Time" (chapter 6). • Remove cartridge from its bag and rinse cartridge under water . • Add the extension rod to the cartridge (Fig. 11). • Remove the water tank, make [...]

13c. MANUAL CLEAR YL REPLACEMENT If the filter is more than 2 months old and the display does not indicate to replace filter , replace as follows. COFFEE READY . • Push the Rotary Dial until the display shows MAINTENANCE . • Push Rotary Dial again, display shows CLEAN CAPPUCCINO . • T ur n the Rotary Dial until the display shows CHANGE FIL TE[...]

T emperature : for all coffee drinks the temperatur e can be set to NORMAL or HIGH MILK PORTION : steaming can be set fr om 3 to 120 seconds. P AUSE : the pause time between milk production and coffee brewing for the one-touch Cappuccino and Latte Macchiato buttons can be set from 0 to 60 seconds. HOT WA TER PORTION: can be set fr om 0.5 to 15 oz. [...]

9. T urn the Rotary Dial until the display shows MILK 14 SEC 10. Push the dial, MILK 14 SEC , and turn the dial until the display shows MILK 20 SEC . 11. Push the Rotary Dial to confirm: CONFIRMED ✓ then MILK 20 SEC . 12. Push the Rotary Dial until the display shows P AUSE 15 SEC . 13. Push the Rotary Dial, P AUSE 15 SEC , and turn the Rotary Dia[...]

If the machine is primarily used for coffee this setting saves ener gy . The heating element for steam (milk frothing) will shut off after approx. 10 minutes after last use. At this time the white indicator lights in the cappuccino and latte macchiato buttons turn off. T o use the steam function, push the cappuccino or latte macchiato button. The l[...]

Example : Set the On-time to 6:15 AM and program the S9OT not to turn on automatically on Sundays. COFFEE READY • Push the Rotary Dial until the display shows MAINTENANCE . • T urn the Dial until the display shows UNIT ON/OFF . • Push the Dial UNIT ON --.-- , push again UNIT ON --.-- . • T ur n the dial to set the hours UNIT ON 6:00 AM and [...]

CAUTION / WARNING In the setting INIT RINSE AUTO the machine will automatically dispense hot water through the Dual Cof fee Spouts. Please keep children and pets away! Cappuccino rinse cycle ( CAPP RINSE ) The S9 OT is factory-set to immediately remind you to run a rinse cycle after milk use (chapter 10g). This function can be re-pr ogrammed to rem[...]

can resume br ewing coffee. Make sure the Dual Cof fee Spouts are moved upwar ds. Carefully lift and pull out the removable drawer (Fig. 18 and 19). TRA Y MISSING . There is water in the drawer . Empty the drawer and the used coffee container , assemble and replace. Make sure the two metal contacts of the drawer are clean and dry . Please note: If [...]

If you push the Rotary Dial to enter one of the above programs, the display guides you through the necessary steps. Please note: If the display shows MAINTENANCE and you do not select one of the above programs within five seconds, the S9 OT will return to COFFEE READY . Example: Run a manual hot water rinse cycle. COFFEE READY . • Push the Rotary[...]

If you use the frothXpr ess extensively or for got to clean it, milk fat starts building up inside the frothXpr ess. In this case use the Cappuccino Cleaner liquid in the W elcome Pack. Run a CLEAN CAPPUCCINO cycle as follows: COFFEE READY . • Push the Rotary Dial until the display shows MAINTENANCE . • Push the Dial again, CLEAN CAPPUCCINO . ?[...]

exit the program. In this case the S9 OT will r emind you with the message CLEAN MACHINE . 2. Make sure that the water container is at least half full. 3. Push the Rinse Button. EMPTY TRA Y . 4. Remove and empty the tray and the used coffee container and replace. Attention: If the tray and the used coffee container ar e already empty , you still ne[...]

17.1 DECALCIFYING PROCEDURE COFFEE READY / DECALCIFY MACHINE 1. Push the Rinse button until display shows DURA TION 45 MIN. / ST ART YES . Please note : T o start at a later time, tur n the Rotary Dial to ST ART NO and push the Rotary Dial. The machine will still display COFFEE READY / DECALCIFY MACHINE . 2. Push the Rinse button again, display sho[...]

18. TIPS FOR BETTER COFFEE Height adjustable coffee-spout Adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 7 "Adjusting the Grinder ." Pre-warm cups Pre-warm cups in advance with hot water (chapter 9a). Sugar and cream W armth is lost by stirring the contents of the cup. Adding milk or cream[...]

B. THE DISPLA Y READS " FILL WA TER T ANK " BUT THERE IS ENOUGH WA TER IN THE W A TER T ANK. Reason: The floatation device (Fig.1,4) is stuck or missing. Solution: Clean the water container and make sure the floatation device moves freely . Solution: Within the water tank is a small compartment (like a mouse trap). Inside is a small black[...]

• Special Cleaning T ablets (two included) Model #62205. Tip: If you brew 10 cups a day you need about one tablet every 3 weeks. Always keep extra tablets available. • Auto-Cappuccino Cleaner (one bottle included). Model #63801 Tip: If you use the auto cappuccino cleaner every other day you need a new bottle every 5 weeks. • Decalcifying tabl[...]

set forth above and no person is authorized to assume for JURA-CAPRESSO any other liability in connection with the sale of the machine. JURA-CAPRESSO expressly disclaims liability for incidental and consequential damages caused by the machine. The terms "incidental damages" refer to the loss of the original purchasers time, loss of the us[...]

Jura-Capresso Inc. 81 Ruckman Road, Closter , NJ 07624 201-767-3999 • Fax: 201-767-9684 Customer Service: 1-800-220-5701 Email: contact@capr esso.com • W ebsite: www .capresso.com[...]